Elliott Brochure 2015-2016 · 20 Horizontal MACHINING H.PLUS-300 H.PLUS-400 H.PLUS-405 H.PLUS-500...
5
www.elliottmachinery.com 19 V.PLUS-550 R.PLUS-550 V.PLUS-800 R.PLUS-800 V.PLUS-1000 VX-1000 VX-1500 860 x 400mm 33.85” x 15.74” 1,150 x 550mm 45.27” x 21.65” 1,150 x 550mm 45.27” x 21.65” 1,200 x 600mm 47.24” x 23.62” 1,700 x 700mm 66.92” x 27.55” 600 x 380mm 23.62” x 14.96” 860 x 530mm 33.85” x 20.86” 550mm 21.65" 800mm 31.49" 1,020mm 40.15" 1,020mm 40.15" 1,500mm 59.05" 410mm 16.14" 550mm 21.65" 550mm 21.65" 610mm 24.01" 700mm 27.55" 460mm 18.11" 500mm 19.68" 500mm 19.68" 610mm 24.01" 610mm 24.01" 15,000 rpm (10K / 20K) 12,000 rpm (20K / 30K) 12,000 rpm (20K / 30K) 15,000 rpm 15,000 rpm Big Plus 40 Big Plus 40 Big Plus 40 Big Plus 40 Big Plus 40 (Big Plus 50) 5.5/7.5kW (10HP) 18.5/22kW (30HP) 18.5/22kW (30HP) 15/22kW (30HP) 15/30kW (40HP) 30 ATC 30 ATC (40 / 80) 30 ATC (40 / 80) 30 ATC (48/60) 48 ATC (60), (30 ATC for #50) TABLE SIZE (V.PLUS) PALLET SIZE (R.PLUS) X-AXIS TRAVEL Y-AXIS TRAVEL Z-AXIS TRAVEL SPINDLE SPEED (OPT.) SPINDLE TAPER (OPT.)* SPINDLE MOTOR (HP) TOOL MAGAZINE CAPACITY (OPT.) V.PLUS & R.PLUS SERIES Vertical MACHINING The three ovals of the Matsuura Logo signify Man, Earth and Technology. Since 1935, Matsuura has been at the forefront of innovation design, development and manufacture of high quality machining centers. Our products satisfy the global requirement for high reliability, sustained accuracy and guaranteed performance. Matsuura produces a wide range of outstanding high speed machining centers covering all industry sectors. These include horizontals & verticals in all sizes configured with 3 to 5 axis, single table, twin and multi pallet systems, twin spindles and tool changers, cell systems and our superb range of ultra high-speed linear motor machines. If your business involves Aerospace, Automotive and Motorsport, Electronics, Telecommunications, Medical Research and Mold & Die, Matsuura has the solution for your needs. VX-1000 R.PLUS-800 (PALLET TYPE) * HSK Available
Transcript of Elliott Brochure 2015-2016 · 20 Horizontal MACHINING H.PLUS-300 H.PLUS-400 H.PLUS-405 H.PLUS-500...
www.elliottmachinery.com 19
V.PLUS-550R.PLUS-550
V.PLUS-800R.PLUS-800 V.PLUS-1000 VX-1000 VX-1500
860 x 400mm33.85” x 15.74”
1,150 x 550mm45.27” x 21.65”
1,150 x 550mm45.27” x 21.65”
1,200 x 600mm47.24” x 23.62”
1,700 x 700mm66.92” x 27.55”
600 x 380mm23.62” x 14.96”
860 x 530mm33.85” x 20.86”
550mm 21.65" 800mm 31.49" 1,020mm 40.15" 1,020mm 40.15" 1,500mm 59.05"
410mm 16.14" 550mm 21.65" 550mm 21.65" 610mm 24.01" 700mm 27.55"
460mm 18.11" 500mm 19.68" 500mm 19.68" 610mm 24.01" 610mm 24.01"
15,000 rpm (10K / 20K) 12,000 rpm (20K / 30K) 12,000 rpm (20K / 30K) 15,000 rpm 15,000 rpm
Big Plus 40 Big Plus 40 Big Plus 40 Big Plus 40 Big Plus 40 (Big Plus 50)
5.5/7.5kW (10HP) 18.5/22kW (30HP) 18.5/22kW (30HP) 15/22kW (30HP) 15/30kW (40HP)
30 ATC 30 ATC (40 / 80) 30 ATC (40 / 80) 30 ATC (48/60) 48 ATC (60), (30 ATC for #50)
TABLE SIZE (V.PLUS)
PALLET SIZE (R.PLUS)
X-AXIS TRAVEL
Y-AXIS TRAVEL
Z-AXIS TRAVEL
SPINDLE SPEED (OPT.)
SPINDLE TAPER (OPT.)*
SPINDLE MOTOR (HP)
TOOL MAGAZINE CAPACITY (OPT.)
V.PLUS & R.PLUS SERIES
Vertical MACHINING
The three ovals of the Matsuura Logo signify Man, Earth and Technology. Since 1935, Matsuurahas been at the forefront of innovation design, development and manufacture of high quality machining centers. Our products satisfy the global requirement for high reliability, sustained accuracy and guaranteed performance.
Matsuura produces a wide range of outstanding high speed machining centers covering all industry
sectors. These include horizontals & verticals in all sizes confi gured with 3 to 5 axis, single table, twin and multi pallet systems, twin spindles and tool changers, cell systems and our superb range of ultra high-speed linear motor machines.
If your business involves Aerospace, Automotive and Motorsport, Electronics, Telecommunications, Medical Research and Mold & Die, Matsuura has the solution for your needs.
VX-1000 R.PLUS-800(PALLET TYPE)
* HSK Available
20 www.elliottmachinery.com
Horizontal MACHINING
H.PLUS-300 H.PLUS-400 H.PLUS-405 H.PLUS-500 H.PLUS-630
300 x 300mm11.81" x 11.81"
400 x 400mm15.74" x 15.74"
500 x 500mm19.68" x 19.68"
500 x 500mm19.68" x 19.68"
630 x 630mm24.8" x 24.8"
Ø530 x H760mm(Ø20.86" x H29.92")
Ø630 x H900mm(Ø24.85" x H35.43")
Ø700 x H850mm (Ø27.55" x H33.46")
Ø850 x H1050mm (Ø33.46" x H41.33")
Ø1,050 x H1,115mm (Ø41.33" x H43.89")
500mm 19.68" 560mm 22.04" 660mm 25.98" 800mm 31.49" 1,050mm 41.33"
560mm 22.04" 640mm 25.19" 660mm 25.98" 800mm 31.49" 920mm 36.22"
500mm 19.68" 640mm 25.19" 660mm 25.98" 800mm 31.49" 990mm 38.97"
15,000 (20K /30K) 15,000 RPM 12,000 (20K /30K) 12,000 RPM 12,000 (10K /15K)
BIG PLUS 40 BIG PLUS 40 BIG PLUS 40 Big Plus 50 Big Plus 50
7.5/15 kW (20HP) 15/22 kW (30HP) 15 /22 kW (30HP) 15 /30 kW (40HP) 26 /30 kW (40HP)
60 ATC (120~320) 60 ATC (120~320) 60 ATC (120~320) 60 ATC (150~245) 60 ATC (150~240)
PALLET SIZE
MAXIMUM WORK PIECE
X-AXIS TRAVEL
Y-AXIS TRAVEL
Z-AXIS TRAVEL
SPINDLE SPEED (OPT.)
SPINDLE TAPER (OPT.) *
SPINDLE MOTOR (HP)
TOOL MAGAZINE CAPACITY (OPT.)
H-PLUS SERIES
H.PLUS-300
H.PLUS-405
H.PLUS-630
* HSK Available
www.elliottmachinery.com 21
MX-520 MX-850 MAM72-35V MAM72-63V MAM72-100H
630 x 560 x 510mm 24.8” x 22.0"x 20.0”
900 x 780 x 650mm35.4” x 30.7” x 25.6”
680 x 385 x 625mm26.8” x 15.1" x 24.6"
760 x 845 x 610mm29.9" x 33.2" x 24"
1,050 x 920 x 960mm41.3" x 36.2" x 37.8"
-125 ~ +10 / 360 deg. -125 ~ +30 / 360 deg. +65 ~ 106 / 360 deg. -110 ~ +10 / 360 deg. -120 ~ +30 / 360 deg.
500mm 19.6" dia. 700mm 27.6” dia. 130mm 5.1" dia. 500mm 19.6" squ. 630mm 24.8" squ.
Ø520 x H350mmØ20.47" x H13.7”
Ø760 x H450mmØ29.92” × H17.7”
Ø350 x H240mmØ13.7” x H9.44”
Ø720 x H450mm Ø28.3" x H17.7”
Ø1,000 x H770mmØ39.37” x H30.3” with restrictions
200 kg. 440 lbs. 500 kg. 1,100 lbs. 60 kg. 132 lbs. 400 kg. 880 lbs. 780 kg. 1,716 lbs.
40 m/min 1,575 ipm 40 m/min 1,575 ipm 60 m/min 2,362 ipm 60 m/min 2,362 ipm 60 m/min 2,362 ipm
7.5/11 kW (15HP) 26/30 kW (40HP) 7.5/11 kW (15HP) 15/20 kW (30HP) 26/30 kW (40HP)
12,000 (20K) rpm 15,000 (12K / 20K) rpm 12,000 (20K) rpm 12,000 (20K) rpm 12,000 (10K) rpm
Big Plus 40 Big Plus 40 Big Plus 40 Big Plus 40 (Big Plus 50) Big Plus 50
Trunion Trunion Trunion Trunion Trunion
60 ATC (90) 60 ATC (90) 60 ATC (120~520) 51 ATC (120~520) 60 ATC (150~240)
1 1 32 (40, 90, 180) 2 (1, 6, 18, Linear FMS) 2 (6, 10, Linear FMS)
TRAVELS X/Y/Z
A OR B / C AXIS
TABLE / PALLET SIZE
MAXIMUM WORKPIECE SIZE
LOAD ON TABLE
MAXIMUM RAPID FEEDS
SPINDLE MOTOR (MAX.)
SPINDLE SPEEDS (OPT.)
SPINDLE TAPER (OPT.) *
4TH/5TH AXIS SYSTEM
NUMBER OF TOOLS ATC (OPT.)
NUMBER OF PALLETS APC (OPT.)
5 AXIS SERIES
MACHINING5 AXIS
MX-520
MAM72-63V
MAM72-100H
MAM72-35V
* HSK Available
22 www.elliottmachinery.com
Technology Products
LX-160 LV-500
500 x 250 x 300mm 19.7" x 9.8" x 11.8"
-125 ~ +125 / 360 deg.
100mm 3.9" dia. 540 x 350 mm21.25 x 13.77”
Ø160 X H230mmØ6.3” X H9.1”
20 kg. 44 lbs. 100 kg. 220 lbs.
90 m/min 3,543 ipm
7.5/15 kW (20HP)
400 to 46,000 rpm
BT-30 (HSK-40)
8.7 Nm 6.4 ft. lbs.
Trunion N/A
10 (30 - 338)
1 (2, 42, 91) N/A
TRAVELS X/Y/Z
B / C AXIS
TABLE / PALLET SIZE
MAXIMUM WORKPIECE SIZE
LOAD ON TABLE
MAXIMUM RAPID FEEDS
SPINDLE MOTOR (MAX.)
SPINDLE SPEEDS RPM
SPINDLE TAPER (OPT.)
MAXIMUM TORQUE (OPT.)
4TH/5TH AXIS SYSTEM
NUMBER OF TOOLS ATC (OPT.)
NUMBER OF PALLETS APC (OPT.)
ULTRA HIGH SPEED, HIGH PRECISION, LINEAR MOTOR
MILL, TURN, GRINDCUBLEX CUBLEX-35 CUBLEX-63
570 x 410 x 525mm22.4" x 16.1" x 20.6"
760 x 845 x 660mm 29.9" x 33.2" x 25.98"
130mm 5.11" dia 500mm 19.6" squ.
Ø350 x H240mmØ13.7" x H9.4"
Ø630 x H450mm Ø24.8" x H17.7"
60 kg. 132 lbs. 350 kg. 770 lbs.
50 m/min 1,968 ipm 60 m/min 2,362 ipm
7.5/11 kW (15HP) 15/22 kW (30HP)
40 to 12,000 40 to 12,000
HSK-63 HSK-63
12.6/14.5 kW (20HP) 15/18 kW (25HP)
3,000 1,300
92 Nm 68 ft. lbs. 215 Nm 158 ft. lbs.
120 (up to 520) 51 (up to 320)
32 2 (6, 18, Linear FMS)
TRAVELS X/Y/Z
TABLE / PALLET SIZE
MAXIMUM WORKPIECE SIZE
LOAD ON TABLE
MAXIMUM RAPID FEEDS
SPINDLE MOTOR (MAX.)
SPINDLE SPEEDS RPM (OPT.)
SPINDLE TAPER
TABLE TURNING MOTOR (MAX.)
TABLE TURNING SPEEDS RPM
MAXIMUM TABLE TORQUE
NUMBER OF TOOLS ATC (OPT.)
NUMBER OF PALLETS APC (OPT.)
LX-160
www.elliottmachinery.com 23
Automation & Accessories
MACHINE MODEL
MACHINEPALLET SIZE
FLOOR PALLET SYSTEMS
TOWER PALLET SYSTEMS
MAM72-35V 130mm 5.11" 2 32/40/49
MAM72-63V 500mm 19.68" 6 18
MAM72-100H 630mm 24.80" 6 N/A
H.PLUS-300 300mm 11.81" 5 or 11 15
H.PLUS-400 400mm 15.74” 6 12
H.PLUS-405 500mm 19.68" 6 12
H.PLUS-500 500mm 19.68” 6 N/A
H.PLUS-630 630mm 24.80" 6 N/A
SPINDLE TAPER NUMBER OF TOOLS (MIN. MAX.)
No. 30 / HSK-40 128 to 338 tools
No. 40 / HSK-63 120 to 520 tools
No. 50 / HSK-100 150 to 240 tools
MULTI PALLET SYSTEMS
TOOL MATRIX SYSTEMS
![VFD-F Series - MEP USER MANUAL.pdf · [11.81] 330.0 [12.99] 688.3 [27.10] 275.0 [10.83] 370.0 [14.57] 715.8 [28.18] 300.0 [11.81] 420.0 [12.54] Unit: mm [inch] 02 - Comparison of](https://static.fdocuments.in/doc/165x107/604d47655cd63b31d17dbfdf/vfd-f-series-mep-user-1181-3300-1299-6883-2710-2750-1083-3700.jpg)
![SERVICE & OPERATING MANUAL · 13 .53 4x 1. 2. 13.50 [343] 11.81 [300] a suction port 1" fnpt suction port (optional) discharge port (optional) 1" fnpt discharge port 1" fnpt air inlet](https://static.fdocuments.in/doc/165x107/5d4efe9388c993790d8b514a/service-operating-manual-13-53-4x-1-2-1350-343-1181-300-a-suction.jpg)
![This drawing is the property of SACO Controls Inc ...sacocontrols.com/pdfs/CurvedPanel.pdf · 300.00 [11.81] welded and bolted piano hinge 96.00 [3.78] 18.00 [0.71] L C 8 x 18mm slotted](https://static.fdocuments.in/doc/165x107/5ecc16529ccf4717d1558c56/this-drawing-is-the-property-of-saco-controls-inc-30000-1181-welded-and.jpg)
![14.46 [367.30mm] 34.92 [887.01mm] 26.77 [680.00mm] 5.91 ... · Roll ±3° ilt +15 / -5 MAX:27.56" [700.00mm] MIN:11.81"[300.00MM] MAX：31.50" [800.00mm] MIN：15.75"[400.00MM] 26.48"](https://static.fdocuments.in/doc/165x107/60830f4b5c9f19005830f437/1446-36730mm-3492-88701mm-2677-68000mm-591-roll-3-ilt-15-.jpg)
