EECS340 Recitation 2: Very helpful to your project Hongyu Gao 1.
-
Upload
gary-lyons -
Category
Documents
-
view
212 -
download
0
Transcript of EECS340 Recitation 2: Very helpful to your project Hongyu Gao 1.
EECS340 Recitation 2: Very helpful to your project
Hongyu Gao
1
Warming-up Questions
If you don’t know your IP address, dig into the old announcement in
the newsgroup
2
3
Roadmap
How to run Minet stack Hints for project 2
4
Need X-server if running remotely
Xming for Windows
5
Script to run Minetstart_minet.sh somehow doesn’t work properly for me.
Use run_modules.sh instead.
Remember to set variable MINET_IPADDR and MINET_ETHERNETADDR in minet.cfg or run_modules.sh, depending on which script you use.
6
Connect to tcp_server with nc
7
Script to stop Minet
./stop_minet.sh
8
Roadmap
How to run Minet stack Hints for project 2
9
File to Modify
src/core/tcp_module.cc
Implement your TCP in this file
10
Refer to udp_module.cc
How to pass data to application layer (sockets)?How to receive data from application layer (sockets)?How to pass data to IP layer?How to receive data from IP layer?
MinetSend() and MinetReceive()
11
Understand TCP Protocol!
12
Sneak Peek: Talk with IP Layer
pt2DFIPFunction DFIPFuncArray[NUM_TCP_STATES] = { &DFIPNull, // CLOSED &DFIPNull, // LISTEN *DFIPListen is not dispatched from this table* &DFIPSynRcvd, // SYN_RCVD &DFIPSynSent, // SYN_SENT &DFIPSynSent1, // SYN_SENT1 &DFIPEstablished, // ESTABLISHED &DFIPSendData, // SEND_DATA &DFIPCloseWait, // CLOSE_WAIT &DFIPFinWait1, // FIN_WAIT1 &DFIPClosing, // CLOSING &DFIPLastAck, // LAST_ACK &DFIPFinWait2, // FIN_WAIT2 &DFIPTimeWait // TIME_WAIT };
13
Sneak Peek: Talk with Sockets
pt2DFSOCKFunction DFSOCKFuncArray[NUM_SOCK_TYPES] = { &DFSOCKConnect, // CONNECT &DFSOCKAccept, // ACCEPT &DFSOCKWrite, // WRITE &DFSOCKForward, // FORWARD &DFSOCKClose, // CLOSE &DFSOCKStatus // STATUS };
14
Please make your code well-commented
Next, some slides that previous TAs gave to the previous students…
What to do in muxHandler()?
(starting from line 50)
From Anonymous TA1
Get the headers
Use function MinetReceive to get the packet p.
Get the TCPHeader and IPHeader of p. You can use the function in class
Packet. For example, FindHeader function. You can get the Tcpheader by using p.FindHeader(Headers::TCPHeader);
Find the connections
Extract information from the IPHeaders and TCPHeaders. For example, src ip & port and dest ip &port. For example, using iph.GetDestIP function.(suppose iph is the ip header)
Use the information above to find the connection the packet belongs in Clist.
Clist is used for keeping all connections built. For example, using ConnectionList<TCPState>::iterator cs = clist.FindMatching(c);// Specify c with src & dest information
Parse tcp header
Get the state of current connection. You may need to modify it based on the packet received. For example, using (*cs).state.GetState();
Get the flags of TCP header, using tcph.GetFlags(f). Then check whether it is SYN, ACK, FIN.. And do corresponding action based on current state.
For Example
if( IS_ACK(f) && IS_SYN(f) ) { cout<<"SYN ACK packet Received. will have to send ACK packet"<<endl; p.Print(cout); if( state == SYN_SENT ) { connstate.state.SetState(ESTABLISHED); unsigned int newack,last_recvd; tcph.GetAckNum(newack); tcph.GetSeqNum(last_recvd); connstate.state.SetLastAcked( newack ); connstate.state.SetLastRecvd( last_recvd ); connstate.timeout=Time() + ACK_TIMEOUT;
char *data1 = "ACTIVE:in active connection\n"; Buffer b(data1,strlen(data1)); Packet psh; unsigned int old_time; TCPOptions opt; tcph.GetOptions(opt); old_time = ntohl(*(int *)(opt.data+8)); craftSynPacket(&psh,connstate,PSH_ACK_HEADER,0,old_time); psh.Print(cout); MinetSend(mux,psh); connstate.state.SetLastSent(connstate.state.GetLastSent()); status=STATUS; MinetSend(sock,write); } }
Netprog: TCP Details 21
TCP Details
Introduction to Networking
From Anonymous TA2
Netprog: TCP Details 22
The TCP ProjectImportant Handouts:
Minet The Minet Technical Report The Minet Socket Interface
TCP Guides RFC 793 http://www.freesoft.org/CIE/RFC/793/ (in
convenient HTML format), RFC 1122 http://www.faqs.org/rfcs/rfc1122.html
A very useful summary and picture of the TCP State diagram (TCP_IP_State_Transition_Diagram.pdf)
TCP, UDP and IP pocket guide (TCP_UDP_IP_packet_guide.pdf) includes header details
Brief overview of TCP (http://www.freesoft.org/CIE/Topics/83.htm) contains a nice summary of the essentials
Here is a page with nice TCP animations (http://www.netbook.cs.purdue.edu/). They explain TCP connection startup, termination, data flow and flow control and cumulative ack concepts.
Netprog: TCP Details 23
TCP Lingo
When a client requests a connection, it sends a “SYN” segment (a special TCP segment) to the server port.
SYN stands for synchronize. The SYN message includes the client’s ISN.
ISN is Initial Sequence Number.
Netprog: TCP Details 24
More... Every TCP segment includes a
Sequence Number that refers to the first byte of data included in the segment.
Every TCP segment includes a Request Number (Acknowledgement Number) that indicates the byte number of the next data that is expected to be received. All bytes up through this number have
already been received.
Netprog: TCP Details 25
And more...
There are a bunch of control flags: URG: urgent data included. ACK: this segment is (among other things)
an acknowledgement. RST: error - abort the session. SYN: synchronize Sequence Numbers
(setup) FIN: polite connection termination.
Netprog: TCP Details 26
And more...
MSS: Maximum segment size (A TCP option)
Window: Every ACK includes a Window field that tells the sender how many bytes it can send before the receiver will have to toss it away (due to fixed buffer size, “flow control”).
Netprog: TCP Details 27
TCP Connection Creation
A server accepts a connection. Must be looking for new connections!
A client requests a connection. Must know where the server is!
Netprog: TCP Details 28
Client Starts
A client starts by sending a SYN segment with the following information: Client’s ISN (generated pseudo-randomly) Maximum Receive Window for client. Optionally (but usually) MSS (largest
datagram accepted). No payload! (Only TCP headers)
Netprog: TCP Details 29
Sever Response When a waiting server sees a new
connection request, the server sends back a SYN segment with: Server’s ISN (generated pseudo-randomly) Request Number is Client ISN+1 Maximum Receive Window for server. Optionally (but usually) MSS No payload! (Only TCP headers)
Netprog: TCP Details 30
Finally
When the Server’s SYN is received, the client sends back an ACK with: Request Number is Server’s ISN+1
Netprog: TCP Details 31
Client Server
SYNISN=X
SYNISN=X
1
SYNISN=Y ACK=X+1
SYNISN=Y ACK=X+1
2
ACK=Y+1ACK=Y+1 3
time
Netprog: TCP Details 32
Why 3-Way?
Why is the third message necessary?
HINTS: TCP is a reliable service. IP delivers each TCP segment. IP is not reliable.
Netprog: TCP Details 33
TCP Data and ACK
Once the connection is established, data can be sent.
Each data segment includes a sequence number identifying the first byte in the segment.
Each segment (data or empty) includes a request number indicating what data has been received.
Netprog: TCP Details 34
TCP Buffers
Both the client and server allocate buffers to hold incoming and outgoing data The TCP layer does this.
Both the client and server announce with every ACK how much buffer space remains (the Window field in a TCP segment).
Netprog: TCP Details 35
Send Buffers
The application gives the TCP layer some data to send.
The data is put in a send buffer, where it stays until the data is ACK’d. it has to stay, as it might need to be sent
again! The TCP layer won’t accept data from
the application unless (or until) there is buffer space.
Netprog: TCP Details 36
ACKs
A receiver doesn’t have to ACK every segment (it can ACK many segments with a single ACK segment).
Each ACK can also contain outgoing data (piggybacking).
If a sender doesn’t get an ACK after some time limit (MSL) it resends the data.
Netprog: TCP Details 37
Termination
The TCP layer can send a RST segment that terminates a connection if something is wrong.
Usually the application tells TCP to terminate the connection politely with a FIN segment.
Netprog: TCP Details 38
FIN
Either end of the connection can initiate termination.
A FIN is sent, which means the application is done sending data.
The FIN is ACK’d. The other end must now send a FIN. That FIN must be ACK’d.
Netprog: TCP Details 39
App1 App2
FINSN=X
FINSN=X
1
ACK=X+1ACK=X+12
ACK=Y+1ACK=Y+1 4
FINSN=Y
FINSN=Y
3..
.