ECO-$MART LED Cobra Head · T he LED Cobra Head is your best choice for energy-efficient, ... LED...
5
Cobra Head Lighting – Better Efficiency...Better Illumination... Better Visibility T he LED Cobra Head is your best choice for energy-efficient, environmentally friendly lighting for roads, highways and thoroughfares. LED Cobra Heads use up to 50% less energy than traditional metal halide fixtures and maintain virtually all their luminosity for the 10+ year life of the light, significantly reducing replacement and maintenance costs. And proprietary photometric design techniques minimize glare and improve nighttime visibility to deliver superior illumination and roadway safety. Cobra Heads meet all LEED requirements for light pollution reduction credits by minimizing light trespass, reducing sky-glow, and reducing the impact on nocturnal environments. LED Cobra Heads comply with ANSI requirements for side-mounted horizontal luminaires and mount easily on a 1¼” NPS or 2” NPS arm with ±6° of leveling adjustment. The Cobra Head luminaire is available with an optional IP-66 rating, IESNA Type II light distribution pattern, and polycarbonate or acrylic lens. LED Cobra Heads possess full cut-off and are Dark Sky-friendly. • Highest target efficiency • Uses up to 50 % less energy • Maintenance-free for 10+ years • Environmentally friendly • No light trespass • No light pollution LED Cobra Head ECO-$MART
Transcript of ECO-$MART LED Cobra Head · T he LED Cobra Head is your best choice for energy-efficient, ... LED...
Cobra Head Lighting – Better Efficiency...Better Illumination...Better Visibility
T he LED Cobra Head is your best choice for energy-efficient, environmentally friendly lighting for roads, highways and thoroughfares.
LED Cobra Heads use up to 50% less energy than traditional metal halide fixtures and maintain virtually all their luminosity for the 10+ year life of the light, significantly reducing replacement and maintenance costs. And proprietary photometric design
techniques minimize glare and improve nighttime visibility to deliver superior illumination and roadway safety. Cobra Heads meet all LEED requirements for light pollution reduction credits by minimizing light trespass, reducing sky-glow, and reducing the impact on nocturnal environments. LED Cobra Heads comply with ANSI requirements for side-mounted horizontal luminaires and mount easily on a 1¼” NPS or 2” NPS arm with ±6° of leveling adjustment. The Cobra Head luminaire is available with an optional IP-66 rating, IESNA Type II light distribution pattern, and polycarbonate or acrylic lens. LED Cobra Heads possess full cut-off and are Dark Sky-friendly.
• Highest target efficiency
• Uses up to 50 % less energy
• Maintenance-free for 10+ years
• Environmentally friendly
• No light trespass
• No light pollution
LED Cobra HeadECO-$MART
Features and Benefits:• Full cutoff
• Low glare
• Dark Sky-compliant
• Die-cast housing
• Maximum flexibility - IESNA type II light distribution pattern - Polycarbonate or acrylic lens
For highly efficient, cost-effective, low-maintenance quality illumination, nothing can match LED Cobra Head luminaires.
LEDs, the enabling components of solid-state lighting products, are semiconductors that produce white light more efficiently than most traditional light sources. While the white light and high color rendition of LEDs has made them a good alternative to HID, CFL and incandescent lamps for certain applications, LEDs previously lacked the lumen output and optical control required for general illumination. Recent advances in LED efficiency – and proprietary technology – have changed that, making LEDs an increasingly obvious choice for environmentally friendly, cost-effective, low-maintenance lighting.
27.39 in.
8.5 in.
20.7 in.
7.4 in.
LED Cobra HeadECO-$MARTECO-$MART
TOLL FREE:(888)329-2705 FAX:(941)377-9460 [email protected]
Learn more on-line at:
www.eco-smart.com
* All data subject to change without notice.
LT-DC-SCHDC Version - Small LED Cobra Head Luminaire
Housing: One-piece cast, low copper (<0.4% Cu) aluminum alloy housing with integral slipfitter.
Lens Frame: One-piece cast, low copper (<0.4% Cu) aluminum alloy lens frame. Stainless steel hinges provided for attachment to housing.
Mounting: Mounts easily on 1 1/4” NPS arm (adapter availabe for 2” NPS arm). ±6º of leveling and adjustment.
LED Modules: The LED modules utilize an aluminum metal clad board for maximum heat transfer, thus leading to longer life. The modules consist of various secondary optics allowing direction and intensity of the light to be tightly controlled. Control of the LEDs allow EvoLucia fixtures to maintain light levels equal to or greater than that of MH and HPS fixtures at a much lower energy consumption levels.
LED Driver: The LED driver is a DC input device with a wide input voltage range of 10 to 30 VDC, providing for flexibility in the system voltage. It utilizes a buck-boost circuit to ensure that power is transferred from the input source (typically a battery) to the LEDs in the most efficient manner. Its constant-current output is monitored by intelligent protection circuitry to ensure years of reliable operation.
Finish/Color: Finish is TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness; A.S.T.M. B-119, 2500 hour salt spray test endurance rating. The standard color is Light Gray. Custom colors are available, consult factory.
Listings:Designed and manufactured to UL & C-UL standards for wet locations, rated IP66.
Dark Sky Compliant: Full cut-off
FEATURES:
SPECIFICATIONS:
SPECIFICATIONS CONTINUED:
Usage: Luminaires to illuminate Highways, Freeways, Parkways and Thorough-fares, Local and Collector Roads, Park-ing Areas, Rural Roads, and Intersec-tions
Light Distributions: Available in Type II
Input Wattage: Available in 25, 40 & 60 Watts
Comparable to: 50-100 Watt MH or HPS
Life Expectancy: 50,000+ Hours
Efficacy: Up to 53 Lumens per Watt
Sealed Optics:
Patent:
IP66
Patents Pending
Heatsink/Platform: One-piece cast, low copper (<0.4% Cu) aluminum alloy. Effectively spreads heat to ensure long component life of LEDs and electronic components and provides precise alignment of LEDs and lenses.
Photo Control: Twist lock photo cell receptacle furnished as standard. Photo cell or shorting cap are optionally available.
Lens: Molded Acrylic lens, profiled for maximum trans-mission of light. Optionally available with tempered boro-silicate flat glass lens.
EPA: 0.81 ft2 Height: 7.5”
Weight: 13 lbs Width: 13.4”
Length: 20.7”
PAL - Profiled Acrylic Lens
Eco-$mart, Inc.TOLL FREE:(888)329-2705 FAX:(941)377-9460 [email protected]
May 28, 2010CONTOUR PLOTTEST #: 25 SUN LTL17836 NUM LUMS/ ORIENTATION: 1 lumCATALOG #: DC-SCH-RFK/25-60/PAL/T2/30DC/GE MOUNTING HEIGHT: 18.0'LAMP: BRACKET ARM LENGTH: 3.0'TOTAL LUMENS: 0LLF: 1.00ILLUM. UNITS: FCSCALE: 1 IN= 20.0FT
-60.00
-40.00
-20.00
20.00
40.00
60.00
-60.00 -40.00 -20.00 0.00 20.00 40.00 60.00
Legend: A=0.75 B=0.50 C=0.40 D=0.20 E=0.10
EE
D ED D E
C C ED B C B B C D
E A A BA A
C DAE AB
A BC BBC C BD C
E DD DD
E E EEE
Alera, and Prescolite. Calculations are performed in accordance with IESNA procedures.Columbia, Alera, and Prescolite are not responsible for the light output of lamps and ballasts, or design variables not shown.Generated by LitePro version 2.026, which is provided and supported by Columbia Lighting,
Eco-$mart, Inc.TOLL FREE:(888)329-2705 FAX:(941)377-9460 [email protected]
LED Cobra Head
May 28, 2010CONTOUR PLOTTEST #: LTL18177-25 NUM LUMS/ ORIENTATION: 1 lumCATALOG #: SCH/25-60/PAL/T3/277/LG/XPG MOUNTING HEIGHT: 18.0'LAMP: BRACKET ARM LENGTH: 3.0'TOTAL LUMENS: 0LLF: 1.00ILLUM. UNITS: FCSCALE: 1 IN= 15.0FT
-45.00
-30.00
-15.00
15.00
30.00
45.00
-45.00 -30.00 -15.00 0.00 15.00 30.00 45.00
Legend: A=0.75 B=0.50 C=0.40 D=0.20 E=0.10
EE E
D D ED CB CA B
C DE
A B
C A
DE B
AC
B DB
CE C
DDE D
E E
Alera, and Prescolite. Calculations are performed in accordance with IESNA procedures.Columbia, Alera, and Prescolite are not responsible for the light output of lamps and ballasts, or design variables not shown.Generated by LitePro version 2.026, which is provided and supported by Columbia Lighting,
Eco-$mart, Inc.TOLL FREE:(888)329-2705 FAX:(941)377-9460 [email protected]
LED Cobra Head
