ENERGY AND VIBRATION Does vibration consume energy?
-
Upload
alison-allison -
Category
Documents
-
view
226 -
download
3
Transcript of ENERGY AND VIBRATION Does vibration consume energy?
![Page 1: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/1.jpg)
ENERGY AND VIBRATION
Does vibration consume energy?
![Page 2: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/2.jpg)
General conditions:
• Motor GE, 1/3 hp, single-phase, 3450 rpm, 115 Volts bolted to the working table of a drill press.
• In order to increase the resolution the voltage was decreased to about 40 Volts.
• No attempt was made to balance the motor, but initially the vibration was reasonably low.
• The unbalance was created by adding weight (23 grams) to the pulley on diameter 1.5”.
• Following are data from the initial run:
![Page 3: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/3.jpg)
MIH-LO
![Page 4: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/4.jpg)
VOLTAGE-LO
![Page 5: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/5.jpg)
CURRENT-LO
![Page 6: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/6.jpg)
COMMENTS:• The overall vibration in horizontal direction was about 0.085 in/sec
mainly due to 1x.
• The vertical vibration was similar.
• Note the speed of 3553 rpm.
• The voltage is almost pure sine-wave (very low distortion – see the spectrum).
• The current is distorted more. But this distortion is nothing out of ordinary.
• The watts calculated from voltage and current: 47.38 W.
• Weight of 23 grams was added to the pulley at 1.5” radius.
• Every effort was made to keep the voltage constant
• Following slides are from the high vibration run:
![Page 7: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/7.jpg)
MIH-HI
![Page 8: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/8.jpg)
VOLTAGE-HI
![Page 9: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/9.jpg)
CURRENT-HI
![Page 10: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/10.jpg)
COMMENTS:
• The overall vibration increased to 1.5 in/sec (similarly in vertical direction.
• Note the speed of 3539 rpm.
• No change in voltage, the current increased from 1.66 Amp to 1.94 Amps.
• The calculated watts: 61.95 W
![Page 11: ENERGY AND VIBRATION Does vibration consume energy?](https://reader030.fdocuments.in/reader030/viewer/2022032709/56649ead5503460f94bb4632/html5/thumbnails/11.jpg)
CONCLUSIONS:
• The increased vibration caused drop in speed from 3553 RPM to 3539 RPM.
• The required watts have increased from 47.38 W to 61.95 W.