Ebora Process Automation - Aliaxis 206.pdf · 2014. 11. 25. · Ebora Process Automation Customer...
1
Ebora Process Automation Customer information Customer Name TPU Services B.V. Customer Address Uyterschootweg 18, 4338 PN Middelburg Installation date 2006 Brief Company Profile • TPU Services b.v. designs, manufactures and maintains dosing systems, for dosing and mixing chemicals with water or other media • Each dosing system is client-specific: the system is fully adapted to the required application requirements. Company main business, market, customers Suppliers of chemicals in general Company most important customers Nalco Country NETHERLANDS Installation information Activity field Process industry Specific Segment or Area The FLOWX3 flowsensor F3.00.H13 connected to the monitor/transmitter F9.02.P1 is the feedback to the little controller that sends the outputsignal for the solenoid controlvalve. Installation Description For accurate dosing they made a flow-system with a steady, controlable flow. Pipe material and dimension PVC DN15 Intrumentation requirements The flow instruments have to measure the flow and have to transmit an analog signal to the controller. A display for the actual flow was also desired. Instruments installed This application is a test and will be introduced soon in the market. Instrument functions A display is desired because of the previous installation where they could see the flow on the rotameter. Replacement of.. Rotameter, see picture Advantages, cost saving, production improvements This system gives a better grip on the chamical dosing. Chemecals can be very expensive, so the better the grip, the less waste. FIP S.p.A. - FLS Division Loc. Pian di Parata 16015 Casella (GE) - Italy - Tel. +39 010 96211 - Fax +39 010 9621209
Transcript of Ebora Process Automation - Aliaxis 206.pdf · 2014. 11. 25. · Ebora Process Automation Customer...
-
Ebora Process Automation
Customer information
Customer NameTPU Services B.V.
Customer AddressUyterschootweg 18, 4338 PN Middelburg
Installation date2006
Brief Company Profile• TPU Services b.v. designs, manufactures andmaintains dosing systems, for dosing and mixingchemicals with water or other media • Each dosing system is client-specific: the systemis fully adapted to the required applicationrequirements.
Company main business, market,customersSuppliers of chemicals in general
Company most important customersNalco
CountryNETHERLANDS
Installation information
Activity fieldProcess industry
Specific Segment or AreaThe FLOWX3 flowsensor F3.00.H13connected to the monitor/transmitterF9.02.P1 is the feedback to the littlecontroller that sends the outputsignal forthe solenoid controlvalve.
Installation DescriptionFor accurate dosing they made aflow-system with a steady, controlable flow.
Pipe material and dimensionPVC DN15
Intrumentation requirementsThe flow instruments have to measure theflow and have to transmit an analog signalto the controller. A display for the actualflow was also desired.
Instruments installedThis application is a test and will beintroduced soon in the market.
Instrument functionsA display is desired because of theprevious installation where they could seethe flow on the rotameter.
Replacement of..Rotameter, see picture
Advantages, cost saving,production improvementsThis system gives a better grip on thechamical dosing. Chemecals can be veryexpensive, so the better the grip, the lesswaste.
FIP S.p.A. - FLS DivisionLoc. Pian di Parata 16015 Casella (GE) - Italy - Tel. +39 010 96211 - Fax +39 010 9621209
