Engineering Tech GT Engineering Principals & Applications Introduction to Engineering & Technology...
-
Upload
jordan-salmon -
Category
Documents
-
view
233 -
download
1
Transcript of Engineering Tech GT Engineering Principals & Applications Introduction to Engineering & Technology...
Engineering Tech GTEngineering Principals & Applications
Introduction to Engineering & Technology Concepts
Projection Systems: Orthographic and Isometric
2
Objectives
• Orthographic Projections• View Selection• Glass Box Approach• Line Precedence• Two View Drawings• Tips
3
Orthographic Projections
• Advantage – Represent features of an object more accurately
• Example Problem
4
Orthographic Projections
• Orthographic Projections are a collection of 2-D drawings that work together to give an accurate overall representation of an object.
5
Defining the Six Principal Views or
Orthographic Views
6
Which Views to Present?
General Guidelines• Pick a Front View that is most descriptive of
object • Normally the longest dimension is chosen as the
width (or depth)• Most common combination of views is to use: – Front, Top, and Side View
• Any other view different from the Principal Views is called an Auxiliary View
7
8
Glass Box Approach
• Most powerful technique to understand orthographic projections
• Suspend the object with transparent strings inside a glass box
• Freeze the view from each direction (each of the six sides of the box) and unfold the box
• Animation illustrates glass-box approach
10
Glass Box Approach
11
Glass Box Approach
12
Glass Box Approach
13
Glass Box Approach
14
Glass Box Approach
15
Glass Box Approach
17
Conventional Orthographic Views
Height
Depth
Width
Front View
Top View
Right Side View
18
Is The Orthographic View OK?
19
Orthographic Must Be In Projection
20
Hidden and Center Lines
• Hidden Line – used to represent features that cannot be seen in the current view
• Centerlines – used to represent symmetry and to mark the center of circles and the axes of cylinders, and the axes of symmetrical parts, such as cylinders and bolts
21
For Example:
1. Visible
2. Hidden3. Center
22
• Visible lines take precedence over all other lines
• Hidden lines and cutting plane lines take precedence over center lines
• Center lines have lowest precedence
Precedence of Lines
23
Example: Application of Precedence
24
Intersecting Lines in Orthographic Projections
Solid Line Intersections
Dashed Line Intersections
Gap
25
Two-View Drawings
• Some objects can be fully described by two views, look for:
– Symmetry or Bodies of Rotation
Front View Right Side View
Front View
Right Side
26
Other Two-View Examples
27
Summary
• Introduced to orthographic projections
• We recommend the software animation exercise introduced in class. Animation can be found on my website.
29
Hints for Orthographic Projection Sketching
• Identify the major features and overall dimensions of the object
• Do not use any straight-edge devices as a pencil guide when sketching by hand
• Start by drawing bounding boxes with light construction lines.
• Keep views aligned while sketching
30
Hints for Orthographic Projection Sketching
• Title Information is required – follow conventions
• Usage of construction lines is encouraged.
– Mandatory for circle or ellipse
• Orthographic projection:
– Alignment of the views is important!
– You will lose points, if not aligned