ECOUSTIC® CURVE SPECIFICATIONS

ECOUSTIC® CURVE COLOR

Patterns shown are not to scaleProduct may vary in color due to the nature of the mediaPlease refer to website for current color range

ALPACA DEEP ECLIPSECHROME

FLINT HARBOUR HERBGLADE

LOTUS ONYX PUTTYMANGO

QUARRY TITANIUM VIOLETSTEEL

WINE ZEST

unikavaev.com800-237-1625

DESCRIPTION

COMPOSITION

THICKNESS

ROLL SIZE

FIRE RATINGSASTM E84 AS/ISO 9705

ACOUSTICAS/ISO 354

APPLICATION

ORIGIN

IMPORTANT

PLEASE NOTE

ECOUSTIC® CURVE

BENEFITS

Improved Sound Absorption: ecoustic® Curve is ideal for narrowrange frequency absorption and achieves an NRC 0.40 rating whendirectly fixed to a wall.

Flexible + Versatile Substrate: Available only in roll format, ecoustic® Curve is ideal for walls with high ceilings as joins are virtually seamless. The flexible ecoustic® Curve can be used on straight and curved surfaces.

Hook + Loop Receptive Surface: ecoustic® Curve has a pin, staple and hook + loop receptive surface that is ideal for education institutions such as schools, universities, child care centers and libraries.

Designed for the Environment: ecoustic® Curve is made from up to 60% recycled polyester from PET packaging such as beveragebottles. No chemicals, resin binders, ozone depleting substances or water are used during manufacture. Easy to disassemble andseparate into the appropriate recycling systems, ecoustic® Curve can be recycled.

Low VOC + Greentag Level A Certified: ecoustic® Curve is certified low-VOC and certified as Level A to the Greentag standard.

Green Star + LEED: ecoustic® Curve is suitable for Green Starprojects. Up to 60% post consumer content contributes to LEED MR Credit 4 Recycled.

ecoustic® Curve is a next generation acoustic substrate combining quality sound absorption with hook + loop receptivity.

100% PET (up to 60% recycled PET)

.4 - .47” (10 - 12mm)

L: 13 yds or 27 yds, W: 4’(L: 39’ or 81’ W: 48”)

Class BGroup 1

NRC 0.40 (Direct Fix)

Wall and Ceiling (contact adhesive +mechanical fastening required forceilings)

Australia

ecoustic® Curve has a directional nap, therefore the orientation of the nap must be consistent throughout aninstallation to avoid reflectance variation. It is recommended to install ecoustic® Curve vertically. If installingon a ceiling, we advise the use of screws along with adhesive to ensure the panel remains secure.

Variation in fiber mix, color, and other slight surface blemishes are aninherent feature of this product and are unavoidable. Variation from batch to batch may occur

unikavaev.com800-237-1625

ECOUSTIC® CURVE Instructions for ceiling installation (Mechanical Fastening)

1) Using a sharp new blade, cut on a 60° angle into the location for the screw. You will need to cut fully through the felt face of the surface.

2) Tread the screw through the previously cut slit on the surface.

3) Drive the screw past the felt face of the surface so that it sits on the panel core below and fastens to the ceiling structure.

4) This is an example of maximum depth, do NOT drive the screw all the way through the panel. The screw needs to sit as high as it can on the panel core, just below the felt surface.

5) You should be left with a minimal hole, as shown above.

6) Because this hole was cut at an angle of 60° at the start of the process you have essentially created a flap. Pick this flap out to lay over the screw head.

7) With clean hands, smooth over the flap to conceal it.

8) Example of ecoustic® Curve after the screw has been inserted. The screw thread should be neatly concealed by the felt face above it.