ENGINEERED PRODUCTS QUICKSHIP PROGRAM - … · ENGINEERED PRODUCTS QUICKSHIP PROGRAM Engineered...
Transcript of ENGINEERED PRODUCTS QUICKSHIP PROGRAM - … · ENGINEERED PRODUCTS QUICKSHIP PROGRAM Engineered...
ENGINEERED PRODUCTS
QUICKSHIPPROGRAMEngineered Lifting Beams, Grabs, Tongs,
Pullers, Carriers, Hooks & More!
www.mazzellacompanies.com
www.mazzellacompanies.com
1
QUICKSHIP PROGRAM
Call Your Local Mazzella Companies Locationto Place Your Order Today!
>> Refer to the contact information on the back cover.
QUICKSHIPITEM!ORDER TODAY & ITEM SHIPS WITHIN 10 WORKING DAYS!Note: Excludes Weekends & Holidays
www.mazzellacompanies.com
2
Mazzella Interpretationof Key SpecificationsFrom ANSI / ASME B30.20 BTH Lifting DevicesMarkings and Construction Markings (a) Rated load marking: the rated load of the lifting device shall be marked in the main structure where it is visible. If the listing device is made up of several lifters, each detachable from the group, these lifters shall also be marked with their individual rated loads.(b) Identification:a nameplate or other permanent marking shallbeaffixeddisplayingthefollowinginformation: (1) manufacturer’s name (2) serial number (3) lifter weight, if over 100 lbs. (4) rated load (5) service class (6) designcategory
General ConstructionA lifter shall be designed to withstand the forces imposed byitsratedloadwithaminimumdesignfactorof3,basedonyieldstrength,fortheload-bearingstructuralcomponents.
(a) Welding: all welding shall be in accordance with ANSI / AWS D14.1(b) Guards for moving parts: exposedmovingparts, such as, (but not limited to) gearing, projecting shafts, and chain drives that constitute a hazard under normal operating conditions, should be guarded.(c) Electricalequipment:electrical equipment and wiring shallcomplywithArticle610ofANSI/NFPA70.(d) Modifications:structuralandmechanicalliftersmaybe modifiedorre-ratedprovidedsuchmodificationsare analyzedbyaqualifiedpersonoramanufacturerof structuralormechanicalliftingdevices.Are-ratedlifter, oronewhosecomponentshavebeenmodified,shall betestedaccordingtoANSI/ASMEB30.20section ontesting.Newratedloadshallbedisplayed.
Lifting Device Operating Practices(a) Liftingdevicesshallbeoperatedonlybythe followingqualifiedpersonnel: (1) designated persons. (2) trainees under the direct supervision of a designated person. (3) maintenance and test personnel, when it is necessaryintheperformanceoftheirduties. (4) inspectors (lifting devices).(b) Theliftingdeviceshallnotbeloadedinexcess ofitsratedloadorhandleanyloadforwhich it is not designated.
(c) The lifter shall be applied to the load in accordance with established procedures.(d) Before lifting, the operator shall make sure that lifter ropes or chains are not kinked, and that multiple-partlinesarenottwistedabouteachother.(e) Care should be taken to make certain the load iscorrectlydistributedforthelifterbeingused.(f) Thetemperatureoftheloadshouldnotexceedthe maximumallowablelimitsofthelifter.(g) The lifter shall be brought over the load in such a manner as to minimize swinging.(h) Care shall be taken that there is not sudden acceleration or deceleration of the load.(i) Do not allow load or lifter to come into contact withanyobstruction.(j) Theoperatorshallavoidcarryingtheloadoverpeople.(k) The lifter shall not be used for side pulls or sliding theloadunlessspecificallyauthorizedbya qualifiedperson.
Frequent InspectionItemsshallbeinspectedatintervals,asdefinedabove.In addition, visual observations should be conducted duringregularserviceforanydamageorevidenceof malfunction which appears between regular inspections. Anydeficiencies,suchaslistedbelow,shallbecarefullyexaminedanddeterminationmadeastowhethertheyconstituteahazard:(a) structuraldeformation,cracksorexcessivewearon anypartofthelifter.(b) loose or missing guards, fasteners, covers, stops or nameplates.(c) all functional operating mechanisms and automatic hold and release mechanisms for misadjustments interfering with operation.
Periodic InspectionComplete inspections of the lifter shall be performed at intervalsasdefinedabove.Anydeficiencies,suchaslistedbelow,shallbeexaminedanddeterminationmadeastowhethertheyconstituteahazard.Theseinspectionsshallinclude the requirements of frequent inspections, and in addition,itemssuchasthefollowing:(a) loose bolts or fasteners.(b) crackedorworngears,pulleys,sheaves,sprockets, bearings, chain and belts.(c) excessivewearoflinkagesandothermechanicalparts.(d) excessivewearatthehoisthookingpointsandload support clevises or pins.
The above are general guidelines only. PleaserefertocurrentOSHA,ANSI/ASMEstandardsforcompletespecifications.
www.mazzellacompanies.com
3
TABLE OF CONTENTS…■ Model16—AdjustableSpreader/LiftingBeam ............................................ 4■ Model17—AdjustableLiftingBeam ............................................................... 5■ Model18—FixedTwinBasketSlingLiftingBeam ........................................ 6■ Model19—FixedSpreadLiftingBeam ........................................................... 7■ Model20—LowHeadroomMultipleSpreadLiftingBeam ........................... 8 - 9■ Model22—HeavyDutyTwinBasketSlingLiftingBeam .............................. 10■ Model 25 — Twin Hoist Lifting Beam ............................................................... 11■ Model27SL—BulkContainerLiftingBeams ................................................. 12■ Model30—FixedSpreaderBeams ................................................................. 13■ Model32—AdjustableSpreaderBeams ........................................................ 14■ ModelBEF—SpreaderBeamEndFittings ..................................................... 15■ Model5—SingleForkHook/FixedorSwivel ............................................... 16■ Model10—SingleHookBeamFixedorSwivel ............................................. 17■ Model15—DoubleHookBeamSwivel ........................................................... 17■ ModelFB—TelescopicForkLiftBooms ........................................................ 18■ Model EB — Fixed Length Fork Lift Booms .................................................... 19■ Models 36 & 36E — Fiberglass Battery Lifting Beams ................................... 20■ Model82NC—NarrowCoilC-Hook ................................................................. 21■ Model 80H — Dixon Coil Hook with Pivoting Wedge ...................................... 22■ Model 82 — Heavy Duty C-Hook ....................................................................... 23■ Model82RC—CloseStackingC-Hook ........................................................... 24■ Model82LA—SlitCoilC-Hook ........................................................................ 25■ Model83EW—ExtendedWidthVertical“Eye”CoilLifter ............................ 26■ Model60—HeavyDutySheetLifters .............................................................. 27■ Model90ACL—AdjustableLoadLifter ........................................................... 28■ Model90—StandardFixedForksPalletLifter ............................................... 29■ Model 94 — Lightweight Pallet Lifter ............................................................... 30■ Model BT — Beam Tongs .................................................................................. 30■ Model PLT — Pipe Tongs .................................................................................. 31■ ModelC&S—PipeGrabs ................................................................................. 32■ ModelST—SlabTongs .................................................................................... 33■ ModelAJH/BJH/CJH—J-Hooks .................................................................. 34■ Model FH — Foundry Hooks ............................................................................. 35■ NoTouchHandTools&Devices ...................................................................... 36
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
4
Product Features:
■ Adjustable lifting points. ■ Handles both wide and unbalanced loads. ■ Lowheadroomcapability. ■ Shackles included. ■ Addchaintopriggingforadditionalstability. ■ Optional swivel hooks available. ■ Optional chain top rigging available. ■ Complies with ASME standards.
Product Options:
■ OPTION S-Pairofswivelhooks ■ OPTION C-Chaintoprigging ■ OPTION B1-Onecrossbeam* ■ OPTION B2-Twocrossbeams*
* Specifyspreads
Model 16 —Adjustable Spreader / Lifting Beam
Specifications
ModelNumber
RatedCapacity
(tons)
Spread(in.)
BailAdjustment
(in.)
HRHeadroom
(in.)
Bolt TypeAnchor Shackle
(tons)Weight(lbs.)
Max. Min. Top Bottom16-1/4-4 1/4 48 12 16 7.13 1.5 1.5 40 16-1/2-4 1/2 48 12 16 7.13 1.5 1.5 40 16-1/2-6 1/2 72 36 24 10.00 1.5 1.5 100 16-1/2-8 1/2 96 48 32 10.00 1.5 1.5 135
16-1/2-10 1/2 120 60 40 10.00 1.5 1.5 145 16-1-6 1 72 36 24 10.00 1.5 1.5 100 16-1-8 1 96 48 32 11.00 1.5 1.5 140
16-1-10 1 120 60 40 11.00 1.5 1.5 175 16-2-6 2 72 36 24 12.50 3.25 2 130 16-2-8 2 96 48 32 13.50 3.25 2 200
16-2-10 2 120 60 40 14.50 3.25 2 280 16-4-8 4 96 48 32 16.75 4.75 4.75 290
16-4-10 4 120 60 40 18.75 4.75 4.75 420 16-4-12 4 144 72 48 18.75 4.75 4.75 500 16-5-8 5 96 48 32 18.75 6.5 4.75 320
16-5-10 5 120 60 40 20.25 6.5 4.75 465 16-5-12 5 144 72 48 20.25 6.5 4.75 550 16-7-12 7 144 72 48 23.75 8.5 6.5 790
Operation:
Standard2 Point Lift
Custom3 Point Lift
Custom4 Point Lift
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
5
Product Features:
■ Bailadjustshorizontallyforlifting unbalanced loads. ■ Providesclearanceinlow headroom applications.■ Spreadadjustsin6”increments along lifting beam. ■ Shackles included. ■ Optional swivel hooks available. ■ Complies with ASME standards .
Product Options:
■ OPTION S-Pairofswivelhooks
Model 17 —Adjustable Lifting Beam
Operation:
Bail adjusted for unbalanced load
Lift points adjustedfor load length
Specifications
ModelNumber
RatedCapacity
(tons)
Spread(in.)
Bail Adjustment(in.)
HR Headroom
(in.)
Shackle Size
(tons)
Bail Dimensions (in.) Weight
(lbs.)Max. Min. Range D A B C T
17-1 1/4-6 1-1/4 72 36 24 3 14.7 2 1-1/2 3 5 5/8 150 17-2-6 2 72 36 24 3 14.7 2 1-1/2 3 5 5/8 155 17-4-8 4 96 54 36 6 19.8 3 1/4 2 4 7 3/4 285
17-5-10 5 120 60 36 6 22.4 4 3/4 2 4 7 1 475
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
6
Product Features:
■ Designed to be used with slings in a basket hitch. ■ Providesgreatestclearancein low headroom applications. ■ Two sets of bent bar hooks are standard on units with a spread of 6’andgreater. ■ Spread2is1/2ofspread1. ■ Hooks are designed to handle uptoa2”slingeyewidth. ■ Complies with ASME standards.
Model 18 —Fixed Twin Basket Sling Lifting Beam
Operation:
Specifications
Capacity(tons)
Model NumberHR Headroom (in.)
Weight (lbs.)
Spread (feet) Other Dimensions
(in.)3 * 4 * 6 8 10 12
1/2Model NumberHR Headroom
Weight
18-1/2-38-1/2
40
18-1/2-48-1/2
48
18-1/2-68-1/2
78
18-1/2-88-1/2
95
18-1/2-108-1/2113
18-1/2-129-1/2171
A=7/8 T=3/4B=3 O=2C=5
1Model NumberHR Headroom
Weight
18-1-38-1/2
40
18-1-48-1/2
48
18-1-69-1/2
93
18-1-810-1/2
136
18-1-1010-1/2
175
18-1-1211-1/2239
A=7/8 T=3/4B=3 O=2C=5
2Model NumberHR Headroom
Weight
18-2-39-1/2
52
18-2-410-1/2
75
18-2-610-1/2
139
18-2-811-1/2169
18-2-1012-1/2
246
18-2-1213-1/2
326
A=7/8 T=3/4B=3 O=2C=5
5Model NumberHR Headroom
Weight
18-5-313-1/2
104
18-5-414-1/2
135
18-5-615-1/2
211
18-5-816-1/2
310
18-5-1017-1/2
423
18-5-1219-1/2
618
A=2 T=1-1/4B=4 O=2C=7
7-1/2Model NumberHR Headroom
Weight
18-7 1/2-312
125
18-7 1/2-414
185
18-7 1/2-615
315
18-7 1/2-817
475--- ---
A=2 T=1-1/4B=4 O=2C=7
QUICKSHIPITEM!
* 3’ and 4’ beams are provided with one set of bent bar hooks.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
7
Model 19 —Fixed Spread Lifting BeamProduct Features:
■ Providesclearance in low headroom applications.■ Bentbarbailforeasy crane hook attachment. ■ Eyehookswithhooklatchesstandard.■ Fixedspread. ■ Complies with ASME standards.
Operation:
Specifications
Capacity(tons)
Model Number HR Headroom (in.)
Weight (lbs.)
Spread (feet) OtherDimensions
(in.)2 3 4 6 8 10
1/2Model NumberHR Headroom
Weight
19-1/2-213.31
20
19-1/2-313.31
26
19-1/2-413.31
33
19-1/2-613.31
48
19-1/2-814.31
75
19-1/2-1014.31
93
A=.75 O=.89B=3C=5
1Model NumberHR Headroom
Weight
19-1-214.31
26
19-1-314.31
35
19-1-414.31
44
19-1-615.31
72
19-1-815.31
93
19-1-1016.31 131
A=1 O=.89B=6C=5
2Model NumberHR Headroom
Weight---
19-2-316.75
45
19-2-416.75
55
19-2-619.75 108
19-2-819.75 140
19-2-1019.75 188
A=1 O=1B=6C=5
3Model NumberHR Headroom
Weight---
19-3-318.00
58
19-3-420.00
87
19-3-620.00 118
19-3-820.00 222
19-3-1020.00 272
A=1.5 O=1B=6C=5
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
8
Model 20 — Low Headroom Multiple Spread Lifting BeamIdeal where headroom is limited.Product Features:■ Beamsover4’have3spreads.■ 3’&4’beamshave2spreads.■ Swivel hooks with hook latches standard .■ Wide range of sizes and capacities available.■ Complies with ASME standards.
Standard Feature:Threespreadstoadjusttotheload:■ Outside spread■ Middle spread (outside less 1’)■ Insidespread(outsideless2’)
Specifications
Capacity(tons)
Model NumberHR Headroom (in.)
Weight (lbs.)
Outside Spread (feet)
3 4 6 8 10 12
1/2Model NumberHR Headroom
Weight
20-1/2-312-3/4
40
20-1/2-412-3/4
50
20-1/2-612-3/4
65
20-1/2-812-3/4
95
20-1/2-1013-3/4
140
20-1/2-1213-3/4
160
1 Model NumberHR Headroom
Weight
20-1-312-3/4
40
20-1-412-3/4
50
20-1-613-3/4
85
20-1-813-3/4
115
20-1-1014-3/4
165
20-1-1215-3/4
230
2 Model NumberHR Headroom
Weight
20-2-313-3/4
50
20-2-413-3/4
65
20-2-614-3/4
100
20-2-816-1/2
165
20-2-1017-1/2
230
20-2-1218-1/4
315
3 Model NumberHR Headroom
Weight
20-3-315-1/4
70
20-3-415-1/4
80
20-3-616-1/4
140
20-3-817-1/4
200
20-3-1018-1/4
275
20-3-1222-1/2
415
5 Model NumberHR Headroom
Weight
20-5-319-1/2
115
20-5-420-1/2
145
20-5-621-1/2
205
20-5-825-1/2
325
20-5-1025-1/2
390
20-5-1227-1/2
580
7-1/2Model NumberHR Headroom
Weight
20-7 1/2-322-1/2
135
20-7 1/2-423-1/2
170
20-7 1/2-625-1/4
265
20-7 1/2-827-1/4
415
20-7 1/2-1027-1/4
500
20-7 1/2-1230-1/4
910
10 Model NumberHR Headroom
Weight
20-10-323-1/4
150
20-10-425-1/4
205
20-10-627-1/4
335
20-10-827-1/4
420
20-10-1030-1/4
775
20-10-1230-1/4
910
15 Model NumberHR Headroom
Weight
20-15-328-1/2
215
20-15-430-1/2
295
20-15-630-1/2
375
20-15-833-1/2
685
20-15-1033-1/2
820
20-15-1240-1/41,180
20 Model NumberHR Headroom
Weight
20-20-338-3/4
370
20-20-438-3/4
435
20-20-638-3/4
575
20-20-838-3/4
710
20-20-1041-1/21,070
20-20-1241-1/21,235
25 Model NumberHR Headroom
Weight---
20-25-441-3/8
470
20-25-641-3/8
590
20-25-844-3/8
925
20-25-1044-3/81,100
20-25-1244-3/81,650
30 Model NumberHR Headroom
Weight---
20-30-445-1/2
525
20-30-645-1/2
660
20-30-848-1/41,010
--- ---
40 Model NumberHR Headroom
Weight---
20-40-444-3/4
600
20-40-647-3/4
930 --- --- ---
Othersizesavailable,consultyourlocalLiftingSpecialist.
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
9
Specifications (Continued)Model Number
HR Headroom (in.)Weight (lbs.)
Outside Spread (feet) Other Dimensions (in.)14 16 18 20 24 30
Model NumberHR Headroom
Weight
20-1/2-1414-3/4
230
20-1/2-1615-3/4
305
20-1/2-1816-3/4
400
20-1/2-2016-3/4
450
20-1/2-2420-1/4
830
20-1/2-3022-1/41,340
A=7/8 T=3/4B=3 O=7/8C=5
Model NumberHR Headroom
Weight
20-1-1416-3/4
320
20-1-1618-1/2
415
20-1-1820-1/4
605
20-1-2020-1/4
675
20-1-2422-1/41,095
---A=7/8 T=3/4B=3 O=7/8C=5
Model NumberHR Headroom
Weight
20-2-1420-1/4
480
20-2-1620-1/4
540
20-2-1824-3/4
800
20-2-2024-3/4
900
20-2-2427-3/41,730
---A=7/8 T=3/4B=3 O=7/8C=5
Model NumberHR Headroom
Weight
20-3-1424-1/2
650
20-3-1624-1/2
730
20-3-1827-1/21,295
20-3-2027-1/21,450
20-3-2427-1/21,765
---A=1-1/4 T=1B=3 O=1C=5
Model NumberHR Headroom
Weight
20-5-1427-1/2
690
20-5-1630-1/41,210
20-5-1830-1/41,340
20-5-2030-1/41,505
20-5-2433-1/42,275
---A=2 T=1-1/4B=4 O=1-15/16C=7
Model NumberHR Headroom
Weight
20-7 1/2-1430-1/41,070
20-7 1/2-1630-1/41,600
20-7 1/2-1833
1,665 --- --- ---
A=2 T=1-1/4B=4 O=1-1/2C=7
Model NumberHR Headroom
Weight
20-10-1430-1/41,075
20-10-1633
1,500
20-10-1833
1,670 --- --- ---
A=2 T=1-1/4B=4 O=1-9/16C=7
Model NumberHR Headroom
Weight
20-15-1440-1/41,385
--- --- --- --- ---A=2-1/2 T=1-1/2B=5 O=2-1/16C=9
Model NumberHR Headroom
Weight--- --- --- --- --- ---
A=2-1/2 T=1-1/2B=5 O=2-1/4C=9
Model NumberHR Headroom
Weight--- --- --- --- --- ---
A=3 T=1-3/4B=6 O=2-1/4C=12
Model NumberHR Headroom
Weight--- --- --- --- --- ---
A=3-1/2 T=2B=7 O=2-1/4C=16
Model NumberHR Headroom
Weight--- --- --- --- --- ---
A=3-1/2 T=2-1/2B=7 O=3C=16
Model 20 — Low Headroom Multiple Spread Lifting Beam (Continued)Options:
RecommendFaspins(OptionB)iffrequenthookpositionchanges(spread)arerequired.
OPTION AExtra Holes or Different
Placement of HolesAllows multiple hook positioning
beyond standard spreads. Specify number and spread(s) required.
OPTION BFaspins
For ease of positioning hooks with quick release. Specify
number required.
OPTION CExtra Hooks
Allows for multiple pick points. Specify number
required.
OPTION DPin Type Bail
Lifting pin located between structural channel. (Hoist hook information must be supplied.)
OPTION EShackle Lug
Lifting lug with shackle. (Headroom may change.)
Othersizesavailable,consultyourlocalLiftingSpecialist.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
10
Model 22 —Heavy Duty Twin Basket Sling Lifting BeamProduct Features:
■ Designed to be used with slings in a basket hitch. ■ Speciallydesignedhookswithhooklatches minimize potential sling damage. ■ Twosetsoffixedhooksarestandardin all lengths over 4’. ■ Theinnersetofhooks(S2)are1/2the overall spread. ■ Extraspreadsavailableuponrequest. ■ Complies with ASME standards.
QUICKSHIPITEM!
SpecificationsCapacity
(tons)Model Number
HR Headroom (in.)Weight (lbs.)
Spread (feet) OtherDimensions
(in.)3 4 6 8 10 12
1/2Model NumberHR Headroom
Weight
22-1/2-38-1/2
50
22-1/2-48-1/2
65
22-1/2-68-1/2110
22-1/2-88-1/2150
22-1/2-109-1/2200
22-1/2-129-1/2220
A=7/8 T=3/4B=3 O=1-1/16C=5
1 Model NumberHR Headroom
Weight
22-1-38-1/2
50
22-1-48-1/2
65
22-1-69-1/2145
22-1-810-1/2
210
22-1-1010-1/2
230
22-1-1211-1/2290
A=7/8 T=3/4B=3 O=1-1/8C=5
2 Model NumberHR Headroom
Weight
22-2-39-1/2
70
22-2-410-1/2
90
22-2-610-1/2
160
22-2-811-1/2225
22-2-1012-1/2
300
22-2-1213-1/2
375
A=7/8 T=3/4B=3 O=1-1/8C=5
5 Model NumberHR Headroom
Weight
22-5-313-1/2
90
22-5-414-1/2
160
22-5-615-1/2
275
22-5-816-1/2
350
22-5-1016-1/2
450
22-5-1216-1/2
500
A=2 T=1B=4 O=1-1/8C=7
7-1/2Model NumberHR Headroom
Weight
22-7 1/2-314-1/2
155
22-7 1/2-415-1/2
180
22-7 1/2-616-1/2
330
22-7 1/2-817-1/2
410
22-7 1/2-1017-1/2
500
22-7 1/2-1219-1/2
700
A=2 T=1-1/4B=4 O=1-3/4C=7
10 Model NumberHR Headroom
Weight
22-10-315-1/2
150
22-10-416-1/2
200
22-10-617-1/2
360
22-10-819-1/2
500
22-10-1022-1/2
850
22-10-1219-1/21,000
A=2 T=1-1/4B=4 O=1-3/4C=7
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
11
Model 25 — Twin HoistLifting BeamProduct Features:
■ Use two or more hoists to increaseliftingstability.■ Swivel hook with hook latch.■ Several options are available for added versatility.■ Complies with ASME standards.
SpecificationsCapacity
(tons)Model Number
HR Headroom (in.)Weight (lbs.)
Spread (feet) OtherDimensions
(in.)6 8 10 12 14 16
2 Model NumberHR Headroom
Weight
25-2-616-3/4
125
25-2-816-3/4
160
25-2-1017-3/4
240
25-2-1217-3/4
280
25-2-1418-3/4
360
25-2-1618-3/4
400
A=1-1/2 T=5/8B=3 O=1-1/8C=5
4 Model NumberHR Headroom
Weight
25-4-620
160
25-4-821
240
25-4-1022
310
25-4-1223
410
25-4-1423
500
25-4-1625
725
A=1-1/2 T=5/8B=3 O=1-1/2C=5
6 Model NumberHR Headroom
Weight
25-6-627-1/2
220
25-6-828-1/2
300
25-6-1028-1/2
380
25-6-1230-1/2
550
25-6-1430-1/2
640
25-6-1630-1/2
780
A-1-1/2 T=3/4B=3 O=2-1/16C=5
10 Model NumberHR Headroom
Weight
25-10-629
340
25-10-829
420
25-10-1032
800
25-10-1232
920
25-10-1432
1,100
25-10-1632
1,220
A=2 T=1B=4 O=2-1/4C=7
15 Model NumberHR Headroom
Weight---
25-15-838-1/4
740
25-15-1038-1/4
865
25-15-1238-1/41,050
25-15-1441-1/41,930
25-15-1641-1/22,158
A=2 T=1-1/4B=4 O=2-1/4C=7
20 Model NumberHR Headroom
Weight---
25-20-835-1/2
830
25-20-1038-1/21,130
25-20-1238-1/21,266
25-20-1438-1/21,926
25-20-1638-1/22,196
A=2 T=1-1/4B=4 O=3C=7
OPTION D:Roller bearing hook shown (standard on 30 and 40 ton models).
QUICKSHIPITEM!
OPTION AOff-set hook for hoists of
different capacities.
OPTION BMultiple load hooks, some
outside the bail span.
OPTION CCenter bail and extra pair of hooks
for maximum versatility.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
12
Model 27SL —Bulk ContainerLifting Beams Product Features:
■ Constructed of tubing for smooth surface with no sharp edges. ■ Low headroom design. ■ Easilyattachtoloadwith open lifting lugs. ■ Lug spacing will hold up to a 3”wideloop.■ Oversizedliftingeyetoaccept a wide range of hooks. ■ Complies with ASME standards.
SpecificationsModel
NumberCapacity
(lbs.)Span(in.)
Weight(lbs.)
27SL-1MT-36 2,200 36 15027SL-1MT-48 2,200 48 18527SL-2MT-36 4,400 36 15527SL-2MT-48 4,400 48 190
QUICKSHIPITEM!NOTE:Alldimensionsshownininches.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
13
QUICKSHIPITEM!
Model 30 —Fixed SpreaderBeamsProduct Features:
■ Ideal where headroom is not limited.■ Addsstabilitytolift.■ Available with standard chain or wire rope rigging.■ AvailablewithAdjust-A-Leg®
adjustment (minimum lifting capacitywillbeapproximately 10-15%ofbeamrating).■ Wide range of additional sizes and capacities available.■ Complies with ASME standards.
ShownWithOPTION CPleaseSpecifyTop Rigging
SpecificationsCapacity
(tons)Model Number
HR Headroom (in.)Weight (lbs.)
4 6 8 10 12 16 20 24 Other
Dimensions(in.)
2 Model NumberHR Headroom
Weight
30-2-434 45
30-2-646 60
30-2-858 82
30-2-1070 95
30-2-1282 115
30-2-16106 225
30-2-20132 408
30-2-24156 445
A=1/2 F=4-1/4B=2-1/2 O=31/32C=5
5 Model NumberHR Headroom
Weight
30-5-437 62
30-5-649 78
30-5-861
100
30-5-1073 117
30-5-1283
168
30-5-16110 305
30-5-20134 435
30-5-24158 661
A=1 F=6B=3-1/2 O=1-1/16C=7
10 Model NumberHR Headroom
Weight
30-10-441
100
30-10-653
122
30-10-864
156
30-10-1077
180
30-10-1286
240
30-10-16113 380
30-10-20138 532
30-10-24163 915
A=1-1/4 F=8-1/8B=4-3/8 O=1-1/2C=8-3/4
15Model NumberHR Headroom
Weight
30-15-443
126
30-15-655
155
30-15-865
185
30-15-1080
242
30-15-1292
270
30-15-16116 420
30-15-20140 665
30-15-24167 953
A=1-1/2 F=9-1/4B=5-1/4 O=1-3/4C=10-1/2
20 Model NumberHR Headroom
Weight
30-20-446
170
30-20-658
200
30-20-869
233
30-20-1082
315
30-20-1294
350
30-20-16118 540
30-20-20140 775
30-20-24170
1,341
A=1-3/4 F=9-3/4B=6 O=2C=12
30 Model NumberHR Headroom
Weight---
30-30-660
285
30-30-870
402
30-30-1083
440
30-30-1295
530
30-30-16120 888
30-30-20145
1,390 ---
A=1-3/4 F=9-3/4B=6 O=2C=12
40 Model NumberHR Headroom
Weight---
30-40-665
563
30-40-877
695
30-40-1089
781
30-40-12102
1,058
30-40-16127
1,364 --- ---
A=2 F=13B=7 O=2-3/4C=14
NOTE: Weight = Beam and hooks only -- (no top rigging).
OPTION CChain top rigging frombeam to crane hook.
Top Rigging Options: OPTION WWire rope top rigging from
beam to crane hook.
OPTION AAdjust-A-Leg® sling top rigging for
off-center load adjustment(not included in QUICKSHIP Program).
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
14
Model 32 —Adjustable SpreaderBeams Product Features:
■ Ideal where headroom is not limited. ■ Addsstabilitytolift.■ Telescopic spread standard.■ Spreadadjustsin1”increments.■ Available with standard chain or wire rope rigging.■ AvailablewithAdjust-A-Leg® rigging for off center load adjustment (minimum lifting capacitywillbeapproximately 10-15%ofbeamrating). ■ Wide range of additional sizes and capacities available.■ Complies with ASME standards.
QUICKSHIPITEM!
ShownWithOPTION CPleaseSpecifyTop Rigging
Specifications
Capacity(tons)
ModelNumber
Spread(ft.)
Min. / Max.
HR HeadroomMin. / Max.w/ Chain
(in.)
WeightBeam &Hooks(lbs.)
AOblong
Dia.(in.)
BOblongWidth(in.)
COblongHeight
(in.)
FHook To
BeamBottom
(in.)
OHook
Openingw/ Latch
(in.)
ChainRiggingWeight(lbs.)
2
32-2-4/6 4/6 48/57 70
1/2 2.36 3.94 5.5 0.97
9 32-2-6/10 6 / 10 72/88 85 13 32-2-8/14 8 / 14 96/113 175 17
32-2-12/20 12 / 20 132/166 245 23
5
32-5-4/6 4/6 55/64 105
1 5.38 7.09 8.4 1.41
34 32-5-6/10 6 / 10 79/95 160 47 32-5-8/14 8 / 14 102/126 205 61
32-5-12/20 12 / 20 138/172 670 82
10
32-10-4/6 4/6 60/69 130
1-1/4 5.71 10.83 10.6 1.78
49 32-10-6/10 6 / 10 74/111 175 69 32-10-8/14 8 / 14 108/132 460 88
32-10-12/20 12 / 20 144/163 680 118
15
32-15-4/6 4/6 64/72 165
1-1/2 5.90 10.5 13.6 2.22
78 32-15-6/10 6 / 10 87/104 365 111 32-15-8/14 8 / 14 111/135 478 145
32-15-12/20 12 / 20 147/180 700 194
OPTION CChain top rigging frombeam to crane hook.
Top Rigging Options: OPTION WWire rope top rigging from
beam to crane hook.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
15
QUICKSHIPITEM!Product Features:
■ Buildyourownspreaderbeam.■ Designed to work with a range of shackle sizes, both top and bottom.■ Complies with ASME standards whenassembledtospecifications usingA53GradeB,schedule 40 pipe.
Model BEF —Spreader BeamEnd Fittings
Assembly Information:
TheModelBEFisdesignedtouseA53GradeB,schedule40pipeasthecentralstructuralelementbetweentheendfittings.Thisstructuralmaterialisreadilyavailableatmoststeelservicecenters.TheModelBEF-2-1/2requiresa2-1/2”nominalsize,theModelBEF-5requiresa5”nominalsize,andtheBEF-8requiresan8”nominalsizeA53GradeB,schedule40pipe.
Other requirements are:
■ Thelengthofpipeusedforthiscentralelementmustbestraightwithin1/4”endtoend.■ Thepipeshouldhavetheendscleanlycutsquarewithitscenterline.■ TheA53GradeB,schedule40pipeshouldnothaveanyweldjointirregularities.■ EachendoftheA53GradeB,schedule40pipemusthavethecorrectdiameterholesdrilledthroughbothwallsand both ends must be in line.■ TheA53GradeB,schedule40pipeusedinthisapplicationdoesnotneedtopassanypressuretesting.
TheretainingboltsusedtosecuretheModelBEF2-1/2and5totheA53GradeB,schedule40pipemustbeaGrade5HexHeadCapScrew5/8-11withminimumlengthof4-1/2”and8”respectively.TheboltfortheBEF-8isaGrade5HexHeadCapScrew1-8withaminimumlengthof11-1/2”.
NOTE: Completeassemblyinstructionsareprovidedwitheachsetofendfittings.
SpecificationsModel Number
Spread (ft.)Capacity (tons) Weight
(lbs.)4 5 6 8 10 12 14 15 16 18 20 22 24 26 28 30 32 34 36BEF-2-1/2 7.5 7 6.5 5.5 4 2.9 2 1.8 --- --- --- --- --- --- --- --- --- --- --- 16
BEF-5 17 17 17 17 17 16 15 14 13 12 10 8 7 6 5 4.5 --- --- --- 46BEF-8 39 39 39 39 39 38 36 36 35 33 31 29 27 25 23 21 19 16 15 266
NOTE: Capacity based on minimum 45° top rigging angle.
Shownfullassemblywithcustomersuppliedrigging and bar.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
16
Fork Lift Beams are specifically designed to make fork lifts moreversatile by providing positive handling of loads otherwiseimpractical for fork lifts.
Product Features:
■ Easyattachment,nospecialwrenches or tools needed.■ Strong,sturdy,allweldedconstruction.■ Easytosee,highlyvisibleyellowpaint.■ Custom designs available.
Models 5, 10 & 15 —Fork Lift Beams
QUICKSHIPITEMS!
SpecificationsModel
NumberFixed
ModelNumberSwivel
RatedCapacity
(lbs.)
Dimensions (inches)Weight(lbs.)A B C
FixedC
Swivel D O
5-1 1/2-4 5S-1 1/2-4 3,000 4-1/2 2-1/2 4-11/16 6-9/16 1 1 75-1 1/2-5 5S-1 1/2-5 3,000 5-1/2 2-1/2 4-11/16 6-9/16 1 1 85-1 1/2-6 5S-1 1/2-6 3,000 6-1/2 2-1/2 4-11/16 6-9/16 1 1 9
Model 5 —Single Fork Hook / Fixed or Swivel
Capacity of lift truckand attachment combination
may be less than capacity shown on attachment. Consult
lift truck manufacturer.
WARNINGQUICKSHIPITEM!
Fixed HookShown
SwivelHookShown
Model 5
Model 10
Model 15
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
17
Model 10 —Single Hook BeamFixed or Swivel
QUICKSHIPITEM!
SpecificationsModel
NumberFixed
ModelNumberSwivel
RatedCapacity
(lbs.)
Dimensions (inches)Weight(lbs.)A C D F
FixedF
Swivel E O
10-2-20 10S-2-20 4,000 20 3-1/4 9-1/8 7-1/4 8-7/8 1-1/8 1-5/32 2110-5-24 10S-5-24 10,000 24 3-1/4 10-3/4 9-1/4 11-7/16 1-13/16 1-11/16 4210-5-36 10S-5-36 10,000 36 3-1/4 16-3/4 9-1/4 11-7/16 1-13/16 1-11/16 80
10-7.5-36 10S-7.5-36 15,000 36 4-1/4 16-1/4 13-3/4 15-3/4 2-1/4 2-7/32 16610-10-36 10S-10-36 20,000 36 4-1/4 16 14-5/8 16-7/16 2-19/32 2-13/32 18010-15-36 10S-15-36 30,000 36 4-1/4 15-7/8 14-1/2 16-5/16 2-19/32 2-13/32 210
QUICKSHIPITEM!
Model 15 —Double Hook BeamSwivel
SpecificationsModel
NumberRated
Capacity(lbs.)
Dimensions (inches) Weight(lbs.)A B C D E O
15-2-20 4,000 20 6-5/8 2-1/2 10-3/8 1-7/16 1-11/32 6015-5-24 10,000 24 9-3/8 2-1/2 11-21/32 1-7/16 1-11/32 68
Capacity of lift truckand attachment combination
may be less than capacity shown on attachment. Consult
lift truck manufacturer.
WARNING
Capacity of lift truckand attachment combination
may be less than capacity shown on attachment. Consult
lift truck manufacturer.
WARNING
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
18
The Fixed Boom, Model FB,has a telescoping boom with a maximum horizontal reach of12 feet. This model is availablein 3,000, 4,000, 6,000 and8,000 lb. capacities.
Product Features:
■ Alternate hook positions.■ Telescoping boom.■ Restraining chain with grab hook.■ Handleatendforeasyextension.■ Fixedorswivelhooksavailable.■ Boomlockingt-pin.
Models FB —Telescopic Fork Lift Booms
QUICKSHIPITEM!
Model FBFixed TypeFork Lift Boom
SpecificationsModel
NumberDimensions (in.) Maximum Capacity @ Hook Position (lbs.) Weight
(lbs.)A B C HR O 3’-6’ 7’ 8’ 9’ 10’ 11’ 12’FB-30
2-1/2 7-1/2 22 16 1.00 3,000 3,000 2,600 2,200 1,900 1,600 1,500 340
FB-40 16 1.09 4,000 3,200 2,600 2,200 1,900 1,600 1,500 340
FB-602-1/2 7-1/2 22
17 1.36 6,000 5,000 4,200 3,500 3,000 2,700 2,500 390
FB-80 18 1.61 8,000 7,000 5,700 4,800 4,100 3,600 3,100 520
NOTE: All dimensions on drawings shown in inches unless stated.
Capacity of lift truck andattachment combination
may be less than capacity shown on attachment.
Consult lift truck manufacturer.
WARNING
NOTE: Models FB-30 and FB-40 are only available with swivel hooks.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
19
Use efficient, economicalFixed Length Boom attachment when telescoping is not required.
Product Features:
■ Fixedlength.■ Restraining chain with grab hook.
EB-15 – Lightweight:
■ Acceptsuptoa2”widesling.■ Optional swivel hook available.
EB-40 – Fixed Length:
■ 5alternatehookpositions.■ Fixedorswivelhooksavailable.
Models EB —Fixed Length Fork Lift Booms
QUICKSHIPITEM!
Fixed LengthModel EB-40Shown
Specifications
ModelNumber
MaximumCapacity
(lbs.)
HeadroomHR(in.)
HookOpening
O (in.)
Maximum Capacity @ Hook Position (lbs.) Weight(lbs.)4’ 5’ 6’ 7’ 8’
EB-15 1,500 7.00 1.00 --- --- --- --- --- 185
EB-40 4,000 6.30 1.09 4,000 3,500 3,000 2,500 2,000 240
NOTE: All dimensions on drawings shown in inches unless stated.
Capacity of lift truck andattachment combination
may be less than capacity shown on attachment.
Consult lift truck manufacturer.
WARNING
EB-40
EB-15
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
20
Used for applications that require anon-conductive beam such as lifting industrial fork lift truck batteries.
Product Features:
■ Lightweightunits—70%lighterthanotherbeams.■ Models are available for handling batteries of equal length or of different lengths.■ Heavyduty4,800lb.and7,000lb.capacities.■ Non-conductivefiberglassbeamconstruction.■ Acid-resistant,coatedpolyesterstrapsandhooks.■ Standarddropslinglengthis10”,otherlengths available upon request.
Models 36 & 36E —Fiberglass BatteryLifting Beams
QUICKSHIPITEM!
Specifications — Model 36: Fixed(Batteries of Equal Length)
ModelNumber
RatedCapacity
(lbs.)
StandardSpread
(in.)
Dimensions (inches) Weight(lbs.)A B C D E F
36-2.4 4,800 36 5/8 3 6 11 27/32 21/32 1636-3.5 7,000 36 3/4 2-3/4 5-1/2 12 1 1 20
NOTE: For battery beams other than standard spread. Measure distance between lifting points.Specify Model 36 with beam spread (in even inches) equal to length measured.
Specifications — Model 36E: Adjustable(Batteries of Different Length)
ModelNumber
RatedCapacity
(lbs.)
StandardSpread
(in.)
Dimensions (inches) Weight(lbs.)A B C D E F
36E-2.4 4,800 36 5/8 3 6 21 1 1 1736E-3.5 7,000 36 3/4 2-3/4 5-1/2 22-1/2 1-1/8 1-1/8 20
NOTE: For Model 36E lifting beams, battery length cannot differ more than 6 inches from length of beam spread.For battery beams other than standard spread. Take average of shortest and longest batteries, and specify Model 36E with beam spread (in even inches) equal to average lengths. Battery length must be within 12 inches, shortest to longest.
OPTION J:J-Hooksavailableinplaceofswivelhooksat a reduced cost. Available upon request.
NOTE: When ordering J-Hook option showModel 36 as 36J, and Model 36E as 36EJ.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
21
Product Features:
■ Handles narrow coils with less coil damage.■ Lightweight for easier handling.■ Built-inguidehandleforease of coil positioning.■ Available with optional curved coil saddle.■ Inside radius on hooks avoid coil edge contact.■ Complies with ASME standards.
Model 82NC —Narrow Coil C-Hook
QUICKSHIPITEM!
Will not hang level when empty.
Load center of gravity must be in-line with the
center of the load.
WARNING
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)
CoilWidthMax.
ThroatLifting Arm Plate
HRHeadroom
Bail DimensionsLength
LDepth
D A B C T
82NC-1/2-882NC-1/2-12 1/2 8
12 14-1/214-1/2
8 12
2-1/42-5/8
18-1/218-1/2
13/1613/16
2 2
3-1/43-1/4
1/21/2
14 17
82NC-1-882NC-1-16 1 8
16 17-1/217-1/2
8 16
2 2-1/2
21-1/221-1/2
13/1613/16
2 2
3-1/43-1/4
1/21/2
15 20
82NC-2-882NC-2-16 2 8
16 19-1/219-1/2
8 16
2-1/83
24-9/1624-9/16
1 1
2-9/162-9/16
4-1/164-1/16
3/43/4
22 40
82NC-3 1/2-1282NC-3 1/2-16 3-1/2 12
16 21-1/221-1/2
12 16
2-7/83-3/8
28-1/828-1/8
1-3/161-3/16
3-5/83-5/8
5-5/165-5/16
1 1
50 63
82NC-5-1682NC-5-20 5 16
20 25-1/225-1/2
16 20
3-1/24
32-13/1632-13/16
1-1/21-1/2
4 4
5-13/165-13/16
1-1/41-1/4
94 110
NOTE: E=(L÷2)+1/2”inch.
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
22
Product Features:
■ Easyhorizontaltovertical upending of coils.■ Pivotingwedgeforeasytilting of stacked coils.■ Wedge acts as retainer.■ Efficientandeasytouse.■ Popularforusewithsmall, lightweight coils.■ Forusewhereoverheadclearance is limited.■ Speciallydesignedheattreated pivoting wedge.■ Complies with ASME standards.
Model 80H —Dixon Coil Hook withPivoting Wedge
QUICKSHIPITEM!
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight (lbs.)Max.
WidthMax.
RadialMin.I.D. A B C D T W
80H-1/2-6/13 1/2 6 13 9 13/16 2 3-5/16 6 1/2 3-1/2 2080H-1/2-12/13 1/2 12 13 13 13/16 2 3-5/16 6 1/2 3-1/2 28
80H-1-8/16 1 8 16 10 13/16 2 3-5/16 6 1/2 3-1/2 2380H-2-10/18 2 10 18 12-1/2 1 2-5/8 4 6-3/4 3/4 2 42
80H-3.5-12/20 3-1/2 12 20 14-1/2 1-3/16 3-5/8 5-5/16 7-3/4 1 2-1/2 80
EASY HORIZONTAL TO VERTICAL MOVEMENT. DO NOT USE FOR VERTICAL TO HORIZONTAL MOVEMENT!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
23
Product Features:
■ Designedforheavyduty applications.■ Hightensilealloysteelplate reducesphysicalsizeandweight.■ Counter balanced to hang level whenempty.■ Inside radius on hooks avoid coil edge contact.■ Curved coil saddle is standard.■ Guidehandlesforeaseof hook positioning.■ Handles a wide range of coil widths.■ Available with optional padding for additional coil protection.■ Complies with ASME standards.
Model 82 — Heavy Duty C-Hook
Center of the hoist and bail must be in-line with the
load’s center of gravity.
WARNING
QUICKSHIPITEM!
NOTE: E=Maximumcoilwidth÷2
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)Coil Width
ThroatLifting Arm
HRHeadroom
Bail DimensionsLength
LDepth
DWidth
WOpening Thk.
Max. Min. A B C T82-5-3682-5-4882-5-60
5364860
243036
242424
303948
5-5/166-1/8
6-9/16
444
37-3/838
38-1/2
1-1/21-1/21-1/2
444
777
1-1/41-1/41-1/4
420584680
82-7 1/2-3682-7 1/2-4882-7 1/2-60
7-1/2364860
243036
242424
303948
5-5/86-5/16
6-15/16
444
37-1/238-1/4
39
1-1/21-1/21-1/2
444
777
1-1/21-1/21-1/2
615774942
82-10-4882-10-6082-10-72
10486072
303642
242424
394857
7-1/47-1/27-1/4
444
41-1/441-3/842-1/2
222
555
999
1-3/41-3/41-3/4
9281,2951,616
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
24
Product Features:
■ Recessed counterweight allows for closestackingofcoilswhichmaximizes floorspace.■ Handles a wide range of coil widths.■ Designedforheavydutyapplication.■ Hightensilealloysteelplatereduces physicalsizeandweight.■ Counter balanced to hang level whenempty.■ Inside radius on hooks avoid coil edge contact.■ Curved coil saddle is standard.■ Guidehandleforeaseof hook positioning.■ Available with optional padding for additional coil protection.■ Complies with ASME standards.
Model 82RC — Close StackingC-Hook
QUICKSHIPITEM!
Center of the hoist and bail must be in-line with the
load’s center of gravity.
WARNING
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)Coil Width
ThroatLifting Arm
HRHeadroom
Bail DimensionsLength
LDepth
DWidth
WOpening Thk.
Max. Min. A B C T82RC-5-3682RC-5-4882RC-5-60
5364860
243036
242424
303948
5-5/166-1/8
6-15/16
444
37-1/438-1/16
38-15/16
1-1/21-1/21-1/2
444
777
1-1/41-1/41-1/4
550707853
82RC-7 1/2-3682RC-7 1/2-4882RC-7 1/2-60
7-1/2364860
243036
242424
303948
5-5/86-3/8
6-15/16
444
37-1/238-1/4
39
1-1/21-1/21-1/2
444
777
1-1/21-1/21-1/2
750996
1,16182RC-10-4882RC-10-6082RC-10-72
10486072
303642
242424
394857
7-3/167-5/87-1/4
444
41-1/441-1/241-1/8
222
555
999
1-3/41-3/41-3/4
1,2001,6452,100
NOTE: E=Maximumcoilwidth÷2
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
25
Product Features:
■ Designedforheavydutyapplications.■ Handles multiple slit coils which maximizeshandlingefficiency.■ Recessed counterweight minimizes interference with equipment or other obstacles.■ Hightensilealloysteelplatereduces physicalsizeandweight.■ Counter balanced to hang level whenempty.■ Inside radius on hooks avoid coil edge contact.■ Curved coil saddle is standard.■ Guidehandlesforeaseof hook positioning.■ Available with optional padding for additional coil protection.■ Complies with ASME standards.
Model 82LA — Slit Coil C-Hook
QUICKSHIPITEM!
NOTE: E=L÷2Center of the hoist and bail must be in-line with the
load’s center of gravity.
WARNING
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)Coil Width
ThroatLifting Arm
HRHeadroom
Bail DimensionsLength
LDepth
DWidth
WOpening Thk.
Max. A B C T82LA-5-3682LA-5-4882LA-5-60
5364860
242424
364860
5-5/166-1/8
6-9/16
444
37-1/438
38-9/16
1-1/21-1/21-1/2
444
777
1-1/41-1/41-1/4
450555649
82LA-7 1/2-3682LA-7 1/2-4882LA-7 1/2-60
7-1/2364860
242424
364860
5-5/86-5/167-1/8
444
37-5/838-5/1638-7/8
1-1/21-1/21-1/2
444
777
1-1/21-1/21-1/2
496731898
82LA-10-4882LA-10-60 10 48
602424
4860
7-3/167-5/16
44
41-1/841-1/8
22
55
99
1-3/41-3/4
9321,281
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
26
Product Features:
■ HandlesanysizecoilI.D. from16”to24”.■ Lifterlegsautomaticallyadjust to coil I.D. being lifted.■ Hashighercapacityrange than standard lifter.■ Unique design minimizes dunnage required between coils.■ Complies with ASME standards.
Model 83EW — Extended Width Vertical “Eye” Coil Lifter
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)Coil I.D. Coil
Width
HRHeadroom Bail Dimensions Foot Dimensions
Min. Max. Open Closed A B C T F D J83EW-5-24 5 16 24 30 47 40-3/8 2 4 7 1 6 1 15-1/2 170
83EW-7 1/2-24 7-1/2 16 24 30 47 40-3/8 2 4 8 1 6 1 15-1/2 170
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
27
Product Features:
■ Versatile handling of bundles, sheets, plates and other materials stackedhorizontally.■ Low headroom design for optimum lifting capabilities.■ One person operation minimizes handling cost.■ Self-lockingwormgeardriveforleg adjustment is standard.■ Easyadjustmentfordifferent sheet widths.■ Rack and pinion leg drive.■ Designed for ease of maintenance.■ Designed for greater sheet width range.■ Complies with ASME standards.
Model 60 —Heavy DutySheet Lifters
Do not lift loosely bundled, thin or oily sheets.
WARNING
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)Bundle Width HR
HeadroomShoe
D Min. AisleBail Opening
Min. Max. A B C T60-3-4860-3-6060-3-72
3161616
486072
28 2.63 9 1.5 3 5 0.75920950980
60-5-4860-5-6060-5-7260-5-8460-5-96
5
1616161616
4860728496
29 2.63 9 2 4 6 1
1,1251,1701,2201,2701,550
60-10-4860-10-6060-10-7260-10-8460-10-96
10
1616161616
4860728496
30 3.5 11 2 4 7 1.5
1,5101,5701,6401,7001,770
60-15-4860-15-6060-15-72
15161616
486072
32 3.5 12 2.5 5 9 1.51,5701,6401,700
Product Options:
■ Hand wheel lockout.■ Motorized leg adjustment.■ Chain-wheellegadjustment.■ Extendedlengthhandwheel leg adjustment.■ End chains with plate hooks (recommended for all widths 72”andgreater).■ Extendedgrabshoelengths available.■ Additional bundle clearance available (longer legs).
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
28
Use your crane to handlea wide range of loads.
Product Features:
■ Once the bail pin is set the pallet lifter remains balanced whether full or emptytomakethejobfasterandsafer.■ Adjustable bail provides for balanced handling of items with different load centers.■ Adjustable throat allows for the correct handling of higher stacked loads.■ Adjustable forks allow for proper placement of the forks spread.■ Theautoreturnbailautomatically levelsemptypalletliftersaving time and effort.■ Heavydutyconstructionforyears of trouble free service.■ Complies with ASME standards.
Model 90ACL —AdjustableLoad Lifter
QUICKSHIPITEM!
Specifications
ModelNumber
RatedCapacity
(tons)
Dimensions (inches)
Weight(lbs.)
Fork Bail ThroatHR Head-
room(at min. throat)
HR Head-room
(at mid. throat)
HR Head-room
(at max. throat)
E F GH
A B C TJ K K K
Min. Max. Min. Mid. Max. Min. Max. Min. Max. Min. Max.90-ACL-2 2 43.00 2.00 4.00 17.50 36.00 .88 3.00 5.00 0.75 40.68 52.68 64.18 54.88 60.68 66.63 72.44 78.38 84.18 515
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
29
Product Features:
■ Converts overhead crane to lift truck.■ Counter balanced to hang level whenempty.■ Maintenance free.■ Allows for ease of loading / unloading innoteasilyaccessibleareas.■ Complies with ASME standards.
Model 90 —Standard Fixed ForksPallet Lifter
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)Forks
EBail Dimensions
J * HRL M N W A B C
90-1-36 1 36 2 2 25 18 1 6 5 48 57-1/2 29290-1-42 1 42 2 2 25 21 1 6 5 48 57-1/2 31090-1-48 1 48 2 2 25 24 1 6 5 48 58-1/2 371
90-1 1/2-36 1-1/2 36 3 2 25 18 1 6 5 48 58-1/2 38890-1 1/2-42 1-1/2 42 3 2 25 21 1 6 5 48 58-1/2 43290-1 1/2-48 1-1/2 48 3 2 25 24 1 6 5 48 58-1/2 459
90-2-36 2 36 3 2 25 18 1 6 5 48 59-1/2 44890-2-42 2 42 4 2 25 21 1 6 5 48 59-1/2 53690-2-48 2 48 4 2 25 24 1 6 5 48 59-1/2 62790-3-42 3 42 4-1/2 2-1/2 25 21 1-1/2 6-1/8 7 48 61-1/2 76690-3-48 3 48 4-1/2 2-1/2 27 24 1-1/2 6-1/8 7 48 61-1/2 82390-3-54 3 54 4-1/2 2-1/2 30 27 1-1/2 6-1/8 7 48 61-1/2 969
* Additional 3” - 4” clearance recommended above load for ease of loading and unloading the lifter.
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
30
Product Features:
■ Dual lift points eliminates need for counterweight.■ Extremelylightweightforease of handling.■ Maintenance free — no moving parts.■ Complies with ASME standards.
Model 94 —LightweightPallet Lifter
QUICKSHIPITEM!
Specifications
ModelNumber
Capacity(tons)
Dimensions (inches)Weight(lbs.)Forks
EBail Dimensions
J HRL M N W A B C
94-1-48 1 36 2 2 25 24 1/2 2-1/2 3-3/4 48 58 24594-2-48 2 36 4 2 25 24 3/4 2-3/4 4-1/2 48 62 42594-3-48 3 36 4-1/2 2-1/2 27 24 1 3-1/2 5 48 65 610
Product Features:
■ Tong provided with lifting shackle.■ Load must be balanced and controlled when lifting.■ Useonlyforverticallifting.■ Foraddedstabilitywhenhandlinglongerloads, use in pairs with a spreader beam.■ Complies with ASME standards.
Model BT —Beam Tongs
QUICKSHIPITEM!
Specifications
ModelNumber
RatedCapacity
(tons)
Dimensions (inches)Headroom Weight
(lbs.)Beam Width Min. - Max.
Max. Flange Thickness
111 - 1 1 5 - 6 5/8 17 15111 - 2 2 6.50 - 8 3/4 19 18111 - 3 3 7.50 - 10 3/4 19 21
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
31
Product Features:
■ PipeTongsaremadeofsturdy construction to handle pipe, round bars and cast pipe.■ Tongs are provided with steel curved gripping arms.■ Optionalreplaceablepolyurethane pads available to protect smooth or polished surfaces.■ Load must be balanced and controlled when lifting.■ Use in pairs with a lifting / spreader beamforaddedstability.■ Complies with ASME standards.
Model PLT —Pipe Tongs Adjustable
Fixed
QUICKSHIPITEM!
Specifications — Fixed DiameterModel
NumberRated
Capacity(lbs.)
Dia.(in.)
HR Headroom
(in.)A
(in.)B
(in.)Weight(lbs.)
108-1/2-5 1,000 5 15.50 0.5 1.31 17108-1-8 2,000 8 23.50 0.5 1.31 25
Specifications — Adjustable DiameterModel
NumberRated
Capacity(lbs.)
Bare Steel Range
Min.-Max. (in.)
Urethane Pad Range
Min.-Max. (in.)
HR Headroom
Min.-Max. (in.)
PadWidth (in.)
A(in.)
B(in.)
Weight(lbs.)
108-1/2-2/4 1,000 2 - 4 1.25 - 3.25 11.21 - 15.15 2.25 0.5 1.31 8108-1-4/8 2,000 4 - 8 3.25 - 7.25 19.18 - 26.49 5 0.5 1.31 29
108-1-7/12 2,000 7 - 12 6.25 - 11.25 25.95 - 35.81 6 0.5 1.31 49108-1-10/15 2,000 10 - 15 9.25 - 14.25 30.03 - 38.67 6 0.5 1.31 77
Operation:
Use only for vertical lifting.
WARNING
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
32
Product Features:
■ Heavydutyautomaticclampingdesign.■ Outriggers stabilize the pipe during lift.■ No blocking is required.■ Theoperatoronlyhastoguidethe clamp into place.■ Pipesarehandledquicklyandefficiently whenproperlybalanced.■ Excellentforcastiron,steelpipe,tubing, andothercylindricalobjects.■ PipegrabsizeslistedhandleASAcast ironpipe—standard,extrastrong, and double strong (all have same O.D.).■ Complies with ASME standards.
Model C&S —Pipe Grabs
QUICKSHIPITEM!
Operation:
The lifter shall not touchobstructions during load
movement. The load or lifter shall not be slid on thefloor or other surface.
WARNING
1. Lower the grab and place on pipe. As rope is loosened grab will open and seat on pipe.2. Lift slowly with grab engaged to check for balance.3. Load should be level when transported. Maximum of 15° angle when positioning pipe.
SpecificationsRated
Capacity(lbs.)
Cast Iron Steel Dimensions (inches)Weight(lbs.)Model
NumberPipe O.D.
(in.)Model
NumberPipe O.D.
(in.) A B C D E F
450 C - 3 4.0 S - 3 3.5 5 10 6 0.38 1.03 1.44 7600 C - 4 4.8 S - 4 4.5 8 14 7 0.44 1.16 1.69 9
1,000 C - 6 6.9 S - 6 6.63 11 17 11 0.50 1.31 1.88 151,400 C - 8 9.05 S - 8 8.63 13 22 14 0.50 1.31 1.88 25
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
33
Product Features:
■ Designedforliftingdryslabsof concrete, stone, or metal that must be protected from scratching or marring.■ Use in construction work to position slabs.■ The curved pads give proper contact for gripping smooth surfaces and handling a large range of sizes.■ Polyurethanegrippingsurfaces are standard.■ A manual latch is standard and locks thetongarmsforeasyplacement on the load.■ Complies with ASME standards.
Model ST —Slab Tongs
QUICKSHIPITEM!
SpecificationsModel
NumberRated
Capacity(lbs.)
Load Width (in.)Min. - Max.
HR Headroom (in.)Min. - Max.
Weight(lbs.)
71-0 1,000 1 - 6 31.30 - 39.58 6571-1 1,000 6 - 10 29.00 - 41.00 7571-2 1,500 8 - 12 23.40 - 34.90 8571-3 1,500 10 - 14 28.60 - 41.20 14571-4 1,500 14 - 18 36.80 - 49.80 14571-5 1,500 18 - 22 45.40 - 60.10 150
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
34
Product Features:
■ Weldedliftingeye■ Heat treated■ Prooftestedto2:1withcertificateissued■ Shot-blastfinishwithrustinhibitor■ Serialnumberandcapacityengravedonproduct■ Custom designs available
Model AJH / BJH / CJH —J-Hooks
AJHStyleA
BJHStyleB
CJHStyleC
SpecificationsStyle A
Model NumberStyle B
Model NumberStyle B
Model NumberWorking Load Limit
(lbs.) A B C D E Weight(lbs.)
AJH-2-031 BJH-2-031 CJH-2-031 250 0.31 5 0.75 1.25 0.25 0.3 AJH-3-038 BJH-3-038 CJH-3-038 350 0.38 6 0.75 1.50 0.38 0.4 AJH-6-050 BJH-6-050 CJH-6-050 650 0.50 8 0.75 2.00 0.50 1.0 AJH-8-063 BJH-8-063 CJH-8-063 850 0.63 9 1.00 2.50 0.63 1.6
AJH-12-075 BJH-12-075 CJH-12-075 1,200 0.75 10 1.00 3.00 0.75 2.6 AJH-15-088 BJH-15-088 CJH-15-088 1,500 0.88 12 1.00 3.50 0.88 4.0 AJH-20-100 BJH-20-100 CJH-20-100 2,000 1.00 14 1.25 4.00 1.00 6.2 AJH-22-113 BJH-22-113 CJH-22-113 2,250 1.13 15 1.25 4.50 1.12 8.5 AJH-27-125 BJH-27-125 CJH-27-125 2,750 1.25 16 1.50 5.00 1.25 12 AJH-30-138 BJH-30-138 CJH-30-138 3,000 1.38 17 1.50 5.50 1.38 15 AJH-35-150 BJH-35-150 CJH-35-150 3,500 1.50 18 2.00 6.00 1.50 20 AJH-40-175 BJH-40-175 CJH-40-175 4,000 1.75 20 2.50 7.00 1.75 31 AJH-50-200 BJH-50-200 CJH-50-200 5,000 2.00 24 3.00 8.00 2.00 53
QUICKSHIPITEM!
www.mazzellacompanies.com
35
Product Features:■ Weldedliftingeye■ Heat treated■ Prooftestedto2:1with certificateissued■ Shot-blastfinishwith rust inhibitor■ Serialnumberandcapacity engraved on product■ Custom designs available
Model FH —Foundry Hook
SpecificationsModel
NumberWorking Load Limit
(lbs.)Dimensions (inches) Weight
(lbs.)A B C D E F G HFH-5-050 500 0.50 6.00 0.75 2.50 0.75 0.71 0.25 0.50 1 FH-8-063 800 0.63 8.50 0.75 3.50 1.50 0.89 0.31 0.50 2
FH-13-075 1,300 0.75 8.50 0.75 3.50 1.50 1.06 0.38 0.50 2.6 FH-16-088 1,600 0.88 8.50 0.88 3.50 1.50 1.06 0.50 0.75 3.5 FH-25-100 2,500 1.00 8.50 1.00 4.00 1.75 1.42 0.50 0.75 5 FH-35-113 3,500 1.13 8.50 1.00 4.00 2.00 1.60 0.56 0.75 6.5 FH-45-125 4,500 1.25 8.50 1.25 4.00 2.00 1.77 0.63 1.00 8.8 FH-60-150 6,000 1.50 8.50 1.25 5.00 2.50 2.13 0.75 1.00 14
QUICKSHIPITEM!
www.mazzellacompanies.com
DO NOT EXCEED RATED CAPACITY.Canfailifdamaged,misusedoroverloaded.Inspectbeforeuse.Useonlyiftrained.DEATHorINJURYcanoccurfromimproperuseormaintenance.
WARNING
36
No Touch Hand Tools& DevicesNo touch hand tools descriptions:
1. Positiondevice,3/8"x24",“Hook”stylewith closedhandle,1018material,paintedsafetyyellow.
2. Positiondevice,1/4"x12",“S”stylehookwith woodhandle,1018material,paintedsafetyyellow.
3. Positiondevice,1/4"x24",“DoubleOpen” stylehookwithbicyclehandle,1018material, paintedsafetyyellow.
4. Positiondevice,1/4"x12",“MHook”,1018material, paintedsafetyyellow.
5. Positiondevice,1/4"x12",“OpenCHook”, 1018material,paintedsafetyyellow.
6. Positiondevice,1/4"x12",“Hook”,1018material, paintedsafetyyellow.
7. Positiondevice,1/4"x12",“DoubleSHook”, 1018material,paintedsafetyyellow.
8. Positiontool,1/4"x12",“StaggeredDoubleHook”, paintedsafetyyellow.
9. Bolt-onorweld-onhandlesforMasterRings– eliminates pinch points between crane hook and masterring.Availablefor1″thru2-3/4″masterrings.
10. Positiondevice,nylonwebtagline18"with Velcro®and1/4"steelrod.Allstrapsusenylonto keepthemtogether.Alsoavailablein36"length.
11. Positiondevice,nylonwebtagline18"with Velcro®andPVCstiffener.Allstrapsusenylon tokeepthemtogether.Alsoavailablein36"length.
12. Positiontool,1/4"x12",“StaggeredDoubleHook” stylewithplastichandle,paintedsafetyyellow.
13. Positiondevice,nylon—chain,1"roundsleevewith Velcrolightenerfor3/8″chainwithhandle.
14. Positiondevice,nylonwebtagline6"withVelcro® andPVCstiffener.Allstrapsusenylontokeep themtogether.Alsoavailablewith1/4"steelrodin placeofPVCstiffener.
All above devices are availablein various lengths and handle types—contact your local Lifting Specialist
for more details.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PLEASE NOTE!THESEITEMSARECUSTOM-MADEANDARENOTPARTOFOURQUICKSHIPPROGRAM.CALL 1-800-362-4601 FOR DETAILS!
www.mazzellacompanies.com©2016MazzellaCompanies.V2-0316
ENGINEERED PRODUCTS
QUICKSHIP PROGRAMAll items ship in 10 working days—unless otherwise specified!
Note: Excludes Weekends & Holidays
Call your local Mazzella Companies locationto place your order today!
Mazzella Lifting TechnologiesPhone:800-362-4601
www.mazzellalifting.com
Mazzella Crane ServicePhone:877-96-CRANE
www.mazzellacraneservice.com
Indusco Wire Rope & SuppliesPhone:410-727-0665(Baltimore)
Phone:301-499-8800(CapitolHeights)
www.induscowire.com
J Henry Holland Phone:757-460-3300(VirginiaBeach)
Phone:757-827-9600(Hampton)
www.jhenryholland.com
Alabama Sling CenterPhone:205-744-0230
www.alabamaslingcenter.com
Tennessee Sling CenterPhone:901-345-8918(Memphis)
Phone:423-634-9005(Chattanooga)
www.tennesseeslingcenter.com
KCI Crane ServicePhone:205-345-4701
www.kcicraneservice.com
Rouster Lifting & RiggingPhone:304-252-6031
www.rousterwrr.com