EKL Katalog 2011
description
Transcript of EKL Katalog 2011
-
Khler
Heatsink
Hhe
Total heigh
21510121073
Native GP/DFr922512CD-007
Hydraulik Lager
92x25 mm, 900 - 1.800 U/min
Native GP/DFr922512CD-007
Hydraulic Bearing
92x25 mm, 900 - 1.800 rpm
Radial
Al63,5 x
Schrauben
mit Federn &
Backplate
Screws with
springs &
backplate
Khler
Heatsink
Hhe
Total heigh
21510021036
Everflow R127015DUAF78306
Doppelkugellager
70x70x15 mm, 600 - 5.100 U/min
Everflow R127015DUAF78306
2 Ball Bearings
70x70x15 mm, 600 - 5.100 rpm
89 x 81
Cu, Al
2 heat-
pipes
75,5 x
Schrauben
mit Federn &
Backplate
Screws with
springs &
backplate
Intel CoreTM2 Extreme X6800 (2.93 GHz, 65 nm)*
Lfter
Fan
Abbildungen hnlich / Illustrations similarly
Intel Celeron 440 (2GHz, 65nm)*
Abmessungen(mm)
Dimenions(mm)
Abmessungen(mm)
Dimenions(mm)
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
IntelPentium 4 Prescott 540/541/640 (3.2 GHz, 90nm)*
IntelPentium 4 Cedar Mill 661 (3.6 GHz, 65nm)*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Intel CoreTM 2 Duo E6700 (2.66 GHz, 65nm)*
*Siehe Seite 4
Befestigung
Mounting
Intel Pentium Dualcore E2200 (2.2 GHZ, 65nm)*
Intel CoreTM2 Duo E8500 (3.16 GHz, 45nm)*
EKL Art.-Nr
EKL-Part-No.
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel Sockel 775
1
-
Khler
Heatsink
Hhe
Total heigh
21510021052
Papst 8412 N/2GHP
Sintec Gleitlager
80x80x25 mm, 1.000 - 3.600 U/min
Papst 8412 N/2GHP
Sintec Sleeve Bearing
80x80x25 mm, 1.000 - 3.600 rpm
96 x 102
Cu, Al
3 heat-
pipes
70 x
Schrauben
mit Federn &
Backplate
Screws with
springs &
backplate
Khler
Heatsink
Hhe
Total heigh
21510021055
Everflow R127025BMAF
Doppelkugellager
70x70x25 mm, 800 - 4.200 U/min
Everflow R127025BMAF
2 Ball Bearings
70x70x25 mm, 800 - 4.200 rpm
67,5 x 96
Cu, Al
3 heat-
pipes
84,4 x
Schrauben
mit Federn &
Backplate
Screws with
springs &
backplate
Mit Backplate Art. Nr. 60400000352 fr alle* Intel Prozessoren im Sockel1156
Mit Quarterbackplate Art. Nr. 60400000367 fr alle* Intel Prozessoren im Sockel1366
Intel Pentium 4 Prescott 550/551/650 (3.4 GHz, 90nm)*
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel CoreTM 2 Duo E6700 (2.66 GHz, 65 nm)*
Intel Pentium 4 Cedar Mill 671 (3.8 GHz, 65nm)*
EKL Art.-Nr
EKL-Part-No.
Abmessungen(mm)
Dimenions(mm)Lfter
Fan
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium 4 Cedar Mill 661 (3.6 GHz, 65nm)*
Intel CoreTM2 Extreme X6800 (2.93 GHz, 65 nm)*
Intel CoreTM2 Duo E6700 (2.66 GHz, 65 nm)*
*Siehe Seite 4
Befestigung
Mounting
Intel Pentium D 960 (3.6 GHz, PRB=1)*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Intel Pentium D 840 (3.2 GHz, PRB=1)*
Intel Sockel 775
2
-
Khler
Heatsink
Hhe
Total heigh
21510021027
Everflow F129025SMAF2GoaR
Enter Bearing
92x25 mm, 750 - 2.500 U/min
Everflow F129025SMAF2GoaR
Enter Bearing
92x25 mm, 750 - 2.500 rpm
96 x 102
Cu, Al
3 heat-
pipes
70 xIntel ref.
Push Pins
Khler
Heatsink
Hhe
Total heigh
21510021035
Everflow F129025SMAF2GoaR
Enter Bearing
92x25 mm, 750 - 2.500 U/min
Everflow F129025SMAF2GoaR
Enter Bearing
92x25 mm, 750 - 2.500 rpm
96 x 102
Cu, Al
3 heat-
pipes
70 x
Schrauben
mit Federn &
Backplate
Screws with
springs &
backplate
Befestigung
Mounting
Intel Pentium D 820 (2.8 GHz,90nm)*
Intel Pentium D 820 (2.8 GHz,90nm)*
Intel CoreTM2 Extreme X6800 (2.93 GHz, 65 nm)*
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel CoreTM 2 Duo E6700 (2.66 GHz, 65 nm)*
Intel Pentium D 930 (3.0 GHz, 65nm)*
alle* Intel Prozessoren im Sockel1156
Intel CoreTM2 Extreme X6800 (2.93 GHz, 65 nm)*
Abmessungen(mm)
Dimenions(mm)
Intel Pentium 4 Prescott 570/670/672 (3.8 GHz, 90nm)*
Lfter
Fan
Intel Pentium 4 Cedar Mill 671 (3.8 GHz, 65nm)*
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
EKL Art.-Nr
EKL-Part-No.
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Intel CoreTM 2 Duo E6700 (2.66 GHz, 65 nm)*
Befestigung
Mounting
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Intel Pentium D 930 (3.0 GHz, 65nm)*
*Siehe Seite 4
Abbildungen hnlich / Illustrations similarly
Intel Pentium 4 Cedar Mill 671 (3.8 GHz, 65nm)*
Abmessungen(mm)
Dimenions(mm)
Intel Sockel 775
3
-
Khler
Heatsink
Hhe
Total heigh
21510021030
Native DF09225 12B1H-U4P
Kugel-/Gleitlager
92x25 mm, 800 - 2.800 U/min
Native DF0922512B1H-U4P
Ball-/Sleeve Bearing
92x25 mm, 2.800 rpm
Radial
Al, Cu75 x
Intel ref.
Push Pins
*Info:
Befestigung
Mounting
EKL Art.-Nr
EKL-Part-No.
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel CoreTM2 Duo E6700 (2.66 GHz, 65 nm)
Lfter
Fan
Intel Pentium 4 Cedar Mill 661 (3.6 GHz, 65nm)
Intel CoreTM2 Extreme X6800 (2.93 GHz, 65 nm)
Abmessungen(mm)
Dimenions(mm)
Intel Pentium 4 Prescott 550/551/650 (3.4 GHz, 90nm)
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Alle Khler fr Intel CPUs im Sockel 775 sind mit einem Lfter mit 4-poligem Mainboardstecker aus-
All coolers for cooler Intel CPUs in socket 775 are equipped with a fan with 4-pin mainbord
connector and support the PWM fan speed control of the mainboard.
Abbildungen hnlich / Illustrations similarly
Intel Sockel 775
4
-
Khler
Heatsink
Hhe
Total heigh
21910121001
Native GP/DFr922512DL-003
Kugel-/Gleitlager
92x25 mm, 800 - 2.800 U/min
Native GP/DFr922512DL-003
Ball-/Sleeve Bearing
92x25 mm, 800 - 2.800 rpm
Radial
Al, Cu66 x
Intel ref.
Push Pins
Khler
Heatsink
Hhe
Total heigh
21910121002
Native GP/DFr922512CD-012
Hydraulik Lager
92x25 mm, 900 - 1.800 U/min
Native GP/DFr922512CD-012
Hydraulic Bearing
92x25 mm, 900 - 1.800 rpm
Radial
AL66 x
Intel ref.
Push Pins
Intel Core i7 82W TDP Sockel LGA 1156*
Intel Core i3 73W TDP Sockel LGA 1156*
Intel Core i5 82W TDP Sockel LGA 1156*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
intel Core i5 750 (95W TDP)socket LGA 1156*
intel Core i7 870 (95W TDP)socket LGA 1156*
intel Clarkdale CPU (73W TDP)socket LGA 1156*
intel Clarkdale CPU (87W TDP)socket LGA 1156*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium 73W TDP Sockel LGA 1156*
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Intel Sockel 1156
5
-
Khler
Heatsink
Hhe
Total heigh
21910121005
Native GP/DFr922512CD012Hydraulik Lager
92x25 mm, 900 - 1.800 U/min
Native GP/DFr922512CD012Hydraulic Bearing
92x25 mm, 900 - 1.800 rpm
Radial
Al68 x
Schrauben
mit Federn &
Backplate
Screws with
springs &
backplate
Khler
Heatsink
Hhe
Total heigh
21910121008
Native GP/DFr922512CD-012
Hydraulik Lager
92x25 mm, 900 - 1.800 U/min
Native GP/DFr922512CD-012
Hydraulic Bearing
92x25 mm, 900 - 1.800 rpm
Radial
AL66 x
Intel ref.
Push Pins
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel Core i7 82W TDP Sockel LGA 1156*
Intel Pentium 73W TDP Sockel LGA 1156*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Abbildungen hnlich / Illustrations similarly
Intel Core i5 82W TDP Sockel LGA 1156*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Core i3 73W TDP Sockel LGA 1156*
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Befestigung
Mounting
Intel Pentium 73W TDP Sockel LGA 1156*
Intel Core i3 73W TDP Sockel LGA 1156*
Intel Core i5 95W TDP Sockel LGA 1156*
Intel Core i7 95W TDP Sockel LGA 1156*
Intel Sockel 1156
6
-
Khler
Heatsink
Hhe
Total heigh
21910121009
Native GP/DFr922512CD012Hydraulik Lager
92x25 mm, 900 - 1.800 U/min
Native GP/DFr922512CD012Hydraulic Bearing
92x25 mm, 900 - 1.800 rpm
Radial
Al61 x
Schrauben
mit Federn &
Backplate
Screws with
springs &
backplate
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Intel Core i7 95W TDP Sockel LGA 1156*
Intel Core i3 73W TDP Sockel LGA 1156*
Intel Core i5 95W TDP Sockel LGA 1156*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium 73W TDP Sockel LGA 1156*
Intel Sockel 1156
7
-
Khler
Heatsink
Hhe
Total heigh
22010021001
Everflow F126020BUAF6A9bR
Doppelkugellager
60x60x20 mm, 1.000 - 7.000 U/min
Everflow F126020BUAF6A9bR
2 Ball Bearings
60x60x20 mm, 1.000 - 7.000 rpm
Radial
Al, Cu64 x
Schrauben mit Federn
screws with springs
Befestigung
Mounting
intelXeon processor W3570 (NehalemWS) socket LGA1366*
intelXeon processor X6550 (NehalemEX) socket LGA1366*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
intelXeon processor X5590 (NehalemEP) socket LGA1366*intelXeon processor E6540 (NehalemEX) socket LGA1366*
intelXeon processor L7555 (NehalemEX LV) socket LGA1366*intelXeon processor E7540 (NehalemEX) socket LGA1366*intelXeon processor X7560 (NehalemEX) socket LGA1366*
intelXeon processor L5530 (NehalemEP LV) socket LGA1366*intelXeon processor W5580 (NehalemEP) socket LGA1366*intelXeon processor E5540 (NehalemEP) socket LGA1366*
Intel Sockel 1366
8
-
Khler
Heatsink
Hhe
Total heigh
21710021002
Native GP/DF0802512CU-001
Hydraulik Lager
80x80x25 mm, 800 - 3.400 U/min
Native GP/DF0802512CU-001
Hydraulic Bearing
80x80x25 mm, 800 - 3.400 rpm
Radial
Al, Cu68 X
EKL
Easy Clip
Khler
Heatsink
Hhe
Total heigh
21710121011
Native GP/DFr922512CM-001
Gleitlager
92x25 mm, 1.100 - 3.200 U/min
Native GP/DFr922512CM-001
Sleeve Bearing
92x25 mm, 1.100 - 3.200 rpm
72x72
Al71 x
Metallclips
metal clips
AMD SempronTM 3500+, Socket 939
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
AMD AthlonTM 64 4000+, Socket 754
AMD AthlonTM 64 4000+, Socket 939
AMD AthlonTM 64 3800+, Socket AM2
AMD AthlonTM 64 X2 5000+, Socket 939
AMD AthlonTM 64 X2 5200+, Socket AM2
AMD AthlonTM 64 X4, 9650+ (95W TDP), Socket AM2+
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
AMD SempronTM 3800+, Socket AM2
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Abbildungen hnlich / Illustrations similarly
AMD SempronTM 3500+, Socket754
Befestigung
Mounting
AMD SempronTM, 3800+, LE-1300, Dualcore 2300+, Socket AM2
AMD AthlonTM 64, 4000+, Socket AM2
AMD AthlonTM 64 X2, 5800+ (89W TDP), Socket AM2
AMD AthlonTM 64 X2, BE-2400, Socket AM2
AMD AthlonTM 64 X3, 6650+ (65W TDP), Socket AM2+
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
AMD Sockel AM2/754/939/940
9
-
Khler
Heatsink
Hhe
Total heigh
21710021001
Native GP/DFr922512DL-001
Kugel-/Gleitlager
92x25 mm, 800 - 2.800 U/min
Native GP/DFr922512DL-001
Ball-/Sleeve Bearing
92x25 mm, 800 - 2.800 rpm
105x96
Cu, Al
4 heat-
pipes
73,5 xMetallclips
metal clips
AMD AthlonTM 64 FX60, Socket 939
AMD AthlonTM 64 X2 5200+, Socket AM2
AMD AthlonTM 64 FX62, Socket AM2
AMD AthlonTM 64 3800+, Socket AM2
AMD OpteronTM 1220, Socket AM2
*Einsetzbar fr Motherboards die ein Retentionmodul mit 3,5" Lochabstand besitzen
*Useable for motherboards using retention modules with 3.5" mounting hole distance
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Lfter
Fan
AMD OpteronTM 2220/8220 S F*
AMD SempronTM 3500+, Socket754/939
Abmessungen(mm)
Dimenions(mm)
AMD AthlonTM 64 4000+, Socket 754/939
AMD AthlonTM 64 X2 5000+, Socket 939
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
all AMD OpteronTM S 940
AMD SempronTM 3800+, Socket AM2
EKL Art.-Nr
EKL-Part-No.
AMD Sockel AM2/754/939/940
10
-
Khler
Heatsink
Hhe
Total heigh
21204021000
Papst 8412 N/2G
Sintec Gleitlager
80x80x25 mm, 3.100 U/min
Papst 8412 N/2G
Sintec Sleeve Bearing
80x80x25 mm, 3.100 rpm, Tacho
Radial
Al, Cu68 x
EKL
Easy Clip
Khler
Heatsink
Hhe
Total heigh
21204021040
YS Tech FD 128025HB-N(2M5)
Kugellager
80x80x25 mm, 1700 - 2900 U/min
YS Tech FD 128025HB-N(2M5)
Ball Bearings
80x80x25 mm, 1700 - 2900 rpm
Radial
Al, Cu68 x
EKL
Easy Clip
Lfter
Fan
Abbildungen hnlich / Illustrations similarly
Intel Pentium 4 Northwood (all), Prescott 3.4 GHz
Abmessungen(mm)
Dimenions(mm)
Abmessungen(mm)
Dimenions(mm)
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium 4 Northwood (all), Prescott 3.4 GHz
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Befestigung
Mounting
EKL Art.-Nr
EKL-Part-No.
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel Sockel 478
11
-
Khler
Heatsink
Hhe
Total heigh
21204021023
YS Tech FD 128025 HB-N(2F7)
Doppelkugellager
80x80x25 mm, 3.400 U/min
YS Tech FD 128025 HB-N(2F7)
2 Ball Bearings
80x80x25 mm, 3.400 rpm
Radial
Al, Cu83 x
Metallclips
Metal clips
Khler
Heatsink
Hhe
Total heigh
21204021028
Papst 8412 N/2G
Sintec Gleitlager
80x80x25 mm, 3.100 U/min
Papst 8412 N/2G
Sintec Sleeve Bearing
80x80x25 mm, 3.100 rpm
Radial
Al, Cu68 x
Metallclips
Metal clips
Lfter
Fan
Abbildungen hnlich / Illustrations similarly
Intel Pentium 4 Northwood (all), Prescott 3.6 GHz
Abmessungen(mm)
Dimenions(mm)
Abmessungen(mm)
Dimenions(mm)
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium 4 Northwood (all), Prescott 3.6 GHz
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Befestigung
Mounting
EKL Art.-Nr
EKL-Part-No.
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel Sockel 478
12
-
Khler
Heatsink
Hhe
Total heigh
21004011007
Delta AFB0712LB-BS-SY 10
Kugel-/Gleitlager
70x70x15 mm, 2.800 U/min
Delta AFB0712LB-BS-SY 10
Ball-/Sleeve Bearing
70x70x15 mm, 2.800 rpm
93 x 68,2
Al62 x
Metallclips
Metal clips
Prescott 2,8 GHz
CeleronD350 (3,2 GHz)
Khler
Heatsink
Hhe
Total heigh
21004001033
Papst 712 F/2L
Sintec Gleitlager
70x70x15 mm, 3.300 U/min
Papst 712 F/2L
Sintec Sleeve Bearing
70x70x15 mm, 3.300 rpm
80 x 71,5
Al61 X
Metallclips
Metal clips
Prescott 2,8 GHz
CeleronD350 (3,2 GHz)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Abbildungen hnlich / Illustrations similarly
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Intel Pentium 4 Northwood (all)
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium 4 Northwood (all)
Intel Sockel 478
13
-
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Alle Khler fr Nocona sind auch mit Befestigungsschrauben M3 erhltlich!
All coolers fr Nocona are also available with mounting screws M3!
Beim Einsatz temperaturgeregelter CPU-Khler muss darauf geachtet werden,dass die Mainboard eigene Regelung abgeschaltet ist.
Please note that on-board fan speed control must be switched offwhen using a temperature controlled CPU cooler.
Abbildungen hnlich / Illustrations similarly
Intel XEON FSB 800 MHz
14
-
Khler
Heatsink
Hhe
Total heigh
31199021014ohne Lfter
no fan
88,9x78,74
Cu62,5 X
CEK-Bef.
6-32
Mounting
CEK 6-32
Alle Khler fr Dempsey sind auch mit Befestigungsschrauben M3 erhltlich!
All coolers for Dempsey are also available with mounting screws M3!
Abbildungen hnlich / Illustrations similarly
Depends on airflow inside the rack.
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Befestigung
Mounting
Intel Woodcrest Prozessoren im Sockel LGA 771
Abhngig vom Luftstrom im Gehuse.
Intel XEON FSB 667/1066 Dempsey processors socket LGA771
Intel Woodcrest Prozessoren in socket LGA 771
Intel XEON FSB 667/1066 Dempsey Prozessoren im Sockel LGA771
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel XEON FSB 667/1066 MHz
15
-
Khler
Heatsink
Hhe
Total heigh
20704001026
Papst 612 F/2
Gleitlager
60x60x15 mm, 3.900 U/min
Papst 612 F/2
Sleeve Bearing
60x60x15 mm, 3.900 rpm
80x56,8 Aluminium
53 xMetallclip
metal clip
Khler
Heatsink
Hhe
Total heigh
20704001097
Everflow R127025DL (TC4A801)
Kugel-/Gleitlager
70x70x25 mm, 1.500-2.700 U/min
temperaturgeregelt
Everflow R127025DL (TC4A801)
Ball-/Sleeve Bearing
70x70x25 mm, 1.500-2.700 rpm
temperature controlled
76x66,3
Al, Cu63 x
Metallclip
metal clip
Befestigung
Mounting
Intel Celeron S370 1.4GHz
AMD AthlonTM XP 1900+ (Thunderbred 233 MHz FSB) 1.6 GHz
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Intel PIII Tualatin S370 1.53 GHz
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
AMD AthlonTM MP 2800+ (Barton 266 MHz FSB) 2.133 GHz
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
AMD AthlonTM XP 3000+ (Barton 333 MHz FSB) 2.167 GHz
AMD AthlonTM MP 2800+ (Barton 266 MHz FSB) 2.133 GHz
EKL Art.-Nr
EKL-Part-No.
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel PIII Tualatin S370 1.53 GHz
Intel Celeron S370 1.4GHz
AMD AthlonTM XP 3200+ (Barton 400 MHz FSB) 2.200 GHz
AMD Sockel A / Intel Sockel 370
16
-
Khler
Heatsink
Hhe
Total heigh
20704001096
Papst 712 F/2L
Sintec Gleitlager
70x70x15 mm, 3.300 U/min
Papst 712 F/2L
Sintec Sleeve Bearing
70x70x15 mm, 3.300 rpm
89x89
Aluminium71 x
Metallclip
metal clip
Befestigung
Mounting
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Abbildungen hnlich / Illustrations similarly
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Intel PIII Tualatin S370 1.53 GHz
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Intel Celeron S370 1.4GHz
AMD AthlonTM XP 3000+ (Barton 333 MHz FSB) 2.167 GHz
AMD AthlonTM XP 3200+ (Barton 400 MHz FSB) 2.200 GHz
AMD AthlonTM MP 2800+ (Barton 266 MHz FSB) 2.133 GHz
AMD Sockel A / Intel Sockel 370
17
-
Khler
Heatsink
Hhe
Total heigh
21304011023
AD0512LB-G76 (T)LF
Doppelkugellager
50x50x10 mm, 3.700 U/min
AD0512LB-G76 (T)LF
2 Ball Bearings
50x50x10 mm, 3.700 rpm
50x61,6 28 x
Schrauben
mit Federn&
Backplate
Screws with
springs &
backplate
Intel Pentium M Processor 780 (Dothan 90nm 27W) Socket mPGA/BGA 479*
Intel Celeron M Processor 450 (Yonah 65nm 27W) Socket mPGA/BGA 479*
Intel Celeron M Processor 530 (Merom 65nm 30W) Socket mPGA/BGA 479*
Intel Core Duo processor T7700 (Merom 65nm 35W) Socket mPGA/BGA 479*
Intel Core Duo processor L7500 (Merom 65nm 17W) Socket mPGA/BGA 479*
Intel Core Duo processor U7600 (Merom 65nm 10W) Socket mPGA/BGA 479*
Intel Core Solo processor U1500 (Yonah 65nm 5.5W) Socket mPGA/BGA 479*
Khler
Heatsink
Hhe
Total heigh
21304011015
EKL R126010BU (AI9F0aR)
Doppelkugellager
60x60x10 mm, 4.600 U/min
EKL R126010BU (AI9F0aR)
2 Ball Bearings
60x60x10 mm, 4.600 rpm
60x60
Cu24,5 x
Metallclip
metal clip
Abbildungen hnlich / Illustrations similarly
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Abhngig vom Luftstrom im Gehuse / Depends on the airflow inside the rack
Intel Celeron M Processor 390 (Dothan 90nm 27W) Socket mPGA/BGA 479*
Befestigung
Mounting
EKL Art.-Nr
EKL-Part-No.
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
IntelPIII Tualatin, S 370 , 1,4 GHz*
1 Unit
18
-
Khler
Heatsink
Hhe
Total heigh
21304011030
EKL R127010BH (AI6F2aR)
Doppelkugellager
70x70x10 mm, 4.200 U/min
EKL R127010BH (AI6F2aR)
2 Ball Bearings
70x70x10 mm, 4.200 rpm
83,2x76,9
Cu26 x
Schrauben
mit Federn &
Backplate
Screws with
Springs &
backplate
Khler
Heatsink
Hhe
Total heigh
21310022001
EKL R127010BU(AF6A9aR)
Doppelkugellager
70x70x10 mm, 1.000 - 4.800 U/min
EKL R127010BU(AF6A9aR)
2 Ball Bearings
70x70x10 mm, 1.000 - 4.800 rpm
91x91
Cu24,5 x
Schrauben
mit Federn &
Backplate
Screws with
Springs &
backplate
Abhngig vom Luftstrom im Gehuse / Depends on the airflow inside the rack
Abbildungen hnlich / Illustrations similarly
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
IntelPrescott, S 775*
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Befestigung
Mounting
IntelPentium 4, S 478, 2,8 GHz*
EKL Art.-Nr
EKL-Part-No.
1 Unit
19
-
Khler
Heatsink
Hhe
Total heigh
21310022002
Everflow R127015BUAF2B701
Doppelkugellager
70x70x15 mm, 600 - 5.100 U/min
Everflow R127015BUAF2B701
2 Ball Bearings
70x70x15 mm, 600 - 5.100 rpm
91x91
Cu29,5 x
Schrauben
mit Federn &
Backplate
Screws with
Springs &
backplate
Khler
Heatsink
Hhe
Total heigh
31199111003ohne Lfter
no fan91x91
Cu27 x
Schrauben
mit Federn &
Backplate
Screws with
Springs &
backplate
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
IntelCeleron D, S 775*
IntelPentium 4, S 775*
Abbildungen hnlich / Illustrations similarly
EKL Art.-Nr
EKL-Part-No.
IntelPentium D, S 775*
Lfter
Fan
Abhngig vom Luftstrom im Gehuse / Depends on the airflow inside the rack
Abmessungen(mm)
Dimenions(mm)
IntelPrescott, S 775*
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
EKL Art.-Nr
EKL-Part-No.
Befestigung
Mounting
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
1 Unit
20
-
Khler
Heatsink
Hhe
Total heigh
21310122000
R127015DL(AF783aR)
Kugel-/Gleitlager
70x70x15 mm, 1.000 - 3.000 U/min
R127015DL(AF783aR)
Ball-/Sleeve Bearing
70x70x15 mm. 1.000 - 3.000 rpm
70x107
CU31 x
Schrauben
mit Federn&
Backplate
Screws with
springs &
backplate
Abbildungen hnlich / Illustrations similarly
SepronTM socket AM2
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
PhenomTM socket AM2+
OpteronTM socket AM2
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
AthlonTM 64 socket AM2
1 Unit +
21
-
Khler
Heatsink
Hhe
Total heigh
21610121006
Superred CHD9212CB-OA(TP)
Doppelkugellager
92x92x38 mm, 4.500 U/min
temperaturgeregelt
Superred CHD9212CB-OA(TP)
2 Ball Bearing
92x92x38 mm, 4.500 rpm
temperature controlled
142x132,4
Al, Cu96 x
Schrauben
Screws
Abbildungen hnlich / Illustrations similarly
Abmessungen(mm)
Dimenions(mm)
IntelPentium D 960 (3.6 GHz, PRB=1)
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
IntelCoreTM2 Duo E6700 (2.66 GHz, 65 nm)
IntelCoreTM2 Extreme X6800 (2.93 GHz, 65 nm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
IntelPentium Cedar Mill 671 (3.8 GHz, 65nm)
IntelPentium D 840 (3.2 GHz, PRB=1)
IntelPentium Prescott 570/670/672 (3.8 GHz, 90nm)
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Intel Sockel 775 BTX
22
-
Khler
Heatsink
Hhe
Total heigh
20804011015
Papst 612 F/2
Gleitlager
60x60x15 mm, 3.900 U/min
Papst 612 F/2
Sleeve Bearing
60x60x15 mm, 3.900 rpm
89x64
Aluminium 38 x
Intel ref.
Retention modules with
metal clips
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium 4 Processor 2.00 GHz, 256K Cache, 400 MHz FSB
Sockel 423
23
-
Khler
Heatsink
Hhe
Total heigh
20204000013
Papst 0512 F /2
Gleitlager
50x50x15 mm, 5.000 U/min
Papst 0512 F /2
Sleeve Bearing
50x50x15 mm, 5.000 rpm
50x50
Aluminium36 x
Metallclip
Metal clip
AMD 80486
Khler
Heatsink
Hhe
Total heigh
20204000006
YS Tech FD 125010 MB (1A5)
Kugellager
50x50x10 mm, 4.600 U/min
YS Tech FD 125010 MB (1A5)
Ball bearing
50x50x10 mm, 4.600 rpm
50x50
Aluminium30 X
Metallclip
Metal clip
AMD 80486
Intel 80486
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel 80486
Sockel 3 und 5
24
-
Khler
Heatsink
Hhe
Total heigh
20604011015
Papst 512 F/2
Gleitlager
40x40x10 mm, 6.000 U/min
Papst 512 F/2
Sleeve Bearing
40x40x10 mm, 6.000 rpm
137,2x50,4A
luminium30 x Kunststoffclips
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Wr
mel
eit-
med
ium
Inte
rfac
e M
ater
ial
Befestigung
Mounting
Intel Pentium Pro
Intel Pentium II
Intel Pentium III
Intel Celeron (Mendocino)
Abbildungen hnlich / Illustrations similarly
EKL Art.-Nr
EKL-Part-No.
Lfter
Fan
Abmessungen(mm)
Dimenions(mm)
SECC2
25
-
EKL Art.-NrEKL-Part-No.
61100000000
61100000001
61100000002
61100000008
61100000003
61100000004
61100000005
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Heatpipe "sintered powder", Durchmesser 8mm
Lnge 200mm, massenverpackt, Qmax = 40 W
Heatpipe "sintered powder", Durchmesser 8mm
Lnge 250mm, massenverpackt, Qmax = 27 W
Heatpipe "sintered powder", Durchmesser 8mm
Lnge 150mm, massenverpackt, Qmax = 65 W
BeschreibungDescription
Heatpipe "sintered powder", Durchmesser 6mm
Lnge 150mm, massenverpackt, Qmax = 50 W
Heatpipe "sintered powder", Durchmesser 6mm
Lnge 200mm, massenverpackt, Qmax = 30 W
Heatpipe "sintered powder", Durchmesser 6mm
Lnge 250mm, massenverpackt, Qmax = 20 W
Heatpipe "sintered powder", Durchmesser 6mm
Lnge 300 mm, massenverpackt, Qmax = 15 W
Heatpipes 6 mm / 8 mm
26
-
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Kundenspezifische Khllsungen
Customized cooling solutions
Kundenspezifische Frsteile
Customized CNC parts
Kundenspezifische Stanzteile
Customized punshing parts
Kundenspezifische Druckgussteile
Customized moulding parts
Abbildungen hnlich / Illustrations similarly
Kundenspezifische Lsungen
27
-
Auf den folgenden Seiten prsentieren wir Ihnen eine Auswahl von DC und AC Lftern
welche Sie von uns beziehen knnen.
Es wrde den Rahmen sprengen alle erhltlichen Lfter im Katalog aufzufhren.
Sollten Sie einen bestimmten Lfter im Katalog oder auf unserer Homepage
www.ekl-ag.de
nicht finden, wenden Sie sich bitte an unseren Vertrieb
Dieser wird Sie gerne bei der Suche nach diesem Lfter oder einer Alternative untersttzen.
On the following pages wie offer a range of DC an AC fans which you can
purchase from EKL AG.
It would go beyond the scope of this catalogue to show all available fans.
If you couldn`t find a specific fan in this catalogue or on our homepage
www.ekl-ag.de
Please contact our sales team
Our sales will be glad to help you finding this fan or an alternative solution.
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Lfter / Fans
28
-
cfm in / to m3/secmultiplizieren /
multiply by0,00047
cfm in / to m3/hmultiplizieren /
multiply by1,698
cfm in / to l/secmultiplizieren /
multiply by0,47117
m3/sec in / to cfmmultiplizieren /
multiply by0,00016
m3/h in / to cfmmultiplizieren /
multiply by0,589
l/sec in / to cfmmultiplizieren /
multiply by2,12
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Umrechnungstabelle Luftfrdermenge
Conversation factors airflowZuverlssigkeits/Lebensdauererwartung
Reliability/Life Time
Es gibt 3 gebruchliche Kenngren um die Zuverlssigkeit
oder Lebensdauererwartung von Lftern anzugeben:
There are 3 different values to quote the reliability or the life
expectancy of a fan:
MTTF
Mittlere Zeitdauer bis zum ersten Fehler
Mean time to the first failure
MTBF
Mittlere Zeitdauer zwischen zwei Fehlern
Mean time between failure
Lebensdauererwartung L10
Lifetime L10
Angabe darber, dass 10% der Lfter (ber eine sehr groe
Menge gemittelt) nach Ablauf der angegebenen Zeit
ausfallen knnen.
Statement that 10% of the fans (averaged for a large quantity)
can faile after the expiration of this term.
MTTF, MTBF und L10 sind statistische Angaben, die nur
durch Beobachtung groer Mengen eines Lfters ber einen
langen Zeitraum erfassbar sind. Abweichungen bei einzelnen
Lieferlosen sind deshalb normal.
MTTF, MBTF und L10 are statistical values that can only be
determined by observing large quantities of a fan over a
long period of time. Therefore deviations in different delivery
lots are normal.
Schaltbild Tachosignal
Circuit diagram speed signal
Alle Angaben im Katalog sind Angabender entsprechenden Lfterhersteller.
All specifications are statements of thefan manufacturers.
Lfter / Fans
29
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 255 N 25 8 20 5 9600 16 3,2 0,4 Sintec SleeveLitze
Lead wire13007000060
Papst 252 N 25 8 20 12 9000 15 3,2 0,5 Sintec SleeveLitze
Lead wire13007000061
Papst 405 F 40 10 32 5 5400 22,1 8 0,7 Sintec Sleeve 2-Pol-Board 13002000005
Papst 405 F/2 40 10 32 5 5400 22,1 8 0,7 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000046
Papst 412 F 40 10 32 12 5400 22,1 8 0,7 Sintec SleeveY-DoppelY-double
13000000002
Papst 412 F/2H 40 10 32 12 6000 26 9 0,8 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000001
Papst 412 FH 40 10 32 12 6000 26 9 0,8 Sintec SleeveY-DoppelY-double
13000000065
Papst 412 FM 40 10 32 12 4200 16,5 6 0,6 Sintec SleeveY-DoppelY-double
13000000003
Papst 412 H 40 20 32 12 8100 29 13,5 1,6 Sintec SleeveY-DoppelY-double
13000000056
Papst 412 40 20 32 12 6000 18 10 0,9 Sintec SleeveY-DoppelY-double
13000000001
Papst 412/2 40 20 32 12 6000 18 10 0,9 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000040
Papst 0412/2H, Kabell. 135mm 40 20 32 12 8000 28 13,5 1,6 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000040
Papst 412 J/2HH 40 25 32 12 13000 46 24 3,3 2-Ball3-Pin-Molex3-pin-Molex
Tacho 13004000032
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
25-40 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
30
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 512 F 50 15 42 12 5000 30 20 1 Sintec SleeveY-DoppelY-double
13000000004
Papst 512 F/2 50 15 42 12 5000 30 20 1 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000002
Papst 612 F 60 15 50 12 3900 27 29 1 Sintec SleeveY-DoppelY-double
13000000025
Papst 612 F/2 60 15 50 12 3900 27 29 1 Sintec Sleeve3-Pin-Molex3-pin-Molex
13004000003
Papst 612 F/2L 60 15 50 12 2650 16 19 0,4 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000058
Papst 612 FL 60 15 50 12 2650 16 19 0,4 Sintec SleeveY-DoppelY-double
13000000031
Papst 612 N/2GH 60 25 50 12 5600 38 46 2,4 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000057
Papst 612 N/2GME 60 25 50 12 4100 28 35 1,2 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000056
Papst 612 N/2GML 60 25 50 12 3000 19 25 0,9 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000022
Papst 612 N/2HH 60 25 50 12 6850 43 56 3 2-Ball3-Pin-Molex3-pin-Molex
Tacho 13004000034
Papst 612 NGL 60 25 50 12 2500 16 21 0,7 Sintec SleeveY-DoppelY-double
13000000048
Papst 612 NGML 60 25 50 12 3000 19 25 0,9 Sintec SleeveY-DoppelY-double
13000000024
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
50-60 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
31
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 712 F/2 70 15 61,5 12 5300 38 44 1,7 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000027
Papst 712 F/2L 70 15 61,5 12 3300 25 28 0,6 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000029
Papst 8412 N 80 25 71,5 12 3100 32 69 2 2-BallY-DoppelY-double
13000000015
Papst 8412 N/2G 80 25 71,5 12 3100 32 69 2 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000039
Papst 8412 N/2GH 80 25 71,5 12 3600 37 79 2,8 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000033
Papst 8412 N/2GHP 80 25 71,5 12 3600 25 74 3 Sintec Sleeve4-Pin-Molex4-pin-Molex
TachoPWM
13010000000
Papst 8412 N/2GLE 80 25 71,5 12 1500 12 33 0,5 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000023
Papst 8412 N/2GME 80 25 71,5 12 2600 26 58 1,4 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000008
Papst 8412 N/2GMLE 80 25 71,5 12 2050 19 45 0,9 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000020
Papst 8412 NG 80 25 71,5 12 3100 32 69 2 Sintec SleeveY-DoppelY-double
13000000012
Papst 8412 NGH 80 25 82,5 12 3600 37 79 2,8 Sintec SleeveY-DoppelY-double
13000000030
Papst 8412 NGLE 80 25 71,5 12 1500 12 33 0,5 Sintec SleeveY-DoppelY-double
13000000014
Papst 8412 NGME 80 25 71,5 12 2600 26 58 1,4 Sintec SleeveY-DoppelY-double
13000000033
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
70-80 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
32
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 8412 NGMLE 80 25 71,5 12 2050 19 45 0,9 Sintec SleeveY-DoppelY-double
13000000028
Papst 8412 NH 80 25 71,5 12 3600 37 79 2,2 2-BallY-DoppelY-double
13000000032
Papst 8412 NLE 80 25 71,5 12 1500 17 33 0,3 2-BallY-DoppelY-double
13000000011
Papst 8412 NGMLE 80 25 71,5 12 2050 19 45 0,9 Sintec SleeveY-DoppelY-double
13000000028
Papst 8412 NH 80 25 71,5 12 3600 37 79 2,2 2-BallY-DoppelY-double
13000000032
Papst 8412 NLE 80 25 71,5 12 1500 17 33 0,3 2-BallY-DoppelY-double
13000000011
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
80 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
33
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 3212 J/2N 92 38 82,5 12 6000 51 130 7,2 2-Ball3-Pin-Molex3-pin-Molex
13004000054
Papst 3412 N/2GHHP-479 92 25,4 82,5 12 3250 39 102 3,2 Sintec Sleeve4-Pin-Molex4-pin-Molex
TachoPWM
13010000001
Papst 3412 N/2GLE 92 25,4 82,5 12 1950 23 61 1,1 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000036
Papst 3412 N/2GLLE 92 25,4 82,5 12 1150 12 33 0,44 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000051
Papst 3412 NGLE 92 25,4 82,5 12 1950 23 61 1,1 Sintec SleeveY-DoppelY-double
13000000008
Papst 3412 NL 92 25,4 82,5 12 1950 23 61 1,2 2-BallY-DoppelY-double
13000000009
Papst 3412/2L 92 25,4 82,5 12 2200 16,9 61 1,3 2-Ball3-Pin-Molex3-pin-Molex
13004000005
Papst 4182 NGX 119 38 104,8 12 2800 44 160 3,5 Sintec SleeveOhne KabelWithout wire
13099100064
Papst 4312 L 119 32 104,8 12 1550 30 95 1,2 2-BallY-DoppelY-double
13000000017
Papst 4312 119 32 104,8 12 2800 45 170 5 2-BallY-DoppelY-double
13000000021
Papst 4412 F/2 119 25,4 104,8 12 2900 43 170 5,3 2-Ball3-Pin-Molex3-pin-Molex
Tacho 13004000055
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
92-119 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
34
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 4412 F/2GL 119 25,4 104,8 12 1600 26 94 1,3 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000024
Papst 4412 F/2GLL 119 25,4 104,8 12 1200 18 70 0,75 Sintec Sleeve3-Pin-Molex3-pin-Molex
Tacho 13004000049
Papst 4412 F/2GP-535 119 25,4 104,8 12 2900 43 170 6 Sintec Sleeve4-Pin-Molex4-pin-Molex
TachoPWM
13010000003
Papst 4412 F/2M 119 25,4 104,8 12 2400 38 140 3,2 2-Ball3-Pin-Molex3-pin-Molex
Tacho 13004000009
Papst 4412 FGL 119 25,4 104,8 12 1600 26 94 1,3 Sintec SleeveY-DoppelY-double
13000000027
Papst 4412 FM 119 25,4 104,8 12 2400 38 140 3,2 2-BallY-DoppelY-double
13000000016
Papst 4414 F/2M 119 25,4 104,8 24 2400 38 140 3,2 2-Ball3-Pin-Molex3-pin-Molex
Tacho 13004000028
Papst 4184 NGX 119 38 104,8 24 2800 44 160 3,5 Sintec SleeveOhne KabelWithout wire
13007000053
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
119 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
35
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 612 NGMI 60 25 50 122150-4100
14-28
18-35
1,3-1,7
Sintec SleeveY-DoppelY-double
NTC*30C-55C
13007000053
Papst 3412 NGMV 92 25 82,5 121400-2300
14-28
44-72
1,5-2
Sintec SleeveEinzelsteckerPower supply
NTC*30C-50C
13001000000
Papst 8412 NGMLV 80 25 71,5 121200-2050
>10-19
27-45
1,1-1,5
Sintec SleeveEinzelsteckerPower supply
NTC*30C-50C
13001000001
Papst 8412 NGMLV 80 25 71,5 121200-2050
>10-19
27-45
1,1-1,5
Sintec SleeveEinzelsteckerPower supply
NTC*30C-50C
13007000044
Papst 8412 NGMV 80 25 71,5 121600-2600
>13-26
35-58
1,4-2,0
Sintec SleeveEinzelsteckerPower supply
NTC*30C-50C
13001000006
*NTC
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
Variofan
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
36
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 8550 N 79,5 38 71,5 230 2700 30 50 12 Sintec-SleeveLitze
Lead wire13007100080
Papst 8850 N 79,5 38 71,5 230 2150 24 37 12,5 Sintec-SleeveLitze
Lead wire13007100085
Papst 3956 92 25,4 82,5 230 2650 35 59 11 2-BallOhne KabelWithout wire
13099100000
Papst 4550 N 119 38 104,8 230 2550 44 145 16,5 Sintec-SleeveOhne KabelWithout wire
13099100019
Papst 4606 N 119 38 104,8 115 3100 51 180 18 2-BallOhne KabelWithout wire
13099100003
Papst 4650 N 119 38 104,8 230 2650 46 160 19 Sintec-SleeveOhne KabelWithout wire
13099000004
Papst 4650 Z 119 38 104,8 230 2650 40 160 19 Sintec-SleeveOhne KabelWithout wire
13007100204
Papst 4650 ZW 119 38 104,8 230 2650 40 160 19 2-BallLitze
Lead wire13007100034
Papst 4656 N 119 38 104,8 230 2650 47 160 19 2-BallOhne KabelWithout wire
13099100006
Papst 4656 ZW 119 38 104,8 230 2650 40 160 19 2-BallLitze
Lead wire13007100035
Papst 4850 N 119 338 104,8 230 1800 32 100 10 Sintec-SleeveOhne KabelWithout wire
13099100018
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
80-119 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter AC / Fans AC
37
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
Papst 4850 Z 119 38 104,8 230 1700 26 100 13 Sintec SleeveOhne KabelWithout wire
13099100016
Papst 4890 N 119 38 104,8 230 1550 25 80 11 Sintec SleeveOhne KabelWithout wire
13099100020
Papst 9950 119 25,4 104,8 230 2450 37 117 14 Sintec SleeveOhne KabelWithout wire
13099100014
Papst 9956 119 25,4 104,8 230 2450 37 117 14 2-BallOhne KabelWithout wire
13099100012
Papst 5958 127 38 113,5 230 2750 44 180 18 2-BallOhne KabelWithout wire
13099100011
Papst 7056 ES 150 38 230 2800 52 330 29 2-BallOhne KabelWithout wire
13099100022
Papst 7450 ES 150 55 230 2700 58 390 47 2-BallLitze
Lead Wire13007000035
Papst 7856 ES 150 55 230 2800 48 325 45 2-BallLitze
Lead Wire-30C-+70C
13007100099
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Papst
119-150 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
38
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
FD122510MB(2N5) 25 10 20 12 8500 18 2,7 0,63 2-BallY-DoppelY-double
11200000001
FD124020HB(2F7) 40 20 32 12 6600 27 12,7 1,2 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000067
FD125010HB(2F7) 50 10 40 12 5200 34 20,4 1,68 2 Ball3-Pin-Molex3-pin-Molex
Tacho 11204000060
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
YS Tech
25 - 50 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
39
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
FD126020MB(2F5) 60 20 50 12 3600 30,5 33,9 1,32 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000034
FD126025HB-N(2A7) 60 25 50 12 4200 36 42,6 2,16 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000007
FD126025MB-N(2A5) 60 25 50 12 4100 33 36,2 2,16 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000006
FD126025MB-N(2T5) 60 25 50 121600-3200
14,5-31
17,8-35,8
1,44 2-BallY-DoppelY-double
NTC25c-50c
11200000004
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
YS Tech
50 - 60 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
40
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
FD128020LB(2F3) 80 20 71,5 12 2100 24 42,5 0,72 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000055
FD128020LB(2A1) 80 20 71,5 12 1300 20 25,3 0,48 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000091
FD128025HB-N(2F7) 80 25 71,5 12 3400 37,5 70,6 2,16 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000086
FD128025LB-N(2F3) 80 25 71,5 12 2150 24 46,1 0,72 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000031
FD128025MB-N(2M5) 80 25 71,5 121750-2900
22-32
37,6-62,6
0,96-1,56
2-Ball3-Pin-Molex3-pin-Molex
TachoNTC25C-50C
11204000029
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
YS Tech
70 - 80 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
41
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
FD129225MB-N(2N5) 92 25 82,5 12 2400 33 86,2 1,92 2-BallY-DoppelY-double
11200000006
FD121225LB(2F1) 120 25 105 12 1100 21 75,9 0,78 2-Ball3-Pin-Molex3-pin-Molex
Tacho 11204000046
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
YS Tech
92-120 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
42
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
AD0205LB-G50 (GL)_LF 25 25 20 5 8000 15,6 3,06 0,5 2 BallLitze
Lead wire12007100001
AD0305LB-G50 LF 30 30 24 5 8000 20,2 5,1 0,6 2 BallLitze
Lead wire12007000002
AD0412LB-G70 (8J)_LF 40 40 32 12 4200 14 7,98 0,96 2 BallY-DoppelY-double
12000100003
AD0505LB-G76(T)_LF 50 50 40 5 3700 20 15,29 0,6 2 Ball3-Pin Molex3-pin Molex
Tacho 12004100021
AD0512LB-G76(T)LF 50 50 40 12 3700 20 15,29 1,2 2 Ball3-Pin Molex3-pin Molex
12004100017
AD0612MB-D71GL 60 60 50 12 3900 28,8 24,12 1,32 2 BallY-DoppelY-double
12000000008
AD0612MB-G70 60 60 50 12 4200 28 12,39 1,56 2 Ball3-Pin Molex3-pin Molex
12004000009
AD0612UB-A7BGL_LF 60 60 50 12 5300 38,7 65 3,24 2 Ball4-Pin Molex4-pin-Molex
TachoPWM
12010000002
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
ADDA
25-60 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
43
-
Ka
nte
nl
nge
E
dg
e le
ngt
h
Tie
feT
hic
knes
s
Lo
chab
sta
nd
Ho
le s
pa
cin
g
A B C VDC min -1 dB(A) m/h Watt
AD0812HB-D76(T)_LF 80 80 71,5 12 3200 33,4 50,8 2,16 2 Ball3-Pin Molex3-pin Molex
Tacho 12004000011
AD0812LB-A70GL(TC) 80 80 71,5 12 2030 22,9 49,78 1,44 2 BallY-DoppelY-double
12000000006
AD0812MB-D71 80 80 71,5 12 2440 26 30,05 1,8 2 BallY-DoppelY-double
12000000011
AD0812MB-D71_LF 80 80 71,5 12 2440 26 38,05 1,8 2 BallLitze
Lead wire12007100008
AD0912MB-A76GL(T) 92 92 82,5 12 2400 31,3 73,9 2,04 2 Ball 3-Pin Molex Tacho 12004000007
AD912UB-A7BGL_LF 92,5 92,5 82,5 12 3800 46 125,14 5,4 2 Ball4-Pin Molex4-pin-Molex
TachoPWM
12010000001
AD1212XB-A7BGL 120 120 105 12 3100 47,1 209,65 7,8 2 Ball4-Pin Molex4-pin-Molex
TachoPWM
12010000000
Le
istu
ngs
au
fnah
me
Ra
ted
Po
we
r
La
ger
Be
ari
ng
typ
e
An
sch
luss
Co
nn
ect
or
EX
TR
AS
SP
EC
IAL
S
EK
L-A
rt. N
r.E
KL
-Pa
rt-N
o.
Abbildungen hnlich / Illustrations similarly
Availability on request
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
ADDA
80-120 mm
He
rste
llerb
eze
ich
nun
gM
an
ufa
ctu
rers
pa
rt n
o.
Abmessungen (mm)Dimensions (mm)
Ne
nn
span
nu
ng
Ra
ted
Vo
ltage
Ne
nn
dre
hza
hl
Ra
ted
Sp
eed
Ge
rus
chN
ois
e le
vel
Vo
lum
en
stro
mA
irflo
w
Verfgbarkeit auf Anfrage
Lfter DC / Fans DC
44
-
EKL Art.-NrEKL-Part-No.
60100000028
60100000059
80000000090
80000000007
80000000085
70700000002
70700000012
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
BeschreibungDescription
Lfterbefestigung
Fan mounting
Gehuseschraube fr Lfter 5 x 10 mm, selbstschneidend
Screws for case fans 5 x 10 mm, self cutting
Gehuseschraube fr Lfter 5 x 10 mm, nicht selbstschneidend
Screws for case fans 5 x 10 mm, not self cutting
Schwingungsdmpfende Lfterbefestigung, Gummi, Set mit 4 Stk.
Vibration shock absorber for fans, rubber, set with 4 pcs.
Kabeladapter
Cable adapter
Boardstecker, mnnlich, auf Y-Doppelstecker
Board connector, male, to double connector
3-Pin-Boardstecker, mnnlich, auf Y-Doppelstecker
3-pin-board connector, male, to double connector
Kabelverlngerung, Molexstecker 3-Pol auf Molexbuchse 3-Pol,
300 mm Kabellnge
Cable extension, 3-pin-board connector, male, to 3-pin-board
connector, female, cable length 300 mm
Verfgbarkeit auf Anfrage
Availability on request
Kabelverlngerung fr Lfter mit PWM-Steuerung
Molexstecker 4-pol. Auf Molexbuchse 4-Pol, 300 mm Kabellnge
Cable extention for fans with PWM-control, 4-pin-board connector,
male, to 4-pin-board connector, female, cable length 300mm
Lfter Zubehr/Fan Accessories
45
-
EKL Art.-NrEKL-Part-No.
80000000057
80000000004
80000000133
80000000005
80000000003
80000000162
80000000001
80000000147
80000000080Ersatzfilter fr Filterkassetten 120 x
120 mm, 45 ppi
Replacement filters for filter 80000000000
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
BeschreibungDescription
Filterkassetten und Ersatzfilter
Filter cartridges and replacement filters
Filterkassette fr 60 mm Lfter, 3-teilig, 100 ppi
Filter cartridge for 60 mm fan, three-part, 100 ppi
Filterkassette fr 80 mm Lfter, 3-teilig, 45 ppi
Filter cartridge for 80 mm fan, three-part, 45 ppi
Filterkassette fr 80 mm Lfter, 3-teilig, 100 ppi
Filter cartridge for 80 mm fan, three-part, 100 ppi
Filterkassette fr 92 mm Lfter, 3-teilig, 45 ppi
Filter cartridge for 92 mm fan, three-part, 45 ppi
Filterkassette fr 119/120 mm Lfter, 3-teilig, 45 ppi
Filter cartridge for 119/120 mm fan, three-part, 45 ppi
Ersatzfilter fr Filterkassetten 60 x 60 mm, 45 ppi
Replacement filters for filter cartridges, 60 x 60 mm, 45 ppi
Ersatzfilter fr Filterkassetten 80 x 80 mm, 100 ppi
Replacement filters for filter cartridges, 80 x 80 mm, 100 ppi
Verfgbarkeit auf Anfrage
Availability on request
Ersatzfilter fr Filterkassetten 92 x 92 mm, 45 ppi
Replacement filters for filter cartridges, 80 x 80 mm, 45 ppi
Ersatzfilter fr Filterkassetten 120 x 120 mm, 100 ppi
Replacement filters for filter cartridges, 120 x 120 mm, 100 ppi
Lfter Zubehr/Fan Accessories
46
-
EKL Art.-NrEKL-Part-No.
80000000051
80000000174
80000000010
80000000009
80000000052
80000000032
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
BeschreibungDescription
Lftergitter
Fan guard
Lftergitter Metall verchromt fr 40 mm Lfter
Fan guard chrome-plated metal for 40 mm fans
Lftergitter Metall verchromt fr 50 mm Lfter
Lochabstand 40 x 40 mm
Fan guard chrome-plated metal for 50 mm fans
hole distance 40 x 40 mm
Lftergitter Metall verchromt fr 60 mm Lfter
Fan guard chrome-plated metal for 60 mm fans
Availability on request
Lftergitter Metall verchromt fr 80 mm Lfter
Fan guard chrome-plated metal for 80 mm fans
Lftergitter Metall verchromt fr 92 mm Lfter
Fan guard chrome-plated metal for 92 mm fans
Lftergitter Metall verchromt fr 119/120 mm Lfter
Fan guard chrome-plated metal for 119/120 mm fans
Verfgbarkeit auf Anfrage
Lfter Zubehr/Fan Accessories
47
-
EKL Art.-NrEKL-Part-No.
80000000209
80000000188
80000000187
Steck-Lftermanschetten
Fan Sleeves
Fan guard chrome-plated metal for 60 mm fans
Steck-Lftermanschette 80 x 80 mm
fr Bleche von 0,75 - 1,5 mm
Material TPE schwarz, UL94-V-0, Hrte: ca. 70 Shore A
Fan sleeve 80 x 80 mm, for cases with 0,75 - 1,5 mm thickness
Material TPE black, UL94-V-0, hardness: ca. 70 Shore A
Steck-Lftermanschette 92 x 92 mm, fr Bleche von 0,75 - 1,5 mm
Material TPE schwarz, UL94-V-0, Hrte: ca. 70 Shore A
Fan sleeve 92 x 92 mm, for cases with 0,75 - 1,5 mm thickness
Material TPE black, UL94-V-0, hardness: ca. 70 Shore A
BeschreibungDescription
Lftergitter EMV Schutz
Fan guard EMI protection
Filterschutz-EMV Abschirmblech 060*060 mm
Edelstahl (Feder V2A), Werkstoff Nr. 1.4310
Filter guard - EMI / RFI - shield sheet, 060 x 060 mm
high-grade steel (spring V2a), material no. 1.4310
Weitere Gren auf Anfrage erhltlich!
Further dimensions available on request!
Verfgbarkeit auf Anfrage
Availability on request
Weitere Gren auf Anfrage erhltlich!
Further dimensions available on request!
Abbildungen hnlich / Illustrations similarly
EKL AG Nadlerstrae 8-10D-88299 LeutkirchTel. +49(0)7561-9837 0FAX +49(0)7561-9837 [email protected]
Lfter Zubehr/Fan Accessories
48