EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.
-
Upload
felix-rodgers -
Category
Documents
-
view
235 -
download
4
Transcript of EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.
![Page 1: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/1.jpg)
EMT111EMT111CHAPTER 1CHAPTER 1
Introduction to Introduction to SemiconductorSemiconductor
ByByEn. Rosemizi B. Abd RahimEn. Rosemizi B. Abd Rahim
![Page 2: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/2.jpg)
Introduction to Semiconductor -Introduction to Semiconductor -Chapter Outline :Chapter Outline : 1.1 Atomic Structures 1.2 Semiconductors, Conductors, and Insulators 1.3 Covalent Bonds 1.4 Conduction in Semiconductor 1.5 N-Type and P-Type Semiconductor 1.6 The Diode 1.7 Biasing the Diode 1.8 Voltage Current Characteristic of a Diode 1.9 Diode Models 1.10 Testing a Diode
![Page 3: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/3.jpg)
Introduction to Semiconductor -Introduction to Semiconductor -Chapter Objectives :Chapter Objectives :
Discuss basic operation of a diode
Discuss the basic structure of atoms
Discuss properties of insulators, conductors and semiconductors
Discuss covalent bonding
Describe the properties of both p and n type materials
Discuss both forward and reverse biasing of a p-n junction
![Page 4: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/4.jpg)
1.11.1 Atomic Structures Atomic Structures History of SemiconductorHistory of Semiconductor
![Page 5: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/5.jpg)
ATOM
basicstructure
Atomicnumber
Electron shells
Valence electron
Free electron
ionization
1.11.1 Atomic Structures Atomic Structures
![Page 6: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/6.jpg)
An atom is a smallest particle of an element.
contain 3 basic particles:
Protons (positive charge)
Neutrons (uncharged)
Nucleus(core of atom)
Electrons(negative charge)
ATOM
1.11.1 Atomic Structures Atomic Structures
![Page 7: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/7.jpg)
This model was proposed by Niels Bohr in 1915.
• electrons circle the nucleus.
• nucleus made of:
i) +protons
ii) Neutral:neutron
Bohr model of an Bohr model of an atomatom
1.11.1 Atomic Structures Atomic Structures
![Page 8: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/8.jpg)
Atomic NumberAtomic Number Element in periodic table are arranged according to atomic number Atomic number = number of protons in nucleus At balanced (neutral) atom, number of electron= number of protons
1.11.1 Atomic Structures Atomic Structures
Hydrogen = group 1 Helium = group 2
![Page 9: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/9.jpg)
Electron Shells and OrbitsElectron Shells and Orbits- The orbits are group into energy bands - shells - Valence - the outermost shell , electrons in this shell – valence electrons- Valence electrons contribute to chemical reactions and bonding within the structure of
material and determine its properties.- Diff. in energy level within a shell << diff. an energy between shells- Energy increases as the distance from the nucleus increases.
1.11.1 Atomic Structures Atomic Structures
![Page 10: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/10.jpg)
Valence ElectronsValence Electrons- Electrons with the highest energy levels exist in the outermost shell. - Electron in the valence shell called valence electrons.- The term valence is used to indicate the potential required to removed any
one of these electrons.
1.11.1 Atomic Structures Atomic Structures
![Page 11: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/11.jpg)
IonizationIonization
- A process of an atom either losing or gaining an electron to become positive ion or negative ions.
- For example,
i) Positive ion - in a neutral hydrogen atom, the valence electron acquires a sufficient amount of energy to jump out from the outmost shell, this will leave the atom with less number of electron and more a proton. (H become H+)
ii) Negative ion – a free electron fall into the outer shell of a neutral hydrogen atom. (H become H-)
1.11.1 Atomic Structures Atomic Structures
![Page 12: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/12.jpg)
Number of electrons in each shellNumber of electrons in each shell
Number of electrons (Ne) that can exist in each shell of an atom can be calculated by
the formula:
Ne=2n2
n is the number of shell
1.11.1 Atomic Structures Atomic Structures
![Page 13: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/13.jpg)
1.2 Semiconductors, Conductors and Insulators
![Page 14: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/14.jpg)
ConductorsConductorsmaterial that easily conducts electrical current.The best conductors are single-element material (copper, silver, gold, aluminum) One valence electron very loosely bound to the atom- free electron
InsulatorsInsulators material does not conduct electric current valence electron are tightly bound to the atom – less free electron
1.2 Semiconductors, Conductors and Insulators
SemiconductorsSemiconductors material between conductors and insulators in its ability to conduct electric current
in its pure (intrinsic) state is neither a good conductor nor a good insulator
most commonly use semiconductor ; silicon(Si), germanium(Ge), and carbon(C).
contains four valence electrons
![Page 15: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/15.jpg)
• Atom can be represented by the valence shell and a core• A core consists of all the inner shell and the nucleus
Carbon atom:-valence shell – 4 e-inner shell – 2 eNucleus:-6 protons-6 neutrons
Net charge = +4+6 for the nucleus and -2 for the two inner-shell electrons
1.2 Semiconductors, Conductors and Insulators
![Page 16: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/16.jpg)
Energy Level
1.2 Semiconductors, Conductors and Insulators
• Each discrete shell (orbit) corresponds to a certain energy level.• Electrons are bounded to their respective shells because of the attraction force between proton (+) and electron (-).• The electrons in orbits further from nucleus are less tightly bound (loose) compare to the
atom closer to the nucleus due to the attractive force.• The distance between each shell to the nucleus depends on the energy of the respective
electrons.• Therefore, electrons in the highest energy level exist in the outermost shell of an atom.• Energy level increases as distance from nucleus.
![Page 17: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/17.jpg)
Energy Bands
1.2 Semiconductors, Conductors and Insulators
![Page 18: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/18.jpg)
Energy Bands
•Energy gap-the difference between the energy levels of any two orbital shells•Band-another name for an orbital shell (valence shell=valence band)•Conduction band –the band outside the valence shell
1.2 Semiconductors, Conductors and Insulators
![Page 19: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/19.jpg)
Energy Bands
at room temperature 25°
eV (electron volt) – the energy absorbed by an electron when it is subjected to a 1V difference of potential
1.2 Semiconductors, Conductors and Insulators
![Page 20: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/20.jpg)
Comparison of a Semiconductor Atom & Conductor Atom
A Copper atom:•only 1 valence electron•a good conductor•Electron conf.:2:8:18:1
A Silicon atom:•4 valence electrons•a semiconductor•Electron conf.: 2:8:4
14 protons14 nucleus10 electrons in inner shell
29 protons29 nucleus28 electrons in inner shell
1.2 Semiconductors, Conductors and Insulators
![Page 21: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/21.jpg)
1-3 Covalent BondingCovalent bonding – holding atoms together by sharing valence electrons
To form Si crystalsharing of valence electronproduce the covalent bond
1.3 Covalent Bonding
![Page 22: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/22.jpg)
The result of the bonding:
1. The atom are held together forming a solid substrate2. The atoms are all electrically stable, because their valence shells are complete3. The complete valence shells cause the silicon to act as an insulator-intrinsic (pure) silicon is a very poor conductor
1.3 Covalent Bonding
![Page 23: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/23.jpg)
Certain atoms will combine in this way to form a crystal structure. Silicon and Germanium atoms combine in this way in their intrinsic or pure state.
Covalent bonds in a 3-D silicon crystal
1.3 Covalent Bonding
![Page 24: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/24.jpg)
FIGURE 1-10 Energy band diagram for a pure (intrinsic) silicon crystal with unexcited atoms. There are no electrons in the conduction band.
1.4 Conduction in Semiconductor (Conduction Electron and holes)
![Page 25: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/25.jpg)
FIGURE 1-11 Creation of electron-hole pairs in a silicon crystal. Electrons in the conduction band are free.
Absorbs enough energy (thermal energy)to jumps
a free electron andits matching valence band hole
1.4 Conduction in Semiconductor (Conduction Electron and holes)
![Page 26: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/26.jpg)
FIGURE 1-12 Electron-hole pairs in a silicon crystal. Free electrons are being generated continuously while some recombine with holes.
1.4 Conduction in Semiconductor (Conduction Electron and holes)
![Page 27: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/27.jpg)
FIGURE 1-13 Electron current in intrinsic silicon is produced by the movement of thermally generated free electrons.
Electron current
Apply voltage
freeelectrons
1.4 Conduction in Semiconductor (Electron and holes currents)
![Page 28: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/28.jpg)
FIGURE 1-14 Hole current in intrinsic silicon.
movementof holes
1.4 Conduction in Semiconductor (Electron and holes currents)
![Page 29: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/29.jpg)
Trivalent Impurities:
•Aluminum (Al)
•Gallium (Ga)
•Boron (B)
•Indium (In)
Pentavalent Impurites:
•Phosphorus (P)
•Arsenic (As)
•Antimony (Sb)
•Bismuth (Bi)
Doping -the process of creating N and P type materials
-by adding impurity atoms to intrinsic Si or Ge to imporove the
conductivity of the semiconductor
-Two types of doping – trivalent (3 valence e-) & pentavalent (5 valence e-)
p-type material – a semiconductor that has added trivalent impurities
n-type material – a semiconductor that has added pentavalent impurities
1.5 N-types and P-types Semiconductors (Doping)
![Page 30: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/30.jpg)
n -type semiconductor:- Pentavalent impurities are added to Si or Ge, the result is an increase the free electrons.- Example Pentavalent: Antimony(Sb), Phosphorus(Ph), Arsenic(As), Bismuth(Bi)- Extra electrons becomes a conduction electrons because it is not attached to any atom- No. of conduction electrons can be controlled by the no. of impurity atoms- Pentavalent atom gives up (donate) an electron - call a donor atom- Current carries in n-type are electrons – majority carries- Holes – minority carries
Pentavalent impurity atom in a Si crystal
Sb impurity atom
1.5 N-types and P-types Semiconductors
![Page 31: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/31.jpg)
P-type semiconductor:- Trivalent impurities are added to Si or Ge to create a deficiency of electrons or hole charges- Example Trivalent : Boron(B), Aluminium(Al), Gallium(Ga), Indium(In) - The holes created by doping process- The no. of holes can be controlled by the no. of trivalent impurity atoms- The trivalent atom is take (accept) an electron- acceptor atom- Current carries in p-type are holes – majority carries- electrons – minority carries
Trivalent impurity atom in a Si crystal
B impurity atom
1.5 N-types and P-types Semiconductors
![Page 32: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/32.jpg)
-n-type material & p-type material become a diode (pn junction) when joined together -p region- majority carriers - holes minority carriers - electron-n region - majority carriers – electron minority carriers - holes- before the pn junction is formed -no net charge (neutral)
1.6 The Diode
![Page 33: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/33.jpg)
1.6 The Diode (The Depletion Region)
- Depletion region – the area around a pn junction that is depleted of free carriers due to diffusion across the junction
-Also known as depletion layer.
When an n-type material is joined with a p-type material:1. A small amount of diffusion occurs across the junction.2. When e- diffuse into p-region, they give up their energy and fall into the holes in the valance band covalent bonds.3. Since the n-region have lost an electron, they have an overall +ve charge.4. Since the p-region have gained an electron, they have an overall –ve charge.5 The difference in charges on the two sides of the junction is called the barrier potential. (typically in the mV range)
![Page 34: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/34.jpg)
Barrier Potential:• The buildup of –ve charge on the p-region of the junction and of
+ve charge on the n-region of the junction-therefore difference of potential between the two sides of the junction is exist.
• The forces between the opposite charges form a “field of forces "called an electric field.
• This electric field is a barrier to the free electrons in the n-region need energy to move an e- through the electric field.
• The potential difference of electric field across the depletion region is the amount of voltage required to move e- through the electric field. [ unit: V ]
• Depend on: type of semicon. material, amount of doping, temperature. (e.g : 0.7V for Si and 0.3 V for Ge at 25°C)
1.6 The Diode (The Depletion Region)
![Page 35: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/35.jpg)
Energy level for n-type << p- type material (diff. in atomic characteristic : pentavalent & trivalent)
After cross the junction, the e- lose energy & fall into the holes in p-region valence band.
As the diffusion continues, the depletion region begins to form and the energy level of
n-region conduction band decrease. Soon, no more electrons left in n-region conduction band with enough
energy to cross the junction to p-region conduction band. Figure (b), the junction is at equilibrium state, the depletion region is
complete diffusion has ceased (stop).
1.6 The Diode (Energy Diagram of the PN Junction and Depletion Region)
![Page 36: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/36.jpg)
At equilibrium state – no electron move through the pn-junction. Bias is a potential applied (dc voltage) to a pn junction to obtain a desired
mode of operation – control the width of the depletion layer Two bias conditions : forward bias & reverse bias
Depletion Layer Width
Junction Resistance
Junction Current
Min Min Max
Max Max Min
The relationship between the width of depletion layer & the junction current
1.7 Biasing The Diode (Bias)
![Page 37: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/37.jpg)
•Voltage source or bias connections are + to the p material and – to the n material
•Bias must be greater than barrier potential (0 .3 V for Germanium or 0.7 V for Silicon diodes)
•The depletion region narrows.
•R – limits the current to prevent damage for diode
Diode connection
Flow of majority carries and the voltage across the depletion region
•The negative side of the bias voltage push
the free electrons in the n-region -> pn
junction•Also provide a continuous flow of electron
through the external connection into n-region•Bias voltage imparts energy to the free e- to move to p-region •Electrons in p-region loss energy- positive side of bias voltage source attracts the e- left the p-region•Holes in p-region act as medium or pathway for these e- to move through the p-region
1.7 Biasing The Diode ( Forward Bias)
![Page 38: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/38.jpg)
As more electrons flow into the depletion region, the no. of +ve ion is reduced.
As more holes flow into the depletion region on the other side – the no. of –ve
ions is reduced.
Reduction in +ve & -ve ions – causes the depletion region to narrow
1.7 Biasing The Diode ( The Effect of Forward Bias on the Depletion Region)
![Page 39: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/39.jpg)
Electric field between in depletion region prevent free e- from diffusing at equilibrium state -> barrier potential
When apply forward bias – free e- enough energy to cross the depletion region
Electron got the same energy = barrier potential to cross the depletion region
An add. small voltage drop occurs across the p and n regions due to internal resistance of material – called dynamic resistance – very small and can be neglected
1.7 Biasing The Diode ( The Effect of the Barrier Potential during Forward Bias)
![Page 40: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/40.jpg)
•Condition that prevents current through the diode
•Voltage source or bias connections are – to the p material and + to the n material
•Current flow is negligible in most cases.
•The depletion region widens
Diode connection
Shot transition time immediately after reverse bias voltage is applied
•+ side of bias pulls the free electrons in the n- region away from pn junction• cause add. +ve ions are created , widening the depletion region•In the p-region, e- from – side of the voltage source enter as valence electrons •e- move from hole to hole toward the depletion region, then created add. –ve ions. •As the depletion region widens, the availability of majority carriers decrease
1.7 Biasing The Diode ( Reverse Bias)
![Page 41: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/41.jpg)
• extremely small current exist
• small number of free minority e- in p region are “pushed” toward the pn junction by the –ve bias voltage
• e- reach wide depletion region –combine with minority holes in n -region – create small hole current
1.7 Biasing The Diode ( Reverse Current)
![Page 42: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/42.jpg)
-When a forward bias voltage is applied – current called forward current,
-In this case with the voltage applied is less than the barrier potential so the diode for all practical purposes is still in a non-conducting state. Current is very small.
-Increase forward bias voltage – current also increase
FI
FIGURE 1-26 Forward-bias measurements show general changes in VF and IF as VBIAS is increased.
1.8 Voltage-Current Characteristic of a Diode ( V-I Characteristic for forward bias)
![Page 43: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/43.jpg)
-With the applied voltage exceeding the barrier potential (0.7V), forward current begins increasing rapidly.
-But the voltage across the diode increase only above 0.7 V.
FIGURE 1-26 Forward-bias measurements show general changes in VF and IF as VBIAS is increased.
1.8 Voltage-Current Characteristic of a Diode ( V-I Characteristic for forward bias)
![Page 44: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/44.jpg)
-Plot the result of measurement in Figure 1-26, you get the V-I characteristic curve for a forward bias diode
- Increase to the right
- increase upward
FFd IVr /'
dynamic resistance r’d decreases as you move up the curve
FV
FI
VVF 7.0
zerobias
VVF 7.0
1.8 Voltage-Current Characteristic of a Diode ( V-I Characteristic for forward bias)
![Page 45: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/45.jpg)
Reverse Current
Breakdown voltage-not a normal operation of pn junction devices- the value can be vary for typical Si
1.8 Voltage-Current Characteristic of a Diode ( V-I Characteristic for Reverse bias)
![Page 46: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/46.jpg)
Combine-Forward bias& Reverse bias CompleteV-I characteristic curve
1.8 Voltage-Current Characteristic of a Diode ( Complete V-I Characteristic curve)
![Page 47: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/47.jpg)
• Forward biased dioed : for a given value of
• For a given
• Barrier potential decrease as T increase
• Reverse current breakdown – small & can be neglected
FIT ,
FV
FF VI ,
1.8 Voltage-Current Characteristic of a Diode ( Temperature effect on the diode V-I Characteristic)
![Page 48: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/48.jpg)
Directional of current
cathodeanod
1.9 Diode Models ( Diode structure and symbol)
![Page 49: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/49.jpg)
DIODE MODEL
The Ideal Diode Model
The Complete Diode Model
The Practical Diode Model
1.9 Diode Models
![Page 50: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/50.jpg)
•Assume •Forward current, by Ohm’s law
Ideal model of diode- simple switch:
•Closed (on) switch -> FB
•Open (off) switch -> RB
VVF 0
LIMIT
BIASF R
VI
BIASR
R
VV
AI
0
(1-2)
1.9 Diode Models ( The ideal Diode model)
![Page 51: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/51.jpg)
•Adds the barrier potential to the ideal switch model
• ‘ is neglected
•From figure (c):
The forward current [by applying Kirchhoff’s voltage low to figure (a)]
Ohm’s Law
dr '
•Equivalent to close switch in series with a small equivalent voltage source equal to the barrier potential 0.7V
•Represent by produced across the pn junction
FV
•Same as ideal diode model
)(3.0
)(7.0
GeVV
SiVV
F
F
0LIMITRFBIAS VVV
LIMITFR RIVLIMIT
LIMIT
FBIASF R
VVI
BIASR
R
VV
AI
0
(1-3)
1.9 Diode Models ( The Practical Diode model)
![Page 52: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/52.jpg)
Complete model of diode consists:
•Barrier potential
•Dynamic resistance,
•Internal reverse resistance,
•The forward voltage:
•The forward current:
dr '
Rr '•acts as closed switch in series with barrier potential and small
dr 'Rr '
•acts as open switch in parallel with the large
'7.0 dFF rIVV
'
7.0
dLIMIT
BIASF rR
VVI
(1-4)
(1-5)
1.9 Diode Models ( The Complete Diode model)
![Page 53: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/53.jpg)
10V10V
1.0kΩ1.0kΩ
5V5V
1.0kΩ1.0kΩ
(1) Determine the forward voltage and forward current [forward bias] for each of the diode model also find the voltage across the limiting resistor in each cases. Assumed rd’ = 10 at the determined value of forward current.
1.9 Diode Models ( Example)
![Page 54: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/54.jpg)
a)a) Ideal ModelIdeal Model::
b)b) Practical ModelPractical Model::
(c) (c) Complete model:Complete model:
VARIV
mAV
R
VI
V
LIMITFR
BIASF
F
LIMIT10)101)(1010(
101000
10
0
33
VARIV
mAVV
R
VVI
VV
LIMITFR
LIMIT
FBIASF
F
LIMIT3.9)101)(103.9(
3.91000
7.010)(
7.0
33
VkmARIV
mVmAVrIVV
mAk
VV
rR
VVI
LIMITFR
dFF
dLIMIT
BIASF
LIMIT21.9)1)(21.9(
792)10)(21.9(7.07.0
21.9101
7.0107.0
'
'
1.9 Diode Models ( Example)
![Page 55: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/55.jpg)
Diodes come in a variety of sizes and shapes. The design and structure isDiodes come in a variety of sizes and shapes. The design and structure is
determined by what type of circuit they will be used in.determined by what type of circuit they will be used in.
1.9 Diode Models ( Typical Diodes)
![Page 56: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/56.jpg)
Testing a diode is quite simple, particularly if the multimeter used has a diode check function. With the diode check function a specific known voltage is applied from the meter across the diode.
K A A K
With the diode check function a good diode will show approximately .7 V or .3 V when forward biased.
When checking in reverse bias the full applied testing voltage will be seen on the display.
1.10 Testing A Diodes ( By Digital multimeter)
![Page 57: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/57.jpg)
Defective Diode
1.10 Testing A Diodes ( By Digital multimeter)
![Page 58: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/58.jpg)
Select OHMs range
Good diode:
Forward-bias: get low resistance reading (10 to 100 ohm)
Reverse-bias: get high reading (0 or infinity)
1.10 Testing A Diodes ( By Analog multimeter – ohm function )
![Page 59: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/59.jpg)
P-materials are doped with trivalent impurities
N-materials are doped with pentavalent impurities P and N type materials are joined together to form a PN junction.
A diode is nothing more than a PN junction.
At the junction a depletion region is formed. This creates barrier which requires approximately .3 V for a Germanium and .7 V for Silicon for conduction to take place.
Diodes, transistors, and integrated circuits are all made of semiconductor material.
Summary
![Page 60: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/60.jpg)
When reversed biased a diode can only withstand so much applied voltage. The voltage at which avalanche current occurs is called reverse breakdown voltage.
There are three ways of analyzing a diode. These are ideal, practical, and complex. Typically we use a practical diode model.
A diode conducts when forward biased and does not conduct when reverse biased
Summary
![Page 61: EMT111 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B. Abd Rahim.](https://reader036.fdocuments.in/reader036/viewer/2022081421/5697bfa91a28abf838c99b93/html5/thumbnails/61.jpg)
1. Describe the difference between:a) n-type and p-type semiconductor materialsb) donor and acceptor impuritiesc) majority and minority carries
2. Predict the voltmeter reading in Figure 2.1. (assumed voltage across the diode is 0.7V, R1= 10kohm, V1 = 5V). Then, calculate current, I.
Figure 2.1
voltmeter
I
Assignment – due : next week class