EMS770 Opacity Monitor
-
Upload
tanveer-shaikh -
Category
Documents
-
view
218 -
download
0
Transcript of EMS770 Opacity Monitor
-
8/6/2019 EMS770 Opacity Monitor
1/4
Environmental Monitor Service, Inc. PO Box 4340, Yalesville, CT 06492
Ph. 203.935.0102, Fax 203.634.6663 Email: [email protected]
EMS770 OPACITY/DUST MONITOR
The EMS770 is an economical modulated single-pass Opacity Monitoring
System with a user friendly microprocessor controller.
Path length 2 to 15 Ft (60 to 457cm)
The precision Green LED single beam Transmitter Solid-State electronic modulated source
provides continuous, low maintenance, precision
measurement of dust or opacity in industrial applications.
An economical Opacity/Smoke Density monitor designed
for easy installation in new and existing crematoriums,
bag houses and duct systems. The EMS770 is an ideal
monitor to meet Title V opacity (smoke) regulations, oven
exhaust, diesel exhaust, duct fire alarm systems. The
optional mg/m3
program provides a split screen display as
well as selectable outputs for mg/m3, opacity and Optical
Density (extinktion).
The standard backlit LCD microprocessor controller
communicates via RS-485 MODBUS, contains 2 current
outputs and has a 7 year battery backup. The industry
leading standard features and quality construction makes the EMS770 the choice for affordable,
quality smoke and dust monitoring. Available options include stainless steel weather covers and
NEMA 1 or NEMA 4 rated enclosures for the controller and sensor electronics.
SEE ALL OF OUR FINE PRODUCTS AT: www.emsct.com
http://htpp//www.emsct.com/http://htpp//www.emsct.com/http://htpp//www.emsct.com/ -
8/6/2019 EMS770 Opacity Monitor
2/4
Environmental Monitor Service, Inc. PO Box 4340, Yalesville, CT 06492
Ph. 203.935.0102, Fax 203.634.6663 Email: [email protected]
EMS770 OPACITY SPECIFICATIONS
Control unit:
Microprocessor Controller 24VDC Power +/-10%
Approvals CE and UL Listed
Panel Mount or Din Rail Compact Size 3.78 X 3.78 x 5.52 (96 x 96 x 64 mm)
Environment IP65/NEMA4X (for panel, when mounted)
Dis la LCD Back Li ht
Communications RS/485 Port Supports MODBUS Protocol
Memory Backup Battery 7 years typical
Outputs Two 4-20mA, Opacity field programmable full scale
Relays 6, SPST relays for alarms, 120VAC or DC
High Opacity Alarm 1 relay, display icon, adjustable set point and adjustable delay
Early Warning Alarm 2 relays, display icon, adjustable set point
Boiler Shut Off 1 relay high opacity alarm triggers a boiler shut off relay contact
Audible Alarm 1 relay triggered by the high opacity with reset push button to sil
Air Purge Alarm 1 relay, digital input for indication and alarming for loss of air flow
Ambient Temperature +4 to +52o C (+40 to + 125o F)
Sensor electronics: 115 VAC 50/60 Hz 1 am +10%;
230 VAC, 50/60 Hz, 0.5 amp +10%
Sensors:
Enclosure NEMA-1
Receiver over all 6.75 x 2.0 inch (17 x 5.0 cm)
Transmitter over all 6.75 x 2.0 inch (17 x 5.0 cm)
Lens clean air inlet 1/8 inch N.P.T.
-
8/6/2019 EMS770 Opacity Monitor
3/4
Environmental Monitor Service, Inc. PO Box 4340, Yalesville, CT 06492
Ph. 203.935.0102, Fax 203.634.6663 Email: [email protected]
Optical System Single Pass
Transmitter/Receiver Transmitter: 1.25 Lbs (0.56kg), Receiver: 0.9 Lbs (0.41kg)
Li ht Source LED Green LED > 6 ears
Ambient Tem erature From +4 to +52o C +40 to + 125o F
Process Gas Up to 750o F (400 o C), standard (higher available-contact facto
Mounting Flanges Mounts to 1 inch pipe nipple (NPT) - Others available
Ambient Li ht Immunit Solid-state electronic LED modulation
Wirin 2 air twisted shielded cable, 22 AWG
Design and performance:
Peak and Mean Spectral
Res onse
Photopic; 515 to 585 nm, less than 10% of peak response outsid
desired 400 to 700 nm re ion.
An le of View < 6.0 o from o tical axis
An le of Pro ection < 6.0 o from o tical axis
Accurac +/- 3% o acit to 88% o acit , +/- 5% o acit from 89% to 100%
Res onse time < 5 second
* Calibration check Externalwith span filter and clear condition zero adjustments.* Optional equipment
-
8/6/2019 EMS770 Opacity Monitor
4/4