Edge Trim Granulators - summitsystems.co.uk · Summit Systems offers a range of high performance...
-
Upload
hoangkhuong -
Category
Documents
-
view
218 -
download
0
Transcript of Edge Trim Granulators - summitsystems.co.uk · Summit Systems offers a range of high performance...
Summit Systems offers a range of high performance
granulators specifically designed for edge trim granulation.
The recovery of edge trim in sheet extrusion faces the
challenges of new additives, enhanced performance and
lower noise.
The TRK series is quieter and faster than similar products,
operates to a higher thickness and is suitable for
engineered plastics. It provides inline recovery of edge
trims in PS, PP, PET, PA with thickness 0.1-3mm.
Features
Ÿ Dedicated infeed rollers for two edge trims
Ÿ Different rollers surface in relation to material
Ÿ Pneumatic roller closure with automatic
adjustment to thickness
Ÿ Reduced noise level, ~80dbA Leq with edge trim
~1mm thick, 85dbA Leq with ~2.5mm thick
Ÿ Edge trims feeding speed controlled by inverter,
synchronised with extrusion line
Ÿ Gas cylinder and safety bars for lifting of infeed rollers
Ÿ Easy tool free access
Ÿ Ordinary maintenance from one side
Granulators
Edge Trim Granulator
Type A B C D E F G H
40-20 TR-K 1265 1185 970 900 830 420 315 250
50-30 TR-K 1525 1350 1150 1100 1020 500 315 250
Specification 42-20 TR-K 50-30 TR-K
Single infeed rollers x L (mm)Ø 80 x 400 80 x 400
Smooth rollers surface (thk<1.5mm) - -
Rotor speed (rpm) 315 350
0.75
Double infeed rollers x L (mm)Ø x 80 x 200
Rotor diameter (mm) 180 260
Dancing arms for double infeed rollers o o
Motors (kW) [2nd] 4+0.37+[0.37] 7.5+0.37+[0.37]
Stationary blades (no.) 2 2
Throughput (kg/h)* 50/180 150/200
Double infeed rollers x L (mm)Ø 80 x 100 80 x 100
Knurled rollers surface - -
Infeed speed (m/min) 5/100 5/100
Infeed opening (mm) 420 x 20 500 x 20
Rotary blades (no.) 3 3
Screen holes (mm)Ø 7 7
Types of cutting Scissor Scissor
Weight (kg) 700 1000
Gra
nu
lato
rs
Summit Systems assumes no responsibility for any errors or inaccuracies in this catalogue and reserves the right to make changes to the products without prior notice.
Summit Systems, Vanguard, Tame Park, Tamworth, Staffordshire B77 5DYT: +44 (0) 1827 265800 | www.summitsystems.co.uk | [email protected]
TR
IA-T
RK
Ap
r 2
01
6
*depend on speed, thickness and material
x = not available, o = optional