Zg-3 Zero Gauss Chambers - EMI Electromagnetic Interference Shielding
Electromagnetic Interference EMI Electromagnetic Compatibility EMC
Transcript of Electromagnetic Interference EMI Electromagnetic Compatibility EMC
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
1/14
1
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology Electromagnetic Interference
(EMI) & ElectromagneticCompatibility (EMC)
Presented by
Devraj Sabat
EC200117322
Under the Guidance of
Mr. N. Srinivasu
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
2/14
2
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology AGENDA
EMI
SOURCES OF EMI
REDUCING EMI
EMC
EMC DESIGN CONSIDERATIONS EMC & EMI TESTING
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
3/14
3
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology INTRODUCTION
EMI-
It consists of any unwantedconducted or radiated signals of electric origin
that can cause degradation in system orequipment performance.
EMC-It is the ability of the system to function as
designed without any degradation inperformance due to EMI with in the operationalenvironment
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
4/14
4
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology
Classification of EMI
INTRASYSTEM EMI-
EMI problems with in the system one isdealing with.
INTERSYSTEM EMI-
EMI problems, that occur between two ormore systems.
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
5/14
5
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology EMI arises due to three basic
factors
Sources Transmission Path
Response
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
6/14
6
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology Sources of EMI
Natural EMI sources
Man made EMI sources
Broadband EMI sources
Narrowband EMI sources
Conducted EMI sources
Radiated EMI sources
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
7/14
7
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology
Reduction of EMI
Both Filtering & Shielding techniques are
used to reduce electromagneticdisturbances.
To reduce noise due to EMI at sources by
EMC oscillators.
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
8/14
8
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology Electromagnetic compatibility
(EMC)
First, EMC implies that the equipment will not
generate unacceptable interference emissionlevels which could cause interference .
Second, EMC implies that the equipment can
tolerate ambient levels of interference
without degradation of performance
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
9/14
9
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology
EMC Design considerations
Connectors
Grounding Shielding
Components
Electrostatic discharge
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
10/14
10
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology Testing
Low level testing-
Component, Equipment, Subsystem testing
Intermediate level testing- System testing
High level testing-
Electromagnetic environment with the test
item
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
11/14
11
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology Testing
Compliance tests-
Performed at the end of design.
Engineering tests- Deals with potential problems in the
designing process .
Audit tests-
It is associated with manufacturing & quality
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
12/14
12
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology Conclusion
EMI is a major problem in the development ofsystems.
EMC must be taken in to consideration during
the design stage. Environmental reliability testing is used to
eliminate potential problems
There are many EMC standards used in theregulation of products that may cause EMI.
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
13/14
13
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScience&T
echnology References
Electromagnetic Compatibility Design Guide forAvoinics and Related Ground SupportEquipment by AD NAVAIR.
Electromagnetic Compatibility, design
handbook series 1.0. A.A. Smith Jr., Coupling of Externalelectromagnetic fields to Transmission lines,John Willey & Sons.
www.google. Com Military specification, Electric Cable, Aerospace
vehicle, General specification for, MIL-C-7078,August 9, 1971.
-
7/28/2019 Electromagnetic Interference EMI Electromagnetic Compatibility EMC
14/14
14
Technical Seminar Presentation - 2004
Devraj SabatNationalInstitu
teofScienc
e&T
echnology