EDILIZIA listino lordo-netto + catalogo - EN · UNISYSTEM tinting system Ral 7035 grey PACK....

Barozzi vernici S.r.l.

pag. 4

pag. 5

pag. 6-7

pag. 8

pag. 9

pag. 10

pag. 11

pag. 12

pag. 13

pag. 14

pag. 15

pag. 16-17

RUSTPROOF Products - Solvent-Based PRIMERS

L' altrosmalto, Idroprimer, Radiator, Oxifer, Idroflatting U.V., Idrowood

UNREGENERATED

Nuovo Galvant, Antifos, Sivifer, Siviopac, Coprimacchia antifumo

FIRE RESISTANT AND INTUMESCENT PAINTS

PENETRATING SEALERS, solvent-based PAINTS SUITABLE FOR WOOD

ECOLOGICAL Range - odourless, water-dilutable produ cts

Sintesol, Nitrosol, Aquarex INODOROTHINNERS formulated with pure raw materials

Resiol "gloss and matt", Minicolor, Hiltomar, Ottocento, Agricolor "gloss and matt"

BUILDING RANGE

Legnolack, Micotex Legno, Regent, Vampiro

Solvent-Based ENAMELS

FIXATIVES AND SEALERSFis-sol, Harz-acril, Muracril, Nanofix, Primer-sil

Barozzi paint, Divina, Decorpaint

Ecopaint breathable Ecopaint water-repellent Ecopaint washable

BREATHABLE WATER-REPELLENT PAINTS

PAINT FOR INTERIOR WALLS

Sivicolor, Bicolor

ECO-FRIENDLY PRODUCTS, V.O.C. free

WASHABLE WATER-BASED PAINTS

Maxicolor, Tintabella, spray , Supertempera, Candy

ANTI-MOULDGermosol, Germo fix, Germostop, Germocide, Germo-kill, Germopaint, Isothermica

pag. 1 di 28


pag. 18

pag. 18

pag. 19

pag. 20

pag. 21

pag. 21

pag. 22

pag. 23

pag. 24-25

pag. 26

pag. 27

pag. 28

PAINT REMOVERS AND UNIVERSAL COLOURINGS

PRODUCTS ON REQUEST

Decazin, Ferbel, Nero Imperial catramina, Carbolineum 1°, Catrame liquido

Interamianto 257, Incapsulo AP163, Coverbit murale, Protex legno, Biowood

Beton colorPROTECTION OF FACING CONCRETE

Intocap

Superstrada, Sint-al 600, Nuovo Segnalinee

Owatrol, Oleorex, Idrorex, Flexigum, Colorgum 100, Silimat Murale, Rep-SIL, Idrorep

SILOXANES

WASHABLE QUARTZ PAINTS FOR EXTERIORS

ELASTOMERICS

FILLERS - STUCCOS AND NON-SHRINK MORTAR

SPECIAL PRODUCTS

WALL COATINGS

Collarasante, Maltanova, Cempexo, Stuccoben, Ben Hur

SQS linking ground, Contact plus, Twin Ground

Rasasil, Primersil, Intosil, Idrosil, Quarzosil

BUILDING RANGE

OTHER COMPLEMENTS

Magnum 5 Stelle, Realquarz

ELASTOfond 03, ELASTOquarz, ELASTOriv 1.2

Atomich, Atomich Murale, Unisystem, Iridex, Ossidi di Ferro

LINKING GROUNDS

PRODUCTS ON REQUEST

pag. 2 di 28


and humidity is higher, and some unsightly looking, translucent and

sticky leakages could appear.

This temporary phenomenon, does not affect the performances of the

products and may be removed by washing or waiting for the next rainfall

event.

In unsuitable conditions, the application of the products is adversely

affected in drying times, and the achievement of the optimal appearance

and performance could be compromised.

WARNING

Apply products in suitable climatic conditions as mentioned in the

relevant technical sheets.

The physiological deterioration of the product or its colour over time is

not a sign of nonconformity of the same.

Not matured plasters and patches can cause fading, stains and

appearing of efflorescences.

In ideal weather conditions, drying and physical crosslinking occur in

about 7 days; yet, drying may take longer when temperatures are lower

pag. 3 di 28


DESCRIPTION COLOURS CODE

Bright silicon enamel RESIOL "lucido"Extra-bright silicon enamel

for exteriors and interiors colour chart

RESIOL "gloss"RESIOL "matt" 001-002 • Kgs 20

Thinness 5-10% with Sintesol synthetic solvent 015-031 • Kgs 4

Application: brush – roller – spray

Yield: 9-10 m2/kg

miniCOLOR Resiol colour chart

000 – 001 – 050 – 051 – 013 – 021 – 024 standard 001.5L Lts 0,125

031 – 034 – 038 – 933 – 999

Resiol strong 002.5L Lts 0,125

025 – 030

Synthetic enamel HILTOMAR colour chart

Standard synthetic enamel for interiors standard 007.4L Lts 2,5

and exteriors 007.2L Lts 0,75

007.3L Lts 0,375

Thinness 3-10% with Sintesol synthetic solvent strong 008.4L Lts 2,5

Application: brush – roller – spray 225 - 226 - 230 008.2L Lts 0,75

Yield: 10-12 m2/lt 008.3L Lts 0,375

Micaceous enamel OTTOCENTO Anti-corrosive synthetic enamel 109 graphite 359.4L Lts 2,5

with ancient, micaceous effect 104 anthracite 359.3L Lts 0,75

Thinness: 3-10% with Sintesol synthetic solvent

Application: brush – spray

Yield: 8-10 m2/lt

Quick drying enamel AGRICOLOR "gloss" gloss white

Anticorrosive, lucid, quick drying, standard RAL 350.2L Lts 2,5

synthetic enamel 350.3L Lts 0,75

strong RAL 351.2L Lts 2,5

Yield: 8-10 m2/lt 351.3L Lts 0,75

AGRICOLOR "gloss"AGRICOLOR "matt" 350-351 • Kgs 20

Thinness: spray 10-15% with NITROsol 352-353 • Kgs 4

brush 5-10% with SINTEsol


Yield: 7-8 m2/kg

UNISYSTEM tinting system

• available on request, in industrial packaging

PACK.



Solvent-Based ENAMELS

pag. 4 di 28



Primer-finish suitable for zinc NUOVO GALVANT Anti-corrosive satin primer-finish for iron, particularly matt black 047.6N • Kgs 20

suitable for galvanized supports and PVC.

For the aging of galvanized supports 047.6N • Kgs 20

we recommend "water-based" DECAZIN 047.4N • Kgs 4

Thinness: max 15% Sintesol synthetic solvent


Yield: 8-10 m2/kg

Rustproof F.D. ANTIFOS Fast drying rustproof primer, overcoatable with 003 pearl gray 063.3L Lts 2,5

synthetic - nitro - R.E. - polyurethane enamels 063.4L Lts 0,5

NITRO RESISTANT 063.6N • Kgs 26

Thinness: 5-10% with Sintesol synthetic solvent 063.3N • Kgs 5

10-15% with Nitrosol nitro solvent


Yield: 8-10 m2/lt – 6-7 m2/kg

Traditional rustproof SIVIFER glycerophtalic anti-rust with anti-corrosive grey 070.2L Lts 2,5

pigments, overcoatable with synthetic enamels oxide red 070.3L Lts 0,5


10-15% with Nitrosol nitro solvent


Yield: 6-8 m2/lt

Primer SIVIOPAC Matt filler for wood and walls matt white 079.2L Lts 2,5

easy to sand 079.3L Lts 0,5



Yield: 10-12 m2/lt

ODOURLESS anti-smoke smell COPRIMACCHIA antifumoIt blocks most stains on the walls including white colour 607.1L • Lts 15

smoke - nicotine - humidity - soot etc.

Thinness: 5-15% with Aquarex odourless solvent

Application: brush – roller

Yield: 8-10 m2/lt

• Product available on request




Ral 7035 grey

PACK.

RUSTPROOF Products - Solvent-Based PRIMERS

pag. 5 di 28



Enamel L'ALTROSMALTO colour chart

Odourless, water-based acrylic enamel suitable standard 012.1L Lts 15

for interior and exterior bright finishes 012.2L Lts 2,5

012.3L Lts 0,75

strong 013.1L • Lts 15

013.2L Lts 2,5

013.3L Lts 0,75

standard RAL or 012.1L • Lts 15standard-pastel 012.9L • Lts 5

Thinness: max 5% with water strong RAL or 013.1L • Lts 15

Application: brush – roller – spray bright for interiors013.9L • Lts 5

Yield: 10-12 m2/lt 013.1L • Lts 15

• product available on request 013.9L • Lts 5

Rustproof primer IDROPRIMER universalewater-dilutable rustproof primer, suitable for wood, grey 018.2L Lts 2,5

iron, galvanized supports, aluminum, PVC, etc. Ral 7035 018.4L Lts 0,75

Thinness: 2-10% with water

Application: brush - roller - spray - dipping

Yield: 8-9 m2/lt (1 coat)

Primer finish paint RADIATOR Water-based primer/finish paint suitable for steel satin white 122.1L Lts 15

- cast iron - and aluminum radiators. 122.2L Lts 2,5

122.5L Lts 0,75



Yield: 7-8 m2/lt

Rust converter OXIFER IT PREVENTS, BLOCKS AND CONVERTS RUST milk white 077.2L Lts 4

077.4L Lts 0,375

when dry, it becomes BLACK ANTHRACITE 077.5L Lts 0,125

Thinness: max 0-5% with water only for spray application


Yield: 16-18 m2/lt

ECOLOGICAL Range - odourless, water-dilutable products


white 800-glossy 900-

eggshell satin

606-607 608-609

extra bright for interiors

PACK.

pag. 6 di 28



Paint IDROFLATTING U.V. Water-based transparent and protective paint transparent 118.6L Lts 20

NOT FLAKING AND WATER-REPELLENT gloss 118.2L Lts 2,5

118.4L Lts 0,75

transparent 118.6L Lts 20

satin 118.2L Lts 2,5

Thinness: ready to use 118.4L Lts 0,75


Yield: 12-14 m2/lt

lacquered effect wood primer IDROWOOD water-based penetrating sealer transparent 119.6L Lts 20

with LACQUERED EFFECT satin 119.2L Lts 2,5

119.3L Lts 0,75

Thinness: ready to use dark walnut 119.6L • Lts 20

Application: brush – spray mahogany 119.2L Lts 2,5

dipping walnut 119.3L Lts 0,75

Yield: 14-16 m2/lt rosewood

• product available on request douglas

PACK.

ECOLOGICAL Range - odourless, water-dilutable products

pag. 7 di 28



Penetrating sealer LEGNOLACK Protective finish with impregnation properties transparent 024.1L Lts 15

suitable for wood satin 024.2L Lts 2,5

LACQUERED EFFECT 024.3L Lts 0,75

dark walnut 024.1L • Lts 15

Thinness: 0-4% with Sintesol synthetic solvent durmast 024.2L Lts 2,5

Application: brush – spray antique walnut 024.3L Lts 0,75

dipping mahogany

Yield: 14-16 m2/lt walnut

• product available on request douglas

Penetrating sealer MICOTEX LEGNO Penetrating sealer for wood preservation transparent 022.1L Lts 15

against mould, fungi and bacteria satin 022.2L Lts 2,5

022.3L Lts 0,75

Thinness: ready to use colour chart 023.1L • Lts 15

Application: brush – spray 023.2L Lts 2,5

dipping - pad 023.3L Lts 0,75

Yield: 14-16 m2/lt

• product available on request

Varnish suitable for wood REGENT Urethane, thin, monocomponent varnish transparent 025.1L • Lts 15

ideal for exteriors gloss 025.2L Lts 2,5

025.3L Lts 0,75

Thinness: 3-10% with Sintesol synthetic solvent transparent 027.1L • Lts 15

Application: brush – spray satin 027.2L Lts 2,5

Yield: 12-14 m2/lt 027.3L Lts 0,75


VAMPIRO preventive and curative liquid transparent 634.2L Lts 5

against all wood attacking insects 634.3L Lts 1

Suitable for all kind of essences

Thinness: ready to use

Application: brush – dipping - injection

Yield: not quantifiable

anti woodworm, solvent-based product

PENETRATING SEALERS, solvent-based PAINTS SUITABLE FOR WOOD

PACK.

pag. 8 di 28


DESCRIPTION COLOURS CODEFire resistant and intumescent paint

Years of successful co-operation with qualified suppliers allowed

CERTIFIED PRODUCTS

PACK.

Full service with technical reports and calculation of requested material

for the fire reaction (class 1)

and for the increase in the fire resistance

to offer FIRE RESISTANT and INTUMESCENT products

available for wood, steel and wall supports

FIRE RESISTANT AND INTUMESCENT PAINTS

(on request)

pag. 9 di 28



Synthetic thinner SINTEsol Universal thinner colourless 310.2L Lts 5

ideal for synthetic products and chlorinated rubber 310.3L Lts 1

(enamels – primers – rust inhibitors)

310.5L • Lts 25

Nitre thinner NITROsol anti-fog thinnerStandard thinner ideal for nitre and synthetic 308.2L Lts 5

products, R.E. and central reservation colourless 308.3L Lts 1

(enamels – primers – rust inhibitors)

308.6L • Lts 200

308.5L • Lts 25

Odourless thinner AQUAREX INODORODearomatized odourless thinner colourless 309.3L Lts 1

ideal for general synthetic products,

and suitable for COPRIMACCHIA ANTIFUMO products

ODOURLESS



THINNERS formulated with pure raw materials

UNREGENERATEDPACK.

pag. 10 di 28



Solvent-based fixative FIS-SOL "prontouso"Solvent-based penetrating sealer transparent 106.2L Lts 25

ideal for exteriors, based on Goodyear pliolite 106.3L Lts 5



Yield: 6-7 m2/lt

water-based fixative HARZ-ACRIL Vinyl acrylic fixative transparent 114.6L Lts 20

ideal for interior and exterior walls 114.3L Lts 5

114.5L Lts 1

Thinness: 1 part over 4 water


Yield: 4-5 m2/lt

Consolidating fixative MURACRIL Water-based acrylic sealer ideal for exteriors, transparent 116.6L Lts 20

with high penetration capacity 116.3L Lts 5



Yield: 5-6 m2/lt

Nanotecnology NANOFIX

Acrylic primer for interior/exterior walls transparent 135.6L Lts 20

based on nanoparticles in emulsion 135.3L Lts 5

135.5L Lts 1

thinness: 1 part nanofix + 1 part water white 140,1L Lts 15

application: brush colours (no TC) 140,1L Lts 15

Yield: 6 m2/lt

Siloxane fixative PRIMERsil Consolidating acryl-siloxanic fixative transparent 210 6L Lts 20

210.3L Lts 5

Thinness: 1 part over 1 with water


Yield: 5-6 m2/lt

FIXATIVES AND SEALERSPACK.

pag. 11 di 28



Professional paint MAXICOLOR Breathable wall paint with high covering power white 207.1L Lts 15



Yield: 7-8 m2/lt

Extra wall paint TINTABELLA Semi-washable breathable paint white 217.1L Lts 15

GOOD COVERAGE 217.3L Lts 5

colour chart

002 - 004 218.1L Lts 15

006 - 007 - 009 218.3L Lts 5


Application: brush – roller – spray 218.1L Lts 15

Yield: 7-8 m2/lt pastel

"spray" paint AIRLESS ideal for interiorssemi-washable, high coverage paint white 220.1L Lts 15

MICRONIZED formula TC2407 ice


Application: brush – roller – spray 220.1L Lts 15

Yield: 7-8 m2/lt pastel

Wall paint SUPERTEMPERA semi-washable breathable wall paint white 209.1L Lts 15

high coverage 209.2L Lts 10

209.3L Lts 5

209.5L Lts 2,5

Thinness: 20-30% withf water


Yield: 6-7 m2/lt

Tempera paint CANDY Wall tempera paint for interiors white 221.1L Lts 15



Yield: 6-7 m2/lt

PACK.

TC2482 ice - TC2860 ivory available on request - minimum 80 pcs

TC 3633 ivory available on request - minimum 80 pcs


PAINT FOR INTERIOR WALLS


pag. 12 di 28



Water-repellent paint SIVICOLOR Water-repellent, washable, breathable white 095.1L Lts 15

and self-cleaning paint with high coverage 095.2L Lts 4

ideal for interiors and exteriors 095.4L Lts 0,75

colour chart 096.1L Lts 15

096.3L Lts 4

096.4L Lts 0,75


Application: brush – roller – spray pastel 096.1L Lts 15

Yield: 8-9 m2/lt

SIVICOLOR standard coloursWashable, breathable paint 097.1L Lts 15

with high dye concentration 001 - 002 097.3L Lts 4

003 - 004 097.4L Lts 0,75

098.1L Lts 15

Thinness: 20-30% with water 011 - 012 - 013 098.3L Lts 4

Application: brush – roller – spray 014 - 015 - 016 098.4L Lts 0,75

Yield: 8-9 m2/lt

BICOLOR white breathable water-based titanium paint white 102.1L Lts 15

ideal for interiors with high coverage 102.3L Lts 4


Application: brush – roller pastel 102.1L Lts 15

Yield: 7-8 m2/lt

thin-based colours

Breathable paint for interiors

BREATHABLE WATER-REPELLENT PAINTS


PACK.

oxide-based colours


pag. 13 di 28


DESCRIPTION COLOURS CODE PACK. 0

Washable paint for exteriors BAROZZI PAINT Extra washable premium quality acrylic paint white 174.1L Lts 14

ideal for exteriors 174.3L Lts 5

174.4L Lts 0,75

standard-pastel 174.1L Lts 14

174.3L Lts 5

bright 174.1L Lts 14

Thinness: 30-40% with water 174.3L Lts 5

Application: brush – roller – spray extra bright 174.1L Lts 14

Yield: 8-9 m2/lt 174.3L Lts 5

Nanotechnology DIVINA Washable, water-based paint for interiors white 194.2L Lts 14

with high covering power. Easy to paint

LOW V.O.C. CONTENT

Thinness: 30% with water


Yield: 9-10 m2/lt

Washable paint for interiors DECORPAINT Washable, acrylic, water-based paint white 181.1L Lts 15

breathable and eco-friendly


Application: brush – roller – spray standard-pastel 181.1L Lts 15

Yield: 8-10 m2/lt

WASHABLE WATER-BASED PAINTS



pag. 14 di 28



Breathable paint ECOPAINT BreathableBreathable water-based paint for interiors white 129.2L • Lts 14

with high coverage 129.4L • Lts 4

V.O.C. free

NO



Yield: 8-10 m2/lt


(minimum batch: 600 lts)

water-repellent paint ECOPAINT Water-repellentBreathable water-repellent, water-based paint white 130.2L • Lts 14

for interiors, with high coverage and yield

V.O.C. free

Thinness: 30-40% with water NO


Yield: 10-11 m2/lt


(minimum batch: 40 pcs)

Washable paint ECOPAINT WashableWashable water-based paint for interiors white 131.2L • Lts 14

with high coverage and yield

V.O.C. free

Thinness: 35-40% with water NO


Yield: 11-13 m2/lt


(minimum batch: 40 pcs)


ECO-FRIENDLY PRODUCTS, V.O.C. free



PACK.

pag. 15 di 28



Detergent GERMOSOL Anti-mould bacterical detergent transparent 201.3L Lts 5

201.5L * Lts 0,5

Thinness:: ready to use


Yield: 8-10 m2/lt

* spray

Disinfectant GERMO FIX Disinfectant for fungi and bacteria transparent 200.6L Lts 20

ideal for interiors. 200.3L Lts 5

it prevents mould formation 200.4L Lts 1



Yield: 9-11 m2/lt of solution each coat

Disinfectant for exteriors GERMOSTOP ready to useAnti-mould and ANTI-ALGAE treatment transparent 204.6L Lts 20

specific for exterior northern walls. 204.3L Lts 5


Application: brush

Yield: 5 m2/lt

Additive GERMOCIDE Anti-mould additive for water-based paints neutral white 205.5L Lts 0,5

non covering


Application:

To be added directly

lts 0,5 Germocide per lts 5 of water-based paint

PACK.

ANTI-MOULD

pag. 16 di 28



anti-mould water-based paint GERMO-KILL Water-based paint for hard interior wall surfaces white 203.1L Lt 15

with high anti-mould and sanitizing properties

Thinness: 30% with water


Yield : 8-9 m2/lt

anti-mould water-based paint GERMO PAINT Special breathable paint for interior wall surfaces white 202.1L Lt 15

with antibacterial properties. 202.3L Lt 4

202.4L Lt 0,75



Yield: 8-9 m2/lt

Anticondensation paint ISOTHERMICA Breathable water-based paint for interiors with white 191.1L Lt 15

anticondensation, anti-mould. 191.4L Lt 4

Sound absorbing properties.



Yield: 1st coat 6-8 m2/lt

2nd coat 3-4 m2/lt (200 microns)

ANTI-MOULDPACK.

pag. 17 di 28



Algae resistant MAGNUM 5 stelle Extra washable quartz acrylic paint white 182.1L Lts 15

medium flexibility

algae resistant for exteriors


Thinness: 15-20% with water bright 182.1L Lts 15

Application: brush – roller extra bright 182.1L Lts 15

Yield: 7-8 m2/lt

For interiors and exteriors REALQUARZ Quartz paint for interior and exterior surfaces white 178.1L Lts 15

178.3L Lts 5



Application: brush – roller bright 178.1L Lts 15


DESCRIPTION COLOURS CODE PACK.

Paint for concrete BETON color water-resistant covering water-based paint white 180.1L Lts 14

for the protection of exposed concrete


Thinness: 10-20% with water bright 180.1L Lts 14

Application: brush – roller – spray extra bright 180.1L Lts 14

Yield: 10-11 m2/lt

PACK.

PROTECTION OF FACING CONCRETE



about prices and delivery times

To ask for sample colours, talk to the Sales Offic e


WASHABLE QUARTZ PAINTS FOR EXTERIORS

pag. 18 di 28



Covering primer SQS LINKING GROUNDUniforming primer for acrylic, siloxanic

water-based paints and silicates white 216.1L Lts 15

(granulometry 0,7 mm.) pastel colours 216.1L Lts 15

Ideal on plasterboard to obtain

plaster effect



Yield: 5-6 m2/lt

Overpaintable after 6/8 hours

Linking ground CONTACT plus Acrylic uniforming linking ground, added with fibers

(granulometry 0,7 mm.) white 219.1L Lt 15

Ideal on plasterboard to obtain pastel colours 219.1L Lt 15

plaster effect



Yield: 3-4 m2/lt

Overpaintable after 6/8 hours

Linking ground TWIN GROUND Medium-grained pigmented acrylic linking ground

(granulometry 0,3 mm.) with filling and uniforming white 223.1L Lts 15

properties for smooth or irregular surfaces. pastel colours 223.1L Lts 15

Ideal on plasterboard to obtain

plaster effect




Overcoatable after 6/8 hours

LINKING GROUNDS

pag. 19 di 28



Leveling RASAsil Siloxanic leveling with uniforming property white 214.1L Lts 15

for deteriorated walls coloured 214.1L Lts 15


Application: brush

Yield: 4-6 m2/lt

Fixative PRIMERsil Consolidating acryl-siloxanic fixative transparent 210 6L Lts 20

210.3L Lts 5

Thinness: 1 part over 1 with water


Yield: 5-6 m2/lt

Plaster INTOSIL Waterproof siloxanic coating white 588.2N Kgs 25

ANTI-ALGAE, plaster effect

Thinness: ready for use standard-pastel 588.2N Kgs 25

Application: stainless steel float + plastic bright 588.2N Kgs 25

Yield: 2-2,2 m2/kg extra bright 588.2N Kgs 25

water-based paint IDROsil Water-based acrylic paint for exteriors white 215.1L Lts 15

modified with siloxanes.

Waterproofing and ANTI-ALGAE properties

Thinness: 15-20% with water standard-pastel 215.1L Lts 15


Yield: 8-9 m2/lt extra bright 215.1L Lts 15

quartz paint QUARZOsil Protective siloxanic quartz paint white 212.1L Lts 15

for exteriors

breathable, waterproof, ANTI-ALGAE

Thinness: 15-20% with water standard-pastel 212.1L Lts 15






SILOXANES

pag. 20 di 28



Plaster INTOCAP Acrylic coating with PLATER effect. white 154.2N Kgs 25

Thinness: ready to use (max 1%) standard-pastel 154.2N Kgs 25


Yield: 2-2,2 m2/kg (1 coat) extra bright 154.2N Kgs 25


Filling ground ELASTOfond 03 Elastomeric filling ground white 173.1L Lts 15

ideal for micro-crackled supports


Application: brush – roller pastel 173.1L Lts 15


Paint ELASTOquarz Elastomeric quartz finish white 167.1L Lts 15

waterproofing, permanent flexibility

fibre-reinforced

Thinness: 5% with water standard-pastel 167.1L Lts 15



Plaster ELASTOriv 1.2 Elastomeric coating white 170.2N Kgs 25

PLASTER effect

anti-algae, fiber reinforced

Thinness: ready for use standard-pastel 170.2N Kgs 25


Yield: 2 m2/kg (1 coat) extra bright 170.2N Kgs 25

WALL COATINGS




ELASTOMERICS


pag. 21 di 28



Fibre-reinforced COLLARASANTE Fibre-reinforced bicomponent adhesive and leveling quartz grey 540.1N Kgs 25

paste for thermal insulation composite systems

Thinness: 1:1 Collarasante: concrete + water

Application: stainless steel float or sponge

Yield: 0,5-1 m2/kg

Plaster for levelings MALTANOVA Non-shrink filling mortar light grey 537.2N Kgs 25

for internal and external shaving and plastering

it does not drop or crack, invisibile touch-ups

work with clean water till you get

the desired consistency. AVOID HUMIDITY

Thinness: water (5-6 Lts each sack)

Application: stainless steel float or sponge

Resa: 1,5-1,8 m2/kg for 1mm thickness

CEMPEXO Special breathable paint-coating white 595.1N # Kgs 25

against humidity and spots grey

Thinness: water – 25% brush 18% palette knife

Application: brush – palette knife


# packaged in gross weight

Paste plaster STUCCOBEN French paste plaster white 233.2N Kgs 5

for wood and masonry 233.3N Kg 1

233.4N Kgs 0,5

Thinness: ready for use 233.5N Kgs 0,25

Application: palette knife


Powder plaster BEN HUR Filling powder plaster for white 235.1N Kgs 25

wood, walls and minor plaster constructions 235.3N Kgs 5

235.4N Kg 1

Thinness: 2:1 ben hur : water

Application: palette knife – float


Leveling for: plasterworks - crackled facades - plasterboard - coat

Paint-Coating against humidity

FILLERS - STUCCOS AND NON-SHRINK MORTAR

Adhesive for: ceramics - skirting board - polystyrene - electrical boxes - fill-ins

pag. 22 di 28



Universal ATOMICH Strong universal paint remover NOT FLAMMABLE transparent 250.1L Lts 17

for enamels - paints - grounds 250.3L Lts 4

FREE FROM METHYLENE CHLORIDE 250.4L Lts 0,75

Thinness: ready for use

Application: brush – pad – palette knife


Mural ATOMICH murale Strong paint remover NOT FLAMMABLE transparent 249.1L Lts 17

for water-based paints - wall plastic coatings 249.3L Lts 4

FREE FROM METHYLENE CHLORIDE


Application: brush – pad – palette knife


Colourings UNISYSTEM Universal colourings oxides 229.5L Lts 0,5

for the colouring and correction of LW1 yellow ox

water-based paints - plastic coatings - enamels LW11 red ox

lime-based products, etc. LW41 black

LW21 burnt sienna

LW - for interiors and exteriors thin: 230.5L Lts 0,5

L - ONLY for interiors LW51 bleu

LW62 bright green

L2 sun yellow

Thinness: ready for use L12 bright red

L32 orange

Universal colourings IRIDEX Concentrated universal colourings for

water based and solvent based products 227.3 ml 40


227.5 ml 20

Powder oxides OSSIDI DI FERRO Powder iron oxides yellow 361.4N Kgs 0,5

red 362.4N Kgs 0,5

black 363.4N Kgs 0,5

brown 364.4N Kgs 0,5

concrete blue 365.4N Kgs 0,5

chrome green 366.4N Kgs 0,5

PAINT REMOVERS AND UNIVERSAL COLOURINGS

10-forest green 20-bright red

30-oxide black 50-violet

60-oxide brown 70-lemon yellow

90-orange 110-grass green 120-oxide yellow

130-blue 140-chrome

yellow 220-oxide red

pag. 23 di 28



Anti rust bloom OWATROLAnti rust bloom product transparent AC9.3L Lts 5

and additive for synthetic enamels AC9.5L Lts 0,5


OLEOREX 50Fluorinated solvent-based protective transparent 036.1L Lts 25

with water-oil repellent effect 036.2L Lts 5




IDROREX 50Fluorinated water-based protective NON-TOXIC transparent 038.6L Lts 20

with water-oil repellent effect 038.3L Lts 5




IDROREX 200Concentrated fluorinated water-based protective transparent 040.6L Lts 20

NON-TOXIC with water-oil repellent effect 040.3L Lts 5

IDEAL for CONCRETE TANKS used

for permanent containment of water



Yield: 5 m2/lt (1 coat)

Fluorinated solvent-based protective

Fluorinated water-based protective

Fluorinated water-based protective

• available on request, in

industrial packaging

SPECIAL PRODUCTS

• lts 50 - 200 - 1000

• lts 50 - 200 - 1000

• available on request, in

industrial packaging

pag. 24 di 28



Membrane FLEXIGUM Waterproofing flexible membrane white 162.1L Lts 15

for roofs and terraces 162.2L Lts 5

Thinness: max 20% with water

Application: brush - roller - spray

Yield: 3 m2/lt each coat

Clorinated rubber enamel COLORGUM - 100Pure clorinated rubber finish and plasticizers 612.4N • Kgs 4

for swimming pools, floors, waterproofings standard RAL 613.4N Kgs 4

and maintenance in marine environment strong RAL 612.4N Kgs 4

Thinness: 1st coat 15% - subsequent coats 10% 613-612 • Kgs 20

with Sintesol synthetic thinner

Application: brush - roller - spray

Yield: 5-6 m2/kg

Silicon protective SILIMAT muraleRain-proof protective silicon filler transparent 035.1L Lts 25

FOR UPRIGHT SURFACES 035.2L Lts 5

water-repellent for porous and face view buildings 035.3L Lts 1

IT DOES NOT CHANGE THE ASPECT OF THE SUPPORT

Thinness: 5% with Sintesol synthetic thinnerApplication: brush – roller – spray APPLY 2 COATS TO REACH SATURATION

Yield: 8-10 m2/lt

Water-repellent solvent REP-SIL Highly water-repellent solution transparent 037.1L Lts 25

for absorbent minor constructions 037.2L Lts 5

IT DOES NOT CHANGE THE ASPECT OF THE SUPPORT

Thinness: ready to useApplication: brush – roller APPLY 1 COAT TO REACH SATURATION

Yield: 5-6 m2/lt

Water-repellent solution IDROREP Water-repellent silicon water-based solution transparent 039.7L Lts 20

(suitable for plaster) 039.2L Lts 5

Thinness: ready to useApplication: brush – roller APPLY 1 COAT TO REACH SATURATION

Yield: about 5-6 m2/lt (according to the support)

• available on request

002 swimming pool blue

SPECIAL PRODUCTS


pag. 25 di 28



Detergent for zinc supports DECAZIN "all'acqua"Detergent and degreasing solution transparent 051.7L Lts 20

FOR ZINC-COATED SUPPORTS 051.1L Lts 5

fast ageing


Application: brush – dipping

Yield: 18-20 m2/lt

Degreaser for iron FERBEL Water-based industrial detergent-degreaser colourless 312.1L Lts 5

for iron minor constructions


Application: brush – rag – dipping

roller – spray


Tar NERO IMPERIAL "catramina"Black paint for iron, scaffolds, pipings and tanks bright black 274.6N Kgs 4

to be laid underground 274.5N Kgs 1

Thinness: spray NITRO/SINTEsol all that is necessary

brush 5-10% SINTEsol 274.1N • Kgs 200

Application: brush – spray – dipping 274.3N • Kgs 20

Yield: 7-8 m2/kg


Chemical distillate CARBOLINEUM 1° RESINATE matt black 276.1N • # Kgs 200

Liquid chemical distillate compound 276.6N # Kgs 18

275.4N # Kgs 4

Thinness: ready to use 275.5N # Kgs 1

Application: brush – spray – dipping

Yield: 5-6 m2/kg



CATRAME LIQUIDOLiquid chemical distillate 279.5N # Kgs 18

278.4N # Kgs 4

278.5N # Kgs 1



OTHER COMPLEMENTS

pag. 26 di 28



For removal INTERAMIANTO 257 Insulating - fixative - inertizing for the removal type 000 112.6L Lts 20

of concrete/asbestos minor constructions (ready for use)

(encapsulation type D) type 050 113.6L Lts 20

colours: red/transparent green + on request (thin. 2:1 water)

type 100 134.6L Lts 20

(thin. 1:1 water)

type 300 126.6L Lts 20

Application: brush – roller – spray (thin. 1:3 water)

Yield: 4-5 m2/lt when thinned

For encapsulation INCAPSULO AP163 Protective paint for encapsulation white 165.xL Kgs 20

of concrete/asbestos minor constructions grey 165.xL Kgs 8

red

Thinness: 1st coat 40% - 2nd coat 10% with water oxide green


Yield: please see data sheet

Water-based enamel COVERBIT muraleWater-based acrylic enamel white 625.1L Lts 15

for basements and footings 625.3L Lts 5


625.3L Lts 5

bright for interiors 625.1L Lts 15


Application: brush – roller 625.1L Lts 15


Penetrating wood sealer PROTEX Legno Solvent-based penetrating wood sealer 020.2L Lts 15

Thinness: ready to use coloured 020.2L • Lts 15

Application: brush – dipping

Yield: 14-16 m2/lt

• product available on request = minimum 100 Lts

Penetrating wood sealer BIOWOOD Water-based penetrating wood sealer 125.2L Lts 15

coloured 125.2L Lts 15


Application: brush – spray – dipping

Yield: 10-12 m2/lt

satin transparent

PRODUCTS ON REQUEST

on request: industrial packagings

Approved and Certified

extra bright for interiors


satin transparent

pag. 27 di 28



Central reservation line SUPERSTRADA Paint for central reservation lines

refracting white 617.1N Kgs 30

not refracting 620.1N Kgs 30

Thinness: 8-10% with Nitro thinner Nitrosol


Yield: 5-7 m2/lt

Aluminium paint SINT-AL 600 Silicon aluminium paint for bright 005.6L • Lts 15

working temperature up to 600° C aluminium 005.4L Lts 4



Yield: 10-12 m2/lt


Paint NUOVO SEGNALINEE Ecological paint for football fields white 621.1L Lts 15

Thinness: up to 300% with water

Application: spray


PRODUCTS ON REQUEST

pag. 28 di 28

EDILIZIA listino lordo-netto + catalogo - EN · UNISYSTEM tinting system Ral 7035 grey PACK....

Documents

Transcript of EDILIZIA listino lordo-netto + catalogo - EN · UNISYSTEM tinting system Ral 7035 grey PACK....