Elite Dentist | Dental Practice Management System in India
6
Meets their comfort needs. Finally, a low profile bracket that doctors and patients can agree on.
Transcript of Elite Dentist | Dental Practice Management System in India
Offs
et
3 Use this prefix to order APC™ II Adhesive Coated Appliance System.
Maxillary Torque Angulation In/Out mm (in.) D Offset L/R
In U.S. and Puerto Rico: 1-800-423-4588 • 626-574-4000In Canada: 1-800-443-1661Technical Helpline: 1-800-265-1943 • 626-574-4577CE Hotline: 1-800-852-1990 x 4649 • 626-574-4649Outside these areas, contact your local representative.
Meets their comfort needs.
Finally, a low profile bracket that doctors
and patients can agree on.
Meets your clinical needs.
Victory Series™
Low Profile Bracket
Central +17˚ 4˚ 0.66 (.026) L 3 024-775 3 024-875 5 024-775 5 024-875 R 3 024-776 3 024-876 5 024-776 5 024-876
Lateral +10˚ 8˚ 0.88 (.035) L 3 024-777 3 024-877 5 024-777 5 024-877 R 3 024-778 3 024-878 5 024-778 5 024-878
Cuspid -7˚ 8˚ 0.53 (.021) L 3 024-779 3 024-879 5 024-779 5 024-879 R 3 024-780 3 024-880 5 024-780 5 024-880 0˚ 8˚ L 3 024-369 3 024-469 5 024-369 5 024-469 R 3 024-370 3 024-470 5 024-370 5 024-470
Cuspid Hook -7˚ 8˚ 0.53 (.021) L 3 024-881 3 024-981 5 024-881 5 024-981 R 3 024-882 3 024-982 5 024-882 5 024-982 0˚ 8˚ L 3 024-773 3 024-873 5 024-773 5 024-873 R 3 024-774 3 024-874 5 024-774 5 024-874
Bicuspid -7˚ 0˚ 0.73 (.029) L/R 3 024-790 0 3 024-890 0 5 024-790 0 5 024-890 0
Bicuspid Hook -7˚ 0˚ 0.73 (.029) L 3 024-585 0 3 024-685 0 5 024-585 0 5 024-685 0 R 3 024-584 0 3 024-684 0 5 024-584 0 5 024-684 0
2nd Bicuspid -7˚ 0˚ 1.30 (.051) L/R 3 024-791 0 3 024-891 0 5 024-791 0 5 024-891 0
2nd Bicuspid Hook -7˚ 0˚ 1.30 (.051) L 3 024-813 0 3 024-913 0 5 024-813 0 5 024-913 0 R 3 024-812 0 3 024-912 0 5 024-812 0 5 024-912 0
Mandibular
Low Anterior -6˚ 0˚ 1.14 (.045) L/R 3 024-792 3 024-892 5 024-792 5 024-892
Cuspid -6˚ 3˚ 0.51 (.020) 2˚ L 3 024-7931 3 024-8931 5 024-7931 5 024-8931 R 3 024-7941 3 024-8941 5 024-7941 5 024-8941 0˚ 3˚ 2˚ L 3 024-3811 3 024-4811 5 024-3811 5 024-4811 R 3 024-3821 3 024-4821 5 024-3821 5 024-4821
Cuspid Hook -6˚ 3˚ 0.51 (.020) 2˚ L 3 024-8831 3 024-9831 5 024-8831 5 024-9831 R 3 024-8841 3 024-9841 5 024-8841 5 024-9841 0˚ 3˚ 2˚ L 3 024-7711 3 024-8711 5 024-7711 5 024-8711 R 3 024-7721 3 024-8721 5 024-7721 5 024-8721
1st Bicuspid -12˚ 2˚ 0.76 (.030) L 3 024-795 0 3 024-895 0 5 024-795 0 5 024-895 0 R 3 024-796 0 3 024-896 0 5 024-796 0 5 024-896 0
1st Bicuspid Hook -12˚ 2˚ 0.76 (.030) L 3 024-809 0 3 024-909 0 5 024-809 0 5 024-909 0 R 3 024-808 0 3 024-908 0 5 024-808 0 5 024-908 0
2nd Bicuspid -17˚ 2˚ 0.86 (.034) L 3 024-797 0 3 024-897 0 5 024-797 0 5 024-897 0 R 3 024-798 0 3 024-898 0 5 024-798 0 5 024-898 0
2nd Bicuspid Hook -17˚ 2˚ 0.86 (.034) L 3 024-811 0 3 024-911 0 5 024-811 0 5 024-911 0 R 3 024-810 0 3 024-910 0 5 024-810 0 5 024-910 0
© 2001-2008 3M. All rights reserved.016-928-3 0804
AlastiK, APC, MBT and Victory Series are trademarks of 3M.
APC™ PLUS Adhesive Coated Appliance System
.018 in. .022 in.APC™ II Adhesive Coated Appliance System
.018 in. .022 in.
Offs
et
5Use this prefix to order APC™ PLUS Adhesive Coated Appliance System with color change adhesive.
Offs
et
Offs
et
3 Use this prefix to order APC™ II Adhesive Coated Appliance System. 5
Use this prefix to order APC™ PLUS Adhesive Coated Appliance System with color change adhesive.
APC™ PLUS Adhesive Coated Appliance System
.018 in. .022 in.APC™ II Adhesive Coated Appliance System
.018 in. .022 in.One Patient Kits
U/L 5X5 1 Case Kit 3 024-100 3 024-120 5 024-100 5 024-120
U/L 5X5 Cuspid Hook 1 Case Kit 3 024-101 3 024-121 5 024-101 5 024-121
U/L 5X5 Hooks 1 Case Kit 3 024-102 3 024-122 5 024-102 5 024-122
U/L 5X5 Cuspid Hook 0º Torque Cuspid 1 Case Kit 3 024-104 3 024-124 5 024-104 5 024-124
U/L 5X5 Hooks 0º Torque Cuspid 1 Case Kit 3 024-105 3 024-125 5 024-105 5 024-125
WELDABLE BICUSPIDS: All Victory Series low profile bicuspid brackets are available as weldable bicuspid brackets. Add a "7" prefix before the 6-digit part number to indicate weldable.
33M UnitekOrthodontic Products2724 South Peck RoadMonrovia, CA 91016www.3MUnitek.com
Offs
et
3 Use this prefix to order APC™ II Adhesive Coated Appliance System.
Maxillary Torque Angulation In/Out mm (in.) D Offset L/R
In U.S. and Puerto Rico: 1-800-423-4588 • 626-574-4000In Canada: 1-800-443-1661Technical Helpline: 1-800-265-1943 • 626-574-4577CE Hotline: 1-800-852-1990 x 4649 • 626-574-4649Outside these areas, contact your local representative.
Meets their comfort needs.
Finally, a low profile bracket that doctors
and patients can agree on.
Meets your clinical needs.
Victory Series™
Low Profile Bracket
Central +17˚ 4˚ 0.66 (.026) L 3 024-775 3 024-875 5 024-775 5 024-875 R 3 024-776 3 024-876 5 024-776 5 024-876
Lateral +10˚ 8˚ 0.88 (.035) L 3 024-777 3 024-877 5 024-777 5 024-877 R 3 024-778 3 024-878 5 024-778 5 024-878
Cuspid -7˚ 8˚ 0.53 (.021) L 3 024-779 3 024-879 5 024-779 5 024-879 R 3 024-780 3 024-880 5 024-780 5 024-880 0˚ 8˚ L 3 024-369 3 024-469 5 024-369 5 024-469 R 3 024-370 3 024-470 5 024-370 5 024-470
Cuspid Hook -7˚ 8˚ 0.53 (.021) L 3 024-881 3 024-981 5 024-881 5 024-981 R 3 024-882 3 024-982 5 024-882 5 024-982 0˚ 8˚ L 3 024-773 3 024-873 5 024-773 5 024-873 R 3 024-774 3 024-874 5 024-774 5 024-874
Bicuspid -7˚ 0˚ 0.73 (.029) L/R 3 024-790 0 3 024-890 0 5 024-790 0 5 024-890 0
Bicuspid Hook -7˚ 0˚ 0.73 (.029) L 3 024-585 0 3 024-685 0 5 024-585 0 5 024-685 0 R 3 024-584 0 3 024-684 0 5 024-584 0 5 024-684 0
2nd Bicuspid -7˚ 0˚ 1.30 (.051) L/R 3 024-791 0 3 024-891 0 5 024-791 0 5 024-891 0
2nd Bicuspid Hook -7˚ 0˚ 1.30 (.051) L 3 024-813 0 3 024-913 0 5 024-813 0 5 024-913 0 R 3 024-812 0 3 024-912 0 5 024-812 0 5 024-912 0
Mandibular
Low Anterior -6˚ 0˚ 1.14 (.045) L/R 3 024-792 3 024-892 5 024-792 5 024-892
Cuspid -6˚ 3˚ 0.51 (.020) 2˚ L 3 024-7931 3 024-8931 5 024-7931 5 024-8931 R 3 024-7941 3 024-8941 5 024-7941 5 024-8941 0˚ 3˚ 2˚ L 3 024-3811 3 024-4811 5 024-3811 5 024-4811 R 3 024-3821 3 024-4821 5 024-3821 5 024-4821
Cuspid Hook -6˚ 3˚ 0.51 (.020) 2˚ L 3 024-8831 3 024-9831 5 024-8831 5 024-9831 R 3 024-8841 3 024-9841 5 024-8841 5 024-9841 0˚ 3˚ 2˚ L 3 024-7711 3 024-8711 5 024-7711 5 024-8711 R 3 024-7721 3 024-8721 5 024-7721 5 024-8721
1st Bicuspid -12˚ 2˚ 0.76 (.030) L 3 024-795 0 3 024-895 0 5 024-795 0 5 024-895 0 R 3 024-796 0 3 024-896 0 5 024-796 0 5 024-896 0
1st Bicuspid Hook -12˚ 2˚ 0.76 (.030) L 3 024-809 0 3 024-909 0 5 024-809 0 5 024-909 0 R 3 024-808 0 3 024-908 0 5 024-808 0 5 024-908 0
2nd Bicuspid -17˚ 2˚ 0.86 (.034) L 3 024-797 0 3 024-897 0 5 024-797 0 5 024-897 0 R 3 024-798 0 3 024-898 0 5 024-798 0 5 024-898 0
2nd Bicuspid Hook -17˚ 2˚ 0.86 (.034) L 3 024-811 0 3 024-911 0 5 024-811 0 5 024-911 0 R 3 024-810 0 3 024-910 0 5 024-810 0 5 024-910 0
© 2001-2008 3M. All rights reserved.016-928-3 0804
AlastiK, APC, MBT and Victory Series are trademarks of 3M.
APC™ PLUS Adhesive Coated Appliance System
.018 in. .022 in.APC™ II Adhesive Coated Appliance System
.018 in. .022 in.
Offs
et
5Use this prefix to order APC™ PLUS Adhesive Coated Appliance System with color change adhesive.
Offs
et
Offs
et
3 Use this prefix to order APC™ II Adhesive Coated Appliance System. 5
Use this prefix to order APC™ PLUS Adhesive Coated Appliance System with color change adhesive.
APC™ PLUS Adhesive Coated Appliance System
.018 in. .022 in.APC™ II Adhesive Coated Appliance System
.018 in. .022 in.One Patient Kits
U/L 5X5 1 Case Kit 3 024-100 3 024-120 5 024-100 5 024-120
U/L 5X5 Cuspid Hook 1 Case Kit 3 024-101 3 024-121 5 024-101 5 024-121
U/L 5X5 Hooks 1 Case Kit 3 024-102 3 024-122 5 024-102 5 024-122
U/L 5X5 Cuspid Hook 0º Torque Cuspid 1 Case Kit 3 024-104 3 024-124 5 024-104 5 024-124
U/L 5X5 Hooks 0º Torque Cuspid 1 Case Kit 3 024-105 3 024-125 5 024-105 5 024-125
WELDABLE BICUSPIDS: All Victory Series low profile bicuspid brackets are available as weldable bicuspid brackets. Add a "7" prefix before the 6-digit part number to indicate weldable.
33M UnitekOrthodontic Products2724 South Peck RoadMonrovia, CA 91016www.3MUnitek.com
Victory Series™
Low Profile Bracket Meets their comfort needs. Meets your clinical needs.
Profiles in victory: Comfort. Profiles in victory: Control.
The Victory Series™ Low Profile Bracket is a sure winner on
the patient satisfaction front. Unlike other conventional and
miniature brackets, they incorporate a low profile
approach that enhances both aesthetics
and patient comfort. They look better.
They feel better. And, because
of their lower profile, your
patients are more comfortable
wearing them.
In addition to their low profile,
the occlusal/gingival dimension has
also been reduced, enhancing patient
hygiene. This optimum sizing gives your patients a reason
to smile while they are in treatment.
If you’ve been searching for a true mini metal
bracket that’s uncompromising in ligation and
control, victory is now within your grasp. Our
leading-edge design delivers uncompromising
levels of control throughout the treatment process,
assuring consistent patient outcomes with the use of
the MBT™ System. The bracket’s remarkable
low profile greatly reduces occlusal interference.
The bracket also features a contoured micro-etched
base. Positioning is made easier and more accurate
because of their rhomboid shape that follows the
natural vertical line of the tooth.
Ample under tie-wing
area is integral to the design
so you do not have to sacrifice bracket size
for easy ligation. In fact, the tie-wing
under cuts are deep enough to accommodate
double ligation. You can enhance ease of ligation
further with our AlastiK™ Easy-To-Tie Ligatures.
Finally there’s a bracket that brings
together all the benefits of a low profile design
with the superior control and ease of ligation of a larger bracket.
Victory Series™ Low Profile Brackets from 3M Unitek —
today’s no-compromise solution.
Smooth radius surface for enhanced patient comfort.
Torque in Basefor level slot line-up.
Color-coded quadrantID system.
Micro-etch base surfaceand anatomical contouring.
Vertical scribe linefor more accurate
bracket placement.
Uncompromising under tie-wing area for ease of ligation.
A unique rhomboid design with a flatter, compounded radius accommodates naturally occurring variation in tooth surfaces. This design assures three point contact for increased tooth adaptation.
Compared to conventional size brackets, Victory Series Low Profile Brackets are less bulky.
They feel more comfortable and there is less occlusal interference.
These low profile brackets inspire confidence as part of
the time-tested Victory Series and MBT™ bracket solutions.
And they offer the proven time-savings of our APC™ Adhesive
Coated Appliance System.
It’s a simple equation. Greater comfort equals greater acceptance.
And, every aspect from face to base is designed for victory.
Victory Series™ Bracket Victory Series™ Low Profile Bracket
Mesial-distal dimension is not compromised even though the bracket has a low profile. You maintain the rotational
control you need to get the results you desire.
Victory Series™ Bracket Victory Series™ Low Profile Bracket
Victory Series™
Low Profile BracketEvery aspect from face to base is designed for victory.
Victory Series™
Low Profile Bracket Meets their comfort needs. Meets your clinical needs.
Profiles in victory: Comfort. Profiles in victory: Control.
The Victory Series™ Low Profile Bracket is a sure winner on
the patient satisfaction front. Unlike other conventional and
miniature brackets, they incorporate a low profile
approach that enhances both aesthetics
and patient comfort. They look better.
They feel better. And, because
of their lower profile, your
patients are more comfortable
wearing them.
In addition to their low profile,
the occlusal/gingival dimension has
also been reduced, enhancing patient
hygiene. This optimum sizing gives your patients a reason
to smile while they are in treatment.
If you’ve been searching for a true mini metal
bracket that’s uncompromising in ligation and
control, victory is now within your grasp. Our
leading-edge design delivers uncompromising
levels of control throughout the treatment process,
assuring consistent patient outcomes with the use of
the MBT™ System. The bracket’s remarkable
low profile greatly reduces occlusal interference.
The bracket also features a contoured micro-etched
base. Positioning is made easier and more accurate
because of their rhomboid shape that follows the
natural vertical line of the tooth.
Ample under tie-wing
area is integral to the design
so you do not have to sacrifice bracket size
for easy ligation. In fact, the tie-wing
under cuts are deep enough to accommodate
double ligation. You can enhance ease of ligation
further with our AlastiK™ Easy-To-Tie Ligatures.
Finally there’s a bracket that brings
together all the benefits of a low profile design
with the superior control and ease of ligation of a larger bracket.
Victory Series™ Low Profile Brackets from 3M Unitek —
today’s no-compromise solution.
Smooth radius surface for enhanced patient comfort.
Torque in Basefor level slot line-up.
Color-coded quadrantID system.
Micro-etch base surfaceand anatomical contouring.
Vertical scribe linefor more accurate
bracket placement.
Uncompromising under tie-wing area for ease of ligation.
A unique rhomboid design with a flatter, compounded radius accommodates naturally occurring variation in tooth surfaces. This design assures three point contact for increased tooth adaptation.
Compared to conventional size brackets, Victory Series Low Profile Brackets are less bulky.
They feel more comfortable and there is less occlusal interference.
These low profile brackets inspire confidence as part of
the time-tested Victory Series and MBT™ bracket solutions.
And, they offer the proven time-savings of our APC™ Adhesive
Coated Appliance System.
It’s a simple equation. Greater comfort equals greater acceptance.
And, every aspect from face to base is designed for victory.
Victory Series™ Bracket Victory Series™ Low Profile Bracket
Mesial-distal dimension is not compromised even though the bracket has a low profile. You maintain the rotational
control you need to get the results you desire.
Victory Series™ Bracket Victory Series™ Low Profile Bracket
Victory Series™
Low Profile BracketEvery aspect from face to base is designed for victory.
Victory Series™
Low Profile Bracket Meets their comfort needs. Meets your clinical needs.
Profiles in victory: Comfort. Profiles in victory: Control.
The Victory Series™ Low Profile Bracket is a sure winner on
the patient satisfaction front. Unlike other conventional and
miniature brackets, they incorporate a low profile
approach that enhances both aesthetics
and patient comfort. They look better.
They feel better. And, because
of their lower profile, your
patients are more comfortable
wearing them.
In addition to their low profile,
the occlusal/gingival dimension has
also been reduced, enhancing patient
hygiene. This optimum sizing gives your patients a reason
to smile while they are in treatment.
If you’ve been searching for a true mini metal
bracket that’s uncompromising in ligation and
control, victory is now within your grasp. Our
leading-edge design delivers uncompromising
levels of control throughout the treatment process,
assuring consistent patient outcomes with the use of
the MBT™ System. The bracket’s remarkable
low profile greatly reduces occlusal interference.
The bracket also features a contoured micro-etched
base. Positioning is made easier and more accurate
because of their rhomboid shape that follows the
natural vertical line of the tooth.
Ample under tie-wing
area is integral to the design
so you do not have to sacrifice bracket size
for easy ligation. In fact, the tie-wing
under cuts are deep enough to accommodate
double ligation. You can enhance ease of ligation
further with our AlastiK™ Easy-To-Tie Ligatures.
Finally there’s a bracket that brings
together all the benefits of a low profile design
with the superior control and ease of ligation of a larger bracket.
Victory Series™ Low Profile Brackets from 3M Unitek —
today’s no-compromise solution.
Smooth radius surface for enhanced patient comfort.
Torque in Basefor level slot line-up.
Color-coded quadrantID system.
Micro-etch base surfaceand anatomical contouring.
Vertical scribe linefor more accurate
bracket placement.
Uncompromising under tie-wing area for ease of ligation.
A unique rhomboid design with a flatter, compounded radius accommodates naturally occurring variation in tooth surfaces. This design assures three point contact for increased tooth adaptation.
Compared to conventional size brackets, Victory Series Low Profile Brackets are less bulky.
They feel more comfortable and there is less occlusal interference.
These low profile brackets inspire confidence as part of
the time-tested Victory Series and MBT™ bracket solutions.
And they offer the proven time-savings of our APC™ Adhesive
Coated Appliance System.
It’s a simple equation. Greater comfort equals greater acceptance.
And, every aspect from face to base is designed for victory.
Victory Series™ Bracket Victory Series™ Low Profile Bracket
Mesial-distal dimension is not compromised even though the bracket has a low profile. You maintain the rotational
control you need to get the results you desire.
Victory Series™ Bracket Victory Series™ Low Profile Bracket
Victory Series™
Low Profile BracketEvery aspect from face to base is designed for victory.
Offs
et
3 Use this prefix to order APC™ II Adhesive Coated Appliance System.
Maxillary Torque Angulation In/Out mm (in.) D Offset L/R
In U.S. and Puerto Rico: 1-800-423-4588 • 626-574-4000In Canada: 1-800-443-1661Technical Helpline: 1-800-265-1943 • 626-574-4577CE Hotline: 1-800-852-1990 x 4649 • 626-574-4649Outside these areas, contact your local representative.
Meets their comfort needs.
Finally, a low profile bracket that doctors
and patients can agree on.
Meets your clinical needs.
Victory Series™
Low Profile Bracket
Central +17˚ 4˚ 0.66 (.026) L 3 024-775 3 024-875 5 024-775 5 024-875 R 3 024-776 3 024-876 5 024-776 5 024-876
Lateral +10˚ 8˚ 0.88 (.035) L 3 024-777 3 024-877 5 024-777 5 024-877 R 3 024-778 3 024-878 5 024-778 5 024-878
Cuspid -7˚ 8˚ 0.53 (.021) L 3 024-779 3 024-879 5 024-779 5 024-879 R 3 024-780 3 024-880 5 024-780 5 024-880 0˚ 8˚ L 3 024-369 3 024-469 5 024-369 5 024-469 R 3 024-370 3 024-470 5 024-370 5 024-470
Cuspid Hook -7˚ 8˚ 0.53 (.021) L 3 024-881 3 024-981 5 024-881 5 024-981 R 3 024-882 3 024-982 5 024-882 5 024-982 0˚ 8˚ L 3 024-773 3 024-873 5 024-773 5 024-873 R 3 024-774 3 024-874 5 024-774 5 024-874
Bicuspid -7˚ 0˚ 0.73 (.029) L/R 3 024-790 0 3 024-890 0 5 024-790 0 5 024-890 0
Bicuspid Hook -7˚ 0˚ 0.73 (.029) L 3 024-585 0 3 024-685 0 5 024-585 0 5 024-685 0 R 3 024-584 0 3 024-684 0 5 024-584 0 5 024-684 0
2nd Bicuspid -7˚ 0˚ 1.30 (.051) L/R 3 024-791 0 3 024-891 0 5 024-791 0 5 024-891 0
2nd Bicuspid Hook -7˚ 0˚ 1.30 (.051) L 3 024-813 0 3 024-913 0 5 024-813 0 5 024-913 0 R 3 024-812 0 3 024-912 0 5 024-812 0 5 024-912 0
Mandibular
Low Anterior -6˚ 0˚ 1.14 (.045) L/R 3 024-792 3 024-892 5 024-792 5 024-892
Cuspid -6˚ 3˚ 0.51 (.020) 2˚ L 3 024-7931 3 024-8931 5 024-7931 5 024-8931 R 3 024-7941 3 024-8941 5 024-7941 5 024-8941 0˚ 3˚ 2˚ L 3 024-3811 3 024-4811 5 024-3811 5 024-4811 R 3 024-3821 3 024-4821 5 024-3821 5 024-4821
Cuspid Hook -6˚ 3˚ 0.51 (.020) 2˚ L 3 024-8831 3 024-9831 5 024-8831 5 024-9831 R 3 024-8841 3 024-9841 5 024-8841 5 024-9841 0˚ 3˚ 2˚ L 3 024-7711 3 024-8711 5 024-7711 5 024-8711 R 3 024-7721 3 024-8721 5 024-7721 5 024-8721
1st Bicuspid -12˚ 2˚ 0.76 (.030) L 3 024-795 0 3 024-895 0 5 024-795 0 5 024-895 0 R 3 024-796 0 3 024-896 0 5 024-796 0 5 024-896 0
1st Bicuspid Hook -12˚ 2˚ 0.76 (.030) L 3 024-809 0 3 024-909 0 5 024-809 0 5 024-909 0 R 3 024-808 0 3 024-908 0 5 024-808 0 5 024-908 0
2nd Bicuspid -17˚ 2˚ 0.86 (.034) L 3 024-797 0 3 024-897 0 5 024-797 0 5 024-897 0 R 3 024-798 0 3 024-898 0 5 024-798 0 5 024-898 0
2nd Bicuspid Hook -17˚ 2˚ 0.86 (.034) L 3 024-811 0 3 024-911 0 5 024-811 0 5 024-911 0 R 3 024-810 0 3 024-910 0 5 024-810 0 5 024-910 0
© 2001-2008 3M. All rights reserved.016-928-3 0804
AlastiK, APC, MBT and Victory Series are trademarks of 3M.
APC™ PLUS Adhesive Coated Appliance System
.018 in. .022 in.APC™ II Adhesive Coated Appliance System
.018 in. .022 in.
Offs
et
5Use this prefix to order APC™ PLUS Adhesive Coated Appliance System with color change adhesive.
Offs
et
Offs
et
3 Use this prefix to order APC™ II Adhesive Coated Appliance System. 5
Use this prefix to order APC™ PLUS Adhesive Coated Appliance System with color change adhesive.
APC™ PLUS Adhesive Coated Appliance System
.018 in. .022 in.APC™ II Adhesive Coated Appliance System
.018 in. .022 in.One Patient Kits
U/L 5X5 1 Case Kit 3 024-100 3 024-120 5 024-100 5 024-120
U/L 5X5 Cuspid Hook 1 Case Kit 3 024-101 3 024-121 5 024-101 5 024-121
U/L 5X5 Hooks 1 Case Kit 3 024-102 3 024-122 5 024-102 5 024-122
U/L 5X5 Cuspid Hook 0º Torque Cuspid 1 Case Kit 3 024-104 3 024-124 5 024-104 5 024-124
U/L 5X5 Hooks 0º Torque Cuspid 1 Case Kit 3 024-105 3 024-125 5 024-105 5 024-125
WELDABLE BICUSPIDS: All Victory Series low profile bicuspid brackets are available as weldable bicuspid brackets. Add a "7" prefix before the 6-digit part number to indicate weldable.
33M UnitekOrthodontic Products2724 South Peck RoadMonrovia, CA 91016www.3MUnitek.com
