EdgeFX Hi-Tech Innovation, Design and

Hardware Prototyping, Entrepreneurship Lab

For Universities / Colleges

in

• Electronics (Including General Electronics, Instrumentation, Sensors) • Robotics

• Electrical (Power Electronics, Core Electrical, Power Systems) • Communication and IOT.

The pain point we are addressing at EdgeFX is deep rooted in the education system worldwide.

Education today is repetitive rote learning and regressive which needs to be replaced with an

evolving upward spiral in the education system which is progressive, pleasurable and exciting.

This shift can happen by creating practical experiences for the students and thus kindle the spirit of

innovation. We at EdgeFX are striving to create one such environment with our products and

solutions to empower the students with technology to change the world.

Problem and Solution

Why EdgeFX Innovation Lab

Existing Labs in Higher Education EdgeFX Innovation Lab

Designed for guided experimenting.Are for open-ended experimenting, with no single

solution.

May have expensive or fragile euipment.

Have equipment appropriate to the age of the intended

students so that they can tinker without the fear of

damaging equipment.

Have a static design. Are intended to evolve with the institution.

Activities correspond to topics in text books.Are intended towards life and creative skills, certainly not

limiting to academics.

Have a fixed curriculum.Have a directional curriculum that is not restrictive.

Provides students with the scope to create and innovate.

About

EdgeFX Hi-Tech Innovation Lab for Universities and Colleges.

EdgeFX specializes in setting up Hi-tech Innovation Centres in Universities and Colleges, introducing

a range of products from Beginners Kits to Advanced kits packed with ‘Train the Trainer’ programs,

resources including lesson plans and exhaustive audio-visual content and open source hardware

licenses and analytics to enable innovation and entrepreneurship among the students.

Target: Universities and Colleges worldwide.

Why Edgefx Kit: Real solutions creating practical experiences.

Areas: Electronics, Electrical, Power Electronics, Communication, Robotics.

Latest technologies including Arduino, IoT, CRO, and Non-Microcontroller projects.

Designed to create 1500+ experiments empowering students to innovate.

Exhaustive Documentation, Audio-Visuals and Datasheets.

Methodology: Project based learning.

Support: Train the trainer with exhaustive support.

S.No. Product Description Target

1 EdgeFX DIY STEM Learning and Innovation Kits for

Beginners

Beginners

2 EdgeFX DIY Innovation Lab Kit for Basic to Advanced level

Learning and Innovation Beginners to Advanced

Beginners to

Advanced

3 EdgeFX DIY Soldering Kits for High Technology Innovation

Advanced

Advanced

1. EdgeFX DIY STEM Learning and Innovation Kits for Beginners

Objective: To help students learn the fundamentals and innovate thereafter.

EdgeFX DIY STEM Kits are based on reusable, color-coded electronic building blocks, designed for

ease of use and to feed the curiosity of young minds. EdgeFX STEM Kits come with extensive Audio-

Visuals and exhaustive documentation including Assembly Procedure and Troubleshooting with

physical diagram, project image and circuit diagram with explanation. Choose from a range of 200+

Real world application projects and fun-filled activities and experiments in Electronics, Arduino and

Robotics.

2. EdgeFX DIY Lab Kit for Basic to Advanced level Learning and Innovation

Objective: To help students with project based learning, innovation and prototyping from

basic to advanced level in Embedded, Communications, Robotics, IOT, Electrical, Power

Electronics.

EdgeFX DIY Innovation Kit consists of simple to high level Breakout boards to carry out 1500+

practical, real-time projects in Embedded, Communications, Robotics, IOT, Electrical, Power

Electronics from beginners to advanced level.

Product Mix Summary

Most suitable for: B.Tech I - IV Years

Arduino Robotics Electronics

They are all stand alone, modular, open-ended boards with a set of connectors for interconnecting

them with jumper wires. The Breakout boards and projects are powered with circuit schematic,

layout diagram self-explanatory program codes and elaborate documentation enabling further

innovations.

3. EdgeFX DIY Soldering Kits for High Technology Innovation

Objective: To help students learn to use discrete level components and soldering to build

a working hardware prototype.

Includes complete hardware including all discrete solderable components, ICs, modules with plain

PCB, power supply, tool kit, program burner and a controller for building the project. Extensive

documentation for project execution including step-by-step instructions for Circuit building,

Assembly procedure and Troubleshooting.

Thorough understanding from the Problem definition to Circuit Design to Programming, Testing,

Troubleshooting and finally building a working hardware project. Choose from a range of 400+

Solutions.

‘’Empowering Students to Innovate‘’

Most suitable for: B.Tech I - IV Years

Most suitable for: B.Tech III - IV Years

5 Load Relay Driver Module Traffic Junction ModuleArduino Nano Motherboard

LAB INCHARGE

STOREROOM

GROUPDISCUSSION - 1

GROUPDISCUSSION - 2

GROUPDISCUSSION - 3

WORKSHOP - 1

WORKSHOP - 2

WORKSHOP - 3

SO

LD

ER

ING

STA

TIO

N -

1

SO

LDER

ING

STA

TION -

2

COMPUTER

WORKSTATIO

N - 1

COMPUTER

WORKSTATIO

N - 2

Resources

Area: 3000 sq. ft. for 30 students

Workstations: 6ft * 3ft - 3 numbers

Roundtable for Group discussion for 3 students - 3 number

Computer Workstations: 5ft * 3ft - 2 numbers

Soldering Stations: 5ft * 3ft - 2 numbers

Lab In-charge Table: 3ft * 2ft - 1 number

Fan/AC/Lights/Power sockets as per requirement

EdgeFX Innovation Lab

EdgeFX DIY STEM Beginners Learning and Innovation Kits

EdgeFX DIY Innovation Lab Kit for Basic to Advanced level Learning and Innovation

EdgeFX DIY Advanced Soldering Kits for High Technology Innovation

1500+ Projects explained from conceptualization to finalization stage.

Exhaustive Reference Charts, Documentation and Datasheets.

Extensive Lesson Plans and Audio-Visuals.

Open source Hardware Licensing.

Analytics Software for Evaluation of Learning outcome and progress.

Equipment for further experiments and R&D using EdgeFX Kits.

Robust Packaging and Spares provided.

Exclusive Warranty, Updates and Upgrades.

Full-fledged technical and implementation training.

Product Installation and setup.

Technical Support Available on Call, Chat, Skype and email.

Periodical Guest Lectures, Competitions and Technical Activities.

Turnkey Lab Solution Deliverables

A Few Project Examples

Minimizing Penalty in Industrial Power Consumption by Engaging APFC Unit

Solar Powered Led Street Light with Auto Intensity Control

Street Light that Glows on Detecting Vehicle Movement

Three Phase Fault Analysis with Auto Reset on Temporary Fault and Permanent Trip Otherwise

Ultra Fast Acting Electronic Circuit Breaker

War Field Spying Robot with Night Vision Wireless Camera by Android Applications

IOT based Home Automation Over the Cloud

Four Quadrant DC Motor Speed Control with Microcontroller

RFID based Paid Car Parking

ACPWM Control for Induction Motor

Arduino based Underground Cable Fault Detection

Auto Metro Train to Shuttle between Stations

Density Based Traffic Signal with Remote Override in Emergency

Detecting Power Grid Synchronization Failure on Sensing Frequency or Voltage Beyond

Acceptable Range

GSM based Monthly Electricity Energy Meter Billing and SMS upon GSM with User

Programmable Number Features together with Onsite Display to the user

Company Profile

EdgeFX Technologies Pvt. Ltd. is a Edtech company having 20 years of experience in education and

training industry. We sell our products to more than 50 countries worldwide.

Our Purpose

What started as an idea, turned into passion and now a purpose!

Empowering every student to innovate is why EdgeFX exists. And the way we empower every

student to innovate is by creating best tools which are utmost educative, reliable, simple to use and

user-friendly.

Methodology

Design Thinking: Our experiential understanding of 18+ years about the needs and wants of the

students right from STEM education to higher education has helped us immensely to incorporate

design thinking in building our products. Design Thinking for us is learning by doing.

What We Do

EdgeFX designs and builds unique, powerful and innovative STEM, DIY educational kits in wide

areas of Electronics, Electrical, Embedded, Communication and latest areas like IoT, Arduino,

Raspberry Pi and many more, catering from Grade V to Engineering and beyond.

EdgeFX also specializes in setting up tinkering labs in schools and innovation centres in

Universities/Colleges globally.

The Exciting World of EdgeFX

Kits that take your ideas to thenext level

TINKERERS

Enthusiasts: EdgeFX STEM Kits - Target: Children from 8+ years onwards

Observers: EdgeFX DIY Project Kits - Target: PG/UG Engineering, Polytechnic students

Educators: EdgeFX STEM Tinkering Labs - Target: Schools from Grade V to XII

EdgeFX Innovation centres - Target: Universities and Colleges

Atal Tinkering Lab - Target: Schools selected by NITI for ATL

Tinkerers: EdgeFX Breakout Boards - Target: Tinkerers and Hobbyists.

Customer Segmentation

EdgeFX Kits product validation across the globe

‘’Empowering Students to Innovate‘’