EC2 SERIES UNIVERSAL PLC
Transcript of EC2 SERIES UNIVERSAL PLC
Programmable universal controller
AMBIENT TEMPERATURE CONTROL
AIR HANDLING UNITS
Building EnergyManagement Systems
DATA ANALYSIS
The world ofuniversal andprogrammable
ec2 systems
The new universal controller of the EC2 series represents an impor-tant element for the development of BMS systems.Suitable for control and manage-ment of all parameters in HVAC and technological systems. The flexibility of the multi controller and complete programming free-dom creates solutions dedicated to customer requests, meeting the principles of simplicity, functiona-lity and total autonomy for the operators.
ENERGY MANAGEMENT
WATER MANAGEMENT
ENERGY DASHBOARD
HOME AUTOMATION
SERVIC
E FLEXIBILITY AUTONOM
Y S
ER
VIC
E F
LE
XIB
ILITY AUTONOMY SERVICE FLEXIB
ILIT
Y
AU
TO
NO
MY
MODELS OF univErSaL COnTrOLLEr
Programming freedomElectronic Technologies Universal controller
CODE DESCRIPTION POWER SUPPLYOUTPUTS INPUTS
relay 0-10V universal digital
YLP 12114/8 Programmable universal controller
24 / 230 Vac 11 4 8 5
YLP 1284/8 Programmable universal controller
24 / 230 Vac 8 4 8 5
YLP 1254/8 Programmable universal controller
24 / 230 Vac 5 4 8 5
TECHNICAL DATA
Power supply voltage:
• 24 Vac ±15% 50-60Hz or
• 230 Vac ±15% 50-60Hz (safety extra-low voltage SELV)
Consumption:
• 13VA (with no expander connected);
• 21VA (with expanders connected).
Real time clock:
• Charge reserve with very high capacity or lithium
battery (*);
Universal inputs:
• Passive sensors (NTC1k, NTC10k, PT1000, Ni1000,
Resistor);
• Active sensors (0-10V, 4-20mA* );
• On/off clean contact sensors;
Digital inputs:
• On/off or pulse sensors with a maximum counting
frequency of 50 Hz
Analoug outputs:
• 0-10V.
Digital outputs:
• Relays, 2 of which with switching contact (the
remaining with NO contact);
Communication interfaces:
• RS485 with ModBus protocol for display and sensors /
expanders;
• CAN Bus with CANopen protocol for communication
between controllers;
Removable display module:
• DGR624 - alphanumeric 128 x 64 LCD
display with led backlighting.
• USB OTG Port for firmware updates and
applications
Telemanagement/communication interface:
• Using a separate communication plug-in with
Ethernet and the support of C-Bus, KNX,
LON and BACnet;
Terminal blocks
• removable.
Degree of protection:
• IP20 EN60529;
• use with devices with safety class II.
MECHANICAL DIMENsIoNs (H x W x D)
(including the display module):
• 110 x 210 x 74.
Environmental conditions:
• Operating temperature 0 to +55° with max.
95% relative humidity, non-condensing;
• Temperature for transport and storage -20 to
+75° C with max. 95% relative humidity non-
condensing.
(*) not included in standard configuration
aCCESSOriES
SEnSOrS
CODE DESCRIPTION
sTA 010 Temperature sensor NTC10K 0-100° for air ducts IP54
sTA 001 Outdoor temperature sensor NTC1K -40 °C/+40 °C for air ducts IP54
sAF 010 Wire temperature sensor NTC10K 0-100 °C for immersion IP54
sAB 010 Room temperature sensor NTC10K 0-40°c, IP30
sAA 010 Room temperature sensor NTC10K 0-40°c, IP54
sAA 001 Outdoor temperature sensor NTC1K -40°c/+40°c wall-mounted IP54
sAE 001 Outdoor temperature sensor NTC1K -40°c/+40°c wall-mounted IP54
sAF 001 Wire temperature sensor NTC1K -40°c/+40°c for immersion IP54
sUR 704 Relative humidity senso 0-10V 0-100% for air ducts IP55
sUT 714 Relative humidity sensor 0-10V 0-100% and room temperature sensor NTC10K 0-60 °C for air ducts IP55
sAU 914 Relative humidity sensor 0-10V 0-100% and room temperature sensor NTC10K 0-40 °C, wall-mounted IP42
sAU 724 Relative humidity sensor 0-10V 0-100% and room temperature sensor NTC10K 0-40 °C, wall-mounted IP55
sQC 954 Ambient air quality sensor IP42
sQs 954 Air quality sensor for air ducts IP54
sDA 701 Air differential pressure sensor (0÷1mbar) IP54
sDA 703 Air differential pressure sensor (0÷3mbar) IP54
sDA 705 Air differential pressure sensor (0÷5mbar) IP54
sDA 730 Air differential pressure sensor (0÷30mbar) IP54
i/O EXPanDErS
ARTICLE DIN modules AI DI AO DO
PEC460 4 - 6 - -
PEU430 4 4 - 2 3
The maximum number of connectable expanders will be 4 (2 for each expander type).Types of available expanders
Universal inputs accept the following sensors
Electronic Technologies
CODE DESCRIPTION
DGR624 Removable display
ACB121CSupervision Plug-inETHERNET+Cbus
ACB121KSupervision Plug-inETHERNET+Konnex (*)
ACB121LSupervision Plug-inETHERNET+LON (*)
ACB121BSupervision Plug-in ETHERNET+BACNET/MSTP (*)
(*) available on request
COSTER
2014
ver
sion
e 00
D31
128
agen
ziaz
elas
chi.i
t
made in Italy
Head Office and Salesvia San G.B. De La Salle, 4/a 20132 MilanoTel. +39 02 2722121 Fax +39 02 [email protected] [email protected]
Branch in UKCOSTER T.E. UK BRANCH5 Shaftesbury Street South, Sir Francis Ley Industrial Park - Derby DE23 8YHTel. +44 (0) 1332 200555 Fax +44 (0) 1332 [email protected]
COSTER TECNOLOGIE ELETTRONICHE S.p.A.