Printed in Japan 28.03(A.H)CRGE01-016

End Carriage, Geared Motor, Peripheral Equipment

KITO CRANE

BULLETIN NO. CRGE1912-01

U.S.A.HARRINGTON HOISTS, INC.401 West End Avenue, Manheim, PA 17545, U.S.A.TEL: +1-717-665-2000 FAX: +1-717-665-2861www.harringtonhoists.com

CANADAKITO CANADA INC.309-3815 1st. Avenue, Burnaby, BC. V5C 3V6, CANADATEL: +1-604-291-9955 FAX: +1-604-294-8855E-mail: info@kito.cawww.kito.ca

BRAZILKITO DO BRASIL COMÉRCIO DE TALHAS E GUINDASTES LTDAUnidade 38 do CLE – CENTRO LOGISTICO EMBURua José Semião Rodrigues Agostinho, 1370, Bairro Água Espraiada – Embu das Artes, SP, BRASILTEL: +55-11-3253-1000 FAX: +55-11-3253-1008E-mail: kito@br.kito.com www.kito.com/br

GERMANYKITO EUROPE GmbHHeerdter Lohweg 93, D-40549 Düsseldorf, GERMANYTEL: +49-(0)211-528009-00 FAX: +49-(0)211-528009-59E-mail: info@kito.netwww.kito.net

CHINAJIANGYIN KITO CRANE CO., LTD.18 Cheng Jiang East Road, Jiang Yin, Jiang Su 214429, CHINATEL: +86-510-86199666 FAX: +86-510-86196633www.kaicheng.comKITO HOISTS ＆ CRANES (SHANGHAI) CO., LTD.Room 11J, Zao-Fong Universe Building, No1800 ZhongShan West Road Shanghai 200235, CHINA TEL: +86-21-54488935 FAX: +86-21-54488937www.kito.com.cn

KOREAKITO KOREA CO., LTD.463-400, 3Dong 903, 15, 228Beon-gil, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, KOREATEL: +82-31-600-7450 FAX: +82-31-600-7469www.kito.kr

THAILANDSIAM KITO CO., LTD.205 M.2, T.Klongtumru, A.Muangchonburi, Chonburi 20000, THAILANDTEL: +66-3819-5711 FAX: +66-3819-5715www.siamkito.co.th

INDONESIAPT. KITO INDONESIAWisma Keiai 5F, Jl. Jend. Sudirman Kav.3-4, Jakarta 10220, INDONESIATEL: +62-21-572-4261 FAX: +62-21-572-4267E-mail: sales@id.kito.com

INDIAArmsel MHE Pvt. Ltd.4th Floor, Block II, Prestige Towers, No 99 & 100, Residency Road, Bengaluru-560025, INDIATEL: +91-80-49010500  FAX: +91-80-49010555www.armsel.com

TAIWANKITO TAIWAN CO., LTD.12F-1, 128c sec. 3, Ming-Shen East Road, Taipei, TAIWAN 10596TEL: +886-2-2719-7616 FAX: +886-2-2719-6900

Distributed by:

SHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809 JAPANTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com

•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •When you want to use our products for special purposes, consult us in advance.•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.•Product specifications may vary depending on the country. For more details please contact the nearest KITO dealer.

International Sales Subsidiaries

2 3

Cranes are widely used in the workplace to improve work efficiency,

to use limited space effectively and to help reduce costs.

To meet the diversifying demands of the industrial world,

KITO manufactures all kinds of cranes from simple manual cranes to motorized cranes with a single or double girder.

All of our products have been designed and built taking into consideration safety, operability and durability.

In addition, we have the cranes which are quiet and vibrate less and which are suitable

for a working environment where quiet operation is important.

Giving top priority to the every industrial workplace-KITO CRANES.

KITO Crane Applications

Crane Outline

End Carriage Capacity

Features of End Carriages

Geared Motor Capacity

Features of Geared Motors

End Carriage Specifications

Geared Motor Specifications

Crave peripheral Equipment Installation Outline

Control Boxes

SOFTRUN Device

Power Supply Cables and Accessories

Cable Hangers

Crane Girder Allowable Span

Reference Examples of Special Specification Systems

Note: All measurements used in this catalogue are metric (Sl unit system)

41114151617182628303132333435

Table of CONTENTS

2 3

Cranes are widely used in the workplace to improve work efficiency,

to use limited space effectively and to help reduce costs.

To meet the diversifying demands of the industrial world,

KITO manufactures all kinds of cranes from simple manual cranes to motorized cranes with a single or double girder.

All of our products have been designed and built taking into consideration safety, operability and durability.

In addition, we have the cranes which are quiet and vibrate less and which are suitable

for a working environment where quiet operation is important.

Giving top priority to the every industrial workplace-KITO CRANES.

KITO Crane Applications

Crane Outline

End Carriage Capacity

Features of End Carriages

Geared Motor Capacity

Features of Geared Motors

End Carriage Specifications

Geared Motor Specifications

Crave peripheral Equipment Installation Outline

Control Boxes

SOFTRUN Device

Power Supply Cables and Accessories

Cable Hangers

Crane Girder Allowable Span

Reference Examples of Special Specification Systems

Note: All measurements used in this catalogue are metric (Sl unit system)

41114151617182628303132333435

Table of CONTENTS

KITO CRANE APPLICATIONS [Overhead cranes]

CRANE TEST EQUIPMENTAt KITO, cranes are tested for durability and reliability using special equipment.

Max. test load50 t

Span30 m

Max. test load100 t

Overhead cranes1: 30/10 t Double girder

2: 2.8 t Single girder

3: 20/2.8 t Double girder

4: 2.8 t Single girder

Traveling crane Hoist

Test equipment capacity at KITO factory

KITO CRANE

1

2 3

44 5

KITO CRANE APPLICATIONS [Overhead cranes]

CRANE TEST EQUIPMENTAt KITO, cranes are tested for durability and reliability using special equipment.

Max. test load50 t

Span30 m

Max. test load100 t

Overhead cranes1: 30/10 t Double girder

2: 2.8 t Single girder

3: 20/2.8 t Double girder

4: 2.8 t Single girder

Traveling crane Hoist

Test equipment capacity at KITO factory

KITO CRANE

1

2 3

44 5

KITO CRANEKITO CRANE APPLICATIONS [Overhead cranes] [Low-head cranes]

Low-head cranes3: 10 t Single girder

4: 1 t Single girder

5: 1 t Single girder

3

4

5

Overhead cranes1: 5 t Double girder

2: 10/5 t Double girder

1

26 7

KITO CRANEKITO CRANE APPLICATIONS [Overhead cranes] [Low-head cranes]

Low-head cranes3: 10 t Single girder

4: 1 t Single girder

5: 1 t Single girder

3

4

5

Overhead cranes1: 5 t Double girder

2: 10/5 t Double girder

1

26 7

KITO CRANE APPLICATIONS [Gantry cranes]

KITO CRANE

4

5

6

7

8

9

10Jib cranes4: 6t Pillar mounted jib crane - auto rotary5: 2t Pillar mounted jib crane6: 2t Pillar mounted jib cranes7: 2t Wall mounted jib crane - auto rotary8: 13t Pillar mounted jib crane - auto rotary9: 2t Wall mounted jib crane - auto rotary10: 1.5t Wall mounted jib cranes - electric traveling

Gantry cranes1: 20 t Gantry cranes

2: 5 t Single leg gentry crane

3: 2.8 t Gantry cranes

1

2

3

[Jib cranes]

8 9

KITO CRANE APPLICATIONS [Gantry cranes]

KITO CRANE

4

5

6

7

8

9

10Jib cranes4: 6t Pillar mounted jib crane - auto rotary5: 2t Pillar mounted jib crane6: 2t Pillar mounted jib cranes7: 2t Wall mounted jib crane - auto rotary8: 13t Pillar mounted jib crane - auto rotary9: 2t Wall mounted jib crane - auto rotary10: 1.5t Wall mounted jib cranes - electric traveling

Gantry cranes1: 20 t Gantry cranes

2: 5 t Single leg gentry crane

3: 2.8 t Gantry cranes

1

2

3

[Jib cranes]

8 9

Girder

Hoist & trolley

Geared motor

Side roller

End carriage

Traveling base (H-beam)

Traveling rail (light rail or square rail)Urethane wheel

Crane span

Traveling rail

Side roller

Geared motorCatwalk

Girder

Side rollerHoist & trolley

Urethane wheel

Crane span

Traveling rail

Side roller

End carriage

Traveling base (H-beam)

Traveling rail (light rail or square rail)

CRANE OUTLINE

OVERHEAD CRANE [Single Girder]

The single girder overhead crane can be installed on traveling

rails on the brackets of building pillars. This type of crane has a

relatively larger capacity and can utilize space below ceiling

rafters, and so a wider lifting range is assured. Guiding the path

using side rollers provides smooth traveling and the girders can

be designed according to the rated load and span. Moreover,

the shorter overall length of the end carriage and the geared-

motor installation in optimum position allows for a more effective

use of work space.

A dual speed type crane is available for speed- controlled

operations. There is also a urethane wheel type version of this

crane that effectively reduces noise and vibrations in travel. It is

recommended for factories near residential areas, duplex office-

homes and for operation at night. Running urethane wheels on

the top flange of the H-beam reduces noise and vibration in

travel. With these cranes it is not necessary to install a light rail,

thus reducing installation costs and time.

Single speed craneThis crane employs geared motors specially designed by KITO

to ensure smooth starts and stops. It is suited for general work.

Dual speed craneThis crane is capable of pendant button-controlled speed shift

between low and high speed (reduction ratio of 4:1). It is suited

for work requiring varied speed operation.

Manual geared type craneThis manual geared type crane balances travel smoothly by

synchronizing the driving wheels on both sides. With a relatively

shorter travel distance, it is suited for low frequency work.

Optional SOFTRUN device This device electrically controls motor speed which enables to

accelerate smoothly in travel and minimizes load swing at

start-up.

It is highly suited for handling high inertia loads or operating long

span cranes.

1

Urethane Wheel type

KITO CRANE

The double girder overhead crane can be installed on traveling

rails on the brackets of building pillars. The double rail type

trolley runs along parallel girders suitable for larger capacity

cranes, and also can utilize space below ceiling rafters, and so a

wider lifting range assured. Smooth traveling is obtained using a

guide mechanism with side rollers, and the girder construction

can be designed according to the rated load and span.

Moreover, the shorter overall length of the end carriage allows

for a more effective use of the work space.

A dual speed type crane is available for speedcontrolled

operations. There is also a urethane wheel type crane that

effectively reduces noise vibration in travel. It is recommended

for factories near residential areas, duplex office-homes and for

operation at night. Running urethane wheels on the top flange

of the H-beam reduces noise and vibration in travel. With these

cranes, it is not necessary to install a light rail thus reducing on

installation costs and time.

Single speed craneThis crane employs geared motors specially designed by KITO

to ensure smooth starts and stops. It is suited for general work.

Dual speed craneThis crane is capable of pendant button-controlled speed shift

between low and high speed (reduction ratio of 4:1). It is suited

for work requiring varied speed operation.

Optional SOFTRUN deviceThis device electrically controls motor speed which enables to

accelerate smoothly in travel and minimizes load swing at

start-up.

It is highly suited for handling high inertia loads or operating long

span cranes.

CRANE OUTLINE 2OVERHEAD CRANE [Double Girder]

Urethane Wheel type

10 11

Girder

Hoist & trolley

Geared motor

Side roller

End carriage

Traveling base (H-beam)

Traveling rail (light rail or square rail)Urethane wheel

Crane span

Traveling rail

Side roller

Geared motorCatwalk

Girder

Side rollerHoist & trolley

Urethane wheel

Crane span

Traveling rail

Side roller

End carriage

Traveling base (H-beam)

Traveling rail (light rail or square rail)

CRANE OUTLINE

OVERHEAD CRANE [Single Girder]

The single girder overhead crane can be installed on traveling

rails on the brackets of building pillars. This type of crane has a

relatively larger capacity and can utilize space below ceiling

rafters, and so a wider lifting range is assured. Guiding the path

using side rollers provides smooth traveling and the girders can

be designed according to the rated load and span. Moreover,

the shorter overall length of the end carriage and the geared-

motor installation in optimum position allows for a more effective

use of work space.

A dual speed type crane is available for speed- controlled

operations. There is also a urethane wheel type version of this

crane that effectively reduces noise and vibrations in travel. It is

recommended for factories near residential areas, duplex office-

homes and for operation at night. Running urethane wheels on

the top flange of the H-beam reduces noise and vibration in

travel. With these cranes it is not necessary to install a light rail,

thus reducing installation costs and time.

Single speed craneThis crane employs geared motors specially designed by KITO

to ensure smooth starts and stops. It is suited for general work.

Dual speed craneThis crane is capable of pendant button-controlled speed shift

between low and high speed (reduction ratio of 4:1). It is suited

for work requiring varied speed operation.

Manual geared type craneThis manual geared type crane balances travel smoothly by

synchronizing the driving wheels on both sides. With a relatively

shorter travel distance, it is suited for low frequency work.

Optional SOFTRUN device This device electrically controls motor speed which enables to

accelerate smoothly in travel and minimizes load swing at

start-up.

It is highly suited for handling high inertia loads or operating long

span cranes.

1

Urethane Wheel type

KITO CRANE

The double girder overhead crane can be installed on traveling

rails on the brackets of building pillars. The double rail type

trolley runs along parallel girders suitable for larger capacity

cranes, and also can utilize space below ceiling rafters, and so a

wider lifting range assured. Smooth traveling is obtained using a

guide mechanism with side rollers, and the girder construction

can be designed according to the rated load and span.

Moreover, the shorter overall length of the end carriage allows

for a more effective use of the work space.

A dual speed type crane is available for speedcontrolled

operations. There is also a urethane wheel type crane that

effectively reduces noise vibration in travel. It is recommended

for factories near residential areas, duplex office-homes and for

operation at night. Running urethane wheels on the top flange

of the H-beam reduces noise and vibration in travel. With these

cranes, it is not necessary to install a light rail thus reducing on

installation costs and time.

Single speed craneThis crane employs geared motors specially designed by KITO

to ensure smooth starts and stops. It is suited for general work.

Dual speed craneThis crane is capable of pendant button-controlled speed shift

between low and high speed (reduction ratio of 4:1). It is suited

for work requiring varied speed operation.

Optional SOFTRUN deviceThis device electrically controls motor speed which enables to

accelerate smoothly in travel and minimizes load swing at

start-up.

It is highly suited for handling high inertia loads or operating long

span cranes.

CRANE OUTLINE 2OVERHEAD CRANE [Double Girder]

Urethane Wheel type

10 11

Geared motor

End carriage

Urethane wheel

Hoist & trolley

Girder

Traveling rail

Hoist & trolleyCatwalk

Safety cage

Girder

End carriage

Geared motor

Traveling rail

CRANE OUTLINE

LOW-HEAD CRANES

The low-head crane is suspended from the traveling rail (I-

beam) which is fixed to the ceiling rafters of the building.

Because the traveling rail location and span can be freely

chosen, the crane can be designed to suit production line

processes. The detaching design for the track wheel and its

axle reduces installation and maintenance time.

A dual speed type crane is available for speedcontrolled

operation. There is also a urethane wheel type version of the

crane that effectively reduces noise and vibration in travel. It is

recommended for factories near residential areas, duplex office-

homes, and for operation at night.

Single speed craneThis crane employs geared motors specially designed by KITO to

ensure smooth starts and stops. It is suited for general work.

Dual speed craneThis crane is capable of pendant button-controlled speed shift

between low and high speed (reduction ratio of 4:1). It is suited

for work requiring varied speed operation.

Manual geared typeThis manual geared type version of the crane balances travel

smoothly by synchronizing the driving wheels on both sides. With a

relatively shorter travel distance, it is suited for low frequency work.

Manual plain type (Low-head only)This is the simplest manual type of crane and lifting and

traveling are operated by hand. It is suited for light work.

Optional SOFTRUN deviceThis device electrically controls motor speed which enables to

accelerate smoothly in travel and minimizes load swing at start-up.

It is highly suited for handling high inertia loads or operating long

span cranes.

3 CRANE OUTLINE

BRIDGE CRANES4

Urethane Wheel type

Kito's Gantry Crane Series offer "Gantry Cranes", which run

on floor mounted rail by its two legs fabricated from steel

sections, and "Single Leg Gantry Cranes", which have the end

of the bridge supported by an end truck running on an

elevated rail.

It is possible to customize this crane for the work and the

installtion site. "Gantry Cranes" can be used both outside and

inside, and in conbination with heavy cranes.

12 13

Geared motor

End carriage

Urethane wheel

Hoist & trolley

Girder

Traveling rail

Hoist & trolleyCatwalk

Safety cage

Girder

End carriage

Geared motor

Traveling rail

CRANE OUTLINE

LOW-HEAD CRANES

The low-head crane is suspended from the traveling rail (I-

beam) which is fixed to the ceiling rafters of the building.

Because the traveling rail location and span can be freely

chosen, the crane can be designed to suit production line

processes. The detaching design for the track wheel and its

axle reduces installation and maintenance time.

A dual speed type crane is available for speedcontrolled

operation. There is also a urethane wheel type version of the

crane that effectively reduces noise and vibration in travel. It is

recommended for factories near residential areas, duplex office-

homes, and for operation at night.

Single speed craneThis crane employs geared motors specially designed by KITO to

ensure smooth starts and stops. It is suited for general work.

Dual speed craneThis crane is capable of pendant button-controlled speed shift

between low and high speed (reduction ratio of 4:1). It is suited

for work requiring varied speed operation.

Manual geared typeThis manual geared type version of the crane balances travel

smoothly by synchronizing the driving wheels on both sides. With a

relatively shorter travel distance, it is suited for low frequency work.

Manual plain type (Low-head only)This is the simplest manual type of crane and lifting and

traveling are operated by hand. It is suited for light work.

Optional SOFTRUN deviceThis device electrically controls motor speed which enables to

accelerate smoothly in travel and minimizes load swing at start-up.

It is highly suited for handling high inertia loads or operating long

span cranes.

3 CRANE OUTLINE

BRIDGE CRANES4

Urethane Wheel type

Kito's Gantry Crane Series offer "Gantry Cranes", which run

on floor mounted rail by its two legs fabricated from steel

sections, and "Single Leg Gantry Cranes", which have the end

of the bridge supported by an end truck running on an

elevated rail.

It is possible to customize this crane for the work and the

installtion site. "Gantry Cranes" can be used both outside and

inside, and in conbination with heavy cranes.

12 13

14 15

Type

Mot

oriz

edU

reth

ane

Whe

el T

ype

Ove

rhea

dLo

w-h

ead

Ove

rhea

d

Dou

ble

Gird

erM

anua

l Typ

e

Ove

rhea

dO

verh

ead

Gea

red

Pla

inG

eare

d

Low

-hea

dU

reth

ane

Whe

elTy

peLo

w-

head

Span (m)

1235

7.51012351235

7.5101235

7.510152035

7.51015201235

0.511235

W.L.L.(t) Page

18

22

19

23

20

21

24

25

24

• Optional SOFTRUN is recommended for color models.

• W.L.L.: Working Load Limit (t).

END CARRIAGE CAPACITY

•To meet customer needs, we have raised performance while offering more standardized models. The track wheel is now made of

a carbon steel construction and is, thus endurable and long lasting (excluding the plain type crane which is made from heat

treated hot- rolled steel plates)

•Products are primer-coated which allows customers to choose the desired top coat color (KITO Yellow (Equivalent to Munsell

7.2YR6.5/14.5) is painted for plain type cranes).

•Punch-mark on end carriages for easy centering and drilling for girders.

Overhead end carriages

Overhead urethane wheel type end carriages

Low-head end carriages

Low-head urethane wheel type end carriages

Manual plain type end carriage

Manual geared type end carriage

EL 010 9

WEO 150 27------------

------- ---------

------

------ S

H------

------

EOELCEOCELWEOCWEOGOGLPL

Ex.: 010 = 1 t, 150 = 15 tTypesRated load

Ex.: 9 = 9 m, 27 = 27 mSpan

Motorized overhead end carriagesMotorized low-head end CarriagesUrethane wheel motorized overhead end carriagesUrethane wheel motorized low-head end carriagesMotorized overhead double girder end carriagesUrethane wheel motorized overhead double girder end carriagesGeared type manual overhead end carriagesGeared type manual low-head and carriagesPlain type manual low-head end carriages

Speed Ex.: L S H SD

Features of end carriages

How to read carriage types

• W.L.L.: indicates the maximum mass (working load limit) for general use.• Traveling speeds are show on pages 18 to 23.

3 6 9 12 15 18 21 27

EO010-12

EO020-12

EO030-12

EO050-12

EO075-12

EO100-12

EL010-12

EL020-12

EL030-12

EL050-12

CEO010-12

CEO020-12

CEO030-12

CEO050-12

CEO075-12

CEO100-12

GO010-12

GO020-12

GO030-12

GO050-12

GL010-12

GL020-12

GL030-12

GL050-12

EL010-15

EL020-15

EL030-15

EL050-15

CEO010-15

CEO020-15

CEO030-15

CEO050-15

WEO030-15

WEO050-15

WEO075-15

WEO100-15

WEO150-15

WEO200-15

CWEO030-15

CWEO050-15

CWEO075-15

CWEO100-15

CWEO150-15

CWEO200-15

EO010-18

EO020-18

EO030-18

EO050-18

EO075-18

EO100-18

CEO010-18

CEO020-18

CEO030-18

CEO050-18

CEO075-18

CEO100-18

EO010-21

EO020-21

EO030-21

EO050-21

EO075-21

EO100-21

CEO010-21

CEO020-21

CEO030-21

CEO050-21

CEO075-21

CEO100-21

WEO030-21

WEO050-21

WEO075-21

WEO100-21

WEO150-21

WEO200-21

CWEO030-21

CWEO050-21

CWEO075-21

CWEO100-21

CWEO150-21

CWEO200-21

WEO030-27

WEO050-27

WEO075-27

WEO100-27

WEO150-27

WEO200-27

CWEO030-27

CWEO050-27

CWEO075-27

CWEO100-27

CWEO150-27

CWEO200-27

EO010-9

EO020-9

EO030-9

EO050-9

EL010-9

EL020-9

EL030-9

EL050-9

CEO010-9

CEO020-9

CEO030-9

CEO050-9

CEL010-9

CEL020-9

GO010-9

GO020-9

GO030-9

GO050-9

PL005-9

PL010-9

EL010-6

EL020-6

EL030-6

EL050-6

PL005-3 PL005-6

PL010-6

GL010-6

GL020-6

GL030-6

GL050-6

=10/12 m/min=20/24 m/min=30/36 m/min=20:5/24:6 m/min

---------

◎Track wheel maintenance is easy because of the open frame construction.◎Travel is smooth because of a guide mechanism with side rollers.

◎Durability has been improved with our own developed urethane wheels.◎The urethane wheels run directly over the top flange of the H-beam, thus reducing noise and vibration in travel. It is not necessary to install a light rail thus reducing installation costs and time.◎Travel is smooth because of a guide mechanism with side rollers.

◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation and maintenance time.◎Anti-drop plates are equipped on the carriage (for CSA).

◎This end carriage employs durable urethane wheels developed by KITO and an idling gear in reinforced nylon resin and reduces noise and vibrations in travel.◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation maintenance time.

◎The hand pulling operation has become smoother and easier with a pressed metal wheel (0.5 t span 3 m and 1 t span 6 m) and side rollers (1 t span 9 m).

◎Pulling the hand chain makes both wheels move at the same time for balanced smooth traveling.

14 15

Type

Mot

oriz

edU

reth

ane

Whe

el T

ype

Ove

rhea

dLo

w-h

ead

Ove

rhea

d

Dou

ble

Gird

erM

anua

l Typ

e

Ove

rhea

dO

verh

ead

Gea

red

Pla

inG

eare

d

Low

-hea

dU

reth

ane

Whe

elTy

peLo

w-

head

Span (m)

1235

7.51012351235

7.5101235

7.510152035

7.51015201235

0.511235

W.L.L.(t) Page

18

22

19

23

20

21

24

25

24

• Optional SOFTRUN is recommended for color models.

• W.L.L.: Working Load Limit (t).

END CARRIAGE CAPACITY

•To meet customer needs, we have raised performance while offering more standardized models. The track wheel is now made of

a carbon steel construction and is, thus endurable and long lasting (excluding the plain type crane which is made from heat

treated hot- rolled steel plates)

•Products are primer-coated which allows customers to choose the desired top coat color (KITO Yellow (Equivalent to Munsell

7.2YR6.5/14.5) is painted for plain type cranes).

•Punch-mark on end carriages for easy centering and drilling for girders.

Overhead end carriages

Overhead urethane wheel type end carriages

Low-head end carriages

Low-head urethane wheel type end carriages

Manual plain type end carriage

Manual geared type end carriage

EL 010 9

WEO 150 27------------

------- ---------

------

------ S

H------

------

EOELCEOCELWEOCWEOGOGLPL

Ex.: 010 = 1 t, 150 = 15 tTypesRated load

Ex.: 9 = 9 m, 27 = 27 mSpan

Motorized overhead end carriagesMotorized low-head end CarriagesUrethane wheel motorized overhead end carriagesUrethane wheel motorized low-head end carriagesMotorized overhead double girder end carriagesUrethane wheel motorized overhead double girder end carriagesGeared type manual overhead end carriagesGeared type manual low-head and carriagesPlain type manual low-head end carriages

Speed Ex.: L S H SD

Features of end carriages

How to read carriage types

• W.L.L.: indicates the maximum mass (working load limit) for general use.• Traveling speeds are show on pages 18 to 23.

3 6 9 12 15 18 21 27

EO010-12

EO020-12

EO030-12

EO050-12

EO075-12

EO100-12

EL010-12

EL020-12

EL030-12

EL050-12

CEO010-12

CEO020-12

CEO030-12

CEO050-12

CEO075-12

CEO100-12

GO010-12

GO020-12

GO030-12

GO050-12

GL010-12

GL020-12

GL030-12

GL050-12

EL010-15

EL020-15

EL030-15

EL050-15

CEO010-15

CEO020-15

CEO030-15

CEO050-15

WEO030-15

WEO050-15

WEO075-15

WEO100-15

WEO150-15

WEO200-15

CWEO030-15

CWEO050-15

CWEO075-15

CWEO100-15

CWEO150-15

CWEO200-15

EO010-18

EO020-18

EO030-18

EO050-18

EO075-18

EO100-18

CEO010-18

CEO020-18

CEO030-18

CEO050-18

CEO075-18

CEO100-18

EO010-21

EO020-21

EO030-21

EO050-21

EO075-21

EO100-21

CEO010-21

CEO020-21

CEO030-21

CEO050-21

CEO075-21

CEO100-21

WEO030-21

WEO050-21

WEO075-21

WEO100-21

WEO150-21

WEO200-21

CWEO030-21

CWEO050-21

CWEO075-21

CWEO100-21

CWEO150-21

CWEO200-21

WEO030-27

WEO050-27

WEO075-27

WEO100-27

WEO150-27

WEO200-27

CWEO030-27

CWEO050-27

CWEO075-27

CWEO100-27

CWEO150-27

CWEO200-27

EO010-9

EO020-9

EO030-9

EO050-9

EL010-9

EL020-9

EL030-9

EL050-9

CEO010-9

CEO020-9

CEO030-9

CEO050-9

CEL010-9

CEL020-9

GO010-9

GO020-9

GO030-9

GO050-9

PL005-9

PL010-9

EL010-6

EL020-6

EL030-6

EL050-6

PL005-3 PL005-6

PL010-6

GL010-6

GL020-6

GL030-6

GL050-6

=10/12 m/min=20/24 m/min=30/36 m/min=20:5/24:6 m/min

---------

◎Track wheel maintenance is easy because of the open frame construction.◎Travel is smooth because of a guide mechanism with side rollers.

◎Durability has been improved with our own developed urethane wheels.◎The urethane wheels run directly over the top flange of the H-beam, thus reducing noise and vibration in travel. It is not necessary to install a light rail thus reducing installation costs and time.◎Travel is smooth because of a guide mechanism with side rollers.

◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation and maintenance time.◎Anti-drop plates are equipped on the carriage (for CSA).

◎This end carriage employs durable urethane wheels developed by KITO and an idling gear in reinforced nylon resin and reduces noise and vibrations in travel.◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation maintenance time.

◎The hand pulling operation has become smoother and easier with a pressed metal wheel (0.5 t span 3 m and 1 t span 6 m) and side rollers (1 t span 9 m).

◎Pulling the hand chain makes both wheels move at the same time for balanced smooth traveling.

16 17

Type

Mot

oriz

edU

reth

ane

Whe

el T

ype

Ove

rhea

dLo

w-h

ead

Ove

rhea

d

Dou

ble

Gird

er

Ove

rhea

dU

reth

ane

Whe

elTy

peLo

w-

head

Span (m)

1

2

3

5

7.5

10

1

2

3

5

1

2

3

5

7.5

10

1

2

3

5

7.5

10

15

20

3

5

7.5

10

15

20

G1MO025□-□

G1MO025□-□

G1ML025□-□

G1ML025□-□

G1ML025□-□

G1MO025□-□

G1MO040□-□

G1MO075□-□

G1MO150□-□

G1ML025□-□

G1MO075□-□

G1MO150T-□

G1MO150□-□

G1MO150□-□

G1MO150□-□

G1MO150□-□x2

G1MO150□-□x2

G1MO150□-□x2

G1MO025□-□

G1MO025□-□

G1MO075□-□

G1MO150T-□

G1ML040□-□

G1MO040□-□

G1MO150□-□

G1MO150□-□

G1MO025□-□G1MO040T-□

G1MO025□-□G1MO040T-□

G1MO075□-□G1MO150T-□

G1MO075□-□G1MO150T-□

G1MO025□-□G1MO040T-□

G1MO025□-□G1MO040T-□

G1MO040□-□G1MO075T-□

G1MO075□-□G1MO150T-□

G1MO075□-□G1MO150T-□

G1MO075□-□G1MO150T-□

G1MO150□-□G1MO150□-□x2

G1MO150□-□G1MO150□-□x2

G1MO150□-□G1MO150□-□x2

G1ML040□-□G1ML075T-□

G1ML025□-□ G1ML040T-□

G1MO040□-□G1MO075T-□

G1MO040□-□ G1MO075T-□G1MO075□-□G1MO150T-□G1MO075□-□G1MO150T-□

G1ML040□-□G1ML075T-□

W.L.L.(t) 3 6 9 12 15 18 21 27

G1ML075□-□

* *

G1ML025□-□

G1ML025□-□

G1ML025□-□

G1ML025□-□

G1MO150□-□x2

G1MO150□-□x2

G1MO150□-□x2 G1MO150□-□x2

G1MO150□-□

G1MO150□-□

G1MO150□-□

G1MO075□-□

G1MO075□-□

G1MO075□-□

G1M150T-□

G1MO025□-□

G1MO040T-□

Available onyour request

Available onyour request

GEARED MOTOR CAPACITY

•KITO cranes employ a geared motor with an electromagnetic brake. Brake torque is adjustable from 0 to 50% (for 0.25 kW :from 30 to 80%) of the rated torque of the motor, thus the load swing can be minimized by adjusting the brake torque.

•The motor uses a helical gear, which reduces noise during operation.

•SOFTRUN devices are available to provide smooth starts and minimize swing.

•Motors are available in three different single speed (10/12, 20/24, and 30/36 m/min 50/60 Hz) types and one dual speed (20/5 24/6 m/min 50/60 Hz) type (reduction ratio of 4:1) and they make work more efficient.

G1MO025 L-E

EO010-12

---------- --- --------

---- ---- ----

--- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)

SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)

Speed (50/60Hz)

E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz

380 V/50 Hz, 380-460 V/60 Hz

E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz

380 V/50 Hz, 380-460 V/60 HzPower sources

025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW

Motor outputs (50/60Hz)

G1MO040 T-Z---------- --- -------- --- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

T: 30/36 m/mim (High speed)Speed (50/60Hz)

Power sources

040: (0.25)+0.34/0.4 kW075: (0.4)+0.63/0.75 kW150: (0.75)+1.25/1.5 kW

Motor outputs

Features of geared motors

How to read types (example)

How to order end carriages (example)

When ordering an end carriage and geared motor separately

• 1.5 kWx2 means 2 geared motors are used on 1 end carriage (on side): 4 driving motor type.

• For dual listings, models on the upper line are the low, standard and dual speeds end carriages, whereas models on the lower line are the high speed end carriages. Single listings show the low, standard, high and dual speed end carriages.

• *Available on request ( 2.2 kWx2 for 30/36 m/min. speed).

• W.L.L.: Working Load Limit (t).

Ex. Overhead end carriage 1 t span 12 m. Geared motor for traveling speed 20 m/min, motor output 0.25 kW, and electric voltage 380 V 50 Hz.

Overhead

Standard speed 20 m/min

Voltage 380 V

End carriageshown on page 18

G1MO025S-Z shown on page 26

Geared motor

---- ----

When ordering an end carriage and geared motor as a complete unitEx. Overhead end carriage 1 t span 12 m, traveling speed 20 m/min and electric voltage 380 V 50 Hz.

Traveling speed 20 m/min

Voltage 380 V

EO010-12-S-Z shown on page 18

Complete unit

16 17

Type

Mot

oriz

edU

reth

ane

Whe

el T

ype

Ove

rhea

dLo

w-h

ead

Ove

rhea

d

Dou

ble

Gird

er

Ove

rhea

dU

reth

ane

Whe

elTy

peLo

w-

head

Span (m)

1

2

3

5

7.5

10

1

2

3

5

1

2

3

5

7.5

10

1

2

3

5

7.5

10

15

20

3

5

7.5

10

15

20

G1MO025□-□

G1MO025□-□

G1ML025□-□

G1ML025□-□

G1ML025□-□

G1MO025□-□

G1MO040□-□

G1MO075□-□

G1MO150□-□

G1ML025□-□

G1MO075□-□

G1MO150T-□

G1MO150□-□

G1MO150□-□

G1MO150□-□

G1MO150□-□x2

G1MO150□-□x2

G1MO150□-□x2

G1MO025□-□

G1MO025□-□

G1MO075□-□

G1MO150T-□

G1ML040□-□

G1MO040□-□

G1MO150□-□

G1MO150□-□

G1MO025□-□G1MO040T-□

G1MO025□-□G1MO040T-□

G1MO075□-□G1MO150T-□

G1MO075□-□G1MO150T-□

G1MO025□-□G1MO040T-□

G1MO025□-□G1MO040T-□

G1MO040□-□G1MO075T-□

G1MO075□-□G1MO150T-□

G1MO075□-□G1MO150T-□

G1MO075□-□G1MO150T-□

G1MO150□-□G1MO150□-□x2

G1MO150□-□G1MO150□-□x2

G1MO150□-□G1MO150□-□x2

G1ML040□-□G1ML075T-□

G1ML025□-□ G1ML040T-□

G1MO040□-□G1MO075T-□

G1MO040□-□ G1MO075T-□G1MO075□-□G1MO150T-□G1MO075□-□G1MO150T-□

G1ML040□-□G1ML075T-□

W.L.L.(t) 3 6 9 12 15 18 21 27

G1ML075□-□

* *

G1ML025□-□

G1ML025□-□

G1ML025□-□

G1ML025□-□

G1MO150□-□x2

G1MO150□-□x2

G1MO150□-□x2 G1MO150□-□x2

G1MO150□-□

G1MO150□-□

G1MO150□-□

G1MO075□-□

G1MO075□-□

G1MO075□-□

G1M150T-□

G1MO025□-□

G1MO040T-□

Available onyour request

Available onyour request

GEARED MOTOR CAPACITY

•KITO cranes employ a geared motor with an electromagnetic brake. Brake torque is adjustable from 0 to 50% (for 0.25 kW :from 30 to 80%) of the rated torque of the motor, thus the load swing can be minimized by adjusting the brake torque.

•The motor uses a helical gear, which reduces noise during operation.

•SOFTRUN devices are available to provide smooth starts and minimize swing.

•Motors are available in three different single speed (10/12, 20/24, and 30/36 m/min 50/60 Hz) types and one dual speed (20/5 24/6 m/min 50/60 Hz) type (reduction ratio of 4:1) and they make work more efficient.

G1MO025 L-E

EO010-12

---------- --- --------

---- ---- ----

--- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)

SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)

Speed (50/60Hz)

E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz

380 V/50 Hz, 380-460 V/60 Hz

E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz

380 V/50 Hz, 380-460 V/60 HzPower sources

025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW

Motor outputs (50/60Hz)

G1MO040 T-Z---------- --- -------- --- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

T: 30/36 m/mim (High speed)Speed (50/60Hz)

Power sources

040: (0.25)+0.34/0.4 kW075: (0.4)+0.63/0.75 kW150: (0.75)+1.25/1.5 kW

Motor outputs

Features of geared motors

How to read types (example)

How to order end carriages (example)

When ordering an end carriage and geared motor separately

• 1.5 kWx2 means 2 geared motors are used on 1 end carriage (on side): 4 driving motor type.

• For dual listings, models on the upper line are the low, standard and dual speeds end carriages, whereas models on the lower line are the high speed end carriages. Single listings show the low, standard, high and dual speed end carriages.

• *Available on request ( 2.2 kWx2 for 30/36 m/min. speed).

• W.L.L.: Working Load Limit (t).

Ex. Overhead end carriage 1 t span 12 m. Geared motor for traveling speed 20 m/min, motor output 0.25 kW, and electric voltage 380 V 50 Hz.

Overhead

Standard speed 20 m/min

Voltage 380 V

End carriageshown on page 18

G1MO025S-Z shown on page 26

Geared motor

---- ----

When ordering an end carriage and geared motor as a complete unitEx. Overhead end carriage 1 t span 12 m, traveling speed 20 m/min and electric voltage 380 V 50 Hz.

Traveling speed 20 m/min

Voltage 380 V

EO010-12-S-Z shown on page 18

Complete unit

18 19

9

12

15

18

21

9

12

15

18

21

9

12

15

18

21

9

12

15

18

21

12

18

21

12

18

21

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Recommendedwheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

A B D E F N Y

7.8

14.7

33.3

14.7

33.3

41.2

61.7

81.3

7.4

13.9

25.0

13.9

25.0

31.0

46.2

60.0

155

175

220

175

220

260

340

440

1586

1696

2356

2792

1696

2082

2422

2792

2082

2422

2792

1852

2402

2821

2081

2421

2821

2081

2849

1307

1445

2105

2499

1445

1761

2101

2499

1761

2101

2499

1531

2106

2506

1766

2106

2506

1766

2509

800

900

1200

1400

900

1000

1200

1400

1000

1200

1400

900

1200

1400

900

1200

1400

900

1400

110

131

155

131

155

153

184

177

184

177

234

32

39

32

39

46

317

383

460

383

460

559

553

592

188

233

239

188

239

279

239

279

239

346

156

202

265

502

202

384

398

502

384

398

502

355

543

665

525

627

665

525

1027

100·125·150

150·175·200

200·250

1

2

3

5

7.5

10

W.L.L.(t)

☆CEO010- 9

☆CEO010-12

CEO010-15

CEO010-18

CEO010-21

CEO020- 9

☆CEO020-12

CEO020-15

CEO020-18

CEO020-21

CEO030- 9

CEO030-12

CEO030-15

CEO030-18

CEO030-21

CEO050- 9

☆CEO050-12

CEO050-15

CEO050-18

CEO050-21

☆CEO075-12

CEO075-18

CEO075-21

☆CEO100-12

CEO100-18

☆CEO100-21

*5*4

*2*1 *3

(1220)

0.21/0.25 0.21/0.25

0.34/0.4 0.34/0.4

0.63/0.75

0.21/0.25

0.34/0.4

0.34/0.4

0.63/0.75

0.63/0.75

1.25/1.5

0.21/0.25

0.34/0.4

0.34/0.4

0.63/0.75

0.63/0.75

1.25/1.5

0.21/0.25

0.34/0.4

0.34/0.4

0.63/0.75

0.63/0.75

1.25/1.5

1.25/1.5x2

0.63/0.75

0.63/0.75

0.34/0.4

0.21/0.25

0.34/0.4

0.21/0.25

1.25/1.5

0.34:0.084/0.4:0.1

0.21:0.053/0.25:0.063

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19

0.63:0.16/0.75:0.19

9

12

18

21

9

12

18

21

9

12

18

21

9

12

18

21

12

18

21

12

18

21

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA B D E F N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

L

10/12 20/24 30/36 20:5/24:6

S H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

9.31

17.6

31.4

17.6

31.4

20.6

23.5

31.4

44.1

73.5

79.4

73.5

79.4

95

125

175

125

175

140

155

175

210

250

300

250

300

1580

2280

2691

1580

2280

2691

1580

2280

2691

1490

2296

2696

1645

2345

2745

1645

2345

2745

1400

2100

2505

1400

2100

2505

1400

2100

2505

1300

2100

2500

1405

2105

2505

1405

2105

2505

900

1200

1400

900

1200

1400

900

1200

1400

800

1200

1400

900

1200

1400

900

1200

1400

109

124

144

114

124

144

114

149

144

124

138

163

138

163

183

138

163

183

15.5

20.5

23.5

321

325

326

325

326

325

326

323

376

445

119

123

119

123

143

162

171

191

221

176

221

176

221

224

264

224

264

324

224

264

324

132

197

380

146

212

380

150

252

380

197

374

496

384

586

724

384

586

724

1

2

3

5

7.5

10

W.L.L.(t)

□32·□40□38·□45

□32·□40□38·□45

*2*1

□45·□50

□45·□50

□50

□55·□60

EO010- 9

☆EO010-12

EO010-18

EO010-21

EO020- 9

☆EO020-12

EO020-18

EO020-21

EO030- 9

☆EO030-12

EO030-18

EO030-21

☆EO050- 9

EO050-12

EO050-18

EO050-21

☆EO075-12

EO075-18

EO075-21

☆EO100-12

EO100-18

EO100-21

-

B

Frame

Geared motor

Track wheelTrack wheel

FrameTraveling rail

(H-beam)Side roller Ground parts

(one side frame only)

Side rollerSquare rail

AE

X

N E N

D

BGeared motor

A

D

F

Y

F

Y

END CARRIAGE SPECIFICATIONS

Motorized Overhead End Carriage Specifications Urethane Wheel Motorized Overhead End Carriage Specifications

Ex. Above photo shows EO030-12Some types of motors are mounted in parallel on the frames.

Ex. Above photo shows EO030-15Some types of motors are mounted in parallel on the frames.

•W.L.L.: Working Load Limit (t). •Weight in parentheses is for high speed (H). *1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure. *4: The size including the projection of the side roller plate. *5: The size with the standard speed (s) geared motor. ☆: Geared motors installed in diagonal positions as shown in the above photo. •When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.☆: Geared motors installed in diagonal positions as shown in the above photo.•When planning a girder or cart, contact your nearest Kito distributor.

18 19

9

12

15

18

21

9

12

15

18

21

9

12

15

18

21

9

12

15

18

21

12

18

21

12

18

21

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Recommendedwheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

A B D E F N Y

7.8

14.7

33.3

14.7

33.3

41.2

61.7

81.3

7.4

13.9

25.0

13.9

25.0

31.0

46.2

60.0

155

175

220

175

220

260

340

440

1586

1696

2356

2792

1696

2082

2422

2792

2082

2422

2792

1852

2402

2821

2081

2421

2821

2081

2849

1307

1445

2105

2499

1445

1761

2101

2499

1761

2101

2499

1531

2106

2506

1766

2106

2506

1766

2509

800

900

1200

1400

900

1000

1200

1400

1000

1200

1400

900

1200

1400

900

1200

1400

900

1400

110

131

155

131

155

153

184

177

184

177

234

32

39

32

39

46

317

383

460

383

460

559

553

592

188

233

239

188

239

279

239

279

239

346

156

202

265

502

202

384

398

502

384

398

502

355

543

665

525

627

665

525

1027

100·125·150

150·175·200

200·250

1

2

3

5

7.5

10

W.L.L.(t)

☆CEO010- 9

☆CEO010-12

CEO010-15

CEO010-18

CEO010-21

CEO020- 9

☆CEO020-12

CEO020-15

CEO020-18

CEO020-21

CEO030- 9

CEO030-12

CEO030-15

CEO030-18

CEO030-21

CEO050- 9

☆CEO050-12

CEO050-15

CEO050-18

CEO050-21

☆CEO075-12

CEO075-18

CEO075-21

☆CEO100-12

CEO100-18

☆CEO100-21

*5*4

*2*1 *3

(1220)

0.21/0.25 0.21/0.25

0.34/0.4 0.34/0.4

0.63/0.75

0.21/0.25

0.34/0.4

0.34/0.4

0.63/0.75

0.63/0.75

1.25/1.5

0.21/0.25

0.34/0.4

0.34/0.4

0.63/0.75

0.63/0.75

1.25/1.5

0.21/0.25

0.34/0.4

0.34/0.4

0.63/0.75

0.63/0.75

1.25/1.5

1.25/1.5x2

0.63/0.75

0.63/0.75

0.34/0.4

0.21/0.25

0.34/0.4

0.21/0.25

1.25/1.5

0.34:0.084/0.4:0.1

0.21:0.053/0.25:0.063

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19

0.63:0.16/0.75:0.19

9

12

18

21

9

12

18

21

9

12

18

21

9

12

18

21

12

18

21

12

18

21

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA B D E F N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

L

10/12 20/24 30/36 20:5/24:6

S H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

9.31

17.6

31.4

17.6

31.4

20.6

23.5

31.4

44.1

73.5

79.4

73.5

79.4

95

125

175

125

175

140

155

175

210

250

300

250

300

1580

2280

2691

1580

2280

2691

1580

2280

2691

1490

2296

2696

1645

2345

2745

1645

2345

2745

1400

2100

2505

1400

2100

2505

1400

2100

2505

1300

2100

2500

1405

2105

2505

1405

2105

2505

900

1200

1400

900

1200

1400

900

1200

1400

800

1200

1400

900

1200

1400

900

1200

1400

109

124

144

114

124

144

114

149

144

124

138

163

138

163

183

138

163

183

15.5

20.5

23.5

321

325

326

325

326

325

326

323

376

445

119

123

119

123

143

162

171

191

221

176

221

176

221

224

264

224

264

324

224

264

324

132

197

380

146

212

380

150

252

380

197

374

496

384

586

724

384

586

724

1

2

3

5

7.5

10

W.L.L.(t)

□32·□40□38·□45

□32·□40□38·□45

*2*1

□45·□50

□45·□50

□50

□55·□60

EO010- 9

☆EO010-12

EO010-18

EO010-21

EO020- 9

☆EO020-12

EO020-18

EO020-21

EO030- 9

☆EO030-12

EO030-18

EO030-21

☆EO050- 9

EO050-12

EO050-18

EO050-21

☆EO075-12

EO075-18

EO075-21

☆EO100-12

EO100-18

EO100-21

-

B

Frame

Geared motor

Track wheelTrack wheel

FrameTraveling rail

(H-beam)Side roller Ground parts

(one side frame only)

Side rollerSquare rail

AE

X

N E N

D

BGeared motor

A

D

F

Y

F

Y

END CARRIAGE SPECIFICATIONS

Motorized Overhead End Carriage Specifications Urethane Wheel Motorized Overhead End Carriage Specifications

Ex. Above photo shows EO030-12Some types of motors are mounted in parallel on the frames.

Ex. Above photo shows EO030-15Some types of motors are mounted in parallel on the frames.

•W.L.L.: Working Load Limit (t). •Weight in parentheses is for high speed (H). *1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure. *4: The size including the projection of the side roller plate. *5: The size with the standard speed (s) geared motor. ☆: Geared motors installed in diagonal positions as shown in the above photo. •When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.☆: Geared motors installed in diagonal positions as shown in the above photo.•When planning a girder or cart, contact your nearest Kito distributor.

20 21

15

21

27

15

21

27

15

21

27

15

21

27

15

21

27

15

21

27

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA B D E F N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

31.4

44.1

73.5

79.4

73.5

82.3

100

131

162

175

210

250

300

350

400

450

2615

2845

3395

2845

3095

3425

3098

3478

3098

3288

3698

4028

4528

2400

2630

3180

2630

2855

3185

2855

3235

2855

3045

3430

3760

4260

1995

2195

2140

2195

2390

2590

2395

2740

2395

2540

2840

3150

3500

124

128

134

138

150

23.5

27.5

325

375

444

445

529

530

531

143

162

189

224

274

324

274

324

328

408

382

449

504

449

554

736

686

799

686

828

1136

1448

1945

□50

□55·□60

□55·□60·□65

3

5

7.5

10

15

20

W.L.L.(t)

WEO030-15

WEO030-21

WEO030-27

WEO050-21

WEO050-21

WEO050-27

WEO075-15

WEO075-21

WEO075-27

WEO100-15

WEO100-21

WEO100-27

WEO100-15

WEO150-21

WEO150-27

WEO200-15

WEO200-21

WEO200-27

*2*1

15

21

27

15

21

27

15

21

27

15

21

27

15

21

27

27

15

15

21

21

27

27

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Recommendedwheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA B D E F N Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

0.63/0.75

1.25/1.5

1.25/1.5x2

1.25/1.5

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

0.63/0.75

1.25/1.5

1.25/1.5x2

1.25/1.5

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

33.3

41.2

43.1

41.2

61.7

41.2

61.7

41.2

43.1

41.2

43.1

61.7

81.3

25.0

31.0

32.3

31.0

46.2

31.0

46.2

31.0

32.3

31.0

32.3

46.2

60.0

220

260

300

260

340

260x2

340

260x2

300x2

260x2

300x2

340x2

440x2

2851

3111

3211

3111

3091

3771

3091

3771

4059

3771

4059

4412

3992

4412

5172

5292

4742

4872

5172

5292

5422

5552

2539

2796

2896

2796

2776

3456

2776

3456

3701

3456

3701

4063

3643

4063

4823

4943

4393

4523

4823

4943

5073

5203

2085

2295

2140

2295

2230

2700

2230

2700

2900

2700

2900

3220

2790

3220

3800

3840

3380

3420

3800

3840

4070

4110

155

153

163

153

177

149

177

149

159

149

159

180

212

39

46

39

46

459

560

564

560

553

559

553

559

564

559

564

554

593

709

593

709

593

709

593

709

239

289

239

289

346

289

346

426

346

426

524

653

881

653

930

1160

930

1160

1438

1160

1438

1672

1378

1672

2575

2696

2214

2332

2575

2696

2944

3067

1.25/1.5

1.25/1.5x2

1.25/1.5

1.25/1.5x2

—

2.2x2

—

2.2x2

—

2.2x2

—

2.2x2

150·175·200

175·200

150·175·200

175·200

200·250

250·300

3

5

7.5

10

15

20

W.L.L.(t)

CWEO030-15

CWEO030-21

CWEO030-27

CWEO050-15

CWEO050-21

CWEO050-27

CWEO075-15

CWEO075-21

CWEO075-27

CWEO100-15

CWEO100-21

CWEO100-27

CWEO150-15

CWEO150-21

CWEO150-27

CWEO150-27H

CWEO200-15

CWEO200-15H

CWEO200-21

CWEO200-21H

CWEO200-27

CWEO200-27H

*5*4

*2*1 *3

(1588)

(2083)

0.21/0.25 0.21/0.25 0.34/0.4

0.63/0.750.34/0.4 0.34/0.4

0.63/0.75 0.63/0.75

1.25/1.5

1.25/1.5x21.25/1.5 1.25/1.5 -

0.21:0.053/0.25:0.063

0.63:0.16/0.75:0.19

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19

—

B

Frame

Geared motor

B

AE ND

Geared motor

B

AE ND

Geared motor

Track wheelSide rollerSquare rail

AE

X

ND

F

Y

F

Y

F

Y

FrameTrack wheelTraveling rail(H-beam) Side roller

Ground parts(one side frame only)

FrameTrack wheelTraveling rail(H-beam)

Side roller Ground parts(one side frame only)

END CARRIAGE SPECIFICATIONS

Motorized Overhead Double Girder End Carriage Specifications Urethane Wheel Motorized Overhead Double Girder End Carriage Specifications

One motor drive type

Two motor drive type ( )

•W.L.L.: Working Load Limit (t).•Weights in parentheses are for high speed (H).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor. •W.L.L.: Working Load Limit (t).

*1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure.*4: The size including the projection of the side roller plate.*5: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor.

20 21

15

21

27

15

21

27

15

21

27

15

21

27

15

21

27

15

21

27

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA B D E F N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

31.4

44.1

73.5

79.4

73.5

82.3

100

131

162

175

210

250

300

350

400

450

2615

2845

3395

2845

3095

3425

3098

3478

3098

3288

3698

4028

4528

2400

2630

3180

2630

2855

3185

2855

3235

2855

3045

3430

3760

4260

1995

2195

2140

2195

2390

2590

2395

2740

2395

2540

2840

3150

3500

124

128

134

138

150

23.5

27.5

325

375

444

445

529

530

531

143

162

189

224

274

324

274

324

328

408

382

449

504

449

554

736

686

799

686

828

1136

1448

1945

□50

□55·□60

□55·□60·□65

3

5

7.5

10

15

20

W.L.L.(t)

WEO030-15

WEO030-21

WEO030-27

WEO050-21

WEO050-21

WEO050-27

WEO075-15

WEO075-21

WEO075-27

WEO100-15

WEO100-21

WEO100-27

WEO100-15

WEO150-21

WEO150-27

WEO200-15

WEO200-21

WEO200-27

*2*1

15

21

27

15

21

27

15

21

27

15

21

27

15

21

27

27

15

15

21

21

27

27

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Recommendedwheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA B D E F N Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

0.63/0.75

1.25/1.5

1.25/1.5x2

1.25/1.5

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

0.63/0.75

1.25/1.5

1.25/1.5x2

1.25/1.5

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

1.25/1.5x2

—

33.3

41.2

43.1

41.2

61.7

41.2

61.7

41.2

43.1

41.2

43.1

61.7

81.3

25.0

31.0

32.3

31.0

46.2

31.0

46.2

31.0

32.3

31.0

32.3

46.2

60.0

220

260

300

260

340

260x2

340

260x2

300x2

260x2

300x2

340x2

440x2

2851

3111

3211

3111

3091

3771

3091

3771

4059

3771

4059

4412

3992

4412

5172

5292

4742

4872

5172

5292

5422

5552

2539

2796

2896

2796

2776

3456

2776

3456

3701

3456

3701

4063

3643

4063

4823

4943

4393

4523

4823

4943

5073

5203

2085

2295

2140

2295

2230

2700

2230

2700

2900

2700

2900

3220

2790

3220

3800

3840

3380

3420

3800

3840

4070

4110

155

153

163

153

177

149

177

149

159

149

159

180

212

39

46

39

46

459

560

564

560

553

559

553

559

564

559

564

554

593

709

593

709

593

709

593

709

239

289

239

289

346

289

346

426

346

426

524

653

881

653

930

1160

930

1160

1438

1160

1438

1672

1378

1672

2575

2696

2214

2332

2575

2696

2944

3067

1.25/1.5

1.25/1.5x2

1.25/1.5

1.25/1.5x2

—

2.2x2

—

2.2x2

—

2.2x2

—

2.2x2

150·175·200

175·200

150·175·200

175·200

200·250

250·300

3

5

7.5

10

15

20

W.L.L.(t)

CWEO030-15

CWEO030-21

CWEO030-27

CWEO050-15

CWEO050-21

CWEO050-27

CWEO075-15

CWEO075-21

CWEO075-27

CWEO100-15

CWEO100-21

CWEO100-27

CWEO150-15

CWEO150-21

CWEO150-27

CWEO150-27H

CWEO200-15

CWEO200-15H

CWEO200-21

CWEO200-21H

CWEO200-27

CWEO200-27H

*5*4

*2*1 *3

(1588)

(2083)

0.21/0.25 0.21/0.25 0.34/0.4

0.63/0.750.34/0.4 0.34/0.4

0.63/0.75 0.63/0.75

1.25/1.5

1.25/1.5x21.25/1.5 1.25/1.5 -

0.21:0.053/0.25:0.063

0.63:0.16/0.75:0.19

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19

—

B

Frame

Geared motor

B

AE ND

Geared motor

B

AE ND

Geared motor

Track wheelSide rollerSquare rail

AE

X

ND

F

Y

F

Y

F

Y

FrameTrack wheelTraveling rail(H-beam) Side roller

Ground parts(one side frame only)

FrameTrack wheelTraveling rail(H-beam)

Side roller Ground parts(one side frame only)

END CARRIAGE SPECIFICATIONS

Motorized Overhead Double Girder End Carriage Specifications Urethane Wheel Motorized Overhead Double Girder End Carriage Specifications

One motor drive type

Two motor drive type ( )

•W.L.L.: Working Load Limit (t).•Weights in parentheses are for high speed (H).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor. •W.L.L.: Working Load Limit (t).

*1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure.*4: The size including the projection of the side roller plate.*5: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor.

22 23

6

9

12

15

6

9

12

15

6

9

12

15

6

9

12

15

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA D M U N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.63/0.75

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.63/0.75

34

40

36

40

36

38

40

39

288+T/2

336+T/2

288+T/2

336+T/2

288+T/2

336+T/2

399+T/2

121

174

138

165

174

165

162

174

201

1

2

3

5

W.L.L.(t)

EL010- 6

EL010- 9

EL010-12

EL030-15

EL020- 6

EL020- 9

EL020-12

EL030-15

EL030- 6

EL030- 9

EL030-12

EL030-15

EL050- 6

EL050- 9

EL050-12

EL050-15

*1 *2

9

9

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Recommendedwheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA D M U N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

0.21/0.25

0.34/0.4

3.8

6.7

3.6

6.3

95

1251500 1060

T+171

T+211

34

35

T/2+288

T/2+336

241-T/2

281-T/2

121

165

143

231

0.21/0.25

0.34/0.4125·150

1

2

W.L.L.(t)

CEL010-9

CEL020-9

*4*3

*1 *2

95

140

110

140

110

125

140

155

4.51

15.7

9.31

15.7

9.31

10.5

15.7

17.6

75·100·125·150

125·150

100·125·150

125·150

100·125·150

125·150

132

150

164

340

152

172

202

340

160

234

340

270

432

241-T/2

281-T/2

290-T/2

1140

1500

1840

2200

1140

1500

1840

2200

1140

1840

2200

1500

2200

700

1060

1400

1760

700

1060

1400

1760

700

1400

1760

1060

1760

T+171

T+231

T+191

T+231

T+191

T+241

T+231

T+211

T+279

0.34/0.4(B)0.21/0.25(E,Z)

0.63/0.75(B,Z)0.34/0.4(E)

0.34/0.4(B)0.21/0.25(E,Z)

0.63/0.75(B,Z)0.34/0.4(E)0.34/0.4(B)

0.21/0.25(E,Z)

0.34/0.4

0.63/0.75(B,Z)0.34/0.4(E)

0.63/0.75

0.34/0.4(B)0.21/0.25(E,Z)

0.63/0.75

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.63/0.75(E)

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19(E,Z)

AT

M

X

D

Geared motor

Y

U

Frame

Track wheel

Stay holder

Traveling rail(I-beam)

A

M

X

T

D

Geared motor

Y

U

Ground parts(one side frame only)

Frame

Track wheel

Stay holder

Traveling rail(I-beam)

END CARRIAGE SPECIFICATIONS

Motorized Low-head End Carriage Specifications Urethane Wheel Motorized Low-head End Carriage Specifications

•W.L.L.: Working Load Limit (t).*1: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*2: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure

the same as or less than the recommended wheel pressure.*3: The size including the projection of the side roller plate.*4: The size with the standard speed (s) geared motor.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)

•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz

Track wheel and track wheel axle constructionWith respect to a low-head end carriage, both the track wheel and track wheel axle are designed for easy detaching, thus reducing installation and maintenance time.

End carriage frame

Tap

Track wheel assembly

Track wheel axle assembly

Bolt

Bolt

•W.L.L.: Working Load Limit (t).*1: The size with the standard speed (s) geared motor.*2: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz

22 23

6

9

12

15

6

9

12

15

6

9

12

15

6

9

12

15

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA D M U N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.63/0.75

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.21/0.25

0.34/0.4

0.63/0.75

34

40

36

40

36

38

40

39

288+T/2

336+T/2

288+T/2

336+T/2

288+T/2

336+T/2

399+T/2

121

174

138

165

174

165

162

174

201

1

2

3

5

W.L.L.(t)

EL010- 6

EL010- 9

EL010-12

EL030-15

EL020- 6

EL020- 9

EL020-12

EL030-15

EL030- 6

EL030- 9

EL030-12

EL030-15

EL050- 6

EL050- 9

EL050-12

EL050-15

*1 *2

9

9

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Recommendedwheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

L

10/12 20/24 30/36 20:5/24:6

SA D M U N X Y

H SD

Traveling motor output (kWx2)50/60 Hz (m/min)

0.21/0.25

0.34/0.4

3.8

6.7

3.6

6.3

95

1251500 1060

T+171

T+211

34

35

T/2+288

T/2+336

241-T/2

281-T/2

121

165

143

231

0.21/0.25

0.34/0.4125·150

1

2

W.L.L.(t)

CEL010-9

CEL020-9

*4*3

*1 *2

95

140

110

140

110

125

140

155

4.51

15.7

9.31

15.7

9.31

10.5

15.7

17.6

75·100·125·150

125·150

100·125·150

125·150

100·125·150

125·150

132

150

164

340

152

172

202

340

160

234

340

270

432

241-T/2

281-T/2

290-T/2

1140

1500

1840

2200

1140

1500

1840

2200

1140

1840

2200

1500

2200

700

1060

1400

1760

700

1060

1400

1760

700

1400

1760

1060

1760

T+171

T+231

T+191

T+231

T+191

T+241

T+231

T+211

T+279

0.34/0.4(B)0.21/0.25(E,Z)

0.63/0.75(B,Z)0.34/0.4(E)

0.34/0.4(B)0.21/0.25(E,Z)

0.63/0.75(B,Z)0.34/0.4(E)0.34/0.4(B)

0.21/0.25(E,Z)

0.34/0.4

0.63/0.75(B,Z)0.34/0.4(E)

0.63/0.75

0.34/0.4(B)0.21/0.25(E,Z)

0.63/0.75

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.63/0.75(E)

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.21:0.053/0.25:0.063

0.34:0.084/0.4:0.1

0.63:0.16/0.75:0.19(E,Z)

AT

M

X

D

Geared motor

Y

U

Frame

Track wheel

Stay holder

Traveling rail(I-beam)

A

M

X

T

D

Geared motor

Y

U

Ground parts(one side frame only)

Frame

Track wheel

Stay holder

Traveling rail(I-beam)

END CARRIAGE SPECIFICATIONS

Motorized Low-head End Carriage Specifications Urethane Wheel Motorized Low-head End Carriage Specifications

•W.L.L.: Working Load Limit (t).*1: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*2: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure

the same as or less than the recommended wheel pressure.*3: The size including the projection of the side roller plate.*4: The size with the standard speed (s) geared motor.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)

•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz

Track wheel and track wheel axle constructionWith respect to a low-head end carriage, both the track wheel and track wheel axle are designed for easy detaching, thus reducing installation and maintenance time.

End carriage frame

Tap

Track wheel assembly

Track wheel axle assembly

Bolt

Bolt

•W.L.L.: Working Load Limit (t).*1: The size with the standard speed (s) geared motor.*2: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz

24 25

9

12

9

12

9

12

9

12

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

9.31

17.6

20.6

44.1

99

130

156

224

□45·□50

□50

1

2

3

5

W.L.L.(t)

GO010- 9

GO010-12

GO020- 9

GO020-12

GO030-9

GO030-12

GO050-9

GO050-12

*2*1

95

125

140

210

A B

1400

D

900

E

100

120

135

119

J

247

252

257

F

15.5

18.5

1580

1590

H

507

509

521

561

X

119

123

143

Y

147

172

202

205

□32·□38□40·□45

6

12

6

12

6

12

6

12

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

4.5

9.31

10.78

15.7

17.6

106

139

142

166

162

202

226

292

75·100·125·150

100·125·150

125·150

1

2

3

5

W.L.L.(t)

GL010- 6

GL010-12

GL020- 6

GL020-12

GL030- 6

GL030-12

GL050- 6

GL050-12

95

110

125

140

155

A

1390

1840

1480

1840

1480

1840

1480

1840

D

950

1400

1030

1400

880

1400

850

1400

H

490

715

530

715

531.3

599.2

539

579

J

T/2+228

T/2+221

T/2+222

T/2+225

T/2+234

J

241-T/2

281-T/2

315-T/2

M

T+171

T+211

T+191

T+201

T+221

T+231

T+211

T+249

U

34

36

38

40

39

*1Y

121

138

145

165

177

174

188

3

6

6

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

1.76

3.5

27

45

75·100

75·100·125

0.5

1

W.L.L.(t)

PL005-3

PL010-6

PL010-6

71

85

A

470

830

B

—

D

350

700

X

206-T/2

M

T+157

T+161

U

25

31

*Y

89

106

9

9

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

3.92 7175·100·1250.5

1

W.L.L.(t)

PL010-9

PL010-995

A

1150

B

1050

D

650

X

212-T/2

M

T+174

U

26

*Y

95

A

BAD

A

Y

U

Y

U

MX

MX

T

T

D

ABD

FH

E J

DAD

H H

TT

M MX J X J

Y

UY

U

Frame FrameTrack wheel

Track wheel

Hand wheelHand wheel

Traveling rail

Traveling rail

Traveling rail

Track wheel Frame

Frame

Track wheelSide roller

Traveling rail

Stay holderStay holder

Y

Square rail Hand wheel Frame

Connecting plate

Connecting plate

Track wheel Side rollerX

END CARRIAGE SPECIFICATIONS

Geared Overhead End Carriage Specifications

Geared Low-head End Carriage Specifications

Plain Low-head End Carriage SpecificationsNo side rollers for 0.5 t (max. span 6 m) and 1 t (max. span 6 m)

Plain Low-head End Carriage SpecificationsSide rollers for 0.5 t and 1 t (max. span 6 m)

1 to 2 t 3 to 5 t

•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The height from the track surface of the traveling rail to the top of the end carriage.•When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*1: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.

24 25

9

12

9

12

9

12

9

12

Max.span(m)

Applicablesquare

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

9.31

17.6

20.6

44.1

99

130

156

224

□45·□50

□50

1

2

3

5

W.L.L.(t)

GO010- 9

GO010-12

GO020- 9

GO020-12

GO030-9

GO030-12

GO050-9

GO050-12

*2*1

95

125

140

210

A B

1400

D

900

E

100

120

135

119

J

247

252

257

F

15.5

18.5

1580

1590

H

507

509

521

561

X

119

123

143

Y

147

172

202

205

□32·□38□40·□45

6

12

6

12

6

12

6

12

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

4.5

9.31

10.78

15.7

17.6

106

139

142

166

162

202

226

292

75·100·125·150

100·125·150

125·150

1

2

3

5

W.L.L.(t)

GL010- 6

GL010-12

GL020- 6

GL020-12

GL030- 6

GL030-12

GL050- 6

GL050-12

95

110

125

140

155

A

1390

1840

1480

1840

1480

1840

1480

1840

D

950

1400

1030

1400

880

1400

850

1400

H

490

715

530

715

531.3

599.2

539

579

J

T/2+228

T/2+221

T/2+222

T/2+225

T/2+234

J

241-T/2

281-T/2

315-T/2

M

T+171

T+211

T+191

T+201

T+221

T+231

T+211

T+249

U

34

36

38

40

39

*1Y

121

138

145

165

177

174

188

3

6

6

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

1.76

3.5

27

45

75·100

75·100·125

0.5

1

W.L.L.(t)

PL005-3

PL010-6

PL010-6

71

85

A

470

830

B

—

D

350

700

X

206-T/2

M

T+157

T+161

U

25

31

*Y

89

106

9

9

Max.span(m)

Applicabletraveling

rail(mm)

Max.wheel

pressure(kN)

Mass(kg/set)

Wheeldiameter

(mm)Type

Dimensions (mm)

3.92 7175·100·1250.5

1

W.L.L.(t)

PL010-9

PL010-995

A

1150

B

1050

D

650

X

212-T/2

M

T+174

U

26

*Y

95

A

BAD

A

Y

U

Y

U

MX

MX

T

T

D

ABD

FH

E J

DAD

H H

TT

M MX J X J

Y

UY

U

Frame FrameTrack wheel

Track wheel

Hand wheelHand wheel

Traveling rail

Traveling rail

Traveling rail

Track wheel Frame

Frame

Track wheelSide roller

Traveling rail

Stay holderStay holder

Y

Square rail Hand wheel Frame

Connecting plate

Connecting plate

Track wheel Side rollerX

END CARRIAGE SPECIFICATIONS

Geared Overhead End Carriage Specifications

Geared Low-head End Carriage Specifications

Plain Low-head End Carriage SpecificationsNo side rollers for 0.5 t (max. span 6 m) and 1 t (max. span 6 m)

Plain Low-head End Carriage SpecificationsSide rollers for 0.5 t and 1 t (max. span 6 m)

1 to 2 t 3 to 5 t

•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The height from the track surface of the traveling rail to the top of the end carriage.•When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*1: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.

•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.

b e

*f

*yh

g

c

øi

øi

n-øz

n-øz

a d

b c ea d

*f

*yh

g

Pinion *Flange thickness of the Geared motor at the fixing holes (n-øz) are 18 mm.

*f and y show distances from pinion center to both ends.

*Flange thickness of the Geared motor at the fixing holes (n-øz) are 17 mm.

*f and y show distances from pinion center to both ends.

Pinion

Adjusting bolt

Lock nut

Spring holder

Brake spring

26 27

Power source

Motor output(kW) Mass

(kg/set)Overhead Low-headOverhead50 Hz 60 Hz

Motor output(kW)

50 Hz 60 Hz

Low-head

Type PolePower source

Dimensions (mm)

G1M□025L-□G1M□025S-□G1M□025H-□

G1M□025SD-□

G1M□040T-□G1M□040L-□G1M□040S-□G1M□040H-□G1M□040SD-□G1M□075T-□

0.21

0.21:0.053

0.34

0.34:0.084

0.63

0.25

0.25:0.063

0.4

0.4:0.1

0.75

4

2/8

4

2/8

4

B,E,Z

E

B,E,Z

E

B,E,Z

B,E,Z

E,Z

B,E,Z

E

B,E,Z

E,Z

E

B,E,Z

E

E,Z

—

B,E,Z

E,Z

B,E,Z

E

B,E,Z

290

324

339

300

335

346

281

315

291

330

341

34

25

29

142

156

146

161

193

215

67

82.2

67

70.6

72

75.2

78

92.6

78

60

70

57

66

4 9

11

17.5

19

15.5

15

14

15

16.5

17

56

74

0

0

-0.046

-0.046

256

290

305

266

301

312

a

Overhead Low-head

cd e f y g h øi n øzb

Motor output(kW)Type

*Travelingspeed (m/min)

*Motorrevolutions

(r.p.m)*Revolutions

(r.p.m)

Pinion

Tooth surface strength (kg)

G1M□025L-□G1M□025S-□G1M□025H-□G1M□040T-□

G1M□025SD-□

G1M□040L-□G1M□040S-□G1M□040H-□G1M□075T-□

G1M□040SD-□

G1M□075L-□G1M□075S-□G1M□075H-□G1M□150T-□

G1M□075SD-□

G1MO150L-□G1MO150S-□G1MO150H-□

0.21

0.34

0.053

0.21

0.34

0.63

0.084

0.34

0.63

1.25

0.16

0.63

1.25

0.25

0.4

0.063

0.25

0.4

0.75

0.1

0.4

0.75

1.5

0.19

0.75

1.5

10

20

30

5

20

10

20

30

5

20

10

20

30

5

20

10

20

30

12

24

36

6

24

12

24

36

6

24

12

24

36

6

24

12

24

36

1410

1430

730

2960

1430

1415

730

2890

1415

1440

720

2890

1440

1650

1700

870

3530

1700

1670

860

3420

1670

1700

860

3440

1700

155

314

463

469

80

325

132

255

382

378

68

266

77

146

224

218

39

157

65

127

192

181

367

541

557

91

387

156

302

453

445

79

314

91

173

253

256

47

187

77

149

227

158

78

53

83

77

75

247

128

86

162

121

123

527

278

182

372

263

259

1022

522

345

134

66

45

70

67

63

208

107

72

137

103

446

235

160

317

219

217

862

446

292

105

52

35

59

51

50

165

85

57

108

81

82

323

158

104—

161

159

—

90

44

30

47

45

42

139

72

48

92

68

69

255

134

92—

125

124

—

Overhead Low-head

50 Hz 60 Hz50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz

Motor output(kW)

50/60HzType Pole

Module Numberof teeth x Outside

diameter

Pinion (mm)

G1MO025□-□

G1MO025□-□

G1MO040T-□G1ML040T-□G1MO040□-□

G1ML040□-□

G1MO075T-□G1ML075T-□G1MO075□-□

G1ML075□-□

G1MO150T-□

0.21/0.25

0.21:0.053/0.25:0.063

0.34/0.4

0.34/0.4

0.34:0.084/0.4:0.1

0.63/0.75

0.63/0.75

0.63:0.16/0.75:0.19

1.25/1.5

4

2/8

4

4

2/8

4

4

2/8

4

2.5

3

4.5

3

4.5

8

12

8

12

8

12

8

12

8

21

8

0.452

0.294

0.452

0.294

0.460

0.294

0.460

0.294

0.550

-0.04

0.550

Mass(kg/set)

OverheadOverhead Low-headLow-head

Type Pole

Dimensions (mm)

G1M□075L-□G1M□075S-□G1M□075H-□

G1M□075SD-□

G1MO150T-□G1MO150L-□G1MO150S-□G1MO150H-□

0.63

0.63:0.16

1.25

0.75

0.75:0.19

1.5

4

2/8

4

400

415

433

484

393

426

—

45

65

38

—

156

190

154

177

210

242

122.6

132.6

90

110

70

80

4

11

13

26

27

30

36

45

90

115

27.1

36.5

27.1

36.5

32.8

43.8

32.8

43.8

50

68.8

50

0

0

0

0

0

0

0

0

0

0

0

-0.1

-0.2

-0.1

-0.2

-0.2

-0.2

-0.2

-0.2

-0.2

-0.2

-0.2

355

370

388

419

a

Overhead Low-head

cd e f y g h øi n øzb

0-0.054

0-0.054

GEARED MOTOR SPECIFICATIONS■ Dimensions ■ Specifications of Geared Motor Pinions

■ Details of Pinions

■ Brake Torque AdjustmentTorque can be adjusted within a range of 30 to 80% for a 0.25 kW motor and 0 to 50% for motors exceeding 0.4 kW of the rated torque by loosening the lock nut and setting the height of the adjusting bolt. Be sure to tighten the nut and fix the bolt after adjustment. Adjustment is the set-less type.

*Figures in the table are approximate values.

•Heat treatment: Case hardened HRC: 57 to 63.•X: Addendum modification coefficient.

•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)

•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% (for 0.25 kW:30 to 80%) of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)

G1MO025 L-E---------- --- -------- --- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)

SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)

Speed (50/60Hz)

E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz

380 V 50 Hz, 380-460 V 60 Hz

E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz

380 V 50 Hz, 380-460 V 60 HzPower sources

025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW

Motor outputs (50/60Hz)

G1MO040 T-E---------- --- -------- --- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

T: 30/36 m/mim (High speed)Speed (50/60Hz)

Power sources

040: (0.25)+0.34/0.4075: (0.4)+0.63/0.75150: (0.75)+1.25/1.5

Motor outputs

How to read types (example)

b e

*f

*yh

g

c

øi

øi

n-øz

n-øz

a d

b c ea d

*f

*yh

g

Pinion *Flange thickness of the Geared motor at the fixing holes (n-øz) are 18 mm.

*f and y show distances from pinion center to both ends.

*Flange thickness of the Geared motor at the fixing holes (n-øz) are 17 mm.

*f and y show distances from pinion center to both ends.

Pinion

Adjusting bolt

Lock nut

Spring holder

Brake spring

26 27

Power source

Motor output(kW) Mass

(kg/set)Overhead Low-headOverhead50 Hz 60 Hz

Motor output(kW)

50 Hz 60 Hz

Low-head

Type PolePower source

Dimensions (mm)

G1M□025L-□G1M□025S-□G1M□025H-□

G1M□025SD-□

G1M□040T-□G1M□040L-□G1M□040S-□G1M□040H-□G1M□040SD-□G1M□075T-□

0.21

0.21:0.053

0.34

0.34:0.084

0.63

0.25

0.25:0.063

0.4

0.4:0.1

0.75

4

2/8

4

2/8

4

B,E,Z

E

B,E,Z

E

B,E,Z

B,E,Z

E,Z

B,E,Z

E

B,E,Z

E,Z

E

B,E,Z

E

E,Z

—

B,E,Z

E,Z

B,E,Z

E

B,E,Z

290

324

339

300

335

346

281

315

291

330

341

34

25

29

142

156

146

161

193

215

67

82.2

67

70.6

72

75.2

78

92.6

78

60

70

57

66

4 9

11

17.5

19

15.5

15

14

15

16.5

17

56

74

0

0

-0.046

-0.046

256

290

305

266

301

312

a

Overhead Low-head

cd e f y g h øi n øzb

Motor output(kW)Type

*Travelingspeed (m/min)

*Motorrevolutions

(r.p.m)*Revolutions

(r.p.m)

Pinion

Tooth surface strength (kg)

G1M□025L-□G1M□025S-□G1M□025H-□G1M□040T-□

G1M□025SD-□

G1M□040L-□G1M□040S-□G1M□040H-□G1M□075T-□

G1M□040SD-□

G1M□075L-□G1M□075S-□G1M□075H-□G1M□150T-□

G1M□075SD-□

G1MO150L-□G1MO150S-□G1MO150H-□

0.21

0.34

0.053

0.21

0.34

0.63

0.084

0.34

0.63

1.25

0.16

0.63

1.25

0.25

0.4

0.063

0.25

0.4

0.75

0.1

0.4

0.75

1.5

0.19

0.75

1.5

10

20

30

5

20

10

20

30

5

20

10

20

30

5

20

10

20

30

12

24

36

6

24

12

24

36

6

24

12

24

36

6

24

12

24

36

1410

1430

730

2960

1430

1415

730

2890

1415

1440

720

2890

1440

1650

1700

870

3530

1700

1670

860

3420

1670

1700

860

3440

1700

155

314

463

469

80

325

132

255

382

378

68

266

77

146

224

218

39

157

65

127

192

181

367

541

557

91

387

156

302

453

445

79

314

91

173

253

256

47

187

77

149

227

158

78

53

83

77

75

247

128

86

162

121

123

527

278

182

372

263

259

1022

522

345

134

66

45

70

67

63

208

107

72

137

103

446

235

160

317

219

217

862

446

292

105

52

35

59

51

50

165

85

57

108

81

82

323

158

104—

161

159

—

90

44

30

47

45

42

139

72

48

92

68

69

255

134

92—

125

124

—

Overhead Low-head

50 Hz 60 Hz50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz

Motor output(kW)

50/60HzType Pole

Module Numberof teeth x Outside

diameter

Pinion (mm)

G1MO025□-□

G1MO025□-□

G1MO040T-□G1ML040T-□G1MO040□-□

G1ML040□-□

G1MO075T-□G1ML075T-□G1MO075□-□

G1ML075□-□

G1MO150T-□

0.21/0.25

0.21:0.053/0.25:0.063

0.34/0.4

0.34/0.4

0.34:0.084/0.4:0.1

0.63/0.75

0.63/0.75

0.63:0.16/0.75:0.19

1.25/1.5

4

2/8

4

4

2/8

4

4

2/8

4

2.5

3

4.5

3

4.5

8

12

8

12

8

12

8

12

8

21

8

0.452

0.294

0.452

0.294

0.460

0.294

0.460

0.294

0.550

-0.04

0.550

Mass(kg/set)

OverheadOverhead Low-headLow-head

Type Pole

Dimensions (mm)

G1M□075L-□G1M□075S-□G1M□075H-□

G1M□075SD-□

G1MO150T-□G1MO150L-□G1MO150S-□G1MO150H-□

0.63

0.63:0.16

1.25

0.75

0.75:0.19

1.5

4

2/8

4

400

415

433

484

393

426

—

45

65

38

—

156

190

154

177

210

242

122.6

132.6

90

110

70

80

4

11

13

26

27

30

36

45

90

115

27.1

36.5

27.1

36.5

32.8

43.8

32.8

43.8

50

68.8

50

0

0

0

0

0

0

0

0

0

0

0

-0.1

-0.2

-0.1

-0.2

-0.2

-0.2

-0.2

-0.2

-0.2

-0.2

-0.2

355

370

388

419

a

Overhead Low-head

cd e f y g h øi n øzb

0-0.054

0-0.054

GEARED MOTOR SPECIFICATIONS■ Dimensions ■ Specifications of Geared Motor Pinions

■ Details of Pinions

■ Brake Torque AdjustmentTorque can be adjusted within a range of 30 to 80% for a 0.25 kW motor and 0 to 50% for motors exceeding 0.4 kW of the rated torque by loosening the lock nut and setting the height of the adjusting bolt. Be sure to tighten the nut and fix the bolt after adjustment. Adjustment is the set-less type.

*Figures in the table are approximate values.

•Heat treatment: Case hardened HRC: 57 to 63.•X: Addendum modification coefficient.

•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)

•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% (for 0.25 kW:30 to 80%) of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)

G1MO025 L-E---------- --- -------- --- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)

SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)

Speed (50/60Hz)

E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz

380 V 50 Hz, 380-460 V 60 Hz

E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz

380 V 50 Hz, 380-460 V 60 HzPower sources

025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW

Motor outputs (50/60Hz)

G1MO040 T-E---------- --- -------- --- ---

Types of geared motors

O: Overhead L: Low-head Types of end carriages

T: 30/36 m/mim (High speed)Speed (50/60Hz)

Power sources

040: (0.25)+0.34/0.4075: (0.4)+0.63/0.75150: (0.75)+1.25/1.5

Motor outputs

How to read types (example)

28 29

Single speedDual speed

KITO CRANES can be fitted with peripheral equipmentfor greater durability, higher performance and greater operational efficiency.

CRANE PERIPHERAL EQUIPMENT INSTALLATION OUTLINE

SOFTRUN device

Traveling power supply

Control box

Traveling power supply

Control Boxes

Emergency Stop Device

SOFTRUN Device (option)

For an electric chain hoist with an emergency stop device.

For an electric chain hoist

For a rope hoist

(option)

28 29

Single speedDual speed

KITO CRANES can be fitted with peripheral equipmentfor greater durability, higher performance and greater operational efficiency.

CRANE PERIPHERAL EQUIPMENT INSTALLATION OUTLINE

SOFTRUN device

Traveling power supply

Control box

Traveling power supply

Control Boxes

Emergency Stop Device

SOFTRUN Device (option)

For an electric chain hoist with an emergency stop device.

For an electric chain hoist

For a rope hoist

(option)

30 31

Dual speedSingle speed

Fig.BFig.A

Type

Power supply

Rated voltage

Workingvoltagerange

A B C D E F G H I1 I2

Dimensions (mm)Ratedcurrent

Timerrange

Gearedmotoroutput

Torquesettingrange

Mass(kg/set)

SR150S-S

SR150S-Y

SR150S-A

SR300S-S

SR300S-Y

SR300S-A

SR300S-SX2

SR300S-SY2

SR300S-SA2

7.5 A

15 A

0.25 kWx20.4 kWx20.75 kWx2

1.5 kWx2

1.5 kWx4

0 to 10 1 to 5 sec ±10%

200 V

400 V

500 V

200 V

400 V

500 V

200 V

400 V

500 V

152 330 90 147 299 75 310 30 45 35

2.5

3

CONTROL BOXES

For electric chain hoist(ER2M)This control box includes a built-inelectromagnetic contactor and atransformer with control voltageof 24V. Other control voltages areavailable as an option. All modelsare equipped with an emergencystop device as standard.

With an emergency stop device

SOFTRUN DEVICE (Option)

SOFTRUNSOFTRUN uses a phase controlsystem to adjust torque and the timer.The cushion time can be freely setbetween 1 and 5 seconds. It enablessmooth start-up and operation withoutload swing. SOFTRUN uses a highly reliable semiconductor to maintain a long life.

•Control method: Voltage drop start-up using T-phase control.•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14•220.440 V and 575 V / 60 Hz(for CSA) boxes available on request.

This device electrically controls motor speed which enables the

crane to accelerate smoothly in travel and minimizes load

swing at start-up.

It is highly suited for handling high inertia loads or

operating long span cranes.

•Easily installed between the control box and geared motor. Wiring connections are simple.•Applicable for all models of motorized end carriages.

Electric slow start Mechanical slow stop

Time

Without slow start

Full speed

No.

of r

evol

utio

ns

Operation button Off

SOFTRUN

L B

H

5090

152176

4-ø10B

L380360

35

100H

BGE

4-7

CI1I2

F D

H

A

4-24 Filmedcoveredgrommet

Type

Gearedmotor output

Power supplyPendant controlvoltage

Rated current

Outline

DimensionsMass

(kg/set)Rated

voltageControl

box Traveling H B L

Single Speed

SBE015SNH~0.75kWx2

200V 50Hz

AC24V

50A 11A

Fig.A 230 140 410

7kgSBE015SNS 200~220V 60Hz

SBE030SNH~1.5kWx2

200V 50Hz75A 18A

8kg

SBE030SNS 200~220V 60Hz

SBE015SNX~0.75kWx2

380V~415V 50Hz

50A 13ASBE015SNS 440V 60Hz

SBE030SNX~1.5kWx2

380V~415V 50Hz

SBE030SNS 440V 60Hz

DualSpeed

SBE015SDNH~0.75kWx2

200V 50HzAC24V 40A 11A Fig.B 300 133 470 11kg

SBE015SDNS 200~220V 60Hz

•Models other than above control box is available as special specification. Please ask your KITO local partners.•Environment: Ambient temperature: -20 to 40˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Protection class: IP20•Color: Single Munsell 5Y7/1, Dual Munsell 6YR6/14

30 31

Dual speedSingle speed

Fig.BFig.A

Type

Power supply

Rated voltage

Workingvoltagerange

A B C D E F G H I1 I2

Dimensions (mm)Ratedcurrent

Timerrange

Gearedmotoroutput

Torquesettingrange

Mass(kg/set)

SR150S-S

SR150S-Y

SR150S-A

SR300S-S

SR300S-Y

SR300S-A

SR300S-SX2

SR300S-SY2

SR300S-SA2

7.5 A

15 A

0.25 kWx20.4 kWx20.75 kWx2

1.5 kWx2

1.5 kWx4

0 to 10 1 to 5 sec ±10%

200 V

400 V

500 V

200 V

400 V

500 V

200 V

400 V

500 V

152 330 90 147 299 75 310 30 45 35

2.5

3

CONTROL BOXES

For electric chain hoist(ER2M)This control box includes a built-inelectromagnetic contactor and atransformer with control voltageof 24V. Other control voltages areavailable as an option. All modelsare equipped with an emergencystop device as standard.

With an emergency stop device

SOFTRUN DEVICE (Option)

SOFTRUNSOFTRUN uses a phase controlsystem to adjust torque and the timer.The cushion time can be freely setbetween 1 and 5 seconds. It enablessmooth start-up and operation withoutload swing. SOFTRUN uses a highly reliable semiconductor to maintain a long life.

•Control method: Voltage drop start-up using T-phase control.•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14•220.440 V and 575 V / 60 Hz(for CSA) boxes available on request.

This device electrically controls motor speed which enables the

crane to accelerate smoothly in travel and minimizes load

swing at start-up.

It is highly suited for handling high inertia loads or

operating long span cranes.

•Easily installed between the control box and geared motor. Wiring connections are simple.•Applicable for all models of motorized end carriages.

Electric slow start Mechanical slow stop

Time

Without slow start

Full speed

No.

of r

evol

utio

ns

Operation button Off

SOFTRUN

L B

H

5090

152176

4-ø10B

L380360

35

100H

BGE

4-7

CI1I2

F D

H

A

4-24 Filmedcoveredgrommet

Type

Gearedmotor output

Power supplyPendant controlvoltage

Rated current

Outline

DimensionsMass

(kg/set)Rated

voltageControl

box Traveling H B L

Single Speed

SBE015SNH~0.75kWx2

200V 50Hz

AC24V

50A 11A

Fig.A 230 140 410

7kgSBE015SNS 200~220V 60Hz

SBE030SNH~1.5kWx2

200V 50Hz75A 18A

8kg

SBE030SNS 200~220V 60Hz

SBE015SNX~0.75kWx2

380V~415V 50Hz

50A 13ASBE015SNS 440V 60Hz

SBE030SNX~1.5kWx2

380V~415V 50Hz

SBE030SNS 440V 60Hz

DualSpeed

SBE015SDNH~0.75kWx2

200V 50HzAC24V 40A 11A Fig.B 300 133 470 11kg

SBE015SDNS 200~220V 60Hz

•Models other than above control box is available as special specification. Please ask your KITO local partners.•Environment: Ambient temperature: -20 to 40˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Protection class: IP20•Color: Single Munsell 5Y7/1, Dual Munsell 6YR6/14

32 33

Wiresxcross-sectional

area4Cx2□ 4Cx3.5□ 6Cx2□ 8Cx2□ 4Cx5.5□ 4Cx8□ 4Cx14□ 4Cx22□ 4Cx30□

Cablediameter

Part No.

Type

ø12.3

CTC4C x 2

3Cx2□

ø11

CTC3C x 2

ø14.2

*ø17.0to ø19.0

4C x 3.5□

4C x 5.5□4C x 8□

CG16

CG19

ø14.2

CTC4C x 3.5

ø14.5

CTC6C x 2

Vinyl power supply cable (VCT)Rubber power supply cable

(2CT)

ø16.8

CTC8C x 2

ø17.5

CTC4C x 5.5

ø19.5

CTC4C x 8

ø24

CTC4C x 14

ø30

CTC4C x 22

ø36

CTC4C x 30

Wiresxcross-sectional

area

Wiresxcross-sectional

areaOuter

diameter

7C composite cable(4C x 3.5□ + 3C x 0.75□)

9C composite cable(4C x 3.5□ + 5C x 0.75□)

Cablediameter

Part No.

Type

ø17.9

CTC4C + 3C

Vinyl power supply cable (VCT)

ø18.0

CTC4C + 5C

Type Cableguard

Cable size

WGL16

WGL19

ø14.2

*ø17.0to ø19.5

4C x 3.5□

4C x 5.5□4C x 8□

CG16

CG19

Wiresxcross-sectional

areaOuter

diameter

Type Cableguard

Cable size

WGO16

WGO19

With ø4 toø6 wire clip

Type

Cross-Section area (mm2)

WB

2□ 3.5□ 5.5□ 8□ 14□ 22□ 38□

10152025303540455060708090

100

25

17

12

45

30

22

18

71

47

35

28

23

20

103

69

51

41

34

29

25

23

121

90

72

60

51

45

40

36

30

114

95

81

71

63

57

47

40

35

111

97

86

77

64

55

48

43

38

IA

L-50x50x6to

L-75x75x9ø10 to ø26

Type

THLT26S-75

THLP26S-75

Anglesteel width

Cablesize

ø10 to ø22

ø10to

ø22

ø22.1to

ø26

Type Railwidth

THI19W-100

THI19W-175

THI26W-100

THI26W-175

76 to 152

127 to 178

76 to 152

127 to 178

Cable sizeUpper Lower

ø15 to ø17 orø18 to ø20

ø15 to ø17 orø20 to ø22

ø11 to ø13 orø13 to ø15

Type

TTH14S-100V

TTH14S-175V

TTH19S-100V

TTH19S-175V

TTH21S-100V

TTH21S-175V

Railwidth

Cable size

76 to 152

127 to 178

76 to 152

127 to 178

76 to 152

127 to 178

ø4 to ø6ø15 to ø17 orø18 to ø20ø15 to ø17 orø20 to ø22

ø11 to ø13 orø13 to ø15ø17 to ø19 orø18 to ø20

Type

CH14S

CH17S

CH19S

CH21S

Messengerwire

Cable size

Type

CG13

CG16

CG19

CG22

CG26

Cable size

ø10 to ø13

ø13.1 to ø16

ø16.1 to ø19

ø19.1 to ø22

ø22.1 to ø26

øA

10

13

16

19

22

øB

25

26

34

øC

28

37

D

32

POWER SUPPLY CABLES AND ACCESSORIES

Power supply cable

Junction cable forelectric chain hoist(ER2M) and rope hoist

Wire guide L

* Option

Wire guide O

* Option

Wire bolt assembly

Allowable length (m)of power supply cable(200V)

This guide is used to power the supplycable system (for low-head endcarriage).

This guide is used to power the supplycable system (for both overhead andlow-head types).

This bolt is used to fix messengerwires.

How to identify allowable power supply cable

•Internal wiring specification JEAC8001-1995 120-1 Voltage drop

The voltage drop in low voltage lines is, as a rule,to be kept within 2% of the standard voltage of thetrunk line and the branch circuit.

I A : Electric chain hoist or rope hoistRated current + Rated current of travel motor x 2

Junction cable connecting the crane contral box to the electric chain hoist. It is used for the power supply and operation circuits.

Allowablelength (m) = x1000

30.8

Cross-sectional areaof single wire (mm2)xrated voltagex0.02

I A

CABLE HANGERS

Angled hanger

T-type hanger for wirerope hoists

T-type hanger for electric chain hoist(ER2M)

Cable hanger

Cable guard

This hanger is used to hang powersupply cables with messenger wires.

This guard is used to protect cablesstrung from T-type and angledhangers.

This hanger uses an angle steel tohang power supply cables. TheTHLP type is used to hang push-button cord.

This hanger is used to hang powersupply cables and is suited for allsizes of cable and rails.•Suited for hanging dynamic and operation cables for rope hoists.

This hanger is used to hang powersupply cables. It is applicable for allsizes of cable and rail widths, andis suited for compound cables.

•THLT type •THLP type

170

65550

20.5

Cable guard

2-11

Cable guard

ø32

8

45

110

78

ø32

22 2- ø14

32

101

M1018.3

94

Cable guard Cable guard

46 68

94

46

48

100

Cable guard

57

29 or 33

46

41

29 or 33

42

D

C

6 （6） 1.5

BA

32 33

Wiresxcross-sectional

area4Cx2□ 4Cx3.5□ 6Cx2□ 8Cx2□ 4Cx5.5□ 4Cx8□ 4Cx14□ 4Cx22□ 4Cx30□

Cablediameter

Part No.

Type

ø12.3

CTC4C x 2

3Cx2□

ø11

CTC3C x 2

ø14.2

*ø17.0to ø19.0

4C x 3.5□

4C x 5.5□4C x 8□

CG16

CG19

ø14.2

CTC4C x 3.5

ø14.5

CTC6C x 2

Vinyl power supply cable (VCT)Rubber power supply cable

(2CT)

ø16.8

CTC8C x 2

ø17.5

CTC4C x 5.5

ø19.5

CTC4C x 8

ø24

CTC4C x 14

ø30

CTC4C x 22

ø36

CTC4C x 30

Wiresxcross-sectional

area

Wiresxcross-sectional

areaOuter

diameter

7C composite cable(4C x 3.5□ + 3C x 0.75□)

9C composite cable(4C x 3.5□ + 5C x 0.75□)

Cablediameter

Part No.

Type

ø17.9

CTC4C + 3C

Vinyl power supply cable (VCT)

ø18.0

CTC4C + 5C

Type Cableguard

Cable size

WGL16

WGL19

ø14.2

*ø17.0to ø19.5

4C x 3.5□

4C x 5.5□4C x 8□

CG16

CG19

Wiresxcross-sectional

areaOuter

diameter

Type Cableguard

Cable size

WGO16

WGO19

With ø4 toø6 wire clip

Type

Cross-Section area (mm2)

WB

2□ 3.5□ 5.5□ 8□ 14□ 22□ 38□

10152025303540455060708090

100

25

17

12

45

30

22

18

71

47

35

28

23

20

103

69

51

41

34

29

25

23

121

90

72

60

51

45

40

36

30

114

95

81

71

63

57

47

40

35

111

97

86

77

64

55

48

43

38

IA

L-50x50x6to

L-75x75x9ø10 to ø26

Type

THLT26S-75

THLP26S-75

Anglesteel width

Cablesize

ø10 to ø22

ø10to

ø22

ø22.1to

ø26

Type Railwidth

THI19W-100

THI19W-175

THI26W-100

THI26W-175

76 to 152

127 to 178

76 to 152

127 to 178

Cable sizeUpper Lower

ø15 to ø17 orø18 to ø20

ø15 to ø17 orø20 to ø22

ø11 to ø13 orø13 to ø15

Type

TTH14S-100V

TTH14S-175V

TTH19S-100V

TTH19S-175V

TTH21S-100V

TTH21S-175V

Railwidth

Cable size

76 to 152

127 to 178

76 to 152

127 to 178

76 to 152

127 to 178

ø4 to ø6ø15 to ø17 orø18 to ø20ø15 to ø17 orø20 to ø22

ø11 to ø13 orø13 to ø15ø17 to ø19 orø18 to ø20

Type

CH14S

CH17S

CH19S

CH21S

Messengerwire

Cable size

Type

CG13

CG16

CG19

CG22

CG26

Cable size

ø10 to ø13

ø13.1 to ø16

ø16.1 to ø19

ø19.1 to ø22

ø22.1 to ø26

øA

10

13

16

19

22

øB

25

26

34

øC

28

37

D

32

POWER SUPPLY CABLES AND ACCESSORIES

Power supply cable

Junction cable forelectric chain hoist(ER2M) and rope hoist

Wire guide L

* Option

Wire guide O

* Option

Wire bolt assembly

Allowable length (m)of power supply cable(200V)

This guide is used to power the supplycable system (for low-head endcarriage).

This guide is used to power the supplycable system (for both overhead andlow-head types).

This bolt is used to fix messengerwires.

How to identify allowable power supply cable

•Internal wiring specification JEAC8001-1995 120-1 Voltage drop

The voltage drop in low voltage lines is, as a rule,to be kept within 2% of the standard voltage of thetrunk line and the branch circuit.

I A : Electric chain hoist or rope hoistRated current + Rated current of travel motor x 2

Junction cable connecting the crane contral box to the electric chain hoist. It is used for the power supply and operation circuits.

Allowablelength (m) = x1000

30.8

Cross-sectional areaof single wire (mm2)xrated voltagex0.02

I A

CABLE HANGERS

Angled hanger

T-type hanger for wirerope hoists

T-type hanger for electric chain hoist(ER2M)

Cable hanger

Cable guard

This hanger is used to hang powersupply cables with messenger wires.

This guard is used to protect cablesstrung from T-type and angledhangers.

This hanger uses an angle steel tohang power supply cables. TheTHLP type is used to hang push-button cord.

This hanger is used to hang powersupply cables and is suited for allsizes of cable and rails.•Suited for hanging dynamic and operation cables for rope hoists.

This hanger is used to hang powersupply cables. It is applicable for allsizes of cable and rail widths, andis suited for compound cables.

•THLT type •THLP type

170

65550

20.5

Cable guard

2-11

Cable guard

ø32

8

45

110

78

ø32

22 2- ø14

32

101

M1018.3

94

Cable guard Cable guard

46 68

94

46

48

100

Cable guard

57

29 or 33

46

41

29 or 33

42

D

C

6 （6） 1.5

BA

34 35

Girdersection

DimensionsA x B x t1 x t2

(kg/m)

26

38.3

55.5

48.3

65.5

76.8

58.5

87.2

72

95.8

91.7

115

500 kg

6.0

6.0

8.6

8.3

11.2

11.2

10.2

10.0

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.2

11.0

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

1.0 t

4.6

4.6

6.7

6.1

8.2

8.2

9.0

7.6

10.2

10.2

11.2

11.2

9.4

9.0

11.6(11.2)

11.6(11.2)

11.0

10.6

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

1.5 t

5.5

6.9

6.9

6.8

8.5

8.5

9.4

9.4

7.8

7.7

11.3(11.2)

11.3(11.2)

9.3

8.7

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.0

11.6(11.2)

2.0 t

4.5

6.0

6.0

6.1

7.7

7.4

8.2

8.2

6.9

9.9

9.9

8.3

8.1

11.3(11.2)

11.2

10.5

10.7

11.6(11.2)

11.6(11.2)

2.5 t

4.0

5.4

5.4

5.6

6.8

6.7

7.5

7.5

6.4

9.0

9.0

7.6

7.5

10.3

9.4

9.6

9.9

11.6(11.2)

11.4(11.2)

3.0 t

4.9

4.9

4.9

6.2

6.4

6.9

6.9

6.0

8.3

8.3

7.2

7.1

9.2

8.7

8.8

9.3

11.1

10.5

5.0 t

3.8

4.3

5.4

5.0

3.6

6.6

6.1

5.6

5.1

6.8

6.6

6.8

6.8

8.5

8.1

7.5 t

4.5

4.2

5.2

4.8

5.6

6.8

6.5

10 t

3.1

3.9

3.6

5.4

4.8

I-200 x 100 x 7 x 10

I-250 x 125 x 7.5 x 12.5

I-250 x 125 x 10 x 19

I-300 x 150 x 8 x 13

I-300 x 150 x 10 x 18.5

I-300 x 150 x 11.5 x 22

I-350 x 150 x 9 x 15

I-350 x 150 x 12 x 24

I-400 x 150 x 10 x 18

I-400 x 150 x 12.5 x 25

I-450 x 175 x 11 x 20

I-450 x 175 x 13 x 26

Allowable span (m)

B

t1

t2

A

I-beam

: For kito electric hoist.: For kito wire rope hoist.

CRANE GIRDER ALLOWABLE SPANSingle Rail (JIS)

•The above data is calculated according to the crane standard in Japan: Deflection=Within 1/1000 x span. Allowable bending stress=Within 1390 kg/cm2

•A stop drawing for the girder available on request.•The figures in parentheses are data for Low-head cranes.

Reference Examples of Special Specification Systems

Kito offers a variety of systems that are created by combining Kito Chain Sling 100 products with Kito’s motorized and manual hoists and cranes.Special specifications are realized as order-made products.

Overhead Crane(Single Girder)

Overhead Crane(Double Girder)

Jib Crane Pillar Type(JP Type)

Jib Crane Wall Type(JW Type)

Jib Crane Wall Type(LJW Type)

Light Crane(Steel Rail)

Light Crane(Aluminum Rail)

Low-head Crane Gantry Crane

Electric Chain Hoist ER2/EQ/EDWire Rope Hoist Chain Hoist M3/CX

Products are order-made to match applications. (Several examples are introduced below)

Each Typeof Crane

Each Typeof Hoist

Kito Chain Sling 100Special Specifications

For Coils

For Train Wheels

For Coils

For Balance Beams/Distance Bars

For Rails

For Balance Beams/Standard Types

For Plastic Containers

For Pipes

For Short Headroom Types

For Pallets

In the situation where you wish to transport unique work pieces with high efficiency using dedicated slings,

Kito Chain Sling 100 “Special Specification” products will support every requirement.

34 35

Girdersection

DimensionsA x B x t1 x t2

(kg/m)

26

38.3

55.5

48.3

65.5

76.8

58.5

87.2

72

95.8

91.7

115

500 kg

6.0

6.0

8.6

8.3

11.2

11.2

10.2

10.0

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.2

11.0

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

1.0 t

4.6

4.6

6.7

6.1

8.2

8.2

9.0

7.6

10.2

10.2

11.2

11.2

9.4

9.0

11.6(11.2)

11.6(11.2)

11.0

10.6

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.6(11.2)

1.5 t

5.5

6.9

6.9

6.8

8.5

8.5

9.4

9.4

7.8

7.7

11.3(11.2)

11.3(11.2)

9.3

8.7

11.6(11.2)

11.6(11.2)

11.6(11.2)

11.0

11.6(11.2)

2.0 t

4.5

6.0

6.0

6.1

7.7

7.4

8.2

8.2

6.9

9.9

9.9

8.3

8.1

11.3(11.2)

11.2

10.5

10.7

11.6(11.2)

11.6(11.2)

2.5 t

4.0

5.4

5.4

5.6

6.8

6.7

7.5

7.5

6.4

9.0

9.0

7.6

7.5

10.3

9.4

9.6

9.9

11.6(11.2)

11.4(11.2)

3.0 t

4.9

4.9

4.9

6.2

6.4

6.9

6.9

6.0

8.3

8.3

7.2

7.1

9.2

8.7

8.8

9.3

11.1

10.5

5.0 t

3.8

4.3

5.4

5.0

3.6

6.6

6.1

5.6

5.1

6.8

6.6

6.8

6.8

8.5

8.1

7.5 t

4.5

4.2

5.2

4.8

5.6

6.8

6.5

10 t

3.1

3.9

3.6

5.4

4.8

I-200 x 100 x 7 x 10

I-250 x 125 x 7.5 x 12.5

I-250 x 125 x 10 x 19

I-300 x 150 x 8 x 13

I-300 x 150 x 10 x 18.5

I-300 x 150 x 11.5 x 22

I-350 x 150 x 9 x 15

I-350 x 150 x 12 x 24

I-400 x 150 x 10 x 18

I-400 x 150 x 12.5 x 25

I-450 x 175 x 11 x 20

I-450 x 175 x 13 x 26

Allowable span (m)

B

t1

t2

A

I-beam

: For kito electric hoist.: For kito wire rope hoist.

CRANE GIRDER ALLOWABLE SPANSingle Rail (JIS)

•The above data is calculated according to the crane standard in Japan: Deflection=Within 1/1000 x span. Allowable bending stress=Within 1390 kg/cm2

•A stop drawing for the girder available on request.•The figures in parentheses are data for Low-head cranes.

Reference Examples of Special Specification Systems

Kito offers a variety of systems that are created by combining Kito Chain Sling 100 products with Kito’s motorized and manual hoists and cranes.Special specifications are realized as order-made products.

Overhead Crane(Single Girder)

Overhead Crane(Double Girder)

Jib Crane Pillar Type(JP Type)

Jib Crane Wall Type(JW Type)

Jib Crane Wall Type(LJW Type)

Light Crane(Steel Rail)

Light Crane(Aluminum Rail)

Low-head Crane Gantry Crane

Electric Chain Hoist ER2/EQ/EDWire Rope Hoist Chain Hoist M3/CX

Products are order-made to match applications. (Several examples are introduced below)

Each Typeof Crane

Each Typeof Hoist

Kito Chain Sling 100Special Specifications

For Coils

For Train Wheels

For Coils

For Balance Beams/Distance Bars

For Rails

For Balance Beams/Standard Types

For Plastic Containers

For Pipes

For Short Headroom Types

For Pallets

In the situation where you wish to transport unique work pieces with high efficiency using dedicated slings,

Kito Chain Sling 100 “Special Specification” products will support every requirement.

•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •When you want to use our products for special purposes, consult us in advance.•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.•Product specifications may vary depending on the country. For more details please contact the nearest KITO dealer.

Distributed by:

Printed in Japan 01.12(A.H)CRGE01-01

U.S.A.Harrington Hoists, Inc.401 West End Avenue, Manheim, PA 17545, U.S.A.TEL: +1-717-665-2000 FAX: +1-717-665-2861www.harringtonhoists.com/

PEERLESS INDUSTRIAL GROUP, INC.1416 East Sanborn St. Winona, MN 55987, U.S.A.TEL: +1-800-873-1916 FAX: +1-800-356-1149www.peerlesschain.com/

CANADAKITO CANADA INC.309-3815 1st Ave., Burnaby, BC V5C 3V6, CanadaTEL: +1-604-291-9955 FAX: +1-604-294-8855www.kito.ca/

BRAZILKITO DO BRASIL COMÉRCIO DE TALHAS E GUINDASTES LTDAUnidade 38 do CLE – CENTRO LOGISTICO EMBURua José Semião Rodrigues Agostinho, 1370, Bairro Água Espraiada – Embu das Artes, SP, BrasilTEL: +55-11-3253-1000 FAX: +55-11-3253-1008http://www.kito.com/br/

GERMANYKito Europe GmbHHeerdter Lohweg 93, D-40549 Düsseldorf, GermanyTEL: +49-(0)211-528009-00 FAX: +49-(0)211-528009-59www.kito.net/

ITALIAKito Chain Italia S.r.l.Via Giuseppe Verdi 11, 33018, Tarvisio (Ud), ItaliaTEL: +39-(0)428-4171 FAX: +39-(0)428-417301

AUSTRALIAKITO PWB441 Grimshaw Street, Bundoora, VIC 3083, AustraliaTEL: +61-1300-792-262 FAX: +61-3-9467-7290www.pwbanchor.com.au/

Head Office & Factory2000 Tsuijiarai Showa-Cho, Nakakoma-Gun, Yamanashi 409-3853, JapanTEL: +81-55-275-7521 FAX: +81-55-275-6162

Tokyo Head OfficeSHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809, JapanTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com

Internat ional Sales Subsid iar ies

CHINAJIANGYIN KITO CRANE CO., LTD.18 Cheng Jiang East Road, Jiang Yin, Jiang Su 214429, ChinaTEL: +86-510-86199700 FAX: +86-510-86196633www.kaicheng.com/

SHANGHAI KITO TRADING CO., LTD.Room 11J, Zao-Fong Universe Building, No1800 ZhongShan West Road Shanghai 200235, ChinaTEL: +86-21-54488935 FAX: +86-21-54488937www.kito.com.cn/

TAIWANKITO TAIWAN CO., LTD.12F-1, 128c sec. 3, Ming-Shen East Road, Taipei, Taiwan 10596TEL: +886-2-2719-7616 FAX: +886-2-2719-6900www.tw.kito.com/

KOREAKITO KOREA CO., LTD.3Dong 903, 15, Pangyo-Ro 228Beon-gil, Bundang-gu, Seongnam-si, Gyeoonggi-do, Korea 13487TEL: +82-31-600-7450 FAX: +82-31-600-7469www.kito.kr/

THAILANDSIAM KITO CO., LTD.205 M.2, T.Klongtumru, A.Muangchonburi, Chonburi 20000, ThailandTEL: +66-3819-5711 FAX: +66-3846-8195www.siamkito.co.th/

INDIAArmsel MHE Pvt. Ltd.Sy No 118/2 of Jakkur Village, 80 Feet Road, Jakkur Post, Yelahanka Hobli, Bengaluru – 560064, Karnataka, IndiaTEL: +91-80-3357-2525Mail: enquiry@armsel.comwww.armsel.com

INDONESIAPT. KITO INDONESIAJL. Kenari Raya Block G2-10A, Delta Silicon 5,Lippo Cikarang, Bekasi, IndonesiaTEL: +62-21-2961-2150 FAX: +62-21-2961-2151https://id.kito.com/id/