ELINGZO - 2012 · Grounding devices (MTR-MTF) 1800 Safety equipment (DPC-DPI) 1810. WINCHES. 980...
Transcript of ELINGZO - 2012 · Grounding devices (MTR-MTF) 1800 Safety equipment (DPC-DPI) 1810. WINCHES. 980...
-
2012
Stringing EquipmentMachines and Tools for Overhead Power Lines
Catalogue
-
IndexWinchesAMB101 1010
AMB206 / AMB207 1020
AMC402 1030
AMC501 1040
PullersARS200 1050
ARS301 1060
ARS403 1070
ARS400 1080
ARS510 1090
ARB501 1100
ARS500 1110
ARS606 1120
ARS700 / ARS701 1130
ARB600 / ARB707 1140
ARS802 1150
ARS907 1160
ARS910 1170
TensionersFRS301 1180
FRS403 / FRS400 1190
FRS404 1200
FRS506 / FRS500 1210
FRS507 1220
FRB518 1230
FRT607 1240
FRS615 1250
FRB616 1260
FRS620 1270
FRB600 1280
FRQ800 1290
Puller-TensionersAFS301 / AFS303 1300
AFS411 1310
AFS404 1320
AFS507 1330
AFB506 1340
AFS610 1350
AFB616 1360
AFQ705 / AFQ703 1370
Additional DevicesRemote controls (AX) 1380
Electronic pull and speed recorder (DLR) 1390
-
AccessoriesReel winders (RV) 1400
Cradle reel elevators (CVC) 1410
Hydraulic drum elevators (CVI) 1420
Hydraulic drum elevators heavy duty (CVI) 1430
Hydraulic drum elevators heavy duty (CVI) 1440
Reel Carrier Trailer (CVT) 1450
Standard reels (BOF) / Detachable reels (BOC) 1460
Anti-twisting steel braided rope (FUX) / High tech anti-twisting steel braided rope (FUH) 1470
Polypropylene-polyethylene rope (COH) / Nylon rope (COA) 1480
Guard rope pulleys (CGA) / Anti-lifting automatic release pulley (CAA) 1490
Single conductor pulleys (CAS) 1500
Two or three bundled conductors pulleys (CAT) / Four bundled conductors pulleys (CAQ) 1510
Two or three bundled conductors detachable pulleys (CST) / Four bundled conductors detachable pulleys (CSQ)
1520
Pulleys for helicopter stringing (CES-CET-CEQ) 1530
Six bundled conductors pulleys / Earthing devices for pulleys (MTX) / IEEE comply nylatron sectors 1540
Fibre optic cables head boards (RFF) / Two or three bundled conductors head boards (RB-RF) 1550
Four and fi ve bundled conductors head boards (RB-RF) 1560
Joints (GFT-GGT) 1570
Temporary mesh sock joints (GCT) 1580
Self gripping clamps (MOT) / Interchangeable jaws for MOT clamps 1590
Radial locking clamps (MOS) 1600
Hydraulic compressors (PRT-PRH) 1610
Accessories for hydraulic compressors (PRT-PRH) 1620
Cover joints (PG) / Thermometers (TET) 1630
Inspection trolleys (CRS) 1640
Inspection trolleys (CRB-CRT) 1650
Inspection trolleys (CR) 1660
Overhead lines bicycles (BI) 1670
Service snatch blocks (CZA-CZL) 1680
Cradle block fi bre optic cable replacer (ABR) 1690
Lifting tackles (TAP) / Lifting hoist (PAX) 1700
Tirfor (TFX) 1710
Cable cutters (TN) / Zoom sag-scope (TGP) 1720
Meter counter device (DLC) / Electronic dynamometers (DLE) / Hydraulic dynamometer (DLI) 1730
Light Alloy StructuresSupport structures (PIL) 1740
Working platforms (PLL) 1750
Light aluminium alloy ladders (SCP) 1760
Light aluminium alloy ladders (SCS-SCA) / Antifall devices (SDA) 1770
Derricks (FAL) 1780
Derricks (FAL) 1790
Safety DevicesGrounding devices (MTR-MTF) 1800
Safety equipment (DPC-DPI) 1810
-
WINCHES
-
980
760
750
1360
760
750
1010
AMB101
Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work.The winch is provided with a detachable capstan.
Hydraulic WinchAMB101
PerformanceMax pull 10 kNSpeed at max pull 1 km/hMax speed 1.9 km/h
Confi gurationNegative self-acting hydraulic brake
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
CharacteristicsDiameter capstan 220 mmMass 100 kgMass with ADT001 130 kg
EngineGasoline 5.1 kW (7 hp)Cooling system airStarting system by handle
Additional Devices
ALL102 Pulling rope locking device when capstan is used (compulsory for EC market)
ALL105 Rigid axle and towing bardetachable, for manual towing
ALL113 Handbarrow
Note: the basic machine performance is calculated at 20°C and at sea level
AMB101 with ADT001
AMB101 with ADT001 and ALL105
ADT001Drum with automatic level wind suitable for correct winding of the rope on the drum.External diameter 350 mmInternal diameter 200 mmWidth 400 mmCapacity 300 m rope Ø 8 mm
-
AMB206
1110
1450
1000
AMB207
1020Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic WinchesAMB206-AMB207
Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work.The winch is available in 2 versions: with 2 side capstans (Mod. AMB206) or with 1 side capstan and 1 drum with automatic level wind (Mod. AMB207).
PerformanceMax pull 15 kNSpeed at max pull 0.35 km/hMax speed 2.4 km/hPull at max speed 5 kN
Drum Specifi cationsExternal diameter 378 mmInternal diameter 220 mmWidth 215 mmCapacity 220 m rope Ø 8 mm
Confi gurationNegative self-acting hydraulic brake
EngineGasoline 8.1 kW (11 hp)Cooling system airElectrical system 12 V
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL102 Pulling rope locking device when capstan is used (compulsory for EC market)
ALL105 Rigid axle and towing bardetachable, for manual towing
Capstan Specifi cationsDiameter 220 mm
Characteristics Mod. AMB206Mass 300 kg
Characteristics Mod. AMB207Mass 320 kg
-
1350
1850
1500
1030Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work.
Hydraulic WinchAMC402
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemAutomatic level wind suitable for correct rope winding on the drumRigid axle for towing at max speed of 30 km/hTowing shaft with adjustable heightMechanical front stabiliser
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
PerformanceMax pull 30 kNSpeed at max pull 1.5 km/hMax speed 5 km/hPull at max speed 8.5 kN
Drum Specifi cationsExternal diameter 530 mmInternal diameter 355 mmWidth 700 mmCapacity 400 m rope Ø 14 mm
EngineDiesel 25 kW (34 hp)Cooling system waterElectrical system 12 V
CharacteristicsMass 1000 kg
Note: the basic machine performance is calculated at 20°C and at sea level
-
1750
1720
2280
1040Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic WinchAMC501
Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemAutomatic level wind suitable for correct rope winding on the drumRigid axle for towing at max speed of 30 km/hTowing shaft with adjustable heightMechanical front stabiliser
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
PerformanceMax pull 50 kNSpeed at max pull 1.3 km/hMax speed 6 km/hPull at max speed 10.5 kN
Drum Specifi cationsExternal diameter 700 mmInternal diameter 457 mmWidth 700 mmCapacity 400 m rope Ø 18 mm
EngineDiesel 34 kW (46 hp)Cooling system waterElectrical system 12 V
CharacteristicsMass 1600 kg
Note: the basic machine performance is calculated at 20°C and at sea level
-
PULLERS
-
ALL111
800
1425
695
1425
ALL107
1050Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated steel.
Hydraulic PullerARS200
PerformanceMax pull 15 kNSpeed at max pull 0.7 km/hMax speed 3.6 km/hPull at max speed 4 kN
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullOn board reel winder with automatic level wind and special reel BOF370 for 500 m of Ø 8 mm rope
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
CharacteristicsBull-wheel diameter 200 mmMax rope diameter 8 mmMass (without rope) 500 kg
EngineGasoline 13 kW (18 hp)Cooling system airElectrical system 12 V
Additional Devices
ALL102 Pulling rope locking device when capstan is used (compulsory for EC market)
ALL105 Rigid axle and towing bardetachable, for manual towing
ALL107 Capstan (diameter=220 mm equipped with guide rope rollers)
ALL111 Swivel guide rope rollerALL112 Trailer for towing at max speed of
80 km/h with mechanical parking brake.Towing shaft with inertial braking system. Hook with Ø 40 mm eye.Lighting system included
Note: the basic machine performance is calculated at 20°C and at sea level
-
ALL110
LOMBARDINI~A OK
M
TP
ERE
O
E
GNC
Y
S
1600
1400
1690
ALL111
DLR300
1060Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS301
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.
PerformanceMax pull 25 kNSpeed at max pull 1.4 km/hMax speed 3.5 km/hPull at max speed 10 kN
CharacteristicsBull-wheel diameter 250 mmMax rope diameter 10 mmMass 700 kg
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/hOn board reel winder with automatic level wind, suitable for standard reel mod. BOF010 and BOF020Electronic pull and speed recorder kit (instrument not included)Pull pre-setting systemMechanical front stabiliserGrounding connection point
EngineDiesel 25 kW (34 hp)Cooling system waterElectrical system 12 V
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL110 Underground cable pulling attachment
ALL111 Swivel guide rope rollerALL112 Trailer for towing at max speed of
80 km/h with mechanical parking brake.Towing shaft with inertial braking system. Hook with Ø 40 mm eye.Lighting system included
AXR001 Extra shaftDLR300 Electronic pull and speed recorder
-
1600
1490
1900
ALL111ALL110
DLR300
1070Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS403
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/hOn board reel winder with automatic level wind, suitable for standard reel mod. BOF010 and BOF020Electronic pull and speed recorder kit (instrument not included)Pull pre-setting systemMechanical front stabiliserGrounding connection point
PerformanceMax pull 35 kNSpeed at max pull 1.2 km/hMax speed 3.6 km/hPull at max speed 12 kN
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
CharacteristicsBull-wheel diameter 325 mmMax rope diameter 13 mmMass 850 kg
EngineDiesel 25 kW (34 hp)Cooling system waterElectrical system 12 V
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL110 Underground cable pulling attachment
ALL111 Swivel guide rope rollerALL112 Trailer for towing at max speed of
80 km/h with mechanical parking brake.Towing shaft with inertial braking system. Hook with Ø 40 mm eye.Lighting system included
AXR001 Extra shaftDLR300 Electronic pull and speed recorder
-
2240
2800
1740
1080Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS400
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.The machine is completely electronically controlled.
PerformanceMax pull 45 kNSpeed at max pull 2 km/hMax speed 5 km/hPull at max speed 17.5 kN
CharacteristicsBull-wheel diameter 400 mmMax rope diameter 16 mmMass 2000 kg
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeOn board reel winder with automatic level wind, suitable for standard reel mod. BOF010 and BOF020 Mechanical front stabiliserGrounding connection point
EngineDiesel 48 kW (64 hp)Cooling system waterElectrical system 12 V
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 Hydraulic rope clamp for reel change operations
AXR001 Extra shaftDLR300 Electronic pull and speed recorder
-
1765
2530
2150
ALL111
DLR300
1090Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS510
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/hOn board reel winder with automatic level wind, suitable for standard reel mod. BOF010 and BOF020Electronic pull and speed recorder kit (instrument not included)Pull pre-setting systemMechanical front stabiliserGrounding connection point
PerformanceMax pull 70 kNSpeed at max pull 1.8 km/hMax speed 4 km/hPull at max speed 32 kN
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
CharacteristicsBull-wheel diameter 400 mmMax rope diameter 16 mmMass 2100 kg
EngineDiesel 60 kW (81 hp)Cooling system waterElectrical system 12 V
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL071 Hydraulic rope clamp for reel change operations
ALL111 Swivel guide rope rollerAXR001 Extra shaftDLR300 Electronic pull and speed recorder
-
2340
3600
2260
1100Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARB501
The machine is suitable to string one or two independent ropes.The bull-wheel grooves are made of heat treated steel. The machine is completely electronically controlled.
Confi guration2 negative self-acting hydraulic brakes2 hydraulic dynamometers with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeOn board 2 reel winders with automatic level wind, suitable for standard reel mod. BOF010 and BOF020Hydraulic front stabiliserGrounding connection point
PerformanceMax pull 2 x 40 kN
or 1 x 80 kNSpeed at max pull 2.4 km/hMax speed 5 km/hPull at max speed 2 x 15 kN
or 1 x 30 kN
Hydraulic Transmission2 closed hydraulic circuits for stepless speed variation in both rotating directions.This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 540 mmMax rope diameter 18 mmMass 4500 kg
EngineDiesel 104 kW (140 hp)Cooling system waterElectrical system 12 V
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 2 hydraulic rope clamps for reel change operations
AXR001 Extra shaftDLR300 Electronic pull and speed recorder
-
2560
3360
2260
1110Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
PerformanceMax pull 90 kNSpeed at max pull 2.4 km/hMax speed 5 km/hPull at max speed 44 kN
CharacteristicsBull-wheel diameter 450 mmMax rope diameter 18 mmMass 3250 kg
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeOn board reel winder with automatic level wind, suitable for standard reel mod. BOF010 and BOF020 Hydraulic front stabiliserGrounding connection point
EngineDiesel 104 kW (140 hp)Cooling system waterElectrical system 12 V
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 Hydraulic rope clamp for reel change operations
ALL089 Connection of multiple machines and electronic speed synchronizing system
AXR001 Extra shaftDLR300 Electronic pull and speed recorder
Hydraulic PullerARS500
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.The machine is completely electronically controlled.
-
3900
2180
2410
ALL111
DLR300
1120Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS606
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.
PerformanceMax pull 140 kNSpeed at max pull 2 km/hMax speed 4.5 km/hPull at max speed 60 kN
CharacteristicsBull-wheel diameter 600 mmMax rope diameter 24 mmMass 4800 kg
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/hOn board reel winder with automatic level wind, suitable for standard reel mod. BOF010 BOF020 Electronic pull and speed recorder kit (instrument not included) Pull pre-setting system Hydraulic front stabiliserGrounding connection point
EngineDiesel 129 kW (173 hp)Cooling system waterElectrical system 12 V
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL071 Hydraulic rope clamp for reel change operations
ALL111 Swivel guide rope rollerAXR001 Extra shaftDLR300 Electronic pull and speed recorder
-
4285
2270
2750
1130Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullersARS700-ARS701
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.The machine is completely electronically controlled.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeOn board reel winder with automatic level wind, suitable for standard reel mod. BOF010 and BOF020Hydraulic front stabiliserGrounding connection point
Performance Mod. ARS700Max pull 160 kNSpeed at max pull 2.5 km/hMax speed 5 km/hPull at max speed 80 kN
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reducedto “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 600 mmMax rope diameter 24 mmMass 6000 kg
EngineDiesel 209 kW (280 hp)Cooling system waterElectrical system 24 V
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL010 Hydraulic power pack to control a
separate reel winderALL022 Hydraulic quick connectors to
control a separate reel winder instead of the built-in one
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL070 Extra rollers for an additional pilot rope
ALL071 Hydraulic rope clamp for reel change operations
ALL089 Connection of multiple machines and electronic speed synchronizing system
ALL111 Swivel guide rope rollerAXR001 Extra shaftDLR300 Electronic pull and speed recorder
Performance Mod. ARS701Max pull 180 kNSpeed at max pull 2.2 km/hMax speed 5 km/hPull at max speed 80 kN
ARS700 with ALL071
-
3000
2525
4720
1140Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullersARB600-ARB707
The machine is suitable to string one or two independent ropes.The bull-wheel grooves are made of heat treated steel.The machine is completely electronically controlled.
Confi guration2 negative self-acting hydraulic brakes2 hydraulic dynamometers with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brake2 on board reel winders with automatic level wind, suitable for standard reel mod. BOF010 and BOF020Hydraulic front stabiliserGrounding connection point
Performance Mod. ARB600Max pull 2 x 75 kN
or 1 x 150 kNSpeed at max pull 2.6 km/hMax speed 4.5 km/hPull at max speed 2 x 45 kN
or 1 x 90 kN
Hydraulic Transmission2 closed hydraulic circuits for stepless speed variation in both rotating directions. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 600 mmMax rope diameter 24 mmMass 8500 kg
EngineDiesel 209 kW (280 hp)Cooling system waterElectrical system 24 V
Note: the basic machine performance is calculated at 20°C and at sea level
Performance Mod. ARB707Max pull 2 x 90 kN
or 1 x 180 kNSpeed at max pull 2.2 km/hMax speed 4.5 km/hPull at max speed 2 x 45 kN
or 1 x 90 kN Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL037 Preheating device for use up to
-30°CALL051 Cable remote control kit
(instrument not included)ALL053 Electronic pull and speed recorder
kit (instrument not included)ALL059 Radio remote control kit
(instrument not included)ALL071 2 hydraulic rope clamps for reel
change operationsAXR001 Extra shaftDLR300 Electronic pull and speed recorder
-
3630
5165
2500
1150Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS802
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.The machine is completely electronically controlled.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling system Control instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeOn board reel winder with automatic level wind, suitable for standard reel mod. BOF020 and BOF030Hydraulic front stabiliserGrounding connection point
PerformanceMax pull 240 kNSpeed at max pull 2.5 km/hMax speed 4.5 km/hPull at max speed 130 kN
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 800 mmMax rope diameter 32 mmMass 9500 kg
EngineDiesel 280 kW (375 hp)Cooling system waterElectrical system 24 V
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL010 Hydraulic power pack to control a
separate reel winderALL022 Hydraulic quick connectors to
control a separate reel winder instead of the built-in one
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL070 Extra rollers for an additional pilot rope
ALL071 Hydraulic rope clamp for reel change operations
ALL089 Connection of multiple machines and electronic speed synchronizing system
AXR002 Extra shaftDLR300 Electronic pull and speed recorder
ARS802 with ALL071
-
3160
5310
2490
1160Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS907
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.The machine is completely electronically controlled.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling system Control instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeOn board reel winder with automatic level wind, suitable for standard reel mod. BOF020 and BOF030Hydraulic front stabiliserGrounding connection point
PerformanceMax pull 280 kNSpeed at max pull 2.2 km/hMax speed 5 km/hPull at max speed 117 kN
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 960 mmMax rope diameter 38 mmMass 13500 kg
EngineDiesel 328 kW (440 hp)Cooling system waterElectrical system 24 V
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL010 Hydraulic power pack to control a
separate reel winderALL022 Hydraulic quick connectors to
control a separate reel winder instead of the built-in one
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL070 Extra rollers for an additional pilot rope
ALL071 Hydraulic rope clamp for reel change operations
AXR002 Extra shaftDLR300 Electronic pull and speed recorder
-
3160
5265
2490
1170Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic PullerARS910
The machine is suitable to string one rope.The bull-wheel grooves are made of heat treated steel.The machine is completely electronically controlled.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling system Control instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeOn board reel winder with automatic level wind, suitable for standard reel mod. BOF020 and BOF030Hydraulic front stabiliserGrounding connection point
PerformanceMax pull 360 kNSpeed at max pull 2 km/hMax speed 4.3 km/hPull at max speed 160 kN
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.This machine is provided with a pull presetting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 960 mmMax rope diameter 38 mmMass 14000 kg
EngineDiesel 328 kW (440 hp)Cooling system waterElectrical system 24 V
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL010 Hydraulic power pack to control a
separate reel winderALL022 Hydraulic quick connectors to
control a separate reel winder instead of the built-in one
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL070 Extra rollers for an additional pilot rope
ALL071 Hydraulic rope clamp for reel change operations
AXR002 Extra shaftDLR300 Electronic pull and speed recorder
-
TENSIONERS
-
2780
3630
1730
1180Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRS301
The machine is suitable to string one rope and cable conductor with fi bre-optical cables (OPGW).The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometerHydraulic oil cooling systemMechanical meter counterRigid axle for towing at max speed of 30 km/h with mechanical parking brakeGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (1.5 ÷ 5 kN)• nominal tension positionMechanical front stabiliserGrounding connection point
PerformanceMax tension 25 kNMax speed 5 km/h
Hydraulic TransmissionHydraulic open circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 36 mmMass 1950 kg
Note: the basic machine performance is calculated at 20°C and at sea level
-
2765
3700
1810
FRS403
FRS400
2520
3280
1810
1190Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionersFRS403-FRS400
The machine is suitable to string one or two ropes or bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometerHydraulic oil cooling systemMechanical meter counterRigid axle for towing at max speed of 30 km/h with mechanical parking brakeGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (2 ÷ 6 kN)• nominal tension positionMechanical front stabiliserGrounding connection point
PerformanceMax tension 40 kNMax speed 5 km/h
Hydraulic TransmissionHydraulic open circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
Characteristics Mod. FRS403Bull-wheel diameter 1500 mmMax conductor diameter 34 mmMass 2300 kg
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL080 Special nylon sectors kit
Characteristics Mod. FRS400Bull-wheel diameter 1200 mmMax conductor diameter 34 mmMass 1900 kg
-
2765
3700
1810
1200Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRS404
The machine is suitable to string one or two ropes or bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometerHydraulic oil cooling systemMechanical meter counterRigid axle for towing at max speed of 30 km/h with mechanical parking brakeGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (2 ÷ 6 kN)• nominal tension positionHydraulic power pack to control up to 2 separate drum stands with hydraulic motor, not independent controlMechanical front stabiliserGrounding connection point
Tensioner PerformanceMax tension 40 kNMax speed 5 km/h
Hydraulic TransmissionHydraulic open circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 34 mmMass 2600 kg
EngineDiesel 25 kW (34 hp)Cooling system waterElectrical system 12 V
Pull-Back PerformanceMax pull 40 kNMax speed 0.8 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL071 Hydraulic conductor clamp for drum change operations
ALL080 Special nylon sectors kit
-
3670
2810
2050
FRS506
FRS500
2560
3330
2060
1210Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionersFRS506-FRS500
The machine is suitable to string one or two ropes or bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometerHydraulic oil cooling systemMechanical meter counterRigid axle for towing at max speed of 30 km/h with mechanical parking brakeGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (5 ÷ 20 kN)• nominal tension positionMechanical front stabiliserGrounding connection point
PerformanceMax tension 75 kNMax speed 5 km/h
Hydraulic TransmissionHydraulic open circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
Characteristics Mod. FRS506Bull-wheel diameter 1500 mmMax conductor diameter 34 mmMass 2900 kg
Note: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL080 Special nylon sectors kit
Characteristics Mod. FRS500Bull-wheel diameter 1200 mmMax conductor diameter 34 mmMass 2400 kg
-
2820
3660
2030
1220Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRS507
The machine is suitable to string one or two ropes or bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometerHydraulic oil cooling systemMechanical meter counterRigid axle for towing at max speed of 30 km/h with mechanical parking brakeGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (5 ÷ 20 kN)• nominal tension positionHydraulic power pack to control up to 2 separate drum stands with hydraulic motor, not independent controlMechanical front stabiliserGrounding connection point
Tensioner PerformanceMax tension 75 kNMax speed 5 km/h
Hydraulic TransmissionHydraulic open circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 34 mmMass 3100 kg
EngineDiesel 25 kW (34 hp)Cooling system waterElectrical system 12 V
Pull-Back PerformanceMax pull 75 kNMax speed 0.7 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL071 2 hydraulic conductor clamps for drum change operations
ALL080 Special nylon sectors kit
-
2910
3700
2360
1230Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRB518
The machine is suitable to string one or two ropes or bundled conductors with two pairs of bull-wheels with completely independent controls.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Confi guration2 negative self-acting hydraulic brakes2 hydraulic dynamometersHydraulic oil cooling system2 digital meter counters2 digital speed metersControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 2 separate drum stands with hydraulic motorHydraulic front stabiliserGrounding connection point
Hydraulic Transmission2 hydraulic half-closed circuits that allow very sensitive tensioning control and negligible deviations of tension in case of speed change.The machine is provided with tension pre-setting system.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 40 mmMass 5200 kg
EngineDiesel 36 kW (48 hp)Cooling system waterElectrical system 12 V
Pull-Back PerformanceMax pull 2 x 50 kN
or 1 x 100 kNMax speed 2 x 0.5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL005 Hydraulic power for an external
compressorALL037 Preheating device for use up to
-30°CALL071 2 hydraulic conductor clamps for
drum change operationsALL080 Special nylon sectors kitALL084 2 gearboxes with 3 operating
positions:• neutral position (with free
bull-wheels for conductor loading and unloading)
• low tension position (3 ÷ 12 kN)
• nominal tension positionALL089 Connection of multiple machines
and electronic speed synchronizing system
Tensioner PerformanceMax tension 2 x 50 kN
or 1 x 100 kNMax speed 5 km/h
-
3100
4800
2300
1240Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRT607
This machine is suitable to string one, two, three ropes or bundled conductors with three pairs of bull-wheels with completely independent controls.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Confi guration3 negative self-acting hydraulic brakes3 hydraulic dynamometersHydraulic oil cooling system3 digital meter counters3 digital speed-metersControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 3 separate drum stands with hydraulic motorHydraulic front stabiliserGrounding connection point
Tensioner PerformanceMax tension 3 x 45 kN
or 1 x 90 kN + 1 x 45 kNMax speed 5 km/h
Hydraulic Transmission3 half-closed hydraulic circuits that allow very sensitive tensioning control and negligible deviations of tension in case of speed change.The machine is provided with tension pre-setting system.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 40 mmMass 8700 kg
EngineDiesel 48 kW (64 hp)Cooling system waterElectrical system 24 V
Pull-Back PerformanceMax pull 3 x 45 kN
or 1 x 90 kN + 1 x 45 kNMax speed 3 x 1.3 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL005 Hydraulic power for an external
compressorALL037 Preheating device for use up to
-30°CALL071 3 hydraulic conductor clamps for
drum change operations
-
2920
3960
2500
1250Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRS615
The machine is suitable to string one, two, three or four bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter counterControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 4 reel stands with hydraulic head, not independent controlHydraulic front stabiliserGrounding connection point
Tensioner PerformanceMax tension 140 kNMax speed 5 km/h
Hydraulic TransmissionHydraulic circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 40 mmMass 6200 kg
EngineDiesel 48 kW (64 hp)Cooling system waterElectrical system 24 V
Pull-Back PerformanceMax pull 140 kNMax speed 1.8 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL005 Hydraulic power for an external
compressorALL037 Preheating device for use up to
-30°CALL071 4 hydraulic conductor clamps for
drum change operationsALL080 Special nylon sectors kitALL089 Connection of multiple machines
and electronic speed synchronizing system
-
4300
2500
3220
1260Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRB616
The machine is suitable to string one or two ropes or bundled conductors with two pairs of bull-wheels with completely independent controls.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Confi guration2 negative self-acting hydraulic brakes2 hydraulic dynamometersHydraulic oil cooling system2 digital meter counters2 digital speed metersControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 2 separate drum stands with hydraulic motorHydraulic front stabiliserGrounding connection point
Tensioner PerformanceMax tension 2 x 70 kN
or 1 x 140 kNMax speed 5 km/h
Hydraulic Transmission2 hydraulic half-closed circuits that allow very sensitive tensioning control and negligible deviations of tension in case of speed change.The machine is provided with tension pre-setting system.
CharacteristicsBull-wheel diameter 1700 mmMax conductor diameter 46 mmMass 7600 kg
EngineDiesel 48 kW (64 hp)Cooling system waterElectrical system 24 V
Pull-Back PerformanceMax pull 2 x 70 kN
or 1 x 140 kNMax speed 2 x 0.7 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL005 Hydraulic power for an external
compressorALL037 Preheating device for use up to
-30°CALL071 2 hydraulic conductor clamps for
drum change operationsALL084 2 gearboxes with 3 operating
positions:• neutral position (with free
bull-wheels for conductor loading and unloading)
• low tension position (5 ÷ 20 kN)
• nominal tension positionALL089 Connection of multiple machines
and electronic speed synchronizing system
FRB616 with ALL071 and ALL089
-
3100
4220
2480
ALL064
3100
4220
1270Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRS620
The machine is suitable to string from one to six bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter counterControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 4 or 6 reel stands with hydraulic head, not independent controlHydraulical front stabilizerGrounding connection point
Tensioner PerformanceMax tension 150 kNMax speed 4.7 km/h
Hydraulic TransmissionHydraulic circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
EngineDiesel 48 kW (64 hp)Cooling system waterElectrical system 24 V
Pull-Back PerformanceMax pull 150 kNMax speed 1.6 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL005 Hydraulic power for an external
compressorALL037 Preheating device for use up to
-30°CALL064 Bogie suspensionALL071 4 or 6 hydraulic conductor clamps
for drum change operationsALL080 Special nylon sectors kitALL089 Connection of multiple machines
and electronic speed synchronizing system
NEW
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 45 mm (QUAD)
or 29 mm (HEXA)Mass 6600 kg
FRS620 with ALL064
-
3010
4940
2410
1280Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRB600
The machine is suitable to string one, two, three or four ropes or bundled conductors with two pairs of bull-wheels with completely independent controls.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Confi guration2 negative self-acting hydraulic brakes2 hydraulic dynamometersHydraulic oil cooling system2 digital meter counters2 digital speed-metersControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 4 separate drum stands with hydraulic motor with 2 independent controlsHydraulic front stabiliserGrounding connection point
Tensioner PerformanceMax tension 2 x 75 kNMax speed 5 km/h
Hydraulic Transmission2 hydraulic half-closed circuits that allow very sensitive tensioning control and negligible deviations of tension in case of speed change.The machine is provided with tension pre-setting system.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 38 mmMass 7500 kg
EngineDiesel 48 kW (64 hp)Cooling system waterElectrical system 24 V
Pull-Back PerformanceMax pull 2 x 75 kNMax speed 0.6 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL005 Hydraulic power for an external
compressorALL037 Preheating device for use up to
-30°CALL071 4 hydraulic conductor clamps for
drum change operationsALL080 Special nylon sectors kitALL089 Connection of multiple machines
and electronic speed synchronizing system
-
3100
4800
2310
1290Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic TensionerFRQ800
The machine is suitable to string one, two, three or four ropes or bundled conductors with four pairs of bull-wheels with completely independent controls.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine makes it possible to recover the pulling rope when stringing a line with three bundled conductors by using a ring system.The machine is completely electronically controlled.
Confi guration4 negative self-acting hydraulic brakes4 hydraulic dynamometersHydraulic oil cooling system4 digital meter counters4 digital speed-metersControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 4 separate drum stands with hydraulic motorHydraulic front stabiliserGrounding connection point
Tensioner PerformanceMax tension 4 x 50 kN
or 2 x 100 kNMax speed 5 km/h
Hydraulic Transmission4 half-closed hydraulic circuits that provide very sensitive tensioning control and negligible deviations of tension in case of speed change.The machine is provided with tension pre-setting system.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 40 mmMass 10500 kg
EngineDiesel 86 kW (115 hp)Cooling system waterElectrical system 24 V
Pull-Back PerformanceMax pull 4 x 50 kN
or 2 x 100 kNMax speed 4 x 0.9 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL001 Lighting system for the trailerALL002 Air brake system for the trailerALL005 Hydraulic power for an external
compressorALL037 Preheating device for use up to
-30°CALL071 4 hydraulic conductor clamps for
drum change operations
-
PULLER-TENSIONERS
-
2810
1760
3670
1300Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic Puller-TensionersAFS301-AFS303
The machine is suitable to string one rope or one conductor.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemMechanical meter counterControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control 1 drum stand with hydraulic motor or 1 reel winderGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (1 ÷ 5 kN)• nominal tension positionGrounding connection point
Hydraulic TransmissionClosed hydraulic circuit that allows stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 36 mmMax rope diameter 10 mmMass 2300 kg
EngineDiesel 25 kW (34 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 25 kNMax speed 5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL005 Hydraulic power for an external compressor
ALL037 Preheating device for use up to -30°C
ALL053 Electronic pull and speed recorder kit (instrument not included)
DLR300 Electronic pull and speed recorder
Mod. AFS301
Special Version Mod. AFS303With electronic control and 34 kW (46 hp) engine
Puller PerformanceMax pull 25 kNSpeed at max pull 1.3 km/hMax speed 4 km/hPull at max speed 8 kN
-
2575
3260
1960
1310Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic Puller-TensionerAFS411
The machine is suitable to string one rope or one conductor.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemMechanical meter counterControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control 1 drum stand with hydraulic motor or 1 reel winderGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (1 ÷ 6 kN)• nominal tension positionMechanical front stabiliserGrounding connection point
Additional Devices
ALL037 Preheating device for use up to -30°C
ALL053 Electronic pull and speed recorder kit (instrument not included)
DLR300 Electronic pull and speed recorder
Puller PerformanceMax pull 35 kNSpeed at max pull 2.6 km/hMax speed 4.5 km/hPull at max speed 20 kN
Hydraulic TransmissionClosed hydraulic circuit that allows stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 1200 mmMax conductor diameter 34 mmMax rope diameter 13 mmMass 2200 kg
EngineDiesel 48 kW (64 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 35 kNMax speed 4.5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
-
2840
3550
1960
1320Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic Puller-TensionerAFS404
The machine is suitable to string one or two ropes or bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Note: The machine is also available with:• bull-wheel grooves made of wear-proof
heat and chemically treated steel• bull-wheel grooves of 1200 mm made
with both solution, nylon and steel
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter counterControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control 2 reel stands with hydraulic head or 2 reel windersGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (1 ÷ 7 kN)• nominal tension positionMechanical front stabiliserGrounding connection point
Puller PerformanceMax pull 45 kNSpeed at max pull 2.7 km/hMax speed 5 km/hPull at max speed 25 kN
Hydraulic TransmissionClosed hydraulic circuit that allows stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to ”0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 34 mmMax rope diameter 16 mmMass 3000 kg
EngineDiesel 63 kW (85 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 45 kNMax speed 5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL005 Hydraulic power for an external compressor
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 1 or 2 hydraulic rope/conductor clamps for reel/drum change operations
DLR300 Electronic pull and speed recorder
-
2760
3950
2260
1330Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic Puller-TensionerAFS507
The machine is suitable to string one or two ropes or bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Note: The machine is also available with:• bull-wheel grooves made of wear-proof
heat and chemically treated steel• bull-wheel grooves of 1200 mm made
with both solution, nylon and steel
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter counterControl instruments for hydraulics system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 2 reel stands with hydraulic head or 2 reel windersHydraulic front stabiliserGrounding connection point
Additional Devices
ALL005 Hydraulic power for an external compressor
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 1 or 2 hydraulic rope/conductor clamps for reel/drum change operations
ALL084 Gearbox with 3 operating positions:• neutral position (with free
bull-wheels for conductor loading and unloading)
• low tension position (6 ÷ 22 kN)
• nominal tension positionALL089 Connection of multiple machines
and electronic speed synchronizing system
DLR300 Electronic pull and speed recorder
Puller PerformanceMax pull 90 kNSpeed at max pull 2.4 km/hMax speed 5 km/hPull at max speed 44 kN
Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 40 mmMax rope diameter 18 mmMass 4600 kg
EngineDiesel 104 kW (140 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 90 kNMax speed 5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
-
2900
4080
2360
1340Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic Puller-TensionerAFB506
The machine is suitable to string one or two ropes or bundled conductors with two pairs of bull-wheels with completely independent controls.The bull-wheel grooves are made of wear-proof nylon sectors.The machine is completely electronically controlled.
Note: The machine is also available with:• bull-wheel grooves made of wear-
proof heat and chemically treated steel (AFB516)
• bull-wheel grooves of 1200 mm made in steel (AFB501)
Confi guration2 negative self-acting hydraulic brakes2 hydraulic dynamometers with set-point and automatic control of maximum pullHydraulic oil cooling system2 digital meter countersControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 2 reel stands with hydraulic head or 2 reel winders with independent controls1 gearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (3 ÷ 14 kN)• nominal tension positionSynchronising mechanismHydraulic front stabiliserGrounding connection point
Puller PerformanceMax pull 2 x 45 kN
or 1 x 90 kNSpeed at max pull 2.4 km/hMax speed 5 km/hPull at max speed 2 x 22 kN
or 1 x 44 kN
Hydraulic Transmission2 closed hydraulic circuits for stepless speed variation in both rotating directions. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 40 mmMax rope diameter 18 mmMass 6200 kg
EngineDiesel 104 kW (140 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 2 x 45 kN
or 1 x 90 kNMax speed 5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Additional Devices
ALL005 Hydraulic power for an external compressor
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (for one rope or conductor)(instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 2 hydraulic rope/conductor clamps for reel/drum change operations
ALL084 2nd gearbox with 3 operating positions
ALL089 Connection of multiple machines and electronic speed synchronizing system
DLR300 Electronic pull and speed recorder
-
4100
2500
2950
1350Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic Puller-TensionerAFS610
The machine is suitable to string one, two, three or four ropes or bundled conductors.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
Confi gurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter counterControl instruments for hydraulics system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control 4 drum stands with hydraulic motor or 4 reel winders with independent commandsHydraulic front stabiliserGrounding connection point
Additional Devices
ALL005 Hydraulic power for an external compressor
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 1, 2, 3 or 4 hydraulic rope/conductor clamps for reel/drum change operations
ALL080 Special nylon sectors kitALL089 Connection of multiple machines
and electronic speed synchronizing system
DLR300 Electronic pull and speed recorder
Puller PerformanceMax pull 140 kNSpeed at max pull 1.7 km/hMax speed 4 km/hPull at max speed 60 kN
Hydraulic TransmissionClosed hydraulic circuit that allows stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 40 mmMax rope diameter 24 mmMass 6800 kg
EngineDiesel 129 kW (173 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 140 kNMax speed 4 km/hNote: the basic machine performance is calculated at 20°C and at sea level
-
4300
2500
3220
1360Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2012/01
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Hydraulic Puller-TensionerAFB616
The machine is suitable to string one or two ropes or bundled conductors on bull-wheels with two pairs of bull-wheels with completely independent controls.The bull-wheel grooves are made of wear-proof interchangeable nylon sectors.The machine is completely electronically controlled.
Confi guration2 negative self-acting hydraulic brakes2 hydraulic dynamometers with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter countersControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control up to 2 reel stands with hydraulic head or 2 reel winders with independent controlsHydraulically front stabiliserGrounding connection point
Additional Devices
ALL005 Hydraulic power for an external compressor
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL053 Electronic pull and speed recorder kit (for one rope or conductor) (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 2 hydraulic rope/conductor clamps for reel/drum change operations
ALL084 1 or 2 gearboxes with 3 operating positions:• neutral position (with free
bull-wheels for conductor loading and unloading)
• low tension position (5 ÷ 20 kN)
• nominal tension positionALL089 Connection of multiple machines
and electronic speed synchronizing system
Puller PerformanceMax pull 2 x 70 kN
or 1 x 140 kNSpeed at max pull 2 km/hMax speed 4.5 km/hPull at max speed 2 x 30 kN
or 1 x 60 kN
Hydraulic Transmission2 closed hydraulic circuits for stepless speed variation in both rotating directions.This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsNominal bull-wheel diameter 1700 mmMax conductor diameter 46 mmMax rope diameter 24 mmMass 8000 kg
EngineDiesel 129 kW (173 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 2 x 70 kN
or 1 x 140 kNMax speed 4.5 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
NEW
AFB616 with ALL071
-
6450
3380
2460
8600
3420
1370Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562