Embedded Systems Training,Robotics Training,Microcontroller Training,8051 Course

REMOTE CONTROLLEDEMBEDDED SYSTEM

VIA INTERNETTechogroovy Systems India Pvt Ltd

Embedded Systems & Robotics Projects Based Training www.technogroovy.com

Mail : [email protected]

Cell- +91-7500347448 , +91-7533940322

Summer Training and Robotics Projects

Techogroovy Systems India Pvt Ltd , www.technogroovy.com, Mail :

[email protected]

http://www.technogroovy.com/

By

Arpit Gupta (T3083011) Gaurav Kulkarni (T3083077) Venkatesh Iyer (T3083057)

Under the able guidance of

Mrs. Smita Daphale


[email protected]

INTRODUCTION


[email protected]

NEED FOR AUTOMATION.

REMOTE SENSING OF A ROBOT.

USE OF INTERNET.

WHY PICK AND PLACE?


[email protected]


[email protected]

LITERATURE SURVEY


[email protected]

NEED FOR REMOTE CONTROLLED ROBOT


[email protected]

Construction Works. Nuclear Power Plants. Steel Plants.

Future Scope


[email protected]

SPECIFICATIONS


[email protected]

Microcontroller : AVR ATmega32 Temperature Sensor : LM 35 , 10mV/C LCD : 16 x 2 Motor Driver : L298. Type of Motor : DC Battery : Voltage : 12 V Maximum o/p current : 3.36 A Charging Time : 1.2 Ah


[email protected]

Dimensions of Robot (approx) Length : 25 cm Width : 30 cm Height : 35 cm Length of arm : 30cm

Left ,Right motor : 10 rpm ,12V ,2 kg Other motor : 30 rpm ,12V ,1 kg Total Load Capacity of the robot : 4 kg


[email protected]

WHY THE AVR FAMILY?8051

AVR

8 bit micro based on CISC architecture.

8051 family is slower as compared to AVR.

Does not have a ADC. Instruction set is

large.

JTAG interface absent.

8 bit micro based on RISC architecture.

AVR's are fast, consume little power, are rugged.

It has an inbuilt 10-bit ADC.

Instruction set is simple and compact.

JTAG interface present.


[email protected]

FLOW CHART


[email protected]

START

INITIALISE THE UART & ADC

ACCEPT COMMAND FROM SERVER PC

CHOICE

FORWARD/

REVERSE

MOTION

GRIPPING OF

ROBOTIC ARM

CIRCULAR

MOTION

VERTICAL MOTION

STOP

A

B


[email protected]

A

READ TEMPERATURE FROM SENSOR

CONVERT TO DIGITAL VIA ADC

SEND DATA TO RXD

O/P DATA TO LCD

END COMMUNICATIO

N

STOP

B

Yes

No


[email protected]

Basic working


[email protected]

Yes No


[email protected]


[email protected]

Remote Terminal Used for an authorised client’s access to

robot.

Has a JAVA based client applet running on it. Moniters the temperature. Controls the motions of robot.

Server Machine Acts as an intermediate between robot and

user . Has a JAVA based server applet running on it. Connected via RS-232 to robot.


[email protected]

Microcontroller (AVR Atmega 32) Converts analog signal from sensor to digital. Sends digital data via UART to server PC. Receives control code from user through

server. Controls robot as per the received code. Detects errors ,if any and sends it to LCD.

Temperature Sensor(LM 35) Is a Precision Centigrade Temperature Sensor

with a sensitivity of 10mV/C. Senses temperature and converts into

equivalent analog voltage between -550 to 1500 mV. Techogroovy Systems India Pvt Ltd ,

www.technogroovy.com, Mail : [email protected]

SCHEMATIC


[email protected]

Motor Motor used is a DC motor with an output of

1.18W and operates in 6-12V range. Motor is controlled by an H-bridge in the

driver.

Driver(L298) Is an interface between low power(AVR) and

high power(motor) devices. Contains an inbuilt H-bridge controlled by

AVR.

LCD Used to display temperature and to detect

errors in the robot control.Techogroovy Systems India Pvt Ltd ,

www.technogroovy.com, Mail : [email protected]

REFERENCES


[email protected]

Techogroovy Systems India Pvt Ltd

www.technogroovy.com, Mail: [email protected] Cell- +91-7500347448 , +91-7533940322

Thank You


[email protected]

http://www.technogroovy.com/

Embedded Systems Training,Robotics Training,Microcontroller Training,8051 Course

Education

Transcript of Embedded Systems Training,Robotics Training,Microcontroller Training,8051 Course