Edelweiss PRO 2013

en

PROFESSIONAL EQUIPMENT

2013wor

k re

stra

int

wor

k po

sition

ing

fall

arr

est

rope

acc

ess

rope

par

ks

cany

onin

g

spel

eolo

gy

arbo

rist

fire

figh

ters

resc

ue

police

militar

y

2INDUSTRIAL TechNoLogy

Coloured filament integrated into the rope indicating

the year of manufacture.

Thin band running through the rope indicating its type, diameter, the standard

it conforms to and year of manufacture.

NB: A security rope is always of core and sheath construction.

The sheath: serves to protect the rope

from abrasion.

The core: the heart of the rope, providing the majority of its

strength.

For over 220 years EDELWEISS has accompanied the mountaineering pioneers and continues today to

be present alongside athletes and professionals in height. With this experience, punctuated by constant

innovation and quality research, we can be a key player in your safety. Our goal remains to connect you

to the life. EDELWEISS Stay connected.

The semi-sTaTic RopesThese are sometimes wrongly called static. They allow access to, and position-ing at the worksite. They have moderate stretch, which allows them to absorb sufficient energy to arrest falls of factor 0.3.

The types of RopesThere are two types of ropes. Type A: Rope for use in rescue, or as a working or security line for work at height. In the latter case it is used for access to the place of work in combina-tion with other items of equipment, or to undertake work under tension or in suspension on the rope. Type B: Rope of lesser diameter and strength than Type A, demanding greater precautions and attention to security during use.

Storage and lifetimeThe working life depends on the frequency and the type of use.Abrasion, UV exposure and humidity gradually degrade the properties of the rope. Note that with use, a rope thickens and thus loses up to 10 % length.

Storage time: In good storage conditions a rope may be kept for 5 years before first use without affecting its future lifetime duration in use.

Lifetime in use: A rope could be destroyed during its first use. It is the inspec-tions which determine if the product must be scrapped more quickly. Proper storage between uses is essential. The lifetime of the rope in use must never exceed 10 years. The total maximum lifetime (storage before use + lifetime in use) is thus limited to 15 years.

The dynamic Ropes In certain work at height, or rescue, situations, you may need to use dynamic ropes, for example for setting up anchorages.

In effect, if you are exposed to positions where the rope could take a fall factor greater than 0.3 it is imperative to use a dynamic rope (EN892), the only type capable of absorbing a resultant fall. (NB the techniques of belaying with dynamic ropes are different to those for semi-static ropes, and necessitate professional training).

The often very hard wear conditions imposed on ropes during work or on rescues means that the toughest choice should be made.

5 m 5 m

2,5 m2,5 m

2,5

m

1 2

5,0 m=

2,5 m

Factor 2

DANGER

5,0 m=

5,0 m

Factor 1

OK

FALL FACTORTotal height of fallLenght of rope used

= Fall factor

1

5 m of fall2,5 m of rope used

= Factor 2 DANGER

Fall factor must always be under 2.

2

5 m of fall 5 m of rope used

= Factor 1 OK

knot

ted

term

inatio

ns

3

WORK AT HEIGHT

knot

ted

term

inatio

ns

TesTed and appRovedFall factor F: The fall factor is the ratio of the length of the fall taken to the length of rope which arrests it.

Impact force IF: This is the force which is transmitted to person, connector and anchor point during the arrest of a fall. The impact force given in the performance tables is that obtained by a fall factor 0,3 with a 100 Kg mass for type A ropes, and an 80 Kg mass for type B ropes. This is required to be less than 6 kN.

Number of falls: The number of falls sustained is determined on a rig which reproduces factor I falls.The terminations on the test length are made with figure of 8 knots. The drop falls are made at intervals of three minutes. Five falls must be sustained, using a 100 Kg mass for type A, 80 Kg for type B.

Elongation E: This is the elongation of the rope which occurs between loads of 50 Kg and 150 Kg. It must not exceed 5 %.

Knotability K: A single overhand knot is tensioned with a 10 Kg weight for one minute, then the internal diameter of the knot is measured with the tension reduced to 1 Kg. The internal diameter divided by the rope diameter: K < 1,2.Sheath slippage S: 2 m of rope is placed in the pulling rig and drawn through it 5 times. Sheath slippage must not exceed 15 mm for type B ropes, and (20 + 10 (D - 9)) mm where D is the rope diameter, for type A ropes.

Shrinkage R: The percentage shrinkage of the rope after soaking in water for 24 hours.

Mass of the sheath: The minimum sheath percentage which must compose the rope is calculated by S = ((4D - 4) / D) x 100 where D is the rope diameter.

Static strength: The force required to break the rope when it is pulled slowly. type A ropes must exceed 22 kN, type B ropes 18 kN.

Static strength with knotted terminations: A sample of the rope terminated with a figure of 8 must withstand for 3 minutes a force of 15kN (type A) 12kN (type B).

Rope identification: The rope has a band fastened at its end indicating its type: Type A or B, its diameter, the name of the manufacturer, and the number of the Euro Norm to which it conforms.

Meaning of markings: CE : Conformity to the European directive0120 : Number of the Notified BodyEN1891 : Technical reference.

euRopean sTandaRdsEDELWEISS production follows a very high technical standard to ensure safety. Our ISO 9001 manufacturing process guarantees consistent quality. Our Personal Protective Equipment meets and even exceeds the relevant EN standards.

Fall factor Impact force Elongation Knotability Static strength with

knotted terminations

Conformity to standards Type

4CONCEPTS

Termination SequoiaTermination QuercusTermination Proline

unicore conceptAn astonishing process, bonding rope sheath and core without affecting the ropes suppleness. Even in the hardest conditions of use sheath slippage is suppressed.If the sheath is cut or torn, core and sheath remain bonded together.With a standard rope, if the sheath is cut by abrasion over an edge, a frequentoccurrence in work at height and in rescues, it slides and gathers over some metres.It then becomes impossible to pass this zone, either to ascend or to descend.If the problem occurs near to the end of the rope the sheath may slide off completely, and the user fall to the ground.With the UNICORE process the sheath remains in place and the user may escape, either by descent or ascent, taking all necessary precautions. He/she is not stuck without a solution on the rope.

temp concept

Polyamid sheath Aramid Polyamid core

EFFECT OF HIGH TEMPERATURES ON ARAMIDThe resistance of Aramid to high temperatures is best illustrated by the graph illustrating the residual strength after exposure to raised temperatures. Thus we may for example see that after 10 hours of exposure at 200C it retains 100% of its strength, or that after 1 hour at 350C it retains 90% of its strength.

Relationship between time of exposure at high temperature and residual strength of Aramid

Exposure time (Hours)

Resid

ual s

treng

th (%

)stitched termination eye

concepTsPerform 3EDELWEISS, at the height of its 220 years of

experience in designing products dedicated to verticality, presents its latest innovation: PERFORM 3. This new development applied to a wide range of dynamic ropesprovides the following benefits: 1. improved flexibility = increased comfort.2. improved energy absorption = increased safety.3. weight reduction = increased performance.

SupereverdryEDELWEISS was the first climbing rope maker to

apply a Supereverdry treatment to its fibres. The benefits of a Supereverdry treatment are self-evident: the ropes are lighter in case of humidity, dry quicker and dont tend to stiffen due to freezing. The Supereverdry treatment is applied to all fibres in the core and the sheath. Comparative

tests demonstrate the superiority of this treatment over competing methods of other manufacturers with respect to durability as well as efficiency.

EverdryEDELWEISS was the first climbing rope maker to apply a Everdry treatment to its sheath. The

benefits of a Everdry treatment makes the ropes lighter in case of humidity, dry quicker and dont tend to stiffen due to freezing. The Everdry treatment is applied only to the fibres of the sheath.

HD CoverHD Cover is a technology through which,

each cover thread is individually controlled, as opposed to standard braiding where the threads are controlled by pairs. With this High Definition braiding and although

the thickness of the sheath remains the same, the rope surface is much smoother than with a standard braiding, the rope doesnt generate extra braking in belay systems and actions become more comfortable; another positive consequence, the wear due to abrasion is also reduced and the rope lifetime accordingly extended.

CanyonEDELWEISS CANYON ropes conception is

really different from the competition.The rope cover sheath uses a combination of the performance of Polyamide and Polyester. The benefits are better abrasion resistance and a shrinkage in water divided by 3. EDELWEISS CANYON ropes remain flexible and manageable throughout their lifetime.

5STaTIC ROPES

PERFORMaNCES

Diameter 10,5 mm

Breaking strength 24 kN

Nb of falls factor 1 12

Impact force factor 0,3 5,6 kN

Static elongation 3,1 %

Sheath percentage 36,4 %

Weight 67 g/m

PERFORMaNCES

Diameter 11 mm


Nb of falls factor 1 > 20


Static elongation 4 %


Weight 75 g/m

PERFORMaNCES

Diameter 10 mm



Impact force factor 0,3 5 kN



Weight 64 g/m

PERFORMaNCES

Diameter 10,5 mm





Sheath percentage 44 %

Weight 65 g/m

White

Bud 10.5 mm Versatile low stretch rope with an optimal balance price/quality. Mostly used in moderate work situations.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTB105

White Black Red Khaki

proline 11 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsLengths: 50m, 100m, 200mMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP11

White Black

proline 10 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP10

White Black Red Khaki

proline 10.5 mm everdryRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP105

6PROMaX UNICORE

White

promax 11 mmRopes from the PROMAX line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP11U

PERFORMaNCES

Diameter 11 mm






Weight 75 g/m

White

promax 10.5 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengths can be supplied on order Material: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP105U

PERFORMaNCES

Diameter 10,5 mm






Weight 65 g/m

White

promax 11.5 mmThe PROMAX rope offers a high breaking strength and its UNICORE treatment increases safety features in eliminating sheath slippage, even if the sheath is cut. Evacuation is then still possible.Lengths: 50m, 100m, 200mMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP115U

PERFORMaNCES

Diameter 11,5 mm






Weight 88 g/m

7SPECIaL ROPES

White Yellow Red

temp 11 mmThe Temp rope is concived for hostile environment, such as high temperature or chemical hasard situation. Its aramide core wistands short periods at 300C temperature; if the polyamide melts, the aramide core still holds 800 daN. At 500 C, the rope is completely destroyed.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: Polyamid/AramidNorm: CE EN 1891 - UIAAType: ACode: CSTPA

PERFORMaNCES

Diameter 11 mm






Weight 79 g/m

White

offshore 11 mmOffshore 11 mm speaks for itself. Developed in cooperation with workers from the oil industry / off shore, this rope gives you great handling and maximum durability.Lengths: 50m, 100m, 200m. Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTOF11

PERFORMaNCES

Diameter 11 mm




Static elongation (50/150kg) 4 %


Weight 75 g/m

Green

PERFORMaNCES

Diameter 10,5 mm






Weight 75 g/m

duotech 10.5 mmA perfect rope for any circumstances which has been certified to both standards EN892 and EN1891, both the semi-static and the dynamic rope standards. Lengths: 50m, 100m, 200mMaterial Sheath / Core: Polyamid/Polyamid - VectranNorm: CE EN 1891/892 - UIAAType: A (EN 1891) q (EN 892)Code: CSD105

duotech THE ROPE WITH TWO FACESThe DUOTECH is thus a classic semi static rope well adapted to various types of work on ropes, to rescue, and to tactical applications. In event of a very violent fall an internal vectran fuse will rupture, and the rope then becomes dynamic, with all the security that characterizes dynamic ropes. The fuse will rupture under a force of around 3 kN. In addition, duotech resists a fall factor 1 drop holding 100 kg over a sharp metal edge of 0.75 mm radius. Ideal for delicate operations at height, pylon climbing, clock towers, rescue and fast technical intervention.

8DyNaMIC ROPES

Yellow Violet

extrem 9 mmTop durability double rope for intensive usage. Ideal for instructors using the double rope protection system.Lengths: 50m, 60m, 200m Other lengths can be supplied on order.Material: PolyamidNorm: CE EN 892 - UIAA Type: Code: CA09

PERFORMaNCES

Diameter 9 mm


Nb of falls factor 1,77 12

Elongation at the first fall 33 %


Sheath slippage 0 mm

Weight 54 g/m

Violet Red

extrem 11 mmDesigned for the Military, Instructors, Outdoor schools and activities where extra durability and strength is required. It also appeals to other users who demand these attributes.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: PolyamidType: CE EN 892 - UIAA Code:

PERFORMaNCES

Diameter 11 mm






Weight 80 g/m

Green

axis ii 10.2 mmIdeal rope to begin climbing outdoors with a perfect balance between diameter and handling characteristics.Lengths: 50m, 60m, 70m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: C3R102

PERFORMaNCES

Diameter 10,2 mm






Weight 66 g/m

9aRbORISTS

Red

prusik 12 mm volcanoShort lengths of rope with sewn terminations for constructing self-locking (prusik) loops. These ropes have a 50 % aramid construction intermixed with polyester filaments. Prusiks made from classic ropes have a very short life, because they glaze in use due to the effect of friction. The presence of 50% of highly thermally resistant aramid fibres in Volcano protect it against melting and thus greatly increases its lifetime. Available in 10 and 12 mm, according to the knot to be used.

Material CORE / SHEATH: Polyamid Polyester / AramidNorm: CE EN 354

PERFORMaNCES

Diameter 10/12 mm


Red

Quercus 13 mm The QUERCUS rope is a very good compromise between supleness and resistance for any tree surgeon work.Material: PolyamidNorm: CE EN 1891Type: ACode: CSTP13

PERFORMaNCES

Diameter 13 mm






Weight 99 g/m

White

PERFORMaNCES

Diameter 10 mm


Weight 73 g/m

Yellow

seQuoia 13.5 mm The SEQUOIA tree surgeon rope is made of a typical american type tree surgeon rope sheath giving an outstanding longevity to the rope.Material: Polyester/PolyamidNorm: CE EN 1891 Type: ACode: CSTP135

PERFORMaNCES

Diameter 13,5 mm






Weight 119 g/m

adline prusik 10 mmADLINE 10 mm is our special prussik rope for our tree surgeon ropes. The double braid polyester construction gives an excellent abrasion resistance.Material: polyesterCode: CSTA10.xx

10

STaNDaRD NORMS

ppe en eQuipment standardsAll products manufactured for sale in the EU as Personal Protective Equipment must comply to one or more relevent product standards. These are all EN pr prEN specifications, and a compliant product should be marked with the EN number, the CE code logotype and the details of the approvals agency. Below is a list of all equipment specifications relating to height safety PPE.

Work equipment standards: ppe against falls from a heightindustrial height safety equipment generally has a standard in this section, and more are being added over time. If an industrial standard exists, then products used AT WORK must comply to it.

Standard Relates to: en341 Descender devicesen353-1 Guided type fall arresters type 1 : rigid anchorage line (rail systems such

as the Railok)en353-2 Guided type fall arresters type 2 : flexible anchorage line (wire and rope-

based systems such as Latchways, Rockers, ASAP)en354 Lanyardsen355 Shock absorbers (both discrete devices and components of other systems)en358 Work positioning systems (polestraps, etc)en360 Retractable fall arresters (blocks and reels)en361 Full body fall arrest harnesses

Standard Relates to: en362 Connectors (carabiners, scaffold hooks, etc)en363 Fall arrest systems (tested as a complete system)en364 Test methods - the standard for how to test products for compliance, used

by manufacturers.en365 General requirements for instructions for use, maintenance, periodic

examination, repair, marking and packaging - the standard defining what labels and instructions must be used on a product, and what the user is responsible for in terms of maintenance and examination.

en813 Sit harnesses (industrial abseil harnesses)en1891 Low stretch kernmantel rope (semi-static rope)

mountaineering and climbing equipment standardsmany products do not yet have an industrial standard, but there is a sport mountaineering version. These mostly come from UIAA specifications, and are no less stringent. If a product does NOT have an industrial standard, then a mountaineering compliance makes it suitable for use at work. If a product has both, the industrial standard must be used. The best example of this is connectors - a snap-lock carabiner will comply to EN12275 but fail EN362 (which needs a locking mechanism), and so it cannot be used at work.

Standard Relates to: en564 Accessory cord, safety requirements and test methodsen565 Tape, safety requirements and test methodsen566 Slings, safety requirements and test methodsen567 Rope clamps, safety requirements and test methodsen568 Ice anchors, safety requirements and test methodsen569 Pitons, safety requirements and test methodsen892 Dynamic mountaineering rope, safety requirements and test methodsen893 Crampons, safety requirements and test methodsen958 Energy absorbing systems for via ferrata (klettersteig) climbing, safety

requirements and test methods

standard Relates to: en959 Rock anchors, safety requirements and test methodsen12270 Chocks, safety requirements and test methodsen12275 Connectors, safety requirements and test methodsen12276 Frictional anchors, safety requirements and test methodsen12277 Harnesses, safety requirements and test methodsen12278 Pulleys, safety requirements and test methodsen12492 Climbers safety helmets, safety requirements and test methodsen13089 Ice tools, safety requirements and test methods

General standards relating to ppe and ropes standards for equipment that may be used outside height safety, such as fibre ropes and site helmets.

Standard Relates to: en397 Industrial safety helmets (site hats)en696 Polyamide fibre ropes (laid and braided - not kernmantel)en701 General service fibre ropes (natural fibre and other polymers not covered by EN696)en795 Anchor devices - requirements and testing (industrial and climbing anchors for any purpose)en45014 General criteria for Certificates of Conformity (instructions for manufacturers)

Rescue lifting and climbing standardsSpecialist standards for rescue equipment. These can only be used for rescuing a casualty in an emergency situa-tion, and are not acceptable for normal work use unless they also comply to the relevent industrial standards, so a harness that complies to EN1497 but not to EN361 cannot be used for industrial fall arrest.

standard Relates to: en1496 Rescue lifting devices (hauling and winching devices)en1497 Rescue harnesses (rescue nappies and emergency escape harnesses)en1498 Rescue loops (casualty lifting strops)

11

RESCUE

Yellow

elite rescue 10.6 mmType A low-stretch rope made of a polyester-polyamid composite sheath, with Everdry treatment. The rope has a high resistance to abrasion whilst remaining supple in use. Compared to a standard polyamid sheath, the shrinkage is reduced by a factor of 3.Material sheath / core: Polyamid-Polyester/PolyamidLengths: 50m, 100m, 200m Other lengths can be supplied on orderNorm: CE EN 1891 - UIAAType: ACode: CSTER106

PERFORMaNCES

Diameter 10,6 mm






Weight 71 g/m

Black

rescue 12 mmThe RESCUE 12 mm rope is developped for rescue interventions. It remains easy to knot even with a large diameter.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTN12

PERFORMaNCES

Diameter 12 mm






Weight 88 g/m

White Orange Black

rescue 13 mmLow stretch rope for search and rescue activity.Lengths: 50m, 100m, 200mOther lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CST13

PERFORMaNCES

Diameter 13 mm






Weight 107 g/m

Yellow

canyon 10 mmType A low-stretch rope made of a polyester-polyamid composite sheath, with Everdry treatment. The rope has a high resistance to abrasion whilst remaining supple in use. Due to its low shrinkage this rope is extremely suitable for use with waterrescue.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial sheath / core: Polyamid-Polyester/PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTC10

PERFORMaNCES

Diameter 10 mm




Static elongation (50/150kg) 4,5 %


Weight 68 g/m

12

INTERvENTION - MILITaRy - POLICE

Black Khaki

proline 10 mmVersatile low stretch rope with an optimal balance price/quality. Mostly used in moderate work situations.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: EN 1891 - UIAAType: ACode: CSTPN10

PERFORMaNCES

Diameter 10 mm






Weight 64 g/m

Black Khaki

proline 10,5 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengts can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTPN105

PERFORMaNCES

Diameter 10,5 mm






Weight 65 g/m

Black Khaki

proline 11 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsLengths: 50m, 100m, 200mMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTPN11

PERFORMaNCES

Diameter 11 mm






Weight 75 g/m

Black

special action 11 mmType B semi-static ropes specially developed for rapid descent from helicopters by special forces. Their Aramid sheath does not melt, even against a descender overheated by the descent. Whereas classic ropes in polyamide or polyester have a very limited lifetime because their sheath melts, rendering the rope stiff and useless, Raider ropes permit multiple descents. Lengths: 50m, 100m, 200mMaterial sheath / core: Aramid / PolyamidNorm: CE EN 1891 - UIAAType: BCode: CSTSPAK11

PERFORMaNCES

Diameter 11 mm






Weight 81 g/m

13

INTERvENTION - MILITaRy - POLICE

Black

action 11 mmThe thickness of the Aramid sheath on the Action has been reduced, and the quantity of core increased, in order to be able to certify it as type A.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial sheath / core: Aramid / PolyamidNorm: CE EN 1891Type: ACode: CSTAK11

PERFORMaNCES

Diameter 11 mm






Weight 75 g/m

Black

axis ii 10.2 mmIdeal rope to begin climbing outdoors with a perfect balance between diameter and handling characteristics.Lengths: 50m, 60m, 70m, 200mMaterial: PolyamidNorm: CE EN 892 - UIAAType: Code: C3R102

PERFORMaNCES

Diameter 10,2 mm






Weight 66 g/m

Black Khaki

extrem 9 mmTop durability double rope for intensive usage. Ideal for instructors using the double rope protection system.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 892 - UIAAType: Code: CA09

PERFORMaNCES

Diameter 9 mm






Weight 54 g/m

TEST WITH bLOWTORCH Semi-static rope holding a mass of 100kg exposed to a temperature of 400 C (+ or- 50 C) for 15 minutes : Results: Classic 11 mm rope : Break after around 40 sec. Special Action 11 mm rope : Residual strength around 1500 daN after 15 minutes.

Action 11 mm rope : residual strength around 1000 daN after 15 minutes.

image Flickr: SNappa2006

STATIC ROPES

code

name

standards

type

breakin

g stre

ngth (k

n)

breakin

g stre

ngth

with figu

re of

8 knot (k

n)

streng

ht with

sewn

term

ination (

kn)

nb of

falls ff

1

impact force

facto

r 0,3 (kn)

static elo

ngation (

%)

sheat slip

page (%

)

sheat p

ercentage (

%)

weight

shrin

k in w

ater (%

)

material

treatme

nt

optio

ns

CSTB105.xx BUD 10,5mm CE EN 1891 - UIAA Type A 10,5 24 17 12 5,6 3,1 0,2 36,4 67 g/m 5 Polyamid

CSTP10.xx PROLINE 10mm CE EN 1891 - UIAA Type A 10 23 17 6 5 2,2 0 41,2 64 g/m 3 Polyamid

CSTP105.xx PROLINE 10,5mm CE EN 1891 - UIAA Type A 10,5 26 19 22 15 4,6 4,8 0,3 44 65 g/m 3,5 Polyamid Unicore / Stitched Eye

CSTP11.xx PROLINE 11mm CE EN 1891 - UIAA Type A 11 30 19 24 > 20 4,35 4 0,93 43,7 75 g/m 3 Polyamid Unicore / Stitched Eye

CSTP115.xx PROMAX 11,5mm CE EN 1891 - UIAA Type A 11,5 40 23 24 > 20 5,1 3,7 0 32 88 g/m 3,3 Polyamid Unicore

SpeCIAl ROPESCSTPA.xx TEMP 11mm CE EN 1891 - UIAA Type A 11 25 19 15 5,6 3,1 0 42 79 g/m 3,3 Polyamid / Aramid TEMP

CSD105 Duotech 10,5mm CE EN 1891/892 Type A (EN1891Simple (EN 892) 10,5 25 16,5 24 4,3 (50/150kg) 2 0,8 43 75g/m 0Sheath: Polyamid Core: Polyamid/

Vectran

CSTOF11 Offshore 11mm CE EN 1891 - UIAA Type A 11 30 19 > 20 5,1 (50/150kg) 4 0,9 44 75 g/m 3 Polyamid Unicore / Stitched Eye

Arbo ROPESCSTA10.xx ADLINE 10mm - Prussik 10 17 73 g/m Polyester

CSTP13.xx QUERCUS 13mm CE EN 1891 Type A 13 34 19 24 > 20 5,3 4,2 0 61 99 g/m 4,5 Polyamid Stitched Eye

CSTP135.xx SEQUOIA 13,5mm CE EN 1891 Type A 13,5 30 18 22 > 20 5,1 5 0,5 82 119 g/m 2 Polyester and Polyamid Stitched Eye

SpeCIAl TACTICAl ROPESCSTAK11 Action 11mm CE EN 1891 Type A 11 24 18 6 5,9 (50/150kg) 3,2 0 30 75 g/m 0,5

Sheath: Aramid Core: polyamid

CSTSPAK11 Special Action 11mm CE EN 1891 Type B 11 26 19 8 4,7 (50/150kg) 3,3 0,6 41 81 g/m 0,5Sheath: Aramid Core: polyamid

SpeCIAl reSCue ROPES

CSTER106 Elite rescue 10,6mm CE EN 1891 - UIAA Type A 10,6 25 18 15 5,2 (50/150kg) 4 0 37 71g/m 1,5Sheath: Polyamid/

Polyester Core: Polyamid

Everdry

CSTN12.xx RESCUE 12mm CE EN 1891 - UIAA Type A 12 35 > 20 5 4,3 0,6 36,8 88 g/m 3,5 Polyamid

CST13.xx RESCUE 13mm CE EN 1891 - UIAA Type A 13 44 24 > 20 5,4 2,9 0,2 37 107 g/m 0,35 Polyamid

CAnyon & WATer reSCue ROPES

CSTC10.xxx Canyon 10mm CE EN 1891 - UIAA Type A 10 23 17 6 5 (50/150kg) 4,5 0 35 68g/m 1,3Sheath: Polyamid/

Polyester Core: Polyamid

Everdry

DynAmIC ROPES

code

name

standards

type

impact force

ff 1,77 (k

n)

nb of

falls

ff 1,77

elong

ation a

t first

fall (

%)

static elo

ngation (

%)

sheat slip

page (%

)

weight

material

treatme

nt

techno

logy

C3R102 Corde AXIS II 10,2 mm CE EN 892 - UIAA 1 10,2 8,3 11 36 9,3 0 66 g/m polyamide Everdry Perform3 HD Cover

CA09 Corde EXTREM 9 mm CE EN 892 - UIAA 9 6,25 12 32 9 0 54 g/m polyamide Superever-dry (opt.)Perform3

Sharp Edge Resistant

CA11 Corde EXTREM 11 mm CE EN 892 - UIAA q 11 9 14 32 7,6 0 80 g/m polyamide Superever-dry (opt.)Perform3

Sharp Edge Resistant

14

ROPE SPECS

15

aCCESSORy ROPES

aramid cord 5,5 mmAccessory cord with Aramid core combining high tensile strength with light weightMaterial: Aramid / PoluamidDiameter: 5,5 mmBreaking strength: 18 kNWeight: 23 g/m

cord prusik 7 mmMulti purpose Polyamide accessory cord, with great abrasion resistance thanks to a specific braiding. Its dynamic core gives an extra absorbant capacity in the safety chain.Material: PoluamidDiameter: 7 mmBreaking strength: 9,8 kNWeight: 31,9 g/mNorm: CE EN 564 - UIAA

CODE DIaMETER LENgTH WEIgHT bREaKINg STRENgTH NORM

C01.200 Cord 1mm 1mm x 200m 0,65 g/m 0,35 kN


C03.60 Cord 3mm 3mm x 60m 6 g/m 1,8 kN

C04.60 Cord 4mm 4mm x 60m 10,4 g/m 3,2 kN EN354 UIAA

C05.60 Cord 5mm 5mm x 60m 18,7 g/m 5 kN EN354 UIAA



C08.60 Cord 8mm 8mm x 60m 47 g/m 12,8 kN EN354 UIAA


DIaMETER WEIgHT bREaKINg STRENgTH NORM

Cord 5,5mm aramide 23 g/m 18 kN

Cord prussik 7mm 33,49 g/m 9,8 kN EN564 UIAA

Adline 10mm 73 g/m 17 kN

Prusik 10mm volcano 22 g/m EN354 UIAA

Prusik 12mm volcano 22 g/m EN354 UIAA

packed lenGTh coRdCODE DIaMETER LENgTH WEIgHT bREaKINg STRENgTH NORM




C05.5 Cord 5mm 5mm x 5m 18,7 g/m 5 kN EN354 UIAA



cordsMulti purpose Polyamide accessory cords, with great abrasion resistance thanks to a specific braiding. Available on roll or packet lengths

dyneema 10mmLight weight sewn slings made of flat 10mm Dyneema / Polyamide tapeBreaking strength: 22 kNNorm: EN795B, EN354, EN566 - UIAA

LENgTH WEIgHT CODE30 cm 11 g SAD10.30

60cm 20 g SAD10.60

120cm 38 g SAD10.120

180cm 56 g SAD10.180

240cm 73,5 g SAD10.240

flat sling 18mmLight weight sewn slings made of flat 18mm Polyamide tapeBreaking strength: 22 kNNorm: EN795B, EN354, EN566 - UIAA

LENgTH WEIgHT CODE30 cm 26 g SA18.30

60cm 48 g SA18.60

120cm 92 g SA18.120

180cm 137 g SA18.180

240cm 181 g SA18.240

16

SLINgS

sewn sling 16 mmTubular webbing with high resistanceWidth: 16 mmBreaking strength: 22 kNMaterial: PolyamideLengths : 30, 60, 120, 180, 240cmDifferent lengths = different coloursNorm: EN566, EN795B, EN354

sewn sling 19 mmTubular webbing with high resistanceWidth: 19 mmBreaking strength: 22 kNMaterial: PolyamideLengths: 30, 60, 120, 180, 240cmDifferent lengths = different coloursNorm: EN566, EN795B, EN354

sewn sling 26 mmTubular webbing with high resistanceWidth: 26 mmBreaking strength: 22 kNMaterial: PolyamideLengths: 60 and 120cmDifferent lengths = different coloursNorm: EN566, EN795B, EN354

eye ring 19 mmTubular webbing with high resistanceThe red inner material guarantees you an indication when the outer has been worn out also this sling has a high strength 30 kN.Width: 19 mmBreaking strength: 30 kNMaterial: PolyamideLengths : 60, 80, 120, 150cmDifferent lengths = different eye coloursNorm: EN795B, EN354

Our offer of slings gives you a choice for every profession and favorite use. Thanks to our experiences, we decided to certify if possible for all 3 EN standards EN566, EN795B and EN354. 16mm, 19 mm and 26 mm Tubular open slings are completed with an offer of a 18 mm flat webbing sling. In additional we created a lightweight sling that holds up to 30kN with a reinforced eye, eye-ring called. A perfect sling to have with you under any circumstances, available in 60, 80, 120, 150 cms

17

TRaX & abSORb

CODE TyPE LENgTH

LDI.060 Trax 60 60 cm

LDI.080 Trax 80 80 cm

LDI.120 Trax 120 120 cm

LDI.150 Trax 150 150 cm

en 795b

LDI.200 Trax 200 200 cm

LDI.350 Trax 350 350 cm

LDL.05 Swift 5 5 m

LDL.10 Swift 10 10 m

LDV.065 Trax V 30/65

LDV.085 Trax V 30/85

LDV.100 Trax V 100/100

LDV.150 Trax V 150/150 aBsorB ShOCk ABSORBERShock absorber. Very small, flexible and compact fall absorber. The Absorb in combination with Trax cr eates an unique fall absorption system.Weight: 150gBasic lenght: 0,18mMax. Length after the fall (fall factor 2): 1,4mImpact force: 5,5kN

trax DyNAMIC LANyARDTrax Dynamic lanyard and anchor device for working at height.The dynamic lanyard fulfills for the lengths of 60, 80, 120 and 150 cms the EN standards 795B and 354. Where for the lengths 200 and 350 cms, 5 and 10 meters only are certified EN795B.Both ends of the dynamic lanyard are with stitched eye, and the stitching has a plastic cover.These lanyards improve your safety.This product is NOT a fall absorber.

Trax dynamic lanyard combined with Absorber

TyPE CODE

ABSORB (EN355) ShABS

Lanyard ABSORB 120cm ShAB-I120

Lanyard ABSORB 120cm + C23 connector ShAB-I120_C23










Double lanyard V ABSORB 100cm ShAB-V100

Double lanyard V ABSORB 100cm + C23 connector ShAB-V100_C23


Double lanyard V ABSORB 150cm ShAB-V150




LENgTH CONNECTORS

C23 C60 C110

60 cm

80 cm x

120 cm x x

150 cm x x

200 cm x

350 cm x

500 cm x

1000 cm x x x

Window at the cover for checking of fall absorber

18

CaRabINERS

lock LIghT ALLOyEyelet connector with triple action opening for maximum security in sportive and professional activities. Catch free closure.Type: D / TLength: 140 mmWidth: 79 mmEyelet: 22 mmWeight: 102 gMajor axis strength: 25 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode : MLOK

Jet LIghT ALLOyScrew gate carabiner, catch free closure and light weight ergonomic body.Type: HLength: 107 mmWidth: 66 mmWeight: 65 gMajor axis strength: 28 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MJET

Top d LIghT ALLOyLight weight carabiner with ergonomic shape. Catch free closure, straight gate, ideal for draws on anchor point side.Type: BLength: 96 mmWidth: 59 mmWeight: 44 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MTOPD

link LIghT ALLOyScrew gate carabiner, catch free closure and lightweight ergonomic body.Type: HLength: 105 mmWidth: 66 mmWeight: 66 gMajor axis strength: 28 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 - UIAACode: MLINK

peRfoRmance LIghT ALLOyEyelet connector with triple action opening for maximum security in sportive and professional activities. Catch free closure.Type: K / TLength: 138 mmWidth: 70 mmEyelet D: 24 mmWeight: 134 gMajor axis strength: 28 kNMinor axis strength: 10 kNOpen strength: 10 kNNorm: CE EN 12275 / 362 - UIAACode: MPERFORMANCE

sonic LIghT ALLOyVery light weight carabiner with thin body. Ideal for draws on the rope side. The wire gate avoids opening by inertia.Type: BLength: 95 mmWidth: 60 mmWeight: 38 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MSONIC

Top c LIghT ALLOyLight weight carabiner with ergonomic shape. Catch free closure, straight gate, ideal for draws on anchor point side.Type: BLength: 96 mmWidth: 59 mmWeight: 44 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MTOPC

19

CaRabINERS

GuaRd LIghT ALLOyScrew gate hMS carabiner with catch free closure.Type: H / BLength: 120 mmWidth: 76 mmWeight: 86 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode : MGUARD

GuaRd o LIghT ALLOyScrew gate oval carabinerwith catch free closure.Type: X / BLength: 110 mmWidth: 61 mmWeight: 74 gMajor axis strength: 21 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode : MGARDO

Z102 STEELSteel carabiner twist gateType: BLength: 107 mmWidth: 57 mmWeight: 197 gMajor axis strength: 30 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: EN 362Code: MZ102

Z500 STEELSteel carabiner twist gateType: BLength: 110 mmWidth: 68 mmWeight: 251 gMajor axis strength: 52 kNMinor axis strength: 16 kNOpen strength: 18 kNNorm: EN 362Code: MZ500

GuaRd 3 LIghT ALLOyTriple action opening hMS carabiner with catch free closure.Type: H / BLength: 120 mmWidth: 76 mmWeight: 100 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode: MGUARD3

Z103 STEELSteel carabiner triple action gateType: BLength: 107 mmWidth: 57 mmWeight: 198 gMajor axis strength: 30 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: EN 362Code: MZ103

Z503 STEELSteel carabiner triple action gateType: BLength: 110 mmWidth: 68 mmWeight: 251 gMajor axis strength: 52 kNMinor axis strength: 16 kNOpen strength: 18 kNNorm: EN 362Code: MZ503

Z101 STEELSteel carabiner screw gateType: BLength: 107 mmWidth: 57 mmWeight: 179 gMajor axis strength: 30 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: EN 362Code: MZ101

20

CONNECTORS & bELay DEvICES

d8 LIghT ALLOyFigure of eight belay device with ears allowing a locking key. Height: 108 mmWidth: 80 mmWeight: 92 gBreaking strength: 25 kN Code: MD8

guru alpin LIghT ALLOyBelay device for single or double ropes diameter 7,9 to 11mm with additional notch on one side to create additionnal braking friction and carabiner holes for easy belaying in multipitch routes. Height: 114 mmWidth: 43 mm Weight: 99 g Code: MGURUALP

Quick link STEELOval 8mm diameter quick link with screw gate. Type: QLength: 76 mmWidth: 25 mm: 8 mmWeight: 76 gBreaking Strength: 25 kNNorm: CE EN 12275 - UIAACode: MRAPID8

c60 LIghT ALLOyDouble gate automatic connector with wide 60 mm opening for scaffolding and other metallic structure.Length: 236 mmWidth: 114 mmEyelet: 22 mmBreaking strength: 22 kNWeight: 475 gNorm: EN 12278 - UIAACode: MC60

s8 LIghT ALLOyVersatile medium size figure of eight belay device. Height: 132 mmWidth: 74 mmWeight: 102 gBreaking strength: 25 kNCode: MS8

guru + LIghT ALLOyBelay device for single or double ropes with additional notch on one side to create additionnal braking friction. Height: 114 mmWidth: 55 mm Weight: 93 g Code: MGURU+

c23 STEELDouble gate automatic connector with 18 mm opening.Length: 136 mmWidth: 60 mmEyelet: 22 mmBreaking strength: 22 kNWeight: 230 gNorm: CE EN 362Code: MC23

c110 LIghT ALLOyDouble gate automatic connector with wide 110 mm opening for scaffolding and other metallic structureLength: 358 mmWidth: 165 mmEyelet: 27 mmBreaking strength: 25 kNWeight: 920 gNorm: EN 12278 - UIAACode: MC110

image: oloF Fredrikze

21

PULLEyS

pulley 213 r LIghT ALLOyDouble pulley with water proof ball bearings. Can be used on rope up to maximum 13 mm diameter and metal cable with max. 12 mm diameter.Breaking strenght: 25 kNWeight: 291 grNorm: CE EN 12278Code: MP213R

swivel LIghT ALLOySwivel avoids twisting in a lanyard or rope system.Length: 115mmWidth: 55mmBreaking strength: 30kNWeight: 162 gNorm: CE EN 354 - UIAACode: MSW

trafic 116 LIghT ALLOyLightweight Pulley to be used with rope max diameter 16 mm - can be used with Prusik friction cord. Maximum breaking strength: 30 kN. Weight: 246 gr. Norm: EN 12278Code: MP116

trafic 111 LIghT ALLOyLightweight Pulley to be used with rope max diameter 16 mm - can be used with Prusik friction cord. Maximum breaking strength: 20 kN.Weight: 121 gr. Norm: EN 12278Code: MP111

trafic 216 LIghT ALLOyLightweight Pulley with bottom attachment point, to be used with rope max diameter 16 mm can be used with Prusik friction cord. Maximum breaking strength: 30 kN. Weight: 423 gr. Norm: EN 12278Code: MP216

rotor 113 r LIghT ALLOyPulley with ballbearing to be used up to rope 13mm diameter. Small, lightweight mainly used for hauling systems.NORM: EN 12278 - UIAACode: MP113R

22

INDUSTRIaL TECHNOLOgy

Padded and ergonomic shoulder straps to reduce chafing.

Special loops for your extra equipment.

HerCuleS EVO SIT

Narrow padding of shoulders.

Upper front attachment point EN361.

The lower front attachment point EN 813 distributes the weight more evenly between the waistbelt and the leg loops. Excellent movement is granted.

Lateral point EN 358 at GO position.Extra-protected point even for additional connector or PPE gear. Increases comfort during abseiling.

Slim strap with well done made padding. As yours experiences requires.

Elastic straps for your free movement.

Lateral point EN 358 at LOCK position.

New modern padding, designed for all professionals. Allows grate movement and support.

23

HaRNESSES

hercules action sitMade from highly resistant materialsPadding is reinforced with polyethylene plateRevolving side attachment points 180 according to EN 358Formed and braided gear loopsSupporting lots for your equipment with a guarantee capacity of 10kgAdditional loop for your equipment with a guarantee capacity of 5kgStreak reflex at waist beltTextile loop for EN 813 attachment point is extra protected4 x speed bucklesEasily to combine with Hercules shouldersIn the design of the Hercules Action safe Cobra buckles are used to quickly open and close the harness in any situation where this is needed. This gives a guarantee to adjust it quickly to your body.Norm: EN 813, EN 358 CE 0120S: Height: 155-175cm Waist: 70-90cm Legs: 55-65cmM-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cmXL: Height: 180-210cm Waist: 90-130cm Legs: 60-75cmCode: HER.AK.SIT

hercules evo sitMade from highly resistant materialsPadding is reinforced with polyethylene plateRevolving side attachment points 180 according to EN 358Formed and braided gear loopsSupporting lots for your equipment with a guarantee capacity of 10kgAdditional loop for your equipment with a guarantee capacity of 5kgStreak reflex at waist beltTextile loop for EN 813 attachment point is extra protected4 x light bucklesEasily to combine with Hercules shouldersNorm: EN 813, EN 358 CE 0120S: Height: 155-175cm Waist: 70-90cm Legs: 55-65cmM-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cmXL: Height: 180-210cm Waist: 90-130cm Legs: 60-75cmCode: HEREVO.SIT

24

HaRNESSES

hercules evo shoulderMade from highly resistant materialsAnatomic shoulders perfectly fit to usersFront and back attachment points EN 361 made from steelLoop for connector (eliminating risk of bypass) All very stressed places are extra protectedEasily to combine with Hercules Evo sit and Hercules action sitNorm: EN 361 together with sit harness CE 0120S: Height: 155-175cmM-L: Height: 170-185cmXL: Height: 180-210cmCode: HEREVO.SHO

hercules evo full BodyCombination of sit and shouldersNorm: EN 813, EN 358, EN 361 CE 0120S : Height: 155-175cm Waist: 70-90cm Legs: 55-65cmM-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cmXL : Height: 180-210cm Waist: 90-130cm Legs: 60-75cmCode: HEREVO.FUL

delta rescueRescue harness and sling.Big textile attachment points.Back attachment point.Norm: EN 1497, EN 1498 CE 0120Size: uni

25

HaRNESSES

vulcainFront attachment point EN 361.Easy to wear.Different colours of leg straps and shoulders.Safe, light and quick buckle.Holds body at the proper position.Unlimited freedom of movement.Norm: EN 361 CE 0120Sizes: UniWeight: 780gCode: HVUL

vulcain JackIncluding functional jackFront attachment point EN 361Easy to wearDifferent colours of leg straps and shouldersSafe, light and quick buckleHolds body at the proper positionUnlimited freedom of movementNorm: EN 361 CE 0120Sizes: UniCode: HVUL.J

2/3

1/3

0

3/3

EN 361=2/3EN 813

26

HaRNESSES

explorer iiRope Course adventure parks Harness the front attachment point is a metal ring, avoiding this way that users will click in a wrong way. Totally USER FRIENDLY, this point can be used as EN361 but also be moved to position of EN813. Easy to put on and off as for each leg loop there is a different color of webbing used. The harness gives an unlimited freedom of movement during activities.Explorer comes in 2 sizes, one for smaller people and a bigger version for taller users.2 gear loops.Front fulfilling to EN813, Front attachment point can also placed that it functions as EN361Material: Polyamid / PolyesterNorm: CE EN 12277- UIAA / CE EN 361-813Type: CCode: HEXP.II

challenge hg Hg: Adjustable unpadded harness with three auto lockingbuckles and two sliding gear loops. A single visible attachment point, closing of the waist on the right side, for easy checking by the instructor in rope courses. Ideal for via ferrata and activity centres.Material: PolyamidNorm: CE EN 12277 - UIAAType: CCode: HCCCode: HCC.XL

challenge Bgbg: Completely adjustable chest harness with compact construction. Developed for use with our Challenge sit harness. Raises safety margin in falls. Can be used with any sit harness.Material: PolyamidNorm: CE EN 12277 - UIAAType: CCode: HCT

27

ROPE gEaR & PROMO gEaR

work Trescue T

Black CAP edelweiss TUMBLER

100% cotton, comfort fit and climbing spirit ! Tee shirt available in assorted colours and designs.Material: Cotton 190 g /m2Sizes: XS > XLCode Work T: T.09Code Rescue T: T.08

Logo embroidered Cap / one size fits allCode: P.CAP13

Whatever activity you are doing a cup hot coffee or chocolate is always welcome . For this purpose we are able to supply you with the Edelweiss Tumbler, 280 ml standard red Edelweiss color.Code: PGOB.1

rope CLEANER

thermo CUTTER

rope BRUSH

Our own development for cleaning ropes after action. The brush adapts easy to different rope diameters. Fix the brush on the rope, then slide the brush along the rope while holding the rope under water.Code: D.ROBRUSH

A none-aggressive detergent developed for easy cleaning of polyamide products / ropes or harnesses. However the water temperature used should be less than 30 Celcius.Code: D.ROCLEAN

This Thermocutter features an electrically heated blade designed for cutting all ropes easily and effortlessly. heats up instantly.

perfect GLOVE

Leather glove with palmreinforcement for via ferrataand other vertical activities.Sizes: S-M-LMaterial: 70% cowhide leather, 15% cow suede leather and 15% nylon stretch fabricCode: GL01

Edelweiss Professional2, boulevard Pierre Joannon42400 SAINT-CHAMOND - FRANCETl +33 (0)4 77 29 22 80 - Fax +33 (0)4 77 31 81 [email protected]

www.edelweiss-ropes.comThe data given in this catalogue are guidelines for assessing the quality of our products. More detailed specifications currently applicable are available on request. We reserve the right to make changes called for by technical development as well as changes in colour. Printed- and typesetting errors reserved.

EDELWEISS EVERDRY, PERDUR are trademarks for which the EDELWEISS S.A. has registered rights in one or several countries of the world.

Edelweiss PRO 2013

Documents

Transcript of Edelweiss PRO 2013