Engineering Catalogue Engineering Catalogue -...
Transcript of Engineering Catalogue Engineering Catalogue -...
Journals 2012-2013
www.elsevier.com/engineeringScan this QR
code with your smartphone to find out more
MA
KE AN IMPAC
T
2011IMPACT FACTO
R
Latest Impact Factors
1
Page
Computational engineering 1
Civil and structural engineering 3
Coastal engineering 7
Aerospace engineering 8
Acoustics 10
Electrical and electronic engineering 11
Industrial/manufacturing engineering 13
Solid mechanics 19
Thermal and fluid science 25
Chemical engineering 28
Control engineering and signal processing 29
For full aims and scope, to submit your article or subscribe, visit the journal homepages.
Impact Factor data ©Journal Citation Reports 2012, published by Thomson Reuters
Computer Methods inApplied Mechanics andEngineeringPublishes original papers at the forefront of modernresearch describing significant developments ofcomputational methods in solving problems ofapplied mechanics and engineering.Editors:T. J. R. Hughes, University of Texas at Austin, USA
J. Tinsley Oden, University of Texas at Austin, USA M. Papadrakakis, National Technical University, Greece
ISSN: 0045-7825
www.elsevier.com/locate/cma
Computers & StructuresPublishes advances in the development and use ofcomputational methods for the solution of problemsin engineering and the sciences. The range ofappropriate contributions includes papers onestablishing appropriate mathematical models andtheir numerical solution in all areas of mechanics. Thejournal also includes articles that present a substantialreview of a field in the topics of the journal.Co-Editors:
K. J. Bathe, Massachusetts Institute of Technology, USAB. H. V. Topping, Heriot-Watt University, UK
ISSN: 0045-7949
www.elsevier.com/locate/compstruc
Computational engineering
www.elsevier.com/engineering
ContentsHigh-quality journals covering the entire field of engineering
Welcome to Elsevier engineering journals. We publish morethan 130 high-quality titles covering the entire field ofengineering, include key journals such as Computer Methodsin Applied Mechanics and Engineering, Building andEnvironment, Journal of Sound and Vibration,International Journal of Heat and Mass Transfer, Journalof the Mechanics and Physics of Solids, InternationalJournal of Solids and Structures and Automatica.
We also proud to publish many journals on behalf of, or inassociation with, prestigious Societies, including theInternational Academy of Astronautics (Acta Astronautica),the International Association for Wind Engineering (Journal ofWind Engineering & Industrial Aerodynamics), the Societyof Manufacturing Engineers (Journal of ManufacturingSystems and Journal of Manufacturing Processes) and theInstitution of Chemical Engineers (IChemE).
We aim to provide the best possible platform for disseminationof your research, responding quickly to changes in the researchlandscape and author and reader needs. 2012 sees the launchof the Journal of Environmental Chemical Engineering andCase Studies in Engineering Failure Analysis, the first in aseries of open access case study titles. We continue to welcomeproposals for new journals that serve the requirements of theresearch community.
All Elsevier engineering journals are available online viaScienceDirect – www.sciencedirect.com – the essentialinformation resource for over 12 million researchers worldwide.As part of the Article of the Future initiative(www.articleofthefuture.com) there are an increasingnumber of options for authors to present,and readers toexplore, published research. Once such example is the recently-launched Matlab file viewer www.elsevier.com/matlab
Finally, our sincere thanks go to the authors, reviewers andeditors who continue to support the development of Elsevierand partner society engineering journals.
Louise CurtisPublishing Director – [email protected]
MA
KE AN IMPACT
2011 IMPACT FACTO
R
Impact Factor
1.874
MA
KE AN IMPACT
2011 IMPACT FACTO
R
Impact Factor
2.651
‘In existence for around three decades,Computer Methods in Applied Mechanicsand Engineering (CMAME), has becomeknown as the leading source of newdevelopments in computational engineeringand science, a field that has revolutionizedengineering and opened new vistas in manyareas of applied science. The scope of CMAMEis steadily broadening, covering issues ofcomputer modeling and simulation in not onlytraditional fields of solid and fluid mechanicsbut more recently spreading to areas ofmaterial science, biomedicine, electro-magnetics, and biology and chemistry as thesesubjects become more relevant to modernengineering science. With a unique mix ofmodern computational mathematics,important new algorithms, large-scale highperformance computing, and innovativeapplications to the most difficult problems inengineering science and applied mechanics,CMAME has become an indispensable sourceof information for researchers and students ofcomputational science worldwide.’
J. Tinsley Oden Editor, Computer Methods in Applied
Mechanics and Engineering
www.elsevier.com/engineering
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
3
‘Construction and Building Materials (JCBM)has grown over the last 20 years into the world’sleading peer reviewed journal for researchers andpractitioners contributing to Materials research andusage in civil engineering and the builtenvironment. With the urgent need for moresustainable construction, researchers haveresponded with papers reporting new technologiesand recycled materials incorporated into a range ofconcrete, steel, masonry, rammed earth, timber,bitumen/asphalt and advanced polymers andnatural fibres. Effective conservation of historicstructures is also a key growing area.
Given the huge increase in submissions in the lastfive years, the Editors have been able to be morefocused in choosing papers with a potential forhigh international impact. Authors are encouragedto submit only their best work with a significantvolume of data and analysis. They are encouragedto incorporate a critical literature review related totheir research and findings, with a significantnumber of references. Authors are also encouragedto ensure that their work is of generic value to ourinternational readership.
These substantial high impact papers are of veryreal interest to both the early career researchersand their more experienced supervisors andcolleagues – as well as international practitioners.With the support of our international Authors andReviewers, the Editors will strive to maintain rapidreviews and publishing of the best papers in theworld in this high impact factor journal (2-year IF =1.834, 5-year IF = 2.134). The Editors aim to drivethe Impact Factor of the journal, JCBM, even higherby being more selective in their choice of andacceptance of the very best papers.’
Professor Mike Forde, PhD, FREng, FRSE, FACI Editor-in-Chief Construction and Building Materials
Civil and structural engineering
www.elsevier.com/engineering2
Advances in Engineering SoftwareThe objective of this journal is to communicate recentand projected advances in computer-based engineeringtechniques.Editors: R. A. Adey, Wessex Institute of Technology, UKA. K. Noor, Old Dominion University, USAB. H. V. Topping, Heriot-Watt University, UK and University ofPécs, Hungary
ISSN: 0965-9978
www.elsevier.com/locate/advengsoft
Engineering Analysis withBoundary ElementsPublished in association with the InternationalSociety for Boundary ElementsThis journal is specifically dedicated to thedissemination of the latest developments of newengineering analysis techniques using boundaryelements and other mesh reduction methods.Editor-in-Chief: A. H.-D. Cheng, University of Mississippi, USA
Founding Editor: C. A. Brebbia, Wessex Institute of Technology, UK
ISSN: 0955-7997
www.elsevier.com/locate/enganabound
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.451
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.092
Finite Elements in Analysis and DesignAn International Journal for Innovationsin Computational Methodology andApplicationThe aim of this journal is to provide ideas andinformation involving the use of the finite elementmethod and its variants, both in scientific inquiryand in professional practice. Editors-in-Chief: J. Dolbow, Duke University, USA
T. A. Laursen, Khalifa University of Science, Technology andResearch Abu Dhabi, United Arab Emirates
ISSN: 0168-874X
www.elsevier.com/locate/finel
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.058
Construction and Building MaterialsThis journal provides an international forum for thedissemination of research and development in the fieldof construction and building materials and theirapplication in new works and repair practice. Thejournal publishes a wide range of research andapplication papers which describe laboratory and
numerical investigations or reports on full scaleprojects. Editor-in-Chief: M. C. Forde, University of Edinburgh, UK
ISSN: 0950-0618
www.elsevier.com/locate/conbuildmat
MA
KE AN IMPACT
HIG
HEST EVER IMPACT FA
CTO
R
Impact Factor
1.834
Join our Social Mediaand get involved
Find out the latest news from Elsevier
Engineering Journals, share your ideas, and
ask the questions you want to discuss with
your peers and colleagues. You can link up
from the journal homepages or from:
www.elsevier.com/engineering
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
Automation in ConstructionAn International Research JournalThis journal publishes articles on all aspectspertaining to the use of information technologiesin design, engineering, construction technologies,as well as maintenance and management ofconstructed facilities. Editor-in-Chief:
M. J. Skibniewski, University of Maryland, USA
ISSN: 0926-5805
www.elsevier.com/locate/autconMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.500
Engineering StructuresEngineering Structures provides a forum for abroad blend of scientific and technical papers toreflect the evolving needs of the structuralengineering and structural mechanics communities.Editor-in-Chief: P. L. Gould, Washington University, St Louis, MO, USA
ISSN: 0141-0296
www.elsevier.com/locate/engstruct
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.351
54
Journal of Constructional Steel ResearchThe Journal of Constructional Steel Research providesan international forum for the presentation anddiscussion of the latest developments in structuralsteel research and their applications.Editors: R. Bjorhovde, Tucson, USAJ. E. Harding, Shipston-on-Stour, UKG. A. R. Parke, University of Surrey, UK
ISSN: 0143-974X
www.elsevier.com/locate/jcsr
Thin-Walled StructuresThin-Walled Structures publishes articles concernedwith thin-walled structures or the basic problemsinherent to thin-walled structures. Provided thiscriterion is satisfied, no restriction is placed on thetype of construction, material or field ofapplication.Editor: J. Loughlan, Loughborough University, UK
ISSN: 0263-8231
www.elsevier.com/locate/tws
Journal of Wind Engineering &Industrial AerodynamicsThe Journal of the International Association forWind EngineeringPublishes material on social and economic impact ofwind effects; wind characteristics and structure, localwind environments, wind loads and structural response,diffusion, pollutant dispersion and matter transport,wind effects on building heat loss and ventilation, wind
effects on transport systems, wind power generation,and codification of wind effects.
Editor: T. Stathopoulos, Concordia University, Canada
ISSN: 0167-6105
www.elsevier.com/locate/jweia
MA
KE AN IMPACT
HIG
HEST EVER IMPACT FA
CTO
R
Impact Factor
1.252
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.119
MA
KE AN IMPACT
HIG
HEST EVER IMPACT FA
CTO
R
Impact Factor
1.251
Computers and GeotechnicsProvides an up-to-date reference to the engineers andresearchers engaged in computer aided analysis, designand research in geotechnical engineering. The journal isintended for an expeditious dissemination of newdevelopments in the broad areas of soil and rockmechanics.Editors: D. M. Potts, Imperial College London, UKS. W. Sloan, University of Newcastle, NSW, Australia
ISSN: 0266-352X
www.elsevier.com/locate/compgeo
Geotextiles andGeomembranesAn official Journal of the InternationalGeosynthetics SocietyAimed at research workers, designers, users andmanufacturers, this journal fills the need for a vehicle tobring together and discuss the rapidly growing body oftechnology in the area of geotextiles andgeomembranes.
Editor:R. Kerry Rowe, Queen’s University, Canada
ISSN: 0266-1144
www.elsevier.com/locate/geotexmem
International Journal of Rock Mechanics and Mining SciencesThis journal publishes original research, newdevelopments,site investigations, analytical andnumerical methods relating to slopes, open-pit mines,quarries, shafts, underground mines, metro systems,dams and hydro-electric stations, geothermal energy,petroleum engineering and radioactive waste disposal.Editor-in-Chief:
R. W. Zimmerman, Imperial College London, UK
ISSN: 1365-1609
www.elsevier.com/locate/ijrmms
Soil Dynamics andEarthquake EngineeringThe journal encourages and enhances the role ofmechanics and other disciplines as they relate toearthquake engineering by providing opportunitiesfor the publication of the work of appliedmathematicians, engineers and other appliedscientists involved in solving problems closelyrelated to the field of earthquake and geotechnicalengineering.
Editors-in-Chief: D. Beskos, University of Patras, GreeceA. Elgamal, University of California at San Diego, USAM. Erdik, Bogazici University, Turkey
ISSN: 0267-7261
www.elsevier.com/locate/soildyn
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.272
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.210
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.036
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.987
Journal of TerramechanicsApplication to Terrain-Machine SystemsThe Journal of Terramechanics is primarily devotedto scientific articles concerned with research,design, innovation, testing, application andutilization of off-road vehicles and soil workingmachinery and their sub-systems and components.
Editor-in-Chief: R. L. Kushwaha, University of Saskatchewan, Canada
ISSN: 0022-4898
www.elsevier.com/locate/jterra
Tunnelling and UndergroundSpace TechnologyIncorporating Trenchless TechnologyResearchAn international journal which publishes authoritativearticles encompassing the development of innovative usesof underground space and the results of high qualityresearch into improved, more cost-effective techniques forthe planning, geo-investigation, design, construction,
operation and maintenance of underground and earth-sheltered structures.
Editors:C. Rogers, University of Birmingham, UKR. Sterling, Louisiana Tech University, USAJ. Zhao, Ecole Polytechnique Fédérale de Lausanne, Switzerland
ISSN: 0886-7798
www.elsevier.com/locate/tust
MA
KE AN IMPACT
HIG
HEST EVER IMPACT FA
CTO
R
Impact Factor
1.000
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.727
Building and EnvironmentThe International Journal of Building Science and its ApplicationsBuilding and Environment is an international journalthat publishes original papers and review articles onresearch, technology and tool development relatedto building science and human interaction with thebuilt environment, as well as their applications tobuilding design and operation.Editor-in-Chief:
Q. Chen, Purdue University, USA
ISSN: 0360-1323
www.elsevier.com/locate/buildenvMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.400
www.elsevier.com/engineering
Energy and BuildingsAn international journal devoted toinvestigations of energy use andefficiency in buildingsThis journal presents new results, and new provenpractice aimed at reducing energy needs of a buildingand improving indoor environment quality. Editor-in-Chief: B. Todorovic, University of Belgrade, Serbia
ISSN: 0378-7788
www.elsevier.com/locate/enbuild
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.386
Sustainable Cities and SocietyNow in its second year of publication, this journalfocuses on research and multi-disciplinary work aimingto reduce the environmental and societal impact offuture cities. Topics include design, modelling, analyticaltools, testing/experimental work, optimization,environmental assessment, new codes, regulations,policy, economics, monitoring, post occupancyevaluation and legislation related to sustainable cities.Editor-in-Chief: S. Riffat, University of Nottingham, UK
ISSN 2210-6707
www.elsevier.com/locate/scs
76
Coastal EngineeringAn International Journal for Coastal,Harbour and Offshore EngineersThis international journal combines practicalapplication with modern technological and scientificachievements. It is indispensable reading forengineers working in the field of marine and coastaltechnology. Editor-in-Chief:H. F. Burcharth, Aalborg University, Denmark
ISSN: 0378-3839
www.elsevier.com/locate/coastaleng
Ocean Engineering An International Journal of Researchand DevelopmentOcean Engineering provides a medium for thepublication of original research and developmentwork in this field.Editor-in-Chief: A. Incecik, Universities of Glasgow and Strathclyde, UK
ISSN: 0029-8018
www.elsevier.com/locate/oceaneng
Coastal engineering
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.757
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.178
www.elsevier.com/engineering
Applied Ocean ResearchThe aim of Applied Ocean Research is toencourage the submission of papers that advancethe state of knowledge in a range of topicsrelevant to ocean engineering. For a full list of thetopics this journal covers please visit the journalhomepage – details listed below.Editors:M. Kashiwagi, Osaka University, JapanB. Molin, École Centrale de Marseille, France
ISSN: 0141-1187
www.elsevier.com/locate/apor
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.053
Marine StructuresThis journal aims to provide a medium for presentationand discussion of the latest developments in research,design, fabrication and in-service experience relating tomarine structuresEditor-in-Chief:T. Moan, Norwegian University of Science and Technology, Norway
ISSN: 0951-8339
www.elsevier.com/locate/marstruc
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.901
Structural SafetyAn International Journal on Integrated Risk Assessment forConstructed FacilitiesStructural Safety focuses on buildings, bridges,earth structures, offshore facilities, dams, lifelinesand nuclear structural system. It fosterscommunication about risk and reliability amongtechnical disciplines involved in design andconstruction.
Editor-in-Chief: B. R. Ellingwood, Georgia Institute of Technology, USA
ISSN: 0167-4730
www.elsevier.com/locate/strusafe
Fire Safety JournalOfficial Journal of the International Association for Fire Safety ScienceFire Safety Journal is the leading publication dealingwith all aspects of fire safety engineering. Its scope ispurposefully wide, as it is deemed important toencourage papers from all sources within thismultidisciplinary subject, thus providing a forum for itsfurther development as a distinct engineeringdiscipline.
Editor:J. L. Torero, University of Queensland, Australia
ISSN: 0379-7112
www.elsevier.com/locate/firesaf
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.656
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.867
Reliability Engineering &System SafetyReliability Engineering & System Safety is aninternational journal devoted to the developmentand application of methods for the enhancement ofthe safety and reliability of complex technologicalsystems, like nuclear power plants, chemical plants,hazardous waste facilities, space systems, offshoreand maritime systems, transportation systems,constructed infrastructure and manufacturing plants.
Editor-in-Chief: C. Guedes Soares, Technical University of Lisbon, Portugal
ISSN: 0951-8320
www.elsevier.com/locate/ress
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.770
Did you know you can submit videos
to illustrate your articles?
More information can be found at:
www.elsevier.com/authors
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
9
Acta AstronauticaJournal of the International Academy of AstronauticsActa Astronautica publishes original contributions inall fields of basic, engineering, life and social spacesciences and of space technology related to: thepeaceful scientific exploration of space, itsexploitation for human welfare and progress andthe conception, design, development and operation
of space-borne and Earth-based systems.Editor-in-Chief: R. J.-S. Chern, Taiwan (ROC)
ISSN: 0094-5765
www.elsevier.com/locate/actaastro
Progress in Aerospace SciencesAn International Review JournalProgress in Aerospace Sciences is an internationalreview journal designed to be of broad interestand use to all those concerned with research inaerospace sciences and their applications inresearch establishments, industry and universities.Commissioning Editors:
M. Platzer, Naval Postgraduate School, USAB. E. Richards, University of Glasgow, UK
ISSN: 0376-0421
www.elsevier.com/locate/paerosci
Aerospace engineering
‘It is a great honor for me to serve as editor of
Progress in Aerospace Sciences. It is a very
prestigious journal which covers the very
broad aerospace sciences field. As a
consequence, it provides me with an
opportunity to interact with many more
colleagues than I otherwise would. It is very
satisfying for me to see good review papers
resulting from these interactions which are
quoted in the aerospace literature.’
M. PlatzerEditor-in-Chief, Progress in Aerospace Sciences
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.614
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
3.000
8
Aerospace Science and TechnologyThis journal publishes original papers, review articlesand short communications related to all fields ofaerospace research, fundamental and applied.Editor-in-Chief: J. A. Ekaterinaris, University of Patra, Greece
ISSN: 1270-9638
www.elsevier.com/locate/aescte
Chinese Journal of AeronauticsChinese Journal of Aeronautics (CJA) is a peerreviewed academic magazine in English whichpublishes papers of outstanding scientific andtechnological work bimonthly.Editor-in-Chief:Z. Q. Zhu, Beijing University of Aeronautics and Astronautics,China
ISSN: 1000-9361
www.elsevier.com/locate/cja
Space PolicyAn International JournalSpace Policy is an international, interdisciplinary journalwhich draws on the fields of international relations,economics, history, aerospace studies, security studies,development studies, political science and ethics toprovide discussion and analysis of space activities intheir political, economic, industrial, legal, cultural andsocial contexts.
Editor-in-Chief: F. Brown, UK
ISSN: 0265-9646
www.elsevier.com/locate/spacepol
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.983
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.500
Elsevier gives back to the community
Research4lifeAdvancing the World’s Health HINARI, AGORA, OARE – a commitment to 2015
‘Science and art belong to the whole world and before them, vanish the barriers of nationality.’ Johann Wolfgang von Goethe
Access to current international peer-reviewed research is essential to advance science and medicineworldwide. For developing countries in particular, this need is critical. HINARI, AGORA and OARE, ledby the United Nations, bring together leading publishers to provide free or low cost health,agricultural and environmental research to those who would otherwise not have access.
Through these programmes, more than 2700 institutes can access research articles at no or little costin more than one hundred of the world’s poorest countries. Together, we are making a real differencein people’s lives. All the partners involved in HINARI, AGORA and OARE declared a renewedcommitment to HINARI, AGORA and OARE so that these vital programmes will continue to 2015.
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
1110
Applied AcousticsApplied Acoustics publishes high quality researchpapers providing state-of-the-art coverage ofresearch findings for engineers and scientists involvedin applications of acoustics in the widest sense.Editor-in-Chief: Y. W. Lam, University of Salford, UK
ISSN: 0003-682X
www.elsevier.com/locate/apacoust
Acoustics
‘‘The Journal of Sound and Vibration has
seen a consolidation during 2012 of last year's
enhancement of the international editorial
team and the amalgamation of the editorial
board and advisory team into the new
editorial advisory board.
The level of submissions to the journal
continues to increase and the quality of the
papers published maintains the journal's
pre-eminent position in the fields of vibration
and acoustics’.
Matthew Cartmell, Editor-in-Chief, Journal of Sound and Vibration
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.050
www.elsevier.com/engineering
Journal of Sound and VibrationThe Journal of Sound and Vibration is an independentjournal devoted to the prompt publication of originalpapers, both theoretical and experimental, that providenew information on any aspect of sound or vibration.Editor-in-Chief: M. Cartmell, University of Glasgow, UK
ISSN: 0022-460X
www.elsevier.com/locate/jsvi
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.588
Microelectronics JournalMicroelectronics Journal is an international forum for thedissemination of research into, and applications of,microelectronics.Editor-in-Chief: B. Courtois, CMP, France
ISSN: 0026-2692
www.elsevier.com/locate/mejo
Electrical and electronic engineering
‘Microelectronics Reliability is dedicated to
disseminating the latest research results and
related information on the reliability of
microelectronic devices, circuits and systems.
The journal covers, but is not limited to the
following topics: reliability physics and
analysis, evaluation and prediction, modelling
and simulation, methodologies and assurance.
The approach to encourage practical papers
combining reliability with other important
aspects of microelectronics engineering, such
as design, fabrication, packaging and testing,
leads to an ongoing presentation of novel
topics, techniques, and applications.
The journal strives to publish the peer-
reviewed high quality papers reflecting the
current activities and interests of professionals
from both academic and industrial research
and development establishments. We are
happy to see a steady increase in submission
rate and journal’s impact factor, which
definitely brings Microelectronics Reliability
among the leading journals in the field.’
N. D. Stojadinovic Editor-in-Chief, Microelectronics Reliability
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.919
Microelectronics ReliabilityMicroelectronics Reliability is dedicated todisseminating the latest research results andrelated information on the reliability ofmicroelectronic devices, circuits and systems.Editors-in-Chief: N. D. Stojadinovic, University of Nis, SerbiaM. G. Pecht, University of Maryland, USA
ISSN: 0026-2714
www.elsevier.com/locate/microrel
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.167
12
Journal of ElectrostaticsFundamentals, Applications and HazardsThe journal has the aim of disseminatingknowledge of static electricity in its fundamentalaspects, its useful applications and in its hazardous nature. Editor: M. N. Horenstein, Boston University, USA
ISSN: 0304-3886
www.elsevier.com/locate/elstat
Microelectronic Engineering Microelectronic Engineering is dedicated toadvanced engineering methods for micro- andnanofabrication of electronic devices, circuits andsystems for electronics, electromechanics, andbioelectronics.Editor-in-Chief: E. Gogolides, IMEL, Greece
ISSN: 0167-9317
www.elsevier.com/locate/mee
Microprocessors and MicrosystemsEmbedded Hardware DesignCovers all design and architectural aspects related toembedded systems hardware. Includes differentembedded system hardware platforms ranging fromcustom hardware via reconfigurable systems andapplication specific processors to general purposeembedded processors.
Editor-in-Chief:L. Joswiak, Technische Universiteit, Germany
ISSN: 0141-9331
www.elsevier.com/locate/micpro
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.080
IntegrationThe VLSI JournalIntegration’s aim is to cover every aspect of theVery Large Scale Integration area, with anemphasis on cross-fertilization between variousfields of science, and the design, verification, testand applications of integrated circuits and systems,as well as closely related topics in process anddevice technologies.
Editor-in-Chief:F. V. Fernandez, CSIC/University of Seville, Spain
ISSN: 0167-9260
www.elsevier.com/locate/vlsiMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.646
MA
KE AN IMPACT
2011IMPACT FACTO
RImpact Factor
1.557
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.575
13
Industrial / Manufacturing engineering
‘Material processing with the aim of
manufacturing components has never been
more challenging than today. Globalization of
industrial activities requires stronger and faster
innovation cycles in processing technology with
ever tighter cost and quality pressures, while in
parallel, environmental issues define new
boundary conditions for manufacturing
processes. At the centre of the most application
oriented engineering discipline in physical
sciences, the Journal of Materials Processing
Technology aims to distribute significant new
transferable knowledge to address these
challenges. As the new joint editors-in-chief we
aim to reach this goal with the highest scientific
quality and make JMPT again the central journal
of the manufacturing technology community.’
A. E. Tekkaya and J. M. AllwoodEditors-in-Chief, Journal of Materials Processing Technology
www.elsevier.com/engineering
Computers and Electrical EngineeringAn International Journal Computers and Electrical Engineering provides rapidpublication of topical research into the integration ofcomputer technology and computational techniques withelectrical and electronic systems. Editor: M. Malek, Stevens Institute of Technology, USA
ISSN: 0045-7906
www.elsevier.com/locate/compeleceng
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.837
Journal of Materials Processing Technology The journal covers the processing techniques used inmanufacturing components from metals and othermaterials. Typical articles will contribute significant newtransferable knowledge in the form of processinnovations or insights into the influence of processeson materials.Editors-in-Chief:
A. E. Tekkaya, University of Dortmund, GermanyJ. M. Allwood, University of Cambridge, UK
ISSN: 0924-0136
www.elsevier.com/locate/jmatprotecMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.783
CIRP Annals –Manufacturing TechnologyThis biannual journal contains approximately 140refereed technical and keynote papers. Subjectareas covered include: Assembly, Cutting, Design,Electro-Physical and Chemical Processes, Forming,Abrasive processes, Surfaces, Machines, ProductionSystems and Organizations, Precision Engineeringand Metrology, Life-Cycle Engineering,
Microsystems Technology (MST),Nanotechnology.
Editor: CIRP, The International Academy forProduction EngineeringISSN: 0007-8506
www.elsevier.com/locate/cirp
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.708LIBERAL COPYRIGHT POLICYElsevier’s copyright statements allow for posting on pre-and post-print servers, as well as personal homepagesand institutional repositories, provided a link to theofficial version on ScienceDirect is also indicated.
Please visit: www.elsevier.com/authorsrightsfor a full overview of Elsevier’s copyright policy.
15
Applied ErgonomicsHuman Factors in Technology and SocietyApplied Ergonomics is aimed at ergonomists and allthose interested in applying ergonomics/human factorsin the design, planning and management of technicaland social systems at work or leisure.Co-Editors-in-Chief: P. Carayon, University of Wisconsin at Madison, USA
K. C. Parsons, Loughborough University, UKJ. R. Wilson, University of Nottingham, UK
ISSN: 0003-6870
www.elsevier.com/locate/apergo
Design StudiesThe International Journal for Design Research in Engineering,Architecture, Products and SystemsDesign Studies is the only journal to approach theunderstanding of design from comparisons acrossall domains of application, including engineeringand product design, architectural design andplanning, computer artefacts and systems design.
Editor-in-Chief: N. Cross, The Open University, UK
ISSN: 0142-694X
www.elsevier.com/locate/destud
Advanced Engineering InformaticsThe science of supporting knowledge-intensive activitiesThis journal publishes articles that report on progress inthe engineering discipline of applying computer science,have engineering relevance, contain novel research thatdemonstrates the science supporting knowledge-intensiveengineering tasks and validate the generality, power and
scalability of new methods through vigorousevaluation. Editors:W. J. O’Brien, University of Texas at Austin, USAT. Tomiyama, Delft University of Technology, The Netherlands
ISSN: 1474-0346
www.elsevier.com/locate/aei
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.428
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.489
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.969
14
CIRP Journal ofManufacturing Science and TechnologyThe CIRP Journal of Manufacturing Science andTechnology publishes fundamental papers onmanufacturing processes, production equipment andautomation, product design, manufacturing systemsand production organisations up to the level of theproduction networks, including all the relatedtechnical, human and economic factors. Editor: L. Monostori, Hungarian Academy of Sciences, Hungary
ISSN: 1755-5817
www.elsevier.com/locate/cirpj
Journal of Manufacturing ProcessesAn Official Journal of the Society ofManufacturing Engineers (SME) This journal aims to exchange current and futuredirections of manufacturing processes research,development and implementation, and to publisharchival scholarly literature with a view to advancingstate-of-the-art manufacturing processes andencouraging innovation for developing new andefficient processes. Editor: S. G. Kapoor, University of Illinois, USA
ISSN: 1526-6125
www.elsevier.com/locate/manpro
Journal of Manufacturing SystemsAn Official Journal of the Society ofManufacturing Engineers (SME) The Journal of Manufacturing Systems (JMSY)publishes state-of-the-art fundamental and appliedresearch in manufacturing at the systems level.
Editor: S. J. Hu, University of Michigan, USA
ISSN: 0278-6125
www.elsevier.com/locate/jmansysMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.639
International Journal ofIndustrial ErgonomicsThe journal publishes original contributions that addto our understanding of the role of humans in today’ssystems and the interactions thereof with varioussystem components.Editor-in-Chief: A. K. Gramopadhye, Clemson University, USA
ISSN: 0169-8141
www.elsevier.com/locate/ergon
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.260
Mechanism and Machine TheoryAn Official IFToMM research journalFocuses on IFToMM’s main research/developmentareas, including: design theory and methodology;haptics and human-machine-interfaces; robotics,mechatronics and micro-machines; mechanisms,
mechanical transmissions and machines; kinematics,dynamics and control of mechanical systems;
applications to bioengineering and molecularchemistry.Editor-in-Chief: A. Kecskeméthy, Universität Duisburg-Essen, Germany
ISSN: 0094-114X
www.elsevier.com/locate/mechmtM
A
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.540
Robotics and Computer-Integrated ManufacturingAn International Journal of Manufacturing,Product and Process DevelopmentIncorporating Computer IntegratedManufacturing Systems The emphasis of this journal is on disseminating theapplication of research to the development of new orimproved industrially-relevant manufacturing
technologies, equipment, and strategies.Editor-in-Chief: A. Sharon, Boston University, USA
ISSN: 0736-5845
www.elsevier.com/locate/rcim
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.173
International Journal ofMachine Tools & ManufactureThe International Journal of Machine Tools &Manufacture is concerned primarily with the scienceand technology of processes and machines applied tothe manufacture of engineering components, mainlyin metals, but also in composites and ceramics.
Editor-in-Chief: T. A. Dean, University of Birmingham, UK
ISSN: 0890-6955
www.elsevier.com/locate/ijmactoolMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.169
www.elsevier.com/engineering
About the Elsevier WebShopElsevier’s WebShop offers a range of products and services at all stages of the publishing process tosupport and professionalize scientific research and its presentation. The WebShop providesanything from language editing services for your manuscripts up to reprinting services includingpersonal copies of Elsevier published articles and journal issues. To learn more about all ourofferings take a tour through the site: http://webshop.elsevier.com.
1716
Computers in IndustryAn International, Application OrientedResearch JournalPublishes papers that show new trends in and optionsfor the use of information and communicationtechnology in industry; link or integrate differenttechnology fields in the broad area of computer-applications for industry; link or integrate differentapplication areas of ICT in industry.
Editors-in-Chief: H. Wortmann, University of Groningen, The NetherlandsH. S. Jagdev, National University of Ireland, Ireland
ISSN: 0166-3615
www.elsevier.com/locate/compind
Precision EngineeringJournal of the International Societies forPrecision Engineering and NanotechnologyPrecision Engineering is devoted to the multidisciplinarystudy and practice of high accuracy engineering,metrology, and manufacturing.Editors-in-Chief: Y. Takeuchi, Osaka University, JapanJ. C. Ziegert, Clemson University, USA
R. K. Leach, National Physical Laboratory, UK
ISSN: 0141-6359
www.elsevier.com/locate/precisionMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.167
MA
KE AN IMPACT
2011IMPACT FACTO
RImpact Factor
1.529
Current Opinion in Chemical EngineeringThis new journal is devoted to bringing forth short and focused review articles written by experts on currentadvances in different areas of chemical engineering. Only invited review articles will be published.
Themed sections:Each review will focus on particular aspects of one of the followingthemed sections of chemical engineering:
1. Nanotechnology
2. Energy and environmental engineering
3. Biotechnology and bioprocess engineering
4. Biological engineering (covering tissue engineering, regenerative medicine, drug delivery)
5. Separation engineering (covering membrane technologies,adsorbents, desalination, distillation, etc)
6. Materials engineering (covering biomaterials, inorganicespecially ceramic materials, nanostructured materials)
7. Process systems engineering
8. Reaction engineering and catalysis
ISSN: 2211-3398
Editor-in-Chief: K. K. Sirkar, New Jersey Institute of Technology, Newark, USA
NEWJOURNAL
1918
International Journal of Solids and StructuresThe International Journal of Solids and Structures has asits objective the publication and dissemination of originalresearch in mechanics of solids and structures as a field ofapplied science and engineering.
Editors: D. A. Hills, University of Oxford, UKS. Kyriakides, University of Texas at Austin, USA
ISSN: 0020-7683
www.elsevier.com/locate/ijsolstr
Solid mechanics
Engineering Fracture Mechanics (EFM) is in
its 44th year of publishing original research of
broad interest and use to researchers and
practitioners of fracture mechanics in
academic, industrial, and government
organizations. Contributions address the
fracture and fatigue behavior of novel
structural arrangements of conventional
material systems, and newly emerging systems
such as electronic, biomechanical, and energy
production. Continuing developments in
micro- and nano-scale observation and
measurement, and ever increasing
computational power help EFM authors
synthesize experimental and theoretical-
computational studies to produce results with
direct engineering significance. EFM is
experiencing a growing number of article
downloads and volume of contributions for
both regular and special issues, while
maintaining a rigorous review process and
high quality of its publications.
Karl-Heinz Schwalbe and Anthony IngraffeaEditors, Engineering Fracture Mechanics
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.857
Engineering Fracture MechanicsPublished in affiliation with the EuropeanStructural Integrity SocietyEngineering Fracture Mechanics is a journal designed tobe of broad interest and use to both researchers andpractitioners of fracture mechanics in academic,industrial and government organizations.
Co-Editors: A. R. Ingraffea, Cornell University, USAK-H. Schwalbe, Vögelsen/Lüneburg, Germany
ISSN: 0013-7944
www.elsevier.com/locate/engfracmech
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.353
International Journal of Engineering ScienceIncorporating Letters in Applied and Engineering SciencesThe International Journal of Engineering Science isdevoted to a wide range of subfields in the engineeringsciences, with a core interest lying in issues concerningmaterial modeling and response.
Editors-in-Chief: M. Kachanov, Tufts University, USAK. R. Rajagopal, Texas A and M University, USA
ISSN: 0020-7225
www.elsevier.com/locate/ijengsci
Mechanics of MaterialsAn International JournalMechanics of Materials is a forum for originalscientific research on the flow, fracture, and generalconstitutive behavior of geophysical, geotechnicaland technological materials, with balancedcoverage of advanced technological and naturalmaterials, and theoretical, experimental, and fieldinvestigations.
Editor-in-Chief: S. Nemat-Nasser, University of California, USA
ISSN: 0167-6636
www.elsevier.com/locate/mechmat
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.769
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.210
International Journal ofMechanical SciencesThe International Journal of Mechanical Sciences is aninternational forum for the publication anddissemination of original work which contributes tothe understanding of the main disciplinesunderpinning the mechanical and civil engineeringsciences.
Editor-in-Chief:S. R. Reid, University of Aberdeen, UK
ISSN: 0020-7403
www.elsevier.com/locate/ijmecsciMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.231
Mechanics Research CommunicationsMechanics Research Communications publishes as rapidlyas possible manuscripts of high standards but restrictedlength.Editor-in-Chief: A. D. Rosato, New Jersey Institute of Technology, USA
ISSN: 0093-6413
www.elsevier.com/locate/mechrescom
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.273
European Journal ofMechanics A/SolidsAn Official Medium of Publication forEUROMECH, the European Mechanics SocietyThe European Journal of Mechanics A/Solidspublishes articles in all areas of Solid Mechanicsfrom the physical and mathematical basis tomaterials engineering, technological applicationsand methods of modern computational mechanics,
both pure and applied research.Editor-in-Chief: V. Tvergaard, Technical University of Denmark,Lyngby, Denmark
ISSN: 0997-7538
www.elsevier.com/locate/ejmsol
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.484
International Journal ofPressure Vessels and PipingDesign, Manufacture and Operation ofPressurised Components; StructuralIntegrity; Plant Life Management Pressure vessel engineering technology is ofimportance in many branches of industry. This journalpublishes the latest research results and relatedinformation on all its associated aspects, with
particular emphasis on the structural integrityassessment, maintenance and life extension ofpressurised process engineering plants.Editor-in-Chief: R. A. Ainsworth, British Energy Generation Ltd, UK
ISSN: 0308-0161
www.elsevier.com/locate/ijpvp
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.989
www.elsevier.com/engineering
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
2120
Tribology InternationalTribology International provides up-to-dateinformation on the science, practice and technologyof lubrication, wear prevention and friction control.Editor-in-Chief: P. Cann, Imperial College, UK
ISSN: 0301-679X
www.elsevier.com/locate/triboint
International Journal of FatiguePublished in Affiliation with the EuropeanStructural Integrity SocietyInternational Journal of Fatigue is dedicated entirelyto the full range of scientific and technological issuesassociated with fatigue. Co-Editors: M. N. James, University of Plymouth, UK
D. McDowell, Georgia Institute of Technology, USA
ISSN: 0142-1123
www.elsevier.com/locate/ijfatigueMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.546
Engineering Failure AnalysisPublished in affiliation with the European Structural Integrity Society
Publishes original, high quality research papers,communications, and occasional review articlesdescribing the analysis of engineering failures andrelated studies.
Editor-in-Chief: R. Clegg, Central Queensland University, Australia
ISSN: 1350-6307
www.elsevier.com/locate/engfailanal
Theoretical and AppliedFracture MechanicsMechanics and Physics of Fracture The Mechanics and Physics of Fracture part encouragespublication of original research on Material damageleading to crack growth and/or fatigue. The FractureMechanics Technology section emphasizes materialcharacterization techniques and translation of specimendata to design.
Editor-in-Chief: G. C. Sih, East China University of Science and Technology,China, and Lehigh University, USA
ISSN: 0167-8442
www.elsevier.com/locate/tafmecM
A
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.990M
A
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.086
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.553
WearAn International Journal on the Science and Technology of Friction, Lubrication and WearThis international journal is dedicated to the rapidpublication of high quality papers on the importantsubjects of wear and friction, together with papers onclosely related aspects of lubrication, contactphenomena or surface characterization.
Editor-in-Chief: I. M. Hutchings, University of Cambridge, UK
ISSN: 0043-1648
www.elsevier.com/locate/wear
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.872
Journal of the Mechanics and Physics of SolidsThe main purpose of this journal is to foster scientificunderstanding of the processes of deformation andmechanical failure of all solid materials, bothtechnological and natural, and the connections betweenthese processes and their underlying physicalmechanisms.
Editors: K. Bhattacharya, California Institute of Technology, USA
H. Gao, Brown University, USA
ISSN: 0022-5096
www.elsevier.com/locate/jmps
MA
KE AN IMPACT
2011IMPACT FACTO
RImpact Factor
2.806
www.wearofmaterialsconference.com
• a key conference focusing on both the fundamental and applied aspects of wear and friction of materials at the macro-, micro-, and nano-scale
• provides a unique international forum for researchers and practicing engineers fromdifferent disciplines to interact and exchange their latest results
• addresses the understanding of tribological phenomena – particularly the progress in recent decades, and a special session will concentrate on modeling of wear
For more information or to register, go to the website:
2322
Probabilistic Engineering MechanicsThis journal provides a forum for scholarly work dealingprimarily with probabilistic and statistical approaches tocontemporary solid/structural and fluid mechanics problemsencountered in diverse technical disciplines such asaerospace, civil, marine, mechanical, and nuclearengineering.Editor:
P. D. Spanos, Rice University, USA
ISSN: 0266-8920
www.elsevier.com/locate/probengmechMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.245
International Journal ofAdhesion and AdhesivesThe International Journal of Adhesion and Adhesives drawstogether the many aspects of the science and technology ofadhesive materials, from fundamental research anddevelopment work to industrial applications. Editors-in-Chief:R. D. Adams, University of Bristol, UKJ. Comyn, Loughborough University, UK
ISSN: 0143-7496
www.elsevier.com/locate/ijadhadh
International Journal of Impact EngineeringThe International Journal of Impact Engineering existsfor the publication of original research work concernedwith the response of structures, bodies and materials todynamic loads arising from exposure to blast, collisionor other impact events.Editor-in-Chief:M. Langseth, Norwegian University of Science and Technology,
Norway
ISSN: 0734-743X
www.elsevier.com/locate/ijimpeng
Journal of the Mechanical Behavior ofBiomedical MaterialsThe journal is concerned with the mechanicaldeformation, damage and failure under applied forces, ofbiological material (at the tissue, cellular and molecularlevels) and of biomaterials. It is an engineering journalspecialising in the theoretical and the experimental
mechanical properties of biomedical materials, coveringboth tissues and biomaterials, as well as practical
applications of materials in medical devices.Editor-in-Chief: D. Taylor, Trinity College, Ireland
ISSN: 1751-6161
www.elsevier.com/locate/jmbbm
International Journal of PlasticityThe purpose of the journal is to report originalresearch on all aspects of plastic deformation,damage and fracture behaviour of isotropic as wellas anisotropic solids, including the thermodynamicsof plasticity and fracture, continuum theory, andmacroscopic as well as microscopic phenomena.Editor-in-Chief:
A. S. Khan, University of Maryland-Baltimore County, USA
ISSN: 0749-6419
www.elsevier.com/locate/ijplasMA
KE AN IMPACT
2011IMPACT FACTO
RImpact Factor
4.603
NDT & E InternationalIndependent Nondestructive Testing and EvaluationNDT&E International publishes peer-reviewed results oforiginal research and development in all categories ofthe fields of nondestructive testing and evaluationincluding ultrasonics, electromagnetics, radiography,optical and thermal methods.Editor-in-Chief:
D. E. Chimenti, Iowa State University, USA
ISSN: 0963-8695
www.elsevier.com/locate/ndteintMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.477
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.701
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.170
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.814
Physical MesomechanicsPhysical Mesomechanics publishes papers onstructural, physical, mechanical properties ofmaterials, computer methods of physicalmesomechanics of heterogeneous media, non-destructive testing methods, as well as themesomechanics of destruction, physicalmesomechanics of destruction, physicalmesomechanics of materials and its applications totectonics, mesomechanics of functional materials andthe materials for use in electronics.Editor-in-Chief: W. Panin, Institute of Strength Physics and Materials Science,Russian Federation
ISSN: 1029-9599
www.elsevier.com/locate/physme
Acta Mechanica Solida SinicaActa Mechanica Solida Sinica aims to become the bestjournal of solid mechanics in China and the known onein the world in the field of mechanics, by building upan international exchange platform for the ecologicalresearch; providing original, perspective and evenbreakthrough theories and methods for the research onsolid mechanics in China and in the world; serving thesustainable development worldwide.
Editor-in-Chief: Q. S. Zheng, Tsinghua University, China
ISSN: 0894-9166
www.elsevier.com/locate/camssMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.766
Journal of AppliedMathematics and MechanicsThis journal is a cover to cover translation of theRussian journal Prikladnaya Matematika i Mekhanika,published by the Russian Academy of Sciences andreflecting all the major achievements of the RussianSchool of Mechanics. Editor-in-Chief: F. L. Chernous'ko
ISSN: 0021-8928
www.elsevier.com/locate/jamm
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.323
www.elsevier.com/engineering
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
Open Access ChoicesWe understand that some researchers want to make theirresearch easily available and downloadable beyond theacademic community. To meet this need, we offerresearchers a number of open access publishing choices.
www.elsevier.com/openaccess
24 25
Thermal and fluid science
‘Advances in the understanding of multiphase
flows continue to have a major impact in a wide
variety of technological and scientific settings
ranging from microfluidics to the oil industry and
from energy production to climate change.
The complex nature of these flows makes their
modeling and prediction challenging tasks, for
which a deeper understanding of the physics must
proceed hand in hand with better theoretical,
computational and experimental resources. Since
its establishment in 1973, the International
Journal of Multiphase Flow has been one of the
most influential publications at the intersection
between the scientific and engineering
communities in this broad area. The journal
publishes analytical, numerical and experimental
papers addressing all aspects of momentum,
energy and mass exchange phenomena among
different phases such as occur in bubbly liquids,
disperse particle flows, gas-liquid and liquid-liquid
flows, flows in porous media, cavitation, boiling,
granular media and many others. The impact factor
of IJMF has increased year-on-year since 2007, and
today, standing at 2.230, it makes it one of the
leading journals that deal – partially or totally –
with fluid flow.
Andrea ProsperettiEditor-in-Chief, International Journal of Multiphase Flow
www.elsevier.com/engineering
International Journal ofMultiphase FlowThe International Journal of Multiphase Flow publishestheoretical and experimental investigations ofmultiphase flow which are of relevance and permanentinterest.Editor-in-Chief:A. Prosperetti, The Johns Hopkins University, USA
ISSN: 0301-9322
www.elsevier.com/locate/ijmulflow
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.230
International Journal of Thermal SciencesThe International Journal of Thermal Sciences is ajournal devoted to the publication of fundamentalstudies on the physics of transfer processes in general,with emphasis on thermal aspects and also appliedresearch on various processes, energy systems and theenvironment.Editors-in-Chief:
Y. Bayazitoglu, Rice University, USAD. Gobin, Laboratoire F.A.S.T, FranceU. Gross, Technische Universität Bergakademie Freiberg,Germany
ISSN: 1290-0729
www.elsevier.com/locate/ijts
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.142
Article-Based PublishingWe have introduced article-based publishing for journals, making final and citable articles availableonline faster, and improving their findability. Articles will be published as soon as possible withoutwaiting for an issue to be complied; they will appear in an “Issue in Progress”.
Benefits:• Final and citable articles are published without needing to wait until a journal issue is complete
• Publication speed is improved by an average of 7 weeks
• Faster citations; researchers can use the complete citations earlier
• Publication process reflects industry shift from print to electronic publishing
Find out more: www.elsevier.com/abp
CiteAlert• An automated service to notify authors when their articles are cited in an Elsevier journal• Keeping authors informed about the latest research in their field
Keep up to date: www.elsevier.com/citealert
About Elsevier ConferencesElsevier has been running conferences internationally for over 20 years in conjunction with anumber of worldwide committees and societies. Our conferences provide delegates with access tothe most up-to-date and authoritative knowledge in their subject area and an exceptionalnetworking opportunity. To get the latest information about conferences visit the Elsevierconference website at www.elsevier.com/conferences
2726
Computers & FluidsAn International JournalComputers & Fluids is multidisciplinary. The term ‘fluid’is interpreted in the broadest sense. Hydro- andaerodynamics, high-speed and physical gas dynamics,turbulence and flow stability, multiphase flow,rheology, tribology and fluid-structure interaction areall of interest.Editor-in-Chief:
M. Deville, Swiss Federal Institute of Technology, Switzerland
ISSN: 0045-7930
www.elsevier.com/locate/compfluid
Journal of Non-NewtonianFluid MechanicsThe journal will appeal to people working onfundamental developments in the rheological sciencesand applications on both the macroscopic andmicroscopic scale.Editor:R. Keunings, Université Catholique de Louvain, Belgium
ISSN: 0377-0257
www.elsevier.com/locate/jnnfm
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.810
European Journal of Mechanics B/FluidsAn Official Medium of Publication for EUROMECH,the European Mechanics SocietyThe European Journal of Mechanics B/Fluids publishespapers in all fields of fluid mechanics. Althoughinvestigations in well established areas are within thescope of the journal, recent developments andinnovative ideas are particularly welcome.
Editors-in-Chief: F. Dias, Ecole Normale Supérieure de Cachan, FranceG. J. F. van Heijst, Eindhoven University of Technology, The Netherlands
ISSN: 0997-7546
www.elsevier.com/locate/ejmflu
Flow Measurement and Instrumentation Flow Measurement and Instrumentation is dedicated todisseminating the latest research results on all aspectsof flow measurement, in both closed conduits and openchannels. Editor-in-Chief: J. Delsing, Luleå University of Technology, Sweden
ISSN: 0955-5986
www.elsevier.com/locate/flowmeasinst
Experimental Thermal and Fluid ScienceInternational Journal of Experimental Heat Transfer, Thermodynamics, and Fluid MechanicsExperimental Thermal and Fluid Science provides a forumfor research emphasizing experimental work that enhancesbasic understanding of heat transfer, thermodynamics andfluid mechanics, and their applications.
Editors-in-Chief: I. Kennedy, University of California, USAG. P. Celata, ENEA-Institute of Thermal-Fluid Dynamics, Italy
ISSN: 0894-1777
www.elsevier.com/locate/etfs
Journal of Fluids and StructuresThe Journal of Fluids and Structures publishes original full-length papers, review articles and briefcommunications on any aspect of fluid-structureinteraction and on the dynamics of systems related tosuch interactions: analytical, experimental, orcomputational.Editor:
M. P. Païdoussis, McGill University, Canada
ISSN: 0889-9746
www.elsevier.com/locate/jfsMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.328
International Journal ofRefrigeration – RevueInternationale Du FroidPublished for the International Institute ofRefrigerationThe International Journal of Refrigeration is essentialreading for all those wishing to keep abreast of researchand industrial news in refrigeration, air conditioning andassociated fields.Editor-in-Chief: H. Auracher, Technische Universität Berlin, Germany
ISSN: 0140-7007
www.elsevier.com/locate/ijrefrig
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.817
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.567
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.800
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.675
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.414
International Communicationsin Heat and Mass Transfer International Communications in Heat and MassTransfer serves as a world forum for the rapiddissemination of new ideas, new measurement techniques,preliminary findings of ongoing investigations, discussions,and criticisms in the field of heat and mass transfer.
Editor-in-Chief: W. J. Minkowycz, University of Illinois, USA
ISSN: 0735-1933
www.elsevier.com/locate/ichmt
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.892
International Journal of Heat and Mass Transfer This journal provides a central vehicle for the exchangeof basic ideas in heat and mass transfer betweenresearch workers and engineers throughout the world.Editor-in-Chief: W. J. Minkowycz, University of Illinois, USA
ISSN: 0017-9310
www.elsevier.com/locate/ijhmt
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.407
www.elsevier.com/engineering
Applied Thermal EngineeringDesign, Processes, Equipment, EconomicsApplied Thermal Engineering publishes original, high-quality research papers and ancillary features,spanning activities ranging from fundamentalresearch to trouble-shooting in existing plant andequipment.Editor-in-Chief: D. A. Reay, David Reay & Associates, UK
ISSN: 1359-4311
www.elsevier.com/locate/apthermeng
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.064
International Journal of Heat and Fluid FlowAdvances in the understanding of heat transfer andfluid flow continue to be crucial in achieving improvedperformance and efficiency in a broad range ofmechanical and process plants. Editors-in-Chief: T. B. Gatski, Old Dominion University, USAS. Jakirlic, Technische Universität Darmstadt, Germany
ISSN: 0142-727X
www.elsevier.com/locate/ijhff
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.927
You can now add Matlab fig files when you submit your articles for this journal
www.elsevier.com/matlab
2928
AutomaticaA Journal of IFAC, the International Federation of Automatic ControlAutomatica publishes papers on original theoretical andexperimental research and development in the control ofsystems, involving all facets of automatic control theory andits applications.
Editor-in-Chief: T. Bas5ar, University of Illinois, USA
ISSN: 0005-1098
www.elsevier.com/locate/automatica
Control Engineering PracticeA Journal of IFAC, the International Federation of Automatic ControlControl Engineering Practice meets the needs ofindustrial practitioners and industrially relatedacademics and researchers by publishing papers whichillustrate the direct application of control theory and itssupporting tools in all possible areas of automation. Editor-in-Chief:
A. Kugi, Vienna University of Technology, Austria
ISSN: 0967-0661
www.elsevier.com/locate/conengprac
Control engineering and signal processing
‘Automatica is a leading archival publication in the field of
automatic control, in its 46th year of publication and
consistently enjoying a high Impact Factor. It maintains a balance
between theory and applications, attracting and publishing
top-quality papers reporting cutting-edge research results by
authors from across the globe. It features articles in distinct
categories, including regular, brief, survey papers, technical
communiqués (as rapid publications), correspondence items, and
reviews on published books.
The field of automatic control is thriving, not only within itself
but also in terms of its impact on several other fields such as
communications, computers, biology, and economics, to list just
a few. Automatica is at the forefront of publishing high-quality
articles on these developments as well, and attracts readership
also from other fields that are becoming heavy users of control
theory, methodology and tools.’
T. Bas5ar, Editor-in-Chief, Automatica
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.829
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.481
www.elsevier.com/engineering
IFAC-PapersOnLineThe International Federation of AutomaticControl’s free conference papers archive:www.ifac-papersonline.net
28
Journal of CatalysisISSN: 0021-9517
www.elsevier.com/locate/jcat
Chemical Engineering ScienceISSN: 0009-2509
www.elsevier.com/locate/ces
Applied Catalysis B: EnvironmentalISSN: 0926-3373
www.elsevier.com/locate/apcatb
Chemical Engineering Research and DesignPublication of the Institute of Chemical Engineers (IChemE)
ISSN: 0263-8762
www.elsevier.com/locate/cherd
Chemical Engineering JournalISSN: 1385-8947
www.elsevier.com/locate/cej
Journal of Membrane ScienceISSN: 0376-7388
www.elsevier.com/locate/memsci
www.elsevier.com/chemicalengineering
Chemical engineering
MA
KE AN IMPACT
2011IMPACT FACTO
RImpact Factor
6.002
MA
KE AN IMPACT
2011IMPACT FACTOR
Impact Factor
3.461
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
2.431
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
5.625
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
3.850
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.968
Mechanical Systems and Signal ProcessingAn International JournalAffiliated to the Society for Experimental MechanicsOngoing developments in mechanical, aeronauticaland civil engineering and major changes broughtabout by advances in instrumentation and associated
computing power, necessitate the application andintegration of techniques involving systems
theory, signal processing, control theory andstatistics. This journal provides a forum for thediscussion of research findings related toapplications utilizing these disciplines, whilemaintaining a healthy balance between
fundamental and experimental topics.Editor:
S. G. Braun, Technion – Israel Institute of Technology, Israel
ISSN: 0888-3270
www.elsevier.com/locate/ymssp
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.824
Other Chemical Engineering Journals
Advanced Powder Technology
Applied Catalysis A: General
Biochemical Engineering Journal
Catalysis Communications
Catalysis Today
Chemical Engineering and Processing
Chinese Journal of Catalysis
Chinese Journal of Chemical Engineering
Computers & Chemical Engineering
Current Opinion in Chemical Engineering
Desalination
Dyes and Pigments
Education for Chemical Engineers
Food and Bioproducts Processing
Hydrometallurgy
International Journal of Mineral Processing
Journal of Bionics Engineering
Journal of Chemical Health and Safety
Journal of Fuel Chemistry and Techology
Journal of Industrial and Engineering Chemistry
Journal of Loss Prevention in The Process Industries
Journal of Molecular Catalysis A: Chemical
Journal of Molecular Catalysis B: Enzymatic
Journal Of Natural Gas Chemistry
Journal of Supercritical Fluids
Journal of the Taiwan Institute of Chemical Engineers
Microporous and Mesoporous Materials
Minerals Engineering
Particuology
Powder Technology
Process Safety and Environmental Protection
Separation and Purification Technology
3130
Measurement Journal of the International MeasurementConfederation (IMEKO)Covers all aspects of the research, development andapplications of the science and technology ofmeasurement and instrumentation.Editor-in-Chief: K. T. V. Grattan, City University, UK
ISSN: 0263-2241
www.elsevier.com/locate/measurement
Biomedical Signal Processing and ControlLaunched in 2006, Biomedical Signal Processing and Control aims to provide a cross-disciplinary international forum for theinterchange of information on research in themeasurement and analysis of signals and imagesin clinical medicine and the biological sciences.Editor-in-Chief:
R. Allen, University of Southampton, UK
ISSN: 1746-8094
www.elsevier.com/locate/bspc
Signal Processing A publication of the European Association for Signal Processing (EURASIP)Signal Processing incorporates all aspects of thetheory and practice of signal processing (analogueand digital). It features original research work,tutorial and review articles, and accounts ofpractical developments.Editor-in-Chief:
B. Ottersten, Royal Institute of Technology, Sweden
ISSN: 0165-1684
www.elsevier.com/locate/sigpro
Digital Signal ProcessingDigital Signal Processing illuminates and exploresthe path of creativity in the field of signalprocessing. The journal publishes a diverse contentof original research articles and reviews, coveringnew technologies, significant new programs, andbreakthroughs in the field.Editor-in-Chief: E. E. Kuruoglu, CNR, Pisa, Italy
ISSN: 1051-2004
www.elsevier.com/locate/dsp
Speech Communication A publication of the European Association forSignal Processing (EURASIP) and of theInternational Speech Communication Association(ISCA)Speech Communication is an interdisciplinary journalwhose primary objective is to fulfill the need for therapid dissemination and thorough discussion of basicand applied research results.Editor-in-Chief:
M. G. J. Swerts, University of Tilburg, The Netherlands
ISSN: 0167-6393
www.elsevier.com/locate/specomMA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.267
Signal Processing: Image CommunicationSignal Processing: Image Communication is aninternational journal for the development of thetheory and practice of image communication.Editor-in-Chief: F. Dufaux, CNRS LTCI Télécom, Paris, France
ISSN: 0923-5965
www.elsevier.com/locate/image
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.415
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.435
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.503
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
0.836
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.000
Annual Reviews in ControlA Journal of IFAC, the International Federationof Automatic ControlAnnual Reviews in Control covers the whole field ofcontrol and its applications. Most reviews areselected from the best reviews presented atmeetings of IFAC, re-written and broadened wherenecessary.Editor:
J. Gertler, George Mason University, USA
ISSN: 1367-5788
www.elsevier.com/locate/arcontrol
Engineering Applications ofArtificial IntelligenceThe International Journal of IntelligentReal-Time AutomationA Journal of IFAC, the International Federationof Automatic ControlThis journal provides an international forum for rapidpublication of work describing the practical
application of AI methods in all branches ofengineering.
Editor-in-Chief: B. Grabot, Ecole Nationale d’Ingénieurs de Tarbes, France
ISSN: 0952-1976
www.elsevier.com/locate/engappai
MechatronicsThe Science of Intelligent MachinesA Journal of IFAC, the International Federation ofAutomatic ControlThe purpose of this journal is to provide rapidpublication of topical papers featuring practicaldevelopments in mechatronics, the synergisticcombination of precision mechanical engineering,electronic control and systems thinking in the design
of products and manufacturing processes.Editor-in-Chief: M. Steinbuch, Eindhoven University of Technology, The Netherlands
ISSN: 0957-4158
www.elsevier.com/locate/mechatronics
Journal of Process ControlA Journal of IFAC, the International Federationof Automatic ControlThis international journal covers the application ofcontrol theory, operations research, computer scienceand engineering principles to the solution of processcontrol problems. Editor: W. Marquardt, Aachen University, Germany
ISSN: 0959-1524
www.elsevier.com/locate/jprocont
MA
KE AN IMPACT
2011IMPACT FACTO
RImpact Factor
1.319
Systems & Control LettersSystems & Control Letters has become one of the leadingjournals in the field. Its aim is to allow rapid disseminationof contributions in the area of systems and control, in theform of concise papers. All aspects of the field arecovered.Editors-in-Chief: A. C. Antoulas, Rice University, USAR. Sepulchre, Université de Liège, Belgium
ISSN: 0167-6911
www.elsevier.com/locate/sysconle
ISA TransactionsTargeted for leading-edge industrial practitioners andapplied researchers, ISA Transactions aims to be therespected journal of advances in the science andengineering of process measurement and automation.Editor-in-Chief: A. B. Rad, Simon Fraser University, Cananda
ISSN: 0019-0578
www.elsevier.com/locate/isatrans
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.222
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.109
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.696M
A
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.665
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.255
www.elsevier.com/engineering
IFAC-PapersOnLineThe International Federation of Automatic Control’s freeconference papers archive: www.ifac-papersonline.net
32
Sensors and ActuatorsA: PhysicalSensors and Actuators A: Physical brings togethermultidisciplinary interests in one journal entirelydevoted to disseminating information on all aspectsof research and development of solid-state devices fortransducing physical signals.Editor: P. J. French, Delft University of Technology, The Netherlands
ISSN: 0924-4247
www.elsevier.com/locate/sna
Sensors and Actuators B: ChemicalThis interdisciplinary journal covers research anddevelopment in the field of chemical sensors, actuatorsand microsystems.Editors: Z. Brzozka, PolandP. J. French, The NetherlandsR. E. Gyurcsányi, Hungary
R. Moos, GermanyR. Narayanaswamy, UKG. Rivas, ArgentinaY. Shimizu, JapanM. Tokeshi, JapanU. Weimar, Germany
ISSN: 0925-4005
www.elsevier.com/locate/snb
Computers and Electronics in AgricultureThis journal provides international coverage ofadvances in the application of computer hardware,software and electronic instrumentation and controlsystems to agriculture, forestry and related industries.Editors-in-Chief: N. H. Hancock, University of Southern Queensland, AustraliaJ. K. Schueller, University of Florida, USA
G. van Staten, Wageningen University, The NetherlandsQ. Zhang, Washington State University, USA
ISSN: 0168-1699
www.elsevier.com/locate/compag
Computer Methods andPrograms in BiomedicineComputer Methods and Programs in Biomedicinecovers computing methodology and software systemsderived from computing science for implementation inall aspects of biomedical research and medicalpractice.Editor: T. Groth, Uppsala University Hospital, Sweden
ISSN: 0169-2607
www.elsevier.com/locate/cmpb
MA
KE AN IMPACT
2011IMPACT FACTO
RImpact Factor
1.802
Nonlinear Analysis: Hybrid Systems Nonlinear Analysis: Hybrid Systems welcomes allimportant research and expository papers in anydiscipline. Papers that are principally concerned withthe theory of hybrid systems should contain significantresults indicating relevant applications.Editor-in-Chief:J. Zaytoon, University of Reims, France
ISSN: 1751-570X
www.elsevier.com/locate/na
Nonlinear Analysis: Theory,Methods & ApplicationsThis journal has applications in main academic subjectsas well as in industry and government. The journalpublishes important research and expository papers andpreliminary communications devoted to solvingnonlinear problems in all areas of theory, methods andapplications of nonlinear analysis.
Editors:S. Carl, Martin-Luther-Universität Halle-Wittenburg, Germany
E. L. Mitidieri, Università degli Studi di Trieste, Italy
ISSN: 0362-546X
www.elsevier.com/locate/na
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.516M
A
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
3.898
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.846
PageActa Astronautica 8Acta Mechanica Solida Sinica 23Advanced Engineering Informatics 15 Advances in Engineering Software 2Advances in Space Research 10Aerospace Science and Technology 8Annual Reviews in Control 30Applied Acoustics 10Applied Catalysis B: Environmental 28Applied Ergonomics 15Applied Ocean Research 7Applied Thermal Engineering 26Automatica 29Automation in Construction 3Biomedical Signal Processing and Control 31Building and Environment 4Chemical Engineering Journal 28Chemical Engineering Research and Design 28Chemical Engineering Science 28Chinese Journal of Aeronautics 9CIRP Annals 13CIRP Journal of Manufacturing Science and Technology 14Coastal Engineering 7Computer Methods and Programs in Biomedicine 32Computer Methods in Applied Mechanics and Engineering 1Computers & Fluids 27Computers & Structures 1Computers and Electrical Engineering 12Computers and Electronics in Agriculture 32Computers and Geotechnics 5Computers in Industry 16Construction and Building Materials 3Control Engineering Practice 29Design Studies 15Digital Signal Processing 31Energy and Buildings 4Engineering Analysis with Boundary Elements 2Engineering Applications of Artificial Intelligence 30Engineering Failure Analysis 20Engineering Fracture Mechanics 19Engineering Structures 3European Journal of Mechanics A / Solids 18European Journal of Mechanics B / Fluids 27Experimental Thermal and Fluid Science 26Finite Elements in Analysis and Design 2Fire Safety Journal 6Flow Measurement and Instrumentation 27Geotextiles and Geomembranes 5Integration 12International Communications in Heat and Mass Transfer 26International Journal of Adhesion and Adhesives 22International Journal of Engineering Science 18International Journal of Fatigue 20International Journal of Heat and Fluid Flow 26International Journal of Heat and Mass Transfer 26International Journal of Impact Engineering 22International Journal of Industrial Ergonomics 14International Journal of Machine Tools & Manufacture 14International Journal of Mechanical Sciences 18International Journal of Multiphase Flow 25
PageInternational Journal of Plasticity 22International Journal of Pressure Vessels and Piping 18International Journal of Refrigeration 26International Journal of Rock Mechanics and Mining Sciences 5International Journal of Solids and Structures 19International Journal of Thermal Sciences 25ISA Transactions 30Journal of Applied Mathematics and Mechanics 23Journal of Catalysis 28Journal of Constructional Steel Research 4Journal of Electrostatics 12Journal of Fluids and Structures 27Journal of Manufacturing Processes 14Journal of Manufacturing Systems 14Journal of Materials Processing Technology 13Journal of Membrane Science 28Journal of Non-Newtonian Fluid Mechanics 27Journal of Process Control 30Journal of Sound and Vibration 10Journal of Terramechanics 5Journal of the Mechanical Behavior of Biomedical Materials 22Journal of the Mechanics and Physics of Solids 20Journal of Wind Engineering & Industrial Aerodynamics 4Marine Structures 7Measurement 31Mechanical Systems and Signal Processing 29Mechanics of Materials 18Mechanics Research Communications 18Mechanism and Machine Theory 14Mechatronics 30Microelectronic Engineering 12Microelectronics Journal 11Microelectronics Reliability 11Microprocessors and Microsystems 12NDT & E International 22Nonlinear Analysis: Hybrid Systems 32Nonlinear Analysis: Theory, Methods & Applications 32Ocean Engineering 7Physical Mesomechanics 23Precision Engineering 16 Probabilistic Engineering Mechanics 22Progress in Aerospace Sciences 8Reliability Engineering and System Safety 6Robotics & Computer Integrated Manufacturing 15Sensors and Actuators A: Physical 32Sensors and Actuators B: Chemical 32Signal Processing 31Signal Processing: Image Communication 31Soil Dynamics and Earthquake Engineering 5Space Policy 9Speech Communication 31Structural Safety 6Sustainable Cities and Society 4Systems & Control Letters 30Theoretical and Applied Fracture Mechanics 20Thin-Walled Structures 4Tribology International 20Tunnelling and Underground Space Technology 5Wear 20
Title Index
MA
KE AN IMPACT
2011IMPACT FACTO
R
Impact Factor
1.536