Electricity & Electronics LRes 0208

!!!!! Component level circuitconstruction

!!!!! Identification of individualcomponents

!!!!! Wide range of curriculumcoverage

!!!!! Analogue & Digital trainers

!!!!! Conventional instrumentsand PC basedinstrumentation options

!!!!! Hard copy or PC deliveredtuition

Electricity & Electronics


An understanding of Electricity and Electronics is a primary requirement inall branches of engineering and science education. A challenging andinteresting medium is required to hold the attention of students in such amulti-discipline area of study.

The wide range of work boards available from Feedback meets the majorityof needs in academic, vocational and industrial training establishments,and provide a hands-on approach.

Hardware is supported by comprehensive teaching manuals and, in manycases, detailed Discovery software for Computer Assisted Learning isavailable. Discovery courseware provides the student with on-screenassignments and PC based instrumentation when applicable.

The work boards can be used in two ways, depending on the methodologyrequired.

The use of conventional instruments oscilloscope, frequency and digitalmultimeters etc. in making measurements is of importance in the trainingof service technicians and engineers. The use of PC based instrumentationand courseware offers a reduction on lab requirements for conventional testequipment and is more suited to general electricity and electronic coursetraining needs.

Two types of work boards are available, one that requires the circuit to beconstructed by the student from discrete components mounted on pin carriersand the other that has pre-mounted components required for a specific areaof study.

Curriculum coverage!!!!! Analogue & Digital

systems

!!!!! Electrotechnology

!!!!! Electromagnetism

!!!!! Semiconductor devices

!!!!! Operational amplifiersand circuit applications

!!!!! Circuit fault finding andservicing

!!!!! Combinational andsequential logic

!!!!! Microprocessors andProgrammable Logic

!!!!! PC programmingapplications

!!!!! PIC programmingapplications

Discovery Courseware

Console 92-300-1 & Discovery coursewarein use

Discovery patching diagram

Discovery courseware presentation

Discovery Courseware

Features

! Common curriculum deliverymedium

!!!!! Controlled learningenvironment

!!!!! Browser-based curriculum

!!!!! Self-paced learning

!!!!! Embedded VirtualInstrumentation

System Benefits

!!!!! Classroom sets coursescan be easily re-organised

!!!!! PC based instrumentationreduces the requirement forconventional instruments

!!!!! Uniform hardware & softwaredelivery platform

!!!!! Step-by-step Discoveryinstructed courseware reducesinstructor time

Discovery software is Feedbacks continuously evolving software package thatis used to develop the Discovery Courseware.Discovery courseware presents on-screen student assignments that guide thestudent through the practical exercises and provide the theory for the subjectbeing studied. The software also provides a PC based instrument toolbox thatis made available for specific products which need the use of measuringinstruments, such as an oscilloscope, digital voltmeter, frequency meter andspectrum analyser. The instrument toolbox can be launched by the studentwhen instructed to do so from the course instructions.To obtain the full benefit of Discovery courseware the Teknikit Console 92-300-1 is required. The console provides power supplies for the various workboards and two BNC inputs conveniently positioned near the consoles upperedge for the PC based instrumentation.The Teknikit console is a robust bench-top unit that provides a platform for bothtypes of work-boards; either self-constructed circuits or pre-mounted types.

Teknikit Console 92-300-1 shown withworkboard

Discovery PC-based instrumentationoscilloscope (available when usingthe 92-300-1 console)

Electricity & ElectronicsFeatures! Choice of training method-

ology - Conventional orVirtual instrumentation

! Identification of individualcomponents

! Choice of power supplyoptions

! Fully protected supplyoutputs

! Mixed work board (A and B)student stations possible


The range of work boards detailed in this section of the brochure fall intotwo categories:

A. Self construction circuit trainers EEC470 seriesThese trainers consist of discrete components mounted on small printedcircuit carriers, which vary, depending on the mounted component, from 2-pindevices through to 16-pin integrated circuits. Power semi-conductorcomponents, in many circumstances, are mounted on plug-in heat sinks.Other large components and assemblies have metal or large PCB carriers.This series of products is used with the Electricity & Electronics ConstructorDeck EEC470. The carrier-mounted components are plugged into the decksspring contact matrix to build the circuit to be investigated.

B. Pre-mounted circuit trainers OAT343 through to 13 series productsThese trainers have pre-mounted components on the circuit boards,conveniently laid out in a circuit format that requires the minimum amountof interconnection. There is very little preparation required by the student tostart the assignments, which leaves maximum time for investigation of theassignment objectives.Both categories of work boards require an external power supply that canbe provided by one of three options:1. Bench top mounted open printed circuit board unit, model number 92-445.

Ideal for use when training is required with conventional instrumentation.

2. Bench top mounted Teknikit console, model number 92-300.This model can be upgraded to the same specification as the 92-300-1to include the Virtual Instrumentation.

3. Bench top mounted Teknikit console, model number 92-300-1.In addition to the required power supplies this unit has inputs for virtualinstrumentation that in-conjunction with Discovery courseware providesa range of virtual test instruments.

System Benefits! All necessary power

supplies provided

! Low cost power supplyoption

! Can be used with owninstrumentation

! Virtual instruments option

! Additional work boards canbe added at a later date

! Common delivery platformoptions

Electricity and Electronics ConstructorDeck EEC470

ac/dc Comprehensive Power Supply92-445

Amplifiers & Electronic Circuit Applications EEC473-4

EEC470 SeriesSelf-construction Trainers

Basic Electricity & Electronics EEC471-2The EEC471-2 componentsare used to construct circuitson the EEC470 deck (see backpage), and introduce thestudent to basic principles ofelectrical & electronic theoryand circuits.

Curriculum Coverage!!!!! Resistance!!!!! Resistor networks!!!!! Resistors in series & parallel!!!!! Superposition theorem!!!!! Thvenins theorem!!!!! Power!!!!! Capacitance!!!!! Capacitors in series & parallel!!!!! Time constant!!!!! Electromagnetic induction!!!!! Inductance!!!!! RMS value of an ac waveform!!!!! Resistance in ac circuits!!!!! Capacitance in ac circuits!!!!! Inductance in ac circuits!!!!! Capacitive reactance!!!!! Inductive reactance!!!!! The series CR circuit!!!!! The series LR circuit

!!!!! Impedance of a series CR circuit!!!!! Impedance of a series LR circuit!!!!! Impedance of a series LCR circuit!!!!! Parallel impedances!!!!! Power in ac circuits!!!!! Series resonance!!!!! Parallel resonance!!!!! The Transformer!!!!! The semiconductor diode!!!!! Half-wave rectification!!!!! Full-wave rectification!!!!! The zener diode!!!!! Transistor familiarisation!!!!! The common-emitter transistor circuit!!!!! The silicon controlled rectifier (SCR)!!!!! The TRIAC!!!!! Trigger devices the DIAC and UJT!!!!! The field effect transistor

12-901 covers the curriculum for the EEC471-2.

The EEC473-4 componentsare used to construct circuitson the EEC470 deck and coverAmplifiers and Electroniccircuit applications theoryand circuits.

Curriculum Coverage!!!!! Using electronic amplifiers!!!!! dc gain!!!!! ac gain!!!!! Amplitude distortion!!!!! Frequency and phase distortion!!!!! Negative feedback!!!!! Frequency response!!!!! The ac amplifier!!!!! The operational amplifier!!!!! Push-pull amplifiers!!!!! Passive attenuators!!!!! Applications!!!!! Common-emitter amplifier!!!!! Emitter follower

!!!!! Complementary push-pull!!!!! Amplifier!!!!! Differential amplifier!!!!! Operational amplifier!!!!! Astable multivibrator!!!!! Phase-shift oscillator!!!!! The Schmitt trigger!!!!! Voltage regulator!!!!! TTL NAND gate!!!!! Exclusive-OR gate!!!!! Set-reset flip-flop!!!!! D flip-flop!!!!! Clocked SR flip-flop!!!!! J-K flip-flop

DiscoveryCourseware

12-902 covers the curriculum for the EEC473-4.DiscoveryCourseware

Electronic Control of Machines EEC476

EEC470 SeriesSelf-construction Trainers

Power Supply Design EEC475Curriculum Coverage!!!!! Rectification

Rectifier & Transformer Measure-ment of Voltages

!!!!! Capacitive filtersVoltage and current waveformswith or without reservoir capacitorFactors effecting ripple voltage

!!!!! Voltage doublersHalf wave voltage doublerFull wave voltage doubler

!!!!! Simple voltage stabilisersZener diode stabiliser characteristicsMeasurement of Ro, regulationand efficiency

!!!!! Circuit protectionCurrent limitingCurrent fold-backOver-voltage protection by crowbar

!!!!! Variable dc suppliesVariation of regulated outputRegulation measurementPerformance of a Feedback regulator

!!!!! Integrated circuit voltage regulatorRegulator operationObservation of thermal shutdown

!!!!! Inverters and Converters!!!!! Switch-mode regulator

Observing a switching waveformMeasurementCalculation of output voltageEfficiencySwitching frequency

The EEC475 is used in con-junction with the EEC470 deckto provide a course of studycovering a variety of differ-ent types of Power Supply.The hardware comprises acomponent storage boardcontaining an assortmentof passive and active com-ponents. The comprehensivecourseware coversfamiliarisation, theory,objectives, procedure andtypical experimental results.

The EEC476 for use with theEEC470 deck covers a widerange of power relatedsubjects, dealing withsemiconductor device charac-teristics, theory of operationand a wide range of powerrelated applications.

Curriculum Coverage!!!!! Characteristics and operation of

the power MOSFET!!!!! Silicon controlled rectifier (SCR)

dc characteristicsFoward and Reverse

!!!!! The unijunction transistorZener diode stabilisercharacteristicsUJT switching actionUJT relaxation oscillatorPhase controlled UJT oscillator

!!!!! SCR circuits with resistive andcomplex loads

Phase angle controlPhase control of inductive loadEffect of the flywheel diode

!!!!! Characteristics of the TRIACBlocking characteristic, positiveand negative

!!!!! Speed measurement methodsIncremental encoder calibrationTachogenerator calibrationProcedure

!!!!! Frequency to voltage conversionElectronic Tachogenerator calibration

!!!!! Phase angle control of a dc motorSpeed control of a dc motorSpeed and torque of a dc motor

!!!!! Feedback control of a dc motorLinearity of speed controlSpeed-torque characteristic

!!!!! Pulse Width ModulationPulse width control of power on-load

!!!!! Pulse Width Modulation Controlof a dc Motor

PWM control of a dc motorClosed loop PWM control of a dcmotor

Opto-Electronics EEC477

Operational Amplifier Tutor OAT343

Open boardSelf-construction &Pre-mounted trainers

Curriculum Coverage!!!!! Characteristics of a LED

Multi colour and sensitive types

!!!!! Series and parallel connected LEDsac supply for LEDs

!!!!! Two colour FlasherPulsed LED supply

!!!!! Filament lamp characteristicsDynamic behaviour

!!!!! Photo detectorsCds photo-resistor, photo diode, photo transistor

!!!!! Diode and transistor opto-couplers!!!!! Application circuits

Light activated switch with an operational amplifierLight activated switch with two transistors

Opto-Electronic devices arewidely used in digitalcommunications and analoguesystems. The trainer providesthe study of a wide range oftypical opto-electronic emittersand detectors covering theircharacteristics and circuitrequirements. The individualcircuits are assembled on theEEC470 construction deck.

This component level boardfeatures four operationalamplifier circuits - one ofthese circuits is constructedcompletely with discretecomponents, enabling detailedinvestigations to be carriedout on the circuit operation.

Curriculum Coverage

!!!!! Op-Amp Feedback Requirements!!!!! Input Offset Voltage!!!!! Slew Rate!!!!! Frequency Response!!!!! Common Mode Rejection Ratio!!!!! Operational Amplifier Characteristics!!!!! Inverting and Non-Inverting Modes!!!!! Open-loop Voltage Gain!!!!! CMRR!!!!! Sign Changer or Inverter!!!!! Scale Changer!!!!! Summing Amplifier!!!!! dc Voltage Follower!!!!! Differential dc Amplifier!!!!! Analogue Integration & Differentiation!!!!! Linear and Non-Linear Oscillators

12-910 covers the curriculum for the OAT343.DiscoveryCourseware

Logic Tutor LT345 Mk II

Electromagnetism Trainer 12-100

Open BoardPre-mounted Trainers

Curriculum Coverage!!!!! RMS value of an ac waveform!!!!! Power at ac!!!!! Electromagnetic induction!!!!! Inductance!!!!! Inductive circuit at ac!!!!! Inductive reactance!!!!! Series resonance!!!!! Parallel resonance!!!!! The Transformer!!!!! Magnetic circuits & materials!!!!! Magnetic reed switches!!!!! Relays!!!!! Latched relay motor control!!!!! dc motor characteristics!!!!! dc generator

The Electromagnetism Trainerprovides an introduction to theapplication of magnetic fieldsthrough the use of variouscomponents and materials.The practical exercises covermany of the topics required tobe addressed in this subjectarea that appear in coursecurriculum for electricity andelectronics study.

A component-level boardfeaturing a range of comm-ercial integrated circuitscontaining various basic logicgates that can be inter-connected to form combina-tional and sequential digitalcircuits. Included on the boardare input switches LEDs anda seven segment alpha-numeric display.

Curriculum Coverage!!!!! Binary Numbers Basic!!!!! Logic Operations!!!!! Combinational Logic!!!!! Karnaugh Maps!!!!! The Simple Latch!!!!! Clocked Flip-Flops!!!!! The JK Flip-Flop!!!!! Equivalence!!!!! Non-equivalence and other circuits!!!!! Binary Addition!!!!! Registers!!!!! Synchronous Counters!!!!! Asynchronous Counters!!!!! Codes & Code Converters!!!!! 7-Segment Display

12-911 covers the curriculum for the 12-100.DiscoveryCourseware

21-905 covers the curriculum for the LT345 MkII.DiscoveryCourseware


Digital Systems

Advanced Logic Trainer CK341The CK341 is a versatile andeasy to use trainer that allowsrapid construction of digitalcircuits using integrateddevices that are convenientlypackaged in large plug-inmodules. Each module has amimic of the integrated circuitthat it contains. Analoguecircuits can also be used toconstruct hybrid circuits.

Analogue & Digital Trainer CK342

Curriculum Coverage

!!!!! Binary Numbers!!!!! Basic Logic Operations!!!!! Combinational Logic!!!!! Karnaugh Maps!!!!! The Simple Latch!!!!! Clocked Flip-Flops!!!!! The JK Flip-Flop!!!!! Equivalence!!!!! Non-equivalence and other circuits!!!!! Binary Addition!!!!! Registers!!!!! Synchronous Counters!!!!! Asynchronous Counters!!!!! Codes & Code Converters!!!!! 7-Segment Display

Two component-level boardscontinue the study of logiccircuits up to microprocessorsystems and use a rangeof medium scale integrationdevices.CK342A covers digital devicesand CK342B explores Analogueto Digital & Digital to Analogueconversion.CK342A can be used on itsown, but CK342B must be usedin conjunction with CK342A.

Curriculum CoverageDigital Systems Trainer (CK342A)!!!!! Registers!!!!! Counters!!!!! The Arithmetic Unit ALU!!!!! Addition Seven Subtraction!!!!! Data Storage and Retrieval!!!!! Fetching an Instruction and its Operand

Analogue Systems Trainer (CK342B)!!!!! D to A Conversion DAC!!!!! DAC using Analogue Switch!!!!! DAC based on R-2R Network!!!!! Monolithic DAC!!!!! A to D Conversion ADC!!!!! Integrating ADC!!!!! Sample & Hold

For CK342A, curriculum software is 21-901and for CK342Bcurriculum software is 21-902.

DiscoveryCourseware

The CK342A & B are available together as CK342.Discovery courseware for this product should be ordered separately.

Applications with Fault Finding & Electronic Servicing


Curriculum Coverage

Applications with Fault Finding13-2018 plug-in boards covering 8 singlecircuits:!!!!! Diode Circuits!!!!! Regulated Power Supply Circuits!!!!! Transistor Amplifier!!!!! Two stage Amplifier with overall

feedback!!!!! Light Emitting Diode flasher!!!!! Digital to Analogue converter!!!!! Logic Interface!!!!! Waveform GeneratorFault Combinations!!!!! Short circuit!!!!! Open circuit!!!!! Reverse connection!!!!! Incorrect value component!!!!! Incorrect component

Electronic Servicing 13-2029 dual-circuit and 1 single circuitplug-in boards covering 19 individualcircuits:!!!!! Bridge Rectifier with smoothing!!!!! Bridge Rectifier with series

regulator!!!!! Single Stage Audio Amplifier!!!!! FET Single Stage Audio Amplifier!!!!! Op-amp Integrator!!!!! Differential Amplifier!!!!! 555 Timer!!!!! Schmitt Trigger!!!!! Unijunction Transistor Oscillator!!!!! Astable Multivibrator!!!!! Monostable Multivibrator!!!!! Crystal Oscillator!!!!! RC Phase Shift Oscillator!!!!! Colpitts Oscillator!!!!! Combination Logic Circuit - 1!!!!! Combination Logic Circuit - 2!!!!! Asynchronous Counter!!!!! Shift RegisterSingle circuit board!!!!! Synchronous Counter

The range of electronic circuitsis supplied as two sets ofboards: Fault Finding (13-201)and Electronic Servicing(13-202). Each requires theApplications Console (13-107)& a Teknikit Console (92-300-1),which provide built-in powersupplies and VirtualInstrumentation softwareinstruments.Alternatively, the board setscan be used with conventionaltest instruments and powersupplies from either the 92-300console, or the 92-445 openboard power supply.

The two options available offerthe use of either virtual, orconventional instrumentation.The choice will depend on theteaching methodologyrequired. The virtual instru-mentation route offersconsistency and repeatabilityin training and a reduction ininstrumentation cost, whilstthe use of conventionalinstruments provides a moretraditional feel.The 92-445 power supply is recommended for use with either of the above

options where the Teknikit Console has not been selected.

Applications Console 13-107

Teknikit Console 92-300-1 shown withApplications Console 13-107, with oneof the ten Electronic Servicingmodules from the 13-202 in postion

Fault Finding

CONVENTIONALINSTRUMENTATION

13-901Discovery II softwarefor Applications with

Fault Finding

VIRTUALINSTRUMENTATION

13-903-USBDiscovery II softwarefor Applications with

Fault Finding

TeknikitConsole92-300-1

PowerSupply

!

!

!

!

Applications with FaultFinding - 8 plug-in boardsfor 8 single circuits.

13-201

!

13-107Applications

Console

Electronic Circuit Applications

!

!

!

Electronic Servicing with9 dual circuit & 1 singlecircuit plug-in boards.

13-202

CONVENTIONALINSTRUMENTATION

13-902Discovery II software

for ElectronicServicing

VIRTUALINSTRUMENTATION

13-904-USBDiscovery II software

for ElectronicServicing

Electronic ServicingElectronic Circuit Applications

TeknikitConsole92-300-1

PowerSupply

!!

13-107Applications

Console


Microprocessor Trainers

Applications Board 24-200A range of microprocessors, microcontrollers and programmable logic modules isavailable which are used primarily with the Applications Board 24-200.It is recommended that the 24-200 be used with the trainers if the coursewareprovided with each trainer is to be followed.The controllers have a common I/O bus and are supported by a range of cross-development, assembly language, software packages working from the host PC.All communication software operates with Windows 98, XP and NT.

Curriculum Coverage!!!!! Outputting data!!!!! Inputting data!!!!! Inputting & outputting data!!!!! Subroutines & delays!!!!! The digital to analogue conversion

(DAC)!!!!! Analogue to digital conversion (ADC)!!!!! Successive approximation ADC!!!!! Seven segment display

!!!!! Multiplexing seven segment display!!!!! Scanning the keypad!!!!! Control of a dc motor!!!!! dc motor speed control!!!!! dc motor speed control with IR sensor!!!!! Temperature control!!!!! Fibre optic link

Applications Board 24-200 I/O

Inputs

!!!!! Optical fibre receiver!!!!! 8-bit digital switch bank!!!!! Numerical keypad!!!!! Optical speed & position sensor!!!!! Temperature sensor!!!!! Slide potentiometer!!!!! External analogue input

Outputs

!!!!! Optical fibre transmitter!!!!! dc motor!!!!! 8 LEDs!!!!! Heater!!!!! 2 dual segment displays!!!!! Analogue output!!!!! Speaker

The Stepper Motor Module 24-201 plugs into the Applications Board via aribbon cable to port 3, and requires the driver IC supplied, to be inserted in theappropriate socket on the 24-200 board before testing of programs can begin.The Stepper Motor is mounted on a panel marked with 30 degree incrementsand is fitted with a pointer that can be removed so that the output shaft can beconnected to an application if desired. Exercises involving forward, reverse andstep rate can be implemented, and also routines that involve a combination ofthese movements.

The Liquid Crystal Display Module 24-202 provides extensive programmingpossibilities in the use of this type of display for announcements and warningmessages, as used on small instruments or large public displays such as thosefound at stations and airports etc. The techniques for rolling, flashing oralternating messages can be practised.

This is a highly versatile board,compatible with all our microtrainer hardware or a PC.It is ideal for teaching thebasics of microprocessorprogramming and applicationssuch as decision making,D/A and A/D conversion, openand closed-loop control, delayloops, sub-routines & eventcounting.It covers the techniques ofmicro control of delay loops,sub-routines & event counting.Fibre optics, keyboard entry,digital sound production, dcmotor control, infra-redsensing, heating and coolingand visual displays.Optional applications asextensions to the 24-200 areavailable Stepper Motor24-201 and Liquid CrystalDisplay 24-202.

Applications Board 24-200

Stepper Motor Module 24-201

Liquid Crystal Display Module 24-202

68HC11 Micro-controller Trainer 24-102


Digital Systems

The 24-102 is a comprehensive single board computer, based on theMotorola MC68HC11 micro-controller unit (MCU). The unit may be used asa development system or trainer.A suitable dc power supply and comprehensive user manual is supplied.It is recommended that the Applications Board 24-200 be used with thisproduct to fully utilise the exercises provided in the accompanying studentsmanual.

ProgrammingA ROM-resident monitor allows user programs to be assembled quickly on aline-by-line basis, then run and debugged. More advanced programs may beassembled on the host PC using the cross-development software 24-904.The assembled code may then be downloaded, run and debugged.A serial cable and power supply is supplied with the Trainer.

To operate the 24-102 a PC is required that runs an operating system ofWIN 95 or higher.

Features! 2MHz MCU! 256 bytes of RAM

! RS232 serial communications! Two input/output ports! 8k monitor program-ROM! Hardware reset button! Register contents can be

viewed and modified

! Debugging facility! Hexadecimal number

handling

The highly flexible 8051 single board computer, based on the AtmelAT89C51ED2. In System Programmable member of the MCS51 family of micro-controllers,can be used as an educational trainer or target board.User and experiment manuals are supplied.This product is compatible with the Applications Board 24-200 and the 8051cross-assembler 24-946.It is recommended that the Applications Board 24-200 be used with this productto fully utilise the exercises provided in the accompanying students manual.

8051 Microcontroller Development & Training System 24-104Features! Operates up to 33MHz! 64K bytes of Flash memory! 1K x 8 bit RAM

! Programmable UART serialport

! 32 programmable I/O lines! Full debug facilities! Single step facility! Memory view/alter facility! On-screen help! Trace facility

ProgrammingUsing the PC serial port, lntel Hex format programs are entered directly intothe Windows based Cross-assembler, Disassembled & debugged with thepowerful Monitor facilities. Register contents can be displayed on the screen.The monitor software may be integrated into user code for flexible codedevelopment. Programs can be developed in high level languages, compiledand then assembled into Intel Hex format.


Z80 Microprocessor Trainer 24-121

8086 Microprocessor Development & Training System 24-131


Digital Systems

Features! 1.79MHz processor speed! RS232 serial communications! I/O lines on IDC connectors! 8K static RAM! 8K EPROM based monitor! Interrupt control of

peripherals

! Line-by-line assembler! Single step facility

The 24-121 is a comprehensive computer board based on the 8-bit Z80microprocessor. The board may be used as a development system forAssembler and Machine Code programs.The EPROM based monitor provides a user interface to any standard PC viaa serial port. A comprehensive user and experiment manual is supplied.Cross-assembler 24-922 and applications boards are also available.It is recommended that the Applications Board 24-200 be used with this productto fully utilise the exercises provided in the accompanying students manual.

ProgrammingPrograms are entered directly into memory in Hexadecimal format ordownloaded from the host in Intel Hex format. A clear graphical displayenables line-by-line assembler programs to be entered and disassembled.Powerful monitor facilities enable programs to be debugged easily, displayregister contents on screen and give direct access to cross-developmentsoftware. On-board static ROM and EPROM are provided.


The 24-131 is designed as a general purpose unit that simplifies the teachingof the 8086 CPU and its commonly used peripherals.The 8086 16-bit microprocessor and a set of associated peripheral devices arefitted to this computer board and it is supplied complete with an on boardEPROM based complete monitor.Driven from a PC serial port, this product is compatible with the 8086 assembler24-945 and the Applications Board 24-200.User and experiment manuals are supplied along with a suitable dc power supply.It is recommended that the Applications Board 24-200 be used with this productto fully utilise the exercises provided in the accompanying students manual.

ProgrammingAssembler code programs can be entered into the integral LINE-by-LINEassembler, Disassembled and debugged with the powerful MONITOR facilities.LINE-assembled programs can also be saved and reloaded, when required.Both Register and Memory contents can be displayed on the screen in theirown windows and a Watch Window enables specific selected memory locationsto be monitored.


Features! 4.9 MHz processor speed! RS232 serial communications

! 2 x 16 bit programmable I/Oports

! 8 levels of interrupts! On-board hardware reset! Windows monitor software! Examine/Alter memory and

register

! Single step function! Memory block display! Port in/out display function

68000 Microprocessor Trainer 24-141


Digital Systems

Programmable Logic Development & Training System 28-107

Features! 8MHz processor! 64K bytes of RAM & ROM! 16-bit wide data bus! 16-bit bases accessible! RAM & ROM expandable! EEPROM based monitor! Line-by-line assembler! Registers inspected/mod-

ified! View each step with trace

function! Standard uploading format

Based on the MC68000 16-bit microprocessor, this is a complete computersuitable for many stand-alone applications, especially for real-time control,where power and speed are important. It is supplied with comprehensiveEPROM based monitor, line-by-line assembler programs and PC compatiblecommunications software. User and experiment manuals are supplied.Cross-assembler 24-944 and applications boards are also available.This Trainer is a versatile design and evaluation tool for Education andTraining purposes, with full access given to Data and Address buses,enabling logic analysers and other diagnostic equipment to be connected fordemonstration and debugging. On-board 16-bit wide static RAM & EPROMare provided with expansion facilities and extensive serial & parallel I/Ohardware. A serial cable and suitable power supply is supplied with theTrainer.It is recommended that the Applications Board 24-200 be used with thisproduct to fully utilise the exercises provided in the accompanying studentsmanual.


A low cost introduction to in system PLD programming and application.This board comes with design software and is fitted with the powerful LatticeispLSI2032E PLD. Comprehensive user and experiment/tutorial manualsare also supplied. Connects to a PC via a parallel port. Applications boardsare also available.It is recommended that the Applications Board 24-200 be used with thisproduct to fully utilise the exercises provided in the accompanying studentsmanual.

ProgrammingPrograms are developed on a PC and downloaded into an In systemprogrammable (ISP) device. Devices may be repeatedly programmed withoutremoval from the hardware. LATTICE ISP Design Expert Starter Software issupplied, including ISP Encyclopaedia, applications notes, Design techniques,lattice data book and ISP development and download software. The hardwareis also compatible with the LATTICE ISP Design Expert Software Pack.


Features! In system programmable

device

! Uses Lattice Synario startersoftware

! Programmable using PCparallel port

! Input/output connectorprovided for externalapplications

PIC Development & Training System 28-122


Digital Systems

PC Applications Training System 25-151-USB

Features! 10MHz controller speed

! RS232 serial communications

! 8K (14-bit) FLASH programmemory

! 8 x 10-bit analogue inputchannels

! In-circuit debugging

! MPLAB PC programs sentdirect to PIC device

! Source code viewable whenloaded for programming

Programmable Interface Controllers (PICs) are a family of low cost ReductionInstruction Set Computer (RISC) micro-controllers that are powerful and easyto use.The 28-122, is based on the versatile microchip PIC16F877 CMOS FLASHdevice in a 44 pin PLCC and has in-circuit debugging. It can be used for variousapplications; as a target board or for educational purposes. It can also be usedas a stand-alone via a serial port to a PC, allowing easy downloads of controlcode, developed using Microchips MPLAB software or high level languagedevelopment software.The system is capable of running at clock speeds of 20MHz or above. Thesedevices are based on the Harvard architecture of separate program and datastorage areas and are self contained systems providing on-chip RAM orFLASH RAM (program area) and I/O.The 28-122 is supplied with a suitable dc power supply, software CD, hard copymanual, and CD manual.It is recommended that the Applications Board 24-200 be used with this productto fully utilise the exercises provided in the accompanying students manual.


Features (24-200)! Wide range of components

available! dc motor with speed and

position sensor! Numerical keypad! Temperature sensor! Resistive slide potentiometer! Optical fibre transmitter and

receiver! 2 x dual seven segment

display! Electrical heater! Audio speaker

The PC Applications Training System is for demonstrating the use of a PC asa means of controlling an external application (24-200) via a USB port.Supplied as part of the system is a digital I/O adaptor board that connectsbetween the 24-200 Applications Board and a USB to 24 I/O board, alsosupplied. This connects the 24-200 to the PC USB port.

USB to 24 I/OBoard Digital

I/O USBModule

Digital I/OAdaptorBoard

DIO-ADP1

PC USBconnection

Power SupplyInput

ApplicationsBoard24-200

The options of a Stepper Motor 24-201 and Liquid Crystal Display 24-202 arealso available to plug into the Applications board.The Digital Input/Output USB package 24-205 (consisting of the DIO-ADP1adaptor and the Digital I/O USB module) may be purchased separately forcustomers already owning the Applications board 24-200.

ARM7SC Development & Training System 24-160 & 24-161


Digital Systems

Features! ARM7S 32/16-bit micro-

controller

! De-bug hardware & software! Full accsess to controllers

ports! USB or RS232 Serial port

connectivity

! 8 channels of 10-bit ADC! Advanced interrupt con-

troller

! Comprehensive trainingsystem (24-160)

! Development and testingof ARM7 programs

! Can be used withApplications Board 24-200

! Available as a minimal costsystem (24-161)

! Students exercise and usermanuals on hard copy andCD ROM

! dc power supply included

The continuing evolvement of micro-controllers to fulfil the ever increasingdemand for greater speed and processing power, at a reasonable cost, hasled in industry to the widely adopted ARM range of micro-controllers.The ARM7S is based on the Atmel range of micro-controllers with highperformance 32-bit RISC architecture and high density 16-bit instruction setwith real-time emulation and embedded trace support, which combinemicro-controller with embedded high-speed flash memory.Designed for educational and training purposes the ARM7S Developmentand Training System provides the opportunity to learn about this range ofmicro-controllers and the development of programs applied to a wide rangeof applications using the Applications Board 24-200.The training system is available in two versions. The 24-160 that comprisesthe ARM7 target board, C development software, Jtag debug hardware toplug into the target board, dc power supply, students exercise and usermanual.The second version, 24-161, comprises the ARM7 Target board, dc powersupply, students and user manual for those wishing to use their owndevelopment software.It is recommended that the Applications Board 24-200 be used with thisproduct to fully utilise the exercises provided in the accompanying studentsmanual.

ARM7 Target Board Specification AT91SAM7S128 Atmel micro-controller 128K Bytes of In-System Re-programmable downloadable FLASH memory 32K Bytes SRAM 8 channels of 10-bit ADC USB 2.0 Full Speed Device Port 2 Enhanced USARTs SPI, SSC & TWI USART/DBGU interface Simple and automatic program download (ISP) via RS232 connection All controller connections accessed via an IDC connector for external

processor bus examination Programmable UART serial port (via external 9-way D-type connector)

buffered by line receiver/driver Power On LED Can be powered via the USB connector Up to 32 Programmable Input/Output lines accessible via IDC headers

(3 lines allocated for in service programming) Input/Output connections compatible with a range of Applications products

(via 40-way header) Advanced Interrupt Controller (8 level priority) 2 wire UART & Support for Debug Communication Channel interrupt 20-bit Programmable Counter and 12-bit interval counter (PIT) 12-bit Programmable Windowed Watchdog Timer (WDT) providing reset

and interrupt signals 3 x 16-bit timer Hardware reset button

To operate the 24-160 and 24-161 a PC is required that runs an operatingsystem of WIN 2000 or higher.

ARM7S Target board

Feedback Instruments LimitedPark Road, Crowborough, E. Sussex,TN6 2QR, England.Telephone: +44 (0) 1892 653322Fax: +44 (0) 1892 663719E mail: [email protected]: www.fbk.com

Electricity & Electronics - 0108-1Printed in England

Registered in England number 990620.A subsidiary of Feedback plc.

Feedback reserves the right to changethese specifications without notice.

Feedback Incorporated437 Dimmocks Mill Road, Suite 27,Hillsborough, NC 27278, USATelephone: (919) 644 6466Fax: (919) 644 6470E-mail: [email protected]: www.fbk.com

Ordering InformationConsoles, Power Supplies & AccessoriesTeknikit Console (with power supply only) 92-300Teknikit Console with power supply, Virtual Instrumentation interface & software 92-300-1ac/dc Comprehensive Power Supply 92-445dc Power Supply 01-100Electricity & Electronics Circuit Constructor Deck ECC470Applications Console 13-107System Storage Rack (for storage of 470 series, OAT343, 12-100, LT345,CK341/342 & Applications Console 13-107) SSR1000Blank component carriers for use with ECC470 Construction Deck EEC470-001Microprocessor Applications Board 24-200

Electricity & ElectronicsBasic Electricity and Electronics (for use with EEC470) EEC471-2Discovery for Basic Electricity & Electronics ECC471-2 12-901Amplifiers & Electronic Circuit Applications (for use with EEC470) EEC473-4Discovery for Amplifiers & Electronic Circuit Application EEC473-4 12-902Power Supply Design (for use with EEC470) EEC475Electronic Control of Machines (for use with EEC470) EEC476Opto-Electronic (for use with EEC470) EE477Operational Amplifier Tutor (requires 01-100) OAT343Electromagnetism Trainer (requires 01-100) 12-100Discovery for Electromagnetism Trainer 12-100 12-911Logic Tutor (requires 01-100) LT345 MKIIDiscovery for Logic Tutor LT345 21-905Advanced Logic Trainer (requires 01-100) CK341Analogue & Digital Trainer (requires 01-100) CK342Digital Systems Trainer (requires 01-100) CK342ADiscovery for Digital Systems CK342A 21-905Analogue Systems Trainer (requires 01-100) CK342BDiscovery for Analogue Systems CK342B 21-902Fault Finding Applications Mother Board (requires Power Supply such as 92-445) 13-107Circuit Applications & Fault Finding Boards (for use with 13-107) 13-201Discovery for Applications with Fault Finding 13-901Discovery for Applications with Fault Finding with Virtual Instruments 13-903-USBElectronic Servicing Boards (for use with 13-107) 13-202Discovery for Electronic Servicing 13-902Discovery for Electronic Servicing with Virtual Instruments 13-904-USBMicroprocessors TrainersApplications Board 24-20068HC11 Micro-controller Trainer (for use with 24-200) 24-10268HC11 Cross Assembler Software (Single User 32 bit/WIN/NT) 24-90480C51 Micro-controller Development & Training System (for use with 24-200) 24-1048051 Cross Assembler for 24-104 (Single User 32 bit/WIN/NT) 24-946Z80 Microprocessor Trainer (for use with 24-200) 24-121Z80 Cross Assembler for 24-120 or 24-121 (Single User 32 bit/WIN/NT) 24-9228086 Microprocessor Development & Training System (for use with 24-200) 24-1318086 Cross Assembler for 24-131 (Single User 32 bit/WIN/NT) 24-94568000 Microprocessor Trainer (for use with 24-200) 24-14168000 Cross Assembler for 24-140 or 24-141 (Single User 32 bit/WIN/NT) 24-944Programmable Logic Development (PLD) & Training System (for use with 24-200) 28-107PIC Development & Training System (for use with 24-200) 28-122PC Applications (includes 24-200) 25-151-USBARM7SC Development & Training System (for use with 24-200) 24-160ARM7S Target Board (for use with 24-200) 24-161Accessories for Microprocessors TrainersStepper Motor module accessory for Applications Board 24-200 24-201Liquid Display module accessory for Applications Board 24-200 24-202Upgrade Pack for 24-200 to USB 24-205

Note: For multi-user versions of the Microprocessor Trainers Cross Assemblers, contact theSales Department.


dc Power Supply 01-100

System Storage Rack SSR1000

Electricity & Electronics LRes 0208

Documents

Transcript of Electricity & Electronics LRes 0208