Engine Oil Flush - Nulon · PDF fileAUS info line: 1800 679 922 ... oil into a dirty engine....

1
Part No Pack Size Barcode Carton QTY EOF 300ml 9311090 000391 6 Nulon Products Australia Pty Ltd 17 Yulong Close, Moorebank NSW 2170 Web: www.nulon.com.au AUS info line: 1800 679 922 NZ info line: 0800 454 108 Australian Made & Owned Engine Oil Flush Oil stays in engines longer and works harder than ever before, which creates damaging sludge. Don’t put clean oil into a dirty engine. Use Nulon Engine Oil Flush to remove damaging sludge deposits and extend the life of your engine. Recommended and safe for use in all engine types: petrol, diesel, LPG, old or new. Benefits • Extends engine life • Helps free up sticky valve lifters • Keeps oil strainer & pick-up clean Cleans & removes sludge, dirt & varnish Provides a cleaner environment for new oil • Keeps new oil cleaner for longer Directions for use Add 1 bottle for up to 6 litres of engine oil before oil change. Start engine and let idle for 10-15 minutes. Stop engine and completely drain whilst old oil is still warm. Change oil filter and refill with a quality engine oil. NOTE: To keep your engine clean, use Engine Oil Flush prior to each oil change. Nulon Engine Oil Flush is safe to use with all engine parts and seals. SAFETY DIRECTIONS: Avoid contact with eyes or skin. DO NOT SWALLOW. Keep out of reach of children. Combustible. Keep away from heat or flame. Do not breathe vapour. Wash hands thoroughly after use. Not to be used as a food container. FIRST AID: For advice, contact a Poisons Information Centre (Phone e.g. Australia 131 126; New Zealand 0800 764 766) or a doctor (at once). If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and wash the eye continuously with running water. If skin contact occurs, flush with running water.

Transcript of Engine Oil Flush - Nulon · PDF fileAUS info line: 1800 679 922 ... oil into a dirty engine....

Part No Pack Size Barcode Carton QTY

EOF 300ml 9311090 000391 6

Nulon Products Australia Pty Ltd 17 Yulong Close, Moorebank NSW 2170Web: www.nulon.com.auAUS info line: 1800 679 922NZ info line: 0800 454 108

Australian Made & Owned

Engine Oil FlushOil stays in engines longer and works harder than ever before, which creates damaging sludge. Don’t put clean oil into a dirty engine. Use Nulon Engine Oil Flush to remove damaging sludge deposits and extend the life of your engine. Recommended and safe for use in all engine types: petrol, diesel, LPG, old or new.

Benefits• Extends engine life• Helps free up sticky valve lifters• Keeps oil strainer & pick-up clean• Cleans & removes sludge, dirt & varnish• Provides a cleaner environment for new oil• Keeps new oil cleaner for longer

Directions for use

Add 1 bottle for up to 6 litres of engine oil before oil change. Start engine and let idle for 10-15 minutes. Stop engine and completely drain whilst old oil is still warm. Change oil filter and refill with a quality engine oil.

NOTE: To keep your engine clean, use Engine Oil Flush prior to each oil change. Nulon Engine Oil Flush is safe to use with all engine parts and seals.

SAFETY DIRECTIONS:

Avoid contact with eyes or skin. DO NOT SWALLOW. Keep out of reach of children. Combustible. Keep away from heat or flame. Do not breathe vapour. Wash hands thoroughly after use. Not to be used as a food container.

FIRST AID:

For advice, contact a Poisons Information Centre (Phone e.g. Australia 131 126; New Zealand 0800 764 766) or a doctor (at once). If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and wash the eye continuously with running water. If skin contact occurs, flush with running water.