Eletca materiali Compositi - composite · PDF fileEletca_materiali Compositi - composite...
Transcript of Eletca materiali Compositi - composite · PDF fileEletca_materiali Compositi - composite...
ELET.CA
COMPOSITE MATERIALS
CORAX® Armors
Elet.Ca armors are developed to ensure a superior level of ballistic protection and quality, employing typical ae-rospace industry techniques for the construction of com-posite materials parts. Armors are manufactured using specifi c pre-impregnated material, with the resin applied through a fully automated industrial process.
This grants to the products an ideal saturation of the re-sin, thus eliminating porosities and voids between matrix and fi bers, and ensuring an optimal bonding within layers. The panels meet the strictest military standards, as far as the environmental (MIL STD 810) and structural require-ments are concerned. Armors can be delivered also turnkey, complete with the fi xtures for fastening on the vehicle.
TYPICAL CONFIGURATIONS
Corax type Ammunitions Norm Thickness (mm) Weight (kg/m2)
KF112 9 mm Parabellum UNI EN 1522 FB2 5.5 6.0
KF124 357 Magnum H.J.H.P. UNI EN 1522 FB4 11.0 11.5
KF124 44 Magnum H.J.H.P. UNI EN 1522 FB4 11.0 11.5
KR128 7.62 x 51 NATO Stell Jacket UNI EN 1522 FB6 18.0 33.0
KR132 7.62 x 51 NATO AP UNI EN 1522 FB7 22.0 47.0
KRC246 7.62 x 51 NATO ball STANAG AEP55 Liv. 1 19.0 37.0
KRC256 7.62 x 39 API STANAG AEP55 Liv. 2 19.0 37.0
KRC266 7.62 x 54 ball Drag. API STANAG AEP55 Liv. 3 24.0 55.0
KRC280 12.7 x 99 AP M2 - 29.0 75.0
KRC296 14.5 x 144 API STANAG AEP55 Liv. 4 40.0 115.0
CORAX ANTI BULLETMainly designed to be bulletproof. The following table shows the main features and level of protection.
Thickness 18 mmWeight 35 kg7,62x51 NATO BallSS109 LIV. 1 AEP55
Thickness 23 mmWeight 54 kgDragunov - 936 m/s 7,62x54 APILIV. 3 4569
Thickness 18 mmWeight 36 kgKalashnikov - 7,62x39 APILIV. 2 AEP55
Thickness 24,5 mmWeight 60 kgAP WC CORE 7,62x51LIV. 3 4569
Thickness 23 mmWeight 54 kgDragunov 7,62x54 APILIV. 3 AEP55
Ballistic protection examples, anti bullet panels
TYPICAL CONFIGURATIONS
Corax type Speed (m/sec) - V50 Thickness (mm) Weight (kg/m2)
KF142 780 20.0 20.0
KF135 740 16.5 16.5
KF132 690 15.0 15.0
KR128 630 13.0 13.0
KF122 610 11.0 11.0
KF32/2 690 14.5 18.0
KF32/4 740 15.5 20.0
CORAX ANTI FRAGMENTMainly designed to be installed inside the basic armor, in order to minimize the “fragment” effect and prevent the related fragmentation.The table shows the main features and level of protection.
CORAX ARMORED DOORSElet.Ca has developed Corax® anti bullet panels for ap-plication in armored doors according to the most com-mon UNI EN 1522 homologations:
FB2 9 mm parabellum thickness 6 mm weight 6.0 kg/m2
Thanks to the panels’ light weight, the substitution of door hinges is not required; inserting the panels into the door structure is also made easier. According to the door specifi cations, panels can be sup-plied with slots to accommodate locks, bars and handles.
Corax® panels can also be employed as the structure for the door itself and can be easily painted. In addition to anti-bullet properties, panels guarantee protection against pointed tools such as pick axes.
Superior protection levels (eg. to diamond grinding wheels) can be obtained through panels of different composition and weight.
FB444 magnum and 357 magnumthickness 11 mmweight 12 kg/m2
CORAX®
PERSONAL PROTECTIONHARD PLATES
Corax® personal protection hard plates by Elet.Ca use advanced composite materials and can be employed either as vests or as stand-alone plates in other military or civilian applications. The use of innovative aluminium oxide (Al2O3) compounds on the strike face and of dif-ferent compositions in the backing allow for multi-hit
resistance compared to boron carbide plates - up to lev-el IV according to NIJ norms - while maintaining lower weight compared to traditional ceramic panels.
Elet.ca can develop custom shapes, sizes and resistan-ce levels based on specifi c technical requirements.
Corax® personal protection hard plates by Elet Ca use resistance compared to boron carbide plates up to lev
CORAX® PERSONAL PROTECTION HARD PLATES
CHARACTERISTICS IN COMBINATION WITH NIJ3A VEST
Standard size: 250 mm x 300 mm - Curve: single curve or multi-curve
LEVEL III LEVEL III+ LEVEL III++ LEVEL IV
Weight* 1.3 kg – 1.5 kg 1.6 kg – 1.9 kg 2.2 kg – 2.5 kg 2.4 kg – 2.9 kg
Thickness 18 – 22 mm 17 – 19 mm 17 – 19 mm 18 – 20 mm
FMJ 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80
AK 47 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS
MI93 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm
SS109 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm
AK 47 7.62 mm x 39 mm APIBZ 7.62 mm x 39 mm APIBZ
30.06 7.62 mm x 54 mm LPS 7.62 mm x 63 mm AP
DRAGUNOV 7.62 mm x 54 R API
CHARACTERISTICS AS STAND ALONE PLATE
Standard size: 250 mm x 300 mm - Curve: single curve or multi-curve
LEVEL III LEVEL III+ LEVEL III++ LEVEL IV
Weight* 1.5 kg – 1.7 kg 1.9 kg – 2.2 kg 2.5 kg – 2.8 kg 2.7 kg – 3.3 kg
Thickness 23 – 26 mm 20 – 24 mm 20 – 24 mm 22 – 25 mm
FMJ 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80
AK 47 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS
MI93 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm
SS109 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm
AK 47 7.62 mm x 39 mm APIBZ 7.62 mm x 39 mm APIBZ
30.06 7.62 mm x 54 mm LPS 7.62 mm x 63 mm AP
DRAGUNOV 7.62 mm x 54 R API
Note: panel weight varies according to the actual panel shape and to the customer’s specifi cations
Note: panel weight and thickness vary according to the actual panel shape and to the customer’s specifi cations
LEVELS OF PROTECTION TEST BULLET BULLET
WEIGHT g
BULLET VELOCITY±10 m/s2
Pistol and Revolver Threats
.22 caliber LR LRN 2.6 329
.380 ACP FMJ RN 6.2 322
9 mm Para FMJ RN 8.0 341
40 S&W FMJ 11.7 322
9 mm Para FMJ RN 8.0 367
.357 Magnum JSP 10.2 436
9 mm Para FMJ RN 8.0 436
.44 Magnum JHP 15.6 436
7.62x25 TT FSJ 5.5 440
Typical Rifl eThreats
7.62x51 NATO ball 9.6 838
7.62x39 AK-47 MSC 7.9 720
5.56x45 SS-109 4.0 950
Armor-piercing Threats
7.62x39 AK-47 API 7.7 720
7.62x51 NATO AP 9.8 830
7.62x54R API 10.4 845
.30 caliber M2 AP 10.8 869
TEST REPORT
NORM NIJ STD 01.01.04LEVEL IV
CORAX® PERSONAL PROTECTION HARD PLATES
SPECIAL COMPONENTS
Elet.Ca develops and manufactures, also based on custo-mer defi ned projects, any type of radomes, polarizers, co-vers and other technologically advanced equipment made of composite materials for civilian and military applications in the automotive, aerospace, naval and rail industries.
Elet.Ca composite materials are manufactured accor-ding to dedicated formulas in order to guarantee specifi c
properties of mechanical and thermal resistance, em-ploying several types of fi bres (carbon, aramide, silica, kevlar and others) and resins. Materials then go through internal product qualifi cation processes.
Elet.Ca production equipment include high-tech waterjet precision cutting, shaping and fi nishing tools for all cu-stom-design components.
10 cm10 cm
Elet.Ca reserves the right to modify product specifi cations without notice, for the purpose of operating needs or effi ciency improvements. According to applicable laws, any use of images, text and logotypes in this publication is forbidden.
EXAMPLES OF COMPOSITE MATERIAL COMPONENTS
ELET.CAvia Pistoiese, 155/A50058 Signa, Firenze - Italyphone +39 . 055 895 19 44fax +39 . 055 895 44 29
[email protected] www.eletca.itwww.marcegaglia.com
rev. 11-2013