Engineered Jet Pumping Systems
Transcript of Engineered Jet Pumping Systems
Surface DataAquisition PLC
Flow Meter
PressureIndicatorTransmitter
Horizontal Pump
Variable FrecuencyDrive with PLC
Motor
Production
Tank
Jet Bottomhole Assembly
Permanet Sensor MandrelOn -O� Tool
Safety Joint
Sliding Sleeve
Perforations
Perforations
Perforations
HYDRAULIC PUMPING SYSTEMWITH HORIZONTAL SURFACE PUMP
Global Petroleum TechnologiesArtificial Lift and Production Solutions
www.gptartificiallift.com
Copyright Global Petroleum Technology © 2016
Engineered Jet Pumping Systems
Over 35 years of global experience engineering proven solutions
Global Petroleum Technologies, (GPT) offers high volume jet pump models for quick Frac Fluid recovery and turn key con-centric coil tubing designs to produce gassy low pressure reservoirs. Only GPT offers the adaptation of one system to the other without the need to pull the well completion and makes the change with turn key responsibility to reduce time and cost. Special tools allow complete well pressure control.
The new generation optimized jet pump design configuration takes every possible measure to optimize performance so you can produce more. We engineer the complete system to reduce maintenance and operating cost. Call to ask how we do it.
Well Testing and Monitoring: State of the art Permanent Downhole pressure and temperature instrumentation are recommended on every lift system. Information is used to optimize production and monitor the operation to insure reduced operating cost. Solutions for well intervention without removal of the well completion or lift system are options offered only by GPT.
Multiple Zones: Selective completions or comingled production are produced while monitoring producing Bot-tomhole pressure to gain valuable productivity data that leads to maximum production at the lowest cost.
Frac Fluid Recovery: GPT provides a new generation High Volume jet pump equipment to reach the greatest pumping potential with hydraulic lift. GPT high volume jet pumps have produced more than 5,000 bpd.
Solids Tolerance: The jet pump has a high tolerance for solids because it has no moving parts and GPT offers engi-neered solids handling solutions.
Gassy Low Pressure Reservoirs: GPT provides the complete well completion with unprecedented surface pressure con-trols and landing equipment. Options to allow conversion of high volume completions to low pressure reservoirs are possible with GPT.
Deviated wells: Jet pumps can pump from highly deviated wells with no rod loading, rod wear or tubing wear
Hydraulically Retrievable: Jet pumps can be retrieved by reverse circulation or Slickline without pulling units.
Deep Wells: Jet Pumps have been used to pump from 15,000 feet.
West Texas Distributor ENERSERV Inc. www.enerservinc.comTel: 432 580 4606