Embassy II swall_awning_instr
2
INTERNATIONAL E-Z UP, INC. 1650 Iowa Avenue Suite 200, Riverside, California 92507 USA Voice (909) 426-0060 • Fax (909) 426-0063 www.ezupdirect.com 800-SHADE ME 800-742-3363 DURA LON SIDEWALL INSTRUCTIONS E-Z UP ® Instant Shelters ® 2 (Side) Sidewalls 1 (Rear) Sidewall (Backdoor) 1 (Front) Sidewall Step 1: ATTACHING (SIDE) SIDEWALLS Locate the 2 (side) sidewalls and place them on opposing sides of the shelter; these walls will serve as the sides of the unit. Attach each side- wall to the frame by wrapping the toggle and loop straps (use short loop first) around the frame trusses and the side hook & loop straps around the legs of the frame. Secure the straps by pressing them onto the opposite end of the hook & loop strip. Note: The top of the sidewall tucks in between the shelter’s frame and the valance of the shelter’s top. Step 2: ATTACHING (BACK DOOR) MIDDLE-ZIPPER SIDEWALL Locate the sidewall with the middle- zipper which can be used as a back door. To attach, make sure that the two halves of the sidewall are zipped together; then, follow the instructions under Step 1 above. Step 3: ATTACHING (FRONT) SIDEWALL If the awning is attached simply remove awning material first. (See the Awning Instructions sheet, over the page.) Locate the sidewall with cut-outs at the top corners. Lift the hook & loop flap over the cut-outs and slide the cutouts over the awning bracket arms. Attach the sidewall to the frame by wrapping the top toggle & loop straps around the frame trusses and the side hook & loop straps around the legs of the frame. Secure the straps by pressing them onto the opposite end of the hook & loop strip. Reattach Awning Material when com- plete. Step 4: ENCLOSING THE SHELTER To fully or partially enclose the E-Z UP ® shelter, zip the sidewalls together at each corner of the frame. Step 5: SIDEWALL ROLL-UP FEATURE To use the roll-up feature, unzip the sidewall at each corner. Have two people stand on each end of the sidewall and roll the sidewall up. Once the sidewall has been rolled to the top, secure it by using the long toggle & loop strap. Wrap the strap around the sidewall, over the frame truss, and then hook onto the toggle end. Step 6: RELEASING THE ROLLED-UP SIDEWALLS To drop down the rolled-up sidewalls, release the toggle & loop straps and let the sidewall unroll and drop to the ground. Note: The long toggle loop straps are for the side- wall roll-up fea- ture. The short toggle loop straps are for attaching the sidewall to the frame trusses. Note: When enclosing your shelter and zipping up all 4 sidewalls, it is strongly recommended that you take down the awning and remove the name banner to avoid wind damage. TM Sidewall Components Meet CPAI-84 Fire Requirements
-
Upload
michael-weiler -
Category
Documents
-
view
218 -
download
0
description
Â
Transcript of Embassy II swall_awning_instr
INTERNATIONAL E-Z UP, INC.1650 Iowa Avenue Suite 200, Riverside, California 92507 USA
Voice (909) 426-0060 • Fax (909) 426-0063 www.ezupdirect.com800-SHADE ME8 0 0 - 7 4 2 - 3 3 6 3
DURA LON SIDEWALL INSTRUCTIONSE-Z UP® Instant Shelters®
Covered under one or more of the following patents: 4,607,656; 4,924,896; 5,244,001; 5,421,356; 5,485,863; 5,490,533; 5,511,572; 5,632,292; 5,632,293; 5,794,546; 5,797,412; 5,813,425; 5,865,127; 5,921,260; 5,934,301; 6,041,800; 6,070,604; 6,076,312; 6,129,102; 6,138,702; 6,192,910; 6,230,729; 6,240,940;6,361,057; 6,363,956; 6,374,842; 6,382,224; 6,397,872; 6,412,507; 6,431,193; 6,439,251; 6,470,902; 6,502,597; 6,520,196; 6,601,599; 95704390; 94/2354; 91461; 132167; 95/0693; 95/6140; 95/6141; 84107895; 684,978; 2123096; 190486; 289754; 215344; 701077; 2128935; 2949648; 48648; DE 695 10 919 T2;WO96/03561. International Design Registration No. DM/009515 Benelux Design Registration No. 16959-04. Other US and foreign patents pending. © Copyright 2006 International E-Z UP, Inc. USA. All rights reserved.
2 (Side) Sidewalls 1 (Rear) Sidewall (Backdoor) 1 (Front) Sidewall
Step 1: ATTACHING (SIDE) SIDEWALLSLocate the 2 (side) sidewalls andplace them on opposing sides of theshelter; these walls will serve as thesides of the unit. Attach each side-wall to the frame by wrapping thetoggle and loop straps (use shortloop first) around the frame trussesand the side hook & loop strapsaround the legs of the frame. Securethe straps by pressing them onto theopposite end of the hook & loopstrip.
Note: The top of the sidewalltucks in between the shelter’s frameand the valance of the shelter’s top.
Step 2: ATTACHING (BACK DOOR) MIDDLE-ZIPPER SIDEWALLLocate the sidewall with the middle-zipper which can be used as a backdoor. To attach, make sure that thetwo halves of the sidewall arezipped together; then, follow theinstructions under Step 1 above.
Step 3: ATTACHING (FRONT) SIDEWALLIf the awning is attached simplyremove awning material first. (Seethe Awning Instructions sheet, overthe page.)
Locate the sidewall with cut-outs at thetop corners. Lift the hook & loop flapover the cut-outs and slide the cutouts
over the awning bracket arms. Attachthe sidewall to the frame by wrappingthe top toggle & loop straps aroundthe frame trusses and the side hook &loop straps around the legs of theframe. Secure the straps by pressingthem onto the opposite end of thehook & loop strip.
Reattach Awning Material when com-plete.
Step 4: ENCLOSING THE SHELTERTo fully or partially enclose theE-Z UP® shelter, zip the sidewallstogether at each corner of the frame.
Step 5: SIDEWALL ROLL-UP FEATURETo use the roll-up feature, unzip thesidewall at each corner. Have twopeople stand on each end of thesidewall and roll the sidewall up.Once the sidewall has been rolled tothe top, secure it by using the longtoggle & loop strap. Wrap the straparound the sidewall, over the frametruss, and then hook onto the toggleend.
Step 6: RELEASING THE ROLLED-UP SIDEWALLSTo drop down the rolled-up sidewalls,release the toggle & loop straps andlet the sidewall unroll and drop to theground.
Note: The longtoggle loop strapsare for the side-wall roll-up fea-ture.
The short toggleloop straps arefor attaching thesidewall to theframe trusses.
Note: When enclosingyour shelter and zippingup all 4 sidewalls, it isstrongly recommendedthat you take down theawning and remove thename banner to avoidwind damage.
TM
Sidewall Components Meet CPAI-84 Fire Requirements
NAME BANNER & AWNINGINSTRUCTIONS
E-Z UP® Instant Shelters®
WARNING: Keep all flame and heat sources away from the top, awning and sidewall fabrics. These fabrics meet the flammability require-ments of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to thetent may render the flame-resistant properties ineffective.
How to Set Up your E-ZUP® Name Banner andAwning Accessories
What’s provided:1 x Dura-Lon™ Awning Material1 x Dura-Lon™ Name Banner 2 x Awning poles
ATTACHING NAME BANNER
Step 1: The Name Banner is attached to yourInstant Shelter Top. Locate the fourfabric loops that are sewn into thecorners of the Shelter top. Thenlocate the four plastic hooks into thefabric loops. Be sure to orient thename banner so that the vinyl pocketis facing outwards.
Step 2:The vinyl pocket should be facingoutwards on your name banner.*Simply slide your own signage intovinyl pocket.
*Signage is not included.
PROPACCESS R01 OVO22
ATTACHING AWNINGPOLES
Step 1: Locate the awning banner holes inyour E-Z UP® frame. (Shown oppo-site). You may have one of twotypes of frame but both require theawning pole to be pushed into theframe leg or slider.
ATTACH AWNING FABRICStep 1: Slide awning fabric over the exten-sion arms. Slide the fabric to theend of arm.
Caution:When taking down your E-Z UPShelter be sure to remove theAwning and Name Banner beforeclosing the shelter.
We recommend that all accessoriesbe removed should heavy winds orrain threaten.
