EJOT PT type DG The fastener for mechanical fixing of ... EJOT PT_DG 412-E.pdf · N = F v cos ß F...
Transcript of EJOT PT type DG The fastener for mechanical fixing of ... EJOT PT_DG 412-E.pdf · N = F v cos ß F...
®
N = Fv
cos ß
FR= µ . N
®
EJOT PT® type DG
Using screws on large surface aluminium/glass facades is an ongoing challenge. Technical approvals or system approach, become more important because of the structural requirements and high security standards in such constructions.
Features:
qself-tap and self-drill options in stainless steel grades A2 and A4
qasymmetrical thread flank, with a 30° thread an-gle sloped toward the bearing load
qengineered fastener core provides ideal material flow during thread forming
qhigh performance
Benefits:
qoverdrive security through asymmetrical thread flank design
qhigh pull-out and shear strength, due to large overlap of the thread flanks
qhigh resistance to vibration
The fastener for mechanical fixing of aluminium and clamp-connections, on aluminium/ glass facade systems
Typical applications:
qclamping aluminium profileqclamping aluminium cover platesq fixing mullion and transom sectionsq fixing ledge detailsqin particular; aluminium, zinc and magnesium
alloys
®
EJOT Baubefestigungen GmbH · In der Stockwiese 35 · D- 57334 Bad LaaspheTel. +49 27 52 908-740 · Fax +49 27 52 908-7408 · Internet: www.ejot.de · e-mail: [email protected]
®
EJOT Baubefestigungen GmbH · In der Stockwiese 35 · D- 57334 Bad LaaspheTel. +49 27 52 908-740 · Fax +49 27 52 908-7408 · Internet: www.ejot.com · e-mail: [email protected]
EJOT and application engineering:
qwe support our customers through an application engineering approach. Starting with the product development process
qexperienced technicians in the EJOT Applitec centre discuss the assembly of your components qas a manufacturer, EJOT have the ability to pro-
vide a technical assessment of your requirements and a subsequent bespoke solution
q we provide you with sound advice on optimal and rational fixing and installation techniques
Product outline:
qEJOT PT type DG screw is a custom-designed solution for profile construction in aluminium/glass façade applications
qavailable with different head designs, diameters, metal grades, thread length, fastener length and drive type
qin stock with Z-type or drill point, washered or un- washered
Different extrusion types in aluminium/ glass facades:
412-
E/1
.0/1
2.06