V450UC specifications and design liable to modifications without prior notice 1/5

V450UC DIESEL GENSETMODEL V450UC

Stand-by Power @ 60Hz 450kW / 563 kVA Prime Power @ 60Hz 409 kW / 511 kVA

Standard Features

General features :

Engine (VOLVO , TAD1640GE ) Engine EPA Carb Charge alternator 24 V ,

Governor:Electronique Alternator (LEROY SOMER , LSA472S5 ) Single bearing alternator IP 23 , insulation class H /H Radiator 50C [122F]C max. T air inlet with coolant

cap Skid and vibration isolators Dry type air filter Main line circuit breaker Microprocessor control panel 24 V battery, rack and cable Industrial silencer (loose) User manual ^pCSA Certified (consult us)

Generator Ratings

Voltage HZ Phase P.F Standby Amps Standby RatingskW/kVA

Prime RatingskW/kVA

480/277 60 3 0.8 677 450 / 563 409 / 511440/254 60 3 0.8 739 450 / 563 409 / 511240/120 60 3 0.8 1289 429 / 536 390 / 487230/115 60 3 0.8 1290 411 / 514 374 / 467220/127 60 3 0.8 1478 450 / 563 409 / 511208/120 60 3 0.8 1488 429 / 536 390 / 487600/347 60 3 0.8 542 450 / 563 409 / 511

PRP : Prime Power is available for an unlimited number of annual operating hours in variable load applications, in accordance with ISO 8528-1. A10% overload capability is available for a period of 1 hour within 12-hour period of operation, in accordance with ISO 3046-1ESP : The standby power rating is applicable for supplying emergency power in variable load applications in accordance with ISO 8528-1. Overload isnot allowed.

Conditions of sale

SDMO provides a full line of products with high qualityrecognized engines and alternators.

Service and parts are available from SDMO distributors as asingle source of responsibility.

Each and every units is factory tested. All generator sets arealso prototype tested.

Warranty according to our standard conditions. Five yearsextended also available

V450UC specifications and design liable to modifications without prior notice 2/5

ENGINE DATAManufacturer / ModelCylinder Arrangement

DisplacementBore and Stroke

Compression ratioRated RPM

Piston SpeedMax. stand by Power at rated RPMFrequency regulation, steady state

BMEPGovernor : type

VOLVO TAD1640GE , 4-cycle, Turbo , N/A6 X L

16.12L [983.7C.I.]144mm [5.7in.] X 165mm [6.5in.]

17.5 : 11800 Rpm

9.9m/s [32.5ft./s]479kW [642BHP]

+/-0, 5%17.78bar [258psi]Electronique

Exhaust SystemExhaust gas flow

Exhaust temperatureMax back pressure

1633L/s [3460cfm] 444C [831F]

1000mm CE [39in. WG] Fuel System

110% (Stand By power )100% (of the Prime Power)75% (of the Prime Power)50% (of the Prime Power)

Total fuel flow

118.33L/h [31.3gal/hr] 104.52L/h [27.6gal/hr] 78.39L/h [20.7gal/hr]54.33L/h [14.4gal/hr] 180L/h [47.6gal/hr]

Oil SystemTotal oil capacity w/filters

Oil Pressure low idleOil Pressure rated RPM

Oil consumption 100% loadOil capacity carter

48L [12.7gal] 0.7bar [10.1psi] 6.5bar [94.2psi]

0.10L/h [0.0gal/hr] 42L [11.1gal]

Thermal balance 100% loadHeat rejection to exhaustRadiated heat to ambiantHeat rejection to coolant

381kW [21664Btu/mn]22kW [1251Btu/mn]

188kW [10690Btu/mn] Air intake

Max. intake restrictionEngine air flow

500mm CE [20in. WG] 710L/s [1505cfm]

Coolant SystemRadiator & engine capacity

Max water temperatureOutlet water temperature

Fan powerFan air flow

Available restriction on air flowType of coolant

Thermostat

60L [15.9gal] 103C [217F] 93C [199F]

15 kW 9m3/s [19072cfm]

20mm CE [0.8in. WG]Glycol-Ethylene

86-96 CEmissionsHCCONoxPM

N/AN/AN/AN/A

V450UC specifications and design liable to modifications without prior notice 3/5

ALTERNATOR SPECIFICATIONS

GENERAL DATA Compliance with NEMA MG21, UTE NF C51.111, VDE 0530, BS

4999, CSA standards. Vacuum-impregnated windings with epoxy varnish. IP21 drip proof.

ALTERNATOR DATAManufacturer / Type

Number of phasePower factor (Cos Phi)

AltitudeOverspeed

Pole : numberExciter type

Insulation : class, temperature riseVoltage regulator

Sustained short circuit currentTotal harmonics (TGH/THC)

Wave form : NEMA = TIF TGH/THCWave form : CEI = FHT TGH/THC

Bearing : numberCoupling

Voltage regulation 0 to 100% loadRecovery time (20% Volt dip) ms

SkVA with 90 % of nominal sustained voltage (at 0.4 PF)

LEROY SOMER LSA472S5 30.8

< 1000 m2250 rpm

4SHUNTH / HR230N/A< 4%< 50< 2%1

Direct+/- 0.5%500 msN/A

OTHER ALTERNATOR DATAContinuous nominal rating @ 40C

Standby rating @ 27CEfficiencies @ 4/4 load

Air flowShort circuit ratio;50 (Kcc)

Direct axis synchro reactance unsaturated (Xd)Quadra axis synchro reactance unsaturated (Xq)

Open circuit time constant;50 (Tdo)Direct axis transient reactance saturated (Xd)

Short circuit transient time constant (Td)Direct axis subtransient reactance saturated (Xd)

Subtransient time constant (Td)Quadra axis subtransient reactance saturated (Xq)

Zero sequence reactance unsaturated (Xo)Negative sequence reactance saturated (X2)

Armature time constant (Ta)No load excitation current (io)Full load excitation current (ic)Full load excitation voltage (uc)

Recovery time (Delta U = 20% transitoire)Motor start (Delta = 20% perm. Or 50% trans.)

Transient dip (4/4 charge) PF : 1.8 ARNo load lossesHeat rejection

531 kVA625 kVA93.9 %

1.1m3/s [2330.76cfm]0.32373 %223 %

1855 ms20.1 %100 ms16 %10 ms21.5 %0.1 %18.8 %15 ms0.9 A3.9 A39 V

500 ms1136 kVA17.3 %8.91 kW29.34 kW

V450UC specifications and design liable to modifications without prior notice 4/5

Control Panels

TELYS

Specifications :Frequency meter, Ammeter, Voltmeter Alarms and faults Oil pressure, water temperature, No start-up,

Overspeed, Min/max alternator, Min/max battery voltage, Low fuel level,Emergency stop

Engine parameters Hours counter, Oil pressure, Watertemperature, Engine speed, Battery voltage, Fuel level

KERYS

Specifications :Frequency meter, Ammeter, Voltmeter Alarms and faults Oil pressure, water temperature, No start-up,

Overspeed, Min/max alternator, Min/max battery voltage, Low fuel level,Emergency stop

Engine parameters Hours counter, Oil pressure, Watertemperature, Engine speed, Battery voltage, Fuel level

Additional specifications Website, Troubleshooting, Assistanceand Maintenance, Plotting and logging, Load impact, 8 configurationsavailable, Compliance with international standards...

M80

Specifications : Tachometer, Emergency stop button, client

connection terminal strip, EC certified Engine parameters :Hours counter, Oil pressure gauge, Water

temperature indicator, Oil pressure indicator

V450UC specifications and design liable to modifications without prior notice 5/5

V450UC specifications and design liable to modifications without prior notice 6/5

Options

Engine and Radiator Alternator Control panel Anti condensation heater NFPA 110 level 1

Heat shield protection Enforced impregnation Paralleling system Oil drain extension Oversized alternator Remote annunciator Heavy duty air filter Oil temperature shutdown

Lube oil drain pump Exhaust Key start panel Radiator core guard Residential silencer Literature Battery charger Critical silencer Parts

Block heater Flexible exhaust conn. Maintenance

Fuel Enclosure Day tank

M229 Subbase fuel tanks UL Silent 0 db @ 7m [23 Ft] (stby)

Water separator fuel filter

Weight and Dimensions

Open Model Excluding option

Overall size l x w x h :3470mm [137in] x 1500mm [59in] x 2043mm [80in]

Weight :3490kg [7692lbs] Net 4030kg [8882lbs] Brut

With Optional Enclosure

Overall size l x w x h :5031mm [198in] x 1560mm [61in] x 2435mm [96in]

Weight :4740kg [10447lbs] Net 5280kg [11637lbs] Brut

V450UC specifications and design liable to modifications without prior notice 7/5

SDMO industries - Head Office 12bis, rue de la Villeneuve CS 92848 - 29228 BREST cedex 2 - FRANCE - www.sdmo.com