EM516 roof details3 · 2019. 3. 27. · em110 ground floor soleplate em111 soleplate fixing em112...
Transcript of EM516 roof details3 · 2019. 3. 27. · em110 ground floor soleplate em111 soleplate fixing em112...
-
Erection
Manual
The details and information in this book are for guidance of the erection of panels and flooring
only. They are not site specific. Refer to the relevant panel drawings for the site, which should
be read in conjunction with the approved Building Regulation drawings and must be adhered to
and take priority over standard details. For sundry items refer to Sips Eco Panels manual.
ISSUE 8
2014
-
Sips Eco Panels ERECTION MANUAL.
CONTENTS
THIS MANUAL IS FOR GUIDANCE ONLY. IT IS NOT SITE SPECIFIC. YOU MUST REFER TO THE DRAWINGS PROVIDED WITH EACH KIT FOR DETAILS RELEVANT TO THE SITE YOU ARE WORKING ON. SHOULD A DETAIL DIFFER TO SITE
DRAWINGS - SITE DRAWINGS WOULD USUALLY TAKE PREFERENCE. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT A MEMBER OF OUR DESIGN TEAM IN THE FIRST INSTANCE ON 01592 631636 OR THE PROJECT MANAGER.
EM510 ROOF PANEL FIXING
EM511 EAVES DETAILS
EM512 RIDGE DETAILS
EM513 TRUSS FIXING DETAILS
EM514 ROOF DETAILS 1
EM515 ROOF DETAILS 2
EM516 ROOF DETAILS 3
5.00 ROOF DETAILS
EM1 FIXINGS SHEET1
EM2 FIXINGS SHEET 2
GENERAL INFORMATION
1.00 FOUNDATIONS AND GROUND FLOOR DETAILS
EM110 GROUND FLOOR SOLEPLATE
EM111 SOLEPLATE FIXING
EM112 INTERNAL RESTRAINT STRAP FIXING
2.00 EXTERNAL WALL DETAILS
EM210 STOCK EXTERNAL PANEL
EM211 SIPS TO SIPS FIXING
EM212 SIPS TO SIPS ROOF FIXING
EM213 WINDOW COMPONENT AND ASSEMBLY
EM214 SINGLE DOOR COMPONENTS AND ASSEMBLY
EM215 EXTERNAL CORNER WALL DETAILS
3.00 INTERMEDIATE FLOOR DETAILS
EM310 DECK INSTALLATION
EM311 FIRST FLOOR SOLEPLATE
EM312 RIMBEAM PERPENDICULAR TO JOISTS
EM313 RIMBEAM PARALLEL TO JOISTS
EM314 CANTILEVER JOISTS
EM315 JOIST NAILING DETAIL
EM316 JOISTS PARALLEL TO NON LOADBEARING WALL
EM317 LOADBEARING WALL TO FLOOR DETAIL
EM318 NON LOADBEARING WALL PERPENDICULAR TO JOISTS
EM319 HIGH LOAD JOIST TO JOIST CONNECTION
EM320 JOIST TO JOIST CONNECTION
EM321 I JOIST DETAIL 1
EM322 I JOIST DETAIL 2
EM323 I JOIST DETAIL 3
EM324 I JOIST DETAIL 4
EM325 I JOIST DETAIL 5
EM326 I JOIST DETAIL 6
EM327 I JOIST DETAIL 7
EM320 PARTY WALL AT FLOOR JUNCTION
4.00 INTERNAL DETAILS
EM410 STOCK INTERNAL PANELS SHEET 1
EM411 STOCK INTERNAL PANELS SHEET 2
EM412 INTERNAL PANEL TO PANEL
EM413 INTERNAL WALL JUNCTION
EM414 PARTY WALL TO EXTERNAL WALL
CONTENTS
IS
SU
E 8
2014
-
SCREW 41
3.5mm x 35mm grey
phosphate at 150mm c/c
and 50mm in from end.
90 NAILS
90mm x 3.1mm collated
smooth galvanised nails
used to fix internal studs to
internal studs and 45mm
bottom plates to 45mm
soleplates at 600mm c/c.
51 NAILS
51mm x 2.8mm ring
shank galvanised nails
used to fix top plates to
top rails at 600mm c/c
and studs to studs.
TWISTNAIL 35
35mm x 4mm Square
twist nails are used to
fix joist hangers or
truss clips. All holes to
be filled.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
63 NAILS
63mm x 3.1mm ring
shank galvanised nails
used to fix 45mm bottom
plates to 20mm soleplate
at 600mm c/c and studs
to studs.
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
ALSO INCLUDED IN THE PACKAGE ARE 2 ROLLS OF POLYTHENE.
THESE MUST BE USED TO PROTECT MATERIAL AT ALL TIMES.
FIXINGS SHEET 1
EM
1
IS
SU
E 8
2014
-
The tongued-and-groove flooring panels should be laid on top of the joists with the longest edges at right angles. Short end joints
should be staggered by approximately half a board in a brick bond pattern with these ends falling on the centre line of the joist. If
they overhang, additional timber supports or noggings should be provided. Although long edges need no intermediate support
between joists, support noggings should be fixed at floor perimeters where unsupported edges abut a wall.
Laying should start with a single row of panels parallel to the longest wall allowing for a suitably-sized expansion gap (minimum
12 mm) between the wall and edge of the panel. The second row should start with a half panel ensuring the brick bond pattern.
A liberal application of Adhesive should be made to the groove and shoulder of the tongue of the profile joint to the edges of
each panel to ensure that the entire joint is bonded, once the panels are butted tightly together. Any extruded residues should be
left until dry and removed by brushing/scraping.
SST Code
Size(mm) Box Qty
Use
ESCR8.0X80 8.0 x 80mm 50
For wedges and 2ply timber splines
ESCR8.0X100 8.0 x 100mm 50
For wedges
ESCR8.0X120 8.0 x 120mm 50
For wedges
ESCR8.0X140 8.0 x 140mm 50
For wedges
ESCR8.0X180 8.0 x 180mm 50 For 119mm SIPs
ESCR8.0X200 8.0 x 200mm 50 For 144mm SIPs
ESCR8.0X220 8.0 x 220mm 50 For 169mm SIPs
ESCR8.0X260 8.0 x 260mm 50 For 194mm SIPs
FIXINGS SHEET 2
ALSO INCLUDED IN THE PACKAGE ARE 2 ROLLS OF POLYTHENE.
THESE MUST BE USED TO PROTECT MATERIAL AT ALL TIMES.
IS
SU
E 8
2014
EM
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
SOLEPLATES FOR
EXTERNAL WALL
SOLEPLATES FOR
INTERNAL WALL.
LAYER FIXED TO HIGH STRENGTH BLOCKS
WITH M10 x 100 NYLON FRAME FIXINGS OR
THREADED MASONRY SCREWS @ 440mm c/c.
THIS DRAWING IS NOT SITE SPECIFIC.
REFER TO RELEVANT DRAWINGS
RELATIVE TO THE PROJECT YOU ARE
WORKING ON.
READ IN CONJUNCTION WITH
DRAWING 4
M10
M10 Nylon frame fixings
x 100mm at 440mm c/c
for fixing soleplate to
concrete slab.
M8
M8 Nylon frame fixings
x 60mm at 440mm c/c
for fixing soleplate to
concrete slab.
90 NAILS
90mm x 3.1mm
collated smooth
galvanised nails used
to fix internal studs to
internal studs and
45mm bottom plates
to 45mm soleplates
at 600mm c/c.
SCREW 41
3.5mm x 35mm grey
phosphate at 150mm
c/c and 50mm in from
end.
20mm or 45mm x
120mm width
subject to width of
sips panel over
600mm wide
300mm wide
DPC
DPC
20mm or 45mm
x 95mm
GROUND FLOOR
SOLEPLATE DETAILS
IS
SU
E 8
2014
EM
11
0
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
M10
M10 Nylon frame fixings x 100mm at
440mm c/c for fixing 45mm soleplate to
concrete slab.
M8
M8 Nylon frame fixings x 60mm at
440mm c/c for fixing 20mm soleplate
to concrete slab.
PAS 90
90mm Paslode nails used to
fix internal studs to internal
studs and 45mm baserail to
soleplates at 600mm c/c.
THIS DRAWING IS NOT
SITE SPECIFIC. REFER TO
RELEVANT DRAWINGS
PERTAINING TO THE
PROJECT YOU ARE
WORKING ON.
20mm x SIP wall thickness or 95mm fixed with nylon
frame fixings M8 x 60mm at 440mm centres
45mm x 95mm base rail from panel is then located
centrally on soleplates and nailed with 65mmgalvanised nails at 600mm centres. Rebated panel is
seated over 45mm insert timber and screwed through
OSB from both faces horizontally into 45mm insert
timber with 3.5mm x 35mm screws at 150mm centres
FIXING OF SOLEPLATESHOLDING DOWN STRAPS
EXTERNAL WALL
UPSTAND
7N/mm2 Dense Concrete
Blocks, Density 1950kg/m3
x width of panel over, on
15mm Mortar bedding
forming upstand. Concrete
upstand can also be used
with a GEN1 mix.
GROUND LEVEL
MIN
.150
D.P.C.
F.F.L.
D.P.C.
CONCRETE SLAB
DPM
INSULATION
SCREED/FLOORING
D.P.C.
DPM
INSULATION
F.F.L.
SCREED/FLOORING
INTERNAL
PARTITION
D.P.C.
CONCRETE SLAB
TREATED
SOLEPLATE
INTERNAL UPSTAND
7N/mm2 Dense Concrete
Blocks, Density 1950kg/m3
x width of panel over, on
15mm Mortar bedding
forming upstand. Concrete
upstand can also be used
with a GEN1 mix.'
Austenitic stainless steel holding down
straps attached to SIP panels by 6 no.
3.35mm x 50mm stainless steel annular ring
shank nails at corners, sides of openings and
at 1200mm max. c/c and set into lean mix
concrete where possible. Where practical,
straps to be fixed to studs. Similar approved
by supplier may be used.
SCREW 41
3.5mm x 35mm grey
phosphate at 150mm c/c and
50mm in from end.
SOLEPLATE FIXINGS
IS
SU
E 8
2014
EM
11
1
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
GROUND LEVEL
U/S OF SOLEPLATE MUST
BE LEVEL WITH F.F.L.
FFL
FLO
OR
B
UILD
U
P B
Y O
TH
ER
S
DPM LAPPED
UNDER DPC
DPC
DENSE
7N
MIN
.150
EXTERNAL SKIN SHOWN
INDICATIVE. DETAILED
AND SUPPLIED BY OTHERS.
FISCHER FBS 6 CONCRETE
SCREW OR EQUAL AND
APPROVED TO GIVE SAFE
WORKING UPLIFT FORCE
75mm x 75mm x 10mm
SQUARE WASHER -
WASHER MUST BE TIGHT
AGAINST VERTICAL FACE
OF STRAP
BLOCK
SIP WALL PANEL ON
20mm SOLE PLATE.
INTERNAL
RESTRAINT STRAP
IS
SU
E 8
2014
EM
11
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
XW1912
XW1930 XW1960
SCREW 150
150 HeadLok screws
used for fixing SIP
wall panels to SIP wall
panels at 400mm c/c
and 100mm in from
end.
23
10
Splines are a smaller form of SIP
panels. They are nominally 99mm
wide x (subject to wall thickness) and
positioned as shown to join SIP
panels to each other.
ROOF PANELS ARE
JOINED IN A SIMILAR
FASHION. SPLINE IS
LIKELY TO BE SOLID
TIMBER. REFER TO SITE
SPECIFIC DRAWINGS.
SCREW 41
3.5mm x 35mm grey
phosphate at 150mm c/c
and 50mm in from end.
STOCK
EXTERNAL PANELS
IS
SU
E 8
2014
EM
21
0
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
SIP PANEL
SPLINES AND RAILS FITTED INTO 45mm DEEP REBATES AROUND EDGE
OF PANELS AND SCREWED AT 150mm c/c.
SIP PANEL
TOP PLATE
BOTTOM PLATE
GLIDEVALE PROTECT TF200 THERMAL REFLECTIVE BREATHER MEMBRANE IS FITTED TO ALL
WALLS AND RUBEROID - PRO BREATHER MEMBRANE TO ROOFS ON COMPLETION OF THE
FRAME ERECTION. IT SHOULD BE FITTED STRICTLY IN ACCORDANCE WITH MANUFACTURER'S
INSTRUCTIONS. BELOW IS A BRIEF INSTALLATION GUIDE.
THE GLIDEVALE MEMBRANE SHOULD BE FITTED WITH THE SILVER SIDE FACING OUT AND IN
SUCH A WAY AS TO SHED WATER AWAY FROM THE SHEATHING AND BELOW THE LOWEST
TIMBER. UPPER LAYERS SHOULD BE LAPPED HORIZONTALLY OVER LOWER LAYERS BY AT
LEAST 100mm AND STAGGERED. THE SHEETS SHOULD BE LAPPED AT LEAST 150mm
VERTICALLY. NAILS SHOULD BE GALVANISED, SHERADIZED OR AUSTENITIC STAINLESS STEEL,
PHOSPHOR BRONZE OR SILICON BRONZE AND STAPLES SHOULD BE OF AUSTENITIC
STAINLESS STEEL. TO PREVENT DAMAGE BY WIND, FIXINGS SHOULD BE AT REGULAR
INTERVALS OF NOT MORE THAN 500mm c/c. IT IS ESSENTIAL THAT THE LOWEST TIMBERS IN
THE WALL ARE PROTECTED BY THE BREATHABLE MEMBRANE.
IF GAPS ARE EVIDENT IN ROOF PANELS THESE SHOULD BE FILLED WITH INTUMESCENT FOAM
PROVIDED.
FIXING PROCEDURE
SHOULD LAPS BE NECESSARY
UPPER LAYERS SHOULD BE
LAPPED HORIZONTALLY OVER
LOWER LAYERS BY AT LEAST
100mm AND STAGGERED. THE
SHEETS SHOULD BE LAPPED AT
LEAST 150mm VERTICALLY.
SIP PANEL SIP PANELSPLINE
SCREW 41
3.5mm x 35mm grey
phosphate at 150mm c/c and
50mm in from end.
SIP TO SIP
PANEL FIXING
IS
SU
E 8
2014
EM
21
1
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
4
5
45mm x EPS WIDTH x 2 TIMBER
SPLINES JOINING 2 PANELS
TOGETHER. FIXED AS SHOWN
BELOW.
50
8.0 x 80mm WASHERHEAD SCREW
SIMPSON STRONG TIE CODE ESCR8.0x80
OR 6.0mm x 95mm HEADLOK @ 600mm c/c
(BOTH SIDES - STAGGERED).
3.1mm x 90mm SMOOTH GALVANISED
NAILS AT 300mm c/c (ONE SIDE).
50
C
L
3
0
0
3
0
0
6
0
0
6
0
0
TIMBER SPLINES PROJECT
BEYOND PANEL AND CUT PLUMB
ON SITE BY OTHERS TO FORM
EAVES OVERHANG
35mm x 3.5mm grey phosphate at
150mm c/c and 50mm in from end.
3
0
0
3
0
0
3
0
0
3
0
0
3
0
0
3
0
0
6
0
0
THIS DETAIL IS USED IF 90mm SPLINES ARE NOT PROVIDED.
IS
SU
E 8
2014
EM
21
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
SIP TO SIP
ROOF PANEL FIXING
-
BOTTOM RAIL
TOP RAIL
SIP
PANELS
ELEVATION
LINTEL
ELEVATION
PLAN ON LINTEL
NOTE: COMPONENTS
WILL BE DELIVERED TO
SITE + TIED TOGETHER,
FOR ASSEMBLY ON
SITE.
SCREW 41
3.5mm x 35mm grey
phosphate at 150mm c/c
and 50mm in from end.
TYPICAL WINDOW
COMPONENTS
AND ASSEMBLY
IS
SU
E 8
2014
EM
21
3
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
BOTTOM RAIL
TOP RAIL
ELEVATION
1020
SIP
PANELS
LINTEL
SCREW 35
35MM X 3.5MM WOODSCREWS FOR
FIXING PANELS TO SPLINES AND
TOP AND BOTTOM PLATES AT
150MM C/C AND 50MM IN FROM
END.
ELEVATION
PLAN
THE INNER TIMBER ON BOTH SIDES
IS TO BE LEFT ON SITE AND NOT
FIXED. THIS IS FOR CLIENT'S USE IF
TIMBER DOOR FRAMES ARE USED.
THEY ARE OMITTED IF uPVC DOOR
FRAME IS USED. THEY ARE NOT
SUPPLIED FOR OTHER DOORS.
NOTE: COMPONENTS
WILL BE DELIVERED
TO SITE + TIED
TOGETHER, FOR
ASSEMBLY ON SITE.
SCREW 41
3.5mm x 35mm grey phosphate at
150mm c/c and 50mm in from end.
TYPICAL EXTERNAL SINGLE
DOOR COMPONENTS
AND ARRANGEMENT
IS
SU
E 8
2014
EM
21
4
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
BRICKWORK
EXTERNAL CORNER
SIP PANEL
BRICKWORK
T JUNCTION -
SIP PANEL
INTERNAL
PARTITION
SIP / INTERNAL PARTITION
SCREW 150
150 HeadLok screws used for fixing SIP wall
panels to SIP wall panels at 400MM c/c and
100mm in from end.
OR
Simpson Strong Tie washer head screw
Code: ESCR8.0x160
EXTERNAL WALL
DETAILS
IS
SU
E 8
2014
EM
21
5
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
The tongued-and-groove flooring panels should be laid on top of the joists with the longest edges at right angles. Short end joints
should be staggered by approximately half a board in a brick bond pattern with these ends falling on the centre line of the joist. If
they overhang, additional timber supports or noggings should be provided. Although long edges need no intermediate support
between joists, support noggings should be fixed at floor perimeters where unsupported edges abut a wall.
Laying should start with a single row of panels parallel to the longest wall allowing for a suitably-sized expansion gap (minimum
12 mm) between the wall and edge of the panel. The second row should start with a half panel ensuring the brick bond pattern.
A liberal application of Adhesive should be made to the groove and shoulder of the tongue of the profile joint to the edges of
each panel to ensure that the entire joint is bonded, once the panels are butted tightly together. Any extruded residues should be
left until dry and removed by brushing/scraping.
Panels should be fixed to the joists and noggings using screws shown above or 10 gauge annular ring-shank nails of length 2.5
times the thickness of the panel. Nails should be spaced 25mm from each long edge with two more equidistant, between. Nails
and screws should be hammered flush with the surface of the panel. Where nailing could damage ceilings or joists, panels
should be fixed using countersunk screws in pre-drilled holes.
Sealing
All perimeter and exposed edges of the boards should be sealed by coating by brush with the Adhesive. Nail and screw heads
may be protected by applying a thin covering of the Adhesive.
A liberal bead of Adhesive (minimum 5mm diameter) should be made to the top of the joists. The boards should be positioned
and mechanically-fixed to alternate joists. The tongue-and-groove joints should be bonded using Adhesive.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c.
IF FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
Class D4 adhesive glue is supplied to fix the flooring to the
joists and the same glue to apply to the joints so that it foams
up and deems it watertight for a limited period.
Glue is supplied to fix boards to joists
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c for
fixing flooring to joists all
around the perimeter.
DECK INSTALLATION
IS
SU
E 8
2014
EM
31
0
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
1ST FLOOR JOIST
PAS 90
90mm Paslode nails
used to fix SIP panel
base rail to floor
deck at 600mm c/c.
PAS 51
51mm Paslode nails
used to fix internal
soleplates to floor
deck at 600mm c/c.
FIRST FLOOR SIP
PANELS SIT ONTO
FLOORING
PAS 90 @ 300mm c/c
INTO RIM BEAM
35 SCREWS
AT 150mm c/c
SCREW 41
3.5mm x 35mm grey
phosphate at 150mm c/c
and 50mm in from end.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c for
fixing flooring to joists all
around the perimeter.
1ST FLOOR NON LOAD BEARING
INT PANELS SIT ONTO 20mm x
95mm PLATE ON FLOORING
1ST FLOOR LOAD BEARING INT
PANELS SIT ONTO 20mm x 95mm
PLATE ON FLOORING
90mm nails at 600mm centres
51mm nails at 600mm centres
Double joist
Headbinders nailed to panels at 300mm centres
Double joist or nogging nailed to headbinder at 600mm centres
95mm x 38mm min
noggin at 600mm
centresFLOOR ZONE
FIRST FLOOR
SOLEPLATE DETAIL
IS
SU
E 8
2014
EM
31
1
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix rimboards
to joists and joists to
plate
Fix Kerto rimboard to each joist,
using one nail per flange. If double
rimboard is used fix one to the joists and
then fix second rim beam to former rim.
beam.
Kerto or joist can be used
as blocking.
Minimum bearing of 45mm.
38mm x 50mm Batten to give
additional bearing to
decking if required.
Load bearing wall.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
RIMBEAM
PERPENDICULAR
TO JOISTS
IS
SU
E 8
2014
EM
31
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
Refer to relevant details for party walls
Ensure header joist rimboard is tied to
floor zone by decking.
Where decking expansion gap is
required alternative support is required
C
B
A
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate
50mm x 50mm
plasterboard batten
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
RIMBEAM PARALLEL
TO JOISTS
IS
SU
E 8
2014
EM
31
3
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Kerto Q
closure panel
attached to ends
of joists.
Kerto blocking.
JOIST
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
90MM PASLODE NAILS JOIST TWICE
NAILED TO HEADBINDER RIMBOARD
TWICE NAILED TO JOIST END
RIMBOARD SKEW NAILED TO
HEADBINDER AT 300mm c/c
CANTILEVERED
JOISTS
IS
SU
E 8
2014
EM
31
4
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
Nail each side of joist.
Ensure at least 40mm from
end to avoid splitting.
45mm RIMBOARD
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Weyroc flooring - flooring system adhesive glue is supplied to
fix the flooring to the joists and the same glue to apply to the
joints so that it foams up and deems it watertight for a limited
period.
Caberboard flooring- PU glue is supplied to fix boards to joists
& the tape supplied must be applied across the joints after
glueing the joints with PVA glue.
22mm CHIPBOARD
JOIST
HEADBINDER
SCREW 51
3.9mm x 65mm grey phosphate
at 300mm c/c for fixing flooring to
joists all around the perimeter.
90MM PASLODE NAILS JOIST TWICE
NAILED TO HEADBINDER RIMBOARD
TWICE NAILED TO JOIST END
RIMBOARD SKEW NAILED TO
HEADBINDER AT 300mm c/c
JOIST NAILING
DETAIL
IS
SU
E 8
2014
EM
31
5
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
FLOOR DECKING
JOIST
HEAD BINDER
TOP RAIL
BOTTOM RAIL
LOCATOR PLATE IF
SPECIFIED
NOGGING
NOGGING OR
BLOCKING
ACCORDING TO
CALCULATED
DEFLECTION
PAS 90
90mm Paslode nails
used to fix internal studs
to internal studs and
soleplates to soleplates
at 600mm c/c.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c and
studs to studs
JOIST PARALLEL TO
NON LOADBEARING WALL
IS
SU
E 8
2014
EM
31
6
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
HEAD BINDER
TOP RAIL
BOTTOM RAIL
LOCATOR PLATE IF
SPECIFIED
FLOOR DECKING
I-BEAM
SPAN
PAS 90
90mm Paslode nails
used to fix internal
studs to internal
studs and soleplates
to soleplates at
600mm c/c.
FLOOR JOISTS MAY HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c and
studs to studs
LOADBEARING WALL
TO FLOOR DETAIL
IS
SU
E 8
2014
EM
31
7
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Floor Decking
G1
Non Loadbearing wall.
Finnjoist detail reference
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
NON LOADBEARING WALL
PERPENDICULAR
TO JOISTS
IS
SU
E 8
2014
EM
31
8
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Face mount or
Top mounted hanger
Web stiffener if
required by hanger
G3
Face mount or
Top mounted
hanger
Kerto or I-Joist Trimmer
Kerto
Finnjoist detail reference
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
HIGH LOAD JOIST
TO JOIST CONNECTION
IS
SU
E 8
2014
EM
31
9
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
G6
Face mount or
Top mounted hanger
Install Backer Blocks tight to top
flange on both sides of
Finnjoist. Attach with 10 no. clenched
where possible. Backer Block
to be a minimum of 250mm
wide.
Finnjoist detail reference
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
I JOIST TO I JOIST
CONNECTION
IS
SU
E 8
2014
EM
32
0
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
TF1b Finnjoist detail reference
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Fix Kerto rimboard to each Finnjoist,
using one nail per flange. If double
rimboard is used fix one to the joists
and then fix second rim beam to
former rim beam.
Kerto or Finnjoist can be used
as blocking.
Minimum bearing of 45mm.
38mm x 50mm Batten to give
additional bearing to
decking if required.
Load bearing wall.
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
I JOIST DETAIL 1
IS
SU
E 8
2014
EM
32
1
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
Refer to relevant details for party walls.
Ensure header joist rimboard is tied to
floor zone by decking.
Where decking expansion gap is
required alternative support is required.
TF2a
C
B
A
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
50mm x 50mm
plasterboard batten
Finnjoist detail reference
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
Infill with mineral
wool insulation
before fitting joists.
I JOIST DETAIL 2
IS
SU
E 8
2014
EM
32
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Web stiffener or
side reinforcement
may be required
on each side of
Finnjoist.
TF3
Kerto Q
closure panel
attached to ends
of joists.
Finnjoist or
Kerto blocking.
Finnjoist detail reference
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
I JOIST DETAIL 3
IS
SU
E 8
2014
EM
32
3
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
Nail each side of joist.
Ensure at least 40mm from
end to avoid splitting.
45mm RIMBOARD
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Weyroc flooring - flooring system adhesive glue is supplied to
fix the flooring to the joists and the same glue to apply to the
joints so that it foams up and deems it watertight for a limited
period.
Caberboard flooring- PU glue is supplied to fix boards to joists
& the tape supplied must be applied across the joints after
glueing the joints with PVA glue.
22mm CHIPBOARD
JOIST
HEADBINDER
SCREW 51
3.9mm x 65mm grey phosphate
at 300mm c/c for fixing flooring to
joists all around the perimeter.
90mm PASLODE NAILS JOIST TWICE NAILED
TO HEADBINDER RIMBOARD TWICE NAILED
TO JOIST END RIMBOARD SKEW NAILED TO
HEADBINDER AT 300mm c/c.
I JOIST DETAIL 4
IS
SU
E 8
2014
EM
32
4
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
NAIL 30
Floor Decking.
G1
Non Loadbearing wall.
Finnjoist detail reference
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
I JOIST DETAIL 5
IS
SU
E 8
2014
EM
32
5
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Face mount or
Top mounted hanger
Web stiffener if
required by hanger
G3
Face mount or
Top mounted
hanger
Kerto or I-Joist Trimmer
Kerto
Finnjoist detail reference
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
SCREW 51
3.9mm x 65mm grey
phosphate at 300mm c/c
for fixing flooring to joists
all around the perimeter.
I JOIST DETAIL 6
IS
SU
E 8
2014
EM
32
6
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix
rimboards to joists
and joists to plate.
Finnjoist detail reference
FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL
POSITIONED SO THAT HOLES LINE THROUGH.
Face fix hanger fitted with
web stiffeners and fully
nailed to improve
uplift capacity if required
in heavy duty loading
G4
Kerto or I-Joist Trimmer
SCREW 51
3.9 x 65mm grey
phosphate at 300c/c for
fixing flooring to joists all
around the perimeter.
I JOIST DETAIL 7
IS
SU
E 8
2014
EM
32
7
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
ENSURE FRAME IS SET OUT TO PROVIDE A MINIMUM 50mm CAVITY
BETWEEN PLY FACES.
THIS DETAIL SHOWS TIMBER FRAME ERECTION ONLY. REFER TO
ROBUST DETAILS MANUAL FOR SOUND RESISTANCE DETAILS.
PAS 90
90mm Paslode nails used
to fix internal studs to
internal studs and
soleplates to soleplates
at 600mm c/c.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c.
JOIST HANGER
Class D4 adhesive glue is supplied to fix the flooring to the
PARTY WALL AT
FLOOR JUNCTION
IS
SU
E 8
2014
EM
32
8
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
JO
IS
TS
FL
OO
RIN
G
PERPENDICULAR
DETAIL A
PAS 90
90mm Paslode nails used to
fix rimboards to joists and
joists to plate.
SCREW 51
3.9mm x 65mm grey phosphate at
300mm c/c for fixing flooring to joists
all around the perimeter.
METAL WEB JOISTS
PERPENDICULAR 1
IS
SU
E 8
2014
EM
32
9
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PERPENDICULAR
DETAIL B
JO
IS
TS
FL
OO
RIN
G
PAS 90
90mm Paslode nails used to
fix rimboards to joists and
joists to plate.
SCREW 51
3.9mm x 65mm grey phosphate at
300mm c/c for fixing flooring to joists
all around the perimeter.
METAL WEB JOISTS
PERPENDICULAR 2
IS
SU
E 8
2014
EM
33
0
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PERPENDICULAR
DETAIL C
JO
IS
TS
FL
OO
RIN
G
PAS 90
90mm Paslode nails used to
fix rimboards to joists and
joists to plate.
SCREW 51
3.9mm x 65mm grey phosphate at
300mm c/c for fixing flooring to joists
all around the perimeter.
METAL WEB JOISTS
PERPENDICULAR 3
IS
SU
E 8
2014
EM
33
1
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PARALLEL
DETAIL A
JO
IS
TS
FL
OO
RIN
G
PAS 90
90mm Paslode nails used to
fix rimboards to joists and
joists to plate.
SCREW 51
3.9mm x 65mm grey phosphate at
300mm c/c for fixing flooring to joists
all around the perimeter.
METAL WEB JOISTS
PARALLEL TO RIM 1
IS
SU
E 8
2014
EM
33
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PARALLEL
DETAIL B
JO
IS
TS
FL
OO
RIN
G
PAS 90
90mm Paslode nails used to
fix rimboards to joists and
joists to plate.
SCREW 51
3.9mm x 65mm grey phosphate at
300mm c/c for fixing flooring to joists
all around the perimeter.
METAL WEB JOISTS
PARALLEL TO RIM 2
IS
SU
E 8
2014
EM
33
3
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
TF1912
TF1960 TF1930
NOTE: WHEN REFERRING
TO THE LAYOUT PLAN FOR
INSTALLATION - INTERNAL
PANELS HAVE BEEN
VIEWED FROM BELOW AND
RIGHT HAND SIDE.
PAS 90
90mm Paslode nails
used to fix internal
studs to internal
studs and soleplates
to soleplates at
600mm c/c.
PAS 51
51mm Paslode
nails used to fix top
plates to top rails
at 600mm c/c and
studs to studs.
STOCK INTERNAL
PANELS SHEET 1
IS
SU
E 8
2014
EM
41
0
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
TFD905 TFD830
TFD1235
NOTE: WHEN
REFERRING TO THE
LAYOUT PLAN FOR
INSTALLATION -
INTERNAL PANELS
HAVE BEEN VIEWED
FROM BELOW AND
RIGHT HAND SIDE.
PAS 90
90mm Paslode nails
used to fix internal studs
to internal studs and
soleplates to soleplates
at 600mm c/c.
PAS 51
51mm Paslode nails
used to fix top plates
to top rails at 600mm
c/c and studs to studs.
2 PLY 195 x 45mm
2 PLY 195 x 45mm2 PLY 195 x 45mm
STOCK INTERNAL
PANELS SHEET 2
IS
SU
E 8
2014
EM
41
1
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
used to fix internal studs
to internal studs and
soleplates to soleplates
at 600mm c/c.
PAS 90
90mm Paslode nails
used to fix internal
studs to internal
studs and soleplates
to soleplates at
600mm c/c.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c and
studs to studs
FOR SITE SPECIFIC NAIL FIXING SCHEDULE REFER TO STRUCTURAL CALCULATIONS
OR PANEL DRAWINGS.
INTERNAL PANEL
TO PANEL
IS
SU
E 8
2014
EM
41
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
STUD
PLASTERBOARD
NOGGINGS
WALL TO WALL JUNCTION
STUD CLUSTER
STUD
4 WALL JUNCTION
SPLINES AND RAILS FITTED INTO 45mm DEEP REBATES AROUND EDGE
PAS 90
90mm Paslode nails
used to fix internal studs
to internal studs and
soleplates to soleplates
at 600mm c/c.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c and
studs to studs.
SCREW 95
95 HeadLok screws
used for fixing stud
clusters together at
600mm c/c
OR
Simpson
Strong Tie
washer head screw
Code: ESCR8.0x80
INTERNAL WALL
JUNCTIONS
IS
SU
E 8
2014
EM
41
3
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
BRICKWORK
SIP PANEL
PARTY WALL
MIN. 50 CAVITY
TO BE MAINTAINED.
MIN. 50
PAS 51
Class D4 adhesive glue is supplied to fix the flooring to the
INTERNAL PARTY WALL
TO EXTERNAL JUNCTION
IS
SU
E 8
2014
EM
41
4
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails.
PAS 51
51mm Paslode nails
at 600mm c/c used
to fix plasterboard
wedges.
SCREW 250
250mm x 6mm HeadLok screws
used for fixing roof panels to
wall panels. Fixed at 400mm c/c
and 100mm in from end.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x260.
ROOF PANEL FIXED
DOWN WITH HEADLOK
SCREW 250 AT 400mm c/c.
ROOF PANEL FIXING
IS
SU
E 8
2014
EM
51
0
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c.
TYPICAL EAVES
(ATTIC ROOM)
TYPICAL EAVES
(NO CEILING)
IF PARTITION IS FITTED WITH
FRAME BY ERECTORS A
400mm STRIP OF VCL MUST
BE FITTED BEFORE THE
PARTITION IS CONNECTED.
SCREW 250
250mm x 6 HeadLok screws used
for fixing roof panels to wall panels.
Fixed at 400mm c/c and 100mm in
from end.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x260
ROOF PANEL FIXED DOWN
WITH HEADLOK SCREW 250 AT
400mm c/c.
20mm HEADBINDER FIXED HEADLOK
SCREWS 100 AT 400mm c/c.
SIP WALL
TIMBER WEDGE FIXED WITH
HEADLOK SCREWS 100 AT 400mm c/c.
ROOF PANEL FIXED DOWN WITH
HEADLOK SCREW 250 AT 400mm c/c.
ROOF PANEL FIXED DOWN WITH
HEADLOK SCREW 250 AT 400mm c/c.
TIMBER WEDGE FIXED WITH
HEADLOK SCREWS 100 AT 400mm c/c.
TIMBER WEDGE FIXED WITH
HEADLOK SCREWS 100 AT 400mm c/c.
20mm x 95mm HEADBINDER FIXED
HEADLOK SCREWS 100 AT 400mm c/c.
45mm x 95mm PARTITION.
EAVES DETAILS
IS
SU
E 8
2014
EM
51
1
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
FIXING OF RIDGE BEAM & LOOSE CEILING
ALL HOLES FILLED WITH SQUARE TWIST NAILS
TWISTNAIL 35
35mm x 4mm Square
twist nails are used to
fix joist hangers or
truss clips. All holes to
be filled.
RIDGE DETAIL- 45 DEG ROOF PITCH
TIMBER WEDGE SECURED WITH HEADLOK
SCREW 250 AT 400mm c/c
ROOF PANEL FIXED DOWN WITH HEADLOK
SCREW 250 AT 400mm c/c.
RIDGE BEAM FIXED CENTRALLY
WITH HEADLOK SCREWS 150 AT
600mm c/c FIXED FROM
ALTERNATE SIDES.
TIMBER WEDGE FIXED WITH
HEADLOK SCREW 100 AT 400mm c/c
TIMBER WEDGE FIXED WITH HEADLOK
SCREW 250 AT 400mm c/c ALTERNATELY
AND IN PAIRS AT EACH BUTT JOINT.
SCREW 250
250mm x 6 HeadLok screws used
for fixing roof panels to wall
panels. Fixed at 400mm c/c and
100mm in from end.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x260
SCREW 95
95mm HeadLok screws used
for fixing roof timber 2 ply
splines together at 600mm c/c.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x80
SCREW 150
150mm HeadLok screws used
for fixing SIP wall panels to SIP
wall panels at 400mm c/c and
100mm in from end.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x160
45mm x 120mm CEILING JOISTS ON MIDI HANGERS ONTO WEDGE.
ROOF PANEL FIXED DOWN WITH
HEADLOK SCREW 250 AT 400mm c/c.
ROOF PANEL FIXED DOWN WITH
HEADLOK SCREW 100 AT 400mm c/c.
RIDGE BEAM FIXED CENTRALLY WITH
HEADLOK SCREWS 150 AT 600mm c/c
FIXED FROM ALTERNATE SIDES
RIDGE DETAILS
IS
SU
E 8
2014
EM
51
2
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
NAIL 30
30 x 3.75 square
twisted sheradised
nails to every hole for
fixing anchor or truss
clip to truss
Wallplate
SIP wall panel
SIP wall panel
TC Cullen truss clip.
2 per connection.
TA1/HTA1 framing anchor
2 per connection.
FIXING MULTIPLE TRUSSES
TO WALLPLATES
FIXING SINGLE PLY TRUSSES
TO WALLPLATES
Ensure cripple studs
are positioned under
multiple trusses at
least the width of
the girder or multiple
truss where required
Single trusses are checked for
bearing under point load
formula 9.2 of the certificate.
Therefore cripple studs may be
required under single trusses.
Refer to site specific panel
drawings.
TRUSS FIXING DETAILS
IS
SU
E 8
2014
EM
51
3
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
SIP - ROOF
VERGE DETAIL
TO SUIT
TO SUIT
HEADLOK SCREWS
GABLE LADDER
RO
OF
T
RU
SS
DETAIL AT SPANDREL PANELS
PAS 90
90mm Paslode nails.
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c.
TWISTNAIL 35
35mm x 4mm Square
twist nails are used to
fix joist hangers or
truss clips. All holes to
be filled.
GABLE LADDER FIXED USING PAS90
NAILS TO TRUSS AND SPANDREL
TOP PLATE @ 300mm c/c.
SCREW 250
250mm x 6 HeadLok screws
used for fixing roof panels to
wall panels. Fixed at 400mm
c/c and 100mm in from end.
OR
Simpson Strong
Tie
washer head screw
Code: ESCR8.0x260
45mm x 95mm LADDER.
25mm x 100mm TRUSS
STABILITY BRACES TWICE
NAILED TO RUNNER &
EACH TRUSS.
45mm x 95mm RUNNER
SCREWED TO SIP KIT AT
300mm c/c.
45mm x 95mm NOGGINS AT
600mm c/c. NAILED TO TRUSS &
TIMBER RUNNER.
ROOF DETAILS 1
SPANDREL AND VERGE
IS
SU
E 8
2014
EM
51
4
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
-
PAS 90
90mm Paslode nails
PAS 51
51mm Paslode nails
used to fix top
plates to top rails at
600mm c/c.
FIXING OF RIDGE BEAM TO INTERNAL PARTITIONS
3 No. PAS90 NAILS FROM EACH
SIDE.
TYPICAL EAVES
(LOW EAVES FOR ATTIC STORAGE ROOM)
DOUBLE JOIST
PAS 51 NAILS AT 600mm c/c TO FIX
HEADBINDER.
SCREW 250
250mm x 6 HeadLok screws used
for fixing roof panels to wall panels.
Fixed at 400mm c/c and 100mm in
from end.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x260
ROOF PANEL FIXED DOWN WITH
HEADLOK SCREW 250 AT 400mm c/c.
ROOF PANEL FIXED DOWN WITH
HEADLOK SCREW 250 AT 400mm c/c.
TIMBER WEDGE FIXED WITH
HEADLOK SCREWS 100 AT 400mm c/c.
PLASTERBOARD SUPPORT WEDGE
FIXED WITH PAS 51 NAILS AT 600mm c/c.
IS
SU
E 8
2014
EM
51
5
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
ROOF DETAILS 2
RIDGE AND EAVES
-
PAS 90
90mm Paslode nails.
PAS 51
51mm Paslode nails
at 600mm c/c used
to fix plasterboard
wedges.
SCREW 250
250mm x 6 HeadLok screws
used for fixing roof panels to
wall panels. Fixed at 400mm
c/c and 100mm in from end.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x260
CEILING TIES @ 400mm c/c
TIMBER WEDGES
FIXED USING
HEADLOK SCREWS
AT 400mm c/c.
ROOF PANELS FIXED DOWN TO
WEDGES WITH HEADLOK SCREWS
AT 400mm c/c.
SCREW 95
95mm HeadLok screws used
for fixing roof timber 2 ply
splines together at 600mm c/c.
OR
Simpson Strong Tie
washer head screw
Code: ESCR8.0x80
TIMBER PACKER
SIP ROOF PANEL
EAVES FILLET
IS
SU
E 8
2014
EM
51
6
This drawing is not site specific. Work to written dimensions only. DO NOT SCALE. If in doubt ask.
ROOF DETAILS 3
CEILING FIXING