EEQQUUIIPPMMEENNTT && ORIG N AL C ES...Equipment & Original ACCESSORIES Catalogue - February 2016...

Rev. 1.0

TEST AND GARAGE EQUIPMENT

TYRE CHANGERS

TYRE CHANGERS

February 2016

EEQQUUIIPPMMEENNTT &&

OORRIIGGIINNAALL AACCCCEESSSSOORRIIEESS

CATALOGUE

Rev. Feb. 1st

2

Equipment & Original ACCESSORIES Catalogue - February 2016

The pictures included in the present illustrated catalogue, are only intended to show

the product and are therefore not binding. The company reserves the right to make in every moment and without prior notice, any modification deemed necessary.

SIMPESFAIP S.p.A. declines any responsibility for any complaint coming from the use of not original accessories or spares with

consequent forfeiture of the CE conformity declaration.

3


TABLE OF CONTENTS

“LL” UNIVERSAL TYRE CHANGERS - ACCESSORIES FOR M 928 ROYAL ....................................................................... 7 - ACCESSORIES FOR M 830 LL - M 830 M .............................................................. 8 - ACCESSORIES FOR UNIVERSAL TYRE CHANGERS .......................................... 9

PASSENGER CAR TYRE CHANGERS

- COMPLEMENTARY EQUIPMENT FOR CAR TYRE CHANGERS ..................................... 15 - ACCESSORIES FOR PASSENGER CAR TYRE CHANGERS .............................. 17

MOTORCYCLE TYRE CHANGERS - ACCESSORIES FOR MOTORCYCLE TYRE CHANGERS ................................... 22

HEAVY-DUTY TYRE CHANGERS - ACCESSORIES FOR HEAVY-DUTY TYRE CHANGERS ...................................... 28

PACKING SPECIFICATIONS - DIAGRAM OF PACKING SPECIFICATIONS...................................................................... 32

4


“LEVER-LESS” TYRE CHANGERS

All models supplied with: 1 Complete universal locking pistol 1 Wheel centering cones set 1 Pair of PPT plastic bead clamp 3 Plastic rim protections 2 Bead protection plastic lever 1 Set of plastic inserts for tool head 1 Brush for bead lubrication

1 Operator’s manual

MM 992288 Royal Royal

MM 883300 LLLL

All models supplied with: 1 Complete universal locking pistol 1 Wheel centering cones set 1 Pair of PPT plastic bead clamp 3 Plastic rim protections 2 Bead protection plastic lever 1 Set of plastic inserts for tool head 1 Brush for bead lubrication


MM 882244 LLLL

All models supplied with: 1 Plastic cover for bead breaker

blade 1 Set of 4 jaw pads for alloy rims 1 PPT plastic bead clamp 3 Plastic rim protections 2 Bead protection plastic lever 1 Set of plastic inserts for tools head 1 Brush for bead lubrication 1 Operator’s manual

5


“L-L” TYRE CHANGER - MOBILE SERVICE

Accessories for MOBILE SERVICE

PN

8-5110.00.38

Power Unit components kit for MOBILE SERVICE.

Kit comprising: 1 Battery pack, 1 Battery charger 48V, 1 48V- 6 kW Inverter, 1 12V-1,5 kW Inverter, 1 Warning remote control inverter status, 1 80 l Air reservoir, 1 Rotary compressor

MM 883300 MM

All models supplied with: 1 Complete universal locking pistol 1 Wheel centering cones set 1 Pair of PPT plastic bead clamp 1 Set of plastic inserts for tool head 1 Brush for bead lubrication


6


DIAGRAM OF ACCESSORIES FOR “LEVER-LESS” TYRE CHANGERS

REFERENCE

PAGE M 928 ROYAL M 830 LL M 830 M

M 824 2V FS LL M 824 LL

INFLATING DEVICE

KFS 28 8-1110.01.60 7

KFS 30 8-1110.01.11 8

EFS70/W 8-11400058 19

EFS70/M 8-11400050 19

COMPLEMENTARY ACCESSORIES PH 28 8-1110.01.28 7

PH 30 8-1110.00.97 8

SA 28 8-1110.01.59 7

SA 30 8-1110.00.89 8

WDK RETROFIT 8-1110.01.89 7

KP 30 8-1110.01.18 8

KRPS 30 801.260235 8

PST 8-1110.03.68 11

DRT 8-1110.01.25 11

PPT 801.262417 10

DRT 24 8-1110.02.96 11

WHEEL LIFTERSKWL 30 8-1110.00.85 8

KWL80 8-11100243 19

CENTERING ACCESSORIES FOR UNIVERSAL MODELS AUTOLOCK II 8-1110.02.87 9

KPBM 8-1110.04.00 9

KCF 28 8-1110.00.86 9

FCR 28 8-1110.00.39 9

KPC 12 8-1110.02.84 9

KE 28 8-1110.00.46 9

KE 20 8-1110.02.44 10

KE 40 8-1110.02.45 10

KE 25 8-1110.02.46 10

KEA 28 8-1110.02.91 10

FU 28 8-1110.00.87 10

RIM PROTECTING COVERS AND PADS PTS 8-11120013 (*) 10

REP-3 8-11120014 (*) 11

REP-3S 8-11120015 (*) 11

KPP-LL 8-11400293 (*) 11

PCL54 8-11100044 (*) 20

GPS60 801.258383 (*) 21

* : Compatible protective pads are supplied also as standard.

7


Accessories for M 928 ROYAL

PN

8-1110.01.60

KFS 28 Tubeless inflating device with “top-down-shot” system.

8-1110.01.28

PH 28 Adjustable bead pressing arm. Particularly suitable for low-profile tyres. WDK Approved.

8-1110.01.59

SA 28 Accessory holder support.

8-1110.01.89

WDK RETROFIT Kit for retrofitting previously purchased machines. Kit comprising: - 1 WDK type-approved seal - 1 Bead pressing tool for PH28 - 1 PPT bead clamp - 3 Plastic rim protections - 3 Short plastic rim protections - 1 Bead protection plastic lever - 1 Approved WDK guidelines CD-Rom - 1 Spare parts manual

8


Accessories for M 830 LL - M 830 M

PN

8-1110.01.11

KFS 30 Tubeless inflating device with “top-down-shot” system.

8-1110.00.97

PH 30 Adjustable bead pressing arm. Particularly suitable for low-profile tyres. WDK Approved.

8-1110.00.85

KWL 30 Pneumatic wheel lifter device.

8-1110.01.18

801.260235

KP 30 PAX System kit.

KRPS 30 Kit of 10 reglette for PAX System.

8-1110.00.89

SA 30 Accessory holder support.

9


Accessories for UNIVERSAL TYRE CHANGERS

PN

8-1110.02.87

AUTOLOCK II Electric rim clamping and releasing handle, easy to use and rechargeable. Lithium ion battery. Complete with: 1 Clamping handle 2 Batteries 1 Battery charger. 1 Extension for projecting rims.

8-1110.04.00

KPBM Manual locking protection kit. Complete with: 3 Protection caps for cone D. 120 mm. 2 Cones D. 74 mm 2 Cones D. 58 mm. 1 Bead protection plastic lever 1 Handle extension. 5 Protections

8-1110.00.86

KCF 28 Pick-up rim kit.

8-1110.00.39

FCR 28 Reverse wheel flange.

8-1110.02.84

KPC 12 Set of 12 plastic protective caps to put on the FCR 28 flange bolts (PN 8-1110.00.39).

8-1110.00.46

KE 28 Extension kit for flange FCR 28 and FU 28. (To be used with PN 8-1110.00.39 and 8-1110.00.87 only).

10


PN

8-1110.02.44

KE 20 Set of 6 “SHORT” extensions (-20 mm.) for flange FCR 28. To reduce the distance between the wheel to the mounting surface on the reverse rim flange by 20 mm and reduce flexing. (To be used with PN 8-1110.00.39).

8-1110.02.45

KE 40 Set of 6 “SHORT” extensions (-40 mm.) for flange FCR 28. To reduce the distance between the wheel to the mounting surface on the reverse rim flange by 40 mm and reduce flexing. (To be used with PN 8-1110.00.39).

8-1110.02.46

KE 25 Set of 6 “LONG” extensions (+25 mm.) for flange FCR 28. To increase the distance between the wheel to the mounting surface on the reverse rim flange by 25 mm (increasing space between wheel surface and flange). (To be used with PN 8-1110.00.39).

8-1110.02.91

KEA 28 Set of 6 spherical extensions for new AUDI wheels for flange FCR 28. For use with wheel fastener holes with spherical seat (specifically requested by Audi). (To be used with PN 8-1110.01.39).

8-1110.00.87

FU 28 Universal flange for closed centre and special rims.

801.262417

PPT

Bead clamp. For “Run Flat” tyres. WDK Approved.

8-1112.00.13

PTS

Bead protection plastic lever.

11


PN

8-1112.00.14

REP-3

Kit of 3 plastic rim protections.

8-1112.00.15

REP-3S

Kit of 3 short plastic rim protections.

8-1140.02.93

KPP-LL

Kit of plastic inserts for “LEVER-LESS” tool head. Complete with: 10 Tool head inserts. 5 Tool head inserts for tail coverage. 15 Scews. M 4 x 6

8-1110.01.25

DRT

Template for “LEVER-LESS” tool head adjustment. For Technical support Centres only

8-1110.02.96

DRT 24 Template for “LEVER-LESS” tool head adjustment. For Technical support Centres only.

8-1110.03.68

PST

Shutter tyre device. Can only be used in matching with PH 28 and PH 30 devices.

12



MM 662244 sseerriieess

All models supplied with: 1 Bead lever 1 Set of 4 jaw pads for alloy rims (front/rear type) 1 Plastic cover for bead breaker blade 1 Plastic cover for bead lever 1 Set of plastic inserts for tools head (Additional) 1 Brush for bead lubrication 1 Operator’s manual


All models supplied with: 1 Bead lever 1 Set of 4 jaw pads for alloy rims (front/rear type) 1 Plastic cover for bead breaker blade 1 Plastic cover for bead lever 1 Set of plastic inserts for tools head (Additional) 1 Brush for bead lubrication 1 Operator’s manual


All models supplied with: 1 Bead lever 1 Set of 4 jaw pads for alloy rims (front/rear type) 1 Plastic cover for bead breaker blade 1 Plastic cover for bead lever 1 Set of plastic inserts for tools head (Additional) 1 Brush for bead lubrication 1 Operator’s manual 1 BAR/PSI Inflating gun (*)

*: Supplied for M 424 2V and M 424 models only.

13


MM 332222 FFSS

All models supplied with: 1 Bead lever 1 Set of plastic inserts for tools head (Additional) 1 Brush for bead lubrication 1 Operator’s manual

MM 332222

All models supplied with: 1 Bead lever 1 Set of plastic inserts for tools head (Additional) 1 Brush for bead lubrication 1 Operator’s manual 1 BAR/PSI Inflating gun

14


DIAGRAM OF ACCESSORIES FOR TRADITIONAL CAR TYRE CHANGER

REFERENCE

PA

GE

M 6

24 2

V F

S

M 6

24 F

S

M 6

24

M 5

22 2

V F

S

M 5

22 F

S

M 5

22 2

V

M 5

22

M 4

24 2

V F

S

M 4

24 F

S

M 4

24 2

V

M 4

24

M 3

22 F

S

M 3

22

INFLATING GUNS

PGM 801.276833 19

PGE 801.281796 19

PGM2 801.281797 19

PGE2 801.271621 19

ACCESSORIES FOR 4 / 5 / 6 SERIES ONLY ALLY 80 8-11400211 17

HSR 8-11400237 (*) 17

ALLY 60 8-11400002 17

BPA 5-400395 (**) 17

PT70 5-400396 (**) 17

ALLY 85 8-11200003 18

ALLY 30 8-11100343 18

EFS70/A 8-11400055 (*) 18

EFS70/M 8-11400050 18

KWL80 8-11100243 19

ADAPTERS GA69 8-11100042 20

GA524 8-11100041 20

GM520 8-11100036 20

PS60 801.260402 20

RIM PROTECTING COVERS AND PADS PCL54 8-11100044 (***) 20

KGL6 801.246241 (***) 20

PS10 801.254341 20

PTH5 801.258898 (***) 20

PTS60 801.458663 20

GPS60 801.258383 (***) 21

REP-3 8-11120014 (***) 21

REP-3S 8-11120015 (***) 21

ACCESSORIES FOR ALL MODELS TCT 35 0-1110.92.01/90 15

TPM-02 0-5120.01.01 15

Kit EOBD 8-5112.00.02 15

PPT 801.262417 19

PTR 8-11400290 19

TCL40 801.250309 21

TS610 801.252083 21

RS 8-11100014 21

KSR 8-11100051 21

IS 8-11100054 21

UPT 801.435685 19

EFS70/W 8-11400058 19

PWR 8-11120028/90 21

* : Accessory for ALLY 80. ** : Accessory for ALLY 60.

*** : Protective pads are supplied as standard on all models ( M 322 FS and M 322 excluding).

: Supplied as standard on these models The designation is for spare parts requests.

15


Complementary equipment for CAR TYRE CHANGERS

PN

0-1110.92.01/90

8-1110.02.42

TCT 35 Tyre commuter trolley for the wheel passage from the tyre changer to the balancer. For wheels having diameter up to 900 mm. (35").

Customization set

0-5120.01.01

TPM-02 TPMS (Tyre Pressure Monitor System) Diagnostic and Reprogramming Tool. Supplied with:

- Charging adapter, - USB cable - CD-ROM.

The TPM-02 is supplied with ONE YEAR update INCLUDED. The user will be enabled and managed by the portal "Infoauto" of our web site:

www.simpesfaip.it/infoauto

8-5112.00.02

EOBD Kit Sensor reprogramming OBD kit for TPM-02. The EOBD kit is supplied with ONE YEAR update INCLUDED. The user will be enabled and managed by the portal "Infoauto"

of our web site:


0-5120.02.01

TPM-02 + Kit EOBD TPMS (Tyre Pressure Monitor System) Diagnostic and Reprogramming Tool.

The kit is supplied with ONE YEAR update INCLUDED.

The user will be enabled and managed by the portal "Infoauto"

of our web site:


8-5110.00.35

Bluetooth printer for TPM-02.

Colour version: RAL 9005

http://www.simpesfaip.it/infoauto



16


8-5110.00.36

USB/RS232 Cable for printer TPM-02.

8-5110.00.36

Barcode reader for TPM-02.

8-5110.00.29

8-5112.00.03

8-5112.00.01

8-5112.00.04

TPM-02 standard annual subscription.

TPM-02 extended annual subscription (*).

TPM-02 + EOBD annual subscription.

TPM-02 + EOBD extended annual subscription (*). The user will be enabled and managed the subscriptions by the

portal "Infoauto" of our web site:


* : Special Subscriptions for those who do not perform the update within 7 months since the last expiry


17


Optional accessories for PASSENGER CAR TYRE CHANGERS

PN

8-1140.02.11

ALLY 80 Universal bead lifting / pressing accessory. For all tyre changers with tilting post. Particulary conceived to handle low profile and “Run Flat ” tyres. Designed in order to handle also all PAX SYSTEM MICHELIN and BRIDGESTONE or CONTINENTAL SR System tyres (When equipped with respective ones optional kit). WDK Approved. Supplied with

- additional adjustable bead pressing. - pair of pressing cones (for holes from 40 to 134 mm). - pressing extension for “reverse” rims.

8-1140.02.37

HSR

Accessory for ALLY 80. To correctly handle BRIDGESTONE and CONTINENTAL SR System wheels.

8-1140.00.60

ALLY 60 Universal bead lifting / pressing accessory. For all tyre changers with tilting post.

5-400395

BPA Bead pressing arm for ALLY 60. Additional bead pressing suitable for low profile and “Run Flat ” tyres.

5-400396

PT70 Cone pressing extension for “reverse” rims. Suitable for: ALLY 60.

18


PN

8-1120.00.03

ALLY 85 Bead lifting/pressing multipurpose device. Particulary conceived to handle low profile and “Run Flat ” tyres. Right side installation. Suitable for: M 424 Series only. WDK Approved.

8-1110.03.43

8-1110.03.63

8-1112.00.01

ALLY 30 Bead lifting/pressing multipurpose device, with three tool arms. Particulary conceived to handle low profile and “Run Flat ” tyres. Right side installation. Customization and installation kit. Suitable for: M 624 and M 522 Series.

Customization and installation kit. Suitable for: M 424 Series.

8-1140.00.55

EFS70/A

Electronic tyre inflating device. To be fitted on tyre changer supplied with ALLY 80.

8-1140.00.50

EFS70/M

Electronic tyre inflating device. To be fitted on tyre changer.

19


PN

8-1140.00.58

EFS70/W

Suitable for wall installation. (Independent from the tyre changer).

8-1110.02.43

KWL80 Pneumatic wheel lifting device. Capacity: 80 kg. To be fitted on tilting back tyre changer.

801.276833

PGM

Michelin tyre inflating gun with BAR scale on pressure gauge. EC Homologated.

801.281796

PGE

Economic tyre inflating gun with BAR scale on pressure gauge. EC Homologated.

801.281797

PGM2

Michelin tyre inflating gun with both BAR and PSI scales on pressure gauge. For extra EC countries only.

801.271621

PGE2

Economic tyre inflating gun with both BAR and PSI scales on pressure gauge. For extra EC countries only.

801.262417

PPT

Bead clamp. For “Run Flat” tyres. WDK Approval.

801.435685

UPT

Universal bead clamp.

8-1140.02.90

PTR

Roller bead pressing device for “Run Flat” and UHP tyres. In absence of lateral “Help”.

20


PN

8-1110.00.42

GA69 Set of adapters for 8”÷9” rims. (Can lock from outside rims until 6”).

8-1110.00.41

GA524

Set of adapters for increasing outside locking of 4” (alloy rims).

8-1110.00.36

GM520

Set of motorcycle wheel adapters. From 15” to 23”/25”.

801.260402

PS60

Special bead breaker blade for motorcycle wheels.

8-1110.00.44

PCL54

Set of 12 integral plastic jaws pads for protecting alloy rims. Outside/Inside locking.

801.246241

KGL6

Kit of 6 plastic covers for tyre lever to protect alloy rims.

801.254341

PS10

Set of 10 special plastic inserts for tool head.

801.258898

PTH5

Set of 5 special plastic pads for tool head.

801.458663

PTS60

Plastic cover for side bead breaker pad to protect alloy rims during tyre bead breaking.

21


PN

801.258383

GPS60

Set of 6 plastic covers for bead breaker blade to protect alloy rims during tyre bead breaking.

801.250309

TCL40

Plastic tool head set to protect alloy rims during tyre mounting and demounting.

801.252083

TS610

Tool head set for wheels from 6" to 10". Specially designed for scooters and small wheels.

8-1110.00.14

RS

Tool head set. Specially designed for rims with outstanding spokes.

8-1110.00.51

KSR

Quick release device with two adapters for demounting/mounting tool. (terminal + two adapters).

8-1110.00.54

IS

Additional adapter for demounting/mounting tool. (To be used with PN. 8-1110.00.51).

8-1112.00.14

REP-3

Kit of 3 plastic rim protections.

8-1112.00.15

REP-3S

Kit of 3 short plastic rim protections.

8-1112.00.28/90

PWR Roller board kit for bead breaker. To fix to the floor.

22


MOTOCYCLE TYRE CHANGERS

Accessories for MOTORCYCLE TYRE CHANGERS

PN

8-1160.00.20

PPM

Set of 6 plastic covers for bead breaker blade to protect alloy rims during tyre bead breaking.

8-1160.01.16

SR

Wheel holder arm set.

8-1160.01.17

PR

Roller for fitting wheels smaller than 8” .

8-1160.01.18

UCA

Set of 4 adapters for cross wheels.

MM 220000 BBIIKKEE

All models supplied with: 1 Bead lever 1 Plastic cover for bead lever 1 Plastic cover for bead breaker blade 1 Set of 4 plastic adapters for go-kart wheels 1 Set of plastic inserts for tools head (Additional) 1 Brush for bead lubrication 1 Operator’s manual

23


PN

8-1160.01.19

ATV A

Set of 4 adapters for ATV wheels (From 6” to 16”).

8-1160.01.20

ATV C

Centering cone for ATV wheels (only with SR wheel holder arm).

8-1160.01.21

CKM

Set of 4 clamping jaws.

8-1160.01.22

GKS

Set of plastic covers.

8-1160.01.23

GK

Set of 4 adapters for go-kart wheels.

8-1160.01.24

PO

Tray.

8-1160.01.25

TG1 1 kg. lubrication grease bucker.

8-1160.01.26

IG

Tyre inflating gun with BAR scale on pressure gauge. EC Homologated.

24


HEAVY-DUTY TYRE CHANGERS

FF 556622

Supplied with: 1 Extensions kit 56” (4 pcs) 1 Bead lifting lever 1 Rim ring lever 1 Rim clamp 1 Operator’s manual

Supplied with: 1 Extensions kit 56” (4 pcs) 1 Bead lifting lever 1 Rim ring lever 1 Rim clamp 1 Operator’s manual

FF 556600 AA -- FF 556600

SSppeecciiaall

FF 556600 -- FF 556600 AA

SSppeecciiaall YY

Supplied with: 1 Bead lifting lever 1 Rim ring lever 1 Rim clamp 1 Set of 4+4 special

plastic inserts for jaw 1 Operator’s manual

25




FF 556600 AA

FF 556600

FF 226600





26


Supplied with: 2 Rollers for tubeless

1 Bead levering tool 1 Bead lifting lever 1 Rim clamp 1 Operator’s manual.

Supplied with: 1 Bead lever for cars 1 Bead lifting lever 1 Rim ring lever 2 Plastic covers for bead lever 1 Series of locking adapters

for alloy rims 1 Accessory for cars and vans 1 Rim clamp 1 Brush

1 Manual lube pump 1 Operator’s manual.

FF 222266 MMoobbiillee

FF 224400 AA

Supplied with: 1 14.5" to 17.5" cone and flange 1 19.5" to 24.5" cone and flange 1 Bead-breaking roller 1 Ring nut for securing wheel 1 Rim clamp 1 Angle brush 1 Operator’s manual.

FF 224400

27


DIAGRAM OF ACCESSORIES FOR HEAVY-DUTY TYRE CHANGERS

REFERENCE PAGE

F 5

62

F 5

60 A

- F

560

S

pec

ial

F 5

60 A

- F

560

S

pec

ial Y

F 5

60 A

F 5

60

F 2

60

F 2

40 A

F 2

40

F 2

26

Mo

bile

RC2.4 8-1240.00.12 28

SGP 8-1210.00.26 28

RT50/2 801.271609 28

RT56 801.280918 28

RT 19120014 28

RT56 Y 19120016 28

MV50/2 801.271597 28

GL4V 8-1210.01.56 28

KGL56 8-1210.01.75 28

PL56 801.227195 29

PA4V 8-1210.01.55 29

P4P 8-1210.0.171 29

SPIG 8-1210.01.72 29

PS56 801.280917 29

LG56 801.280916 29

AB161 8-1210.00.07 29

AB164 8-1210.00.05 29

AB176 8-1210.00.06 29

AB202 8-1210.00.08 29

AB220 8-1210.00.01 29

AB221 8-1210.00.09 29

AB281 8-1210.00.10 29

LA24 801.217615 (*) 30

LC24 801.417620 30

PA26 8-1210.0.176 30

PCL26 801.254494 30

RT24 801.289439 (***) 30

UB24 801.289440 (**) 30

DS24 801.289441 30

LB24 801.289443 30

K4V58 8-1210.01.59 31

K4V56 8-1210.01.58 31

K4V26 8-1210.01.57 31

DS226 8-1210.01.57 31

BP 120 8-1210.00.17 31

SGG 8-1140.00.34 31

AC24 801.289442 31

GRD46 802.443938 31

* : As accessory standard for all models (escluded F 240).

** : As accessory standard for F 240 A.

*** : As accessory standard for F 240 A and F 240.

28


Accessories for HEAVY-DUTY TYRE CHANGERS

PN

8-1240.00.12

RC2.4 2.4 Ghz multichannel radio remote control. It can operate up to 8 tyre changers connected simultaneously via radio, setting the appropriate available channels.

Available for: F 562 and F 561 2010.

8-1240.00.13

RC2.4 2.4 Ghz multichannel radio remote control. It can operate up to 8 tyre changers connected simultaneously via radio, setting the appropriate available channels.

Available for: F 561 2010.

8-1210.00.26

SGP Remote control kit Available for: F 560 A Special - F 560 A Special Y.

801.271597

MV50/2 Pair of bead clamps.

801.271609

801.280918

RT50/2 Roller for tubeless.

RT56 Roller for tubeless.

19120014

19120016

RT Roller for tubeless.

RT56 Y Roller for tubeless with bearings. High performance.

8-1210.01.56

GL4V

Set of 4 alloy rim clamps for new “4V” self-centering chuck.

8-1210.01.75

KGL56

Set of 4 alloy rim clamps for self-centering chuck.

29


PN

801.227195

PL56

Clamp for alloy rims.

8-1210.01.55

PA4V

Set of 4 extensions for new “4V” self-centering chuck.

8-1210.01.71

P4P

Set of four 4-point extensions for wheel with side ring.

8-1210.01.72

SPIG

Set of 8 + 8 plastic inserts for new “4V” steel clamps.

801.280917

PS56

Additional platform.

801.280916

LG56

Bead guide lever.

8-1210.00.07

8-1210.00.05

8-1210.00.06

8-1210.00.08

8-1210.00.01

8-1210.00.09

8-1210.00.10

AB161

Locking adapter for alloy rims Ø 161 mm.

AB164


AB176


AB202


AB220

Locking adapter for alloy rims Ø 220 mm

AB221


AB281


30


PN

801.217615

LA24 Bead lifting lever.

801.417620

LC24 Rim ring lever.

8-1210.01.76

PA26 Set of four chuck extensions.

801.254494

PCL26 Set of four alloy rim protections.

801.289439

RT24 Roller for tubeless.

801.289440

UB24 Bead levering tool.

801.289441

DS24 Bead breaking disk.

801.289443

LB24 Large rim board.

31


PN

8-1210.01.59

8-1210.01.58

8-1210.01.57

K4V58 Set of clamps 4V to retrofit heavy duty tyre changers. Suitable for: F 562 - F 561.

K4V56 Set of clamps 4V to retrofit heavy duty tyre changers. Suitable for: F 560 - F 560 A.

K4V26 Set of clamps 4V and connecting rods to retrofit heavy duty tyre changers. Suitable for: F 260.

8-1210.00.30

DS226 Bead breaking disk for rim ring. Suitable for: F 226 Mobile.

8-1210.00.17

BP 120 Air operated bead presser device.

8-1140.00.34

SGG Tyre paste container with brush (4 kg).

801.289442

AC24 Self-centering device; clamps wheels devoid of central flange. Supplied with wrench, can be used on wheels with 20" to 24.5" diameter.

802.443938

GRD46 Quick ring nut for securing wheel.

32



Model Packing type Dimensions (cm.) (A x B x H)

Net weight (kg)

Gross weight (kg)

M 928 ROYAL Wooden case (A) 154x114x190 400 490

M 830 LL+KWL “ 132x 76x183 310 335

M 824 2V FS LL “ 90x115x 97 262 292

M 824 LL + ALLY 90 “ 114x100x188 270 300

M 624 2V FS “ 99x112x102 245 275

M 624 “ 99x112x102 235 265

M 522 2V FS “ 99x112x102 260 290

M 522 FS “ 99x112x102 235 265

M 522 2V “ 99x112x102 225 255

M 522 “ 99x112x102 225 255

M 424 2V FS “ 106x 76x 97 225 255 M 322 FS “ 84x114x 99 208 235 M 322 “ 84x114x 99 198 225 M 200 BIKE Carton box on pallet base 95x115x108 155 175 ALLY 60 Accessory Carton box on pallet base 83x134x 34 75 85 ALLY 80 Accessory Wooden case (A) 47x154x 45 105 120 ALLY 30 Accessory * Carton box on pallet base 82x120x 42 70 110 ALLY 30 Accessory ** Carton box on pallet base 53x120x 42 70 110

* : Accessory with preassembled arm. ** : Accessory without preassembled arm.

HEAVY-DUTY TYRE CHANGERS

Model Packing type Dimensions (cm.) (A x B x H)

Net weight (kg)

Gross weight (kg)

F 562 Wooden case (B) 272x231x105 1410 1610 F 560 A “ 212x192x110 750 910 F 560 “ 200x172x103 740 870 F 260 “ 200x172x103 510 640 F 240 A “ 193x 76x109 500 540 F 240 “ 193x 76x109 420 460

DIAGRAM OF PACKING SPECIFICATIONS

A

B

H

B A

33


34


35


36


MESF0

001

45

B -

02

/16

- ED

IT D

EP

T

COMPANY WITH CERTIFIED

QUALITY SYSTEM

- ISO 9001 -

SIMPESFAIP S.p.A. - Engineering, Test and Garage Equipment - A Nexion Group Company -

Via Dinazzano, 4 - 42015 Prato di Correggio (RE) Italy - Tel. 0522/736087 - Fax 0522/736716 (Export Dpt)

www.hpa-faip.it - e-mail:[email protected]

EEQQUUIIPPMMEENNTT && ORIG N AL C ES...Equipment & Original ACCESSORIES Catalogue - February 2016...

Documents

Transcript of EEQQUUIIPPMMEENNTT && ORIG N AL C ES...Equipment & Original ACCESSORIES Catalogue - February 2016...