EIMARace 2011 Appendix A

1
APPENDIX A – PRESENTATION SCOPE 1. Presentation consist of two (2) disciplines 1.1. Design (300 Points) 1.1.1. Design must present component below to be evaluate: 1.1.1.1. Orthographic & others 2D Drawing 1.1.1.2. Isometric & others 3D Drawing 1.1.1.3. Brief of concept or system used in design 1.1.1.3.1. Chassis Design 1.1.1.3.2. Suspension 1.1.1.3.3. Brake 1.1.1.3.4. Engine 1.1.1.4. Other brief of concept /design will be add value for this disciplines, ex. Picture, brief of steering system, video, sketching and etc 1.2. Engineering Analysis (100 Points) 1.3. Analysis may consist any type of chassis or engine analysis 1.4. Analysis maybe a; 1.4.1.Physical testing (ex; own recorded acceleration test or brake test, etc), 1.4.2.Simulation (ex; Chassis stiffness/deformation, Engine Output by dyno test & etc) 1.4.3.Assumed Calculation (ex; maximum speed, fuel consumption & etc)

description

A

Transcript of EIMARace 2011 Appendix A

Page 1: EIMARace 2011 Appendix A

APPENDIX A – PRESENTATION SCOPE

1. Presentation consist of two (2) disciplines

1.1. Design (300 Points)

1.1.1. Design must present component below to be evaluate: 1.1.1.1. Orthographic & others 2D Drawing 1.1.1.2. Isometric & others 3D Drawing 1.1.1.3. Brief of concept or system used in design

1.1.1.3.1. Chassis Design 1.1.1.3.2. Suspension 1.1.1.3.3. Brake 1.1.1.3.4. Engine

1.1.1.4. Other brief of concept /design will be add value for this disciplines, ex. Picture, brief of steering system, video, sketching and etc

1.2. Engineering Analysis (100 Points)

1.3. Analysis may consist any type of chassis or engine analysis 1.4. Analysis maybe a;

1.4.1. Physical testing (ex; own recorded acceleration test or brake test, etc), 1.4.2. Simulation (ex; Chassis stiffness/deformation, Engine Output by dyno test & etc) 1.4.3. Assumed Calculation (ex; maximum speed, fuel consumption & etc)