ENGINEERING EDUCATION TRAINING DIVISION - parsitek.comparsitek.com/dl/n/mohandesi cussons.pdf ·...
Transcript of ENGINEERING EDUCATION TRAINING DIVISION - parsitek.comparsitek.com/dl/n/mohandesi cussons.pdf ·...
TECHNOLOGYcussons
g
ENG INEER ING EDUCAT ION&
TRA IN ING D IV I S ION
TECHNOLOGYcussons
g
Thermodynamics & Steam Engineering Automotive Engineering Mechanics of Fluids
Cussons Technology Ltd, founded in 1876, is a company specialising in educational technology,manufacturing and supplying a comprehensive range of mechanical engineering and research equipment for universities, technical institutes and training establishments worldwide.
The company grew substantially with the expansion of Engineering teaching, particularly in the UK and Europe, and in 1964 Cussons Technology joined forces with Ricardo Consulting Engineers to enhance the educational range and introduce automotive research equipment & facilities for Universities & Industry. Thus Cussons became a world leader in education,research, test and measurement with a philosophy of providing excellent design, reliability & support for clients worldwide.
Our founder George Cussons Snr was a pioneer,recognising that student involvement in an experimentrather than just telling or demonstrating was the best way to allow full understanding.
Cussons equipment for teaching & training continues to embrace this principle, but now with modern computer technology. The equipment stays faithful in giving students access to its operation, thus allowing creativity to evolve.
There is no real substitute for hands-on experience of,for example engines & gas turbines and to see basic principles in operation. Student engineers will graduate
& eventually design their products with computers. Hence it is essential that there is early practical understanding of all engineering areas which will confront them throughout their career.
The subject areas we specialise in are – Thermodynamics – including Heat Transfer, Refrigeration and Air Conditioning, Steam Engineering, Automotive Technology, Fluid Mechanics, Process Control &Instrumentation, Theory of Machines & Applied Mechanics, plus a newly launched Renewable Energy Range- covering Wind, Wave, Tidal and Solar Energy studies.
In addition we also specialise in educational and research equipment for Marine Hydrodynamics, Naval Architecture and Maritime Studies.
In addition to supplying individual items of equipment in these subject areas, Cussons also undertake complete turnkey projects for the design, supply, installation and commissioning of entire laboratories, specialising in those for steam and automotive engineering. We are fully ISO 9001 compliant.
Full details are available on our website at www.cussons.co.uk.
1
TECHNOLOGYcussons
g
Machines, Strength of Materials,Structures & Visual Aids Renewable Energy & Control Engineering Marine Hydrodynamics
Contents
Page 1: Introduction Cussons technology
Page 3-4: thermodynamics and steam engineering
Page 5-6: Automotive engineering
Page 7-8: Mechanics of Fluids
Page 9-10: theory of Machines, strength of Materials, structures and Visual Aids
Page 11-12: Renewable energy & Control engineering
Page 13-14: Marine Hydrodynamics
2
TECHNOLOGYcussons
g
*
*
*Can accept data logging
tHeRMoDYnAMICs &steAM enGIneeRInG
Thermodynamics is a branch of physical science concerned with the inter-relationship and inter-conversion of different forms of energy. The student can observe the laws of thermodynamics by conducting experimental work on a wide range of our products. A good practical understanding of air conditioning, refrigeration, work and heat transfer can be achieved with the use of various types of heat engine. An essential subject area concerns steam properties and steam turbine technology and Cussons offers a range of bench mounted steam property teaching products along with a range of complete working steam power plant up to 20kW with features representing current industrial practice.
steAM enGIneeRInG
steAM PoWeR PLAnts
P7669R/P7669TP7690/ 96P7600/ 55
Miniature Steam Power Plant (Steam Engine or Turbine)Steam Power Plant*Steam Power Plant rated at 5kW, 10 kW and 20kW comprising(main items): Steam Boiler ( oil /gas); Turbine Condenser Unit;Superheater ( oil/Gas); Water Treatment Set; Cooling Tower;Tanks Set ( Oil/ Gas); Separating & Throttling Calorimeter;Laboratory Design Data Acquisition Facility
AnCILLARY eQUIPMent
P7660P8385
Separating & Throttling CalorimeterCombustion and Flue Gas Emissions Analyser
steAM eXPeRIMents
P7670/ P7682P7670P7671P7672P7673P7674P7675P7676P7677P7678P7681P7683P7682P7665
Steam Bench Experiments comprising :Steam Boiler BenchPressure/Temperature Vessel BenchSeparating and Throttling Calorimeter Bench.Lagging Experiments BenchEjector BenchCondenser BenchReciprocating Steam Engine BenchWater Treatment BenchProcess Plant BenchNozzle Rig BenchDouble Effect Evaporator BenchPipe Closure UnitBoiler Control & Fault Simulator
*Can accept data logging
Automotive Engineering Mechanics of Fluids
5kW Steam Power Plant
3
TECHNOLOGYcussons
g
*Can accept data logging
*
*
*
*
P5670P5698P5750/ P5753P5751P5732P5735P5721P5724P5725P5750P5811P5698
Air to Water PumpAir Conditioning Unit *Vapour Compression Refrigerator and Heat pump Apparatus *PC & Software for P5750Commercial Refrigeration Build BenchRefrigeration Wiring Skill BenchCommercial Refrigeration TrainerCompressor Control TrainerRefrigeration Control SimulatorVapour Compression Refrigerator and Heat Pump Apparatus *Industrial Air Conditioning Control SimulatorAir Conditioning Unit *Air To Water Heat Pump *
P7669 Miniature Steam Plant
Renewable Energy & Control Engineering Marine Hydrodynamics
P5750 Vapour CompressionRefrigerator and Heat Pump
Apparatus
Machines, Strength of Materials,Structures & Visual Aids
Steam Power Plant with Steam Bench Experiments
tHeRMoDYnAMICs
ReFRIGeRAtIon & AIR ConDItIonInG
P5670P5698P5750/ P5753P5751P5732P5735P5721P5724P5725P5750P5811P5698P5670
Air to Water PumpAir Conditioning Unit *Vapour Compression Refrigerator and Heat pump Apparatus *PC & Software for P5750Commercial Refrigeration Build BenchRefrigeration Wiring Skill BenchCommercial Refrigeration TrainerCompressor Control TrainerRefrigeration Control SimulatorVapour Compression Refrigerator and Heat Pump Apparatus *Industrial Air Conditioning Control SimulatorAir Conditioning Unit *Air To Water Heat Pump *
HeAt tRAnsFeR
P3210P3212P3213P3300P5687P5697
Cross Flow Heat Transfer Bench*Parallel Flow Heat ExchangerMixed Flow Heat ExchangerThermal Radiation and Natural Convection ApparatusThermal Conductivity ApparatusBoiling Heat Transfer Apparatus
WoRK tRAnsFeR
P5691P5689P5780 /P5780P9005P9010/ P9010P9015/ P9015P9050P9053P9080
Stirling Cycle Hot Air EngineThermo-Electric EngineThermodynamic TrainerTwo Shaft Gas Turbine*Turbojet Engine Test StandRamjet Engine Test StandTwo Stage Reciprocating Air Compressor*Hardware, Software, and PC interface for PV DiagramGenerationEnergy Balance Apparatus
soLAR eneRGY
P7130/35P7140/41P9060
Solar Distillation Apparatus (basin and thin film types)Solar Energy Apparatus*Photovoltaic Solar Power Unit
GeneRAL
P4810P4811P4812P5631P5700P5615P6310P5656
Temperature Measuring ApparatusPressure Measurement BenchHumidity Measuring BenchMechanical Equivalent of HeatMarcet BoilerBoys Gas CalorimeterCalorific Value of Fuels SetPensky- Martens Flash Point Tester
*Can accept data logging
4
TECHNOLOGYcussons
g
P8615 Gasoline P8616 Turbo diesel
6 90 kW AC regen 7 150 kW Eddy Current
5 Manual 6 Computer
N Not included (Standard) I Included
N Not included (Standard) I Included (Oil & Coolant)
W Included with weights I Included (Standard)
N Not included I Included - Large (Standard)
N Not included (Standard) B Blast air cooler (P87#0 only option) C Cooling tower (P87#0 only option)
Example P8750 / INWNC denotes an engine test bed with the following. i. 150kw eddy current dynamometer ii. Manual control iii. Installation materials iv Standard engine fluid flow meters v Dyno calibration equipment with weights vi Without air flow meter vii Cooling tower
enGIne test BeD seLeCtIon MAtRIX
Engine
Intercooler, pipework & plant water connections called up with engine
Dynamometer
Control
Installation Materials
engine fluid flow meters
Dyno Calibration equipment
Air flow meter
Cooling water
P 8 # # 0 / # # # # #
P8652 Engine Test Beds
5
Mechanics of Fluids Machines, Strength of Materials,Structures & Visual Aids
AUtoMotIVe enGIneeRInG
For over sixty years, Cussons Technology has been associated with Ricardo Consulting Engineers, world renowned for their work in Engine and Fuels Development. Engines are mounted on test beds for a wide variety of reasons, in particular for students’ use in engine investigation, academic and vocational training as well as research projects. Cussons offers a most comprehensive range of engine test beds specifically designed for student investigations with any level of control from manual to comprehensive computer systems. Instrumentation is available either with supplied test beds or stand-alone and includes air flow, fuel flow, temperature measurement, torque, speed, emissions measurement etc. Through extensive experience with the automotive industry Cussons has a full understanding of requirements in education and has completed several hundred installations world-wide from the simplest test bed to major engine test facilities on a turnkey basis.
TECHNOLOGYcussons
g
enGIne test BeDs
P8952/81P8250P8150P8160P8170P8000 Series
AutotrainersAutomotive 1 Engine Test BedAutomotive 3 Engine Test BedSingle Cylinder Engine Test Bed *Twin Cylinder Engine Test Bed *Multi Cylinder Engine Test Bed * (please refer to matrix on Page 5)
ReseARCH AnD DeVeLoPMent
P8800/02
P8820/ P8890P8300
Hydra Light Duty Single Cylinder Research Engine Test Beds( Manual or Computer Controlled)Hydra Research Engines & AccessoriesComputer Controlled Universal 2 stroke Engine Test Facility
InstRUMentAtIon AnD ACCessoRIes
P8261/65P4600/P4660P8227P8360/73P8390P7300/2P7305/10P7200/17P7032P7025P8385P4010P2200/35
Exhaust Gas CalorimetersElectric Indicating System – Petrol/ Diesel*Volumetric Fuel Flow MetersBlowby Meters (analogue and digital)Exhaust Gas Analyser*Swirl Meters DisplayImpulse Swirl Meter with Port Flow Rig And DisplayLaminar Flow MetersAirflow Measurement and Data Acquisition SystemManometers for LFM’sCombustion and Fuel Gas AnalyserIso Nozzle Flow MeasurementSectioned Automotive Equipment (see Engineering, Drawing &Design Section)
*Can accept data logging
6
Marine Hydrodynamics Instrumentation and AccessoriesRenewable Energy & Control Engineering
P8250 Automotive 1 Engine Test Bed
P8952 - P8981 Auto Trainers (Running stands)
Ricardo Hydra Single Cylinder Research Engine Facility
TECHNOLOGYcussons
g
Hydraulic Basic studies equipment
Hyd
raul
ics
benc
h
Con
stant
Hea
d
Inle
t Tan
k
Varia
ble
Hea
d
Out
let T
ank
Feed
Blo
ck
Man
omet
er
Hoo
k G
auge
and
Scal
e
Rota
met
er
Wat
t Met
er
experiments P6100 P6103 P6104 P6105 P6106 P6107 P6108 P6109
P6220 Laminar Flows Apparatus
P6221 Losses in Pipes and Fittings
P6222 Entry/Exit & Cont/Expansion Losses
P6223/4 Orifice Experiments Basic / Advanced
P6225/6 Weir Experiments Basic / Advanced
P6227 Venturi Meter
P6228 Orifice Plate Experiment
P6229 Turbine Meter
P6230 Pitot Static Tube
P6249 Miniature Flow Channel
P6231 Bernouilli's Theorem
P6232 Hydraulic Ram
P6233 Impact of Jets
P6234 Calibration of Pressure Gauge
P6235/6 Metacentric Height
P6237 Centre of Pressure
P6238 Free and Forced Vortex
P6239 Comparison of Flow Measurements
P6240 Pelton Wheel
Key
required accessories
only required if customer does not have bench.
optional accessories
Machines, Strength of Materials, Structures & Visual Aids Renewable Energy & Control Engineering
FLUID MeCHAnICs
Equipment is of modular design to enable additions to be made to an initial purchase at a later date. Clear visual appreciation of the principles of fluid mechanics is the objective of this design combined with instrumentation which allows a complete range of experimental work to be completed. A basic hydraulics bench service unit provides the self contained water supply and facilities to mount a wide range of experiments. In addition other units cater for hydrostatics, hydraulic machinery and a variety of water pump test sets.
Air flow work is conducted using the Cussons Airflow Bench which is designed to be extremely versatile in the study of aerodynamics and air flow studies.
All equipment is made to be robust and as portable as possible.
P6100 Hydraulics Bench with P6221 Losses in Pipe Fittings with Accessories
7
TECHNOLOGYcussons
g
*
*
*
P6290 Francis Turbine
P6255 Flow Channel
Weir in P6255 Flow Channel
Dam in P6255 Flow Channel
Thermodynamics & Steam Engineering Automotive Engineering
8
Marine Hydrodynamics
P3230 Wind Tunnel with P3200Air Flow Bench
HYDRAULIC APPLIeD stUDIes
P6135P5160P6242/3P6245P6255P6246P6247P6360/66P6248P6510P6515P6520/ 21P6530/ 31P6540P2265/ 71P6238P6275P6410P6290
Series/Parallel Pump Test SetFriction Loss In PipesHydrostatic BenchFlow Channel – 2.5mFlow Channel – 5.0mHele ShawWater Flow VisualizationModular Pump Test Set*Osborne Reynolds ApparatusNetwork of Pipes ApparatusPipes Surge and Water Hammer ApparatusPermeability ApparatusHydrology ApparatusSedimentation Transport ApparatusSectioned Equipment (see Visual Aids Section)Free & Forced Vortex300 x 450 mm Flow Channel600 x 500 mm Flow ChannelFrancis Turbine
AIR FLoW
P3200 AIR FLoW BenCH*
P3202/ 07 ACCessoRIes
P3202P3203P3204
Multitube ManometerFlow Measurement ApparatusAnemometer
P3208/ 34 eXPeRIMents
P3208P3222P3224P3230P3240P3211P3205/6/7
P3231P3232P3233P3234
Bernouilli ApparatusFlow Round a BenchFlow in PipesWind TunnelFan Test SetPC Computer, Software and InterfaceData Logging Packages for Air Flow Bench, Multiple Pressure and Two Component BalanceTwo Component BalanceBoundary LayerSmoke GeneratorTurbulent Jet
WInD tUnneL
P3260P3262/62eP3270/9P3281/84P7141
Wind Tunnel (304 x 304mm)*Two Component BalanceModels for Drag and LiftAir Flow ExperimentsData Acquisition System
*Can accept data logging
TECHNOLOGYcussons
g
Renewable Energy & Control Engineering Marine Hydrodynamics
9
P1901 Torsional Vibration Apparatus
VIsUAL AIDs
P1091/1113P1121/1140P1001/1087P2199/2301
Models of PenetrationPractical Plane & Solid Geometry ModelsEngineering Drawing ModelsSectioned Equipment, Including:Motor Vehicle Engines And Components; Valves and Steam plants;Refrigeration and Air Conditioning Components; Pumps.
tHeoRY oF MACHInes
P1150P1901P1906P2072P5464P2776P5226P2799P5428P5000P5013/15
P5377
Static & Dynamic Balancing MachineTorsional Vibrations ApparatusLinear Vibration ApparatusFletcher Trolley ApparatusInclined Plane/Sliding Friction ApparatusEnergy of FlywheelAngular Acceleration ApparatusCentripetal Force ApparatusWhirling of Shafts ApparatusFree and Forced Vibration Apparatus with DampingJournal Friction Apparatus with P5014 Pressure Distribution Apparatus and P5015 Bearing Attitude ApparatusElectrical Gyroscope complete with Digital Tachometer
tHeoRY oF MACHInes, stRenGtH oF MAteRIALs,
stRUCtURes & VIsUAL AIDs
The important area of dynamics, balancing, vibrations, whirling and other basic principles of applied mechanics are fully covered using this range of products. The designs have been evolved by academic institutions over a long period to fulfil the requirements of a typical curriculum.
Simple studies through to advanced investigations are possible and each piece of equipment is supplied with comprehensive manuals as in all Cussons equipment.
TECHNOLOGYcussons
g
**
**
**
**
**
**
Automotive Engineering Mechanics of Fluids
10
P5000 Free and Forced Vibration apparatus
stRenGtH oF MAteRIALs
P5030P4334/7P2180/1P2777
Universal Testing MachineTorsion ApparatusExtension and Compression of SpringsHanger and Masses
stRUCtURes
P1206P4125P4126P4127P4128P4130P4131P4132P4133P4134P4135P4140P4141P4120P4121P4122
Rubber Block ApparatusDeflection of Beams*Buckling of Struts*Measurement of Shear Forces*Measurement of Bending Moment*Rigidly Supported Arch*Two Hinged Arch*Three Hinged Arch*Suspension Bridge*Forces in a Truss*Portal Frame*Plastic Deflection of Beam*Plastic Deflection of Portal*Universal Bench Mounted FrameData Acquisition/Computer Interface ModulePC & Software
*Can accept data logging
Thermodynamics & Steam Engineering
P5377 Gyroscope
TECHNOLOGYcussons
g
*
***
*
Marine Hydrodynamics Thermodynamics & Steam Engineering
P3005 Process Control Simulator
ContRoL enGIneeRInG
P3005P3009P3010P3012P3015P3016P3020P3025P3030P3035P3040P3510/P3519P6180/P6188
Process Control Simulator*Pressure Control ApparatusFlow Control Apparatus - 3 Term Electronic*Flow Control Apparatus - 3 Term Pneumatic*Level Control Apparatus - 3 Term Electronic*Level Control Apparatus - 3 Term PneumaticAcidity (pH) ApparatusComputer Control Software and Data Logging InterfacProgrammable Logic Control ModuleTemperature Control Apparatus - 3 Term Electronic*Additional Control ModulePneumatic Circuit Training RigHydraulic Circuit Training Rig
*Can accept data logging
ReneWABLe eneRGY & ContRoL enGIneeRInG
A practical understanding of control engineering is essential in most industries. The Cussons range of control engineering products presents the students with a broad cross section of control techniques and typical applications used in practice.
The products demonstrate the function of individual components of control loops and allow the student to change parameters observing effects and to follow a full experimental programme using the manuals provided.
The area of Renewable Energy have received massive attention in recent times and in response to this we have developed a new range of products covering Wind, Wave, Tidal and Solar Energy Studies. In addition we have also launched a demonstration Fuel Cell.
11
P3020 Ratio Control
TECHNOLOGYcussons
g
P9040 Fuel Cell
Mechanics of Fluids Machines, Strength of Materials,Structures & Visual Aids
P3130A Wind Turbine
ReneWABLe eneRGIes
WInD eneRGY
P3130A
P3131AP3133A
P3135A
P3136AP3137A
Wind Turbine Demonstrator comprising Wind Generator, Base plate & Control Panel (NB Wind Turbine not supplied)Wind Turbine - 3 Blades, Instrumented Strut (V.I.)Wind Turbine - 3 Blades, Instrumented Strut (V.I.),2 Instrumented Blades (Torque & Thrust) via telemetryControl Unit where customer has existing Wind Channel/Generator*2/4 Blade Wind Turbine, un-instrumented2/4/Blade Wind Turbine, instrumented (2 blades only -Torque & Thrust)
tIDAL eneRGY
P6390 Tidal Turbine Dynamometer*
soLAR eneRGY
P9060P7140/41P7130/35
Photovoltaic Solar Power UnitSolar Energy Apparatus*Solar Distillation Still
FUeL CeLLs
P9040 Fuel Cell Demonstration Unit*
*Can accept data logging
12
Automotive Engineering
TECHNOLOGYcussons
g
MARIne HYDRoDYnAMICs ReseARCH RAnGe
The Cussons Technology Marine Hydrodynamic Research Systems Division was founded following the acquisition of Kempf and Remmers.
Kempf and Remmers commanded universal recognition for excellence in the design and manufacture of a wide range of specialised force measurement instrumentation and test facilities systems for the marine hydrodynamic research sector. These facilities are principally employed in the evaluation of hull designs, propulsion systems and sea-keeping characteristics of a wide range of surface and sub-surface vessels and other marine structures.
Combining the skills and experience of Cussons Technology in design, manufacture, installation and operation of projects with the Kempf and Remmers business, created the world’s most formidable force to serve the Marine Hydrodynamic research establishments.
13
Cussons are able to provide clients with all of the requirements for Marine Hydrodynamic Research and Development from spare parts to facility upgrades; from instrumentation to complete turnkey facilities.
This Specialised division based within the UK’s key hydrodynamic research facility at QinetiQ Haslar, Portsmouth. Our offices are located within Froude’s original Haslar tank
on the site that is now part of the Haslar Marine Technology Park. At this location Cussons have access to the one of most up to date Marine Hydrodynamic Research facility and have access to the research teams who are continually evolving new techniques, product ideas and moving the subject area forward, all of which is of benefit to Cussons’ clients.
MARIne HYDRoDYnAMICs ReseARCH RAnGe
Cavitation tunnels & Circulating Water Channels
Small Educational / Research Cavitation Tunnel from 200 to 300mm Square SectionMedium Size Research Cavitation Tunnels from 400 to 600mm Square SectionMedium Size High Speed Research Cavitation Tunnels 500 to 750mm DiameterLarge Research Cavitation Tunnel / CWC from 1m Section upwards
towing Carriages
Small Research Grade Towing Carriage designs to suit a towing tank from 4 to 6m WideMedium Research Grade including High Speed Carriages design for tanks from 6 to 10m wide.Large Research Grade Carriage designed for tanks form 10 to 16mOcean Basin / CPMMC Carriage up to 35m
Research Dynamometer / Balances
Open Water Propellers for use in Tanks & TunnelOpen Water Contra Rotating Propeller Dynamometers for use in Tanks & Tunnels .Non Water tight Self-propulsion Dynamometer for use in Towing TanksWater / Pressure tight Self-propulsion Dynamometer for use in Tanks and Large TunnelsPodded Propeller DynamometersResistance Dynamometers for use in Towing TanksMulti Component Balance measuring forces & moments on models in tanks & TunnelsRudder Steering Dynamometers for use in Tank & TunnelsCarriage Mounted Wave Probes2D & 3D Wake Measuring Equipment / Rakes for use in Tanks & Tunnels
Wavemakers & Wave Absorbing Beaches
Large Single Element, Duplex or Multi- Element Regular and Irregular Wave MakerLarge Tenable Wave Absorbing Beach
Model Manufacture
CNC 3 / 5 Axis Ship Model Milling Machines from 3m upto 14mTraditional K&R Propeller Drill Point Measuring Machine
TECHNOLOGYcussons
g
MARIne HYDRoDYnAMICs
eDUCAtIonAL RAnGe
Cussons Technology has built on the success of its Kempf & Remmers Range of Research Hydrodynamics test equipment and its knowledge of tertiary educational engineering equipment to produce a new range of Educational hydrodynamic equipment to complement smaller facilities. The Equipment is designed to be robust for student use, and consistent in its results and accuracy as many of the components are inherited from the Kempf & Remmers Range. The Purpose is to allow the lecturer demonstrations to be carried out with ease, and for the students to undertake a range of experiments with repeatable results and reasonable accuracy.
The Products are design to be cost effective and complementary. Each product can be sold as individual product range, but when supplied within a complete facility some savings can be achieved by the use of a common data acquisition system.
14
MARIne HYDRoDYnAMICs eDUCAtIonAL RAnGe NEW
educational Cavitation tunnels
K14K14EK17EK23
Educational/Research Cavitation TunnelEducational Cavitation Tunnel.Small Educational Cavitation Tunnel.Small Research Cavitation Tunnel / CWC
educational Range Cavitation tunnel Dynamometer
N11ER25ER30ER35
Wake rake with integrated pressure transducers for use TunnelsExternal Mounted Dynamometer for use in TunnelsWater Tight 3 Component Balance for use in TunnelsWater Tight Single Component Balance for use in TunnelsPitot Static Tube for use in measuring section of TunnelHigh Speed / Frame Rate Camera system for observing cavitation.Flat Plate and Cylinder Model Experiment for use in Tunnels
educational towing Carriages
C15eC20eC30eC40e
Educational Towing Carriage design to suit a towing tank 1.5m wideEducational Towing Carriage design to suit a towing tank 2m wide.Educational Towing Carriage design to suit a towing tank 3m wide.Educational Towing Carriage design to suit a towing tank 4m wide.
educational Range Dynamometer and Instruments
H75EN10ER23ER42 / R43R28ER35ER75EV110EV122EV140E
Open Water Propeller / Turbine DynamometerWake rake with integrated pressure transducersSmall Carriage Mounted Wave probe equipmentTraditional K&R Self-propulsion Dynamometer for small modelsSmall Model Alignment / Guiding ArmsResistance Dynamometer and Towing postShip model Self Propulsion DynamometerDynamic Ship stability dynamometerStationary High Speed Camera systemEducational Modular Ship
educational Wavemakers & Wave Absorbing Beaches
W15E-W40EW15EB-W40EB
Wet Back Hinge Flap Regular and Irregular Wave MakerTuneable Wave Absorbing Beach
Model Manufacture
B20E to B40EB2-1ED25R1-20E or 30E
Small CNC 3 Axis Ship Model Milling MachinesSmall Stern Tube Drilling MachineTraditional K&R Propeller Drill Point Measuring MachineShip Model Moment of Inertia Apparatus
TECHNOLOGYcussons
g
• Marine Hydrodynamic systems
• Automotive Research and Developmenttest beds, control, data acquisition, exhaustemissions, cvs and other related instrumentation
• Integrated facilities for R&D projects inAerospace, oil and Military sectors
• Analysis and purification of gases forvarious industries
This brochure features those products and services offeredthrough the Education and Training Division. Otherdivisions within Cussons Technology deal with
Head office - Cussons technology LimitedCussons Technology, 102 Great Clowes Street, Manchester, M7 1RH
Tel: +44 (0)161 833 0036 Fax: +44 (0)161 834 4688Email: [email protected]
Kempf & Remmers Marine Research systems DivisionCussons Technology, Haslar Marine Technology Park, Haslar Road, Gosport, PO12 2AU
Tel: +44 (0)2392 603960 Fax: +44 (0)779 2662102Email: [email protected]
Internethttp://www.cussons.co.uk
Thanks to The Abbey College Manchester and Stockport College of Technology for the use of photographs in this brochure
Guide/TD 10.08