Machine Guarding24/7 Security

Machine Guarding Applications

Robotic Guards for Robotic Equipment Protection - 4

Machine Guard Work and Test Area Partition - 5

Machine Guards for Conveyor Protection - 6

Machine Guard Industrial Partition - 8

Sheet Metal Welding Cell Partition - 9

Conveyor Perimeter Protection Guardrail - 10

QuickShip Machine Guarding - 11

Th nk it™

We can build it

Machine Guarding24/7 Security

Robotic GuardsRobotic Equipment Protection

Cogan robotic machine guards protect your per-sonnel and equipment from accidents associ-ated with moving machinery. Ideally suited for guarding robotic and automated equipment, our modular machine guards are engineered to help you set up a protected area quickly and easily. Cogan robotic machine guards boast a sturdy, all-steel construction, are wear-resistant and maintenance-free. Available in our powder-coat-ed midnight black and safety yellow paint finish.

Protect your employees when operating or working near ro-botics equipment with Cogan robotic machine guards.

4

Machine GuardWork & Test Area Partition

Keep volatile or high-pressure work and test ar-eas safely enclosed with a sheet metal and Lex-an machine guard partition. Sturdy corrugated steel sheets help to contain sparks, spray and other spatter, while Lexan panels allow for clear visibility and light penetration. Special 4” sweep provides extra clearance for moving parts and electrical wires. Optional mezzanine integration creates a load bearing roof for any equipment that must be accessed from above the work area.

Secure hazardous work zones and high-temperature testareas with a sheet metal & Lexan machine guard partition.

5

Machine GuardConveyor Protection

need for proper safeguarding is more import-ant than ever before. Cogan conveyor machine guards serve to seperate conveyors and other moving machinery from warehouse traffic. The fully-framed partition system allows access to equipment only where necessary. This creates clearly defined work areas and safe walkways for pedestrians circulation. Available in our midnight black and safety yellow powder-coated paint fin-ish for maximum visibility and wear-resistance.

In today’s world, where automation has become essential to manufacturing and distribution, the

Secure and separate conveyor systems and moving machin-ery from warehouse traffic with Cogan conveyor machine guards.

6

Cogan products are built to last

Our promise is for life

Machine GuardIndustrial Partition

industrial manufacturing. Moving machine parts, robotics and other mechanical equipment have the potential to inflict serious harm on your em-ployees. Install Cogan machine guards and put an end to preventable injuries. Built from heavy-duty 2”x2”x10GA framed welded wire mesh, our machine guards create a secure barrier between your workers and your equipment. The ultra-re-silient design means machine guards are strong enough to withstand forklift collisions.Cogan machine guard partitions offer protection

against occupational hazards associated with

Heavy-duty protection to keep your process running smooth-ly. Install an industrial machine guard partition and put an end to preventable injuries.

8

Sheet MetalWelding Cell Partition

Keep your employees safe from moving machin-ery, robotics equipment and welding zones with Cogan sheet metal partitions. Our sheet metal partitions offer the same trusted protection as our wire mesh enclosures, but with the added benefit of complete privacy. Made from heavy-du-ty corrugated steel panels framed in 1 ¼” x 1 ¼” x 12GA structural angle, sheet metal partitions are an excellent way to divide and secure large areas in your plant, warehouse or office building.

Segregate automated machin-ery, enclose welding areas and guard robotics equipment with Cogan sheet metal partitions.

9

Conveyor PerimeterProtection Guardrail

installed – engineered to withstand a 10,000-lb impact at 4 mph. That means the equipment on your shop floor will be protected from traffic ac-cidents and other hazards. Use Cogan heavy-du-ty guardrails to safeguard machinery, conveyors, rack-aisle-ends, inventory areas, and loading docks. Our guardrail barriers work equally well protecting mezzanines, offices, walls, heating and cooling equipment, and computer control centers. Built from the best quality materials, our guard-

rails are strong, adaptable and – when properly

Trouble-free for your peace of mind. Install a Cogan heavy-du-ty guardrail system and create a protective shield between your workers and your equipment.

10

QuickShipIn Stock. Ready To Ship.or Accelerated Delivery.

Cogan QuickShip is all about you – your needs, your budget, your timeline. No waiting. No delays. Cogan QuickShip is on time, all the time.

MACHINE GUARDING

Panels & PostsItem Description Item #A. PanelsRobotic Machine Guarding Panel 10”W x 7’-2”H QS-PAN1086Robotic Machine Guarding Panel 1’-0”W x 7’-2”H QS-PAN1286Robotic Machine Guarding Panel 1’-6”W x 7’-2”H QS-PAN1886Robotic Machine Guarding Panel 2’-0”W x 7’-2”H QS-PAN2486Robotic Machine Guarding Panel 2’-6”W x 7’-2”H QS-PAN3086Robotic Machine Guarding Panel 3’-0”W x 7’-2”H QS-PAN3686Robotic Machine Guarding Panel 3’-6”W x 7’-2”H QS-PAN4286Robotic Machine Guarding Panel 4’-0”W x 7’-2”H QS-PAN4886Robotic Machine Guarding Panel 4’-8”W x 7’-2”H QS-PAN5686Robotic Machine Guarding Panel 5’-0”W x 7’-2”H QS-PAN6086B. PostsRobotic Machine Guarding 4-Way Post QS-P90Floor Anchors 3/8” x 2 3/4” (4x/pkg) QS-FAEF12

7’-2”H

4”sweep

90”H

6”

6”

Baseplate

Posts are punched on all 4 sides to be used as line or corner posts.

Single Swing DoorItem Description Item #Robotic Machine Guarding Single Hinge QS-Porte3684Door 3’W x 7’-2”H (transom tube included)

* Lock interlock available upon request

Door width

4”sweep

7’-6”H

SPECIFICATIONS2” x 1” x 10GA welded wire mesh doors framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded ø1/2” reinforcement rods.All Robotic machine guarding doors are equipped with a padlock hasp and hinges.

MATERIAL REQUIRED FOR STANDARD 3-WALL SYSTEM4x: 5’0” x 7’2” panel 2x: 4’0” x 7’2” panel 9x: 7’6” post1x: 1’0” x 7’2” panel 1x: 3’0” x 7’2” door (transom tube included)

swing door

1’ 3’ 4’ 4’

13’-2” overall dimension

5’5’

10’-1

0” o

vera

ll di

men

sion

7’-6”H

1’ 3’ 4’ 4’

Layout Example(Plan View)

Layout Example(Elevation View)

FINISHPanels & Doors PostsPowder-coated Powder-coatedmidnight black safety yellow

SPECIFICATIONS2” x 1” x 10GA welded wire mesh panels framed in1 1/4 x 1 1/4” x 12GA structural angle with one welded ø1/2” reinforcement rod.2 “ x 2” seam welded square tube posts welded to 6” x 6” baseplate / 4” sweepMachine guarding protects your personnel from the potential hazard of operating or working near moving machinery. Sturdy all-steel construction is wear-resistant and maintenance-free. Modular nut-and-bolt assembly. IN STOCK.

QuickShipIn Stock. Ready to Ship

Framed 2” x 1” x 10GAwelded wire mesh

12

HE AVY-DUTY GUARDRAILSItem Description Item #A. Rails2’ Rail (19” exact length) QS-GR23’ Rail (31” exact length) QS-GR34’ Rail (43” exact length) QS-GR45’ Rail (55” exact length) QS-GR56’ Rail (67” exact length) QS-GR67’ Rail (79” exact length) QS-GR78’ Rail (91” exact length) QS-GR89’ Rail (103” exact length) QS-GR910’ Rail (115” exact length) QS-GR10B. Columns & Accessories Double Rail Column (centered baseplate) QS-GPDCDouble Rail Column (offset baseplate) QS-GPDOSingle Rail Column (centered baeplate) QS-GPSCSingle Rail Column (offset baseplate) QS-GPSOLift-Out Brackets (pair) QS-GL15/8” x 4 1/2” Floor Anchors (4x/pkg) QS-GFA5

MATERIAL FOR THIS DOUBLE RAIL GUARDRAIL SYSTEM4x: Double rail column (centered baseplate)1x: Double rail column (offset baseplate)4x: 10’ rail2x: 3’ rail2x: 2’ rail

10’-0” C/C dimension 10’-0” C/C dimension 2’-0” C/Cdimension

OVERALL DIMENSION (incl. baseplates) 22’-10”

3’-0

” C/C

dim

ensi

on

O.D.

(inc

l. ba

sepl

ates

)3’

-7 1

/2”

FINISHPowder-coated safety yellow

QuickShipIn Stock. Ready to Ship

13

Rail

Double RailColumn

Single RailColumn

44”

18”

CenteredBaseplate

OffsetBaseplate

Lift-outBracket

12”

SPECIFICATIONS12-gauge steel / unassembled componentsAbsorbs impact of a 10,000 lb load at 4 mph. 12-gauge roll-formed steel, 12” high profile, 3/16” thick end plates punched with two ø9/16” connection holes. 5“ x 5” seam welded square columns welded to a 10” x 10” x 1/2” baseplate with ø3/4” mounting holes. Black plastic post caps. Install with floor anchors (sold separately). IN STOCK.

Layout Example(Plan View)

Cogan Wire & Metal Products Ltd.

Phone (800) 567.2642Fax (800) 633.3004info@cogan.comwww.cogan.com

Standard ColorsStandard colors are applied to all products and are automatically included in the material price on your quote. Unless otherwise specified, all standard colors are powder-coated for a durable, long-lasting and maintenance-free paint finish.

Premium ColorsPremium colors are available at an additional cost. If you are interested in a premium color, please contact your Cogan Account Manager for pricing and availability.

Steel Blue

Forest Green

Deep Sea Blue

Hot-Dipped Galvanized

Midnight Black

Burnt Orange

Sandy Beige

Crisp White

Ruby Red

Safety Yellow

Machine Guarding

Midnight Black

Safety Yellow

Guardrails

Safety Yellow