EN PENDANT CONTROL PANEL
Transcript of EN PENDANT CONTROL PANEL
PENDANT CONTROL PANEL JOINTS AND SUPPORT SYSTEMSCONSOLE
EN
www.mpgamma.com
2
MPGAMMA
STEEL FACTOR MPGAMMA, with a well-established industrial tradition, is one of the most important manufacturers of stainless steel casings at a national and European level.
Knowledge and ongoing learning, factors that are felt and experienced throughout the day, to ensure and enhance our commitment, to look beyond borders.
Our continuous research and constant focus on new production technologies are reflected in the manufacturing of each individual product.
The perfect interplay between investments, technology and experience creates a quality product.
Quality certifications are essential to provide maximum safety to our customers.
Investments, corporate and product certifications are the trademark of a well-organised and solid company.
All our production and logistics processes have one goal: balance.
QUALITY SERVICE•Productcustomisation,drillingandpre-processing.•Specialproductsaccordingtodesign.•Highflexibility.• Fastdelivery.•Widestockavailability.•Directdistributionthroughoutthecountryandabroad.•Wecanmeetanycustomerrequirement.
QUALITY PRODUCTS•StainlesssteelAISI304LDIN1.4307ENX2CrNi18-09 AISI316LDIN1.4404ENX2CrNiMo17-12-2.•High-finishTIG,MIG,CMTwelding.•Weldingprocessqualifiedinaccordancewith15614-1:2012WPQR (WeldingProcedureQualificationRecord).•Accessoriesentirelymadeofstainlesssteel.•Scratch-proofprotectionofthesheetmetalandprotectivepackaging.•Compliancewiththelatesthygieneguidelinesinthefoodindustry.
QUALITY ORGANISATION•ProductioninaccordancewithinternationalUNIENISO9001 standards.•Totalqualityprocessmanagement.•Qualificationofpersonnel.•Broadandflexibleproductionprogramme.•Fullyautomatedmanufacturingsystems.•Cutting-edgeproductiontechnology.•QualifiedweldingpersonnelinaccordancewithUNIENISO 14732:2013andUNIENISO9606-1:2013.
QUALITYTECHNOLOGYEXPERIENCE
3 3
INDEX
468
1012
14-151617
18
19
20
21
22
ACCESSORIES
PENDANT CONTROL PANEL ENCLOSURESKC SERIES
PENDANT CONTROL PANEL ENCLOSURESKCS “SKIN” SERIES
SUPPORTING SUSPENSION ARMST SERIES
CONSOLEARCO T AND ARCO TS SERIES
PLUMP CONSOLEPLP SERIES
TRANSPARENT OVERDOOR FOR PENDANT CONTROL PANELS AND CONSOLES
LOCKS AND KEYS
CONDUCTIVE SEALS
DIAGRAM POCKET
SWIVEL WHEELS KIT FOR CONSOLE
LIFTING FEET KIT FOR CONSOLE
BOTTOM TILTED SUPPORT FOR CONSOLE
PROTECTION CAPS KIT FOR CONSOLE VENTILATION/FILTERING SYSTEMS
OPEN DOOR LOCKING DEVICE FOR CONSOLE
WIRING PLATE
JOINT FIXING BRACKET
FIXED JOINT
MACHINE SIDE ROTATING JOINT
PENDANT CONTROL PANEL SIDE ROTATING JOINT
LOCKING KIT
PRODUCTS
4
PENDANT CONTROL PANEL ENCLOSURESKC SERIES
The Pendant control panel enclosures of the “KC” series are designed to contain command and control devices near the operator.
FEATURES•EntirelymadeofAISI304Lsteel(Wnr1.4307).
•Tobeusedinconjunctionwiththe“T”seriessystemofload-bearing armswiththerelativeGMseriesrotatingjoints(machineside)orGS series(Pendantcontrolpanelside)andfixedjointsGFseriestoensure smooth control of the instruments.
•Designed for support with arms featuring a 48 mm and 60 mm diameter.
•Canbeassembledwiththearmsupportonthelowerorupperside and the door is reversible.
•Bodywithweldedandfinishedcorners.
•Door with rounded corners, can be opened to at least 120° with internal stainless steel hinges, side locks with stainless steel insert featuring a double flap, welded and finished corners.
•FINEexternalSATINfinish,mediumScotch-Britetype.
•Polyurethanesealwithrobotisedapplication.
• InternalM6studsboltsfixedatthebackofthebodytofixDINbarsor agalvanisedwiringplate(itemKP)tobeorderedseparately.
•Ergonomichandle.
•InternalM6x16stainlesssteelearthingthreadedstudsbolts.
•Sheetmetalthicknessvaluesofthebodyanddoorfrom12/10mmto15/10mmdependingonthesize.
OPTIONALS UPON REQUEST•Drillingasperdesign.
•Resistantsiliconeseals,from-50°Cto+180°C.
•ProductsmadewithAISI316Lorotherspecialsteels.
•Specialdimensions.
•Genericandspecificaccessories.
CERTIFICATIONS• IP66-IP69K-IK10 protection rating certified by TÜV SUD in accordancewithEN62208.
•TYPE1,12,4,4X(cULus)protectionratinginaccordancewithUL50, 508A,746CandCSA22.2No14,94(uponrequest).
•Suitable for use in potentially explosive atmospheres (Group -II-, Category-3-,Zone-22,2-)withtheapplicationoftheaccessoryKIT- ATEXKC-2-22.
•Weldingprocessqualified inaccordancewith15614-1:2012WPQR (WeldingProcedureQualificationRecord).
5 5
AVAILABLE ACCESSORIES
External dim. Wiring plate Features
Code Art.
W H D X Y CodeNo.
Closing pointsNo.
HandlesJoint
KC403015 400 300 150 370 250 KCPF0400300 1 2 Ø48
KC453515 450 350 150 420 300 KCPF0450350 1 2 Ø48
KC504015 500 400 150 470 350 KCPF0500400 2 2 Ø60
KC505015 500 500 150 470 450 KCPF0500500 2 2 Ø60
KC604015 600 400 150 570 350 KCPF0600400 2 2 Ø60
KC605015 600 500 150 570 450 KCPF0600500 2 2 Ø60
VERSIONWITH1CLOSINGPOINT DRILLINGDETAILS
D
D
W
WX
AVAILABLEDRILLINGSPACE
Y
4HOLESØ9 4HOLESØ9
VERSIONWITH2CLOSINGPOINTS WIRINGPLATE(Accessory)
AVAILABLESPACEINSIDETHEPENDANTCONTROLPANELWITHANDWITHOUTTHEWIRINGPLATE
AVAILABLEDRILLINGSPACE
H
H
6
OPTIONALS UPON REQUEST•Drillingasperdesign.
•Resistantsiliconeseals,from-50°Cto+180°C.
•ProductsmadewithAISI316Lorotherspecialsteels.
•Specialdimensions.
•Genericandspecificaccessories.
CERTIFICATIONS• IP66-IP69K-IK10 protection rating certified by TÜV SUD in accordancewithEN62208.
•TYPE 1, 12, 4, 4X (cULus) protection rating in accordance with UL50,508A,746CandCSA22.2No14,94(uponrequest).
•Suitable for use in potentially explosive atmospheres (Group -II, Category -3-, Zone -22,2-) with the application of the accessory KIT-ATEXKCS-2-22.
•Weldingprocessqualified inaccordancewith15614-1:2012WPQR (WeldingProcedureQualificationRecord).
PENDANT CONTROL PANEL ENCLOSURESKCS “SKIN” SERIES
The Pendant control panel enclosures of the KCS “SKIN”seriesfeatureanelegantandultra-thin(just100mm)designand have been created to contain command and control devices near the operator.
FEATURES•EntirelymadeofAISI304Lsteel(Wnr1.4307).
•At the back there is an inspectable and removable support acting as a link between the supporting arm and the pendant control panel enclosures.
•Tobeusedinconjunctionwiththe“T”seriessystemofload-bearing armswiththerelativeGMseriesrotatingjoints(machineside)orGS series(Pendantcontrolpanelside)andfixedjointsGFseriestoensure smooth control of the instruments.
•Designed for support with arms featuring a 48 mm and 60 mm diameter.
•Canbeassembledwiththearmsupportonthelowerorupperside and the door is reversible.
•Bodywithweldedfinishedcorners.
•Doorwithradialcorners,canbeopenedtoatleast120°withinternal stainless steel hinges, side locks with stainless steel insert featuring a double flap, welded finished corners.
•FINEexternalSATINfinish,mediumScotch-Britetype.
•Polyurethanesealwithrobotisedapplication.
•Ergonomichandle.
• InternalM6x16stainlesssteelearthingthreadedstudsbolts.
•Sheetmetalthicknessvaluesofthebodyanddoorfrom12/10mmto 15/10mmdependingonthesize.
7 7
AVAILABLE ACCESSORIES
D W
H
WD D
VERSIONWITH1CLOSINGPOINT
VERSIONWITH2CLOSINGPOINTS
AVAILABLEDRILLINGSPACE
AVAILABLEDRILLINGSPACEONLYKCS505010ANDKCS605010
BRACKETFORØ60JOINT
BRACKETFORØ48JOINT
AVAILABLESPACEINSIDETHEPENDANTCONTROLPANEL
4HOLESØ9
4HOLESØ9
External dim. Features
Code Art.
W H DNo.
HandlesNo.
Closing pointsShelves
KCS403010 400 300 100 1bottomone 1 forØ48joint
KCS453510 450 350 100 1bottomone 1 forØ48joint
KCS504010 500 400 100 1bottomone 2 forØ60joint
KCS505010 500 500 100 2 side ones 2 forØ60joint
KCS604010 600 400 100 1bottomone 2 forØ60joint
KCS605010 600 500 100 2 side ones 2 forØ60joint
8
CERTIFICATIONS• IP66-IP69K-IK10protectionrating.
•Weldingprocessqualified inaccordancewith15614-1:2012WPQR (WeldingProcedureQualificationRecord).
SUPPORTING SUSPENSION ARMST SERIES
Supportingsystemsconsistingofarmsandfixedorrotatingjoints.
TobeusedinconjunctionwithourKCandKCSseriesPendantcontrol panels items or any other enclosure with an adequate weightandsize.
FEATURES•Supportingarmssystem,item“T”withadiametermeasuring48mm and60mm,fittedwithfixedorrotatingjoints.
•EntirelymadeofAISI304L(WNR1.4307)withanexternalsatinfinish and smooth or sloping surfaces without interstices.
•Designedwitha330°rotationlockingsystemtopreventdamageto wiring cables.
•The KC403015, KC453515, KCS403010 and KCS453510 models aredesignedforsupportingarmswitha48mmdiameter.
•The KC504015, KC505015, KC604015, KC605010, KCS504010, KCS505010,KCS604010andKCS605010modelsaredesignedfor supportingarmswitha60mmdiameter.
•Thearmsareassembledandweldedwhentheyaresupplied.
•For special applications with strong vibrations, lengths exceeding 1000 mm or heavy weights, it may be necessary to use specific reinforcements applied to the supporting arm.
OPTIONALS UPON REQUEST•Length and geometric shape of the arms according to customer specifications.
9 9
AVAILABLE ACCESSORIES
FRAME
OPERATORSIDE
C-SHAPED S-SHAPEDL-SHAPED I-SHAPED
Forordersorquotes,werecommendcreatingthecodebyusingthedesignateddiagram.Checktherecommendedminimumandmaximumsize,byspecifyingwhichisthemachinesideandthePendantcontrolpanelside,asthetypeofjointisdifferent.
(Seepage20and21forthetypeofjoint)
T ITEMCODE
4 PIPEDIAMETERØ48.3
6 PIPEDIAMETERØ60.3
C PIPEGEOMETRICALSHAPE
S PIPEGEOMETRICALSHAPE
L PIPEGEOMETRICALSHAPE
I PIPEGEOMETRICALSHAPE
ASIDELENGTH-MIN.200xØ48-MIN.250xØ60
LSIDELENGTH-MIN.400
BSIDELENGTH-MIN.200xØ48-MIN.250xØ60
M MACHINESIDE1JOINTTYPE-ROTATING,LARGE
F MACHINESIDE1JOINTTYPE-FIXED,BEVELLED
X WITHOUTJOINTONSIDE1
S PENDANTCONTROLPANELSIDE2JOINTTYPE-ROTATING,BEVELLED
F PENDANTCONTROLPANELSIDE2JOINTTYPE-FIXED,BEVELLED
X WITHOUTJOINTONSIDE2
H PLATEONMACHINESIDE
E.G. T 4 C 0200 0400 0200 M S H
10
OPTIONALS UPON REQUEST•Drillingasperdesign.
•Resistantsiliconeseals,from-50°Cto+180°C.
•ProductsmadewithAISI316Lorotherspecialsteels.
•Specialdimensions.
•Genericandspecificaccessories.
CERTIFICATIONS• IP66IK10protectionratinginaccordancewithEN62208.
•Weldingprocessqualified inaccordancewith15614-1:2012WPQR (WeldingProcedureQualificationRecord).
CONSOLEARCO T AND ARCO TS SERIES
TheARCOserieswascreated tomeet theneed toprotectindustrialPCsandoperatorpanels,thebrainandtheinterfaceof all industrial automation systems.
Itsenclosure,withanattractivedesign,isentirelymadeofAISI304(WNR1.4307),oneofthebest-performingmaterialsinterms of mechanical characteristics and corrosion resistance.
TheARCOTsolutiononlyconsistsoftheupperstoragebox,whiletheTSversionalsoincludesthelowerboxwithdropleafopening. The 2 boxes are connected to each other to allow the cables to pass through.
FEATURES•Externalboxanddropleaf(onlytheTSversion)featuringaFINESATIN finish,mediumScotch-Brite.
•Upperboxbodywithfrontandreardoorthatcanbeopenedto120° with internal stainless steel hinges, stainless steel locks and polyurethane seal with robotised application.
•Removableflangewithscrewsandsealonthelowersideofthebox.
• InternalM6x15stainlesssteelearthing threadedstudsbolts, in line with current regulations.
•Supporting pipes, alsomade of AISI 304, bent andmirror-polished with cable entry holes near the box body couplings.
•SolidAISI304basewithergonomicdesignandfittedwith4height- adjustablefeetandlowerprotectionsforthebottominfeedcables.
•Bottom dropleaf (TS version only) with front top-opening door with traction gas springs for speed-controlled opening.
•Pull-outmouse-holder.
•Keyboardfixingsystem.
•Galvanized sheet metal wiring plate attached at the back to fix a terminal block or other devices.
11 11
AVAILABLE ACCESSORIES
ARCOT ARCOTS
AVAILABLEDOORDRILLINGSPACE
Dimensions Box dimensionsKeyboard
Compartment
Code Art.
W H D W1 H1 D1 H2
ARCO T 780 1746 750 550 500 210 -
ARCO TS 780 1746 750 550 500 210 280
W
D
H
H1
D1 D1
H1
H2
H
W1
W1 W1
H1
12
OPTIONALS UPON REQUEST•Drillingasperdesign.
•Resistantsiliconeseals,from-50°Cto+180°C.
•ProductsmadewithAISI316Lorotherspecialsteels.
•Specialdimensions.
•Genericandspecificaccessories.
CERTIFICATIONS• IP66-IK10andIP69-IK10protectionratinginaccordancewith EN62208.
•Weldingprocessqualified inaccordancewith15614-1:2012WPQR (WeldingProcedureQualificationRecord).
PLUMP CONSOLEPLP SERIES
ThePLUMPConsolewascreatedtomeettheneedtoprotectindustrialPCsandoperatorpanels,thebrainandtheinterfaceof all industrial monitoring and automation systems.
PLUMP is an innovative multipurpose system, whoseenclosureis suitable for any kind of application.
An innovative design, the fact of being easy to clean, the high protection rating and especially the elegance complete thefeaturesofthePLUMPsystem,makingitavaluableallyfor installers, builders and design engineers in the field of machines and systems for food production and processing, pharmaceuticals, chemicals, as well as the oil and gas sector.
Itensurestheoperatorpanelcanbeintegratedwiththesemi-automatic and manual controls.
FEATURES•MadeofAISI304L(WNR1.4307).
• FINEexternalSATINfinish,mediumScotch-Britetype.
•Availablewiththeconsolecontainerin2differentsizes.
•Swiveljointwith330°lockundertheenclosureoftheconsole.
•N.02ergonomicstainlesssteelsidehandles.
•N.02sidestainlesssteelhandleswith1/4ofaturnanddoubleflap insert.
•Tiltedconsoleforimprovedergonomics,withopenableandreversible front door.
•Galvanisedwiringplate.
•Removablerearflangeflushwiththesheetmetal,withoutinterstices, designedfordrillingandinstallingventilationsystems(natural/forced, air-conditioning).
•Sturdysupportingrod,60mmdiameter.
•Basewithremovablecableinfeedflange.
•Strong,widebasetoensurefullsafetyandstability.
13 13
AVAILABLE ACCESSORIES
FRONTDOORDETAIL
Dimensions DoorsAvailable front
inlet dimensionsVertical overall
dimensionsCode Art.
W H N° W1 H1 A B
PLP5450 540 500 1 485 465 1635 1395
PLP6050 600 500 1 545 465 1635 1395
STANDARDFLANGEDRILLABLEAREA
330°ROTATING
JOINT
ADJUSTABLEFEET(OPTIONAL)
SWIVELWHEELS(OPTIONAL)
A
B
H
AVAILABLEDRILLINGSPACE
W
H
WIRINGPLATEDETAIL
STANDARDREARFLANGEDETAIL
W1
H1
14
VERSION FOR PENDANT CONTROL PANELS
KC KCS
The overdoor is assembled in the factory and must be ordered together with the enclosure.
Wecansupplyakittobeassembledonsite,byorderingtheSVK_Kcodeindividually, consisting of a Pendant control panel door and overdoor.
Easy assembly, carried out directly by the final client.
ACCESSORIES
TRANSPARENT OVERDOOR
KC KCS PLPARCO
TARCO
TS
MadeofAISI304L(WNR1.4307)stainlesssteelandusedtoprotectthecomponents and devices mounted at the front of the enclosure, ensuring anIP66IK10andIP69KIK10protectionrating.
Thetransparentpanelismadeofshock-proofLEXANasstandard,butcan be replaced with laminated safety glass.
Reversibledooropening,i.e.thehingescanbemountedontherightorontheleft:intheKC,KCSandPLPseriesitis180°,whileintheARCOTandARCOTSseries,itis90°or180°,dependingontheapplication.
A 1/4-turn lock installed, entirely made of stainless steel with 3mmdouble-flap insert, but can be replaced by any kind of lock or insert.
Code W H D
SVK40306 400 300 60
SVK45356 450 350 60
SVK50406 500 400 60
SVK50506 500 500 60
SVK60406 600 400 60
SVK60506 600 500 60 W
H
AVAILABLEDRILLINGSPACEONTHEPENDANTCONTROLPANELDOORWITHOVERDOOR
15 15
ACCESSORIES
Code W H D
SVARCO55506 550 500 60
VERSION FOR PLUMP CONSOLE
PLP
The overdoor is assembled in the factory and must be ordered together withtheConsole.
Wecansupplyakittobeassembledonsite,byorderingtheSVPLP_Kcodeindividually,consistingofaConsoledoorandoverdoor.
Easy assembly, carried out directly by the final client.
VERSION FOR ARCO CONSOLE
ARCO
TARCO
TS
Wesupplyanassemblykitwiththerelativetemplatefordrillingonsideor it can be pre-assembled upon request.
AVAILABLEDRILLINGSPACEONTHECONSOLEWITHOVERDOOR
W
H
AVAILABLEDRILLINGSPACEW
H
Code W H D
SVPLP54506 540 500 60SVPLP60506 600 500 60
16
ACCESSORIES
LOCKS AND KEYS
KC KCS PLPARCO
TARCO
TS
Keys and locks commonly used for Pendant control panel enclosures, KCandKCS series, ARCOT andARCOTS seriesConsoles andPLPseriesConsoles.Locksandkeyswithanykindofinsert,withcipheringorcustom-made can be supplied upon request.
Code Description
ACC016_KCSTEELTWINCOMBLOCKSTAINLESSSTEEL304(withoutkey)
ACC016_Q_KCPANELINSERTLOCK8mmMADEOFSTAINLESSSTEEL304(withkey)
ACC016_T_KCTRIANGLEINSERTLOCK8mmMADEOFSTAINLESSSTEEL304(withkey)
ACC016_IG_KCLOCKFORHYGIENESTANDARDSMADEOFSTAINLESSSTEEL316(withkey)
ACC017_1_KC WINGLOCKWITHCIPHEREDKEYEK333
ACC017_1_C_KCCHROMIUM-PLATEDWINGLOCKWITHCIPHEREDKEYEK333
ACC018 BLACKZAMAKTWINCOMBKEY
ACC020_KCT-SHAPEDPOLYAMMIDEHANDLE GH=18mmWITHCIPHEREDKEYEK333
ACC016_Q_KCACC016_Q
ACC016_KCACC016
ACC020_KCACC020
ACC018
ACC017_1_C_KCACC017_1_C
ACC016_IG_KCACC016_IG
ACC016_T_KCACC016_T
ACC017_1_KCACC017_1
Code Description
ACC016 STEELTWINCOMBLOCKSTAINLESSSTEEL304(withoutkey)
ACC016_QPANELINSERTLOCK8mmMADEOFSTAINLESSSTEEL304(withkey)
ACC016_TTRIANGLEINSERTLOCK8mmMADEOFSTAINLESSSTEEL304(withkey)
ACC016_IGLOCKFORHYGIENESTANDARDSMADEOFSTAINLESSSTEEL316(withkey)
ACC017_1 WINGLOCKWITHCIPHEREDKEYEK333
ACC017_1_CCHROMIUM-PLATEDWINGLOCKWITHCIPHEREDKEYEK333
ACC018 BLACKZAMAKTWINCOMBKEY
ACC020T-SHAPEDPOLYAMMIDEHANDLE GH=18mmWITHCIPHEREDKEYEK333
VERSION FOR PENDANT CONTROL PANELS AND CONSOLES
KC KCS PLP
VERSION FOR CONSOLE ARCO
TARCO
TS
17 17
ACCESSORIES
DIAGRAM POCKET
KC KCSARCO
TARCO
TS PLP
Madeofself-adhesiveorangeplasticforA4-sizediagrams.
Code Description
ACC028 LARGEDIAGRAMPOCKET(260X240X30)
CONDUCTIVE SEALS
KC KCSARCO
TARCO
TS PLP
Suited to manufacture boxes and special cabinets where there is theneed to reduce the effects of electromagnetic waves.
They are available in both the fitted version (to be mounted on a straight sheetmetaledge)andtheadhesiveone.
Code Description
ACC027_1EMCSEALCOVEREDWITHSATMETFABRIC(EURO/METRE,FITTED)
ACC027_210X4ADHESIVESEALCOVEREDWITHSATMETFABRIC(EURO/METRE)
SWIVEL WHEELS KIT FOR CONSOLE
PLPARCO
TARCO
TS
Kit consisting of 2 swivel wheels and 2 swivel wheels with brakes and AISI304L(WNR1.4307)stainlesssteelsupportandrubbertread.
Code Description
ARCO_SAC011SWIVELWHEELSKITFORARCOT/ARCOTSCONSOLE
PLP_SAC011 SWIVELWHEELSKITFORPLPCONSOLE
18
ACCESSORIES
PROTECTION CAPS KIT FOR CONSOLE VENTILATION/FILTERING SYSTEMS
PLP
To ensure correct ventilation for the internal components, the rear closure flange can be replaced with a stainless steel caps kit to protect thegrilles(“FIL”seriesfilters)fornaturalorforcedventilation(filter+fanofthe“FAN”series)ofastandardsize,115x115.
ThePLP_K2HPS115kit isusedtoensuretheprotectionrating iskeptupto IP55and isperfectly integrated into thedesignof the“PLUMP”console.
BOTTOM TILTED SUPPORT FOR CONSOLE
PLP
Forabetteruseoftheconsole,weprovideasimpleandelegantstainlesssteel supporting surface.
Code Description
PLP_K2HPS115 STAINLESSSTEELCAPFORFILTER/FAN115x115MM
Code Description
PLP_SAC002 BOTTOMTILTEDSUPPORT
Code Description
PLP_SAC008KITOFSTAINLESSSTEEL/POLYAMIDEFEET(no.04feet)H=50/150
LIFTING FEET KIT FOR CONSOLE
PLP
Kit consisting of:•4adjustablefeetwithM12rodmadeofAISI304Lstainlesssteel•Articulatedpolyamide plate that can be anchored to the floor•Screwsfortheassemblystage.
19 19
ACCESSORIES
OPEN DOOR LOCKING DEVICE FOR CONSOLE
PLPARCO
TARCO
TS
Device that keeps thedoorof theARCOT,ARCOTSandPLPseriesConsoleintheopenpositionandpreventsaccidentalclosing.
Itcanbesuppliedinanassemblykitorpre-assembleduponrequest.
Assembly on site might require holes or the application of electro-welded studs.
Code Description
ARCO_ACC048 OPENDOORLOCKFORARCOT/ARCOTSCONSOLE
PLP_ACC048 OPENDOORLOCKFORPLPCONSOLE
WIRING PLATE
KC
WiringplateforKCseriesPendantcontrolpanel,madeofhotgalvanisedsteel sheet.
Forthepositioningvaluesinsidethewall-mountedcontrolcontainer,seethetechnicaldrawingsofKCmodelsinthecatalogue.
Code Description
KP4030WIRINGPLATEFORPENDANTCONTROLPANELKC403015-W=370H=250
KP4535WIRINGPLATEFORPENDANTCONTROLPANELKC453515-W=420H=300
KP5040WIRINGPLATEFORPENDANTCONTROLPANELKC504015-W=470H=350
KP5050WIRINGPLATEFORPENDANTCONTROLPANELKC505015-W=470H=450
KP6040WIRINGPLATEFORPENDANTCONTROLPANELKC604015-W=570H=350
KP6050WIRINGPLATEFORPENDANTCONTROLPANELKC605015-W=570H=450
20
Code Description
GF48 FORØ48MMPIPE
GF60 FORØ60MMPIPE
FIXED JOINT
KC TKCS
Specificstainlesssteelaccessorythatdoesnotallowtherotationofthe supporting arm.
ACCESSORIES
JOINT FIXING BRACKET
KC TKCS
Specificstainlesssteelaccessoryforverticalwall-mountedpipe.
Code Description
M48 FORØ48MMVERTICALWALL-MOUNTEDPIPE
M60 FORØ60MMVERTICALWALL-MOUNTEDPIPE
VERSIONFOR60MMPIPE VERSIONFOR48MMPIPE
4HOLESØ9 4HOLESØ9
4M8HOLES
MAXIMUMOVERALLDIMENSIONS
POSITIONOFTHEPIPEINRELATIONTOTHEJOINT
4M8HOLES
MAXIMUMOVERALLDIMENSIONS
POSITIONOFTHEPIPEINRELATIONTOTHEJOINT
AVAILABLECLEARANCE
GF48:FORØ48PIPE GF60:FORØ60.3PIPE
AVAILABLECLEARANCE
8M8HOLES
21 21
ACCESSORIES
Code Description
GM48 FORØ48MMPIPEFORTHEMACHINESIDE
GM60 FORØ60MMPIPEFORTHEMACHINESIDE
ROTATING JOINT MACHINE SIDE
KC TKCS
Specificstainlesssteelaccessoryforthepipeonthemachineside, which ensures the rotation of the supporting arm and it supports its weight.
Code Description
GS48 FORØ48MMPIPEFORTHEPENDANTCONTROLPANELSIDE
GS60FORØ60MMPIPEFORTHEPENDANTCONTROLPANELSIDE
ROTATING JOINT PENDANT CONTROL PANEL SIDE
KC TKCS
Specificstainlesssteelaccessory for thepipeonthePendantcontrol panel side, which ensures the rotation of the supporting arm.
AVAILABLECLEARANCE
GM48:FORØ48PIPE GM60:FORØ60.3PIPE
4M8HOLES 4M8HOLES
MAXIMUMOVERALLDIMENSIONS MAXIMUMOVERALL
DIMENSIONS
AVAILABLECLEARANCE
AVAILABLECLEARANCE
4M8HOLES 4M8HOLES
MAXIMUMOVERALLDIMENSIONS
MAXIMUMOVERALLDIMENSIONS
AVAILABLECLEARANCE
AVAILABLECLEARANCE
GS48:FORØ48PIPE GS60:FORØ60.3PIPE
22
Code Description
KGM-GS48_180 180°LOCKINGKITFORROTATINGJOINTS–ITEMGM48ANDITEMGS48
KGM-GS60_180 180°LOCKINGKITFORROTATINGJOINTS–ITEMGM60ANDITEMGS60
LOCKING KIT
KC TKCS
180°lockingkitforstainlesssteelrotatingjoints.
DRILLINGTEMPLATEFORØ48JOINT
DRILLINGTEMPLATEFORØ60JOINT
4HOLESØ9 4HOLESØ9
ACCESSORIES
23 23
NOTES NOTES
KC KCS
TRANSPARENT OVERDOOR FOR PENDANT CONTROL PANELS P 14
PLP
TRANSPARENT OVERDOOR FOR PLUMP CONSOLE P 15
ARCO
TARCO
TS
TRANSPARENT OVERDOOR FOR ARCO CONSOLE P 15
KC KCS PLPARCO
TARCO
TS
LOCKS AND KEYS P 16
KC KCS PLPARCO
TARCO
TS
CONDUCTIVE SEALS P 17
KC KCS PLPARCO
TARCO
TS
DIAGRAM POCKET P 17
PLPARCO
TARCO
TS
SWIVEL WHEELS KIT FOR CONSOLE P 17
PLP
LIFTING FEET KIT FOR CONSOLE P 18
PLP
BOTTOM TILTED SUPPORT FOR CONSOLE P 18
PLP
PROTECTION CAPS KIT FOR CONSOLE VENTILATION/FILTERING SYSTEMS P 18
PLPARCO
TARCO
TS
OPEN DOOR LOCKING DEVICE FOR CONSOLE P 19
KC
WIRING PLATE P 19
KC KCS T
JOINT FIXING BRACKET P 20
KC KCS T
FIXED JOINT P 20
KC KCS T
MACHINE SIDE ROTATING JOINT P 21
KC KCS T
PENDANT CONTROL PANEL SIDE ROTATING JOINT P 21
KC KCS T
LOCKING KIT P 22
ACCESSORIES/PRODUCTS TABLE
ACCESSORIESPRODUCTS TABLE
www.mpgamma.com
MPGAMMA S.r.l. Via Cisa Ligure, 43/A
42041 Brescello (RE) - ItaliaT. +39 0522686079F. +39 0522962185
EN-
03-
2017
-R
ev.0
0