专题信息咨询 - nwpu.edu.cntushuguan.nwpu.edu.cn/tuqing2012-1.doc · Web...

专题信息咨询

图书情报专题研究

最新学科研究热点与前沿

2012年第1期

西北工业大学图书馆

2012年4月

前言

《图书情报专题研究》的宗旨是为我校师生开展学术研究提供有价值的参考信息。此项工作由图书馆信息咨询与情报研究部承担，根据学校所购买的数字资源，通过分析其深层次的功能，从数据库中组织整理出了与我校学科领域相关的最新学科热点研究论文、最新研究前沿及最新国际会议信息等，以期能对我校师生开展学术研究、项目立项、开题等学术研究活动提供帮助。

本期，我们收集整理了如下九个方面的热点文献和前沿信息：

1.最新热点研究论文（New Hot Papers），由汤姆森科技公司统计的22个学科1997至2012年引用率最高的高被引论文列表，是由每年各领域中被引用率最高的前1％的文献构成，每两个月按照当前引文数据进行更新，包括新进入前1%的论文。这些文献描述了新近在科学研究上有价值的发现和进展，并开始引起学术界的关注。

2.最新研究前沿（Fast Moving Fronts），由汤姆森科技公司统计的22个学科的最新研究领域，一个新的研究领域是由那些并没有在之前任何领域出现过的核心论文组成，所列举出来的研究领域都是取决于其所包含的这些核心论文的数量以及相关的引证率。

3. Elsevier Science Direct Top 25，Elsevier数据库下载次数最多的 25篇论文。

4. IEL Top20，IEL数据库下载最多的20篇论文。

5. ACM 最新会议。根据ACM主页所提供的最新会议信息整理所得，可供研究者参考未来将要召开的会议内容等信息。

6. AIAA最新会议，由AIAA 主站提供的最新会议信息，以供研究者参考所用。

7.IEEE最新会议，由IEEE主站提供的最新会议信息，供相关研究者参考使用。

8. SCI Essential Science Indicators HOT PAPERS，SCI Essential Science Indicators 提供的最近两年的热点文章，其排名根据文章的被引频次。

9. Nature Advance Online Publication，Nature周刊预先提供浏览未出版的最新文章。

如果您对我们的栏目设置、内容编排、出版方式等有好的意见和建议，欢迎与我们联系，我们将积极采纳，使这份电子刊物以臻完善，共同努力创建国内一流、国际知名的高水平研究型大学。

图书馆

2012年4月

目录

1一、最新热点研究论文（来源：http://www.sciencewatch.com/）

3二、最新研究前沿（来源：http://www.sciencewatch.com/）

4三、Elsevier Science Direct Top 25 (工程类)

15四、IEL Top20（来源：http://ieeexplore.ieee.org/）

24五、ACM 最新会议（来源：http://www.acm.org/）

27六、AIAA最新会议（来源：http://www.aiaa.org/）

29七、IEEE最新会议（来源：http://www.ieee.org/index.html）

31八、SCI Essential Science Indicators HOT PAPERS（ENGINEERING）

36九、Nature Advance Online Publication

36(来源：http://www.nature.com/nature/index.html)

一、最新热点研究论文（来源：http://www.sciencewatch.com/）

1.学科领域：Biology & Biochemistry题名： ETHICS AND METHODS FOR BIOLOGICAL RHYTHM RESEARCH ON ANIMALS AND HUMAN BEINGS作者： Portaluppi, F;Smolensky, MH;Touitou, Y出处： CHRONOBIOL INT, 27 (9-10): 1911-1929 2010作者单位：* Univ Hosp S Anna Ferrara, Hypertens Ctr, Dept Med, Corso Giovecca 203, I-44121 Ferrara, Italy.* Univ Hosp S Anna Ferrara, Hypertens Ctr, Dept Med, I-44121 Ferrara, Italy.* Univ Texas Austin, Dept Biomed Engn, Austin, TX 78712 USA.* Fdn A de Rothschild, Unite Chronobiol, Paris, France.

2.学科领域：Chemistry题名： Anion receptor chemistry: highlights from 2008 and 2009作者： Gale, PA出处： CHEM SOC REV, 39 (10): 3746-3771 2010作者单位：* Univ Southampton, Sch Chem, Southampton SO17 1BJ, Hants, England.* Univ Southampton, Sch Chem, Southampton SO17 1BJ, Hants, England.

3.学科领域：Computer Science题名： LocusZoom: regional visualization of genome-wide association scan results作者： Pruim, RJ;Welch, RP;Sanna, S;Teslovich, TM;Chines, PS;Gliedt, TP;Boehnke, M;Abecasis, GR;Willer, CJ出处： BIOINFORMATICS, 26 (18): 2336-2337 SEP 2010作者单位：* Univ Michigan, Dept Biostat, Ann Arbor, MI 48109 USA.* Univ Michigan, Dept Biostat, Ann Arbor, MI 48109 USA.* Univ Michigan, Ctr Stat Genet, Ann Arbor, MI 48109 USA.

4.学科领域：Economics & Business题名： The Economics of Low Stabilization: Model Comparison of Mitigation Strategies and Costs作者： Edenhofer, O;Knopf, B;Barker, T;Baumstark, L;Bellevrat, E;Chateau, B;Criqui, P;Isaac, M;Kitous, A;Kypreos, S;Leimbach, M;Lessmann, K;Magne, B;Scrieciu, S;Turton, H;van Vuuren, DP出处： ENERGY J, 31: 11-48 Sp. Iss. 1 JAN 2010作者单位：* Potsdam Inst Climate Impact Res PIK, POB 601203, D-14412 Potsdam, Germany.* Potsdam Inst Climate Impact Res PIK, D-14412 Potsdam, Germany.* Univ Cambridge, Dept Land Econ, Cambridge Ctr Climate Change Mitigat Res, Cambridge CB2 1TN, England.

5.学科领域：Engineering题名： 205-GHz (Al,In)N/GaN HEMTs作者： Sun, HF;Alt, AR;Benedickter, H;Feltin, E;Carlin, JF;Gonschorek, M;Grandjean, NR;Bolognesi, CR出处： IEEE ELECTRON DEV LETT, 31 (9): 957-959 SEP 2010作者单位：* ETH, Millimeter Wave Elect Grp, CH-8092 Zurich, Switzerland.* ETH, Millimeter Wave Elect Grp, CH-8092 Zurich, Switzerland.* Ecole Polytech Fed Lausanne, Inst Quantum Elect & Photon, CH-1015 Lausanne, Switzerland.

6.学科领域：Environment/Ecology题名： Improvement of dye-sensitized solar cells: what we know and what we need to know作者： Ning, ZJ;Fu, Y;Tian, H出处： ENERGY ENVIRON SCI, 3 (9): 1170-1181 SEP 2010作者单位：* E China Univ Sci & Technol, Key Lab Adv Mat, 130 Meilong Rd, Shanghai 200237, Peoples R China.* E China Univ Sci & Technol, Key Lab Adv Mat, Shanghai 200237, Peoples R China.* E China Univ Sci & Technol, Inst Fine Chem, Shanghai 200237, Peoples R China.* Royal Inst Technol, Sch Biotechnol, Dept Theoret Chem, S-10691 Stockholm, Sweden.

7.学科领域：Materials Science题名： ZnS nanostructures: From synthesis to applications作者： Fang, XS;Zhai, TY;Gautam, UK;Li, LA;Wu, LM;Yoshio, B;Golberg, D出处： PROG MATER SCI, 56 (2): 175-287 FEB 2011作者单位：* Fudan Univ, Dept Mat Sci, Handan Rd 220, Shanghai 200433, Peoples R China.* Fudan Univ, Dept Mat Sci, Shanghai 200433, Peoples R China.* Natl Inst Mat Sci, Int Ctr Mat Nanoarchitecton MANA, Int Ctr Young Scientists, Tsukuba, Ibaraki 3050044, Japan.

8.学科领域：Mathematics题名： Nonlocal Cauchy problem for fractional evolution equations作者： Zhou, Y;Jiao, F出处： NONLINEAR ANAL-REAL WORLD APP, 11 (5): 4465-4475 OCT 2010作者单位：* Xiangtan Univ, Dept Math, Xiangtan 411105, Hunan, Peoples R China.* Xiangtan Univ, Dept Math, Xiangtan 411105, Hunan, Peoples R China.

9.学科领域：Physics题名： Graphene photonics and optoelectronics作者： Bonaccorso, F;Sun, Z;Hasan, T;Ferrari, AC出处： NAT PHOTONICS, 4 (9): 611-622 SEP 2010作者单位：* Univ Cambridge, Dept Engn, Cambridge CB3 0FA, England.* Univ Cambridge, Dept Engn, Cambridge CB3 0FA, England.

10.学科领域：Social Sciences, general题名： The effectiveness of problem-based learning supported with computer simulations on academic performance about buoyancy作者： Koray, O出处： ENERGY EDUC SCI TECHNOL-PT B, 3 (3): 293-304 JUL 2011作者单位：* Karaelmas Univ, Fac Educ, Dept Sci Educ, Zonguldak, Turkey.* Karaelmas Univ, Fac Educ, Dept Sci Educ, Zonguldak, Turkey.

二、最新研究前沿（来源：http://www.sciencewatch.com/）

1.学科领域：Chemistry

研究前沿：REGIOSELECTIVE C-H BOND CLEAVAGE; ALKENE C-H BOND FUNCTIONALIZATION; CARBOXYLATE-ASSISTED TRANSITION-METAL-CATALYZED C-H BOND FUNCTIONALIZATIONS; SYNTHETICALLY VERSATILE ARYL C-H OLEFINATION; METAL-CATALYSED C-H BOND FUNCTIONALISATION

2. 学科领域：Computer Science

研究前沿：FORMATIVE ASSESSMENT-BASED MOBILE LEARNING APPROACH; CONTEXT-AWARE UBIQUITOUS LEARNING; INSTRUCTIONALLY SUPPORTED LEARNING; LEARNING CHINESE; LEARNING ATTITUDES

3. 学科领域：Economics & Business

研究前沿：SPATIAL AUTOREGRESSIVE MODELS; RETHINKING (NEW) ECONOMIC GEOGRAPHY MODELS; PANEL DATA MODELS; GEOGRAPHERS; SIMPLE PANEL UNIT ROOT TEST

4. 学科领域：Engineering

研究前沿：NATIONAL IGNITION FACILITY IGNITION HOHLRAUM ENERGETICS EXPERIMENTS; NATIONAL IGNITION FACILITY LASER PERFORMANCE STATUS; NATIONAL IGNITION CAMPAIGN HOHLRAUM ENERGETICS; NIF IGNITION TARGET REQUIREMENTS; NIF IGNITION TARGETS

5. 学科领域：Materials & Science

研究前沿：UNIFORM MESOPOROUS SILICA NANOPARTICLES; NEAR-INFRARED MESOPOROUS SILICA NANOPARTICLES; MESOPOROUS SILICA NANOPARTICLE SIZE; SIZE-TUNABLE MULTIFUNCTIONAL POROUS SILICA NANOPARTICLES; POLYVALENT NUCLEIC ACID/MESOPOROUS SILICA NANOPARTICLE CONJUGATES

6. 学科领域：Mathematics

研究前沿：FALKNER-SKAN BOUNDARY LAYER FLOW; BOUNDARY LAYER STAGNATION-POINT FLOW; CONVECTIVE SURFACE BOUNDARY CONDITION; MHD VISCOUS FLOW; BOUNDARY-LAYER FLOW

7. 学科领域：Multidisciplinary

研究前沿：HISTONE DEACETYLASE SIRT6 GLUCOSE HOMEOSTASIS HIF1 ALPHA REGULATION; SIRT6 LINKS HISTONE H3 LYSINE 9 DEACETYLATION; MAMMALIAN SIRT6; HYPOXIA-INDUCIBLE FACTOR 2 ALPHA SIGNALING; STRESS-RESPONSIVE DEACETYLASE SIRTUIN 1

8. 学科领域：Physics

研究前沿：OBSERVED TOP QUARK FORWARD-BACKWARD ASYMMETRY AXIGLUON NONEXPLANATION; TOP PAIR FORWARD-BACKWARD ASYMMETRY; TOP QUARK PAIR PRODUCTION; TOP QUARK PRODUCTION; TOP QUARK CROSS SECTION

9. 学科领域：Social Sciences, general

研究前沿：ALCOHOL CONSUMPTION; GLOBAL HEALTH 1 GLOBAL BURDEN; BEVERAGE ALCOHOL PRICE; BRIEF ALCOHOL INTERVENTIONS; ALCOHOL USE

三、Elsevier Science Direct Top 25 (工程类)

1. 题名：Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications • Review article

出处：Biomaterials, Volume 26, Issue 18, June 2005, Pages 3995-4021

作者：Gupta, A.K.; Gupta, M.

摘要：Superparamagnetic iron oxide nanoparticles (SPION) with appropriate surface chemistry have been widely used experimentally for numerous in vivo applications such as magnetic resonance imaging contrast enhancement, tissue repair, immunoassay, detoxification of biological fluids, hyperthermia, drug delivery and in cell separation, etc. All these biomedical and bioengineering applications require that these nanoparticles have high magnetization values and size smaller than 100 nm with overall narrow particle size distribution, so that the particles have uniform physical and chemical properties. In addition, these applications need special surface coating of the magnetic particles, which has to be not only non-toxic and biocompatible but also allow a targetable delivery with particle localization in a specific area. To this end, most work in this field has been done in improving the biocompatibility of the materials, but only a few scientific investigations and developments have been carried out in improving the quality of magnetic particles, their size distribution, their shape and surface in addition to characterizing them to get a protocol for the quality control of these particles. Nature of surface coatings and their subsequent geometric arrangement on the nanoparticles determine not only the overall size of the colloid but also play a significant role in biokinetics and biodistribution of nanoparticles in the body. The types of specific coating, or derivatization, for these nanoparticles depend on the end application and should be chosen by keeping a particular application in mind, whether it be aimed at inflammation response or anti-cancer agents. Magnetic nanoparticles can bind to drugs, proteins, enzymes, antibodies, or nucleotides and can be directed to an organ, tissue, or tumour using an external magnetic field or can be heated in alternating magnetic fields for use in hyperthermia. This review discusses the synthetic chemistry, fluid stabilization and surface modification of superparamagnetic iron oxide nanoparticles, as well as their use for above biomedical applications.

2. 题名：An electro-mechanical impedance model of a cracked composite beam with adhesively bonded piezoelectric patches • Article

出处：Journal of Sound and Vibration, Volume 330, Issue 2, January 2011, Pages 287-307

作者：Yan, W.; Cai, J.B.; Chen, W.Q.

摘要：A model of a laminated composite beam including multiple non-propagating part-through surface cracks as well as installed PZT transducers is presented based on the method of reverberation-ray matrix (MRRM) in this paper. Toward determining the local flexibility characteristics induced by the individual cracks, the concept of the massless rotational spring is applied. A Timoshenko beam theory is then used to simulate the behavior of the composite beam with open cracks. As a result, transverse shear and rotatory inertia effects are included in the model. Only one-dimensional axial vibration of the PZT wafer is considered and the imperfect interfacial bonding between PZT patches and the host beam is further investigated based on a Kelvin-type viscoelastic model. Then, an accurate electro-mechanical impedance (EMI) model can be established for crack detection in laminated beams. In this model, the effects of various parameters such as the ply-angle, fibre volume fraction, crack depth and position on the EMI signatures are highlighted. Furthermore, comparison with existent numerical results is presented to validate the present analysis.

3. 题名：Wireless sensor networks: a survey • Article

出处：Computer Networks, Volume 38, Issue 4, March 2002, Pages 393-422

作者：Akyildiz, I.F.; Su, W.; Sankarasubramaniam, Y.; Cayirci, E.

摘要：This paper describes the concept of sensor networks which has been made viable by the convergence of micro-electro-mechanical systems technology, wireless communications and digital electronics. First, the sensing tasks and the potential sensor networks applications are explored, and a review of factors influencing the design of sensor networks is provided. Then, the communication architecture for sensor networks is outlined, and the algorithms and protocols developed for each layer in the literature are explored. Open research issues for the realization of sensor networks are also discussed.

4. 题名：Effect of process parameters on electroless plating and nickel-ceramic composite membrane characteristics • Article

出处：Desalination, Volume 268, Issue 1-3, March 2011, Pages 195-203

作者：Bulasara, V.K.; Thakuria, H.; Uppaluri, R.; Purkait, M.K.

摘要：In this article we address the process perspective of electroless plating technique to fabricate nickel-ceramic composite membranes. In this work, we also report an inexpensive ceramic membrane precursor formulation which upon sintering process yielded a membrane support with an average pore size of 275 nm. Subsequently, membranes were subjected to electroless plating for wide choice of nickel solution concentration (0.04–0.16 mol/L) and loading ratio (defined as membrane area per unit plating solution volume) values (196–393 cm2/L). Various parameters evaluated to relate upon plating and membrane characteristics are conversion, plating efficiency and inefficiency, metal layer thickness and average nickel-ceramic membrane pore size. In general it was observed that sodium hypophosphite based electroless nickel baths provided lower conversion (10–40%) and moderately higher efficiencies (90–60%). However, the effect of loading ratio on efficiency was found to be insignificant. On the other hand, membrane densification was observed to vary between 78–90% to yield a surface pore size reduction from 275 nm to 128–90 nm. Retail cost based analysis further indicates the non-linear dependencies of both chemicals cost and metal layer thickness with respect to the percent pore densification values.

5. 题名：Production of liquid biofuels from renewable resources • Review article

出处：Progress in Energy and Combustion Science, Volume 37, Issue 1, February 2011, Pages 52-68

作者：Nigam, P.S.; Singh, A.

摘要：This article is an up-to-date review of the literature available on the subject of liquid biofuels. In search of a suitable fuel alternative to fast depleting fossil fuel and oil reserves and in serious consideration of the environmental issues associated with the extensive use of fuels based on petrochemicals, research work is in progress worldwide. Researchers have been re-directing their interests in biomass based fuels, which currently seem to be the only logical alternative for sustainable development in the context of economical and environmental considerations. Renewable bioresources are available globally in the form of residual agricultural biomass and wastes, which can be transformed into liquid biofuels. However, the process of conversion, or chemical transformation, could be very expensive and not worth-while to use for an economical large-scale commercial supply of biofuels. Hence, there is still need for much research to be done for an effective, economical and efficient conversion process. Therefore, this article is written as a broad overview of the subject, and includes information based on the research conducted globally by scientists according to their local socio-cultural and economic situations.

6. 题名：Nickel-ceramic composite membranes: Optimization of hydrazine based electroless plating process parameters • Article

出处：Desalination, Volume 275, Issue 1-3, July 2011, Pages 243-251


摘要：Based on the experimental investigation, this article addresses optimization of nickel hydrazine electroless plating process parameters for the fabrication of mesoporous nickel-ceramic composite membranes. An inexpensive sintered ceramic support with an average pore size of 275 nm was used for all the experiments. Parametric optimization was experimentally investigated for a wide range of nickel solution concentrations (0.04–0.16 mol/L) and loading ratios (196–393 cm2/L). Process parameters such as conversion, plating efficiency and membrane morphological parameters such as average thickness, pore size and effective porosity were evaluated. Based on these evaluated parameters, the optimal process parameters have been evaluated as 0.12 mol/L and 393 cm2/L respectively. In general, it was also observed that hydrazine electroless plating baths are efficient from both processes as well as membrane perspective as they have been observed to provide a maximum selective conversion and PPD of 38% and 98.8% respectively.

7. 题名：Wireless sensor network survey • Article

出处：Computer Networks, Volume 52, Issue 12, August 2008, Pages 2292-2330

作者：Yick, J.; Mukherjee, B.; Ghosal, D.

摘要：A wireless sensor network (WSN) has important applications such as remote environmental monitoring and target tracking. This has been enabled by the availability, particularly in recent years, of sensors that are smaller, cheaper, and intelligent. These sensors are equipped with wireless interfaces with which they can communicate with one another to form a network. The design of a WSN depends significantly on the application, and it must consider factors such as the environment, the application’s design objectives, cost, hardware, and system constraints. The goal of our survey is to present a comprehensive review of the recent literature since the publication of [I.F. Akyildiz, W. Su, Y. Sankarasubramaniam, E. Cayirci, A survey on sensor networks, IEEE Communications Magazine, 2002]. Following a top-down approach, we give an overview of several new applications and then review the literature on various aspects of WSNs. We classify the problems into three different categories: (1) internal platform and underlying operating system, (2) communication protocol stack, and (3) network services, provisioning, and deployment. We review the major development in these three categories and outline new challenges.

8. 题名：Graphene and graphite nanoribbons: Morphology, properties, synthesis, defects and applications • Review article

出处：Nano Today, Volume 5, Issue 4, August 2010, Pages 351-372

作者：Terrones, M.; Botello-Mendez, A.R.; Campos-Delgado, J.; Lopez-Urias, F.; Vega-Cantu, Y.I.; Rodriguez-Macias, F.J.; Elias, A.L.; Munoz-Sandoval, E.; Cano-Marquez, A.G.; Charlier, J.C.; Terrones, H.

摘要：Carbon is a unique and very versatile element which is capable of forming different architectures at the nanoscale. Over the last 20 years, new members of the carbon nanostructure family arose, and more are coming. This review provides a brief overview on carbon nanostructures ranging from C60 to graphene, passing through carbon nanotubes. It provides the reader with important definitions in carbon nanoscience and concentrates on novel one- and two-dimensional layered carbon (sp2 hybridized), including graphene and nanoribbons. This account presents the latest advances in their synthesis and characterization, and discusses new perspectives of tailoring their electronic, chemical, mechanical and magnetic properties based on defect control engineering. It is foreseen that some of the structures discussed in the review will have important applications in areas related to electronics, spintronics, composites, medicine and many others.

9. 题名：Surface plasmon resonance sensors: review • Article

出处：Sensors and Actuators B: Chemical, Volume 54, Issue 1-2, January 1999, Pages 3-15

作者：Homola, J.; Yee, S.S.; Gauglitz, G.

摘要：Since the first application of the surface plasmon resonance (SPR) phenomenon for sensing almost two decades ago, this method has made great strides both in terms of instrumentation development and applications. SPR sensor technology has been commercialized and SPR biosensors have become a central tool for characterizing and quantifying biomolecular interactions. This paper attempts to review the major developments in SPR technology. Main application areas are outlined and examples of applications of SPR sensor technology are presented. Future prospects of SPR sensor technology are discussed.

10. 题名：Combinatorial performance characteristics of agitated nickel hypophosphite electroless plating baths • Article

出处：Journal of Materials Processing Technology, Volume 211, Issue 9, September 2011, Pages 1488-1499


摘要：In this article, we present the combinatorial performance characteristics of agitated sodium hypophosphite electroless plating baths. Various performance characteristics assessed include bath conversion, plating efficiency, selective conversion, metal film thickness, average pore size, effective porosity and percent pore densification (PPD). Bath agitation was brought forward by rotating a symmetric disk shaped porous ceramic substrate with a nominal pore size of 275 nm. The plating characteristics were investigated for wide range of nickel solution concentrations (0.04–0.16 mol/L), stirrer speed (0–200 rpm) and for two different loading ratios (defined as substrate surface area per unit volume of plating solution) values (196 and 393 cm2/L). It was evaluated that stirring had a profound effect on sodium hypophosphite based electroless nickel baths, which are characterized with lower conversions (10–39%) and higher plating efficiencies (62–99%) without stirring phenomena. The stirred plating baths provided about 20–56% excess nickel plating rate when compared to the baths without stirring. This lead to a reduction in average membrane pore size by 20–42 nm and an enhancement in percent pore densification values by about 2–7%. Further, higher concentrations as high as 0.16 mol/L have been found to be detrimental to reduce the metal plating efficiency to lower values (42%). Observed data trends confirm upon the urgent need to identify suitable mass transfer enhancement techniques that target enhancement in selective conversion while providing good values of plating efficiency and PPD.

11. 题名：Revamp study of crude distillation unit heat exchanger network: Energy integration potential of delayed coking unit free hot streams • Article

出处：Applied Thermal Engineering, Volume 29, Issue 11-12, August 2009, Pages 2271-2279

作者：Bulasara, V.K.; Uppaluri, R.; Ghoshal, A.K.

摘要：This work addresses the revamp study of the crude distillation unit (CDU) heat exchanger network (HEN) of a typical refinery with and without the consideration of the free hot streams available in the delayed coking unit (DCU). Based on pinch design method, two sub-cases of revamp study have been considered namely (a) installation of new heat exchangers for the entire network and (b) reutilization of existing heat exchangers. Based on the study, it has been evaluated that the revamp design of existing CDU HEN without considering the DCU free hot streams allows the enhancement of heat integration by 4.73% with respect to that available for the base case. On the other hand, the heat integration potential of DCU free hot streams is evaluated to enhance energy integration by 15.66% (with respect to the base case) with a simultaneous reduction of furnace duty by 37.1% and cooling water duties by 89.8%. Of various cases considered, the most attractive option corresponds to the partial revamp of CDU HEN along with DCU free hot streams that involve the reutilization of existing heat exchangers. The profitability analysis of this option concludes that the revamp design needs an additional investment of 2.68 M$ to enhance annual profit by 1.58 M$ with a payback period of 1.9 years. Thereby, the heat integration potential of DCU free hot streams is inferred to be significant and marks an important choice amongst different key revamp parameters associated to heat exchanger networks.

12. 题名：Heat transfer-A review of 2005 literature • Review article

出处：International Journal of Heat and Mass Transfer, Volume 53, Issue 21-22, October 2010, Pages 4397-4447

作者：Goldstein, R.J.; Ibele, W.E.; Patankar, S.V.; Simon, T.W.; Kuehn, T.H.; Strykowski, P.J.; Tamma, K.K.; Heberlein, J.V.R.; Davidson, J.H.; Bischof, J.; Kulacki, F.A.; Kortshagen, U.; Garrick, S.; Srinivasan, V.; Ghosh, K.; Mittal, R.

摘要：The present review is intended to encompass the heat transfer literature published in 2005. While of a wide-range in scope, some selection is inevitable. We restrict ourselves to papers published in English through a peer-review process, with selected translations from journals published in other languages. Papers from conference proceedings generally are not included, though the Proceeding itself may be cited in the introduction. A significant fraction of the papers reviewed herein relates to the science of heat transfer, including experimental, analytical and numerical studies. Other papers cover applications where heat transfer plays a major role, not only in man-made devices but in natural systems as well. The papers are grouped into major subject areas and then into subfields within these areas. In addition to reviewing the literature, we mention major conferences held in 2005, major awards related to heat transfer presented in 2005, and books on heat transfer published during the year.

13. 题名：Synthesis of multifractional Gaussian noises based on variable-order fractional operators • Article

出处：Signal Processing, Volume 91, Issue 7, July 2011, Pages 1645-1650

作者：Sheng, H.; Sun, H.; Chen, Y.; Qiu, T.

摘要：In this paper, a synthesis method, which is based on variable-order fractional operators, for multifractional Gaussian noises (mGn) is proposed by studying the relationship of white Gaussian noise (wGn), mGn, and multifractional Brownian motion (mBm). Furthermore, a synthesis method for multifractional α‐stable processes, the generalization of mGn, is proposed in order to more accurately characterize the processes with local scaling characteristics and heavy tailed distributions. Synthetic examples of mGn and multifractional α‐stable noises are provided for illustration.

14. 题名：A review on polymer nanofibers by electrospinning and their applications in nanocomposites • Article

出处：Composites Science and Technology, Volume 63, Issue 15, November 2003, Pages 2223-2253

作者：Huang, Z.-M.; Zhang, Y.-Z.; Kotaki, M.; Ramakrishna, S.

摘要：Electrospinning has been recognized as an efficient technique for the fabrication of polymer nanofibers. Various polymers have been successfully electrospun into ultrafine fibers in recent years mostly in solvent solution and some in melt form. Potential applications based on such fibers specifically their use as reinforcement in nanocomposite development have been realized. In this paper, a comprehensive review is presented on the researches and developments related to electrospun polymer nanofibers including processing, structure and property characterization, applications, and modeling and simulations. Information of those polymers together with their processing conditions for electrospinning of ultrafine fibers has been summarized in the paper. Other issues regarding the technology limitations, research challenges, and future trends are also discussed.

15. 题名：Performance characteristics of hydrothermal and sonication assisted electroless plating baths for nickel-ceramic composite membrane fabrication • Article

出处：Desalination, Volume 284, January 2012, Pages 77-85

作者：Bulasara, V.K.; Abhimanyu, M.S.; Pranav, T.; Uppaluri, R.; Purkait, M.K.

摘要：This paper addresses the performance characteristics of nickel–ceramic composite membranes fabricated with hydrothermal mass transfer coupled electroless plating baths. Deposition of nickel on a ceramic membrane support with an average pore size of 275 nm was considered to study the effect of autogenous pressure under hydrothermal conditions and sonication coupled hydrothermal conditions on the process as well as membrane characteristics. Bath conversion, plating efficiency, average film thickness and percent pore densification (PPD) were studied. Parametric investigations were carried out for wide range of initial nickel sulfate concentration (0.04–0.16 mol/L) in the solution at a higher loading ratio (393 cm2/L). An interesting observation from this study was that the autogenous pressure together with ultrasound provided the best performance characteristics of electroless plating. The optimal performance characteristics refer to 81.87% conversion, 84.19% plating efficiency, 99.92% PPD for a nickel composite membrane with film thickness of 37 μm prepared using 0.16 mol/L of nickel solution metal concentration. The microfiltration study on oil-in-water emulsions inferred that the membrane fabricated with HTSO coupling and Ci = 0.04 mol/L gave a rejection of 90.13% and membrane permeability of 0.11 × 10− 10 m3.m− 2.s− 1.Pa− 1.

16. 题名：Robust FIR equalization for time-varying communication channels with intermittent observations via an LMI approach • Article

出处：Signal Processing, Volume 91, Issue 7, July 2011, Pages 1651-1658

作者：Zhang, H.; Shi, Y.; Saadat Mehr, A.; Huang, H.

摘要：The optimal design of finite impulse response (FIR) filters for equalization/deconvolution is investigated in this paper. Two practical yet challenging constraints are incorporated into the modeling of the equalization system: (1) The parameters of the communication channel model are arbitrarily time-varying within a polytope with finite known vertices; (2) at the received end, the received signal is usually intermittent due to network-induced packet dropouts which are modeled by a stochastic Bernoulli distribution. Under the stochastic theory framework, a robust design method for the FIR equalizer is proposed such that the equalization system can achieve the prescribed energy-to-peak performance even it is subject to uncertainties, external noise, and data missing. Sufficient conditions for the existence of the equalizer are derived by a set of linear matrix inequalities (LMIs). An illustrative design example demonstrates the design procedure and the effectiveness of the proposed method.

17. 题名：Review on thermal energy storage with phase change: materials, heat transfer analysis and applications • Review article

出处：Applied Thermal Engineering, Volume 23, Issue 3, February 2003, Pages 251-283

作者：Zalba, B.; Marn, J.M.S.T.; Cabeza, L.F.; Mehling, H.

摘要：Thermal energy storage in general, and phase change materials (PCMs) in particular, have been a main topic in research for the last 20 years, but although the information is quantitatively enormous, it is also spread widely in the literature, and difficult to find. In this work, a review has been carried out of the history of thermal energy storage with solid–liquid phase change. Three aspects have been the focus of this review: materials, heat transfer and applications. The paper contains listed over 150 materials used in research as PCMs, and about 45 commercially available PCMs. The paper lists over 230 references.

18. 题名：A survey on security issues in service delivery models of cloud computing • Review article

出处：Journal of Network and Computer Applications, Volume 34, Issue 1, January 2011, Pages 1-11

作者：Subashini, S.; Kavitha, V.

摘要：Cloud computing is a way to increase the capacity or add capabilities dynamically without investing in new infrastructure, training new personnel, or licensing new software. It extends Information Technology’s (IT) existing capabilities. In the last few years, cloud computing has grown from being a promising business concept to one of the fast growing segments of the IT industry. But as more and more information on individuals and companies are placed in the cloud, concerns are beginning to grow about just how safe an environment it is. Despite of all the hype surrounding the cloud, enterprise customers are still reluctant to deploy their business in the cloud. Security is one of the major issues which reduces the growth of cloud computing and complications with data privacy and data protection continue to plague the market. The advent of an advanced model should not negotiate with the required functionalities and capabilities present in the current model. A new model targeting at improving features of an existing model must not risk or threaten other important features of the current model. The architecture of cloud poses such a threat to the security of the existing technologies when deployed in a cloud environment. Cloud service users need to be vigilant in understanding the risks of data breaches in this new environment. In this paper, a survey of the different security risks that pose a threat to the cloud is presented. This paper is a survey more specific to the different security issues that has emanated due to the nature of the service delivery models of a cloud computing system.

19. 题名：The Internet of Things: A survey • Article

出处：Computer Networks, Volume 54, Issue 15, October 2010, Pages 2787-2805

作者：Atzori, L.; Iera, A.; Morabito, G.

摘要：This paper addresses the Internet of Things. Main enabling factor of this promising paradigm is the integration of several technologies and communications solutions. Identification and tracking technologies, wired and wireless sensor and actuator networks, enhanced communication protocols (shared with the Next Generation Internet), and distributed intelligence for smart objects are just the most relevant. As one can easily imagine, any serious contribution to the advance of the Internet of Things must necessarily be the result of synergetic activities conducted in different fields of knowledge, such as telecommunications, informatics, electronics and social science. In such a complex scenario, this survey is directed to those who want to approach this complex discipline and contribute to its development. Different visions of this Internet of Things paradigm are reported and enabling technologies reviewed. What emerges is that still major issues shall be faced by the research community. The most relevant among them are addressed in details.

20. 题名：Heat transfer-A review of 2004 literature • Review article

出处：International Journal of Heat and Mass Transfer, Volume 53, Issue 21-22, October 2010, Pages 4343-4396

作者：Goldstein, R.J.; Ibele, W.E.; Patankar, S.V.; Simon, T.W.; Kuehn, T.H.; Strykowski, P.J.; Tamma, K.K.; Heberlein, J.V.R.; Davidson, J.H.; Bischof, J.; Kulacki, F.A.; Kortshagen, U.; Garrick, S.; Srinivasan, V.; Ghosh, K.; Mittal, R.

摘要：The present review covers the heat transfer literature published in 2004 in English language, including some translations of foreign language papers. Though extensive, some selection is necessary. Only articles published by a process of peer review in archival journals are reviewed. Papers are grouped into subject-oriented sections and further divided into sub-fields. Many papers deal with the fundamental science of heat transfer, including experimental, numerical and analytical work; others relate to applications or natural systems. In addition to reviewing journal articles, this Review also takes note of important conferences and meetings on heat transfer and related areas, major awards presented in 2004, and relevant books published in 2004.

21. 题名：Numerical modelling of two stoping methods in two Indian mines using degradation of c and mobilization of @f based on Q-parameters • Article

出处：International Journal of Rock Mechanics and Mining Sciences, Volume 48, Issue 7, October 2011, Pages 1095-1112

作者：Barton, N.; Pandey, S.K.

摘要：Two Indian mines are the subject of a comparative study of a strain-softened Hoek–Brown and FLAC 3D modelling, and a novel ‘c then tan φ’ strain-softening-strain-mobilization approach, using Q-system based input data. This approach is also used with FLAC 3D, using identical stope geometries. The parameters CC and FC, denoting the cohesive component and frictional component of shear strength, are extracted directly from the Q-logging and knowledge of UCS, and are the source of the peak values. Measured deformations, or the strains recorded over the total length of pre-mining installed MPBX, are compared and effectively calibrate the models, in view of the very similar deformations obtained from empirical formulations based on Q using the competence factor approach, as in SRF. The ‘c then tan φ’ approach appears to give the most realistic match to observations in the mines, including the modelling of a shear band within the back or roof of a stope, rather than at the surface of the stope. The Q-based approach also uses a depth-dependent modulus, and this is perhaps the reason why the strain-softened Hoek–Brown model, without this stiffening with depth, shows ‘global failure’ in a second mine having a wider range of depths within one model, and many openings, since modulus is not increased in standard-method approaches.

22. 题名：Scaffolds in tissue engineering bone and cartilage • Article

出处：Biomaterials, Volume 21, Issue 24, December 2000, Pages 2529-2543

作者：Hutmacher, D.W.

摘要：Musculoskeletal tissue, bone and cartilage are under extensive investigation in tissue engineering research. A number of biodegradable and bioresorbable materials, as well as scaffold designs, have been experimentally and/or clinically studied. Ideally, a scaffold should have the following characteristics: (i) three-dimensional and highly porous with an interconnected pore network for cell growth and flow transport of nutrients and metabolic waste; (ii) biocompatible and bioresorbable with a controllable degradation and resorption rate to match cell/tissue growth in vitro and/or in vivo; (iii) suitable surface chemistry for cell attachment, proliferation, and differentation and (iv) mechanical properties to match those of the tissues at the site of implantation. This paper reviews research on the tissue engineering of bone and cartilage from the polymeric scaffold point of view.

23. 题名：A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research • Review article

出处：Applied Energy, Volume 88, Issue 4, April 2011, Pages 981-1007

作者：Wang, Y.; Chen, K.S.; Mishler, J.; Cho, S.C.; Adroher, X.C.

摘要：Polymer electrolyte membrane (PEM) fuel cells, which convert the chemical energy stored in hydrogen fuel directly and efficiently to electrical energy with water as the only byproduct, have the potential to reduce our energy use, pollutant emissions, and dependence on fossil fuels. Great deal of efforts has been made in the past, particularly during the last couple of decades or so, to advance the PEM fuel cell technology and fundamental research. Factors such as durability and cost still remain as the major barriers to fuel cell commercialization. In the past two years, more than 35% cost reduction has been achieved in fuel cell fabrication, the current status of $61/kW (2009) for transportation fuel cell is still over 50% higher than the target of the US Department of Energy (DOE), i.e. $30/kW by 2015, in order to compete with the conventional technology of internal-combustion engines. In addition, a lifetime of ∼2500 h (for transportation PEM fuel cells) was achieved in 2009, yet still needs to be doubled to meet the DOE’s target, i.e. 5000 h. Breakthroughs are urgently needed to overcome these barriers. In this regard, fundamental studies play an important and indeed critical role. Issues such as water and heat management, and new material development remain the focus of fuel-cell performance improvement and cost reduction. Previous reviews mostly focus on one aspect, either a specific fuel cell application or a particular area of fuel cell research. The objective of this review is three folds: (1) to present the latest status of PEM fuel cell technology development and applications in the transportation, stationary, and portable/micro power generation sectors through an overview of the state-of-the-art and most recent technical progress; (2) to describe the need for fundamental research in this field and fill the gap of addressing the role of fundamental research in fuel cell technology; and (3) to outline major challenges in fuel cell technology development and the needs for fundamental research for the near future and prior to fuel cell commercialization.

24. 题名：A review of recent research on mechanics of multifunctional composite materials and structures • Review article

出处：Composite Structures, Volume 92, Issue 12, November 2010, Pages 2793-2810

作者：Gibson, R.F.

摘要：In response to the marked increase in research activity and publications in multifunctional materials and structures in the last few years, this article is an attempt to identify the topics that are most relevant to multifunctional composite materials and structures and review representative journal publications that are related to those topics. Articles covering developments in both multiple structural functions and integrated structural and non-structural functions since 2000 are emphasized. Structural functions include mechanical properties like strength, stiffness, fracture toughness, and damping, while non-structural functions include electrical and/or thermal conductivity, sensing and actuation, energy harvesting/storage, self-healing capability, electromagnetic interference (EMI) shielding, recyclability and biodegradability. Many of these recent developments are associated with polymeric composite materials and corresponding advances in nanomaterials and nanostructures, as are many of the articles reviewed. The article concludes with a discussion of recent applications of multifunctional materials and structures, such as morphing aircraft wings, structurally integrated electronic components, biomedical nanoparticles for dispensing drugs and diagnostics, and optically transparent impact absorbing structures. Several suggestions regarding future research needs are also presented.

25. 题名：Electrical conductivity and dielectric properties of PMMA/expanded graphite composites • Article

出处：Composites Science and Technology, Volume 63, Issue 2, February 2003, Pages 225-235

作者：Zheng, W.; Wong, S.-C.

摘要：PMMA/expanded graphite (EG) composites were prepared by direct solution blending of PMMA with the expanded graphite filler. Electrical conductivity and dielectric properties of the composites were measured by a four-point probe resistivity determiner and a dielectric analyzer (DEA). Interestingly, only 1 wt.% filler content was required to reach the percolation threshold (φ) of transition in electrical conductivity from an insulator to a semiconductor using PMMA/EG. The thickness of the interlayer of the expanded graphite was shown to be close to the nanometer scale. The reported filler content was much lower than that required for conventional PMMA/carbon black (8 wt.% carbon) and PMMA/graphite (3.5 wt.% graphite) composites. The improvements in both electrical conductivity and structural integrity were attributed to the difference in filler geometry (aspect ratio and surface area) and the formation of conductive networks in the composites.

四、IEL Top20（来源：http://ieeexplore.ieee.org/）

1. 题目：IEEE Recommended Practice for Software Requirements Specifications

出处：IEEE Std 830-1998

Page(s):i

Digital Object Identifier : 10.1109/IEEESTD.1998.88286

摘要：The content and qualities of a good software requirements specification (SRS) are described, and several sample SRS outlines are presented. This recommended practice is aimed at specifying the requirements of software to be developed, but can also be applied to assist in the selection of in-house and commercial software products. Guidelines for compliance with IEEE/EIA Std 12207.1-1997 are also provided.

2. 题目：Security threats in cloud computing

作者：Shaikh, F.B. Haider, S.

出处：Internet Technology and Secured Transactions (ICITST), 2011 International Conference for

Page(s):214 - 219

摘要：Cloud computing is set of resources and services offered through the Internet. Cloud services are delivered from data centers located throughout the world. Cloud computing facilitates its consumers by providing virtual resources via internet. General example of cloud services is Google apps, provided by Google and Microsoft SharePoint. The rapid growth in field of “cloud computing” also increases severe security concerns. Security has remained a constant issue for Open Systems and internet, when we are talking about security cloud really suffers. Lack of security is the only hurdle in wide adoption of cloud computing. Cloud computing is surrounded by many security issues like securing data, and examining the utilization of cloud by the cloud computing vendors. The wide acceptance www has raised security risks along with the uncountable benefits, so is the case with cloud computing. The boom in cloud computing has brought lots of security challenges for the consumers and service providers. How the end users of cloud computing know that their information is not having any availability and security issues? Every one poses, Is their information secure? This study aims to identify the most vulnerable security threats in cloud computing, which will enable both end users and vendors to know about the key security threats associated with cloud computing. Our work will enable researchers and security professionals to know about users and vendors concerns and critical analysis about the different security models and tools proposed.

3. 题目：Understanding Cloud Computing Vulnerabilities

作者：Grobauer, B. Walloschek, T. Stocker, E.

出处：Security & Privacy, IEEE

Volume: 9 Issue: 2 Date: March-April 2011 Page(s):50 - 57

摘要：The current discourse about cloud computing security issues makes a well-founded assessment of cloud computing's security impact difficult for two primary reasons. First, as is true for many discussions about risk, basic vocabulary such as "risk," "threat," and "vulnerability" are often used as if they were interchangeable, without regard to their respective definitions. Second, not every issue that's raised is really specific to cloud computing. We can achieve an accurate understanding of the security issue "delta" that cloud computing really adds by analyzing how cloud computing influences each risk factor. One important factor concerns vulnerabilities: cloud computing makes certain well-understood vulnerabilities more significant and adds new vulnerabilities. Here, the authors define four indicators of cloud-specific vulnerabilities, introduce a security-specific cloud reference architecture, and provide examples of cloud-specific vulnerabilities for each architectural component.

4. 题目：Compressed sensing

作者：Donoho, D.L.

出处：Information Theory, IEEE Transactions on

Volume: 52 Issue: 4 Date: April 2006 Page(s):1289 - 1306

Digital Object Identifier : 10.1109/TIT.2006.871582

摘要：Suppose x is an unknown vector in Ropfm (a digital image or signal); we plan to measure n general linear functionals of x and then reconstruct. If x is known to be compressible by transform coding with a known transform, and we reconstruct via the nonlinear procedure defined here, the number of measurements n can be dramatically smaller than the size m. Thus, certain natural classes of images with m pixels need only n=O(m1/4log5/2(m)) nonadaptive nonpixel samples for faithful recovery, as opposed to the usual m pixel samples. More specifically, suppose x has a sparse representation in some orthonormal basis (e.g., wavelet, Fourier) or tight frame (e.g., curvelet, Gabor)-so the coefficients belong to an lscrp ball for 0

5. 题目：Multiple-antenna techniques in LTE-advanced

作者：Boccardi, F. Clerckx, B. Ghosh, A. Hardouin, E. Jöngren, G. Kusume, K. Onggosanusi, E. Yang Tang

出处：Communications Magazine, IEEE

Volume: 50 Issue: 3 Date: March 2012 Page(s):114 - 121

摘要：In this article we discuss the different multiple antenna techniques introduced in LTE-Advanced. Rather than describing the technical details of the adopted solutions, we approach the problem starting from the design targets and the antenna deployments prioritized by the operators. Then we present the main enabling solutions introduced for downlink and uplink transmissions, and subsequently assess the performance of these solutions in different scenarios. Finally, we discuss some possible future developments.

6. 题目：Particle swarm optimization

作者：Kennedy, J. Eberhart, R.

出处：Neural Networks, 1995. Proceedings., IEEE International Conference on

Volume: 4 Page(s):1942 - 1948 vol.4

Digital Object Identifier : 10.1109/ICNN.1995.488968

摘要：A concept for the optimization of nonlinear functions using particle swarm methodology is introduced. The evolution of several paradigms is outlined, and an implementation of one of the paradigms is discussed. Benchmark testing of the paradigm is described, and applications, including nonlinear function optimization and neural network training, are proposed. The relationships between particle swarm optimization and both artificial life and genetic algorithms are described

7. 题目：LTE-advanced: next-generation wireless broadband technology [Invited Paper]

作者：Ghosh, A. Ratasuk, R. Mondal, B. Mangalvedhe, N. Thomas, T.

出处：Wireless Communications, IEEE

Volume: 17 Issue: 3 Date: June 2010 Page(s):10 - 22

Digital Object Identifier : 10.1109/MWC.2010.5490974

摘要：LTE Release 8 is one of the primary broadband technologies based on OFDM, which is currently being commercialized. LTE Release 8, which is mainly deployed in a macro/microcell layout, provides improved system capacity and coverage, high peak data rates, low latency, reduced operating costs, multi-antenna support, flexible bandwidth operation and seamless integration with existing systems. LTE-Advanced (also known as LTE Release 10) significantly enhances the existing LTE Release 8 and supports much higher peak rates, higher throughput and coverage, and lower latencies, resulting in a better user experience. Additionally, LTE Release 10 will support heterogeneous deployments where low-power nodes comprising picocells, femtocells, relays, remote radio heads, and so on are placed in a macrocell layout. The LTE-Advanced features enable one to meet or exceed IMT-Advanced requirements. It may also be noted that LTE Release 9 provides some minor enhancement to LTE Release 8 with respect to the air interface, and includes features like dual-layer beamforming and time-difference- of-arrival-based location techniques. In this article an overview of the techniques being considered for LTE Release 10 (aka LTEAdvanced) is discussed. This includes bandwidth extension via carrier aggregation to support deployment bandwidths up to 100 MHz, downlink spatial multiplexing including single-cell multi-user multiple-input multiple-output transmission and coordinated multi point transmission, uplink spatial multiplexing including extension to four-layer MIMO, and heterogeneous networks with emphasis on Type 1 and Type 2 relays. Finally, the performance of LTEAdvanced using IMT-A scenarios is presented and compared against IMT-A targets for full buffer and bursty traffic model.

8. 题目：Smart Grid Technologies: Communication Technologies and Standards

作者：Gungor, V.C. Sahin, D. Kocak, T. Ergut, S. Buccella, C. Cecati, C. Hancke, G.P.

出处：Industrial Informatics, IEEE Transactions on

Volume: 7 Issue: 4 Date: Nov. 2011 Page(s):529 - 539

Digital Object Identifier : 10.1109/TII.2011.2166794

摘要：For 100 years, there has been no change in the basic structure of the electrical power grid. Experiences have shown that the hierarchical, centrally controlled grid of the 20th Century is ill-suited to the needs of the 21st Century. To address the challenges of the existing power grid, the new concept of smart grid has emerged. The smart grid can be considered as a modern electric power grid infrastructure for enhanced efficiency and reliability through automated control, high-power converters, modern communications infrastructure, sensing and metering technologies, and modern energy management techniques based on the optimization of demand, energy and network availability, and so on. While current power systems are based on a solid information and communication infrastructure, the new smart grid needs a different and much more complex one, as its dimension is much larger. This paper addresses critical issues on smart grid technologies primarily in terms of information and communication technology (ICT) issues and opportunities. The main objective of this paper is to provide a contemporary look at the current state of the art in smart grid communications as well as to discuss the still-open research issues in this field. It is expected that this paper will provide a better understanding of the technologies, potential advantages and research challenges of the smart grid and provoke interest among the research community to further explore this promising research area.

9. 题目：Data Security in the World of Cloud Computing

作者：Kaufman, L.M.

出处：Security & Privacy, IEEE

Volume: 7 Issue: 4 Date: July-Aug. 2009 Page(s):61 - 64

Digital Object Identifier : 10.1109/MSP.2009.87

摘要：Today, we have the ability to utilize scalable, distributed computing environments within the confines of the Internet, a practice known as cloud computing. In this new world of computing, users are universally required to accept the underlying premise of trust. Within the cloud computing world, the virtual environment lets users access computing power that exceeds that contained within their own physical worlds. Typically, users will know neither the exact location of their data nor the other sources of the data collectively stored with theirs. The data you can find in a cloud ranges from public source, which has minimal security concerns, to private data containing highly sensitive information (such as social security numbers, medical records, or shipping manifests for hazardous material). Does using a cloud environment alleviate the business entities of their responsibility to ensure that proper security measures are in place for both their data and applications, or do they share joint responsibility with service providers? The answers to this and other questions lie within the realm of yet-to-be-written law. As with most technological advances, regulators are typically in a "catch-up" mode to identify policy, governance, and law. Cloud computing presents an extension of problems heretofore experienced with the Internet. To ensure that such decisions are informed and appropriate for the cloud computing environment, the industry itself should establish coherent and effective policy and governance to identify and implement proper security methods.

10. 题目：Cognitive radio: brain-empowered wireless communications

作者：Haykin, S.

出处：Selected Areas in Communications, IEEE Journal on

Volume: 23 Issue: 2 Date: Feb. 2005 Page(s): 201 - 220

Digital Object Identifier : 10.1109/JSAC.2004.839380

摘要：Cognitive radio is viewed as a novel approach for improving the utilization of a precious natural resource: the radio electromagnetic spectrum. The cognitive radio, built on a software-defined radio, is defined as an intelligent wireless communication system that is aware of its environment and uses the methodology of understanding-by-building to learn from the environment and adapt to statistical variations in the input stimuli, with two primary objectives in mind: · highly reliable communication whenever and wherever needed; · efficient utilization of the radio spectrum. Following the discussion of interference temperature as a new metric for the quantification and management of interference, the paper addresses three fundamental cognitive tasks. 1) Radio-scene analysis. 2) Channel-state estimation and predictive modeling. 3) Transmit-power control and dynamic spectrum management. This work also discusses the emergent behavior of cognitive radio.

11. 题目：A fast and elitist multiobjective genetic algorithm: NSGA-II

作者：Deb, K. Pratap, A. Agarwal, S. Meyarivan, T.

出处：Evolutionary Computation, IEEE Transactions on

Volume: 6 Issue: 2 Date: Apr 2002 Page(s):182 - 197

Digital Object Identifier : 10.1109/4235.996017

摘要：Multi-objective evolutionary algorithms (MOEAs) that use non-dominated sorting and sharing have been criticized mainly for: (1) their O(MN3) computational complexity (where M is the number of objectives and N is the population size); (2) their non-elitism approach; and (3) the need to specify a sharing parameter. In this paper, we suggest a non-dominated sorting-based MOEA, called NSGA-II (Non-dominated Sorting Genetic Algorithm II), which alleviates all of the above three difficulties. Specifically, a fast non-dominated sorting approach with O(MN2) computational complexity is presented. Also, a selection operator is presented that creates a mating pool by combining the parent and offspring populations and selecting the best N solutions (with respect to fitness and spread). Simulation results on difficult test problems show that NSGA-II is able, for most problems, to find a much better spread of solutions and better convergence near the true Pareto-optimal front compared to the Pareto-archived evolution strategy and the strength-Pareto evolutionary algorithm - two other elitist MOEAs that pay special attention to creating a diverse Pareto-optimal front. Moreover, we modify the definition of dominance in order to solve constrained multi-objective problems efficiently. Simulation results of the constrained NSGA-II on a number of test problems, including a five-objective, seven-constraint nonlinear problem, are compared with another constrained multi-objective optimizer, and the much better performance of NSGA-II is observed

12. 题目：A simple transmit diversity technique for wireless communications

作者：Alamouti, S.M.

出处：Selected Areas in Communications, IEEE Journal on

Volume: 16 Issue: 8 Date: Oct 1998 Page(s):1451 - 1458


摘要：This paper presents a simple two-branch transmit diversity scheme. Using two transmit antennas and one receive antenna the scheme provides the same diversity order as maximal-ratio receiver combining (MRRC) with one transmit antenna, and two receive antennas. It is also shown that the scheme may easily be generalized to two transmit antennas and M receive antennas to provide a diversity order of 2M. The new scheme does not require any bandwidth expansion or any feedback from the receiver to the transmitter and its computation complexity is similar to MRRC

13. 题目：A Computational Approach to Edge Detection

作者：Canny, John

出处：Pattern Analysis and Machine Intelligence, IEEE Transactions on

Volume: PAMI-8 Issue: 6 Date: Nov. 1986 Page(s):679 - 698

Digital Object Identifier : 10.1109/TPAMI.1986.4767851

摘要：This paper describes a computational approach to edge detection. The success of the approach depends on the definition of a comprehensive set of goals for the computation of edge points. These goals must be precise enough to delimit the desired behavior of the detector while making minimal assumptions about the form of the solution. We define detection and localization criteria for a class of edges, and present mathematical forms for these criteria as functionals on the operator impulse response. A third criterion is then added to ensure that the detector has only one response to a single edge. We use the criteria in numerical optimization to derive detectors for several common image features, including step edges. On specializing the analysis to step edges, we find that there is a natural uncertainty principle between detection and localization performance, which are the two main goals. With this principle we derive a single operator shape which is optimal at any scale. The optimal detector has a simple approximate implementation in which edges are marked at maxima in gradient magnitude of a Gaussian-smoothed image. We extend this simple detector using operators of several widths to cope with different signal-to-noise ratios in the image. We present a general method, called feature synthesis, for the fine-to-coarse integration of information from operators at different scales. Finally we show that step edge detector performance improves considerably as the operator point spread function is extended along the edge.

14. 题目：Low Profile, Miniaturized, Inductively Coupled Capacitively Loaded Monopole Antenna

作者：Jungsuek Oh Sarabandi, K.

出处：Antennas and Propagation, IEEE Transactions on

Volume: 60 Issue: 3 Date: March 2012 Page(s):1206 - 1213

Digital Object Identifier : 10.1109/TAP.2011.2180313

摘要：A novel high-gain low-profile miniaturized antenna with omnidirectional vertically polarized radiation, similar to a short dipole is presented. The proposed design focus is on increasing the gain and improving the polarization purity of the radiated field in the horizontal plane. The gain and polarization improvement are achieved by isolating the feed structure from a miniaturized resonant radiating structure composed of an in-plane capacitor and a structurally embedded transformer. The antenna topology is developed, based on circuit model and through full-wave simulations the equivalence is established. The equivalent circuit model assists in the initial design, and then minor modifications are required to achieve the desired frequency of operation. The initial topology of the proposed antenna, the so-called Inductively Coupled Capacitively Loaded Monopole Antenna (ICCLMA), consists of two metal layers, a feeding pin and a shorting pin. The performance of the proposed antenna is compared to that of an ordinary inverted F antenna and a more recent low profile vertically polarized antenna (LMMMA) . It is shown that the gain of ICCLMA is 9 dB and 4 dB higher than that of the conventional inverted-F antenna and the LMMMA, respectively. To simplify the fabrication process a modified single-layer ICCLMA topology is presented and optimized. Finally, a design procedure to further reduce the lateral dimension of ICCLMA is presented. A procedure for accurate measurement of antennas with small ground planes is also presented.

15. 题目：Cloud computing security threats and responses

作者：Sabahi, F.

出处：Communication Software and Networks (ICCSN), 2011 IEEE 3rd International Conference on

Page(s):245 - 249

Digital Object Identifier : 10.1109/ICCSN.2011.6014715

摘要：Cloud computing is one of today's most exciting technologies due to its ability to reduce costs associated with computing while increasing flexibility and scalability for computer processes. During the past few years, cloud computing has grown from being a promising business idea to one of the fastest growing parts of the IT industry. IT organizations have expresses concern about critical issues (such as security) that exist with the widespread implementation of cloud computing. These types of concerns originate from the fact that data is stored remotely from the customer's location; in fact, it can be stored at any location. Security, in particular, is one of the most argued-about issues in the cloud computing field; several enterprises look at cloud computing warily due to projected security risks. The risks of compromised security and privacy may be lower overall, however, with cloud computing than they would be if the data were to be stored on individual machines instead of in a so - called "cloud" (the network of computers used for remote storage and maintenance). Comparison of the benefits and risks of cloud computing with those of the status quo are necessary for a full evaluation of the viability of cloud computing. Consequently, some issues arise that clients need to consider as they contemplate moving to cloud computing for their businesses. In this paper I summarize reliability, availability, and security issues for cloud computing (RAS issues), and propose feasible and available solutions for some of them.

16. 题目：Downlink MIMO in LTE-advanced: SU-MIMO vs. MU-MIMO

作者：Lingjia Liu Runhua Chen Geirhofer, S. Sayana, K. Zhihua Shi Yongxing Zhou


Volume: 50 Issue: 2 Date: February 2012 Page(s):140 - 147

Digital Object Identifier : 10.1109/MCOM.2012.6146493

摘要：Single-user multi-antenna technologies are well upported in current standard specifications like LTE Release 8/9. Further development of the specification (LTE-Advanced) is expected to conform to the requirements for IMT-Advanced systems. One of the key enabling features of LTE-Advanced to meet IMT-Advanced downlink performance requirements is multi-user MIMO, where a transmitter serves multiple users simultaneously on the same frequency resource, primarily relying on spatial separation. In general, multi-user MIMO is beneficial for improving average user spectral efficiency. However, cell edge user spectral efficiency may be reduced if multi-user MIMO is used exclusively, due to residual inter-user interference arising from practical multi-user beamforming and reduced transmit power allocated to each user. Therefore, it should be possible to configure the UE-specific transmission mode to support dynamic switching between single-user MIMO and multi-user MIMO to balance the cell edge user spectral efficiency as well as the average cell user spectral efficiency. In this article, we study various aspects of multi-user MIMO including design philosophy, multi-user precoding, and control signaling. The associated feedback schemes, including those that facilitate dynamic switching, are discussed. Performance evaluation is conducted to demonstrate the gain of dynamically switched single-user and multiuser MIMO as opposed to traditional single-user MIMO.

17. 题目：A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking

作者：Arulampalam, M.S. Maskell, S. Gordon, N. Clapp, T.

出处：Signal Processing, IEEE Transactions on

Volume: 50 Issue: 2 Date: Feb 2002 Page(s):174 - 188


摘要：Increasingly, for many application areas, it is becoming important to include elements of nonlinearity and non-Gaussianity in order to model accurately the underlying dynamics of a physical system. Moreover, it is typically crucial to process data on-line as it arrives, both from the point of view of storage costs as well as for rapid adaptation to changing signal characteristics. In this paper, we review both optimal and suboptimal Bayesian algorithms for nonlinear/non-Gaussian tracking problems, with a focus on particle filters. Particle filters are sequential Monte Carlo methods based on point mass (or "particle") representations of probability densities, which can be applied to any state-space model and which generalize the traditional Kalman filtering methods. Several variants of the particle filter such as SIR, ASIR, and RPF are introduced within a generic framework of the sequential importance sampling (SIS) algorithm. These are discussed and compared with the standard EKF through an illustrative example

18. 题目：From LTE-advanced to the future

作者：Baker, M.




摘要：LTE and LTE-Advanced have undeniably provided a major step forward in mobile communication capability, enabling mobile service provisioning to approach for the first time that available from fixed-line connections. However, market demands typically do not evolve simply in discrete steps; therefore, the future evolution of LTE-Advanced will be a story of continuous enhancement, on one hand taking advantage of the advancing capabilities of technology, while on the other aiming to keep pace with the expectations and needs of the end users. In this article, the likely directions of this continuing enhancement are discussed, and some areas where further technical advancement will be required are identified. In particular, potential measures to enhance the efficiency of spectrum utilization by joint multicell optimization, dynamic adaptation of the network to traffic characteristics and load levels, and support for new applications are highlighted.

19. 题目：Statistical pattern recognition: a review

作者：Jain, A.K. Duin, R.P.W. Jianchang Mao

出处：Pattern Analysis and Machine Intelligence, IEEE Transactions on

Volume: 22 Issue: 1 Date: Jan 2000 Page(s):4 - 37


摘要：The primary goal of pattern recognition is supervised or unsupervised classification. Among the various frameworks in which pattern recognition has been traditionally formulated, the statistical approach has been most intensively studied and used in practice. More recently, neural network techniques and methods imported from statistical learning theory have been receiving increasing attention. The design of a recognition system requires careful attention to the following issues: definition of pattern classes, sensing environment, pattern representation, feature extraction and selection, cluster analysis, classifier design and learning, selection of training and test samples, and performance evaluation. In spite of almost 50 years of research and development in this field, the general problem of recognizing complex patterns with arbitrary orientation, location, and scale remains unsolved. New and emerging applications, such as data mining, web searching, retrieval of multimedia data, face recognition, and cursive handwriting recognition, require robust and efficient pattern recognition techniques. The objective of this review paper is to summarize and compare some of the well-known methods used in various stages of a pattern recognition system and identify research topics and applications which are at the forefront of this exciting and challenging field

20. 题目：LTE-advanced: an operator perspective

作者：Bhat, P. Nagata, S. Campoy, L. Berberana, I. Derham, T. Guangyi Liu Xiaodong Shen Pingping Zong Jin Yang




摘要：LTE-Advanced extends the capabilities originally developed in LTE within the 3GPP. Carrier aggregationis the most significant, albeit complex, improvement provided by LTE-Advanced. Bandwidths from various portions of the spectrum are logically concatenated resulting in a virtual block of a much larger band, enabling increased data throughput. Additionally, enhancements to MIMO antenna techniques in the uplink and downlink further increase the data throughput. Cell coverage is improved by means of relay nodes, which connect to donor eNode-Bs. To cope with the many varieties of cell types and sizes (macro, pico, femto), intercell interference control is enhanced to handle these heterogeneous networks. Operators hope to leverage LTE-Advanced to offer their mobile wireless customers a vastly superior user experience.

五、ACM 最新会议（来源：http://www.acm.org/）

1.会议名称：CCGrid '12会议时间： May 13 - May 16 2012

会议地点：Ottawa ON Canada

会议简介：The CCGrid symposium series serves as a major international forum for presenting and sharing recent research accomplishments and technological developments in the field of Cluster, Cloud and Grid computing. The symposium is popular among researchers and practitioners from both industry and academia. The first CCGrid Symposium started in Brisbane, Australia, in 2001. Since then, the conference has successfully been hosted around the world. The conferences from 2002 to 2011 were held in Germany, Japan, USA, UK, Singapore, Brazil, France, China, Australia, and USA, respectively. This year, the 12th International Symposium is going to be held in Ottawa, Canada. The symposium is sponsored by IEEE and ACM (approval pending).

Conference Scope

Topics of interest include, but are not limited to:

•Paradigms and Technologies: System architectures, Design and deployment; Programming models, language, systems and tools/environments; Virtualization; Middleware technologies; Volunteer Computing.

•Service-Orientation: Service oriented architectures; Utility computing models; *aaS paradigm; Service composition and orchestration

•Greening: Environment friendly computing ecosystems; Hardware/software/application energy efficiency; Power and cooling; Thermal/power awareness

•Autonomic Management: Self-* behaviors, models and technologies; Autonomic paradigms and approaches (control-based, bio-inspired, emergent, etc.); Bio-inspired approaches to management; SLA definition and enforcement;

•Economic Aspects: Utility models and computing economies; Economic-based models and approaches.

•Monitoring and Evaluation: Performance models; Monitoring and evaluation tools, Analysis of system/application performance; Benchmarks and testbeds.

•Security and Trust: Cloud/Grid security and trust; Access control; Data privacy and integrity; Regulation.

•Applications and Experiences: Applications to real and complex problems in science, engineering, business and society; User studies; Experiences with large-scale deployments systems or applications.

论文提交网址：http://www.cloudbus.org/ccgrid2012/registration.html

2. 会议名称：ACM International Conference on Computing Frontiers (CF'12)

会议时间：May 15 - May 17 2012

会议地点：Caligari Italy

会议简介：The increasing complexity, performance, cost and energy efficiency needs of current and future applications require novel and innovative approaches for the design of computing systems. Boundaries between state of the art and revolutionary innovation constitute the computing frontiers that must be pushed forward to provide the support required for the advancement of science, engineering and information technology. The Computing Frontiers conference focuses on a wide spectrum of advanced technologies and radically new solutions relevant to the development of the whole spectrum of computer systems, from embedded to high-performance computing.

Authors are invited to submit full papers to the main conference and Ph.D. students are invited to submit an extended abstract for a special Ph.D. forum and poster session. The accepted Ph.D. forum extended abstracts will be included in the conference's proceedings. We seek contributions on novel computing paradigms, computational models, application paradigms, computer architecture, development environments, compilers, or operating environments. Papers are solicited in, but not limited to, the following areas:

•Applications, programming and performance analysis of advanced architectures

•Next-generation high performance computing and systems

•Accelerators: many-core, GPU, custom, reconfigurable, embedded, and hybrid

•Defect- and variability-tolerant designs, dependable computing

•Power and energy efficiency: architectures, compilers and algorithms

•Virtualization and virtual machines

•Cloud-, internet-scale, service-oriented and smart infrastructure computing

•Compilers and operating systems: adaptive, run-time, and auto-tuning

•System management and security

•Quantum and nano-scale computing

•Impact of novel technology (e.g. NV memory, silicon photonics) on computing

•Computational neuroscience, neuromorphic and biologically-inspired architectures

•Computational aspects of intelligent systems and robotics

•Reconfigurable, autonomic, organic, and self-organizing computation and systems

•Interfaces and visualization for emerging applications and systems

•Novel frontiers in computational science and scientific data repositories

•Storing, managing, analyzing, and searching large data sets (" big data ")

•Sensors and sensor networks

Two Special Sessions

This year Computing Frontiers will have two special sessions of invited talks on projects from the European Commission's Seventh Framework Programme and artificial intelligence for games

Full papers must be submitted through the conference web site and should not exceed 10 double-column pages and extended abstracts cannot exceed 4 double-column pages in standard ACM conference format, including figures, tables, and references. Papers will be reviewed in a double blind fashion. This means that submissions must be anonymous. When submitting for a double blind process, authors need to take special care in removing their names and any hints that might reveal their identities to the reviewers. Instructions for the camera ready papers can be found here Pacific Northwest National Laboratory and Delft University of Technology will present best paper awards dedicated to the memory of Jarek Nieplocha and Stamatis Vassiliadis. As per ACM guidelines, at least one of the authors of accepted papers is required to register for the conference. Additional submission guidelines will be available on the conference web site.

Selected papers will be invited to be extended for a special issue of the Springer International Journal of Parallel Programming (IJPP).

A Note About Poster Preparation: When preparing your poster, please be advised that you need to create a A0-size poster.

论文提交网址：http://pcsostres.ac.upc.edu/cf12/

3. 会议名称：CHI '12会议时间：May 05 - May 10 2012

会议地点：Austin TX USA

会议简介：The ACM SIGCHI Conference on Human Factors in Computing Systems is the premier international conference on human-computer interaction. CHI 2012 focuses on the centrality of experience—from the models, theories and practical insights we need to understand and design for user experience to experiencing innovation through hands-on interactivity.

The experience of CHI 2012 is centered in vibrant Austin, Texas, the Live Music Capital of the World®. Home to the University of Texas and the annual SXSW music, film, and interactive festival and conference, Austin offers CHI attendees state-of-the-art conference facilities together with outstanding food and vibrant nightlife. We look forward to joining you in Austin for the CHI 2012 Experience!

General Conference Chair: Joseph A. Konstan, University of Minnesota

Technical Program Chairs:Ed H. Chi, Google Kristina Höök, Stockholm University and SICS

论文提交网址：http://chi2012.acm.org/cfp-papers-notes.shtml

4. 会议名称：GLSVLSI'12会议时间：May 03 - May 04 2012

会议地点：Salt Lake Cit UT USA

会议简介：The 22nd edition of GLSVLSI will be held in Salt Lake City, Utah, USA, on May 3-4, 2012. Original, unpublished papers, describing research in the general area of VLSI are solicited. Both theoretical and experimental research results are welcome. Proceedings will be published electronically and will be accessed by ACM Digital library.

论文提交网址：http://www.regonline.com/Register/Checkin.aspx?EventID=1077769

5.会议名称：NOCS'12会议时间：May 07 - May 11 2012 2800

会议地点： Kgs. Lyngby (Copenhagen) Denmark

6. 会议名称：ASSETS 2012

会议时间：22-24 October 2012

会议地点：Boulder, Colorado,USA

会议简介：The ASSETS conference explores the design, evaluation, and use of computing and information technologies to benefit people with disabilities and older adults. ASSETS is the premier forum for presenting innovative research on mainstream and specialized assistive technologies, accessible computing, and assistive applications of computer, network, and information technologies. This includes the use of technology by and in support of:

Individuals with hearing, sight and other sensory impairments

Individuals with motor impairments

Individuals with memory, learning and cognitive impairments

Individuals with multiple impairments

Older adults with diverse capabilities

Professionals who work with these populations

All contributions are peer-reviewed by an international Program Committee. Accepted papers, posters and demonstrations will be archived in the ACM digital library. Select authors will be invited to submit extended versions to a special issue of the ACM Transactions on Accessible Computing (TACCESS).

论文提交网址：https://www.softconf.com/c/assets2012

六、AIAA最新会议（来源：http://www.aiaa.org/）

1. 会议名称： 53rd Structures, Structural Dynamics, and Materials and Co-located Conferences

会议时间：04/23/2012 - 04/26/2012

会议地点：Honolulu, Hawaii

会议简介：Sponsored by AIAA, ASME, ASCE, AHS, and ASC, this established annual conference is a widely acknowledged event that provides a unique forum dedicated to the latest developments in the collective disciplines of structures, structural dynamics, materials, design engineering, and survivability. This year’s presentations will address strategies and techniques for shortening the time required to bring new aircraft and spacecraft structures and materials technologies to flight readiness.

论文提交网址：https://www.aiaa.org/IframeOneColumn.aspx?id=3412&evt_key=040e8fdf-deae-

4d99-96fa-2a6cdf207374

2. 会议名称：2012 Aerospace Spotlight Awards Gala

会议时间：05/09/2012 - 05/09/2012

会议地点：Washington, DC

会议简介：The American Institute of Aeronautics and Astronautics cordially invites you to participate in a night dedicated to honoring achievements in aerospace. Join us, along with the most influential and inspiring individuals in the industry, as they are recognized during this momentous celebration. Reserve a place for your organization and support this year’s featured guests of honor, including the newly elected AIAA Fellows and Honorary Fellows, as well as recipients of some of the industry’s most prestigious awards.This black-tie occasion provides you with the unique opportunity to invite officials and constituents from the DoD, NASA, the FAA, and other government agencies to attend this distinguished event. As honored guests, these representatives will be afforded with exceptional opportunities for networking and information sharing.

Please note that the Awards Gala is organized according to government directives. Government guest selection, invitation, and seating will be administered solely by AIAA in accordance with government policy.

3. 会议名称：Global Space Exploration Conference

会议时间：05/22/2012 - 05/24/2012

会议地点：Washington, DC

会议简介：The Global Space Exploration Conference (GLEX), organized by the International Astronautical Federation (IAF) and the American Institute of Aeronautics and Astronautics (AIAA), brings together the global space exploration stakeholder, including senior administrators and exploration managers, from the major space agencies, industry, governments, academia and NGO's to present results, exchange ideas, debate roadmaps, and discuss the future opportunities provided by human and robotic space exploration.

The comprehensive program will include high-level plenary events, keynote lectures and technical sessions that will address plans for space exploration, and explore how industry, politics, and law will help shape the future environment for this exciting domain of astronautics.

4. 会议名称：18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference)

会议时间：06/04/2012 - 06/06/2012

会议地点：Colorado Springs, Colorado

会议简介：The AIAA/CEAS Aeroacoustics Conference is the premier international forum for the field of aeroacoustics, offering scientists and engineers from industry, government, and academia an exceptional opportunity to exchange knowledge and results of current studies and to discuss directions for future research. Papers address all aspects of the generation, propagation, and control of vehicle noise, as well as the effect of noise on structures and individuals. The technical program includes theoretical, numerical, and experimental contributions that describe original research results and/or innovative design concepts.

5. 会议名称： Aerospace Today and Tomorrow - An Executive Symposium

会议时间：06/07/2012 - 06/07/2012

会议地点：Williamsburg, Virginia

会议简介：Since 1989, Aerospace Today ... and Tomorrow has provided a forum for executive discussion on the aerospace industry, from government and corporate perspectives. Participants will

专题信息咨询 - nwpu.edu.cntushuguan.nwpu.edu.cn/tuqing2012-1.doc · Web...

Documents

Transcript of 专题信息咨询 - nwpu.edu.cntushuguan.nwpu.edu.cn/tuqing2012-1.doc · Web...