eMOBILITY - abl- · PDF fileeMOBILITY CHARGING STATIONS ... Circuit protection devices RCCB,...
Transcript of eMOBILITY - abl- · PDF fileeMOBILITY CHARGING STATIONS ... Circuit protection devices RCCB,...
eMOBILITYCHARGING STATIONS FOR ELECTRIC VEHICLES
YOUR MOBILITY. OUR TECHNOLOGY.
COMPACT SIZEBIG PERFORMANCE
eMH1
eMH1 ELECTRiC MObiLiTY HOME 1CHARGING STATIONS
Specifications EVSE501 EVSE502 EVSE503
Compliance According to IEC 61851-1/22
Power supply (1) single-phase 230 V / 16 A, 50 Hz 3-phase 400 V / 16 A, 50 Hz single-phase 230 V / 16 A, 50 Hz
Supply voltage 230 V 230 V / 400 V 230 V
Output current 16 A 16 A 16 A
Max. charging capacity 3.6 KW 11 KW 3.6 KW
Recharge socketIEC 62196-2 compliant
- Type 2 -
Recharge Connectorcomplies with IEC 62196-2
- - Type 2
Recharge Connector complies with SAE1772 Type 1 - -
Charging cable Standard cable,Length: 5 m
-Standard cable,
Length: 5 m
Circuit protection devices RCCB, type A, 30 mA RCCB, type B, 30 mA RCCB, type A, 30 mA
EVCC Control unit IEC 61851-1 Mode 3 compliant, RS485-interface
Terminals up to 2.5 mm2
Ambient temperature -25°C to 50°C
Storage temperature -30°C to 85°C
Relative humidity 5 to 95% (no condensation)
Protection rating I
Overvoltage category III
Protection rating housing IP54
Dimensions in mm h = 272, w = 220, d = 106
Weight / unit 2920 g 2270 g 3950 g
(1) Connection to domestic distribution box only via independent supply cable and separate Type B RCB You can find circuit protection devices for external installations in our main catalogue.
Our eMH1 is the smallest charging station available worldwide, which makes it the perfect so-lution for your garage. Attractive and compact space-saving design. The housing is made from impact-resistant and weatherproof plastic, making the eMH1 suitable for outdoor and carport in-stallations as well. The unit is preconfigured and ready for use, it simply needs to be connected by your electrician. The available charge current is individually adjustable, depending on the current permitted by your domestic supply. Your vehicle is charged gently and efficiently, maximizing the life of your battery.
· Preconfigured and ready to install· LEDs indicate charging status· Lockable cover (access to switching devices)· Integrated circuit protection devices· can be networked with other charging stations via RS485 interface
220 116
272
ABL WallboxEPH II22.02.2012, Ros.
220 116
272
ABL WallboxEPH II22.02.2012, Ros.
220 116
272
powered byeMH2OUR POWER PACKFOR PEAK PERFORMANCE
Specifications EVSE131 EVSE231 EVSE234
Complies with IEC 61851-1/22
Power supply single-phase 230 V / 16 A, 50 Hz 3-phase 400 V / 32 A, 50 Hz 3-phase 400 V / 16 A, 50 Hz
Supply Voltage 230 V 400 V 400 V
Power Supply 16 A 16 A 16 A
Max. recharge load 3.6 KW 11 KW 11 KW
Recharge SocketMode 3, IEC 62196-2
- Type 2 -
Recharge ConnectorMode 3, IEC 62196-1
- - Type 2
Recharge Connector acc. to SAE 1772
Type 1 - -
Charger CableMode 3, IEC 62196-2
Standard cable,Length 5 Metres
-Standard cable,Length 5 Metres
Circuit protection devices RCBO, type A, 30 mA RCCB, type B, 30 mA, MCB RCCB, type B, 30 mA, MCB
EVCC Control Unit complies with IEC 61851-1 Mode 3, RS485-Interface
Connector Clamps up to 4 mm2
Ambient Temperature -25°C to 50°C
Storage Temperature -30°C to 85°C
Humidity, relative 5 to 95% (no condensation)
Protection Rating I
Overvoltage Category III
Protection Rating Housing IP54
Dimensions in mm h = 435, w = 320, d = 192
Weight / each 2900 g to 4900 g, depending on version
eMH2 ELECTRiC MObiLiTY HOME 2CHARGING STATIONS
· Charging station preconfigured and ready to install· LEDs indicate charging status· Lockable lid (access to switching devices)· Integrated circuit protection devices· ON/OFF switch for charging station and for interrupting the recharge process· can be networked with other charging stations via RS485 interface
When you need a fast recharge, the eMH2 is the right choice. Charging time is reduced considerably thanks to a charging capacity of up to 22 kW. The available charge current is individually adjustable, depending on the current permitted by your domestic supply. Perfect for private and semi-public areas such as underground and undercover, hotel and company car parks. Thanks to its weatherproof housing, the eMH1 is also suitable for outdoor and carport installations. The eMH2 is pre-assembled for installation and ready for use.
322
0
435
192
e.on WallboxEPH I22.02.2012
322
0
435
192
e.on WallboxEPH I22.02.2012
322 192
435
eMCTHE SLEEK SOLUTIONFOR PUBLIC AREAS
Type EVSE301
Regulations acc. to IEC 621962
Supply voltage 230 V / 50 Hz
Power supply/ max. charging current
16 A
Charging socket DIN 49440 compliant SCHUKO socket
Display LCD, 2 lines
Interface Ethernet RJ45
User identification RFID 13,56 MHz (MIFARE)
User data storage Compaq-Flashkarte
Circuit protection devicesPreconfigured and ready to install
with RCBO, type A, 16 A, 30 mA, power meter and contactor
Connecting terminals bis 4 mm2
Storage temperature - 30 °C…+ 85 °C
Ambient temperature when used - 20 °C…+ 40 °C
Humidity, relative 5…95 % (no condensation)
Protection class I
Overvoltage category II
Resistance class I
Degree of protection for casing IP54
Dimensions 503 x 134 x 126 mm
Gewicht/Stück 4.000 g
· Access via RFID card· protected by FI/LS-switch (RCBO)· integrated energy meter
The eMC is a compact, rugged and weatherproof solution for semi-public areas such as underground and undercover, hotel and com-pany car parks. Users simply unlock the station with a chip card and charge their vehicle while parked. An LCD screen indicates the station’s current operating status.
eMC ELECTRiC MObiLiTY CiTYCHARGING STATION
Discover our entire product range:Catalogue ordering and further information available on our websitewww.abl-sursum.com
TYPE 2 RECHARGE SOCKET
complies with IEC 621962 · 32 A 240 / 415 V AC · signal contact 2 A 30 V DCwith electrical locking solenoid · 12 V / 200 mA DC solenoid · splash proof (IP44)
SIGNAL CONTACTFOR SOCKET OUTLETS1561.../1562... UNd 1661.../1662...16 A / 250 V AC · Signal switch1 change-over relay · 5 A / 250 V AC3 A / 0-30 V DC
TYPE 2 RECHARGE CABLE
complies with IEC 621962 · 32 A 240 /415 V AC · Length: 3 m · splash proof (IP44)
ART.-NO. WEIGHT g / UNIT
UNITS /PACK
LAK32A3 2.200 1
AdAPTER CABLE · TYPE 1 TO TYPE 232 A 230 V AC · Length: 5 msplash proof (IP44)
ART.-NO. WEIGHT g / UNIT
UNITS /PACK
LAKT2T1 1.200 1
ART.-NO. WEIGHT g / UNIT
UNITS /PACK
SUB-UNITS
EVCC 220 3 4
complies with IEC 61851-1 Mode 3 Charge current preset at 16 A · Ad-justable from 6 A to 80 A via serial interface
EVCC CONTROL UNITThe EVCC is the core module built into our charging stations and responsible for communication with the electric vehicle. The charging procedure complies with IEC 61851-1 Mode 3. Potential-free swit-ching contacts are used for load relay (EV supply), to lock charge connectors and for external cooling control. Two ex-ternal LEDs can be connected without additional dropping resistors and indi-cate the current system status of the charging station. Default and target charge current are set using a network-ready RS485 serial interface and allow load management. The target current can be adjusted, even during the char-ging process.
ART.-NO. WEIGHT g / UNIT
UNITS /PACK
LAD32AV 350 1
ART.-NO. WEIGHT g / UNIT
UNITS /PACK
SW23C2 10 10
ART.-NO. WEIGHT g / UNIT
UNITS /PACK
RA4303 500 1
RESIdUAL CURRENT CIRCUIT BREAKER RCCB
Residual Current Circuit Breaker (RCCB) · Universal current Type B4-pole short-delay triggered switching
COMPONENTSFOR CHARGING STATION
COMPACTPOWERFULiNTELLiGENT
ABL SURSUM Bayerische Elektrozubehör GmbH & Co. KG
Ottensooser Straße 2291207 Lauf / Pegnitz
Postfach 10 02 4791192 Lauf / Pegnitz
Telefon +49 (0) 9123 188-0Telefax +49 (0) 9123 188-188 0000038 / 05.2013
Worldwide leadership in connecting and protecting power
Made in Germany