Eng Ds 4-1773464-4 Solarlok Solutions Catalog 0612

SOLARLOKConnectivity Systems for PV Solutions

As solar becomes an increasingly viable and competitive source

of alternative energy, TE Solar works with you every step of the

way to solve your connectivity challenges. Our proven expertise,

cross-industry innovation and broad range of connectivity

solutions are establishing the intelligent link between the panel

and the gridand driving the future of solar energy.

Building a greener tomorrow

With approximately 7,000 engineers and 11 global design centers,

plus manufacturing facilities in approximately 25 countries, we put

a premium on innovation when it comes to helping companies solve

tough design problems. Talking to us early on in your design cycle

will give you the full bene t of our expertise.

We can help you:

Shorten the design cycle

Reduce costs

Increase reliability

Design for manufacturability

In short, we can help you achieve a sustainable competitive

advantage. Whether its showing you the best existing products,

o ering a value added solution or designing a new product,

our commitment to advanced engineering and world-class

manufacturing delivers innovation that can advance any solar

project. Our Electronic Components segment is a world leader

in passive electronic components, including connectors and

interconnect systems, relays, switches, circuit protection devices,

touchscreens, sensors, and wire and cable. TEs ability to serve

your present and future requirements is realized through the

synergies of a strong R&D program and our expertise in materials

science, product design and process engineering, all supported by

our network of 5000-plus knowledgeable, sales representatives

and customer service personnel.

Early involvement pays o in competition advantage

TE Global Design Centers

1 : Harrisburg, PA : USA2 : Greensboro/Winston-Salem, NC : USA3 : Menlo Park, CA : USA4 : Wilsonville, OR : USA5 : Eatontown, NJ : USA6 : Kawasaki, Japan7 : Bensheim, Germany8 : Shanghai, China9 : Kessel-Lo, Belgium10 : sHertogenbosch, Netherlands11 : Kyungsan, Korea

Solar Manufacturing Facilities

A : Trutnov, Czech RepublicB : Greensboro, NC : USAC : Empalme, MexicoD : Hermosilla, MexicoE : DongGuann, ChinaF : Shanghai, ChinaG : QingDao, China

SOLARLOK Connectivity Systems for PV Solutions

te.com/solar

Catalog 4-1773464-4 | Issue Date 06/2012

Dimensions are in inches and millimeters unless otherwise specifi ed. Values in brackets are standard equivalents. Dimensions are shown

for reference purposes only. Specifi cations subject to change.

USA: 1-800-522-6752 Latin/S. America: +54 (0) 11-4733-2200 France: +33 (0) 1-3420-8686Canada: +1-905-475-6222 Germany: +49 (0) 6251-133-1999 Netherlands: +31 (0) 73-6246-999Mexico: +52 (0) 55-1106-0800 UK: +44 (0) 800-267666 China: +86 (0) 400-820-6015

2

Mechanical, Environmental and Electrical Testing Capabilities

Force-deflection curves are generated to verify that

spring contact properties meet design criteria.

3D X-ray computer tomography provides high

resolution three-dimensional non-destructive

analysis capability.

Contact resistance and temperature rise are measured

and recorded automatically. These parameters help to

establish/verify current carrying capacity, and de-rating

curves. Test samples are isolated to minimize the

influence of external variables such as air movement.

Components/assemblies are exposed to cold, heat,

moisture, and temperature change. Thermal shock

is accomplished with the 2-chamber method.

Environmental chambers operate from -70C to +180C

enabling simulation of real-world conditions.

Slow-motion bending and vibration testing simulates

line movements in the wire, stressing the crimped

termination. Industrial atmospheres are generated

with a gas mixture of SO2, H2S, NO2 and Cl2.


te.com/solar


Dimensions are in inches and millimeters unless otherwise specifi ed.

Values in brackets are standard equivalents. Dimensions are shown



Manufacturing Capabilities

The Trutnov, Czech Republic facility offers a repeatable manufacturing process which

produces a 100% automatically inspected and electrically tested junction box. For quality

control purposes, each junction jox is laser etched with a unique serial number.

Our electrical test equipment has four independent heads to automatically test each

connection rail and diode in the popular four rail junction box. Assembly equipment

automatically verifies the production of the cable assemblies and attachment to the junction

box. The true position of the contact in the mating coupler housing and proper torque of

the screw nut are some of the critical process checks made to each unit. A vision system

is incorporated into the junction box assembly equipment. Polarization and molded

features are inspected by the same vision system to contribute to the production of

a quality product and a repeatable manufacturing process.

The SOLARLOK product is currently manufactured in Europe, Asia and the USA.

TE manufactures the SOLARLOK product line on state of the art manufacturing

equipment.

TE Manufacturing Facility in Trutnov, Czech Republic

3


te.com/solar





4

Junction Box Variable wiring options

Simple, fast and cost-effective assembly

Flat, low profile design

High current carrying capacity

Good thermal balance

Connectorized or direct wire configurations

Up to four outputs possible

Up to six internal rails

Customer-specific solutions

TV and UL approved

Cable Couplers Simple on-site processing

Mating safety provided by keyed housings

Semi-automatic assembly capability possible

Multiple plugging and unplugging cycles

Accomodates solar cable with different insula tion diameters

High current carrying capacity

Wide temperature operating range

TV and UL approved

Solar Cable More than 50 years of expected lifetime

(acc. to TUV 2PfG1169/08.2007)

More than 50% higher insulation resistance provides a superior safety

Can withstand the lowest temperature in its range (-60C at fixed installation)

Nominal Voltage: 1800/3000 V AC 2600 V DC

Dual wall insulation

Electron beam cross-linked

Excellent resistance to U.V., water, ozone, fluids, salt, general weathering

Excellent resistance to abrasion

Halogen free, flame retardant, low toxicity

Excellent flexibility and stripping performance

Temperature Rating : 40C up to +125C

System Features

The SOLARLOK Product Concept

Market expansion of the formerly regulated

energy supply sector, increased global

environmental awareness and governments

committing themselves to more stringent

environmental targets have opened up new

opportunities for the photovoltaic industry.

Having served a niche market in the past, the

photovoltaics industry now has the opportunity

to move into mass production, realizing

economies of scale and gaining a greater

market share of the worlds energy mix.

TE has contributed to the establishment of this

environmentally-friendly tech nology with the

introduction of its SOLARLOK connector system.

The SOLARLOK connector system delivers a

flexible system solution for easy and reliable

interconnections from photovoltaic modules to

the DC converter. The entire system concept is

based on cost-effective and reli able processing of

individual interconnection system components.

This significantly reduces installation costs of

the solar energy system.

The junction box concept is based on a flexible,

open system structure, which allows serial as well

as parallel interconnection via direct wire connect

or separable connectors. Within the junc tion box,

up to six termination places rails are available for

photovoltaic foil connection. If required by the

customer, the junction box can be delivered

pre-configured with diodes, jumpers, plug

connectors, and solar cable pigtails.

The male and female cable couplers were

designed for high voltage and high current-

carrying capa city in addition to the well-

established IP 67 sealing require ment in the

photovoltaic industry. Mating safety is provided

by polarity keyed housings, fully shrouded

contacts, reliable high cycle life, and a squeeze

to release connection system. In addition, a wide

temperature range and fulfill ment of worldwide

standards for photovoltaic connection systems

complement the robust product specification.


te.com/solar






Table of Contents

Large Junction Box : Serial Interconnection........................................................................... 8

5-Rail Junction Box : Serial Interconnection .......................................................................... 9

Automated Junction Box : Serial Interconnection ............................................................. 10

Z-Rail Junction Box : Serial Interconnection .......................................................................... 11

Medium Junction Box : Serial Interconnection ..................................................................... 12

Medium Junction Box : Serial Interconnection: Special Versions ..................................13

Breeze Junction Box : Serial Interconnection .......................................................................14

Small 3-Rail Junction Box : Serial Interconnection .............................................................15

Decentralized 2-Rail Junction Box : Serial Interconnection ............................................16

2-Rail Micro Junction Box ............................................................................................................. 17

1-Rail Junction Box (Potting, No-Potting Version)..............................................................18

Building Integrated PV : Wing Edge Junction Box .............................................................19

Building Integrated PV : Straddle Edge Junction Box ..................................................... 20

HM: High Tack Metallized Polyester Labels ............................................................................21

HW: High Tack White Polyester Labels ..................................................................................22

Grounding System : Grounding Bolt ........................................................................................23

Grounding System : Grounding Clip ........................................................................................24

Cable Couplers : Standard Line .................................................................................................25

Cable Couplers : Slim Line ...........................................................................................................26

Contacts .............................................................................................................................................27

PV4 Connector .................................................................................................................................28

Accessories ........................................................................................................................................29

DC Converter Receptacle ........................................................................................................... 30

Solar Cables .......................................................................................................................................31

Wiring Example with Extension Cables .................................................................................33

Interconnection Examples ...........................................................................................................34

5-String Combiner Box .................................................................................................................36

Application Tooling ................................................................................................................. 37-38

Assembly and Installation Guidelines ..............................................................................39-42

Crystalline

Thin-Film

BIPV

Labels

Grounding System

Connectors

Solar Cable

Combiner Box

Tooling

Guidelines

5

Junction Box

Female Cable Coupler

Male Cable Coupler

Solar Wire


te.com/solar





8

Technical DataMaterialsSocket and Pin Contacts : CuZn

Housing : PPE+PS, weatherproof against UV radiation ozone

Contact Rail : Bright tin over copper

Electrical Features

Withstanding Voltage : 1000 V DC

Current Rating : Up to 25 A

Protection Class : ||

Mechanical Features

Temperature Range : -40C to + 105C

Wire Size Range : Up to 12 AWG, 4 mm2

Protection Degree : IP 65, closed

Standards

TV approved to IEC 61215 ed. 2 approved

Large Junction Box : Serial Interconnection

Junction Box with Mounted Cable and Connectors

Part Number Contact Rails Diodes

Rated Current(IEC 61215, Edition 2)

(Ampere)Cable Length

(mm)Wire Size

(mm2) AWG

1740300-2 6 5 6.0 1,000 4.0 12

1987294-2 6 5 8.5 1,000 4.0 12

1987254-2 6 5 13.0 1,000 4.0 12

1740077-1 4 3 6.0 1,000 4.0 12

1740077-3 4 3 8.5 1,000 4.0 12

on request 4 3 13.0 1,000 4.0 12

Junction Box with Connector Outlet



(Ampere)

3-1394723-0 6 5 6.0

6-1394735-5 6 5 8.5

6-1394723-4 6 5 13.0

2-1394723-4 4 3 6.0

on request 4 3 8.5

5-1394723-3 4 3 13.0

Top View Side View

H : 25 mm(with lid)

W : 150 mm

D :

155

mm

Standard mounting on the panel with silicone glue (approved types see application specification). Optional with double-sided adhesive tape (specifications of the adhesive tape can be found in the datasheets of the manufacturer)


te.com/solar









Electrical Features




Mechanical Features




Standards

UL approved


5-Rail Junction Box : Serial Interconnection

D :

135

mm

W : 140 mm

Top View Side View

H : 22.5 mm


Part Number ContactRails Diodes


(Ampere)

on request 5 4 8.5

on request 5 4 13.0


Part NumberContact

Rails Diodes



(mm)Wire Size

(mm2) AWG

1987858-3 5 4 8.5 1,000 4.0 12

1987982-3 5 4 13.0 1,000 4.0 12

9


te.com/solar





10

Technical DataMaterialsHousing : PPE+PS,weatherproof against UV radiation ozone

Electrical Features



Mechanical Features




Standards

UL approved

TV approved

Part Number

x-2120098-1-y

Automated Junction Box : Serial Interconnection

Top View Side View

H : 25 mmW : 70 mm

D :

145

mm


te.com/solar






Technical DataMaterialsHousing : PPE+PS,weatherproof against UV radiation ozone

Contact Rail : Tin plated copper alloy

Electrical Features

Withstanding Voltage : 1000 V (TV) / 600 V (UL)


Mechanical Features


Wire Size Range : 12 AWG, 4 mm2


Standards

UL approved

TV approved

Part Numbers

Clamp Version : y-2152080-x

Solder Version : y-2152099-x

Weld Version : y-2152177-x

Z-Rail Junction Box: Serial Interconnection

D :

110

mm

W : 115 mm

Top View Side View

H : 23 mm

11

Clamp Version

Weldes Version

Soldered Version Potted


te.com/solar





12




Lid : Impact resistant P.C.

Electrical Features




Mechanical Features


Wire Size Range : Up to 12 AWG, 4mm2


Standards

UL approved


Medium Junction Box : Serial Interconnection

H : 22.5 mmW : 115 mm

D :

110

mm




(Ampere)

1987003-3 4 3 6.0

1740700-1 4 3 9.3

1740972-1 4 3 13.0

Special VersionPart Number Contact Rails Diodes Withstanding Voltage

x-2120634-x 4 3 1000 V (UL & TV)





(mm)Wire Size

(mm2) AWG

1987002-4 4 3 6.0 1,000 4.0 12

1740699-6 4 3 9.3 1,000 4.0 12

1740971-2 4 3 13.0 1,000 4.0 12

Top View Side View


te.com/solar






Technical Data

Medium Junction Box : Serial Interconnection : Special Versions

Inside Style

Part NumberContact

Rails Diodes


(Ampere)

Cable Length (mm)

Wire SizeComments(mm2) AWG

1740657-8 4 3 8.5 1,000 4.0 12 with mounted cable

1-1740657-2 4 3 9.5 1,000 4.0 12 with mounted cable

H : 22.5 mmW : 115 mm

D :

135

mm

Top View Side View

H : 22.5 mmW : 115 mm

D :

135

mm

Top View Side View


Part NumberContact

Rails Diodes


(Ampere)

Cable Length(mm)

Wire Size(mm2) AWG Comments

3-1740699-9 4 3 9.3 1,000 4.0 12 Male contact (neutral)right, left closed

3-1740699-8 4 3 9.3 1,000 4.0 12 Female contact (neutral)left, right closed

1987994-1 4 3 13.0 1,000 4.0 12 Male contact (neutral)right, left closed

1987995-1 4 3 13.0 1,000 4.0 12 Female contact (neutral)left, right closed

13


te.com/solar





14

Technical DataMaterialsSocket and Pin Contacts : Copper alloy with tin plated

Housing : R3 (UL94-V0/5VA, f1)

Lid : R2 (UL94-V0/5VA, f1)

Contact Rail : Copper alloy with tin plated

Electrical Features

Withstanding Voltage : 1000 V DC (TV)

600 V DC (UL)

Current Rating : 11 A (bypass mode)


Mechanical Features

Temperature Range : -40C to +90C



Foil Tab Connection : Soldering

Standards

UL pending

TV pending

Breeze Junction Box : Serial Interconnection





(mm)Wire Size

(mm2) AWG

1971867-1 4 3 11 900 4.0 12

Top View Side View

H : 19.3 mmW : 85 mm

D :

62

mm


te.com/solar









Lid : Impact resistant P.C.

Electrical Features




Mechanical Features


Wire Size Range : Up to 12 AWG, 4mm2


Standards

UL approved


Small 3-Rail Junction Box : Serial Interconnection




(Ampere)

1418867-6 3 2 6.5

1987459-1 3 2 10.5

1987771-1 3 2 14.0

D :

138

mm

H : 22 mmW : 90 mm

Top View Side View





(mm)Wire Size

(mm2) AWG

1740425-5 3 2 6.5 1,000 4.0 12

1987252-6 3 2 10.5 1,000 4.0 12

1987252-1 3 2 14.0 1,000 4.0 12

15


te.com/solar





16

Technical Data

Feature & Benefits

MaterialsHousing : PPE+PS,weatherproof against UV radiation ozone

Electrical FeaturesCurrent Rating : 9 A, 11 A


Mechanical Features




Standards

UL approved

TV approved to IEC 61215 ed. 2 approved(VDE 0126-5)

Low profile, only 18.5 mm

Separated diodes in separate boxes

Proven solderless spring clip termination technique

2 position style for lay out flexibility

Decentralized position saves on the length of connecting cable

Decentralized position saves on the length of X-connect

Connectorized style (mates with Slim Line Connector System)

Decentralized 2-Rail Junction Box : Serial Interconnection

Product O ering, 9 APart Numbers Description

2134417-1 2 Rail Junction Box : PLUS

2134417-2 2 Rail Junction Box : CENTER

2134417-3 2 Rail Junction Box : MINUS

Product O ering, 11 APart Numbers Description

1-2134417-1 2 Rail Junction Box : PLUS

1-2134417-2 2 Rail Junction Box : CENTER

1-2134417-3 2 Rail Junction Box : MINUS

18.518.518.5

48.048.048.0

90.0 84.5

94.590.094.5

84.5


te.com/solar






2-Rail Micro Junction Box

Technical DataMaterialsHousing : PPE+PS,weatherproof against UV radiation ozone, UL F1-rated

Electrical Features


Current Rating : Up to 7.5 A Rated for 600 V (UL) and 1000 V (TV) system voltages

Mechanical Features


Wire Size Range : 4 mm2, 2.5 mm2, Dual Rated


Standards

UL approved

TV approved to IEC 61215 ed. 2 approvedD

: 74

.15

mm

H : 15.7 mmW : 66.9 mm

Top View Side View

17

2-Rail Micro Junction Box, Part Number

Part Number Rate Current Rated Voltage Cable Length

(mm)Wire Size

(mm2) AWG

2152131-1 7.5 A 150 V 440 4.0 12


te.com/solar





18

Technical DataMaterialsHousing : PA 66 (polyamide 66)

Cover : PPE + PS

Contact Rail: : Copper alloy

Electrical Features

Withstanding Voltage : 1000 V (TV), 600 V (UL)


Mechanical Features


Wire Size Range : 2.5 mm2 (AWG 14) or 4.0 mm2 (AWG 12)

Protection Degree : IP 20, IP 67

Standards

UL approved


1-Rail Junction Box

H : 13 mmW : 30 mm

D :

58 m

m

Top View Side View

H : 19 mmW : 32 mm

D :

71.5

mm

Top View Side View

Potting Version Cable Length

(mm)Wire Size

Part Number Description (mm2) AWG

1971645-1 Assembly, plus, no diode 250 4.0 12

1971645-2 Assembly, minus, no diode 250 4.0 12

1971645-3 Assembly, plus, with blocking diode 250 4.0 12

No-Potting Version Cable Length

(mm)Wire Size

Part Number Description (mm2) AWG

1971676-1 Assembly, plus, no diode, 4 mm2 (12 AWG) 250 4.0 12

1971676-2 Assembly, minus, no diode, 4 mm2 (12 AWG) 250 4.0 12

1971676-3 Assembly, plus, with blocking diode, 4 mm2 (12 AWG) 250 4.0 12


te.com/solar






19

Technical DataMaterialsContact Plate : CuFe

Pin Contact : Silver plated CuSn

Housing : High temperature resin

Electrical Features


Mechanical Features


Wire Size Range : Up to 12 AWG, 4.0 mm2

Protection Degree : IP 67

Standards

TV approved

Specifications

Product Specifications : 108-94114

Application Specifications: : 114-18896

Building Integrated PV : Wing Edge Junction Box

Wing Edge Junction Box

Part Number Diodes


(Ampere) Connection Type

1-1987293-4 1 12 with slim line connector system page 26 or blind cap (2120413-1)

Note: The cable assemblies for wing-edge junction box are available upon request.

Top View Side View

12.5

15.5

8.5

14.0

Feature & Benefits Suitable solution for

automatic lamination

For crystalline applications

Connectorized junction box termination allows for easy and reliable field installations

No potting required

No silicon glue needed

105.8

NOTE : This product is not permitted for use in the USA.


te.com/solar





20

Technical DataMaterialsHousing : PPE+PS,weatherproof against UV radiation ozone, UV F1 rated material

Electrical Features

Rated Current : 11A (crystalline) and 3A (thin film)

Voltage : 1000V DC

Mechanical Features


Protection Level : IP 67

Application Cable : 2.5 mm2 and 4.0 mm2

Standards

TV approved

Specifications

Product Specifications : 108-106018

Application Specifications: : 114-106001

Building Integrated PV : Straddle Edge Junction Box

Straddle Edge Junction Box

Part Number Description Type Termination Diode

Rated Current(IEC 61215, ed.2)

(Ampere)Connection

Type

1971569-1

Straddle Edge Junction Box

Crystalline Potting (a) 1 11

With Socket Connector

1971569-2 Thin-film Potting (a) 1 3

1971569-3 Crystalline Clamping 1 11

1971569-4 Thin-film Clamping 1 3

(a) Connection foil by soldering and potting. Refer to application specification for potting material information. Note: The cable assemblies for straddle edge junction boxes are available upon request

Socket Connector & AccessoriesPart Number Description Keying Cable Outer Diameter Wire Type

1971131-1 Socket Connector Plus 6.1 - 6.5 mm See Application Specification

1971131-2 Socket Connector Minus 6.1 - 6.5 mm See Application Specification

1971131-3 Socket Connector Plus 5.8 - 6.1 mm See Application Specification

1971131-4 Socket Connector Minus 5.8 - 6.1 mm See Application Specification

1971133-1 End Cap 1971638-1 Dust Cap

131

37.2

52.752.7

10

10

1010

10Features & Benefits For both crystalline and thin film

applications

Lowest profile in its class, with a 10 mm width on connector and box

Modular design can meet various size module application requirements

Connectorized junction box termination allows for easy and reliable field installations


te.com/solar






21

HM : High tack metallized polyester labels (for indoor and outdoor applications)

Technical DataApplications

Racks and Panels (including back of solar panels)

Electronic device and equipment labeling

General purpose label applications

Temperature Range

Operating Temperature : 40C to +150C (40F to +302F)

Minimum Application Temperature : 10C (50F)

Specifications and Certifications

TE Technical Data Sheet : TTDS-075: UL 969, File MH17292

Printer Information

TE Printer : TE3124 (Thermal transfer): T312 (Thermal transfer)

TE Ribbons : 1330-0607

NOTE : For reliable print performance and durability, use with Tyco Electronics 1330-0607 series ribbon.

HM is a thermal transfer printable metalized polyester film with a high tack permanent acrylic

adhesive. The labels are designed for application to rough surfaces or where increased adhesion

is required. The high tack adhesion of HM will bond to most demanding surfaces, including

textured and contoured surfaces.

Metallized

Pack Size

Label Height (mm)

Label Width (mm)

Product Family

Part Number ExampleHM - 127508 - 10 - 8A

Product Order Pack. Qty. # ACLabel Width Label Height Horizontal Repeat Vertical Repeat Web Width

(mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches)

HM-064064-25-8A 25000 12 6.4 0.25 6.4 0.25 6.4 0.25 9.5 0.375 82.2 3.24

HM-089047-10-8A 10000 5 8.9 0.35 4.7 0.186 11.4 0.45 7.9 0.313 60.6 2.386

HM-095080-25-8A 25000 5 9.5 0.375 8 0.315 12.2 0.48 12.7 0.5 64.3 2.531

HM-095095-10-8A 10000 7 9.5 0.375 9.5 0.375 11.1 0.437 12.7 0.5 82.1 3.23

HM-127111-10-8A 10000 5 12.7 0.5 11.1 0.437 16.8 0.662 14.3 0.563 86 3.38

HM-127127-10-8A 10000 5 12.7 0.5 12.7 0.5 15.9 0.625 15.9 0.625 82.6 3.25

HM-191064-10-8A 10000 4 19.1 0.75 6.4 0.25 21.6 0.85 9.5 0.375 89.9 3.54

HM-191114-15-8A 15000 3 19.1 0.75 11.4 0.45 22.2 0.875 14.7 0.579 69.5 2.736

HM-254064-10-8A 10000 3 25.4 1 6.4 0.25 27.9 1.1 9.5 0.375 87.3 3.436

HM-254127-10-8A 10000 3 25.4 1 12.7 0.5 27.9 1.1 16.9 0.666 87.4 3.44

HM-254254-10-8A 10000 3 25.4 1 25.4 1 27.9 1.1 28.6 1.125 87.4 3.44

HM-318097-10-8A 10000 1 31.8 1.25 9.7 0.38 -- -- 12.7 0.5 37.8 1.488

HM-381064-10-8A 10000 1 38.1 1.5 6.4 0.25 -- -- 9.5 0.375 44.5 1.75

HM-381127-5-8A 5000 2 38.1 1.5 12.7 0.5 44.2 1.738 15.9 0.625 88.2 3.472

HM-381191-5-8A 5000 2 38.1 1.5 19.1 0.75 43.2 1.7 22.2 0.875 87.6 3.45

HM-381381-2.5-8A 2500 2 38.1 1.5 38.1 1.5 44.5 1.75 40.8 1.607 88.9 3.5

HM-381635-5-8A 5000 2 38.1 1.5 63.5 2.5 40.6 1.6 66.7 2.625 84.7 3.338

HM-445064-10-8A 10000 1 44.5 1.75 6.4 0.25 -- -- 9.5 0.375 50.4 1.986

HM-445445-2-8A 2000 1 44.5 1.75 44.5 1.75 -- -- 47.6 1.875 50.4 1.986

HM-508064-10-8A 10000 1 50.8 2 6.4 0.25 -- -- 9.5 0.375 56.9 2.24

HM-508127-5-8A 5000 1 50.8 2 12.7 0.5 -- -- 15.9 0.625 56.9 2.24

HM-508254-5-8A 5000 1 50.8 2 25.4 1 -- -- 28.6 1.125 57.2 2.25

HM-508318-2.5-8A 2500 1 50.8 2 31.8 1.25 -- -- 34.9 1.375 56.9 2.24

HM-508508-3-8A 3000 1 50.8 2 50.8 2 -- -- 54.6 2.15 54 2.13

HM-762381-2.5-8A 2500 1 76.2 3 38.1 1.5 -- -- 41.3 1.625 82.3 3.24

HM-762508-2.5-8A 2500 1 76.2 3 50.8 2 -- -- 54 2.125 82.6 3.24

HM-101508-2.5-8A 2500 1 101.6 4 50.8 2 -- -- 54.6 2.15 104.1 4.1

HM-101635-2.5-8A 2500 1 101.6 4 63.5 2.5 -- -- 66.7 2.625 107.7 4.24

HM-101101-1.3-8A 1300 1 101.6 4 101.6 4 -- -- 104.8 4.125 104.1 4.1


te.com/solar





22

HW : High Tack White Polyester Labels

HW is a white thermal transfer printable polyester film with a high tack - permanent acrylic

adhesive,designed for application to multiple surface types where increased adhesion

is required. The high tack adhesion of HW will bond to most demanding surfaces, including

textured and contoured surfaces.

Technical DataApplications

Enclosures, Racks and Panels (including back of solar panels)

Electronic device and equipment labeling

General purpose label applications

Temperature RangeOperating Temperature : 40C to +150C (40F to +302F)

Minimum Application Temperature : 10C (50F)

Specifications and CertificationsTE Technical Data Sheet : TTDS-076: UL 969, File MH17292

Printer InformationTE Printer : TE3124 (Thermal transfer): T312 (Thermal transfer)

TE Ribbons : 1330-0607

NOTE : For reliable print performance and durability, use with Tyco Electronics 1330-0607 series ribbon.

Product Order Pack. Qty. # ACLabel Width Label Height Horizontal Repeat Vertical Repeat Web Width

(mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches)

HW-064064-25-9 25000 12 6.4 0.250 6.4 0.250 6.4 0.25 9.5 0.375 82.2 3.240

HW-080080-10-9 10000 8 8.0 0.315 8.0 0.315 9.9 0.39 13.3 0.525 83.3 3.280

HW-089047-10-9 10000 5 8.9 0.350 4.7 0.185 11.4 0.45 7.9 0.313 60.6 2.386

HW-095095-10-9 10000 7 9.5 0.375 9.5 0.375 11.1 0.437 12.7 0.500 64.3 2.531

HW-114040-25-9 25000 6 11.4 0.450 4.0 0.158 11.4 0.45 7.1 0.282 74.6 2.936

HW-127032-10-9 10000 5 12.7 0.500 3.2 0.126 19.1 0.75 6.4 0.250 94.6 3.736

HW-127064-10-9 10000 6 12.7 0.500 6.4 0.252 15.2 0.6 9.5 0.375 95.3 3.750

HW-127111-10-9 10000 5 12.7 0.500 11.1 0.437 16.8 0.662 14.3 0.563 86.0 3.380

HW-127127-10-9 10000 5 12.7 0.500 12.7 0.500 15.9 0.625 15.9 0.625 82.6 3.250

HW-165051-25-9 25000 4 16.5 0.650 5.1 0.200 17.8 0.7 8.3 0.325 75.8 2.990

HW-171171-10-9 10000 5 17.1 0.674 17.1 0.674 19.7 0.774 20.3 0.800 101.8 4.006

HW-178095-10-9 10000 4 17.8 0.700 9.5 0.375 19.1 0.75 12.7 0.500 80.9 3.190

HW-191064-10-6 10000 4 19.1 0.750 6.4 0.250 21.6 0.85 9.5 0.375 89.9 3.540

HW-191064-10-9 10000 4 19.1 0.750 6.4 0.250 21.6 0.85 9.5 0.375 89.9 3.540

HW-203127-10-9 10000 4 20.3 0.800 12.7 0.500 22.9 0.9 15.9 0.625 94.6 3.730

HW-229064-10-9 10000 3 22.9 0.900 6.4 0.250 28.6 1.125 9.5 0.375 86.0 3.390

HW-254064-10-9 10000 3 25.4 1.000 6.4 0.250 27.9 1.1 9.5 0.375 95.3 3.750

HW-254097-10-9 10000 3 25.4 1.000 9.7 0.380 27.9 1.1 12.7 0.500 87.4 3.440

HW-254127-10-4 10000 3 25.4 1.000 12.7 0.500 27.9 1.1 16.9 0.666 87.4 3.440

HW-254254-10-9 10000 3 25.4 1.000 25.4 1.000 27.9 1.1 28.6 1.125 87.4 3.440

HW-318064-10-9 10000 1 31.8 1.250 6.4 0.250 -- -- 9.5 0.375 37.9 1.490

HW-318097-10-9 10000 1 31.8 1.250 9.7 0.380 -- - 12.7 0.500 37.9 1.490

HW-381064-10-9 10000 1 38.1 1.500 6.4 0.250 -- -- 9.5 0.375 44.5 1.750

HW-381127-5-9 5000 2 38.1 1.500 12.7 0.500 44.2 1.74 15.9 0.625 88.2 3.470

HW-381191-5-9 5000 2 38.1 1.500 19.1 0.750 43.2 1.7 22.2 0.875 87.6 3.450

HW-445102-5-9 5000 1 44.5 1.750 10.2 0.400 -- -- 12.7 0.500 50.4 1.986

HW-478175-5-9 5000 1 47.8 1.880 17.5 0.690 -- -- 24.4 0.962 66.0 2.600

HW-508064-10-9 10000 1 50.8 2.000 6.4 0.250 -- -- 9.5 0.375 56.9 2.240

HW-508095-5-9 5000 1 50.8 2.000 9.5 0.375 -- -- 12.7 0.500 57.2 2.250

HW-508127-5-9 5000 1 50.8 2.000 12.7 0.500 -- -- 15.9 0.625 56.9 2.240

HW-508254-5-9 5000 1 50.8 2.000 25.4 1.000 -- -- 28.6 1.125 57.2 2.250

HW-508318-2.5-9 2500 1 50.8 2.000 31.8 1.250 -- -- 34.9 1.375 56.9 2.240

HW-523841-1.5-9 1500 1 52.3 2.060 84.1 3.310 -- -- 88.9 3.500 58.2 2.290

HW-699191-5-9 5000 1 69.9 2.750 19.1 0.750 -- -- 23.3 0.917 76.2 3.000

HW-699254-5-9 5000 1 69.9 2.750 25.4 1.000 -- -- 28.6 1.125 76.2 3.000

HW-762127-1-9 1000 1 76.2 3.000 127.0 5.000 -- -- 129.5 5.100 79.4 3.130

HW-762254-5-9 5000 1 76.2 3.000 25.4 1.000 -- -- 28.6 1.125 82.3 3.240

HW-762508-2.5-9 2500 1 76.2 3.000 50.8 2.000 -- -- 54.0 2.125 82.6 3.240

Note : Label can be flood-coated to meet any color in the PMS book. Inquire with TE customer service.

White

Pack Size

Label Height (mm)

Label Width (mm)

Product Family

Part Number ExampleHW - 127508 - 10 - 9


te.com/solar






23

Grounding System : Grounding Bolt

Technical Data

Features & Benefits Rugged and compact hex bolt design

made from stainless steel.

Quick and easy mounting procedures.

Bottom edge feature cuts through the annodized aluminum surface when securing the hex bolt to the module frame.

Standard tooling can be used with the hex nuts.

MaterialsConnector & Hardware : Stainless Steel (Passivated)

Electrical FeaturesShort Term Current Test (UL 467) : 6 AWG = 1530A (6 seconds): 8 AWG = 1180A (4 seconds): 10 AWG = 750A (4 seconds): 12 AWG = 470A (4 seconds)

Mechanical FeaturesSecurness Test (ul 486A-B): 6 AWG = 18lbs (30 minutes): 8 AWG = 8lbs (30 minutes): 10 AWG = 5lbs (30 minutes): 12 AWG = 5lbs (30 minutes)

Pull out Test (ul 486A-B): 6 AWG = 100lbs (1 minute) : 8 AWG = 90lbs (1 minute) : 10 AWG = 80lbs (1 minute) : 12 AWG = 70lbs (1 minute)

Application ToolingFlex socket wrench or wrenches

StandardsUl 467 listed

UL File #E69905

A requirement for UL 1703 solar panel listing

CSA C22.2 No. 41-07

Part Number Description Thread Dim A Package Quantity

2058729-1 6-12 AWG #8-32 UNC .380 500

2106831-1 Long Shank 6-12 AWG #10-32 UNF .700 100

*Instruction Sheet : 408-10262

Product O ering

Dimensions

Top View Bottom ViewSide View

A

Edge Features


te.com/solar





24

Features & Benefits

Technical Data

Product comes as an assembled kit that includes an attachment screw

Contact design provides 4 points of contact to the ground wire for high reliability

Product is easy to install with simple tools that are readily available

Removal of the installed ground wire requires a screwdriver, this meeting the tooled extration requirements

RoHS compliant

Grounding System : Grounding Clip

MaterialsHousing : Durable PBT 30% glass filled polyester. Material is outdoor & UV ratedContact : High conductivity, copper

Electrical FeaturesMeets the tough requirements of photovoltaic grounding applications and the 2008 National Electrical Code.

Mechanical FeaturesMeets the tough requirements for grounding applications for solid copper wire.12 AWG applications will withstand 70lbs pull while the 10 AWG applications will withstand 80lbs pull

Application ToolingNo special tooling is required -- only flathead screwdrivers and channel lock pliers (optional)

StandardsUl 467 listed

UL File #E69905

A requirement for UL 1703 solar panel listing

CSA C22.2 No. 41-07

Part Number Screw Nut Package Quantity Wire Size

1954381-1 #10-32 Thread Cutting None 100 10-12 AWG

1954381-2 #8-32 Pan Head #8-32 100 10-12 AWG

1954381-3 #8-32 Pan Head #8-32 Star Washer Nut 100 10-12 AWG

1954381-4 #8-32 Long Shark none 100 10-12 AWG

1954381-5 #10-32 Thread Cutting none 100 6 mm2

*Instruction Sheet : 408-10160, Product Specifications: 108-2312

Product O ering

. . . Ready. . . Push. . .Insert . . .

3 Easy Steps to Ground Your PV System

Dimensions

#8-32 Pan Head Screw

24.516.8

94.5

32.5

10.0

#10-32 Thread Cutting Screw

Closed Position


te.com/solar






25

Technical Data

Technical DataElectrical FeaturesCurrent Rating : 25 AWithstanding Voltage : 1000 V DCContact Resistance : 1 m typical

Mechanical FeaturesTemperature Range : -40C to + 115CDimensions : Diameter 18 mm (.71 inch)Protection Degree : IP 67, matedContact Finish : Silver plated

StandardsUL approvedTV approved

Cable Coupler : Standard Line

Female Cable Coupler (kit with screw-machined contact)

Gen 3 Seal Part Number Gen 2 Seal Part Number

Cable Outer Diameter 6.0 mm to 8.0 mm


Wire SizeKeying Package Quantitymm2 AWG

1394462-1 4-1394462-6 2.5 14 Plus 100

1394462-3 4-1394462-8 4.0 12 Plus 100

5-1394462-5 6-1394462-3 6.0 10 Plus 100

1394462-2 4-1394462-7 2.5 14 Minus 100

1394462-4 4-1394462-9 4.0 12 Minus 100

5-1394462-6 6-1394462-4 6.0 10 Minus 100

Male Cable Coupler (kit with screw-machined contact)

Gen 3 Seal Part Number Gen 2 Seal Part Number



Wire SizeKeying Package Quantitymm2 AWG

1394461-1 1394461-7 2.5 14 Plus 100

1394461-3 7-1394461-0 4.0 12 Plus 100

6-1394461-5 7-1394461-3 6.0 10 Plus 100

1394461-2 1394461-8 2.5 14 Minus 100

1394461-4 7-1394461-1 4.0 12 Minus 100

6-1394461-6 7-1394461-4 6.0 10 Minus 100

6-1394461-1 6-1394461-3 2.5 14 Neutral 100

6-1394461-2 7-1394461-2 4.0 12 Neutral 100

6-1394461-4 7-1394461-5 6.0 10 Neutral 100

Electrical FeaturesCurrent Rating : 25 AWithstanding Voltage : 1000 V DCContact Resistance : 1 m typical

Mechanical FeaturesTemperature Range : -40C to + 115CDimensions : Diameter 18 mm (.71 inch)Protection Degree : IP 67, matedContact Finish : Silver plated


SpecificationsApplication Specification : 114-18488Installation Manual : 1654276-1 (Europe),2-1773458-2 (US)


te.com/solar





26

Cable Coupler : Slim Line

Technical Data

Technical Data


Mechanical FeaturesTemperature Range : -40C to + 115C Dimensions : Diameter 12.5 mm (.49 inch)Protection Degree : IP 67, matedContact Finish : Silver plated

Standards UL approvedTV approved


Mechanical FeaturesTemperature Range : -40C to + 115CDimensions : Diameter 12.5 mm (.49 inch)Protection Degree : IP 67, matedContact Finish : Silver plated


Female Cable Coupler (kit with screw-machined contact)

Part NumberWire Size

KeyingCable Outer

DiameterPackage Quantity Standardmm2 AWG

1987559-1 2.5 14 Plus > 6.3 to 6.8 mm 100 TV & UL

1987559-2 2.5 14 Minus > 6.3 to 6.8 mm 100 TV & UL

1-1987559-1 4.0 12 Plus 5.8 to 6.3 mm 100 TV & UL

1-1987559-2 4.0 12 Minus 5.8 to 6.3 mm 100 TV & UL

Male Cable Coupler (kit with screw-machined contact)


KeyingCable Outer

DiameterPackage Quantity Standardmm2 AWG

1987558-1/-4 2.5 14 Plus > 6.3 to 6.8 mm 100 TV/UL

1987558-2/-5 2.5 14 Minus > 6.3 to 6.8 mm 100 TV/UL

1987558-3/-6 2.5 14 Neutral > 6.3 to 6.8 mm 100 TV/UL

1-1987558-1/-4 4.0 12 Plus 5.8 to 6.3 mm 100 TV/UL

1-1987558-2/-5 4.0 12 Minus 5.8 to 6.3 mm 100 TV/UL

1-1987558-3/-6 4.0 12 Neutral 5.8 to 6.3 mm 100 TV/UL

Male Cable Coupler (without contact : only housing and sealing)

Part Number Keying Cable Outer DiameterPackage Quantity Standard

1987286-1/-4 Plus > 6.3 to 6.8 mm 100 TV/UL

1987286-2/-5 Minus > 6.3 to 6.8 mm 100 TV/UL

1987286-3/-6 Neutral > 6.3 to 6.8 mm 100 TV/UL

2120346-1/-4 Plus 5.8 to 6.3 mm 100 TV/UL

2120346-2/-5 Minus 5.8 to 6.3 mm 100 TV/UL

2120346-3/-6 Neutral 5.8 to 6.3 mm 100 TV/UL

Female Cable Coupler (without contact : only housing and sealing)

Part Number Keying Cable Outer DiameterPackage Quantity Standard

1987287-1 Plus > 6.3 to 6.8 mm 100 TV & UL

1987287-2 Minus > 6.3 to 6.8 mm 100 TV & UL

2120347-1 Plus 5.8 to 6.3 mm 100 TV & UL

2120347-2 Minus 5.8 to 6.3 mm 100 TV & UL

SpecificationsProduct Specification : 108-94205-1Application Specification : 114-18952-1


te.com/solar






27

Replacement Contacts

Male Contacts (Screw-Machined)Material : Copper alloy, silver plated

Part Number Wire Size (mm2) Wire Size (AWG) Package Quantity

1987280-1 2.5 AWG 14 100

1987280-2 4.0 AWG 12 100

1987280-4 6.0 AWG 10 100

26.75

4.1

Technical Data Female Contacts (Screw-Machined)Material : Copper alloy, silver plated

Part Number Wire Size (mm2) Wire Size (AWG) Package Quantity

1987281-1 2.5 AWG 14 100

1987281-2 4.0 AWG 12 100

1987281-3 6.0 AWG 10 100

24.5

4.1

MaterialsContact : Silver plated, copper alloy

Electrical Features



te.com/solar





28

Technical DataMaterialsHousing : PC

Contact : Tin copper

Contact Finish : Tin plated

Electrical Features


Current Rating : Up to 35 A for 4.0 mm2

Up to 40 A for 6.0 mm2

Contact Resistance : 0.25 m typical

Mechanical Features

Dimensions : Diameter 18.7 mm (.74 inch)

Protection Degree : IP 68, mated

Standards

UL pending

TV pending

PV4 Connector

Cable Coupler : PV4 (Female and Male Cable Coupler)

Gen 4 Seal P/N Gen 2 Seal P/N



Wire SizeCoupler Package Quantitymm2 AWG

1971861-1 1971861-2 4.0; 6.0 12; 10 Male 100

1971862-1 1971862-2 4.0; 6.0 12; 10 Female 100

H : 18.7 mmW : 24.5 mm

D :

62.

5 m

m

Female Male


te.com/solar






Accessories

Male Housing : with strap Male Housing : no strap

Frame Mount Connector

Female Housing : with strap Female Housing : no strap

29

Parallel Interconnection using T-Branch Connector(Male-to-Male)

Part Number Keying Package Quantity

1534611-1 Plus 20

1534611-2 Minus 20

Parallel Interconnection using T-Branch Connector(Female-to-Male)

Part Number Keying Package Quantity

1740277-1 Plus 20

1740277-2 Minus 20

Safety Clips (Optional)Part Number Description Package Quantity

1534226-1 Pivoted 100

2106207-1* NEC 2008/USA UTE C15-712/France 100

*Instruction Sheet : 408-10296

Connector Dust CoversPart Number Description Package Quantity

1987423-1 Female housing cover with strap 100

1394739-1 Male housing cover with strap 100

1987424-1 Female housing no strap 100

1987419-1 Male housing no strap 100

Note : Dust cap are reusable

Frame Mount Connector

Part Number Description Wire SizeRated

Current Standard

1971635-1 Frame Mount Connector 2.5 - 4.0 mm2 12 A TV (UL with cover)

1971653-1 Cover (for UL approval)

Product spec.: 108-106054, Application spec.: 114-106009


te.com/solar





30

DC Converter Receptacle

With O-Ring and Metal Nut (kit with screw-machined contact)


Keying Package Quantity Standardmm2 AWG

1394738-1 2.5 14 Plus 100 TV1394738-3 4.0 12 Plus 100 TV

1394738-9 6.0 10 Plus 100 TV

1394738-2 2.5 14 Minus 100 TV

1394738-4 4.0 12 Minus 100 TV1-1394738-0 6.0 10 Minus 100 TV

2120382-1 2.5 14 Plus 100 UL2120382-3 4 12 Plus 100 UL

2120382-5 6 10 Plus 100 UL

2120382-2 2.5 14 Minus 100 UL

2120382-4 4 12 Minus 100 UL2120382-6 6 10 Minus 100 UL

With Flat Seal and Plastic Nut (kit with screw-machined contact)


Keying Flat Seal Color Package Quantity Standardmm2 AWG

1740210-1 2.5 14 Plus Black 100 TV1740210-3 4.0 12 Plus Black 100 TV

1740210-5 6.0 10 Plus Black 100 TV

1740210-2 2.5 14 Minus Black 100 TV

1740210-4 4.0 12 Minus Black 100 TV

1740210-6 6.0 10 Minus Black 100 TV

1740210-7 2.5 14 Plus Red 100 TV

1740210-9 4.0 12 Plus Red 100 TV

1-1740210-1 6.0 10 Plus Red 100 TV

1740210-8 2.5 14 Minus Blue 100 TV

1-1740210-0 4.0 12 Minus Blue 100 TV1-1740210-2 6.0 10 Minus Blue 100 TV

Technical DataElectrical Features



Contact Resistance : 1 m typical

Mechanical Features

Dimensions : Diameter 18 mm (.71 inch)


Protection Degree : IP 67, mated

Contact Finish : Silver plated

Standards

TV approved

UL Listed


te.com/solar






31

As part of expanding the SOLARLOK product line, Tyco Electronics produces wire that is

designed to meet the harsh environmental conditions typical of photovoltaic installations.

The flexible, dual wall, halogen free and cross linked solar wire offers long term stability with

TV UL approval. Its outstanding features include: high resistance against environmental

conditions such as humidity, UV-radiation and ozone. In addition, it has excellent resistance to

abrasion and temperature extremes. The wire has a high dielectric withstanding voltage and due

to its fine-stranded, tin plated copper conductor, it is easy to handle, bend, route, and to strip.

Solar Cable : Global TV and UL 4703

Technical DataMaterial

Conductor : Stranded tin plated copper

Insulation : Electron beam cross-linked polyolefin

Sheath : Electron beam cross-linked halogen free polyolefin

Color : Black (Blue/Red upon request)

Electrical Features

Voltage Rating (as per TV requirement 600/1000 VAC, 1800 V DC): 1800/3000 VAC: 2600 VDC

Wire Size Range: 2.5 mm2 (AWG 14): 4.0 mm2 (AWG 12): 6.0 mm2 (AWG 10)

Standards

TV certified according to 2PfG 1169/08.2007 (PV1-F) : RG0021060

UL certified according to UL Outline 4703 (PV wire, type ZKLA) : E317230

Fire Performance : IEC 60332-1-2, UL 1581 1080/VW1, EN 50267-2-1/2, EN 50305

Conductor : IEC 60228 class 5 (stranded and flexible tin plated copper wire)

Global TV and UL 4703

Color Part Number

Cross Section ConductorDiameter

(mm)Weight (kg/km)

Reel Package

(m)mm2 AWG Construction no. x mm

Max Diameter

(mm)

Black

956297-4 2.5 14 50 x 0,26 1.95 6,65 +0,15/-0,1 62.5 500

956298-4 4.0 12 56 x 0,31 2.50 6,90 +/-0,10 75.8 500

956299-4 6.0 10 84 x 0,31 3.05 7,35 +0,3/-0,25 95.5 500

1-956297-4 2.5 14 50 x 0,26 1.95 6,65 +0,15/-0,1 62.5 100

1-956298-4 4.0 12 56 x 0,31 2.50 6,90 +/-0,10 75.8 100

1-956299-4 6.0 10 84 x 0,31 3.05 7,35 +0,3/-0,25 95.5 100

TV approved cable upon request

More than 50 years of expected lifetime (acc. to TUV 2PfG1169/08.2007)

More than 50% higher insulation resis-tance provides a superior safety

Can withstand the lowest temperature in its range (-60C at fixed installation)

Temperature Rating : 40C up to +125C

TV and UL approved

Dual wall insulation

Excellent resistance to abrasion

Excellent flexibility and stripping performance

Features & Benefits


te.com/solar





32

USE-2 approved solar cable for the North American market UL approved cable is offered in 10 through 14 AWG. This cable is approved for USE-2, XHHW-2, RHW-2, or RHH. Sunlight, gasoline, and petroleum resistance make this an ideal cable for any solar installation in North America. A high strand count increases the flexibility and tinned copper wire strands ease the use of this cable.

Type USE-2 (For US Installation), UL Approved Cable

Color Part Number Cross SectionAWGDiameter

(inch)Reel Package

(ft)

Black

1986166-2 14 0.17 500

1986166-3 14 0.17 2,500

1986165-2 12 0.19 500

1986165-3 12 0.19 2,500

1986164-2 10 0.21 500

1986164-3 10 0.21 2,500

Solar Cable : Type USE-2

Technical DataElectrical Features

Voltage Rating : 600 V DC

Mechanical Features

Operating Temperature : up to +90C

Standards

UL certified to 854 (USE-2) : 12-10 AWG

UL File E314122 and E314123

Insulation provides resistance to U.V., water, ozone, fluids, salt, gasoline, and petroleum general weathering

High strand count conductor provides flexibility and stripping performanc

Multiple cable diameters available

Features & Benefits


te.com/solar






33

Wiring Example with Extension Cables

Cable Assembly

Cable Assembly VersionPart Numbers for Cable Length

1 m 3 m 5 m 10 m 20 m

1987376-1 1987376-2 1987376-3 1987376-4 1987376-5

1-1987376-1 1-1987376-2 1-1987376-3 1-1987376-4 1-1987376-5

2-1987376-1 2-1987376-2 2-1987376-3 2-1987376-4 2-1987376-5

3-1987376-1 3-1987376-2 3-1987376-3 3-1987376-4 3-1987376-5

4-1987376-1 4-1987376-2 4-1987376-3 4-1987376-4 4-1987376-5

More variants (cable length, wire diameter, color) upon request.

Configuration Example at 4.0 mm2

Male Cable Coupler (+)1394461-3

Female Cable Coupler (+)1394462-3

InverterFemale Cable Coupler (+)1394462-3


Male Cable Coupler (-)1394461-4

Female Cable Coupler (-)1394462-4






te.com/solar





34

Serial Interconnection for Junction Boxes with Cable Outlet (4.0 mm2 / 12 AWG Wiring, Cable Outer Diameter 5.5 8.0 mm)

Interconnection Examples

DC/AC Converter

1394462-4 6-1394461-2

1394461-4 1394462-3

1394462-4 1394462-3

1394738-4 1394738-3


te.com/solar






35

Serial Interconnection for Junction Boxes with Plug Connectors(4.0 mm2 / 12 AWG Wiring, Cable Outer Diameter 5.5 8.0 mm)

Interconnection Examples (continued)

1394462-4 1394462-3

1394462-41394462-3

1394462-4 1394462-3

1394738-4 1394738-3

DC/AC Converter


te.com/solar





36

5-String Combiner Box

Combines up to 5 PV strings

Converts to standard wires

Completely pre-assembled

Plug & play design provides labor savings and minimizes installer error during installation

Uses existing products currently produced by Tyco Electronics

UL 1741 listed

Features & Benefits

Technical Data

The SOLARLOK combiner box assembly is used to combine up to five strings in a

preterminated connectorized weather-resistant enclosure to meet National Electric Code

(NEC) requirements for series fusing of photovoltaic (PV) modules (solar panels).

The combiner box assembly consists of a box, cover (with hinges), transparent dead front

lid (under the cover), and 10 pre-terminated SOLARLOK connectors each with a removable

dust cover. The box features 4 knockouts (for output wiring), lock tab, mounting slots and

pre-wired grounding bolt.

The interior of the box holds 5 holder fuse blocks pre-wired to the positive SOLARLOK

connectors, 5 terminal blocks pre-wired to the negative SOLARLOK connectors, and an

equipment terminal block used to ground the equipment. Fuses are not included.

Part Number : 1954283-1

Output Wire : Cu ONLY, 90C, 14-4 AWG

Maximum Voltage : 600 V

Maximum Output Current : 75 A

Maximum Continuous Current : 60 A

Maximum Current Per String : 15 A

Maximum Fuse Rating : 15 A

Maximum Module Isc Per String : 9.6 A

Enclosure Type : NEMA 3

Ambient Temperature : -35C to 50C [-31C to 122F]

Negative Output Terminal Torque: 4 Nm [35 in-lbs]

Positive Output Terminal Torque: 14-10 AWG = 4 Nm [35 in-lbs]: 8 AWG = 4.5 Nm [40 in-lbs]: 6.4 AWG = 5.1 Nm [45 in-lbs]

Ground Terminal Block Torque: 4Nm [35 in-lbs]


te.com/solar






37

Application Tooling

Hand Crimp Tool for Screw Machine Contacts Includes Crimp Head & Locator PN : 3-1579014-7 (2.5 mm2 & 4.0 mm2) : 1-1579004-2 (4.0 mm2 & 6.0 mm2)

Extraction Tool (suitable for all wire sizes) PN : 1102855-3 (Standard Line Connector) PN : 1102855-9 (Slim Line Connector)

Insulator Stripper Includes length stop for all wire size (Suitable for our Solar Cable) PN : 4-1579002-2 (2.5 mm2, 4.0 mm2 and 6.0 mm2)

Cable Assembly Tooling Specs

Base Machine : PN : 539630-1

Electrical Terminator CS 200 for Screw Machine Contacts

Adaptor for Crimp HeadPN : 1579000-4

Crimp Head (2.5 mm2 and 4.0 mm2)PN : 3-1579016-8

Crimp Head (4.0 mm2 and 6.0 mm2)PN : 7-1579001-9

Crimp Head (AWG 10)PN : 8-1579001-2

Crimp Head (AWG 12)PN : 5-1579001-5

SOLARLOK Electric Terminator CS 200


te.com/solar





38

Application Tooling (continued)

Junction BoxAssembly Tooling

Connector Assembly Tooling

Wire Spring Clamp ToolPN : 1579007-2

Dioden/Jumper Spring Clamp Tool PN : 1579007-5

Foil Spring Clamp Tools

6 Rail Large Box (Shown) PN : 1579007-3

5 Rail (Not Shown) PN : 1740969-3

4 Rail Medium Box (Not Shown) PN : 1740969-1

3 Rail Small Box (Not Shown) PN : 1740969-2

100 Cable Coupler (Housings, Plus and Minus coded)*Cable outer diameter 5.5 mm to 8.0 mm

Crimp Contacts (4.0 mm2 and 6.0 mm2)

Pinch ring

Seals

Part Number : 1534858-1(Metric Wire)

Included in Kit:

Hand Crimp ToolPN : 1-1579004-2

Extraction ToolPN : 1102855-3

Insulation StripperPN : 4-1579002-2

Field Service Kit

20 Cable Coupler (Housings, Plus and Minus coded)*Cable outer diameter 5.5 mm to 8.0 mm

Crimp Contacts (6.0 mm2)

SOLARLOK Field Manual

Instruction Sheets

Part Number : 5-1579010-4

Included in Kit:

Hand Crimp ToolPN : 1-1579004-2

Extraction ToolPN : 1102855-3

SOLARLOK INSTALLER STARTER KIT,Standard Line Connector

Part Number : 6-1579010-4

SOLARLOK INSTALLER STARTER KIT,Slim Line Connector

Hexagon Spanner Head for torque Wrench

PN : 523229-1 Size 13 mm (Standard Line Connector) PN: 523229-2 Size 11 mm (Slim Line Connector)

Torque Wrench, PN : 2161345-1, 1.2 3.0 Nm (Standard Line Connector) PN: 2161345-3, 0.3 1.2 Nm (Slim Line Connector)


te.com/solar






39

IMPORTANT NOTE

General Comments

Termination of the Cable Wires and Crimping of

the Contacts

3.1 Handling of the Connectors

Assembly and Installation GuidelinesSOLARLOK plug connectors

ATTENTION : This connector is to be used only to interconnect firmly fixed cables

DO NOT DISCONNECT UNDER LOAD : Current path should only be disconnected using approved disconnect devices.

SOLARLOK component cable can be labeled with label PN : 1718077-1.(DO NOT DISCONNECT UNDER LOAD)

PROTECT AGAINST SHOCK : Ensure that conductors and their associated connectors are separated from opposite polarity components.

Mounting and installation must be done by qualified and trained staff considering all applying safety regulations. Failure to follow all instructions in Application Specification 114-18488 (available at www.tycoelectronics.com/documents), including using only approved TE tooling (if applicable), can result in improper installation and/or crimping which is dangerous and may cause or contribute to electrical fires. Should be used only by individuals with proper training and experience.

Any kind of pollution (dust, oil, humidity, etc.) during the assembly process or to the unmated

connector can degrade contact and connector performance. This applies in particular to the

seals and the crimping of the contacts. A clean assembly environment is essential.

SOLARLOK connectors use different crimp contacts for various wire gauges.

Possible wire gauges are 2.5 mm2, 4.0 mm2, and 6.0 mm2, AWG 14, AWG 12 and AWG 10.

The tools to be used are selected based upon the wire gauge.

For the application specification, please refer to specification #114-18488.

When assembling the connectors, the following sequence must be followed:

1 : Stripping the wire to 9 +/- 1mm without damaging the strands (please refer to application specification 114-94061-1)

Fig.1


te.com/solar





40

Assembly and Installation Guidelines (continued)

3.1 Handling of the Connectors (continued)

2 : Insert the stripped wire into the wire crimp barrel until it stops.

3 : While holding the wire in place, squeeze tool handles together until ratchet releases.

4 : Push contact with cable into the connector housing (include seal/pinch ring combination and backshell) until you hear the contact is locked into position.

To verify contact engagement, give a gentle pull back on the cable to be sure

the contact is locked.

5 : Tighten backshell nut to 1.3 +0.2 Nm.(For tooling, please refer to page 33, item 5)

Fig. 3

Fig. 2

Fig. 4

CLICK


te.com/solar






41


3.2 Connector Latching

3.3 Disconnecting

When mating the SOLARLOK connectors, ensure the following:

1 : Connectors labeled with a plus or minus are keyed and can only be mated to similarly marked and keyed connectors.

CAUTION : THE NEUTRAL DESIGNATED PIN CONNECTORS INCORPORATE NO KEYING FEATURES AND MUST ONLY BE USED FOR SERIAL INTERCONNECTION OF PHOTOVOLTAIC MODULES. THE NEUTRAL PRODUCT SHOULD NOT BE USED WHERE MAINTAINING POLARITY IS CRITICAL.

2 : The polarity of the neutral connector should be labeled with Part Number : 1394725-1 or 1394725-2.

3 : The connector system is fully latched only when the latches are flush with the mating connectors. After the connector is fully latched, the optional latch locking

clip may be snapped, with a click, into place.

CAUTION : DO NOT DISCONNECTED UNDER LOAD.

Disconnect circuit load before unplugging connectors by using approved devices

(DC main switch, inverter connector and other devices). Cable assemblies should

be labeled with part number : 1394470-1.

1 : The locking mechanism is opened by depressing the latches.

2 : Pull out the connectors. While depressing the latches, disconnect the connector by pulling the connector halves apart.

Fig. 6

Fig. 5 (female connector)


te.com/solar





42


Application Examples

Storage

Tooling

See product specification 108-18701

Find available tools for the contact crimping on page 32 (please specify the required wire

gauge). An extraction tool (part number 1102855-3 and 1102855-9) is needed to disassemble the connector components. The tool is used to unlock the contact retention features, after

which the contact can be removed and re-used one time if necessary.

Fig. 7 : Serial (Wire Diagram) Fig. 8 : Parallel (Wire Diagram)

Technical Description

Fig. 9


te.com/solar






43

Engineering Notes


te.com/solar





44

Engineering Notes

As solar becomes an increasingly viable and competitive source of

alternative energy, TE Solar works with you every step of the way to

solve your connectivity challenges. Our proven expertise,

cross-industry innovation and broad range of connectivity solutions

are establishing the intelligent link between the panel and the grid

and driving the future of solar energy.

FOR MORE INFORMATION

TE Technical Support CenterInternet te.com/help

USA: +1 (800) 522-6752

Canada: +1 (905) 475-6222

Mexico +52 (0) 55-1106-0800

Latin/S. America: +54 (0) 11-4733-2200

Germany: +49 (0) 6251-133-1999

UK: +44 (0) 800-267666

France: +33 (0) 1-3420-8686

Netherlands: +31 (0) 73-6246-999

China: +86 (0) 400-820-6015

Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.

*as de ned www.te.com/leadfree

te.com

2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.

4-1773464-4 CIS WR 06/2012

SOLARLOK, TE Connectivity and TE connectivity (logo) are trademarks.

Other logos, product and/or company names might be trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensi

Eng Ds 4-1773464-4 Solarlok Solutions Catalog 0612

Documents

Transcript of Eng Ds 4-1773464-4 Solarlok Solutions Catalog 0612