ENGINEERING Design Check | Revie · SINO TEK ENGINEERING Website: Structural inspection for...
4
SINO TEK ENGINEERING Website: www.sinotek.co.nz Structural inspection for Stockpile Building: 250m long Works undertaken Structural analysis for th Structural analysis for th Provide structural repair Detail structural analysis Study the building behav Study the cable strengthe Investigated the strength Detail calculation for the Prepare repair detail sket Report G S In x 50m wide x 25m high, Qld he as-built building condition he corroded condition methods for the weaken members s for the repair building vior under the cyclone condition as per cyclone ca ening methods h of the corroded members e remaining strength of the corroded members tches Inside view of the building Structural model Structural | Geotechnical nspection | Engineering Design Check | Review Page 1 of 4 ategory of the Code
Transcript of ENGINEERING Design Check | Revie · SINO TEK ENGINEERING Website: Structural inspection for...
SINOTEK
ENGINEERING
Website: www.sinotek.co.nz
Structural inspection for
Stockpile Building: 250m long x 50m wide x 25m high, Qld
Works undertaken
Structural analysis for the as
Structural analysis for the corroded condition
Provide structural repair methods for the weaken members
Detail structural analysis for the repair building
Study the building behavior under the cyclone condition as per cyclone category of the Code
Study the cable strengthening methods
Investigated the strength
Detail calculation for the remaining strength of the corroded members
Prepare repair detail sketches
Report
ENGINEERING
Structural
Inspection
Stockpile Building: 250m long x 50m wide x 25m high, Qld
Structural analysis for the as-built building condition
Structural analysis for the corroded condition
structural repair methods for the weaken members
Detail structural analysis for the repair building
Study the building behavior under the cyclone condition as per cyclone category of the Code
Study the cable strengthening methods
Investigated the strength of the corroded members
Detail calculation for the remaining strength of the corroded members
Prepare repair detail sketches
Inside view of the building
Structural model
Structural | Geotechnical
Inspection | Engineering
Design Check | Review
Page 1 of 4
Study the building behavior under the cyclone condition as per cyclone category of the Code
SINOTEK
ENGINEERING
Structural | Geotechnical
Inspection | Engineering
Design Check | Review
Website: www.sinotek.co.nz Page 2 of 4
Roof cables subjected to left wind
Roof cables subjected to right wind
SINOTEK
ENGINEERING
Structural | Geotechnical
Inspection | Engineering
Design Check | Review
Website: www.sinotek.co.nz Page 3 of 4
Thickness test location 1 to 3 for corroded members
Thickness test location 4 to 6 for corroded members
Thickness test location 7 to 11 for corroded members
Thickness test location 8 to 12 for corroded members
Thickness test location 13 to 19 for corroded members
SINOTEK
ENGINEERING
Structural | Geotechnical
Inspection | Engineering
Design Check | Review
Website: www.sinotek.co.nz Page 4 of 4
Thickness test location 20 for corroded members
Thickness test location 21 for corroded members
Thickness test location 22 for corroded members
