Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated...

90
M-PACT Air Circuit Breakers 400 - 4000A Air Circuit Breakers GE Power Controls New Ed. 02

Transcript of Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated...

Page 1: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Ref

. I/

3135

/E/E

X 1

2.0

Ed.

04/

2002

Cop

yrig

ht G

E P

ower

Con

trol

s 20

02

6808

09

We bring good things to life.

GE Power Controlsin EuropeGE Power Controls

21

03

4

M-P

AC

T

Air Circuit Breakers 400 - 4000AAir Circuit Breakers

GE Power Controls

New

GE POWER CONTROLSExport DepartmentGuldensporenpark 30B-9820 Merelbeke (Gent)Belgium

Tel. +32/9 210 38 11Fax +32/9 210 39 20E-mail: [email protected]

GE POWER CONTROLS Ltd.Hornhouse Lane,Knowsley Business ParkLiverpool L33 7YQUnited Kingdom

Tel. 0151/524 1122Fax 0151/524 6247E-mail: [email protected]

GE Power ControlsNow on the net !

www.gepowercontrols.com

GE Power Controls is the European arm of GE Industrial Systems, one of the ten core businesses of the General Electric Company (USA), known internationally for its positive approach to its customers, its people and the world we all live in.

GE Power Controls is a top class European supplier of low-voltage productsincluding wiring devices, residential and industrial electrical distribution components, general purpose control products, enclosures and switchboards.Most of the global demand for the company's products comes from OEMs,wholesalers, installers and panel-board builders worldwide.

So, these are the facts, now the story behind them. GE Power Controls'name is synonymous with technical expertise, quality of products and services, and the broadness of its range. But this is not enough, in a constantly changing and competitive environment we have to offer all thisand more. Over the next few years our product range will be dramaticallyexpanded and renewed .

The goal we have set for quality ensures no less than constant progress, as part of GE's company-wide Six Sigma product and service excellence initiative. This applies not only to our products and services but also to ourbusiness conduct, where only the highest standards are good enough. We believe that our most important asset is the trust our customers put inus. We earn it by our continuing quest for improvement on every front andour strong commitment to integrity and reliability.

Ed

. 02

Page 2: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

M-P

AC

T

Page 3: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Air circuit breakers 400A-4000A

Technical overview

Order codes

Wiring diagramsDimensional drawings

Numerical index

A

B

C

X

Fixed Circuit BreakerWithdrawable Circuit BreakerCharacteristicsM-PRO Microprocessor Protection RelaysM-PRO Trip CurvesM-PACT Accessories

A.4A.5A.6A.8

A.14A.22

A.1

Page 4: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

GE Power ControlsA.2

Notes

Page 5: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.3

A

M-PA

CT

Rated from 400 to 4000A the M-PACT circuitbreaker has been designed to meet the moststringent demands in fault detection and safeinterruption thereof.Available in 2 frame sizes: - frame size 1 ranging from 400 to 2500A- frame size 2 ranging from 800 to 4000A

The range has been developed to be aestheticallyand technically co-ordinated with other protectivedevices within the GE Power Controls industrialproduct ranges.

The breaker range has a common height and depthand is available in both fixed pattern and drawoutversions which can be manually or electricallyoperated. Designed to offer multiple mainsconnection options it also comes with a wide rangeof easy-to-install accessories.

Specification

M-PACT air circuit breakers comply with thefollowing specifications for Low Voltage Switchgear:• IEC 947-1• IEC 947-2• IEC 947-3• BS EN 60947-2• VDE 0660 Part 101 and Part 107• Utilisation category B

Approvals

ASTA / KEMA & LOVAG certification in accordancewith IEC 947-2/ BS EN 60947-2.

3 performance ranges*S – 50 kA (Icu)N – 65 kA (Icu)H – 80 kA (Icu)*Ratings shown at 500V AC2 compact frame sizesFrame size 1 - 400 to 2500AFrame size 2 - 800 to 4000A

Fixed pattern and withdrawable versions3 or 4 pole configurationFront and rear access connections (horizontal / vertical)Devices provided with or without protection relayManual or electrical operationCommon height and depth dimensionsBuilt-in safety features e.g. safety shuttersWide range of protection settings offering full selectivityCombinations of earth fault protectionEasy-to-install accessories, common to entire rangeSimple and efficient servicing on site

Frame 1 Frame 2

Page 6: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Fixed circuit breaker

All M-PACT fixed pattern air circuit breakersincorporate a stored energy mechanism. The springcan be charged either manually or electrically via amotor operator that is automatically activated afterthe closing operation.IP43 front panel and door escutcheon seals arestandard features with IP20 protected secondaryisolating contacts. For enhanced protection, anoptional IP54 door panel is also available.

• Trip-free operating mechanism • Positive ’ON/OFF’ contact indication• Mechanical/electrical anti-pumping device• Charging spring status indication (optional)• Ergonomic manual spring charging handle• Field-mountable range of accessories• Auxiliary switches 5 NO and 3 NC, 10A 250V

(standard)• Mechanical Trip Alarm switch (1NO) (optional)• Padlockable push-button cover• Mechanical cable interlocking (optional)• Termination: rear, horizontal or front access

(optional)• Electrical clearances according to IEC 947-2• Front access of secondary terminals for simple

connection

Installation

Fixed pattern M-PACT can be fastened into any sui-table switchboard or cubicle arrangement using fourM8 bolts. Clearance is only required above the unit for theremoval and inspection of the arc chutes (seedimensional drawings for mounting details andrecommended clearance distances).An earthing point is provided on either side of thecircuit breaker.

Power Supply

All stated short circuit ratings are certified withincoming supply connection made to either upper orlower terminals.

1. Motorised spring charging unit (optional)2. M-PRO Protection Relay (optional) 3. Secondary contacts4. Shunt trip (optional)5. Closing coil (optional)6. Undervoltage release (optional)7. Manual charging handle8. ON/OFF push-buttons*9. Push-button padlockable covers*10. Positive contact indication11. Charging spring status indication12. Mounting plate

A.4

Tech

nica

l ov

ervi

ew

A

GE Power Controls

12 1

11

10

7

2

3 4 5 6

8

9

arrange new photographswith Alex

Page 7: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Withdrawable circuit breaker

Pre-mounted into a self-contained ’cassette’, thisversatile circuit breaker can be inserted orwithdrawn via sliding rails using a racking drivemechanism controlled by a racking handle.It provides three set positions: Disconnected / Test / Connected.Any attempt to withdraw the unit whilst in servicewill automatically trip the breaker, either by the rac-king position safety mechanism or by the insertionof the racking handle. It can be racked to the dis-connected position with the cubicle door closed oropen.

• Insulated shutters to isolate the main contactzone

• Front access padlocking for safety shutters• Secure padlocking in the "Disconnect" position• Clearly visible operational position indication• Carriage position switch (optional)• Termination: Flat copper palms (standard) with

captive M10 fixing nuts• ’T’ terminal adaptors for horizontal/vertical

connection (optional)• Front access connections (optional)• Automatic disconnect of secondary circuits• Lifting lugs for ease of removing the circuit

breaker from the cassette• Front access of secondary terminals for simple

connection• Cassette side mounting fixing parts (optional)

Installation

Circuit breakers are delivered pre-mounted in thecassette (standard)Versatile fixing arrangements allow mounting ontoany switchboard or cubicle using four M8 bolts (see dimensional drawings for mounting details andrecommended clearance distances)Earthing point situated on the right hand side ofcassette (front view)

A.5

A

M-PA

CT

Power Supply

All stated short circuit ratings are certified withincoming supply connection made to either upper orlower terminals.

1. Carriage position switch (optional)*2. Extension rail*3. Earthed steel safety shutter*4. Secondary terminals5. 2 way cable interlock mechanism (optional)6. Racking handle (storage)7. Padlocking for safety shutters8. Insertion hole for racking handle9. Padlocking in the DISCONNECTED position10. Operational position indication11. Key interlock (optional)** Features not visible in picture

10 9 8 7 6

5

4

Page 8: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Free Air(1)

The M-PACT ACBs may operate at higher ambienttemperatures than 40°C in certain installationconditions. In this case the current rating inAmperes should be reduced as indicated below.

A.6

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Design and specifications are subject to changes without notice.

CharacteristicRated current (40°C)

Rated service voltage (50/60 Hz)Rated insulation voltage (50/60 Hz)Rated impulse withstand voltage

Rated ultimate short-circuitbreaking capacity

Rated service short-circuitbreaking capacity

Rated short time withstand current1 second3 secondsRated short-circuit making capacity

Power dissipation at In (Fixed breaker)Power dissipation at In (Withdrawable)

SymbolIn

UeUi

Uimp

Icu

Ics

IcwIcwIcm

UnitsA

VVV

kA (rms)

kA (rms)

kA (rms)kA (rms)kA (peak)

WattsWatts

220V415V500V600V690V

220V415V500V600V690V

415V500V600V690V

S1

5050505040

5050505040

5040143143143841633

N1

6565655040

6565655040

6550143143105841122

S1

5050505040

5050505040

5040143143143843975

N1

6565655040

6565655040

6550143143105842753

S1

5050505040

5050505040

50401431431438463127

N1

6565655040

6565655040

6550143143105844386

H2

8080806560

8080806560

80501761761431052349

S1

5050505040

5050505040

504014314310584106211

N1

6565655040

6565655040

65501431431058468135

H2

8080806560

8080806560

80501761761431053677

2000010000500069010008000

3 & 4100%

2000010000500069010008000

3 & 4100%

2000010000500069010008000

3 & 4100%

2000010000500069010008000

3 & 4100%

Endurance (number of operating cycles)Mechanical (with maintenance)

Mechanical (without maintenance)Electrical (at rated current)

Number of polesRating of 4th pole

ACB typeFrame size

Temperature Deratings

The figures specified apply to withdrawable ACB’s with flat face vertical copperconnections (1) Protection degree IP00. For use in enclosures with interior temperatures of40°C to 70°C the relevant IP values can be applied.

Ambienttemperature

50°C60°C65°C70°C

800800800800800

10001000100010001000

12501250125012501250

16001600144513641280

20002000200020001970

25002450223220921970

32003200320030192831

40003727336731752978

Characteristics

Current Rating (A)

Performance Data

400 630 800 1000

Selectivity

Down-stream

Up

-str

ea

m

4008001000125016002000250032004000

400-

FullFullFullFullFullFullFullFull

800---

FullFullFullFullFullFull

1000----

FullFullFullFullFull

1250-----

FullFullFullFull

1600------

FullFullFull

2000-------

FullFull

2500--------

Full

3200---------

4000---------

The following table shows the conditions to satisfyfull selectivity between UP-STREAM and DOWN-STREAM devices.Up-stream: M-PACTDown-stream: M-PACTST delay 50 ms minimum between up-stream anddown-stream ACB Multiplication coefficient betweenLT-ratings ≥ 1,56

Up-stream: M-PACTDown-stream: RECORD or SPECTRA*ST delay 50 ms minimum on M-PACTMultiplication coefficient between LT ratings* Record and Spectra are GE Power ControlsMoulded Case Circuit Breakers.

Down-streamSpectraRecord

All ratings≤250A

250A≤500A500A≤1250A

LT coefficient222,53

Page 9: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

In accordance with IEC 947-2

In accordance with IEC 947-2 at 415V

A.7

A

M-PA

CT

Dimensions in mm

Recommended Minimum Copper Size

Rating(A)

400 to 2500

800 to 3200

4000

Type

WithdrawableFixed

WithdrawableFixed

WithdrawableFixed

WithdrawableFixed

WithdrawableFixed

WithdrawableFixed

FrameSize

1

2

2

Poles

3

4

3

4

3

4

Height(1)

440430440430440430440430440430440430

Width

329322429422419412549542419412549542

Depth(2)

390328390328390328390328482328482328

Rating (A)

4006308001000125016002000250032004000

Copper / phase

2 x 50 x 52 x 50 x 52 x 50 x 52 x 60 x 52 x 100 x 52 x 100 x 53 x 100 x 54 x 100 x 54 x 100 x 10

4 x 100 x 10 + 1 x 100 x 5

(1) Height is from mounting surface to highest part of the ACB(2) Depth is from the cubicle door to the back terminals

S1

5050505040

5050505040

504014314310584175351

N1

6565655040

6565655040

655014314310584105211

H2

8080806560

8080806560

805017617614310560128

S1

5050505040

5050505040

504014314314384287574

N1

6565655040

6565655040

655014314310584196392

H2

8080806560

8080806560

805017617614310598209

S1

5050505040

5050505040

504014314314384224490

N1

6565655040

6565655040

655014314310584224490

H2

8080806560

8080806560

8050176176143105163347

S1

5050505040

5050505040

504014314314384351765

N1

6565655040

6565655040

655014314310584351765

H2

8080806560

8080806560

8050176176143105255542

S2

5050505040

5050505040

504014314314384418888

N2

6565655040

6565655040

655014314310584418888

H2

8080806560

8080806560

8050176176143105418888

S2

5050505040

5050505040

5040143143143845711224

N2

6565655040

6565655040

6550143143105845711224

H2

8080806560

8080806560

80501761761431055711224

1250

2000010000500069010008000

3 & 4100%

1600

2000010000500069010008000

3 & 4100%

2000

2000010000500069010008000

3 & 4100%

2500

2000010000500069010008000

3 & 4100%

3200

2000010000500069010008000

3 & 4100%

4000

2000010000500069010008000

3 & 4100%

BreakerRange

S

N

H

Rating(A)

400 to 1600

400 to 4000

800 to 4000

Type

Fixed orWithdrawable

Fixed orWithdrawable

Fixed orWithdrawable

Icu

50kA

65kA

80kA

Ics

50kA

65kA

80kA

Icw (1 sec.)

50kA

65kA

80kA

Rated Short-Circuit Capacity Weights (kg)

Fixed pattern ACB400 to 1600A2000 & 2500A800 to 3200A

4000A

Withdrawable ACB400 to 1600A2000 & 2500A800 to 3200A

4000A

Cassette only400 to 1600A2000 & 2500A800 to 3200A

4000A

Frame1122

Frame1122

Frame1122

3 Pole36435353

3 Pole637290111

3 Pole27293758

4 Pole44546868

4 Pole7790117144

4 Pole33364976

3 Pole39435353

3 Pole687290111

3 Pole29293758

4 Pole49546868

4 Pole8490117144

4 Pole36364976

3 Pole--

5353

3 Pole--

90111

3 Pole--

3758

4 Pole--

6868

4 Pole--

117144

4 Pole--

4976

S range N range H range

1250 1600 2000 2500 3200 4000

Page 10: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

M-PRO MicroprocessorProtection Relays

M-PRO17, M-PRO20, M-PRO30 and M-PRO40 arethe dedicated protection and management units forthe M-PACT air circuit breakers and have beendeveloped to meet the most stringent demands ofmodern circuit protection. Designed with the full benefit of advancedmicroprocessor technology, the M-PRO protectionand management units offer a comprehensive menuof overload, short circuit and earth fault protectionto satisfy the most enhanced client requirements.

The protection and management systemincorporates the following components:• Electronic protection relay• Power current transformers• Measuring system (Rogowski coil)

The components are separately mounted into theM-PACT air circuit breaker. Current transformerspower the electronic protection relay and themeasured signal is generated by the Rogowski coilson the main phases. The M-PRO circuitry sensesTRUE RMS current with immunity to systemdisturbances. On request, the M-PRO protectionrelay can be permanently powered by an auxiliarypower unit. When the circuit breaker is closed thecurrent transformers ensure energising power forthe protection unit.

A.8

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Page 11: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Depending on the selected type the M-PROprotection relays offer the following features:• Overload protection• Short circuit protection• Earth fault protection • I2t cropping • Neutral protection• Thermal memory• Communication• Trip history and indication• Manual or automatic reset• Watch dog in case of microprocessor malfunction• Plant Associated Memory Module (PAMM)• Outputs• Programmable inputs• Load monitoring, Pre-trip alarm/Load shedding

Long time protectionM-PRO17: Curve speed fixed to class 20 (480 sec at1.5 Ir, 20 sec at 7.2 Ir ) in accordance with IEC 947-4.1M-PRO20-40: Curve speed adjustable and meetsthe requirements of IEC 947-4.1 (class 40).Choice between the curve characteristics inaccordance with IEC 255:• Standard inverse• Very inverse• Extremely inverse general/motor (default)• HV fuse compatible for transformer-fed circuits

involving discrimination with primary side highvoltage fuses

The operating time of each type can vary in 16increments, from curve speed 1 (shortest time) tocurve speed 16 (longest time).

Short time protectionMaximum operating time is 80ms from initiation ofthe fault to contacts part. Operating time of the I2tcropping on M-PRO20-40 is fixed at 0.1 times theselected long time characteristic.

A.9

A

M-PA

CT

Making Current Release (MCR)Instantaneously trips the M-PACT air circuit breakershould an attempt be made to close onto a short-circuit fault current greater than the detectedmaking capacity of 50kA. This trip becomesinoperative once the circuit breaker has beenclosed.

High Set Instantaneous Short Circuit (HSISC)Provides immediate protection against high valueshort circuit currents by tripping the circuit breaker.HSISC pickup level is factory set depending on M-PACT air circuit breaker performance.

Earth Fault ProtectionThree types of earth fault protection are available:• Unrestricted (UEF) - protects downstream cables

and equipment• Restricted (REF) - protects upstream cables and

equipment forming the main supply to the breaker• Standby (SEF) - provides general back-up

protection against earth faults affecting upstreamor downstream cables and equipment

M-PRO17: Unrestricted protection only

M-PRO30-40: Any combinations of two or threetypes of protection can be factory pre-set

Earth fault curve cropping: available for unrestrictedor stand-by earth fault options. This feature enablesthe user to vary the tripping time in accordance withthe prospective earth fault detected.A ‘Cropping Factor’ may be selected which is amultiple of the chosen earth fault pick-up current.This selects the desired level of current at which thefixed time delay becomes effective.

Earth fault protection zone diagram

Page 12: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Neutral pole protectionM-PRO17: Factory-set to 50% or 100%M-PRO20-40: Customer selectable between ‘OFF’,50% and 100%.

Thermal memoryTo protect against unacceptable recurring or cyclicoverloads the M-PRO will track and memorise thethermal effects of load current while the breaker ison line. Tripping will be initiated when thecumulative thermal effect of cyclic overloadingreaches a predetermined level.M-PRO20: Adjustable time constants (auxiliarypower supply mandatory)M-PRO30-40: Adjustable time constants (auxiliarypower supply included)

Trip alarm switchM-PRO17-40: this 1NO switch is operated by theprotection management unit trip mechanism whenthe M-PRO has initiated a trip. Tripping is indicateduntil the reset button on the M-PRO is pressed. In

case of automatic reset an impulse will be generated

RESET FunctionM-PRO17: manual reset function onlyMPRO20-40: manual or auto reset function

Plant Associated Memory Module M-PRO20–40 includes a plant associated memorymodule (PAMM), fitted remote from the protectionunit that stores the M-PRO settings. This featurereduces set-up time by down loading the originaldata if the M-PRO is replaced or the moving portionof the ACB is changed. The new unit will not requirere-configuration while ensuring error-freereplacement and maintenance.

Adjustment method of settingM-PRO17: Front panel rotary switchesM-PRO20-40: Front panel keypad, LCD display

InputsM-PRO30 & 40 are provided with four opto-coupledremote inputs to initiate alarm signals or tripping ofthe circuit breaker in response to signals indicatinga change in the state of devices remotely positionedin the system. The supply voltage of the remote inputs are 24/48VDC (MPRO 30L or MPRO 40L) and 110/250V AC or

110/130V DC (MPRO 30H or MPRO 40H).

OutputsM-PRO30 & 40 are provided with four relay outputsto permit remote indication of changes in the stateof the circuit breaker and its protection, e.g. M-PROinitiated trip / watchdog alarm / breaker maincontact maintenance alarm / remote fault / pre-tripalarm/load monitoring.

This facility may also be used to transmit a remotetrip signal to a High Voltage circuit breaker.

An external power supply is required to permitremote output facilities.

Load MonitoringM-PRO30–40 offers two alternative facilities ofmonitoring the load, pre-alarm or load shedding.Pre-trip alarm: This alarm will provide a warningwhen the current measured is above 1.1x Ir and thethermal content is above 60% thus indicating that atrip is likely to occur.Load shedding: Load shedding will have two userconfigurable current levels, the level which sheddingwill start, and the level at which shedding will stop(auxiliary power supply mandatory).

CommunicationM-PRO40: By means of a RS485 4-wire serial linkusing a MODBUS protocol, M-PRO protection unitscan be linked for remote communication to providea complete system management and control.Communication occurs in both directions.Remote switching – each unit can be remotelyopened and closedRemote adjustment – user settings and inputs maybe altered by remote commandMonitoring – ammeters, load monitoring,operations counter, existing faults, trip history

A.10

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Page 13: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.11

A

M-PA

CT

M-PRO

Long Time Protection

• Pickup adjustable from 0.4 to 1.0x In in steps of 0.1

• Pickup adjustable from 0.4 to 1.0x In in steps of 0.01

Long Time Characteristic

• To IEC 947-4 Class 40 (& IEC 255, 80 combinations)

• To IEC 947-4, Class 20

Short Time Protection

• 2, 3, 4, 6, 8 ,10 ,12x Ir

• 1.5, 2, 3, 4, 6, 8 ,10 ,12x Ir

Short Time Delay

• Instantaneous, 0.1, 0.2, 0.4, 0.6, 0.8, 1.0s.

• Instantaneous to 1.0s in 0.1 steps

Short Time I2t Cropping

• 0.1 times selected long time

• Pick-up, 1.5, 2, 3, 4, 6, 8, 10 and 12 x Ir

Neutral Protection

Earth fault protection

• Unrestricted (UEF)

• Restricted (REF)

• Standby (SEF)

• Earth fault pickup, OFF, 0.4 to 1.0x In. 0.2 In steps

• Earth fault pickup, OFF, 0.1 to 1.0x In. 0.01 In steps

• Time delay, Instantaneous to 1.0 sec. 0.1 steps

• Earth fault cropping, 1 (OFF), 1.5, 2, 2.5, 3, 4, 5 and 6

Thermal Memory

• Fixed to at time constant of 20 minutes

• Adjustable time constants, inst., 10, 20, 30, 45, 60, 120, 180 minutes

Trip Indication

• Healthy Unit LED

• Warning / Alarm LED

• Discrete LED’s for each fault type

• Fault codes (via Communications unit)

Output Relays

• Load Monitoring

• Trip Initiated

• HV Inter trip (linked to REF)

• Remote ACB switching (Open / Close via Comms. Unit)

Communications MODBUS protocol

Trip Reset

• Manual (push button)

• Automatic

Other Optional Features

• Trip Alarm Contacts (mechanical C/O)

• Watchdog / Watchdog disable

• Auxiliary Power Unit

• Ammeter

• Operations counter

• Trip History (previous 16 trips)

• Main Contact Maintenance Indication

Inputs (Programmable)

• 24 - 48V DC

• 110-130V DC or 110-250V AC

PAMM (Plant Associated Memory Module)

• Small connector

• Large connector

Test Connector

• 15 way D-type

• 16 way DIL heater

❍(1)

❍(1)

●(5)

●(5)

L

❍(2)

❍(3)

❍(2)

❍(4)

H

❍(2)

❍(3)

❍(2)

❍(4)

L

H

(1) Only UEF or Neutral protection option (not both)(2) Standard feature when communications option is specified(3) Standard feature when Restricted Earth Fault option is specified(4) Feature not available if communications option is specified(5) Auxiliary power unit required

L = low voltage inputsH = higher voltage inputs

● Standard feature❍ Optional feature

17 20 30 40

M-PRO Microprocessor Protection Relays - Specifications

Page 14: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

M-PRO17 MicroprocessorProtection Relay

MPRO17 shown with UEF

1.Overload rotary setting switch2.Short circuit and time delay rotary setting switches3.Earth fault and time delay rotary setting switches4.Selectable manual reset button5.Overload and short circuit protection curve symbol6.Earth fault protection curve symbol7.Healthy LED8.Multi-pin socket for test box and/or portable

power box

M-PRO20-40 MicroprocessorProtection Relays

1.Overload/short circuit protection curveincorporating 7 red LEDs; indication of fault type

2.Earth fault protection curve incorporating 2 redLEDs for fault indication

3.LCD 2-line display for clear indication of menus,settings, recorded information

4.Warn/Alarm LED5.Healthy LED 6.Selectable Manual-/Automatic-reset button7.Four button tactile key pad8.Multi-pin socket for test box and/or portable

power box

A.12

Tech

nica

l ov

ervi

ew

A

GE Power Controls

32

4

8

1

5

6

7

3

4

5

6

8

7

2

1

Page 15: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Plug-in Portable Test Unit (PTU)

MPRO17 test box shown above

Specially designed for reliable testing of the MCRand HSISC protection systems on each phase, bymeans of tertiary injection. The test unit is also usedto prove both overcurrent and earth fault pick-up levels.Can also be employed to test for trip-ping in order to verify efficient microprocessor opera-tion. The test unit incorporates a set of rechargeablebatteries and includes a charger unit as standard.

Auxiliary Power Unit (APU)

Available to be fitted within the circuit breakercubicle, an APU ensures that M-PRO receivesindependent and continuous power at all times.The APU accepts any input supply voltage between24V and 264V DC or 95V and 265V AC.Maximum input current is 0.5 A.1m length cable (twisted pair) should be used toconnect auxiliary supply and MPRO protection relay.

A.13

A

M-PA

CT

Plug-in Portable Power Box (PPB)

Applicable for M-PRO20-40Adjustments to protection settings and curve selection can be achieved when the circuit breakeris open and there is no permanent auxiliary powersource available.Power is provided by 3 x 9V PP3 size nonrechargeable batteries.

Page 16: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.14

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Trip Curves

M-PRO 17

Current I (x Ir, the sensor rating)

Tim

e t

o t

rip

in

se

co

nd

s (s

)

Page 17: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.15

A

M-PA

CT

Trip Curves

M-PRO 17

Current I (x Ir, the sensor rating)

Tim

e t

o t

rip

in

se

co

nd

s (s

)

Page 18: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.16

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Earth Fault Protection Curves

M-PRO 17

Current I (x Ir, the sensor rating)

LT set at 1 x ACB rating (Ir)

Tim

e t

o t

rip

in

se

co

nd

s (s

)Waar komt deze tekst?

Page 19: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.17

A

M-PA

CT

Earth Fault Protection Curves

M-PRO 17

Current I (x Ir, the sensor rating)

Tim

e t

o t

rip

in

se

co

nd

s (s

)

Page 20: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.18

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Tim

e t

o t

rip

in

se

co

nd

s (s

)

Current I (x Ir, the sensor rating)

Trip Curves

M-PRO 20/30/40

LT set at 1 x ACB rating, InLTD set at 0.2 sST set at 1.5 IrSTD set at InstType S: Instantaneous release at 50kA

LT set at 1 x ACB rating, InLTD set at 30 sSC set at 6 x IrSCD = 3 sST set at 12 x IrSTD set at 1 sType H: Instantaneous release at 80kA

LTD has 16 available settings0.25...35 seconds at 7.2 x IrIndicated: 0.2 and 30 seconds

SC has 8 available settings1.5, 2, 3, 4, 6, 8, 10, 12 x IrIndicated: 6 x Ir

SCD is fixed at 10 x theconfigured LT curveIndicated: 3 seconds

Instantaneous release:Type S 50kAType N 65kAType H 80kAIndicated: S and H

ST has 8 available settings1.5, 2, 3, 4, 6, 8, 10, 12 x IrIndicated: 1.5 x Ir and 12 x Ir

STD adjustable:Inst to 1.0 s in 0.1 stepsIndicated: Inst and 1 s

Page 21: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Trip Curves

M-PRO 20/30/40

A.19

A

M-PA

CT

Tim

e t

o t

rip

in

se

co

nd

s (s

)

Current I (x Ir, the sensor rating)

LT set at 1 x ACB rating, InLTD set at 5 sST set at 1.5 IrSTD set at 300 msType S : Instantaneous release at 50kA

ST has 8 available settings1.5, 2, 3, 4, 6, 8, 10, 12 x IrIndicated: 1.5 x Ir and 12 x Ir

STD adjustable:Inst to 1.0 s in 0.1 stepsIndicated: Inst, 100 & 300 ms

LT set at 1 x ACB rating (In)LTD set at 35 sSC set at 6 x IrSCD = 3 sST set at 12 x IrSTD set at 300 msType H: Instantaneous release at 80kA

LTD has 16 available settings0,25...35 seconds at 7.2 x IrIndicated: 5 and 35 seconds

SC has 8 available settings1.5, 2, 3, 4, 6, 8, 10, 12 x IrIndicated: 6 x Ir

SCD is fixed at 10 x theconfigured LT curveIndicated: 3.5 seconds

Instantaneous release:Type S 50kAType N 65kAType H 80kAIndicated: S and H

LT set at 1 x ACB rating, InLTD set at 5 sST set at 1.5 IrSTD set at INSTType S: Instantaneous release at 50kA

Page 22: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Earth Fault Protection CurvesM-PRO 30/40

A.20

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Tim

e t

o t

rip

in

se

co

nd

s (s

)

Current I (x In)

Earth fault cropping CTrip Time = Time delay x C x If/IAdjustment = 1, 1.5, 2, 2.5, 3, 4, 5 & 6Note: 1 = OFFIndicated: C = 1.5 and 6

Earth fault pick up IfAdjustment = 0.1 to 1.0 x Inin 0.01 x In steps

Time delay has 11 settingsInst. to 1 s in steps of 0.1 sIndicated: Inst., 0.1 s and 1 s

Pickup If set at 0.1 x InTime delay set at inst.

Pickup If set at 0.1 x InTime delay set at 0.1 s

Pickup If set at 1 x InCropping set at 6Time delay set at 1 s

Page 23: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Earth Fault Protection CurvesM-PRO 30/40(tolerance bands shown)

A.21

A

M-PA

CT

Tim

e t

o t

rip

in

se

co

nd

s (s

)

Current I (x In)

Earth fault cropping Ctrip Time = Time delay x C x I f/IAdjustment = 1, 1.5, 2, 2.5, 3, 4, 5 & 6Note: 1 = OFFIndicated: C = 1.5 and 6

Earth fault pick up IfAdjustment = 0.1 to 1.0 x Inin 0.01 x In steps

Time delay has 11 settingsInst. to 1 s in steps of 0.1 sIndicated: Inst., 0.1 s and 1 s

Pickup If set at 0.1 x InTime delay set at inst.

Pickup If set at 0.1 x InTime delay set at 0.1 s

Pickup If set at 1 x InCropping set at 6Time delay set at 1 s

Page 24: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.22

Tech

nica

l ov

ervi

ew

A

GE Power Controls

M-PACT Accessories

A wide range of optional accessories have beendeveloped that are compatible with all M-PACT aircircuit breakers, regardless of nominal rating orframe size. Each one incorporates ‘easy-fit’ designfeatures for quick installation, either in the factory orby the user on site.

Motorised spring charging unit

The unique motor/gearbox unit is specially designedto operate with the full range of M-PACT breakers. It is easily fitted with just two bolts.In the event of circuit breaker closure, this unit willautomatically recharge the spring in readiness forinstant reclosure should the need arise.High speed recharging ensures that the springs arefully charged within approximately three secondsfollowing a release.As an optional feature, a “springs charged” contactis available for the motor unit.

Circuit breaker closing coil

The closing coil is an easy-to-fit, clip-on unit, withsimple plug-in connectors. This permits either localor remote release of the spring charged closingmechanism by electrical operation.An additional anti-pumping safety feature also ensuresthat the electrical closing signal must be released

before further closure is attempted, and a cut-off isinstigated should a closing signal be maintained.Because each coil operates within a wide voltagerange, the number of individually rated coilsrequired is drastically reduced.

Shunt trip

Energisation, locally or remote, will instantaneouslyactivate the circuit breaker mechanism, ensuringrapid disconnection of the main contacts.In addition, a series connected auxiliary switchensures automatic isolation whenever the circuitbreaker is open. Shunt trip releases also have a wide operationalvoltage range, and they include the same easy-fit,clip-on/plug-in connectors as the closing coil above.

Undervoltage release

Instantaneously releases the circuit breaker tripmechanism should the supply voltage dip below thepre-set value. Simple to install, these devices havethe same easy-fit features as previously described.Note: This is a ‘no-volt/no-close device. Thecircuit breaker cannot be closed (manually orelectrically) unless the undervoltage release coilis energised.

Time delay undervoltage releaseSimilar to the above, but this electronic device preventsnuisance tripping of the circuit breaker if circuitinterruption is not desirable when supply voltagedrop is only transient. Fixed time delay 3 sec ±1sec.

Auxiliary trip combination

The M-PACT circuit breaker can be equipped withthe following auxiliary trips or releases1 x Shunt trip + 1 x Closing coil + 1 x Undervoltage release or 1 time delayUndervoltage release

Page 25: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.23

A

M-PA

CT

Auxiliary switches

The M-PACT circuit breaker is equipped with 5 NOand 3 NC auxiliary switches as standard.Maximum number of contacts is 8, for alternativeconfigurations please contact for availability.

Mechanical operation counter

Easily fitted, this useful accessory may be specifiedfor use with either manual or motor charged M-PACT circuit breakers. It is clearly visible throughthe front panel, and the counter provides anaccurate record of the cumulative number ofcomplete breaker closing operations.

Key interlock facility

Castell key interlock version shown above

Ready-to-fit interlocking devices such as Castell,Ronis, Profalux and Fortress, for installation betweenseparate circuit breakers, available in kit form. This valuable safeguard ensures that a circuitbreaker cannot be closed unless the dedicated keyhas been inserted and secured within the lock.Note: Lock and key are not supplied by GEPower Controls. Please order separately fromyour local supplier.

Lock and key typesCastell: Type FS1 lock with key type FK4 key, 45°clockwise rotation to trap the key, 7/8"x3/8" squarespindle.Ronis: Type 1104B lock with standard key, 1/4" turnrotation to trap the key, compulsory spindle size.Profalux: Type B20D4Y lock with key type S1(without cam), 1/4" turn rotation to trap the key,compulsory spindle size.Fortress: Type H31/LH lock with flip cap andstandard key, 45° clockwise rotation to trap the key,7/8"x3/8" square spindle.

Cassette main terminal adaptors

Type ‘N’, 65kA, rear connection shown above

Combinations of rear and front access connectionspossible for entire range. Tested and approved from50 to 80kA.

Type ‘N’, 1600A, 65kA, front access connection shown above

To simplify main busbar or cable termination, M-Pact provides a full range for rear and/or frontaccess connection.Bolt-on adaptor kits can be fitted easily to suiteither horizontal or vertical connections.

Page 26: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Cable/busbar earthing device

All ‘M-PACT’ circuit breakers can be fitted with anearthing device. It has a short circuit fault capacityequal to the Icw rating of the breaker. This permitseither the feeder cables or the busbar to be safetyheld at earthed potential and locked during systemmaintenance operations.

Carriage position switch

Available as an optional device for mounting withinthe base of the cassette, this switch provides sixsingle pole changeover contacts for local or remoteelectrical indication of the circuit breaker status:Connected, Test and DisconnectedThe Disconnected position is indicated only whenminimum isolating distances between contacts onboth the main and auxiliary circuits have beenachieved.This option is in addition to the mechanicalindicators which are fitted as standard.When installed, the carriage switch is IP2Xprotected and includes wiring to a terminal blocklocated on the left-hand side of the cassette.

Note: The carriage position switch is an optiononly suitable for withdrawable circuit breakers.

A.24

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Cluster contacts

These are the main isolating contacts which arefitted to the rear terminals on the moving portion ofthe withdrawable unit.As part of standard inspection and maintenanceprocedures, cluster contacts have been designed tobe easily and quickly removed and replaced usinguniversal cluster pliers.

2/3 way cable / rod mechanicalinterlocks

Cable interlocking version shown above

Available for fixed and withdrawable circuit breakersthese units enable the direct interlocking of M-PACT circuit breakers, either mounted side-by-side or stacked. The interlocking mechanisms areconnected by a specially designed cable or rod or 3 in a ‘1 from 3’ OR ‘2 from 3’ configuration, andany mix of current ratings / pole configurations canbe accommodated.Standard cable lengths available: 1.0, 1.6, 2.0, 2.5,3.0, 3.5 and 4.0 metres. (Please contact our technical customer servicedepartment if longer length is required.)

Page 27: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.25

A

M-PA

CT

InterlocksMechanical interlocks can be fitted to the following electrical systems and can link 2 and/or 3 circuit breakers.Any nominal rating, frame size, number of poles or type (fixed pattern or withdrawable) can be interlocked.

Typical circuit

Type C2 from 3 way interlock6 cable configurationInterlocking between 3 circuit breakers.

2 bus sections can be powered by asingle transformer (bus coupler closed)or by both transformers (bus coupleropen).

Available upon request.

Type D1 from 3 way interlock variant4 cable configuration (2 cables for buscoupler)Interlocking between 3 circuit breakers.

2 normal power supplies not set inparallel1 power supply may assist the prioritycircuit

Available upon request.

Type E2 from 3 way 'specific' interlock4 cable configurationInterlocking between 3 circuit breakers.

2 normal power supply can be set inparallel1 generator (emergency) supply

Available upon request.

Type B1 from 3 way interlock6 cable configurationInterlocking between 3 circuit breakers.

3 power supplies (generator or trans-formers) feeding the same busbar butparallel operation is prevented.

Available upon request.

Type A1 from 2 way interlock2 cable configurationInterlocking between 2 circuit breakers.

1 normal power supply1 generator (emergency) supply

Interlock configuration

Circuit breaker B1 can only close if B2is open

Circuit breaker B2 can only close if B1is open

Only 1 from 3 breakers can be closed

Any 2 from 3 breakers can be closedAny 1 from 3 breakers can be closed2 breakers must be closed to prevent the 3rd breaker from closing

Circuit breaker B1 and/or B3 can beclosed only if B2 is open

Circuit breaker B2 can only be closedif B1 & B2 are both open

Circuit breakers B1 and/or B2 can beclosed only if B3 is open

Circuit breaker B3 can only be closedif B1 & B2 are both open

Possible combinations

B10I0

B200I

B10I00

B200I0

B3000I

B10I00I0I

B2000III0

B300I00II

B10I0I0

B20000I

B300II0

B10I0I0

B200II0

B30000I

Page 28: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

the unit should it be outside its cassette. Installers willalso find it particularly valuable for top-tier mountedcircuit breakers. Note: Users who already possess a‘Titan’ handling truck for the original M-PACT cir-cuit breaker can now obtain a conversion kit.

Automatic Transfer Switches(A.T.S.)The ATS ensures the continuity of electric supply toan installation with minimum interruption by makingan automatic transfer from the normal supply to emer-gency source. The emergency source can be either atransformer or generator supply and the M-PACT aircircuit breakers are governed automatically by thetransfer controller, which selects the available source.

Circuit breaker insertion interlock

By incorporating this optional security interlockdevice into a system, it prevents the inadvertentinsertion of an incorrectly rated withdrawable circuitbreaker into a cassette.

Cassette interlock

Available for withdrawable circuit breakers only, thissophisticated interlock system secures the circuit brea-ker in the disconnected position by means of a Ronis orProfalux key. When the key is removed, the safety shut-ters are automatically locked in position, thus preven-ting access to the contacts and also ensuring that theracking mechanism is not operable. For lock and keydetails refer to key interlock facility section (p. A.23)

Sealeddoor panelescutcheonAn optional IP54complete front doorpanel is availableshould a higherdegree of protectionbe necessary.

Circuit breaker handling truckSpecifically designed for use with the M-PACT range,this dedicated handling truck is a useful accessorywhen faced with the task of inserting or removing thecircuit breaker from its panel, or when transporting

A.26

Tech

nica

l ov

ervi

ew

A

GE Power Controls

Page 29: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A.27

A

M-PA

CT

Device

Auxiliary & carriage switch

Motor operator

Closing coil

Shunt trip

Instantanious Undervoltage release

Auxiliary power unit

AC

250

220 - 250110 - 127

220 - 250110 - 130

220 - 250110 - 130

380 - 440220 - 250110 - 13095 - 265

DC

125250

220 - 250110 - 12742 - 4824 - 36

220 - 250110 - 13040 - 4824 - 30

220 - 250110 - 13040 - 4824 - 30

110 - 13042 - 4824 - 3024 - 264

Operating range

---

0.85 to 1.1 timesrated voltage

0.85 to 1.1 timesrated voltage

0.70 to 1.1 timesrated voltage

----

Power consumption (Watts max.)

---

350

410

410

400

12

Rating (Amps resistive)

105

0.25----------------

Accessories Performance DataOperating Voltage (V)

Page 30: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Ord

er c

odes

B

GE Power Controls

1. Device ❒ Type S (50kA) ❒ Type N (65kA) ❒ Type H (80kA)

2. Rating ❒ 400A ❒ 800A ❒ 1250A ❒ 2000A ❒ 3200A

❒ 630A ❒ 1000A ❒ 1600A ❒ 2500A ❒ 4000A

❒ Frame size 1 (400 to 2500A) ❒ Frame size 2 (800 to 4000A)

3. Number of poles ❒ 3-pole ❒ 4-pole Neutral Left ❒ 4-pole Neutral Right

4. System ❒ 3 phase 3 wire ❒ 3 phase 4 wire

5. Frequency ❒ 50 Hz ❒ 60 Hz

6.Type Top connection Bottom connection

❒ Fixed ❒ Front or ❒ Rear ❒ Front or ❒ Rear

❒ Withdrawable ❒ Front or ❒ Rear ❒ Front or ❒ Rear

❒ Moving portion only

❒ Cassette only ❒ Front or ❒ Rear ❒ Front or ❒ Rear

❒ Side Mounting Details

7. Protection ❒ non automatic ❒ M-PRO 17 ❒ M-PRO 30L ❒ M-PRO 40H

❒ M-PRO 20 ❒ M-PRO 30H ❒ M-PRO 40L

M-PRO Language ❒ English ❒ French ❒ Italian ❒ Dutch ❒ Spanish ❒ Portuguese ❒ German

8. Earth Fault options ❒ Unrestricted (UEF) ❒ Restricted (REF) ❒ Stand-by (SEF)

9. Neutral protection ❒ Not required ❒ 50% rated ❒ 100% rated

10. M-PRO options ❒ Ammeter ❒ Portable test unit

❒ Operations counter ❒ Portable power box

❒ Mechanical Trip alarm Switch (1n/o) ❒ Auxiliary power unit

❒ Communications ❒ No trip (alarm only) watchdog

❒ Main Contact Maintenance Alarm

11. Drive mechanism ❒ manually operated ❒ motor operated (MOP) ❒ springs charged contact

12. Releases ❒ Closing coil ❒ Shunt trip ❒ Undervoltage ❒ Undervoltage Time delayed

(CC) (ST) (UV) (UVTD)13. Control voltage MOP CC ST UV UVTD

24/30V DC ❒ ❒ ❒ ❒

48V DC ❒ ❒ ❒ ❒ ❒

110/130V DC ❒ ❒ ❒ ❒ ❒

110/130V AC ❒ ❒ ❒ ❒ ❒

220/250V DC ❒ ❒ ❒

220/250V AC ❒ ❒ ❒ ❒ ❒

380/440V AC ❒ ❒ ❒

14. Auxiliaries ❒ Carriage switch - Factory fitted ❒ Carriage switch - Loose kit

15. Interlocks ❒ Castell Key interlock ❒ Door interlock (left hand)

❒ Ronis Key interlock ❒ Door interlock (right hand)

❒ Profalux Key interlock ❒ Circuit breaker mis-insertion interlock

❒ Ronis Cassette Key interlock

❒ Profalux Cassette Key interlock

Cable Interlock ❒ 2 way ❒ 1 from 3 way ❒ 2 from 3 way

(Type A only) Type ❒ B ❒ D Type ❒ C ❒ E

Cable Length required (in centimeters)

❒ 100 ❒ 160 ❒ 200 ❒ 250 ❒ 300 ❒ 350 ❒ 400 ❒ Other (please specify below)

Rod Interlock ❒ 2 way ❒ 1 from 3 way ❒ 2 from 3 way

(Type A only) Type ❒ B ❒ D Type ❒ C ❒ E

Rod Length required (in centimeters)

❒ 100 ❒ 160 ❒ 200 ❒ 250 ❒ 300 ❒ 350 ❒ 400 ❒ Other (please specify below)

16. Miscellaneous ❒ Mechanical Operations Counter ❒ ACB Lifting truck

❒ IP54 door panel - withdrawable type ❒ Titan Truck adaptor kit

❒ IP54 door panel - fixed pattern

17. Operations Manual ❒ Please specify preferred language for text

18. Documents ❒ Certificate of Conformity ❒ Test Certification

19. Special requirements (PLEASE SPECIFY ANY IMPORTANT INSTRUCTIONS)

Specify on the order

B.0

Page 31: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Technical overview

Order codes

Wiring diagramsDimensional drawings

Numerical index

A

B

C

X

Specify on the order

Air Circuit Breaker - TYPE S - 50kA - Non-auto

Air Circuit Breaker - TYPE S - 50kA - Automatic

Air Circuit Breaker - TYPE N - 65kA - Non-auto

Air Circuit Breaker - TYPE N - 65kA - Automatic

Air Circuit Breaker - TYPE H - 80kA - Non-auto

Air Circuit Breaker - TYPE H - 80kA - Automatic

M-PRO Protection

M-PRO Electrical Accessories

M-PRO Mechanical Accessories

M-PRO Spare parts

B.0

B.2

B.4

B.6

B.8

B.10

B.12

B.14

B.15

B.16

B.17

B.1

Page 32: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Rear Connections

Rating (A)

400 to 1600

400 to 1600

2000 & 2500

800 to 3200

4000

Cat. No.

RT1HORRT1HORRT1VERRT1VERRT1UNIRT1UNIRT2UNIRT2UNI

N/AN/A

Ref. No.

403680403680403681403681405600405600405601405601

N/AN/A

Type

HorizontalHorizontal

VerticalVertical

UniversalUniversalUniversalUniversalVerticalVertical

Pack

68686868

StandardStandard

Cat. No.

RT1SVFIXRT1SVFIX

--

RT1SNVFIXRT1SNVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIX

Ref. No.

405603405603

405609405609405621405621405621405621

Type

VerticalVertical

VerticalVerticalVerticalVerticalVerticalVertical

Pack

68

686868

Poles

3434343434

Fixed PatternWithdrawable or CassettesFramesize

1

1

1

2

2

Air Circuit Breaker - TYPE S - 50kA - Non-auto

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliary switches. Withdrawable pattern – basic circuit breaker and cassette with flat copper terminalsrear connected.Fixed pattern – basic circuit breaker with rear terminals horizontal.

B.2

Ord

er c

odes

B

GE Power Controls

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MS31W04MS4L1W04MS4R1W04MS31W06MS4L1W06MS4R1W06MS31W08MS4L1W08MS4R1W08MS31W10MS4L1W10MS4R1W10MS31W12MS4L1W12MS4R1W12MS31W16MS4L1W16MS4R1W16MS31W20MS4L1W20MS4R1W20MS31W25MS4L1W25MS4R1W25MS32W20MS4L2W20MS4R2W20MS32W25MS4L2W25MS4R2W25MS32W32MS4L2W32MS4R2W32MS4L2W40MS32W40MS4R2W40

Ref. No.

405103405102405316405105405104405318405107405106405320405109405108405322405111405110405324405113405112405326405115405114405328405117405116405330405119405118405332405121405120405334405123405122405336405124405125405338

Cat. No.

MS31F04MS4L1F04MS4R1F04MS31F06MS4L1F06MS4R1F06MS31F08MS4L1F08MS4R1F08MS31F10MS4L1F10MS4R1F10MS31F12MS4L1F12MS4R1F12MS31F16MS4L1F16MS4R1F16MS31F20MS4L1F20MS4R1F20MS31F25MS4L1F25MS4R1F25MS32F20MS4L2F20MS4R2F20MS32F25MS4L2F25MS4R2F25MS32F32MS4L2F32MS4R2F32MS32F40MS4L2F40MS4R2F40

Ref. No.

405133405132405366405135405134405368405137405136405370405139405138405372405141405140405374405143405142405376405145405144405378405147405146405381405149405148405384405151405150405387405153405152405391405155405154405393

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31WS16TFA41WS16TFA31WS25TFA41WS25TFA32WS32TFA42WS32TFA32WS40TFA42WS40T

Ref. No.

405921405922405923405924405925405926405927405928

Cat. No.

FA31WS16BFA41WS16BFA31WS25BFA41WS25BFA32WS32BFA42WS32BFA32WS40BFA42WS40B

Ref. No.

406021406022406023406024406025406026406027406028

Withdrawable and Fixed PatternWithdrawable Fixed Pattern

WithdrawableTOP connections BOTTOM connections

Front Access Connections

Installation: Units rated < 1600A have reduced copper section. Refer to engineered drawings in section D.

Page 33: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.3

B

M-PA

CT

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31FS16TFA41FS16TFA31FS25TFA41FS25TFA32FS32TFA42FS32TFA32FS40TFA42FS40T

Ref. No.

405933405934405935405936405937405938405939405940

Cat. No.

FA31FS16BFA41FS16BFA31FS25BFA41FS25BFA32FS32BFA42FS32BFA32FS40BFA42FS40B

Ref. No.

406033406034406035406036406037406038406039406040

Front Access Connections

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

MS31C16MS41C16MS31C25MS41C25MS32C32MS42C32MS32C40MS42C40

Ref. No.

405341405340405343405342405355405354405365405364

Earthing Device

See page B.7 (bottom)

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MS31M04MS4L1M04MS4R1M04MS31M06MS4L1M06MS4R1M06MS31M08MS4L1M08MS4R1M08MS31M10MS4L1M10MS4R1M10MS31M12MS4L1M12MS4R1M12MS31M16MS4L1M16MS4R1M16MS31M20MS4L1M20MS4R1M20MS31M25MS4L1M25MS4R1M25MS32M20MS4L2M20MS4R2M20MS32M25MS4L2M25MS4R2M25MS32M32MS4L2M32MS4R2M32MS32M40MS4L2M40MS4R2M40

Ref. No.

405803405804405524405805405806405526405807405808405528405809405810405542405811405812405548405813405814405582405815405816405584405817405818405586405819405820405588405821405822405590405823405824405592405825405826405594

Fixed patternTOP connections BOTTOM connections

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliary switches and cluster contacts.

Cassette only

Moving Portion only

Basic cassette with flat copper terminals rear connected.

Page 34: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.4

Ord

er c

odes

B

GE Power Controls

Rear Connections

Rating (A)

400 to 1600

400 to 1600

2000 & 2500

800 to 3200

4000

Cat. No.

RT1HORRT1HORRT1VERRT1VERRT1UNIRT1UNIRT2UNIRT2UNI

N/AN/A

Ref. No.

403680403680403681403681405600405600405601405601

N/AN/A

Type

HorizontalHorizontal

VerticalVertical

UniversalUniversalUniversalUniversalVerticalVertical

Pack

68686868

StandardStandard

Cat. No.

RT1SVFIXRT1SVFIX

--

RT1SNVFIXRT1SNVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIX

Ref. No.

405603405603

--

405609405609405621405621405621405621

Type

VerticalVertical

--

VerticalVerticalVerticalVerticalVerticalVertical

Pack

68--686868

Poles

3434343434

Fixed PatternWithdrawable or CassettesFramesize

1

1

1

2

2

Air Circuit Breaker - TYPE S - 50kA - Automatic

Basic circuit breaker manually operated automatic (with protection), 5 NO and 3 NCauxiliary switches. Withdrawable pattern - basic circuit breaker and cassette with flatcopper terminals rear connected. Fixed Pattern - basic circuit breaker with rear terminalshorizontal.

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MS31W04-AMS4L1W04-AMS4R1W04-AMS31W06-AMS4L1W06-AMS4R1W06-AMS31W08-AMS4L1W08-AMS4R1W08-AMS31W10-AMS4L1W10-AMS4R1W10-AMS31W12-AMS4L1W12-AMS4R1W12-AMS31W12-AMS4L1W16-AMS4R1W16-AMS31W20-AMS4L1W20-AMS4R1W20-AMS31W25-AMS4L1W25-AMS4R1W25-AMS32W20-AMS4L2W20-AMS4R2W20-AMS32W25-AMS4L2W25-AMS4R2W25-AMS32W32-AMS4L2W32-AMS4R2W32-AMS32W40-AMS4L2W40-AMS4R2W40-A

Ref. No.

406177406178406260406179406180406262406181406182406264406183406184406266406185406186406268406185406188406270406189406190406272406191406192406274406193406194406276406195406196406278406197406198406280406199406200406282

Cat. No.

MS31F04-AMS4L1F04-AMS4R1F04-AMS31F06-AMS4L1F06-AMS4R1F06-AMS31F08-AMS4L1F08-AMS4R1F08-AMS31F10-AMS4L1F10-AMS4R1F10-AMS31F12-AMS4L1F12-AMS4R1F12-AMS31F16-AMS4L1F16-AMS4R1F16-AMS31F20-AMS4L1F20-AMS4R1F20-AMS31F25-AMS4L1F25-AMS4R1F25-AMS32F20-AMS4L2F20-AMS4R2F20-AMS32F25-AMS4L2F25-AMS4R2F25-AMS32F32-AMS4L2F32-AMS4R2F32-AMS32F40-AMS4L2F40-AMS4R2F40-A

Ref. No.

405217405216405186405219405218405278405239405238405296405241405240405298405247405246405390405249405248405392405251405250405404405253405252405682405255405254405712405269405268405722405271405270405748405277405276405786

Withdrawable and Fixed PatternWithdrawable Fixed Pattern

Installation: Units rated <1600A have reduced copper section.Refer to engineered drawings in section D

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31WS16TFA41WS16TFA31WS25TFA41WS25TFA32WS32TFA42WS32TFA32WS40TFA42WS40T

Ref. No.

405921405922405923405924405925405926405927405928

Cat. No.

FA31WS16BFA41WS16BFA31WS25BFA41WS25BFA32WS32BFA42WS32BFA32WS40BFA42WS40B

Ref. No.

406021406022406023406024406025406026406027406028

WithdrawableTOP connections BOTTOM connections

Front Access Connections

Page 35: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.5

B

M-PA

CT

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31FS16TFA41FS16TFA31FS25TFA41FS25TFA32FS32TFA42FS32TFA32FS40TFA42FS40T

Ref. No.

405933405934405935405936405937405938405939405940

Cat. No.

FA31FS16BFA41FS16BFA31FS25BFA41FS25BFA32FS32BFA42FS32BFA32FS40BFA42FS40B

Ref. No.

406033406034406035406036406037406038406039406040

Front Access Connections

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

MS31C16MS41C16MS31C25MS41C25MS32C32MS42C32MS32C40MS42C40

Ref. No.

405341405340405343405342405355405354405365405364

Earthing Device

See page B.7 (bottom)

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MS31M04-AMS4L1M04-AMS4R1M04-AMS31M06-AMS4L1M06-AMS4R1M06-AMS31M08-AMS4L1M08-AMS4R1M08-AMS31M10-AMS4L1M10-AMS4R1M10-AMS31M12-AMS4L1M12-AMS4R1M12-AMS31M16-AMS4L1M16-AMS4R1M16-AMS31M20-AMS4L1M20-AMS4R1M20-AMS31M25-AMS4L1M25-AMS4R1M25-AMS32M20-AMS4L2M20-AMS4R2M20-AMS32M25-AMS4L2M25-AMS4R2M25-AMS32M32-AMS4L2M32-AMS4R2M32-AMS32M40-AMS4L2M40-AMS4R2M40-A

Ref. No.

405905405906406162405907405908406164405909405910406166405911405912406168405913405914406170405915405916406172405995405918406174405919405920406176405929405930406208405931405932406214405941405942406216405943405944406218

Fixed patternTOP connections BOTTOM connections

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliary switches and cluster contacts.

Cassette only

Moving Portion only

Basic cassette with flat copper terminals rear connected.

Page 36: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Rear Connections

Rating (A)

400 to 2500

800 to 3200

4000

Cat. No.

RT1UNIRT1UNIRT2UNIRT2UNI

N/AN/A

Ref. No.

405600405600405601405601

N/AN/A

Type

UniversalUniversalUniversalUniversalVerticalVertical

Pack

6868

StandardStandard

Cat. No.

RT1SNVFIXRT1SNVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIX

Ref. No.

405609405609405621405621405621405621

Type

VerticalVerticalVerticalVerticalVerticalVertical

Pack

686868

Poles

343434

Framesize

1

2

2

Air Circuit Breaker - TYPE N - 65kA - Non-auto

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliaryswitches. Withdrawable pattern – basic circuit breaker and cassette with flat copper terminalsrear connected.Fixed pattern – basic circuit breaker with rear terminals horizontal.

B.6

Ord

er c

odes

B

GE Power Controls

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31WN16TFA41WN16TFA31WN25TFA41WN25TFA32WN32TFA42WN32TFA32WN40TFA42WN40T

Ref. No.

405945405946405947405948405949405950405951405952

Cat. No.

FA31WN16BFA41WN16BFA31WN25BFA41WN25BFA32WN32BFA42WN32BFA32WN40BFA42WN40B

Ref. No.

406045406046406047406048406049406050406051406052

Front Access ConnectionsWithdrawable

TOP connections BOTTOM connections

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MN31W04MN4L1W04MN4R1W04MN31W06MN4L1W06MN4R1W06MN31W08MN4L1W08MN4R1W08MN31W10MN4L1W10MN4R1W10MN31W12MN4L1W12MN4R1W12MN31W16MN4L1W16MN4R1W16MN31W20MN4L1W20MN4R1W20MN31W25MN4L1W25MN4R1W25MN32W20MN4L2W20MN4R2W20MN32W25MN4L2W25MN4R2W25MN32W32MN4L2W32MN4R2W32MN32W40MN4L2W40MN4R2W40

Ref. No.

405163405162405430405165405164405432405167405166405434405169405168405436405171405170405438405173405172405456405175405174405458405177405176405460405179405178405462405181405180405464405183405182405466405185405184405468

Cat. No.

MN31F04MN4L1F04MN4R1F04MN31F06MN4L1F06MN4R1F06MN31F08MN4L1F08MN4R1F08MN31F10MN4L1F10MN4R1F10MN31F12MN4L1F12MN4R1F12MN31F16MN4L1F16MN4R1F16MN31F20MN4L1F20MN4R1F20MN31F25MN4L1F25MN4R1F25MN32F20MN4L2F20MN4R2F20MN32F25MN4L2F25MN4R2F25MN32F32MN4L2F32MN4R2F32MN32F40MN4L2F40MN4R2F40

Ref. No.

405193405192405470405195405194405472405197405196405474405199405198405476405201405200405478405203405202405480405205405204405482405207405206405484405209405208405486405211405210405488405213405212405490405215405214405492

Withdrawable and Fixed PatternWithdrawable Fixed Pattern

Fixed PatternWithdrawable or Cassettes

Page 37: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Frame size

1

2

2

Rating (A)

400 to 2500

800 to 3200

4000

Poles

343434

Cat. No.

MN31C25MN41C25MN32C32MN42C32MN32C40MN42C40

Ref. No.

405345405344405347405346405349405348

B.7

B

M-PA

CT

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31FN16TFA41FN16TFA31FN25TFA41FN25TFA32FN32TFA42FN32TFA32FN40TFA42FN40T

Ref. No.

405957405958405959405960405961405962405963405964

Cat. No.

FA31FN16BFA41FN16BFA31FN25BFA41FN25BFA32FN32BFA42FN32BFA32FN40BFA42FN40B

Ref. No.

405557405558 405559 405560 405561 405562 405563 405564

Front Access Connections

Frame size

1

1

2

Rating (A)

400 to 1600

2000 to 2500

3200 to 4000

Poles

343434

Cat. No.

EDF13P16EDF14P16EDF13P25EDF14P25EDF23P40EDF24P40

Ref. No.

405661405660405663405662405665405664

Earthing Device

Fixed patternTOP connections BOTTOM connections

Basic cassette with flat copper terminals rear connected.

Cassette only

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MN31M04MN4L1M04MN4R1M04MN31M06MN4L1M06MN4R1M06MN31M08MN4L1M08MN4R1M08MN31M10MN4L1M10MN4R1M10MN31M12MN4L1M12MN4R1M12MN31M16MN4L1M16MN4R1M16MN31M20MN4L1M20MN4R1M20MN31M25MN4L1M25MN4R1M25MN32M20MN4L2M20MN4R2M20MN32M25MN4L2M25MN4R2M25MN32M32MN4L2M32MN4R2M32MN32M40MN4L2M40MN4R2M40

Ref. No.

405833405834405596405835405836405598405837405838405602405839405840405604405841405842405622405843405844405624405845405846405626405847405848405628405849405850405630405851405852405632405853405854405634405855405856405636

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliary switches and cluster contacts.

Moving Portion only

Page 38: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.8

Ord

er c

odes

B

GE Power Controls

Rear Connections

Rating (A)

400 to 2500

800 to 3200

4000

Cat. No.

RT1UNIRT1UNIRT2UNIRT2UNI

N/AN/A

Ref. No.

405600405600405601405601

N/AN/A

Type

UniversalUniversalUniversalUniversalVerticalVertical

Pack

6868

StandardStandard

Cat. No.

RT1SNVFIXRT1SNVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIX

Ref. No.

405609405609405621405621405621405621

Type

VerticalVerticalVerticalVerticalVerticalVertical

Pack

686868

Poles

343434

Framesize

1

2

2

Air Circuit Breaker - TYPE N - 65kA - Automatic

Basic circuit breaker manually operated automatic (with protection), 5 NO and 3 NCauxiliary switches. Withdrawable pattern - basic circuit breaker and cassette with flat copper terminalsrear connected.Fixed Pattern - basic circuit breaker with rear terminals horizontal.

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31WN16TFA41WN16TFA31WN25TFA41WN25TFA32WN32TFA42WN32TFA32WN40TFA42WN40T

Ref. No.

405945405946405947405948405949405950405951405952

Cat. No.

FA31WN16BFA41WN16BFA31WN25BFA41WN25BFA32WN32BFA42WN32BFA32WN40BFA42WN40B

Ref. No.

406045406046406047406048406049406050406051406052

Front Access ConnectionsWithdrawable

TOP connections BOTTOM connections

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MN31W04-AMN4L1W04-AMN4R1W04-AMN31W06-AMN4L1W06-AMN4R1W06-AMN31W08-AMN4L1W08-AMN4R1W08-AMN31W10-AMN4L1W10-AMN4R1W10-AMN31W12-AMN4L1W12-AMN4R1W12-AMN31W16-AMN4L1W16-AMN4R1W16-AMN31W20-AMN4L1W20-AMN4R1W20-AMN31W25-AMN4L1W25-AMN4R1W25-AMN32W20-AMN4L2W20-AMN4R2W20-AMN32W25-AMN4L2W25-AMN4R2W25-AMN32W32-AMN4L2W32-AMN4R2W32-AMN32W40-AMN4L2W40-AMN4R2W40-A

Ref. No.

405351405350405832405353405352405864405361405360405866405363405362405882405412405410405902405415405414405904405417405416405994405419405418405996405425405424406020405445405444406032405453405452406042405455405454406044

Cat. No.

MN31F04-AMN4L1F04-AMN4R1F04-AMN31F06-AMN4L1F06-AMN4R1F06-AMN31F08-AMN4L1F08-AMN4R1F08-AMN31F10-AMN4L1F10-AMN4R1F10-AMN31F12-AMN4L1F12-AMN4R1F12-AMN31F16-AMN4L1F16-AMN4R1F16-AMN31F20-AMN4L1F20-AMN4R1F20-AMN31F25-AMN4L1F25-AMN4R1F25-AMN32F20-AMN4L2F20-AMN4R2F20-AMN32F25-AMN4L2F25-AMN4R2F25-AMN32F32-AMN4L2F32-AMN4R2F32-AMN32F40-AMN4L2F40-AMN4R2F40-A

Ref. No.

405657405656406054405659405658406094405681405680406096405721405720406098405731405730406114405733405732406116405735405734406118405737405736406120405779405778406122405781405780406124405783405782406126405785405784406128

Withdrawable and Fixed PatternWithdrawable Fixed Pattern

Fixed PatternWithdrawable or Cassettes

Page 39: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.9

B

M-PA

CT

Frame size

1

2

2

Rating (A)

400 to 2500

800 to 3200

4000

Poles

343434

Cat. No.

MN31C25MN41C25MN32C32MN42C32MN32C40MN42C40

Ref. No.

405345405344405347405346405349405348

Frame size

1

1

2

2

Rating (A)

400 to 1600

2000 to 2500

800 to 3200

4000

Poles

34343434

Cat. No.

FA31FN16TFA41FN16TFA31FN25TFA41FN25TFA32FN32TFA42FS32TFA32FS40TFA42FS40T

Ref. No.

405957405958405959405960405961405938405939405940

Cat. No.

FA31FN16BFA41FN16BFA31FN25BFA41FN25BFA32FN32BFA42FN32BFA32FN40BFA42FN40B

Ref. No.

405557405558 405559 405560 405561 405562 405563 405564

Front Access Connections

Frame size

1

1

2

Rating (A)

400 to 1600

2000 to 2500

3200 to 4000

Poles

343434

Cat. No.

EDF13P16EDF14P16EDF13P25EDF14P25EDF23P40EDF24P40

Ref. No.

405661405660405663405662405665405664

Earthing Device

Fixed patternTOP connections BOTTOM connections

Basic cassette with flat copper terminals rear connected.

Cassette only

Frame size

1

1

1

1

1

1

1

1

2

2

2

2

Rating (A)

400

630

800

1000

1250

1600

2000

2500

2000

2500

3200

4000

Poles

344344344344344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MN31M04-AMN4L1M04-AMN4R1M04-AMN31M06-AMN4L1M06-AMN4R1M06-AMN31M08-AMN4L1M08-AMN4R1M08-AMN31M10-AMN4L1M10-AMN4R1M10-AMN31M12-AMN4L1M12-AMN4R1M12-AMN31M16-AMN4L1M16-AMN4R1M16-AMN31M20-AMN4L1M20-AMN4R1M20-AMN31M25-AMN4L1M25-AMN4R1M25-AMN32M20-AMN4L2M20-AMN4R2M20-AMN32M25-AMN4L2M25-AMN4R2M25-AMN32M32-AMN4L2M32-AMN4R2M32-AMN32M40-AMN4L2M40-AMN4R2M40-A

Ref. No.

405953405954406220405955405956406222405965405966406224405967405968406226405969405970406228405971405972406230405977405978406232405979405980406234405981405982406236405983405984406238405989405990406240405991405992406242

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliary switches and cluster contacts.

Moving Portion only

Page 40: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Rear Connections

Rating (A)

800 to 3200

4000

Cat. No.

RT2UNIRT2UNI

N/AN/A

Ref. No.

405601405601

N/AN/A

Type

UniversalUniversalVerticalVertical

Pack

68

StandardStandard

Cat. No.

RT2SNHVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIX

Ref. No.

405621405621405621405621

Type

VerticalVerticalVerticalVertical

Pack

6868

Poles

3434

Framesize

2

2

Fixed PatternWithdrawable or Cassettes

B.10

Ord

er c

odes

B

GE Power Controls

Air Circuit Breaker - TYPE H - 80kA - Non-auto

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliaryswitches. Withdrawable pattern – basic circuit breaker and cassette with flat copper terminalsrear connected.Fixed pattern – basic circuit breaker with rear terminals horizontal.

Frame size

2

2

Rating (A)

800 to 3200

4000

Poles

3434

Cat. No.

FA32WH32TFA42WH32TFA32WH40TFA42WH40T

Ref. No.

405973405974405975405976

Cat. No.

FA32WH32BFA42WH32BFA32WH40BFA42WH40B

Ref. No.

405553405554 405555 405556

Front Access Connections

Frame size

2

2

Rating (A)

800 to 3200

4000

Poles

3434

Cat. No.

FA32FH32TFA42FH32TFA32FH40TFA42FH40T

Ref. No.

405985405986405987405988

Cat. No.

FA32FH32BFA42FH32BFA32FH40BFA42FH40B

Ref. No.

405565405566 405567 405568

Front Access Connections

WithdrawableTOP connections BOTTOM connections

Fixed patternTOP connections BOTTOM connections

Frame size

2

2

2

2

2

2

2

2

Rating (A)

800

1000

1250

1600

2000

2500

3200

4000

Poles

344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MH32W08MH4L2W08MH4R2W08MH32W10MH4L2W10MH4R2W10MH32W12MH4L2W12MH4R2W12MH32W16MH4L2W16MH4R2W16MH32W20MH4L2W20MH4R2W20MH32W25MH4L2W25MH4R2W25MH32W32MH4L2W32MH4R2W32MH32W40MH4L2W40MH4R2W40

Ref. No.

405227405226405494405229405228405496405231405230405498405233405232405500405235405234405502405237405236405504405243405242405506405245405244405508

Cat. No.

MH32F08MH4L2F08MH4R2F08MH32F10MH4L2F10MH4R2F10MH32F12MH4L2F12MH4R2F12MH32F16MH4L2F16MH4R2F16MH32F20MH4L2F20MH4R2F20MH32F25MH4L2F25MH4R2F25MH32F32MH4L2F32MH4R2F32MH32F40MH4L2F40MH4R2F40

Ref. No.

405257405256405509405259405258405510405261405260405512405263405262405514405265405264405516405267405266405518405273405272405520405275405274405522

Withdrawable and Fixed PatternWithdrawable Fixed Pattern

Page 41: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.11

B

M-PA

CT

Frame size

2

2

Rating (A)

800 to 3200

4000

Poles

3434

Cat. No.

MH32C32MH42C32MH32C40MH42C40

Ref. No.

405357405356405359405358

Frame size

2

Rating (A)

800 to 4000

Poles

34

Cat. No.

EDF23P40EDF24P40

Ref. No.

405665405664

Earthing Device

Frame size

2

2

2

2

2

2

2

2

Rating (A)

800800

1000

1250

1600

2000

2500

3200

4000

Poles

344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MH32M08MH4L2M08MH4R2M08MH32M10MH4L2M10MH4R2M10MH32M12MH4L2M12MH4R2M12MH32M16MH4L2M16MH4R2M16MH32M20MH4L2M20MH4R2M20MH32M25MH4L2M25MH4R2M25MH32M32MH4L2M32MH4R2M32MH32M40MH4L2M40MH4R2M40

Ref. No.

405867405868405638405869405870405640405871405872405642405873405874405644405875405876405646405877405878405648405883405884405650405885405886405652

Basic cassette with flat copper terminals rear connected.

Cassette only

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliary switches and cluster contacts.

Moving Portion only

Page 42: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.12

Ord

er c

odes

B

GE Power Controls

Rear Connections

Rating (A)

800 to 3200

4000

Cat. No.

RT2UNIRT2UNI

N/AN/A

Ref. No.

405601405601

N/AN/A

Type

UniversalUniversalVerticalVertical

Pack

68

StandardStandard

Cat. No.

RT2SNHVFIXRT2SNHVFIXRT2SNHVFIXRT2SNHVFIX

Ref. No.

405621405621405621405621

Type

VerticalVerticalVerticalVertical

Pack

6868

Poles

3434

Framesize

2

2

Fixed PatternWithdrawable or Cassettes

Air Circuit Breaker - TYPE H - 80kA - Automatic

Basic circuit breaker manually operated, automatic (with protection), 5 NO and 3NC auxiliary switches.Withdrawable pattern - basic circuit breaker and cassette with flat copper terminalsrear connected.Fixed Pattern - basic circuit breaker with rear terminals horizontal.

Frame size

2

2

Rating (A)

800 to 3200

4000

Poles

3434

Cat. No.

FA32WH32TFA42WH32TFA32WH40TFA42WH40T

Ref. No.

405973405974405975405976

Cat. No.

FA32WH32BFA42WH32BFA32WH40BFA42WH40B

Ref. No.

405553405554 405555 405556

Front Access Connections

Frame size

2

2

Rating (A)

800 to 3200

4000

Poles

3434

Cat. No.

FA32FH32TFA42FH32TFA32FH40TFA42FH40T

Ref. No.

405985405986405987405988

Cat. No.

FA32FH32BFA42FH32BFA32FH40BFA42FH40B

Ref. No.

405565405566 405567 405568

Front Access Connections

WithdrawableTOP connections BOTTOM connections

Fixed patternTOP connections BOTTOM connections

Frame size

2

2

2

2

2

2

2

2

Rating (A)

800

1000

1250

1600

2000

2500

3200

4000

Poles

344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MH32W08-AMH4L2W08-AMH4R2W08-AMH32W10-AMH4L2W10-AMH4R2W10-AMH32W12-AMH4L2W12-AMH4R2W12-AMH32W16-AMH4L2W16-AMH4R2W16-AMH32W20-AMH4L2W20-AMH4R2W20-AMH32W25-AMH4L2W25-AMH4R2W25-AMH32W32-AMH4L2W32-AMH4R2W32-AMH32W40-AMH4L2W40-AMH4R2W40-A

Ref. No.

405797405796406130405799405802406134405801405798406132405829405828406136405831405830406138405859405858406140405861405860406142405863405862406144

Cat. No.

MH32F08-AMH4L2F08-AMH4R2F08-AMH32F10-AMH4L2F10-AMH4R2F10-AMH32F12-AMH4L2F12-AMH4R2F12-AMH32F16-AMH4L2F16-AMH4R2F16-AMH32F20-AMH4L2F20-AMH4R2F20-AMH32F25-AMH4L2F25-AMH4R2F25-AMH32F32-AMH4L2F32-AMH4R2F32-AMH32F40-AMH4L2F40-AMH4R2F40-A

Ref. No.

405881405880406146405889405888406148405891405890406150405893405892406152405895405894406154405897405896406156405899405898406158405901405900406160

Withdrawable and Fixed PatternWithdrawable Fixed Pattern

Page 43: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.13

B

M-PA

CT

Frame size

2

2

Rating (A)

800 to 3200

4000

Poles

3434

Cat. No.

MH32C32MH42C32MH32C40MH42C40

Ref. No.

405357405356405359405358

Frame size

2

Rating (A)

800 to 4000

Poles

34

Ref. No.

405665405664

Earthing Device

Frame size

2

2

2

2

2

2

2

2

Rating (A)

800800

1000

1250

1600

2000

2500

3200

4000

Poles

344344344344344344344344

Positionof the neutral

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

LeftRight

Cat. No.

MH32M08-AMH4L2M08-AMH4R2M08-AMH32M10-AMH4L2M10-AMH4R2M10-AMH32M12-AMH4L2M12-AMH4R2M12-AMH32M16-AMH4L2M16-AMH4R2M16-AMH32M20-AMH4L2M20-AMH4R2M20-AMH32M25-AMH4L2M25-AMH4R2M25-AMH32M32-AMH4L2M32-AMH4R2M32-AMH32M40-AMH4L2M40-AMH4R2M40-A

Ref. No.

405997405998406244405999406000406246406001406002406248406003406004406250406005406006406252406007406008406254406009406010406256406011406012406258

Basic cassette with flat copper terminals rear connected.

Cassette only

Basic circuit breaker manually operated, non automatic, 5 NO and 3 NC auxiliary switches and cluster contacts.

Moving Portion only

Page 44: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

M-PRO Protection

Type

MPRO17 protection unit German VersionMPRO17 protection unitMPRO17 protection unit (English Version) without manual reset buttonMPRO17 protection unit Spanish VersionMPRO17 protection unit French VersionMPRO17 protection unit (French Version) without manual reset buttonMPRO17 protection unit Italian VersionMPRO17 protection unit Dutch VersionMPRO17 O/Current Protection Relay PolishMPRO17 O/Current Protection Relay PortugueseMPRO20 protection unit German VersionMPRO20 protection unitMPRO20 protection unit (English Version) without auto/manual reset buttonMPRO20 protection unit Spanish VersionMPRO20 protection unit French VersionMPRO20 protection unit (French Version) without auto/manual reset buttonMPRO20 protection unit Italian VersionMPRO20 protection unit Dutch VersionMPRO20 O/Current Protection Relay PolishMPRO20 O/Current Protection Relay PortugueseMPRO30H protection unit German VersionMPRO30H protection unitMPRO30H protection unit (English Version) without auto/manual reset buttonMPRO30H protection unit Spanish VersionMPRO30H protection unit French VersionMPRO30H protection unit (French Version) without auto/manual reset buttonMPRO30H protection unit Italian VersionMPRO30H protection unit Dutch VersionMPRO30 O/Current Protection Relay Polish c/w 110-130VDC -250VAC InputMPRO30 O/Current Protection Relay Portuguese c/w 110-130VDC -250VAC InputMPRO30 H protection unit with Restricted Earth Fault only (English)MPRO30L protection unit German VersionMPRO30L protection unitMPRO30L protection unit (English Version) without auto/manual reset buttonMPRO30L protection unit Spanish VersionMPRO30L protection unit French VersionMPRO30L protection unit (French Version) without auto/manual reset buttonMPRO30L protection unit Italian VersionMPRO30L protection unit Dutch VersionMPRO30 O/Current Protection Relay Polish c/w 24-48VDC InputMPRO30 O/Current Protection Relay Portuguese c/w 24-48VDC InputMPRO30 L protection unit with Restricted Earth Fault only (English)MPRO40H protection unit German VersionMPRO40H protection unit English version with MODBUS protocolMPRO40H protection unit (English Version) without auto/manual reset buttonMPRO40H protection unit English version with PROFIBUS protocolMPRO40H protection unit Spanish VersionMPRO40H protection unit French Version with MODBUS protocolMPRO40H protection unit (French Version) without auto/manual reset buttonMPRO40H protection unit French Version with PROFIBUS protocolMPRO40H protection unit Italian VersionMPRO40H protection unit Dutch VersionMPRO40 O/Current Protection Relay Polish c/w 110-130VDC -250VAC InputMPRO40 O/Current Protection Relay Portuguese c/w 110-130VDC -250VAC InputMPRO40L protection unit French Version with PROFIBUS protocolMPRO40L protection unit German VersionMPRO40L protection unit English version with MODBUS protocolMPRO40L protection unit (English Version) without auto/manual reset buttonMPRO40L protection unit English version with PROFIBUS protocolMPRO40L protection unit Spanish VersionMPRO40L protection unit French Version with MODBUS protocolMPRO40L protection unit (French Version) without auto/manual reset buttonMPRO40L protection unit Italian VersionMPRO40L protection unit Dutch VersionMPRO40 O/Current Protection Relay Polish c/w 24-48VDC InputMPRO40 O/Current Protection Relay Portuguese c/w 24-48VDC Input

Ref. No.

406014406030406106406302405126406100406309406316405697405394406015406031406107406303405127406101406310406317405698405395406017406056406109406305405129406103406312406319405700405397406057406016406055406108406304405128406102406311406318405699405396406058406019405534406111405188406307405131406105405190406314406321405702405399405189406018405530406110405187406306405130406104406313406320405701405398

Cat. No.

MPRO17-DEMPRO17-ENGMPRO17-ENGNRMPRO17-ESMPRO17-FRFMPRO17-FRFNRMPRO17-ITMPRO17-NLMPRO17-PLMPRO17-POMPRO20-DEMPRO20-ENGMPRO20-ENGNRMPRO20-ESMPRO20-FRFMPRO20-FRFNRMPRO20-ITMPRO20-NLMPRO20-PLMPRO20-POMPRO30H-DEMPRO30H-ENGMPRO30H-ENGNRMPRO30H-ESMPRO30H-FRFMPRO30H-FRFNRMPRO30H-ITMPRO30H-NLMPRO30H-PLMPRO30H-POMPRO30HRMPRO30L-DEMPRO30L-ENGMPRO30L-ENGNRMPRO30L-ESMPRO30L-FRFMPRO30L-FRFNRMPRO30L-ITMPRO30L-NLMPRO30L-PLMPRO30L-POMPRO30LRMPRO40H-DEMPRO40H-ENGMPRO40H-ENGNRMPRO40H-ENGPROMPRO40H-ESMPRO40H-FRFMPRO40H-FRFNRMPRO40H-FRFPROMPRO40H-ITMPRO40H-NLMPRO40H-PLMPRO40H-POMPRO40L- FRFPROMPRO40L-DEMPRO40L-ENGMPRO40L-ENGNRMPRO40L-ENGPROMPRO40L-ESMPRO40L-FRFMPRO40L-FRFNRMPRO40L-ITMPRO40L-NLMPRO40L-PLMPRO40L-PO

B.14

Ord

er c

odes

B

GE Power Controls

Technical overviewWiring diagrams

Dimensional drawingsNumerical index

Section ASection CSection CSection X

M-PRO Protection Relay

For Earth Fault options please specify on purchase order if system is earthed at switchboard OR at source

Page 45: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

M-PRO Optional Protection

Neutral Protection (MPRO20/30/40 only)Neutral Protection set at 100% (MPRO17)Neutral Protection set at 50% (MPRO17)Neutral Protection set at 63% (MPRO17)Restricted Earth Fault ProtectionStandby Earth Fault ProtectionUnrestricted Earth Fault Protection (MPRO20/30/40 only)Unrestricted Earth Fault Protection (MPRO17)Unrestricted Earth Fault Protection (3 phase 3 wire systems)

Ref. No.

405539405549405541405577405537405538405536405529405535

Cat. No.

MPRONTLMPRONTL100MPRONTL50MPRONTL63MPROREFMPROSEFMPROUEFMPROUEF17MPROUEF3P3W

B.15

B

M-PA

CT

M-PRO Optional Features

Ammeter option for MPRO unitsAuxiliary Power UnitCommunications facility (MODBUS protocol)Communications facility (PROFIBUS protocol)Electrical operations counterMPRO20 / 30 / 40 no-trip/warn only software facility Add-on Mechanical Alarm Contact (1 x N/O)Portable Power Box (for MPRO20/30/40)Portable Test Unit (for MPRO17 only) American power leadPortable Test Unit (for MPRO17 only) Continental Europe power leadPortable Test Unit (for MPRO17 only) UK power leadPortable Test Unit (for MPRO20/30/40) American power leadPortable Test Unit (for MPRO20/30/40) Continental Europe power leadPortable Test Unit (for MPRO20/30/40) UK power lead

Ref. No.

405543405547405545405546405544405540405575405552405224405222405550405225405223405551

Cat. No.

MPROAMMMPROAPUMPROCOMMPROCOM2MPROEOCMPRONTSWMPROMACMPROPPBPTU17 USAPTU17 EuroMPROPTU17PTU USAPTU EuroMPROPTU

M-PRO Optional Protection(1)

M-PRO Optional Features

Shunt Trip (ST)

Motor Operator (MOP)

Closing Coil (CC)

Under voltage Release (UV)

Under voltage Release Time Delayed (UVTD)

Carriage Switch Factory FittedLoose kit Form

Springs charged signal ( x 1 n/o)Springs charged contact ( x 1 c/o)Trip circuit supervision (shunt trip required)

Range

24/30V48V60V

110/130V220/250V380/440V24/30V

48V60V

110/130V110/130V220/250V24/30V

48V60V

110/130V220/250V24/30V

48V60V

110/130V110/130V220/250V380/440V

48V60V

110/130V220/250V380/440V

250V250V

Voltage

DCDCDC

AC/DCAC/DCAC/DC

DCDCDCACDCACDCDCDC

AC/DCAC/DC

DCDCDCACDCACACDCDCACACAC

AC/DCAC/DC

Cat. No.

ST30ST48ST60ST130ST250ST440MOP30MOP48MOP60MOP130AMOP130DMOP250ACC30CC48CC60CC130CC250UV30UV48UV60UV130AUV130DUV250UV440UVTD48UVTD60UVTD130UVTD250UVTD440CSWFFCSWLSCC2WPFCTRIPCS

Ref. No.

405380405382405383405386405388405389405440405442405443405446405917405448405420405422405423405426405428405400405402405403405406405407405408405409406322405435406326405411405413405580405581405450405451406112

(1) Refer to M-PRO specifications on page A.11 for complete data.For Earth Fault options please specify on purchase order if system is earthed at switchboard OR at source

Electrical Accessories

Page 46: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.16

Ord

er c

odes

B

GE Power Controls

Item

1.0 metre length Cable1.6 metre length Cable2.0 metre length Cable2.5 metre length Cable3.0 metre length Cable3.5 metre length Cable4.0 metre length Cable

Cat. No.

100BCMCI160BCMCI200BCMCI250BCMCI300BCMCI350BCMCI400BCMCI

Ref. No.

405531405532405533405610405611405612405613

Cable for InterlocksItem

1.0 metre length Rod1.6 metre length Rod2.0 metre length Rod2.5 metre length Rod3.0 metre length Rod3.5 metre length Rod4.0 metre length Rod

Cat. No.

100RODMCI160RODMCI200RODMCI250RODMCI300RODMCI350RODMCI400RODMCI

Ref. No.

405614405583405585405617405618405619405620

Rod for Interlocks

Item

Castell key breaker Interlock (supplied loose) (1)

Fortress Key Breaker Interlock (supplied loose) (1)

Profalux Key Breaker Interlock (supplied loose) (1)

Profalux Key Cassete Interlock (supplied loose) (1)

Ronis Key Breaker Interlock (factory fitted) (2)

Ronis Key Breaker Interlock (supplied loose) (2)

Ronis Key Breaker Interlock (supplied loose) (1)

Ronis Key Cassete Interlock (factory fitted) (2)

Ronis Key Cassete Interlock (supplied loose) (2)

Ronis Key Cassete Interlock (supplied loose) (1)

Ronis Key Cassete Interlock (factory fitted) (1)

Cat. No.

CASLOKFORLOKPROLOKPROCASRONLKEYRONWKEYRONLOKRONWKEYFFRONCASLDRONCASNKRONCAS

Ref. No.

405570405569405572405574406335406338405571406339406336406337405573

InterlocksItem

Operations counterLeft hand door interlockRight hand door interlockMis-insertion device (factory fitted)Mis-insertion device (supplied loose)IP54 doorLifting truckTitan truck adaptor kit (for M-pact mk1)Electrical Test CertificationCertificate of OriginCertificate of ConformityDark Grey Front CoverLight Grey Front CoverInsulated steel shutter kit F1 3PInsulated steel shutter kit F1 4PInsulated steel shutter kit F2 3PInsulated steel shutter kit F2 4PSpare or replacement racking handle

Cat. No.

MOCDILHSDIRHSACBMIDACBMILIP54DOORACBLIFTTITANTESTCERTCERTORIGINCERTCONFDGFASCIALGFASCIAISSF13PISSF14PISSF23PISSF24PMPRACKHAN

Ref. No.

405576405578405579405605405505405606405607405608406210406211406212405100405101406298406299406300406301406393

Miscellaneous

Framesize

1

2

Type

Withdrawable

Fixed

Withdrawable

Fixed

Poles

34343434

Cat. No.

2WCI3PW2WCI4PW2WCI3PF2WCI4PF2WCIF23PW2WCIF24PW2WCIF23PF2WCIF24PF

Cat. No.

2WRI3PW2WRI4PW2WRI3PF2WRI4PF2WRIF23PW2WRIF24PW2WRIF23PF2WRIF24PF

Ref. No.

406342406343406340406341405459405461405463405465

2 way Interlocking Type A - 2 way interlock

CableRef. No.

406346406347406344406345405467405469405471405473

Rod

Refer to page A.25 for interlock configurations

Cat. No.

B13WCI3PWB13WCI4PWB13WCI3PFB13WCI4PFB13WCIF23PWB13WCIF24PWB13WCIF23PFB13WCIF24PF

Cat. No.

B13WRI3PWB13WRI4PWB13WRI3PFB13WRI4PFB13WRIF23PWB13WRIF24PWB13WRIF23PFB13WRIF24PF

Ref. No.

406350406351406348406349405475405477405479405481

Type B - 1 from 3 way interlock

CableRef. No.

406354406355406352406353405483405485405487405489

Rod

Framesize

1

2

Type

Withdrawable

Fixed

Withdrawable

Fixed

Poles

34343434

Cat. No.

B23WCI3PWB23WCI4PWB23WCI3PFB23WCI4PFB23WCIF23PWB23WCIF24PWB23WCIF23PFB23WCIF24PF

Cat. No.

B23WRIF23PWB23WRIF24PWB23WRIF23PFB23WRIF24PFB23WRI3PWB23WRI4PWB23WRI3PFB23WRI4PF

Ref. No.

406327406329406328406330406253406257406251406255

Type B - 2 from 3 way interlock

CableRef. No.

406261406265406259406263406331406333406332406334

RodCat. No.

C13WCI4PWC13WCIF24PWC13WCI4PFC13WCIF24PFC13WCI3PWC13WCIF23PWC13WCI3PFC13WCIF23PF

Cat. No.

C13WRI4PWC13WRIF24PWC13WRI4PFC13WRIF24PFC13WRI3PWC13WRIF23PWC13WRI3PFC13WRIF23PF

Ref. No.

406387406271406388406269406385406281406386406267

Type C - 1 from 3 way interlock

CableRef. No.

406391406279406392406277406389406275406390406273

Rod

Framesize

1

2

Type

Withdrawable

Fixed

Withdrawable

Fixed

Poles

34343434

Cat. No.

C23WCI3PWC23WCI3PFC23WCIF23PWC23WCIF23PFC23WCI4PFC23WCI4PWC23WCIF24PFC23WCIF24PW

Cat. No.

C23WRI3PWC23WRI3PFC23WRIF23PWC23WRIF23PFC23WRI4PFC23WRI4PWC23WRIF24PFC23WRIF24PW

Ref. No.

406358406356405491405495406357406359405497405493

Type C - 2 from 3 way interlock

CableRef. No.

406362406360405499405503406361406363405507405501

RodCat. No.

D13WCI3PFD13WCI3PWD13WCIF23PFD13WCIF23PWD13WCI4PFD13WCI4PWD13WCIF24PFD13WCIF24PW

Cat. No.

D13WRI3PFD13WRI3PWD13WRIF23PFD13WRIF23PWD13WRI4PFD13WRI4PWD13WRIF24PFD13WRIF24PW

Ref. No.

406364406366405515405511406365406367405517405513

Type D - 1 from 3 way interlock

CableRef. No.

406368406370405523405519406369406371405525405521

Rod

(1) Without lock and key(2) With lock and key

Mechanical Accessories

Page 47: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

B.17

B

M-PA

CT

Frame size

12121212121222

Rating (A)

800

1000

1250

1600

2000

2500

32004000

Cat. No.

ELCT8001ELCT8002ELCT10001ELCT10002ELCT12501ELCT12502ELCT16001ELCT16002ELCT20001ELCT20002ELCT25001ELCT25002ELCT32002ELCT40002

Ref. No.

405683405713405684405714405685405715405686405716405687405717405688405718405689405690

Frame size

12121212121222

Rating (A)

800

1000

1250

1600

2000

2500

32004000

Cat. No.

RCMK8001RCMK8002RCMK10001RCMK10002RCMK12501RCMK12502RCMK16001RCMK16002RCMK20001RCMK20002RCMK25001RCMK25002RCMK32002RCMK40002

Ref. No.

405703405723405704405724405705405725405706405726405707405727405708405728405709405710

Frame size

1122112222

Rating (A)

800 to16002000 to 2500

32004000

800 to16002000 to 2500

32004000

800 to32004000

ACB Type

SSSSNNNNHH

Per Pole

1111111111

Cat. No.

FACS116FAC125FAC232FAC240FACN116FAC125FAC232FAC240FAC232FAC240

Ref. No.

405738405742405744405746405740405742405744405746405744405746

Frame size

1122112222

Rating (A)

800 to 16002000 to 2500

32004000

800 to16002000 to 2500

32004000

800 to 32004000

Cat. No.

MACS116MAC125MAC232MAC240MACN116MAC125MAC232MAC240MAC232MAC240

Ref. No.

405739405743405745405747405741405743405745405747405745405747

Per Pole

3333446666

ACB Type

SSSSNNNNHH

* Rogoswki coil provided with twisted pair of cable (max. length 2 m)

Neutral / Earth Leg (4th) Current Transformer with mounting kit

Neutral (4th) Rogowski Coil with mounting kit*

Fixed Arcing Contact

Moving Arcing Contact

Spare parts

Page 48: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Frame size

1122112222

Rating (A)

800 to16002000 to 2500

32004000

800 to16002000 to 2500

32004000

800 to32004000

ACB Type

SSSSNNNNHH

Per Pole

2222222222

Cat. No.

CLCS116CLC125CLC232CLC240CLCN116CLC125CLC232CLC240CLC232CLC240UNIPLIER

Ref. No.

405769405771405772405773405770405771405772405773405772405773405800

B.18

B

GE Power Controls

Cluster Contacts

Arc Chute

Frame size

112222

Rating (A)

400 to 1600<25003200320040004000

ABC Type

SS & N (1)

S &NH

S &NH

Per Pole

111111

Cat. No.

ARC16ARC25ARC32ARC32HARC40ARC40H

Ref. No.

405787405790405791405788405792405789

Universal Cluster pliers (to remove cluster contact)

1 - for Type S (50kA) 2000 to 2500A

Cassette Side Mounting Details

Frame size

1

2

Pole

3434

Cat. No.

CSMKF13CSMKF14CSMKF23CSMKF24

Ref. No.

406381406382406383406384

Spare parts (continued)

Page 49: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

A

B

C

X

Technical overview

Order codes

Wiring diagramsDimensional drawings

Numerical index

Wiring Diagrams

Circuit breakers

M-PRO 17 relay

M-PRO 20/30/40 relay

Dimensional drawings

Circuit Breaker - Type S - 50kA

Horizontal, Rear Access Connection - Fixed Pattern

Rear Access Connection - Withdrawable Pattern

Front Access Connection - Withdrawable Pattern

Front Access Connection - Fixed Pattern

Circuit Breaker - Type N - 65kA

Horizontal, Rear Access Connection - Fixed Pattern

Rear Access Connection - Withdrawable Pattern

Front Access Connection - Fixed Pattern

Front Access Connection - Withdrawable Pattern

Circuit Breaker - Type H - 80kA

Horizontal, Rear Access Connection - Fixed Pattern

Rear Access Connection - Withdrawable Pattern

Front Access Connection - Fixed Pattern

Front Access Connection - Withdrawable Pattern

Adaptor Connections

Copper Connection - Front Access

IP54 Door

Door Cut-outs

Cassette mounting details

2-Way Cable Interlocking

3-Way Cable Interlocking

C.3

C.3

C.4

C.5

C.6

C.9

C.13

C.15

C.18

C.21

C.24

C.25

C.29

C.30

C.32

C.33

C.34

C.35

C.35

C.36

C.37

C.38

C.39

C.1

Page 50: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.2

Wir

ing

Dia

gram

s

C

GE Power Controls

Notes

Page 51: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.3

C

M-PA

CT

Wiring Diagram

B1 to B16C1 to C16D1 to D6D7 to D12D13 to D18

Automatic disconnect L.T. blocksAutomatic disconnect L.T. blocksCarriage switch blocks for disconnected position(1)

Carriage switch blocks for test position(1)

Carriage switch blocks for connected position(1)

Terminal References

Disconnected indicationTest indicationConnected indicationACB tripped indicationACB OFF indicationACB ON indication

Closing springs charged indicationClosing coilUndervoltage releaseTime delayed undervoltage releaseM-PRO trip alarm (N/O)Charging motor limit switchClosing spring charging motorShunt trip

Key

LP1LP2LP3LP4LP5LP6

Optional featuresLP7CCUVUVTDALMLMST

(1) Changeover contacts can be reconfigured by user.

Page 52: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Location

LT ‘A’ blockLT ‘A’ blockLT ‘B’ blockLT ‘B’ block

Terminal

A8A9B5B6

Function

Remote Rogowski coil – positive for earth fault and/or neutral protectionRemote Rogowski coil – negative for earth fault and/or neutral protectionAuxiliary power supply input - positive Auxiliary power supply input – negative

Connections for M-PRO 17

C.4

Wir

ing

Dia

gram

s

C

Wiring Diagram M-PRO 17

Page 53: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C

M-PA

CT

Location

PAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMMPAMM

LT ‘B’ blockLT ‘B’ blockLT ‘B’ blockLT ‘B’ block

Terminal

-------------

A14A15

--

B5B6

Terminal

A1A2A3A4A5A6A7A8A9A10A11A12A13A14A15B3B4B5B6

Terminal

A1A2A3A4A5A6A7A8A9A10A11A12A13A14A15B3B4B5B6

Function

OUTPUT 4, normally open volt free contact: Operates when the REF (or SEF) element trips the ACBThis is used to trip an upstream HV breaker.OUTPUT 3, normally open volt free contact: Operates when M-Pro has opened the ACB due to a trip condition.OUTPUT 2, normally open volt free contact: Load monitoring output operates if pre-trip alarm or load shedding limits are exceeded.OUTPUT 1, normally closed volt free contact, opens under the following conditions: Microprocessormalfunction, primary contact maintenance alarm or a digital input is active. Input 4Input 3Input 2Input 1Input commonRemote Rogowski coil – positive for earth fault and/or neutral protectionRemote Rogowski coil – negative for earth fault and/or neutral protectionEarth leg CT input – non polarised

Auxiliary power supply input – positive Auxiliary power supply input – negative

Connections for M-PRO 20/30/40

C.5

Wiring Diagram M-PRO 20/30/40

M-PRO 20 M-PRO 30 M-PRO 40

Page 54: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.6

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type S - 4 pole - Frame size 1, In = 400A to 1600A (max)

Type S - 3 pole - Frame size 1, In = 400A to 1600A (max)

Horizontal, Rear Access Connection Fixed Pattern

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200 mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Page 55: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Type S - 4 pole - Frame size 1, In = 2000A and 2500A (max)

Type S - 3 pole - Frame size 1, In = 2000A and 2500A (max)

C.7

C

M-PA

CT

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200 mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200 mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Horizontal, Rear Access Connection Fixed Pattern

Page 56: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.8

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type S - 4 pole - Frame size 2, In = 2000A to 4000A (max)

Type S - 3 pole - Frame size 2, In = 2000A to 4000A (max)

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200 mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

Horizontal, Rear Access Connection Fixed Pattern

Page 57: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.9

C

M-PA

CT

Type S - 4 pole - Frame size 1, In = 400A to 1600A (max)

Type S - 3 pole - Frame size 1, In = 400A to 1600A (max)

Connected 414

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200 mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Connected 414

Ventilation

Minimum clearance to cassette side.

382 to door

35 Test

50 Disconnected275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200 mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Rear Access Connection Withdrawable Pattern

Page 58: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.10

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type S - 4 pole - Frame size 1, In = 2000A & 2500A (max)

Type S - 3 pole - Frame size 1, In = 2000A & 2500A (max)

Connected 414

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Connected 414

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Rear Access Connection Withdrawable Pattern

Page 59: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.11

C

M-PA

CT

Type S - 4 pole - Frame size 2, In = 2000A to 3200A (max)

Type S - 3 pole - Frame size 2, In = 2000A to 3200A (max)

Connected 414

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Connected 414

Ventilation

Minimum clearanceto cassette side.

382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Rear Access Connection Withdrawable Pattern

Page 60: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.12

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Connected 414

Must not be removedor fitted horizontally

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

382 to door

Must not be removedor fitted horizontally

Fascia centre

Fasc

ia c

entre

Centre line ofoperating panel

Centre line of operating panel Connected 414 35 Test50 Disconnected

275 Fully withdrawn

Ventilation

Minimum clearance to cassette side.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Rear Access Connection Withdrawable Pattern

Type S - 4 pole - Frame size 2, In = 4000A (max)

Type S - 3 pole - Frame size 2, In = 4000A (max)

Page 61: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

C.13

C

M-PA

CT

Type S - 4 pole - Frame size 1, In = 400A to 1600A (max)

Front Access Connection Withdrawable Pattern

Type S - 3 pole - Frame size 1, In = 400A to 1600A (max)

Page 62: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.14

Dim

ensi

onal

Dra

win

gs

GE Power Controls

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Type S - 4 pole - Frame size 1, In = 2000A & 2500A (max)

Front Access Connection Withdrawable Pattern

Type S - 3 pole - Frame size 1, In = 2000A & 2500A (max)

C

Page 63: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.15

M-PA

CT

Type S - 4 pole - Frame size 2, In = 3200A & 4000A (max)

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum space to earth metal and for arc chute removal

100 to door

182 MinArc chute removal

Minimum clearance to breaker side.

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

ia c

entre

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimension

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum space to earth metal and for arc chute removal

100 to door

182 MinArc chute removal

Minimum clearance to breaker side.

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

ia c

entre

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimension

Front Access Connection Fixed Pattern

Type S - 3 pole - Frame size 2, In = 3200A & 4000A (max)

C

Page 64: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.16

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

382 to doorMinimum clearance

to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

382 to doorMinimum clearance

to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Front Access Connection Withdrawable Pattern

Type S - 4 pole - Frame size 1, In = 400A to 2500A (max)

Type S - 3 pole - Frame size 1, In = 400A to 2500A (max)

Page 65: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.17

C

M-PA

CT

382 to door

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum clearance to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimension

382 to door

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum clearance to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimension

Type S - 4 pole - Frame size 2, In = 3200A & 4000A (max)

Type S - 3 pole - Frame size 2, In = 3200A & 4000A (max)

Front Access Connection Withdrawable Pattern

Page 66: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.18

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type N - 4 pole - Frame size 1, In = 400A to 1600A (max)

Type N - 3 pole - Frame size 1, In = 400A to 1600A (max)

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

Insulated metal or insulated sheet (customer supplied)Minimum space to earth metal

and for arc chute removal182 Min

Arc chute removal

100 to door

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line of operatingpanel

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Horizontal, Rear Access Connection Fixed Pattern

Page 67: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.19

C

M-PA

CT

Type N - 4 pole - Frame size 1, In = 2000A and 2500A (max)

Type N - 3 pole - Frame size 1, In = 2000A and 2500A (max)

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Horizontal, Rear Access Connection Fixed Pattern

Page 68: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.20

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type N - 4 pole - Frame size 2, In = 2000A to 4000A (max)

Type N - 3 pole - Frame size 2, In = 2000A to 4000A (max)

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

Insulated metal or insulated sheet (customer supplied)

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum space to earth metal and for arc chute removal

Arc chuteremoval

Centre line of operating panel

Centre line of operating panel

Fasc

ia

cent

re

Fascia centre

100 to door

182 Min

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Horizontal, Rear Access Connection Fixed Pattern

Page 69: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.21

C

M-PA

CT

Type N - 4 pole - Frame size 1, In = 400A to 2500A (max)

Type N - 3 pole - Frame size 1, In = 400A to 2500A (max)

Connected 414

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Minimum clearanceto cassette side 382 to door

35 Test Connected 414 50 Disconnected

275 Fully withdrawn

Ventilation

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H. Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

Centre line of operating panel

Centre line of operating panel

Fasc

ia

cent

re

Fascia centre

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Rear Access Connection Withdrawable Pattern

Page 70: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.22

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type N - 4 pole - Frame size 2, In = 2000A to 3200A (max)

Type N - 3 pole - Frame size 2, In = 2000A to 3200A (max)

Connected 414

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Minimum clearanceto cassette side

Ventilation382 to door

35 Test Connected 414 50 Disconnected

275 Fully withdrawn

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H. Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

Centre line of operating panel

Centre line of operating panel

Fasc

ia

cent

re

Fasciacentre

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Rear Access Connection Withdrawable Pattern

Page 71: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.23

C

M-PA

CT

Type N - 4 pole - Frame size 2, In = 4000A (max)

Type N - 3 pole - Frame size 2, In = 4000A (max)

Connected 414

Must not be removedor fitted horizontally

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Connected 414

Must not be removedor fitted horizontally

Ventilation

Minimum clearance to cassette side.

382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.

Centre line of operating panel

Centre line ofoperating panel

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Rear Access Connection Withdrawable Pattern

Page 72: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.24

Dim

ensi

onal

Dra

win

gs

GE Power Controls

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Arc chute removal

Minimum space to earth metaland for arc chute removal

Insulated metal or insulated sheet (customer supplied)

100 to door

Minimum clearance to breaker side.

Fascia centre

ACB fascia cut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fasc

ia c

entre

182 Min

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Insulated metal or insulated sheet (customer supplied)

100 to door

Minimum space to earth metal and for arc chute removal Minimum clearance

to breaker side.

Fascia centre

Fasc

ia c

entre

182 MinArc chute removal

ACB fascia cut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Front Access Connection Fixed Pattern

Type N - 4 pole - Frame size 1, In = 400A to 1600A (max)

Type N - 3 pole - Frame size 1, In = 400A to 1600A (max)

C

Page 73: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.25

M-PA

CT

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Front Access Connection Withdrawable Pattern

Type N - 4 pole - Frame size 1, In = 2000A & 2500A (max)

Type N - 3 pole - Frame size 1, In = 2000A & 2500A (max)

C

Page 74: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.26

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type N - 4 pole - Frame size 2, In = 2000A to 4000A (max)

100 to door

Minimum space to earth metal and for arc chute removal

182 MinArc chute removal

Minimum clearance to breaker side.

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

ia c

entre

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Minimum space to earth metal and for arc chute removal

182 MinMinimum clearance

to breaker side.

100 to door

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Fascia centre

Fasc

ia c

entre

Insulated metal or insulated sheet (customer supplied)

Arc chute removal

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Type N - 3 pole - Frame size 2, In = 2000A to 4000A (max)

Front Access Connection Fixed Pattern

Page 75: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.27

C

M-PA

CT

Type N - 4 pole - Frame size 1, In = 400A to 2500A (max)

Type N - 3 pole - Frame size 1, In = 400A to 2500A (max)

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum clearance to cassette side.382 to door

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

382 to doorMinimum clearance

to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Front Access Connection Withdrawable Pattern

Page 76: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.28

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Type N - 4 pole - Frame size 2, In = 2000A to 4000A (max)

Type N - 3 pole - Frame size 2, In = 2000A to 4000A (max)

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum clearance to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

382 to door

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

382 to door

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum clearance to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Front Access Connection Withdrawable Pattern

Page 77: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.29

C

M-PA

CT

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

Minimum space to earth metaland for arc chute removal

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

182 MinArc chuteremoval

100 to door

Insulated metal or insulated sheet (customer supplied)

Fascia centre

Fasc

iace

ntre

Centre line of operating panel

Centre line ofoperating panel

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

Horizontal, Rear Access Connection Fixed Pattern

Type H - 4 pole - Frame size 2, In = 800A to 4000A (max)

Type H - 3 pole - Frame size 2, In = 800A to 4000A (max)

Page 78: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.30

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Connected 414

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Connected 414

Ventilation

Minimum clearanceto cassette side.

382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.Captive plate behind copper terminal, tapped M10 x 1.5 6H.Minimum insertion of screw 16mm. Maximum insertion of screw 34mm.

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Rear Access Connection Withdrawable Pattern

Type H - 4 pole - Frame size 2, In = 800A to 3200A (max)

Type H - 3 pole - Frame size 2, In = 800A to 3200A (max)

Page 79: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.31

C

M-PA

CT

Connected 414

Must not be removedor fitted horizontally

Ventilation

Minimum clearance to cassette side. 382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line ofoperating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Connected 414

Must not be removedor fitted horizontally

Ventilation

Minimum clearanceto cassette side.

382 to door

35 Test50 Disconnected

275 Fully withdrawn

Fasc

iace

ntre

Fasciacentre

Centre line of operating panel

Centre line ofoperating panel

Copperwork must be supported within 200mm of breaker connections – busbars or cables.All connections to be tightened to 50Nm.

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Rear Access Connection Withdrawable Pattern

Type H - 4 pole - Frame size 2, In = 4000A (max)

Type H - 3 pole - Frame size 2, In = 4000A (max)

Page 80: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.32

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Minimum space to earth metal and for arc chute removal

100 to door

Minimum clearance to breaker side.

Fascia centre

Fasc

ia c

entre

Arc chute removal

182 Min

Insulated metal or insulated sheet (customer supplied)

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

Arc chute removal

182 Min

100 to door

Minimum space to earth metal and for arc chute Minimum clearance to

breaker side.

Fascia centre

Fasc

ia c

entre

Insulated metal or insulated sheet (customer supplied)

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Front Access Connection Fixed Pattern

Type H - 4 pole - Frame size 2, In = 800A to 4000A (max)

Type H - 3 pole - Frame size 2, In = 800A to 4000A (max)

Page 81: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.33

C

M-PA

CT

Type H - 4 pole - Frame size 2, In = 800A to 4000A (max)

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

382 to doorMinimum clearance

to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

The cut-out dimensions give an

approximate nominal clearance of 3mm around ACB fascia. These sizes are for

guidance and can be scaled if a different aperture is required.

ACB fasciacut-out dimensions

Copperwork must be supported within 200mm of breaker connections – busbars or cables. All connections to be tightened to 50Nm.

382 to doorMinimum clearance

to cassette side.

Fascia centre

Fasc

ia c

entre

Connected 41450 Disconnected 35 Test

Front Access Connection Withdrawable Pattern

Type H - 3 pole - Frame size 2, In = 800A to 4000A (max)

Page 82: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.34

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Adaptor Connections (for cassette only)

Rear Adapter Vertical / Horizontal Connection

Rear Adapter Vertical Connection Rear Adapter Horizontal Connection

Type S - Frame 1 - In = 2000A & 2500A (max)Type N - Frame 1 - In = 400A to 2500A (max)

Type S - Frame 2 - In = 2000A to 3200A (max)Type N - Frame 2 - In = 2000A to 3200A (max)Type H - Frame 2 - In = 800A to 3200A (max)

Type S - Frame 1 - In = 400A to 1600A (max) Type S - Frame 1 - In = 400A to 1600A (max)

Page 83: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.35

C

M-PA

CT

Copper Connections - Front Access (Fixed and/or Withdrawable)

IP54 Door (Withdrawable unit only)

479

391

114.5

Type S - Frame 1 - In = 400A to 2500A (max)Type N - Frame 1 - In = 400A to 2500A (max)

Type S - Frame 2 - In = 2000A to 4000AType N - Frame 2 - In = 2000A to 4000AType H - Frame 2 - In = 800A to 4000A

Page 84: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.36

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

Door Cut-Outs

Withdrawable Pattern - Cubicle Door/Panel

Fixed Pattern - Facia Cut-out

= 42,5

= 102,5

Frame 1 Frame 2

The cut-out dimensions shown above givean approximate nominal clearance of 3mm aroundACB fascia. These sizes are for guidanceand can be scaled if a different apertureis required.

Datum for 16 off Ø 4 holes in door / panel– bottom left hand corner of cassette

viewed from front.

Frame 1 - Up to 2500A max. = 40Frame 2 - Up to 4000A max. = 100

16 off 3.0 x 6Self tapping screws

Escutcheon(LLA11PD055)

Escutcheon seal(LLA11RS001)

ACB fascia

Page 85: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.37

C

M-PA

CT

Cassette

Cassette mounting details

9,6

Ventilation in baseof cassette

(leave unobstructed)

All holes4 Pole only

3 Pole 268

3 Pole 287

3 Pole 329

4 Pole 368

4 Pole 387

4 Pole 429

Centre lineof operating panel

Terminals

Cassette viewed from topType 'S', In = 400 to 2500 A (max.)Type 'N', In = 400 to 2500 A (max.)

9,6

Ventilation in baseof cassette

(leave unobstructed)

6 Holes

3 Pole 358

3 Pole 419

4 Pole 488

4 Pole 549

Centre line of operating panel

Terminals

Cassette viewed from topType 'S', In = 3200 and 4000 AType 'N', In = 3200 and 4000 AType 'H', In = 800 to 4000 A

Type S - Frame 1 - In = 400A to 2500A (max)Type N - Frame 1 - In = 400A to 2500A (max)

Type S - Frame 2 - In = 2000A to 4000AType N - Frame 2 - In = 2000A to 4000AType H - Frame 2 - In = 800A to 4000A

Page 86: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.38

Dim

ensi

onal

Dra

win

gs

C

GE Power Controls

2-Way Cable Interlocking

Withdrawable Pattern - Front/Rear Access

Fixed Pattern - Front/Rear Access

2000 Max

140

Min

900

Max

ver

tical

bas

e to

bas

e

Min. bend radius 120 Min. bend radius 120

2000 Max

140

Min

900

Max

ver

tical

bas

e to

bas

e

Min. bend radius 120 Min. bend radius 120

Min. clearance below cassette

Min. clearance below cassette

Page 87: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

C.39

M-PA

CT

3-Way Cable Interlocking

Withdrawable Pattern - Front/Rear Access

Fixed Pattern - Front/Rear Access

C

Page 88: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

X.2 GE Power Controls

Inde

xN

umer

ical

ind

ex

X

GE Power Controls

Ref. No. Page403...

403680403681

405...405102405103405104405105405106405107405108405109405110405111405112405113405114405115405116405117405118405119405120405121405122405123405124405125405132405133405134405135405136405137405138405139405140405141405142405143405144405145405146405147405148405149405150405151405152405153405154405155405162405163405164405165405166405167405168405169405170405171405172405173405174405175405176405177405178405179405180405181405182405183405184405185405192405193405194405195405196405197405198405199405200405201405202405203405204405205405206405207405208405209

B.2B.2

B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4

Ref. No. Page Ref. No. PageB.9B.9B.9B.9B.9B.9B.9B.4B.4B.4B.4B.4B.9B.9B.9B.9B.9B.9B.9B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.3B.3B.3B.8B.8B.8B.8B.8B.8B.8B.8B.3B.8B.8B.8B.8B.3B.8B.8B.8B.8B.6B.6B.6B.6B.5B.5B.5B.5B.5B.5B.5B.5B.6B.6B.6B.6B.9B.9B.9

Ref. No. PageB.9B.9B.9B.8B.9B.9B.9B.9B.9B.3B.3B.3B.3B.3B.3B.3B.5B.5

B.2, B.4B.2, B.4

B.5B.5B.9B.9B.9B.9B.5B.5B.5B.5B.5B.5B.5B.5B.7B.7B.7B.7B.7B.7B.7B.7B.5B.5B.5B.5

B.5, B.7B.5, B.7

B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.10B.11B.11B.11B.11B.11B.11B.11B.11

Ref. No. Page405800405803405804405805405806405807405808405809405810405811405812405813405814405815405816405817405818405819405820405821405822405823405824405825405826405833405834405835405836405837405838405839405840405841405842405843405844405845405846405847405848405849405850405851405852405853405854405855405856405867405868405869405870405871405872405873405874405875405876405877405878405883405884405885405886405917405921405922405923405924405925405926405927405928405933405934405935405936405937405938405939405940405945405946405947405948405949405950405951405952405957405958405959405960

B.11B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.3B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.5B.7B.7B.7B.7B.7B.7B.7B.7B.7B.7B.7B.7B.7B.7B.7B.7B.9B.2B.2B.2B.2B.2B.2B.2B.2B.3B.3B.3B.3B.3B.3B.3B.3B.4B.4B.4B.4B.4B.4B.4B.4B.5B.5B.5B.5

Ref. No. PageB.5B.5B.5B.5B.6B.6B.6B.6B.6B.6B.6B.6

B.2B.2B.2B.2B.2B.2B.2B.2B.8B.8B.3B.3B.3B.3B.3B.3B.3B.3B.4B.4B.4B.4B.4B.4B.4B.4B.8B.8B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9

405210405211405212405213405214405215405226405227405228405229405230405231405232405233405234405235405236405237405242405243405244405245405256405257405258405259405260405261405262405263405264405265405266405267405272405273405274405275405316405318405320405322405324405326405328405330405332405334405336405338405340405341405342405343405344405345405346405347405348405349405354405355405356405357405358405359405364405365405366405368405370405372405374405376405378405380405381405382405383405384405386405387405388405389405391405393405400405402405403405406405407405408405409405411

B.4B.4B.4B.4B.4B.4B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.3B.3B.3B.3B.5B.5B.5B.5B.5B.5B.3B.3B.7B.7B.7B.7B.3B.3B.2B.2B.2B.2B.2B.2B.2B.9B.2B.9B.9B.2B.9B.2B.9B.9B.2B.2B.9B.9B.9B.9B.9B.9B.9B.9

405413405415405420405422405424405426405428405430405432405434405436405438405440405442405444405446405448405450405451405456405458405460405462405464405466405468405470405472405474405476405478405480405482405484405486405488405490405492405494405496405498405500405502405504405506405508405509405510405512405514405516405518405520405522405524405526405528405530405534405535405536405537405538405539405541405542405543405544405545405547405548405549405550405551405552405553405554405555405556405557405558405559405560405561405562405563405564405565405566405567405568405569405570405571

405572405573405574405575405576405578405579405580405581405582405584405586405588405590405592405594405596405598405600405601405602405604405605405606405607405608405622405624405626405628405630405632405634405636405638405640405642405644405646405648405650405652405660405661405662405663405664405665405683405684405685405686405687405688405689405690405703405704405705405706405707405708405709405710405713405714405715405716405717405718405723405724405725405726405727405728405738405739405740405741405742405743405744405745405746405747405769405770405771405772405773405790405791405792

Numerical index Reference number

405961405962405963405964405973405974405975405976405985405986405987405988

406...406021406022406023406024406025406026406027406028406030406031406033406034406035406036406037406038406039406040406045406046406047406048406049406050406051406052406055406056406322406326406338406340406341406342406343406344406345406346406347406348406349406350406351406352406353406354406355406356406357406358406359406360406361406362406363406364406365406366406367406368406369406370406371

Page 89: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

X.3

Num

éro de référenceC

atalogue number

X

The policy of GE PowerControls is one ofcontinuous improve-ment. The right is reserved toalter the design or anystructural details ofthe products at anytime without givingnotice.

April 2002GE Power Controls

Numerical index Catalogue number

Cat. No. Page Cat. No. Page Cat. No. Page2WCI3PF2WCI3PW2WCI4PF2WCI4PW

2WPFC2WRI3PF2WRI3PW2WRI4PF2WRI4PWACBLIFTACBMID

B13WCI3PFB13WCI3PWB13WCI4PFB13WCI4PWB13WRI3PFB13WRI3PWB13WRI4PFB13WRI4PWC23WCI3PFC23WCI3PWC23WCI4PFC23WCI4PWC23WRI3PFC23WRI3PWC23WRI4PFC23WRI4PW

CASLOKCC130CC250CC30CC48CC60

CSWFFCSWL

D13WCI3PFD13WCI3PWD13WCI4PFD13WCI4PWD13WRI3PFD13WRI3PWD13WRI4PFD13WRI4PW

DILHSDIRHS

FA31FN16BFA31FN16TFA31FN25BFA31FN25TFA31FS16BFA31FS16TFA31FS25BFA31FS25TFA31WN16BFA31WN16TFA31WN25BFA31WN25TFA31WS16BFA31WS16TFA31WS25BFA31WS25TFA32FH32BFA32FH32TFA32FH40BFA32FH40TFA32FN32BFA32FN32TFA32FN40BFA32FN40TFA32FS32BFA32FS32TFA32FS40BFA32FS40TFA32WH32BFA32WH32TFA32WH40BFA32WH40TFA32WN32BFA32WN32TFA32WN40BFA32WN40TFA32WS32BFA32WS32TFA32WS40BFA32WS40TFA41FN16BFA41FN16TFA41FN25B

B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.5B.5B.5B.5B.3B.3B.3B.3B.4B.4B.4B.4B.2B.2B.2B.2B.6B.6B.6B.6B.5B.5B.5B.5B.3B.3B.3B.3B.6B.6B.6B.6B.4B.4B.4B.4B.2B.2B.2B.2B.5B.5B.5

B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.6B.7B.7B.7B.7B.7B.7B.7B.7B.6B.6B.6B.6B.6B.6B.6B.6B.5B.4B.4B.4B.4B.4B.4B.4B.4B.5B.5B.5B.5B.5B.5B.5B.5B.4B.4B.4B.4B.4B.4B.4B.4B.5B.5B.4B.4B.4B.4B.5B.5B.5B.5B.4B.4B.4B.4B.5B.5B.5B.4B.4B.4B.4B.4B.4B.4B.4B.5B.5B.5B.5B.5B.5B.5B.5B.4B.4B.4

FA41FN25TFA41FS16BFA41FS16TFA41FS25BFA41FS25TFA41WN16BFA41WN16TFA41WN25BFA41WN25TFA41WS16BFA41WS16TFA41WS25BFA41WS25TFA42FH32BFA42FH32TFA42FH40BFA42FH40TFA42FN32BFA42FN32TFA42FN40BFA42FN40TFA42FS32BFA42FS32TFA42FS40BFA42FS40TFA42WH32BFA42WH32TFA42WH40BFA42WH40TFA42WN32BFA42WN32TFA42WN40BFA42WN40TFA42WS32BFA42WS32TFA42WS40BFA42WS40T

FORLOKIP54DOORMH32C32MH32C40MH32F08MH32F10MH32F12MH32F16MH32F20MH32F25MH32F32MH32F40MH32M08MH32M10MH32M12MH32M16MH32M20MH32M25MH32M32MH32M40MH32W08MH32W10MH32W12MH32W16MH32W20MH32W25MH32W32MH32W40MH42C32MH42C40MH4L2F08MH4L2F10MH4L2F12MH4L2F16MH4L2F20MH4L2F25MH4L2F32MH4L2F40MH4L2M08MH4L2M10MH4L2M12MH4L2M16MH4L2M20MH4L2M25MH4L2M32MH4L2M40MH4L2W08MH4L2W10MH4L2W12MH4L2W16MH4L2W20

B.5B.3B.3B.3B.3B.4B.4B.4B.4B.2B.2B.2B.2B.6B.6B.6B.6B.5B.5B.5B.5B.3B.3B.3B.3B.6B.6B.6B.6B.4B.4B.4B.4B.2B.2B.2B.2B.9B.9B.7B.7B.6B.6B.6B.6B.6B.6B.6B.6B.7B.7B.7B.7B.7B.7B.7B.7B.6B.6B.6B.6B.6B.6B.6B.6B.7B.7B.6B.6B.6B.6B.6B.6B.6B.6B.7B.7B.7B.7B.7B.7B.7B.7B.6B.6B.6B.6B.6

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

Cat. No. PageB.4B.4B.4B.4B.4B.4B.4B.4B.4B.5B.5B.5B.5B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.5B.5B.5B.5B.5B.5B.5B.5B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.4B.5B.5B.5B.5B.4B.4B.4B.4B.9B.9B.9B.9B.9B.9B.9B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.8B.3B.3B.2B.2B.2B.2B.2

MN4L1W10MN4L1W12MN4L1W16MN4L1W20MN4L1W25MN4L2F20MN4L2F25MN4L2F32MN4L2F40MN4L2M20MN4L2M25MN4L2M32MN4L2M40MN4L2W20MN4L2W25MN4L2W32MN4L2W40MN4R1F04MN4R1F06MN4R1F08MN4R1F10MN4R1F12MN4R1F16MN4R1F20MN4R1F25MN4R1M04MN4R1M06MN4R1M08MN4R1M10MN4R1M12MN4R1M16MN4R1M20MN4R1M25MN4R1W04MN4R1W06MN4R1W08MN4R1W10MN4R1W12MN4R1W16MN4R1W20MN4R1W25MN4R2F20MN4R2F25MN4R2F32MN4R2F40MN4R2M20MN4R2M25MN4R2M32MN4R2M40MN4R2W20MN4R2W25MN4R2W32MN4R2W40

MOCMOP130AMOP130DMOP250A

MOP30MOP48MOP60

MPRO17MPRO20

MPRO30H MPRO30LMPRO40H MPRO40L

MPROAMMMPROAPUMPROCOMMPROEOCMPROMACMPRONTL

MPRONTL 50MPRONTL 100

MPROPPBMPROPTU

MPROPTU17MPROREFMPROSEFMPROUEF

MPROUEF3P3WMS31C16MS31C25MS31F04MS31F06MS31F08MS31F10MS31F12

Cat. No. PageB.2B.2B.2B.3B.3B.3B.3B.3B.3B.3B.3B.2B.2B.2B.2B.2B.2B.2B.2B.3B.3B.2B.2B.2B.2B.3B.3B.3B.3B.2B.2B.2B.2B.3B.3B.3B.3B.2B.2B.2B.2B.2B.2B.2B.2B.3B.3B.3B.3B.3B.3B.3B.3B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.3B.3B.3B.3B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.3B.3B.3B.3B.3B.3B.3

MS31F16MS31F20MS31F25MS31M04MS31M06MS31M08MS31M10MS31M12MS31M16MS31M20MS31M25MS31W04MS31W06MS31W08MS31W10MS31W12MS31W16MS31W20MS31W25MS32C32MS32C40MS32F20MS32F25MS32F32MS32F40MS32M20MS32M25MS32M32MS32M40MS32W20MS32W25MS32W32MS32W40MS41C16MS41C25MS42C32MS42C40MS4L1F04MS4L1F06MS4L1F08MS4L1F10MS4L1F12MS4L1F16MS4L1F20MS4L1F25MS4L1M04MS4L1M06MS4L1M08MS4L1M10MS4L1M12MS4L1M16MS4L1M20MS4L1M25MS4L1W04MS4L1W06MS4L1W08MS4L1W10MS4L1W12MS4L1W16MS4L1W20MS4L1W25MS4L2F20MS4L2F25MS4L2F32MS4L2F40MS4L2M20MS4L2M25MS4L2M32MS4L2M40MS4L2W20MS4L2W25MS4L2W32MS4L2W40MS4R1F04MS4R1F06MS4R1F08MS4R1F10MS4R1F12MS4R1F16MS4R1F20MS4R1F25MS4R1M04MS4R1M06MS4R1M08MS4R1M10MS4R1M12MS4R1M16MS4R1M20

Cat. No. PageB.3B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.2B.3B.3B.3B.3B.2B.2B.2B.2B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9B.9

MS4R1M25MS4R1W04MS4R1W06MS4R1W08MS4R1W10MS4R1W12MS4R1W16MS4R1W20MS4R1W25MS4R2F20MS4R2F25MS4R2F32MS4R2F40MS4R2M20MS4R2M25MS4R2M32MS4R2M40MS4R2W20MS4R2W25MS4R2W32MS4R2W40PROCASPROLOKRONCASRONLOK

RONWKEYSCC

ST130ST250ST30ST440ST48ST60TITAN

UV130AUV130DUV250UV30UV440UV48UV60

UVTD130UVTD250UVTD440UVTD48UVTD60

Page 90: Ed. 02 Fanuc - Power Controls... · 2006. 3. 31. · motor operator that is automatically activated after the closing operation. IP43 front panel and door escutcheon seals are standard

Ref

. I/

3135

/E/E

X 1

2.0

Ed.

04/

2002

Cop

yrig

ht G

E P

ower

Con

trol

s 20

02

6808

09

We bring good things to life.

GE Power Controlsin EuropeGE Power Controls

21

03

4

M-P

AC

T

Air Circuit Breakers 400 - 4000AAir Circuit Breakers

GE Power Controls

New

GE POWER CONTROLSExport DepartmentGuldensporenpark 30B-9820 Merelbeke (Gent)Belgium

Tel. +32/9 210 38 11Fax +32/9 210 39 20E-mail: [email protected]

GE POWER CONTROLS Ltd.Hornhouse Lane,Knowsley Business ParkLiverpool L33 7YQUnited Kingdom

Tel. 0151/524 1122Fax 0151/524 6247E-mail: [email protected]

GE Power ControlsNow on the net !

www.gepowercontrols.com

GE Power Controls is the European arm of GE Industrial Systems, one of the ten core businesses of the General Electric Company (USA), known internationally for its positive approach to its customers, its people and the world we all live in.

GE Power Controls is a top class European supplier of low-voltage productsincluding wiring devices, residential and industrial electrical distribution components, general purpose control products, enclosures and switchboards.Most of the global demand for the company's products comes from OEMs,wholesalers, installers and panel-board builders worldwide.

So, these are the facts, now the story behind them. GE Power Controls'name is synonymous with technical expertise, quality of products and services, and the broadness of its range. But this is not enough, in a constantly changing and competitive environment we have to offer all thisand more. Over the next few years our product range will be dramaticallyexpanded and renewed .

The goal we have set for quality ensures no less than constant progress, as part of GE's company-wide Six Sigma product and service excellence initiative. This applies not only to our products and services but also to ourbusiness conduct, where only the highest standards are good enough. We believe that our most important asset is the trust our customers put inus. We earn it by our continuing quest for improvement on every front andour strong commitment to integrity and reliability.

Ed

. 02