7/21/2019 Embody Chairs Adjustment Guide

http://slidepdf.com/reader/full/embody-chairs-adjustment-guide 1/2

ermanMiller Embody® Chair Adjustmen1

Seating thatperorms or you.

HermanMiller 

Embody® Chair 

Seat Depth: Front handles on the right and lef sides o the seat

Seat Height: Joystick inside tilt tension knob, right side o chair 

To increase or decrease depth:

Lif your thigh weight rom the ront

o the seat. Gently lif up the ront

handles on the right and lef sides o

the seat to disengage the locking seatdepth adjustment. Slide seat orward

or back into proper depth or use; then

release downward to lock the seat.

In the proper position, you will have approximately three-fingers of clearance

between the back of your knees and the seat edge.

nly available on some models.

To raise seat:

Angle the joystick ully and lif your

weight to raise the seat height to the

desired level.

To lower seat:

While seated, angle the joystick ully

and lower seat.

 At the proper height, your feet should rest flat on the floor.

Tilt Limiter: Back horizontal tab on lef side behind seat

Tilt Tension: Knob below right side o seat

Only available on some models.

To engage:

Recline and move tab up to define

the limit o recline.

To release:Lean orward and lip tab ully

downward.

Engage the tilt limiter when you want to sit in an upright or partially

reclined position.

To increase tension:

Turn knob clockwise.

To decrease tension:

Turn knob counterclockwise.

Set the tilt tension to control the resistance you feel when leaning back.

7/21/2019 Embody Chairs Adjustment Guide

http://slidepdf.com/reader/full/embody-chairs-adjustment-guide 2/2

Adjustmen2ermanMiller Embody® Chair 

Arm Width:

Arm Height: Button underneath each arm

To raise arms:

Grasp arms while pressing button on

the underside o each armpad and pull

up to desired position. Release button

to lock.

To lower arms:Grasp arms while pressing button on

the underside o each armpad and

lower to desired position. Release

button to lock.

For maximum comfort, your arms should make contact with the arm pad

without any lift at your shoulders.

To adjust arm width:

Place two hands on one armpad to

pull in or push out. Repeat with other

armpad.

In the proper position, your elbows should be in line with your shoulders.

BackFit™ Adjustment: Knob on right side behind seat.

Only available on some models.

For a flat back, rotate forward:

Turn the BackFit adjustment knob

clockwise to the ull orward position

or move it slightly back by turning kno

counterclockwise.

For a curved back, rotate backward:Turn the BackFit adjustment knob

counterclockwise to rotate the back

rearward.

 Adjust the BackFit to position the back of the chair to fit the curvature of yo

entire back, placing your head in a balanced position for alignment with yo

computer display.