7/31/2019 ECE 5th Yr Projects HW PDF

1/7

Industrial

Electronics

Ece projects

Mendiola, Marie Grace L.

BSECE- 4th

year

5-6 MWF

Engr. Edwin L. Astorga, PECE

7/31/2019 ECE 5th Yr Projects HW PDF

2/7

SMART NET-HEALTH MONITORING

The Smart Net-Health Monitoring is a device designed to monitor vital signs, specifically Blood pressure,

pulse rate and body temperature. It implements wireless technology and taking full advantage of the

wide-spreading Internet to provide a convenient solution to monitor human health.

Elements of Process Control

Controlled or Measured Variable. The monitored outputs of the process are pulse rate, temperature

and blood pressure.

Manipulated Variable. Blood pressure. Temperature and heart rate.

Set Point. The desired value of the output variable is the vital sign of the patient .

Transducer. RF/ data transceiver

Sensor. LM3S Temperature Sensor. The LM35 is an integrated circuit sensor that can be used to

measure temperature with an electrical output proportional to the temperature (in C).

Controller. Microcontroller

Actuator. None.

7/31/2019 ECE 5th Yr Projects HW PDF

3/7

Proponents: Inovejas, Vincent Lobos Adviser: Engr. Rosalie de Ocampo

Natassja, Jane

Nacilla, MilahGail

Teruel, Carl Dawner

7/31/2019 ECE 5th Yr Projects HW PDF

4/7

ELECTREASYTY

BUILDING ADMINISTRATORS PREPAID POWER CONSUMPTION METER THRU WIRELESS BROADBAND

WITH OVERLOAD PROTECTION AND LOAD CONVERSION FOR CALL, TEXT AND INTERNET SERVICES

The electrEASYty, Building Administrators Prepaid Power Meter thru Wireless Broadband with OverloadProtection and Load Conversion for Call, Text and Internet Services, is a modification of the existing

prepaid power meter. The project offers more services other than providing prepaid power such as load

conversion for call, text and internet services.

It uses wireless broadband for data acquisition and for more reliable power consumption monitoring. It

also uses GSM module to provide the call, text and internet services. A webpage and database is

provided for references.

Elements of Process Control

Controlled or Measured Variable. The monitored output of the process is electricity.

Manipulated Variable. Power load.

Set Point. The desired value of the output variable is the electricity consumption of the tenants.

Transducer. None.

Sensor. None.

Controller. PIC 16F877A. The 16F877A is one of the most popular PIC microcontrollers and it's easy tosee why - it comes in a 40 pin DIP pinout and it has many internal peripherals.

Actuator. None.

7/31/2019 ECE 5th Yr Projects HW PDF

5/7

Proponents: Carlos, Janine M. Adviser: Engr. Alain Bernard C. Raola

Mauricio, Jorge Resley R.

Rico, Charmaine C.

Rosales, Maryjoy E.

7/31/2019 ECE 5th Yr Projects HW PDF

6/7

DEVELOPMENT OF WIRELESS MONITORING DEVICE FOR PERSONS WITH

BRADYPNEA OR TACHYPNEA

This wireless monitoring device count breath rate of a person within one minute and determine if thebreath rate is normal or abnormal by data acquisition using database system and visual basic program. If

the breath rate is abnormal, it will determine if it is bradypnea which has a slow breathing lower than

twelve and tachypnea which fast breathing higher than twenty.

Elements of Process Control

Controlled or Measured Variable. The monitored output of the process is the breathing.

Manipulated Variable. Ailment and preclusion if the breath rate is above or below its normal level.

Set Point. The desired value of the output variable is the rate of breath per minute of the patient.

Transducer. Pressure sensor.

Sensor. Pressure sensor (same with transducer).

Controller. Microcontroller and keyboard.

Actuator. MCU.

Block Diagram

7/31/2019 ECE 5th Yr Projects HW PDF

7/7

Proponents: Cadao, Francis Kent P. Adviser: Engr. Edwin Astorga, PECE

Dionela, Neil Allen N.

Fabricante, Joanna Joyce C.

Lagsac, RodenM.