Eng Mohamed CV-new look

6
Mohamed Metwally PERSONAL DATA Full Name: Mohamed Ahmed Metwally Date of Birth: 1 st of October 1989 Place of Birth: Cairo Nationality: Egyptian Marital Status: Single Location: Jeddah, Makah, Saudi Arabia Military Status: Completed. Driving license in Egypt: Valid Driving license in Saudi- Arabia: Valid CANTACT INFO Mobile: 00966 566464103 Phone: 002 01221246171 Email: [email protected] EDUCATION: 2006-2011 BSc in Mechanical Engineering (Mechatronics Section) The Higher Technological Institute 10th of Ramadan, Egypt. Overall Grade: Good Total Grade: Good Graduation Project Grade: Very Good. 2006 American diploma, St. Peter American School, Egypt.

Transcript of Eng Mohamed CV-new look

Page 1: Eng  Mohamed CV-new look

Mohamed Metwally

PERSONAL DATA

Full Name: Mohamed Ahmed MetwallyDate of Birth: 1st of October 1989Place of Birth: CairoNationality: EgyptianMarital Status: SingleLocation: Jeddah, Makah, Saudi ArabiaMilitary Status: Completed.Driving license in Egypt: ValidDriving license in Saudi- Arabia: Valid

CANTACT INFO

Mobile: 00966 566464103Phone: 002 01221246171Email: [email protected]

EDUCATION:

2006-2011 BSc in Mechanical Engineering (Mechatronics Section) The Higher Technological Institute 10th of Ramadan, Egypt. Overall Grade: Good Total Grade: Good Graduation Project Grade: Very Good.

2006 American diploma, St. Peter American School, Egypt.

PROFESSIONAL EXPERIENCE

Nov. 2014 to Present Production Maintenance & HSE Engineer at Sanofi Multinational Pharmaceutical Company – Saudi Arabia site

Industry: Pharmaceutical Establishing new production factory at Saudi which will service on Gulf area.Install, repair and maintain all plant equipment in the Production Area + fully responsibility for HSE of the Production.Prepare the yearly preventive maintenance plan, and issue the monthly maintenance plan by coordinates with production planning department.Supervise execution of monthly preventive maintenance plan as well as the corrective maintenance jobs for all equipment in the Non Sterile-Production Area, as well as acquires failure data and Prepare effective maintenance plans for restoring equipment to effective operating condition & OEE target.

Page 2: Eng  Mohamed CV-new look

Responsible for technicians training on the new equipment & HSECheck and insure records and updating maintenance works in log books for all machines according to quality requirements.Responsible for localization of machine spare parts and developing in house solution which shall decrease the machine running cost.Prepare Plan and lists for all required spare parts (foreign and local) for all machines every year and execute the plan according to the approved budget.Prepare the monthly department expenses and reviewing it according to the approved budget.Participating in the Lean task force which affect the manufacturing process efficiency and minimize waste and Cost.Responsible for the Engineering Role of the new launchesPrepare, supervise and participate of execution the installation of new equipment as well as the Qualification (IQ) & Operations Qualification (OQ) for equipment in SAT (Site Acceptance Test).

May 2012 to Oct 2014 Production Maintenance Engineer at Sanofi - Egypt(2 years and 5 months) Industry: Pharmaceutical

Install, repair and maintain all plant equipment in the in the Non Sterile-Production Area which consists of:oCentral Packaging area ( Blistering & Cartoning ) Consist of 6

production lines ( Uhlmann , IMA , Marchesini )o Solid Dosage Form area :

o Granulation Area : Hesnchel Mixers , Glatt fluid bed driers , AZO granulator

o Coating Area: Accela coating Pans , Lacquering Panso Compression Area : Compression Machines ( Fette , Courtoy and

Sejong)o Semi Solid Dosage form Area: Adam Preparation system,

UniPack Cream Filling Machine, Sarrong Suppository Filling Line.

o Syrup Area: Syrup preparation filling tanks, KING syrup filling line.

Leading a Maintenance team of 14 Mechanics and 6 Electricians Prepare the yearly preventive maintenance plan, and issue the monthly

maintenance plan by coordinates with production planning department. Supervise execution of monthly preventive maintenance plan as well as

the corrective maintenance jobs for all equipment in the Non Sterile-

Production Area, as well as acquires failure data and Prepare effective maintenance plans for restoring equipment to effective operating condition & OEE target.

Responsible for technicians training on the new equipment. Check and insure records and updating maintenance works in log books

for all Machines according to quality requirements. Responsible for localization of machine spare parts and developing in

house solution which shall decrease the machine running cost. Prepare Plan and lists for all required spare parts (foreign and local) for all

machines every year and execute the plan according to the approved budget.

Page 3: Eng  Mohamed CV-new look

Prepare the monthly department expenses and reviewing it according to the approved budget.

Participating in the Lean task force which affect the manufacturing process efficiency and minimize waste and Cost.

Responsible for the Engineering Role of the new launches Prepare, supervise and participate of execution the installation of new

equipment as well as the Qualification (IQ) & Operations Qualification (OQ) for equipment in SAT (Site Acceptance Test).

TRAINING EXPERIENCE:

Mercedes Benz : From 24 / 05 / 2008 Till 24 / 07 / 2008

Audi & Volkswagen : From 23 / 05 / 2009 Till 23 / 07 / 2009

Egypt Air : From 6 / 06 / 2010 Till 6 / 08 / 2010

Abu Ghaly Auto Motive (SUBARU) : from 27 / 06 / 2011 Till 27 / 07 / 2011

Certificates:

Classic Control at ( Jelecom Training Center “Ain Shams University” )

Making an American Board ( Professional Engineer )

Course in PLC at ( Seniors Professional Center ) with Excellent Grade

Course in Scada at ( Seniors Professional Center ) with Excellent Grade

Course in AutoCAD at ( Seniors Professional Center )

LANGUAGES:

Arabic and English: FluentFrench and Russian: Intermediate.

Page 4: Eng  Mohamed CV-new look

TOOLS AND TECHNOLOGIES

Advanced in operating systems knowledge, MS Office, AutoCAD software, PLC , Scada and Internet Application

SKILLS:

Communicator, Hard worker, Problem Solver, Flexible / Adaptive, Handles Stress Good leadership skills.. Have a team work spirit. Act for change. Strive for results. Cooperate transversally. Commit to customers. Respect company’s values, code of ethics & social charter. Respect of personal data protection charter. Follow the approved quality & HSE policy & requirements.

BUSINESS TRIPS: Traveled to Brescia Italy to do the FAT for serialization machine July 2015.