Eaton pll_2141
Transcript of Eaton pll_2141
-
7/25/2019 Eaton pll_2141
1/174
-
7/25/2019 Eaton pll_2141
2/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-2.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Valve Locator
Functional Symbol Flow TypicalModel Cavity Rating Pressure Page
Manual rotary valve L/min (USgpm) bar (psi)
MRV3-10 C-10-3 23 (6) 210 (3000) D-100
MRV13-10 C-10-3 23 (6) 350 (5000) D-110
MRV13-12 C-12-3 46 (12) 350 (5000) D-120
MRV3-16 C-16-3 64 (17) 210 (3000) D-130
MRV13-16 C-16-3 64 (17) 350 (5000) D-140
Flow TypicalModel Cavity Rating Pressure Page
Manual rotary valve L/min (USgpm) bar (psi)
MRV4-10 C-10-4 11 (3) 210 (3000) D-150
MRV14-10 C-10-4 11 (3) 350 (5000) D-160
MRV14-12 C-12-4 23 (6) 350 (5000) D-170
MRV4-16 C-16-4 45 (12) 210 (3000) D-180
MRV14-16 C-16-4 45 (12) 350 (5000) D-190
Flow TypicalModel Cavity Rating Pressure Page
Manual rotary valve L/min (USgpm) bar (psi)
MRV5-10 C-10-4 11 (3) 210 (3000) D-200
MRV15-10 C-10-4 11 (3) 350 (5000) D-210
MRV15-12 C-12-4 23 (6) 350 (5000) D-220
MRV5-16 C-16-4 45 (12) 210 (3000) D-230
MRV15-16 C-16-4 45 (12) 350 (5000) D-240
Flow TypicalModel Cavity Rating Pressure Page
Manual rotary valve L/min (USgpm) bar (psi)
MRV6-10 C-10-4 11 (3) 210 (3000) D-250
MRV6-16 C-16-4 11 (3) 300 (5000) D-256Flow Typical
Model Cavity Rating Pressure Page
Manual rotary valve L/min (USgpm) bar (psi)
MRV7-10 C-10-4 11 (3) 210 (3000) D-260
Flow TypicalModel Cavity Rating Pressure Page
Manual lever valve, spool L/min (USgpm) bar (psi)
MLV9-12-A C-12-4 60 (13.9) 210 (3000) D-292
Flow Typical
Model Cavity Rating Pressure Page
Manual lever valve, spool L/min (USgpm) bar (psi)
MLV9-12-B C-12-4 60 (15.9) 210 (3000) D-293
Flow Typical
Model Cavity Rating Pressure Page
Manual lever valve, spool L/min (USgpm) bar (psi)
MLV9-12-E C-12-4 60 (15.9) 210 (3000) D-294
Flow Typical
Model Cavity Rating Pressure Page
Manual lever valve, spool L/min (USgpm) bar (psi)
MLV9-12-F C-12-4 60 (15.9) 210 (3000) D-295
1
23
1
23
3
4
1
2
3
4
1
2
3
4
1
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
4 2
3 1
.B
.B
-
7/25/2019 Eaton pll_2141
3/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-3.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Directional ControlsValve locator
Functional Symbol Flow TypicalModel Cavity Rating Pressure Page
Check MO L/min (USgpm) bar (psi)
3CP2 A879 5.5-15 (1.4-4) 210 (3000) D-320
Flow Typical
Model Cavity Rating Pressure Page
Manual pull valve, NC L/min (USgpm) bar (psi)
MPV1-10 C-10-2 45 (12) 210 (3000) D-330
MPV3-10 C-10-2 45 (12) 210 (3000) D-340
Flow TypicalModel Cavity Rating Pressure Page
Manual push valve L/min (USgpm) bar (psi)
MSV1-12 C-12-3 41.8 (11) 210 (3000) D-350
MSV11-10 C-10-3 23 (6) 350 (5000) D-360
MSV11-12 C-12-3 30 (8) 350 (5000) D-370
MSV12-12 C-12-3 38 (10) 350 (5000) D-390
Flow TypicalModel Cavity Rating Pressure Page
Manual push valve L/min (USgpm) bar (psi)
MSV2-12 C-12-3 38 (10) 210 (3000) D-380
Flow TypicalModel Cavity Rating Pressure Page
Manual push valve L/min (USgpm) bar (psi)
MSV5-12 C-12-3 41.8 (11) 210 (3000) D-400
MSV15-12 C-12-3 41.8 (11) 350 (5000) D-410
Flow TypicalModel Cavity Rating Pressure Page
Manual push valve L/min (USgpm) bar (psi)
MSV3-12 C-12-4 53.2 (14) 210 (3000) D-420
MSV13-12 C-12-4 53.2 (14) 350 (5000) D-430
Flow TypicalModel Cavity Rating Pressure Page
Manual push valve L/min (USgpm) bar (psi)
MSV4-12 C-12-4 53.2 (14) 210 (3000) D-440
MSV14-12 C-12-4 53.2 (14) 350 (5000) D-450
Flow TypicalModel Cavity Rating Pressure Page
Manual push valve L/min (USgpm) bar (psi)
MSV6-12 C-12-4 53.2 (14) 210 (3000) D-460
MSV16-12 C-12-4 53.2 (14) 350 (5000) D-470
Flow TypicalModel Cavity Rating Pressure Page
Manual push valve L/min (USgpm) bar (psi)
MSV17-10 C-12-4 20 (5.3) 350 (5000) D-480
MSV7-12 C-12-4 45 (11.9) 210 (3000) D-490
MSV17-12 C-12-4 20 (5) 350 (5000) D-500
2
1
2
1
1
2
3
1
2
3
4
1
4
3
2
1
2
3
4
1
2
3
1
2
3
1
2
3
4
-
7/25/2019 Eaton pll_2141
4/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-4.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Directional ControlsValve locator
Functional Symbol Flow TypicalModel Cavity Rating Pressure Page
Pilot to shift 2/2 valve L/min (USgpm) bar (psi)
PTS7-10 C-10-3 30 (8) 210 (3000) D-510
PTS17-10 C-10-3 30 (8) 350 (5000) D-520
PTS17-12 C-12-3 114 (30) 350 (5000) D-530
Flow TypicalModel Cavity Rating Pressure Page
Pilot to shift 2/2 valve L/min (USgpm) bar (psi)
1RDS702 A21145 80 (20) 420 (6090) D-560
Flow TypicalModel Cavity Rating Pressure Page
Brake sequence L/min (USgpm) bar (psi)
1SB10 A893 10 (2.5) 350 (5000) D-540
Flow TypicalModel Cavity Rating Pressure Page
Brake release shuttle L/min (USgpm) bar (psi)
1SB304 A5302 30 (8) 350 (5000) D-550
Flow TypicalModel Cavity Rating Pressure Page
Pilot to shift valve L/min (USgpm) bar (psi)
PTS1-10 C-10-4 30 (8) 210 (3000) D-570
PTS11-12 C-12-4 76 (20) 350 (5000) D-580
PTS11-10 C-10-4 30 (8) 350 (5000) D-590
PTS1-16 C-16-4 132 (35) 210 (3000) D-600
PTS11-16 C-16-4 132 (35) 350 (5000) D-610
PTS1-20 C-20-4 265 (70) 210 (3000) D-620
Flow Typical
Model Cavity Rating Pressure Page
Pilot to shift valve L/min (USgpm) bar (psi)PTS12-10 C-10-4 30 (8) 350 (5000) D-630
PTS12-12 C-12-4 114 (30) 350 (5000) D-640
PTS2-16 C-16-4 132 (35) 210 (3000) D-650
PTS12-16 C-16-4 132 (35) 350 (5000) D-660
PTS2-20 C-20-4 265 (70) 210 (3000) D-670
2
3
1
21 4
2
3
1 4
3
2
1
3
2
1 4
2
3
1 4
-
7/25/2019 Eaton pll_2141
5/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-5.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Directional ControlsValve locator
Functional Symbol Flow TypicalModel Cavity Rating Pressure Page
Pilot to shift valve L/min (USgpm) bar (psi)
PTS13-10 C-10-4 30 (8) 350 (5000) D-680
PTS13-12 C-12-4 114 (30) 350 (5000) D-690
PTS3-16 C-16-4 132 (35) 210 (3000) D-700
PTS13-16 C-16-4 132 (35) 350 (5000) D-710
PTS3-20 C-20-4 265 (70) 210 (3000) D-720
PTS6-16 C-16-4 132 (35) 210 (3000) D-790
PTS16-16 C-16-4 132 (35) 350 (5000) D-800
Flow TypicalModel Cavity Rating Pressure Page
Pilot to shift valve L/min (USgpm) bar (psi)
PTS14-12 C-12-4 114 (30) 350 (5000) D-730
PTS14-16 C-16-4 132 (35) 350 (5000) D-740PTS5-16 C-16-4 132 (35) 210 (3000) D-770
PTS15-16 C-16-4 132 (35) 350 (5000) D-780
Flow Typical
Model Cavity Rating Pressure Page
Pilot to shift valve L/min (USgpm) bar (psi)
PTS5-10 C-10-3 11 (3) 210 (3000) D-750
PTS5-12 C-12-3 105 (28) 350 (5000) D-760
Flow TypicalModel Cavity Rating Pressure Page
Pilot to shift valve L/min (USgpm) bar (psi)
PTS9-8 C-8-5S 19 (5) 280 (4000) D-810
PTS9-10 C-10-5S 38 (10) 280 (4000) D-820
PTS9-12 C-12-5S 76 (20) 280 (4000) D-830
PTS9-16 C-16-5S 151 (40) 280 (4000) D-840
PTS9-20 C-20-5S 230 (60) 280 (4000) D-850
Flow Typical
Model Cavity Rating Pressure Page
Hot oil shuttle L/min (USgpm) bar (psi)
1HSH20 CVB-22-06-0 20 (5) 350 (5000) D-856
2
3
1 4
2
3
1 4
3
2
4 1
2
3
1 4 5
1
2
3
.B
-
7/25/2019 Eaton pll_2141
6/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-6.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
This section gives the basicspecifications for the completeline of Eaton's IntegratedHydraulics threaded cartridgenon-solenoid directional controlvalves. Its purpose is toprovide a quick, convenient
reference tool when choosingVickers cartridge valves ordesigning a system usingthese components.
Two pressure ratings areshown for all products featuredin this catalog typicalapplication pressure andfatigue pressure. The typicalapplication pressure rating isthe maximum recommended
operating pressure for thevalve in a given system. Thefatigue pressure rating is thepressure for the valve tobe free for infinite life frommetal fatigue.
Features and Benefits
Products in this catalog havebeen fatigue tested for onemillion cycles at 132% or 10million cycles at 115% ofrated pressure.
All operating parts arehardened steel, ground andhoned for long life and lowleakage.
Designed for maximumflexibility and minimal spacerequirements.
All exposed cartridgesurfaces are zinc dichromateplated to resist corrosion.
Features and Benefits
All aluminum manifolds aregold anodized to resistcorrosion.
Desired settings maybe locked down.
Aluminum knob and cap
options are available onsome models.
Reliable, economicaland compact.
WARNING
For pressure over210 bar (3000 psi)
use steel housing.
Directional ControlsIntroduction
Directional ControlsValve locator
Functional Symbol Flow TypicalModel Cavity Rating Pressure Page
Sequence L/min (USgpm) bar (psi)
DSV4-10 C-10-4 26 (6.9) 350 (5000) D-860
DSV4-12 C-12-4 113 (29.9) 350 (5000) D-866
DSV4-16 C-16-4 190 (50) 350 (5000) D-868
Flow TypicalModel Cavity Rating Pressure Page
Hot oil shuttle L/min (USgpm) bar (psi)
IHSH701 A21145 80 (21) 420 (6000) D-870
Flow TypicalModel Cavity Rating Pressure Page
Pilot to shift valve L/min (USgpm) bar (psi)
PTS6-10 C-10-4 23 (6) 210 (3000) D-880
PTS16-10 C-10-4 23 (6) 350 (5000) D-890
PTS16-12 C-12-4 76 (20) 350 (5000) D-900
3
4
5 1
2
4
3
2
1
2
3
4
.B
-
7/25/2019 Eaton pll_2141
7/174
-
7/25/2019 Eaton pll_2141
8/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-100.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 US gpm)
Temperature range -40C to 120C (-40 to 248F)
Manual operators D - Lever (3-position detent)* D2 - Lever (2-position detent)*
E - Ball (3-position detent)*
E2 - Ball (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-10-3
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,22 kg (0.4 lbs)
Seal kit 565804 (Buna-N), 889599 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV3-10- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 210 bar (3000 psi)
Description
This is a 3 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. Can be used as a
diverter or a dump valve
Operation
This valve will direct flowbetween ports 1 and 3 andblock port 2 in one position.
Performance Data
Sectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90,flow will be directed betweenports 1 and 2 and port 3 will
be blocked. During cross-overtransition, all ports are blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
MRV3-10(V)-D/E
3 position models
MRV3-10(V)-D2/2E
2 position models
1
23
1
23
0 10 20
0 2 4 6
2
0
4
6
0
20
40
60
80
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
3
2
1
-
7/25/2019 Eaton pll_2141
9/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-101.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV3-10- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 210 bar (3000 psi)
Model Code
1 Function
MRV3- Manual rotaryvalve 4-way
2 Size
10 - 10 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operator
O - No operatorD - Level (3-position detent)D2 - Level (2-position detent)E - Ball (3-position detent)E2 - Ball (2-position detent)K - Knob (2-position, no detent)
Code Port Size Housing Number
Aluminum SteelFatigue Rated
0 Cartridge
A3B 3/8" BSPP 02-173358*
A6T SAE 6 5566162*
A2G 1/4" BSPP 876705
A3G 3/8" BSPP 876714
A6H SAE 6 876704
A8H SAE 8 876711
S2G 1/4" BSPP 02-175127S3G 3/8" SAE 02-175128
S6T SAE 6 02-175124
S8T SAE 8 02-175125
See section J for housing details.
* Aluminum light duty.
5 Port Size 6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV3 10 (V) ** *** 00
Dimensions
mm (inch)
Torque cartridge inaluminum housing
47-54 Nm (35-40 ft. lbs)
75,4(2.97)
34,8(1.37)
25,4(1.00)
24,6(.97)
18,8(.74)
57.2(2.25)
75.4
(2.97)
57.15(2.250)
9.5(0.38)
2X7,14(0.281)
1
2
3
50(1.97)
1/4-20 UNC-2A
SS - 316 stainless steel
external components(only available for "0" and "F"options).
Installation Drawing (Aluminum)Cartridge Only
42,0(1.65)
90
15,80 (0.622)1
3
2
0.875" -14 T
25,4 (1.0) Hex
17,40 (0.685)
9,5 (0.37)
37,0
(1.45)
46,0
(1.81)
-
7/25/2019 Eaton pll_2141
10/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-110.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
2
K TYPE OPTION
1
3
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Temperature range -40 to 120C (-40 to 248F)
Manual operators D- Lever (3-position detent)*D2 - Lever (2-position detent)*
E - Ball (3-position detent)*E2- Ball (2-position detent)*
K- Knob (2-position, no detent)
Cavity C-l0-3
Fluids All general purpose hydraulic fluids such asMIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0,22 kg (0.48 Ibs)
Seal kit 565804 (Buna-N), 889599 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV13-10- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 3 way2 or 3 position manual semi-
rotary directional control valve.Can be used as a diverter or adump valve
Operation
This valve will direct flowbetween ports 1 and 3 andblock port 2 in one position.
Performance Data
Sectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90,flow will be directed betweenports 1 and 2 and port 3 will
be blocked. During cross-overtransition, all ports are blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
MRV13-10(V)-D/E
3 position models
MRV13-10(V)-D2/2E
2 position models
1
23
1
23
20
40
60
80
0
6
4
2
0 5 10
0 2 4 6
A
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
PressureD
rop
-psi
PressureD
rop
-bar
-
7/25/2019 Eaton pll_2141
11/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-111.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV13 10 (V) ** *** 00
1 2 3 4 5 6
MRV13-10- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV13- Manual rotary valve
2 Size
10 - 10 Size
3 Seals
Blank - Buna-NV - Viton
4 Manual Operator
0 - No operatorD - Lever (3-position detent)D2 - Lever (2-position detent)E - Ball (3-position detent)E2 - Ball (2-position detent)K - Knob (2-position, no
detent)
5 Port Size
0- Cartridge only
6 Special Features
00 - Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 AluminumFatigue rated Steel
A2G 1/4 BSPP 02-185804
A3G 3/8 BSPP 02-185805
A6H SAE 6 02-185802
A8H SAE 8 02-185803S2G 1/4 BSPP 02-175127
S3G 1/3 BSPP 02-175128
S6T SAE 6 02-175124
S8T SAE 8 02-175125
Dimensions
mm (inch)
Torque cartridge in housingA- 47-54 Nm (35-40 ft. lbs)S- 68-75 Nm (50-55 ft. lbs)
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Installation Drawing (Steel)Cartridge Only
76.2(3.00)
63.5
(2.50)
57.02(2.245)
2X7.14(0.28)
9.7
(0.38)
76.2
(3.00)1
3
2
22.4
(0.88)
19.1
(0.75)
35.1
(1.38)
22.4
(0.88)
51.3(2.02)
1
2
3
90
15.78-15.82(0.621-0.623)17.38-17.42
(0.684-0.686)
51.3
(2.02)
46,0
(1.81)
9,5 (0.37) Hex
25.4 (1.0) Hex
7/8 - 14 UNF - 2A Thd.
41.3
(1.63)
-
7/25/2019 Eaton pll_2141
12/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-120.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
2
3
1
20
40
60
80
100
120
0
8
4
0 20 40
0 42 6 8 10 12
A
B
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
PressureD
rop
-bar
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 46 L/min (12 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)
Manual operators D- Lever (3-position detent)*D2 - Lever (2-position detent)*
E - Ball (3-position detent)*E2- Ball (2-position detent)*
K- Knob (2-position, no detent)
Cavity C-l2-3
Fluids All general purpose hydraulic fluids such as:MIL-H -5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.32 kg (0.70 lbs)
Seal kit 02-180095 (Buna-N), 02-165887 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV13-12- Manual Rotary ValveManual semi-rotary directional control valve
46 L/min (12 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 3 way2 or 3 position manual semi-rotary directional control valve.Can be used as a diverter or adump valve.
Operation
This valve will direct flowbetween ports 1 and 3 andblock port 2 in one position.
Performance Data
Sectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90,flow will be directed betweenports 1 and 2 and port 3 willbe blocked. During cross-over
transition, all ports are blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
MRV13-12(V)-D/E
3 position models
MRV13-12(V)-D2/2E
2 position models
1
23
1
23
A- Port 1-3B- Port 1-2
-
7/25/2019 Eaton pll_2141
13/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-121.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV13 12 (V) ** ** 00
1 2 3 4 5 6
3
1
88.9(3.50)
2
25.4(1.00)
28.7(1.13)
88.9(3.50)
63.50(2.50)
12.7(0.50)
101.6(4.00)
51.6(2.03)
25.4(1.00)
2 X 10.31(0.406)
50(1.97)
MRV13-12- Manual Rotary ValveManual semi-rotary directional control valve
46 L/min (12 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV13- Manual rotary valve
2 Size
12 - 12 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operator
0 - No operatorD - Lever
(3-position detent)D2 - Lever
(2-position detent)E - Ball (3-position detent)E2 - Ball (2-position detentK - Knob
(2-position,no detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 AluminumFatigue rated Steel
A4G 1/2 BSPP 02-161817
A6G 3/4 BSPP 02-161816
A10H SAE 10 02-160642
A12H SAE 12 02-160646
S4G 1/2 BSPP 02-169815
S6G 3/4 BSPP 02-169814
S10T SAE 10 02-161070
S12T SAE 12 02-169816
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Dimensions
mm (inch)
Torque cartridge in housing
A- 81-95 Nm (60-70 ft. lbs)S- 102-115 Nm (75-85 ft. lbs)
Installation Drawing (Steel)Cartridge Only
90
22.15 - 22.19
(0.872 - 0.874)1
3
2
37,0
(1.45)
41.28
(1.625)
67.82
(2.670)
23.73 - 23.77
(0.934 - 0.936)
-
7/25/2019 Eaton pll_2141
14/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-130.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
3
2
1
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 64 L/min (17 US gpm)
Temperature range -40C to 120C (-40 to 248F)
Manual operators D - Lever (3-position detent)*
D2 - Lever (2-position detent)* K - Knob (2-position, no detent)
Cavity C-16-3
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,53 kg (1.16 lbs)
Seal kit 889632 (Buna-N), 889636 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV3-16- Manual Rotary ValveManual semi-rotary directional control valve
64 L/min (17 USgpm) 210 bar (3000 psi)
Description
This is a 3 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. Can be used as adiverter or a dump valve
Operation
This valve will direct flowbetween ports 1 and 3 and blockport 2 in one position.
Performance Data
Sectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports 1and 2 and port 3 will be blocked.
During cross-over transition, allports are blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
MRV3-16(V)-D
3 position models
MRV3-16(V)-D2
2 position models
1
23
1
23
0 10 20 30 40 50 60
0 2 4 6 8 10 12 14 160
2
4
6
20
40
60
80
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
PressureD
rop
-psi
Pressure
Dro
p
-bar
-
7/25/2019 Eaton pll_2141
15/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-131.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Dimensions
mm (inch)
Torque cartridge in
aluminum housing
108-122 Nm (80-90 ft. lbs)
MRV3-16- Manual Rotary ValveManual semi-rotary directional control valve
64 L/min (17 USgpm) 210 bar (3000 psi)
Model Code
1 Function
MRV3- Manual rotaryvalve 4-way
2 Size
16 - 16 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operations
O - No operatorD - Level (3-position detent)D2 - Level (2-position detent)
K - Knob (2-position, no detent)
Code Port Size Housing Number
Aluminum SteelFatigue Rated
0 Cartridge
A12T SAE12 566152*
A6B 3/4" BSPP 02-1754165*
A10H SAE10 876721
A12H SAE12 876723
A4G 1/2" BSPP 876720
A6G 3/4" BSPP 876722
S4G 1/2" BSPP 02-175131S6G 3/4" BSPP 02-175132
S10T SAE 10 02-175129
S12T SAE 12 02-175130
See section J for housing details.
* Aluminum light duty.
5 Port Size 6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV3 16 (V) ** *** 00
Installation Drawing (Aluminum)Cartridge Only
57.0(2.24)
2
3 28.4
(1.12)
10.3
(0.41)
114.3(4.50)
31.8(1.25)
93.6(3.688)
88.9(3.50)
114.3(4.50)
1/4-20 UNC -2A
2X8.7(0.34)
1
31.8(1.25)
26,95 (1.061)
28,55 (1.124)
1
3
2
38,1 (1.0.50) Hex
1.3125"-12 Thd.
11,1 (0.43)
53,0(2.08)
73,0(2.87)
61,0 (2.40)
90
.B
-
7/25/2019 Eaton pll_2141
16/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-140.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 64 L/min (17 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)Manual operators D- Lever (3-position detent)*
D2 - Lever (2-position detent)*K - Knob (2-position, no detent)
Cavity C-l6-3
Fluids All general purpose hydraulic fluids such as:MIL-H -5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.53 kg (1.16 lbs)
Seal kit 889632 (Buna-N), 889636 (Viton)* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV13-16- Manual Rotary ValveManual semi-rotary directional control valve
64 L/min (17 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 3 way2 or 3 position manual semi-rotary directional control valve.Can be used as a diverter or a
dump valve
Operation
This valve will direct flowbetween ports 1 and 3 and blockport 2 in one position.
Performance Data
Sectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports 1and 2 and port 3 will be blocked.
During cross-over transition, allports are blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
MRV13-16(V)-D
3 position models
MRV13-16(V)-D2
2 position models
1
23
1
23
0 10 20 30 40 50 60
0 2 4 6 8 10 12 14 160
2
4
6
20
40
60
80
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
2
3
1
-
7/25/2019 Eaton pll_2141
17/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-141.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV13 16 (V) ** **** 00
1 2 3 4 5 6
26.90 - 26.94(1.059 - 1.061)
9.5 (0.375) Hex
56.3
(2.22)
74
(2.91)
1 5/16 - 12
38.1 (1.5) Hex
3
2
1
28.50 - 28.54(1.122 - 1.124)
60.33(2.375)
90
MRV13-16- Manual Rotary ValveManual semi-rotary directional control valve
64 L/min (17 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV13- Manual rotary valve
2 Size
16 - 16 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operators
0 - No operatorD - Lever
(3-position detent)D2 - Lever
(2-position detent)K - Knob
(2-position, no detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 AluminumFatigue rated Steel
A10H SAE 10 876721
A12H SAE 12 876723
A4G 1/2 BSPP 876720
A6G 3/4 BSPP 876722
S4G 1/2 BSPP 02-175131S6T 3/4 BSPP 02-175132
S10T SAE 10 02-175129
S12T SAE 12 02-175130
Dimensions
mm (inch)
Torque cartridge in housingA- 108-122 Nm (80-90 ft. lbs)S- 136-149 Nm (100-110 ft. lbs)
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Installation Drawing (Steel)Cartridge Only
88.9(3.50)
76.20
(3.000)
12.7(0.50) 101.6
(4.00)
2 X 10.31(0.406)
25.4(1.00)
1
3
25.4(1.00)
2
108.0(4.25)
56.3(2.22)
25.4(1.00)
54.0(2.13)
-
7/25/2019 Eaton pll_2141
18/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-150.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
4
3
2
1
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 US gpm)
Temperature range -40C to 120C (-40 to 248F)
Manual operators D - Lever (3-position detent)* D2 - Lever (2-position detent)* E - Ball (3-position detent)* E2 - Ball (2-position detent)* K - Knob (2-position, no detent)
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,17 kg (0.38 lbs)
Seal kit 565805 (Buna-N), 889600 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV4-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition port 3 is open to port1. Ports 4 and 2 are closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 to port 2.
During the cross-over transition,ports 2 and 4 are blocked andports 1 and 3 are connected.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
3 position models
A- Port 3 to port 4 or 3 to 2B- Port 4 to port 1 or 2 to 1
3
4
1
2
150
100
50
0
10
8
6
4
2
0 5 10
0 1 2 3
A
B
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
PressureD
rop
-psi
Pressure
Drop
-bar
-
7/25/2019 Eaton pll_2141
19/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-151.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV4-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
Model Code
1 Function
MRV4- Manual rotaryvalve 4-way
2 Size
10 - 10 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operator
O - No operatorD - Level (3-position detent)D2 - Level (2-position detent)E - Ball (3-position detent)E2 - Ball (2-position detent)K - Knob (2-position, no detent)
Code Port Size Housing Number
Aluminum AluminumLight Duty Fatigue Rated Steel
0 Cartridge
A3B 3/8" BSPP 02-179705
A6T SAE 6 566161
A2G 1/4" BSPP 876709
A3G 3/8" BSPP 876715
A6H SAE 6 876708
A8H SAE 8 876713
S2G 1/4" BSPP 02-175139S3G 3/8" BSPP 02-175140
S6T SAE 6 02-175137
S8T SAE 8 02-175138
See section J for housing details.
5 Port Size 6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV4 10 (V) ** *** 00
Dimensions
mm (inch)
Torque cartridge inaluminum housing
47-54 Nm (35-40 ft. lbs)
Installation Drawing (Aluminum)Cartridge Only
SS - 316 stainless steelexternal components(only available for "0" and "F"
options).
4
3
2
1
42.0(1.65)
9,5 (0.38)
25,4 (1.0) Hex
15,80 (0.622)
17,40 (0.685)
18,97 (0.747)
0.875"-14 Thd.
90
37,0
(1.46)
61,9(2.44)
76.2(3.00)
88.9(3.50)
57.15(2.250)
76.2(3.00)
9.5
(0.38)
7.14(0.281)
2-Slots
1
4
2
3 52.6(2.07)
20.8(0.82)
25.4
(1.00)
36.7(1.44)
28.8(1.13)
25.4
(1.00)
7.9(0.31)
-
7/25/2019 Eaton pll_2141
20/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-160.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
2
3
4
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)
Manual operators D- Lever (3-position detent)*D2 - Lever (2-position detent)*
E - Ball (3-position detent)*E2 - Ball (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-l0-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.17 kg (0.38 lbs))
Seal kit 565805 (Buna-N), 889600 (Viton)* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV14-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 4 way2 or 3 position manual semi-rotary directional control valve.In the center condition port 3is open to port 1. Ports 4 and 2are closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 to port 2.
During the cross-over transition,ports 2 and 4 are blocked andports 1 and 3 are connected.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
3 position models
A- Port 3 to port 4 or 3 to 2B- Port 4 to port 1 or 2 to 1
3
4
1
Pressure Drop Curves
Cartridge only
150
100
50
0
10
8
6
4
2
0 5 10
0 1 2 3
A
B
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
PressureD
rop
-psi
Pressure
Drop
-bar
-
7/25/2019 Eaton pll_2141
21/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-161.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV14 10 (V) ** *** 00
1 2 3 4 5 6
MRV14-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV14- Manual rotary valve4 way
2 Size
10 - 10 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operators
0 - No operatorD - Lever
(3-position detent)D2 - Lever
(2-position detent)E - Ball (3-position detent)E2 - Ball (2-position detentK - Knob
(2-position,no detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 Aluminum AluminumLight duty Fatigue rated Steel
A3B 3/8 BSPP 02-179705
A6T SAE 6 566161
A2G 1/4 BSPP 876709
A3G 3/8 BSPP 876715
A6H SAE 6 876708A8H SAE 8 876713
AZG 1/4 BSPP 02-175139
A3G 3/8 BSPP 02-175140
S6T SAE 6 02-175137
S8T SAE 8 02-175138
See section J for housing details.
Dimensions
mm (inch)
Torque cartridge in housingA- 47-54 Nm (35-40 ft. lbs)S- 68-75 Nm (50-55 ft. lbs)
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Installation Drawing (Steel)Cartridge Only
2
4
3
90
15.78-15.82(0.621-0.623)
62.1
(2.445)
25.4 (1.0) Hex
7/8 - 14 UNF - 2A Thd.
41.28
(1.625)
9.5 (0.375) Hex
1
51.26
(2.018)
17.38 - 17.42(0.684 - 0.686) 18.95 - 18.99
(0.746 - 0.748)
4
1
3
34.9(1.37)
76.2(3.00)
57.15(2.250)
9.5(0.37)
50.8(2.00)
22.2(0.87)
44.45(1.750)
22.2(0.87)
76.2(3.00)88.9
(3.50) 2 X 7.11(0.280)
19(0.75)
2
51.21(2.016)
-
7/25/2019 Eaton pll_2141
22/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-170.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)
Manual operators D- Lever (3-position detent)*D2 - Lever (2-position detent)*
E - Ball (3-position detent)*E2 - Ball (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-l2-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.45 kg (0.99 lbs)
Seal kit 02-160979 (Buna-N), 02-160980 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV14-12- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 4 way2 or 3 position manual semi-rotary directional control valve.In the center condition port 3is open to port 1. Ports 4 and 2are closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 to port 2.During the cross-over transition,
ports 2 and 4 are blocked andports 1 and 3 are connected.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
3 position models
A- Port 3 to port 4 or 3 to 2B- Port 4 to port 1 or 2 to 1
3
4
1
2
0
20
40
60
80
100
120
140
160
180
2005
5
0 1 2 3 4 5 6
10
10 15 20
Flow -USgpm (105 SUS Oil @1200F)
Flow - L/min (21,8 cSt Oil @ 490 C )
B
A
PressureDrop-psi
Pressur
eDrop-bar
2
1
3
4
-
7/25/2019 Eaton pll_2141
23/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-171.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV14 12 (V) ** **** 00
1 2 3 4 5 6
3
49.61(1.953)
101.6(4.00)
127.0(5.00)
1
88.9(3.50)
78.6
(3.094)
10.3
(0.406)
4
2
63.5(2.50)
31.8(1.25)
31.8(1.25)
51.6(2.031)
74.4(2.931)
28.7(1.31)
2
4
3
90
20.55 - 20.59(0.809 - 0.811)
90.91
(3.579)
31.75 (1.25) Hex
1 1/16-12 UNF - 2A Thd.
41.28
(1.625)
9.5 (0.375) Hex
49.61
(1.953)
22.13 - 22.17(0.871 - 0.873) 23.73 - 23.77
(0.934 - 0.936)
1
MRV14-12- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV14- Manual rotary valve4 way
2 Size
12 - 12 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operators
0 - No operatorD - Lever
(3-position detent)D2 - Lever
(2-position detent)E - Ball (3-position detent)E2 - Ball (2-position detentK - Knob
(2-position,no detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 AluminumLight duty Steel
A4G 1/2 BSPP 5986431-001
A6G 3/4 BSPP 5986432-001
A8H SAE 8 5986433-001
A10H 3/8 BSPP 5986434-001
A12H SAE 12 5986436-001
S6G 3/4 BSPP 5991073-001
S10H SAE 10 5991074-001
S12H SAE 12 5991075-001
See section J for housing details.
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Dimensions
mm (inch)
Torque cartridge in housing
A- 81-95 Nm (60-70 ft. lbs)S- 102-115 Nm (75-85 ft. lbs)
Installation Drawing (Steel)Cartridge Only
-
7/25/2019 Eaton pll_2141
24/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-180.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Temperature range -40C to 120C (-40 to 248F)
Manual operators D - Lever (3-position detent)* D2 - Lever (2-position detent)* K - Knob (2-position, no detent)
Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,65 kg (1.43 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV4-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 210 bar (3000 psi)
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition all ports are closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 to port 2.
During the cross-over transition,ports 2 and 4 are blocked andports 1 and 3 are connected.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
3 position models
A- Port 3 to port 4 or 3 to 2B- Port 4 to port 1 or 2 to 1
3
4
1
2
150
100
50
0
10
8
6
4
2
0 5 10 15 20 30 40 50
0 1 2 3 4 5 10
A
B
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
4
3
2
1
-
7/25/2019 Eaton pll_2141
25/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-181.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV4-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 210 bar (3000 psi)
Dimensions
mm (inch)
Torque cartridge inaluminum housing108-122 Nm (80-90 ft lbs)
Model Code
1 Function
MRV4- Manual rotaryvalve 4-way
2 Size
16 - 16 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operator
O - No operatorD - Level (3-position detent)D2 - Level (2-position detent)K - Knob (2-position, no detent)
Code Port Size Housing Number
Aluminum Aluminum SteelLight Duty Fatigue Rated
0 Cartridge
A12T SAE 12 566411
A6B 3/4" BSPP 02-175468
A10H SAE 10 876729
A12H SAE 12 876731
A4G 1/2" BSPP 876728
A6G 3/4" BSPP 876730
S4G 1/2" BSPP 02-175143S6G 3/4" BSPP 02-175144
S10T SAE 10 02-175141
S12T SAE 12 02-175142
See section J for housing details.
5 Port Size 6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV4 16 (V) ** **** 00
Installation Drawing (Aluminum)Cartridge Only
114.3(4.50)
139.7(5.50)
93.68(3.688)114.3(4.50)
31.8(1.25)
63.5(2.500)
85.6(3.37)
28.4(1.12)
4
2
1
3
2 Slots
8.74(0.344)
10.3(0.41)
57(2.24)
31(1.2
28,55 (1.124)
26,95 (1.061)
38,1 (1.5) Hex
61,0(2.4)
101,6(4.0)
11,1 (0.438)
1.312"-12 Thd.
25,37 (0.999)
4
3
2
1
53,0(2.09)
90
-
7/25/2019 Eaton pll_2141
26/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-190.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)
Manual operators D- Lever (3-position detent)*D2 - Lever (2-position detent)*K - Knob (2-position, no detent)
Cavity C-l6-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.65 kg (1.43 lbs))
Seal kit 889634 (Buna-N), 889638 (Viton)* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV14-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 4 way2 or 3 position manual semi-rotary directional control valve.In the center condition all ports
are closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 to port 2.
During the cross-over transition,ports 2 and 4 are blocked andports 1 and 3 are connected.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
3 position models
A- Port 3 to port 4 or 3 to 2B- Port 4 to port 1 or 2 to 1
3
4
1
1
3
4
2
150
100
50
0
10
8
6
4
2
0 5 10 15 20 30 40 50
0 1 2 3 4 5 10
A
B
0
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
-
7/25/2019 Eaton pll_2141
27/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-191.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV14 16 (V) ** **** 00
1 2 3 4 5 6
76.2(3.000)
12.7(0.50) 101.6
(4.00)
2 X 10.31(0.406)
4
1
54.0(2.12)
3 82.5
(3.25)
120.7(4.75)
25.4(1.00)
50.8(2.00)
25.4(1.00)
25.4(1.00)
139.7(5.50)
2
56.3(2.21)
2
4
3
90
26.90 - 26.94(1.059 - 1.061)
101.7
(4.00)
38.1 (1.5) Hex
1 5/16-12 UNF-2A Thd.
9.5 (0.375) Hex
1
28.50 - 28.54(1.122 - 1.124)
56.3
(2.21)
60.33
(2.375)
25.33 - 25.37(0.997-0.999)
MRV14-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV14- Manual rotary valve4 way
2 Size
16 - 16 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operators
0 - No operatorD - Lever (3-position detent)D2 - Lever (2-position detent)K - Knob (2-position,no detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 Aluminum Aluminum SteelLight duty Fatigue rated
A12T SAE 12 566411
A6B 3/4 BSPP 02-175468
A10H SAE 10 876729
A12H SAE 12 876731A4G 1/2 BSPP 876728
A6G 3/4 BSPP 876730
S4G 1/2 SSPP 02-175143
S6G 3/4 BSPP 02-175144
S10T SAE 10 02-175141
S12T SAE 12 02-175142
See section J for housing details.
Dimensions
mm (inch)
Torque cartridge in housingA- 108-122 Nm (80-90 ft. lbs)S- 136-149 Nm (100-110 ft. lbs)
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Installation Drawing (Steel)Cartridge Only
-
7/25/2019 Eaton pll_2141
28/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-200.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Temperature range -40C to 120C (-40 to 248F)
Manual operators D - Lever (3-position detent)
E - Ball (3-position detent)Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,27 kg (0.59 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV5-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition all ports closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 and 2. During
the cross-over transition, all portsare blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
3 position models
A- Port 3 to 4 or 3 to 2B- Port 4 to 1C- Port 2 to 1
3
4
1
0 2 4 6 8 10
0 0.5 1.5 2.51 2 3
150
100
50
0
A
B
C
0
12
10
8
6
4
2
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
4
3
2
1
-
7/25/2019 Eaton pll_2141
29/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-201.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV5-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
Model Code
1 Function
MRV5- Manual rotaryvalve 4-way
2 Size
10 - 10 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operator
O - No operatorD - Level (3-position detent)D2 - Level (2-position detent)E - Ball (3-position detent)E2 - Ball (2-position detent)K - Knob (2-position, no detent)
6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV5 10 (V) ** *** 00
Dimensions
mm (inch)
Torque cartridge inaluminum housing47-54 Nm (35-40 ft lbs)
Code Port Size Housing Number
Aluminum Aluminum SteelLight Duty Fatigue Rated
0 Cartridge
A3B 3/8" BSPP 02-179705
A6T SAE 6 566161
A2G 1/4" BSPP 876709
A3G 3/8" BSPP 876715
A6H SAE 6 876708
A8H SAE 8 876713
S2G 1/4" BSPP 02-175139S3G 3/8" BSPP 02-175140
S6T SAE 6 02-175137
S8T SAE 8 02-175138
See section J for housing details.
5 Port Size
Installation Drawing (Aluminum)Cartridge Only
41,0(1.61)
58,0(2.28)
61,9(2.43)
MidPosition
Port 3 to 2and 4 to 1
Port 3 to 4
and 2 to 1
83,0(3.27)
9,5 (0.375)
0.875"-14 Thd.
Locating pin25,4 (1.0) Hex
4
3
2
1 15,75 ( 0.620)
17,40 (0.685)
18,97 (0.747)
45
45
76.2(3.00)
88.9(3.50)
57.15(2.250)
76.2(3.00)
9.5(0.38)
7.14(0.281)
2-Slots
1
4
2
3 52.6(2.07)
20.8(0.82)
25.4(1.00)
36.7(1.44)
28.8(1.13)
25.4(1.00)
7.9(0.31)
-
7/25/2019 Eaton pll_2141
30/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-210.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)
Manual operators D- Lever (3-position detent)*D2- Lever (2 position detent)*
E - Ball (3-position detent)*E2- Ball (3-position detent)*
K - Knob (2 position, no detent)* Light duty housing only.
Cavity C-l0-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.27 kg (0.59 lbs))
Seal kit 565805 (Buna-N), 889600 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV15-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 4 way2 or 3 position manual semi-rotary directional control valve.In the center condition all portsare closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 and 2. During
the cross-over transition, all portsare blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
3 position models
A- Port 3 to 4 or 3 to 2B- Port 4 to 1C- Port 2 to 1
3
4
1
0 2 4 6 8 10
0 0.5 1.5 2.51 2 3
150
100
50
0
A
B
C
0
12
10
8
6
4
2
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
2
1
4
3
-
7/25/2019 Eaton pll_2141
31/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-211.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
4
1
3
34.9(1.37)
76.2(3.00)
57.15(2.250)
9.5(0.37)
50.8(2.00)
22.2(0.87)
44.45(1.750)
22.2(0.87)
76.2(3.00)88.9
(3.50) 2 X 7.11(0.280)
19(0.75)
2
51.21(2.016)
1
2
3
15.78-15.82(0.621-0.623)
17.38-17.42(0.684-0.686)
62.1
(2.445)
9,5 (0.375) Hex
25.4 (1.0) Hex
7/8 - 14 UNF - 2A Thd.
4
18.95 - 18.99(0.746 - 0.748)
51.26
(2.018)
41.28
(1.625)
90
MRV15-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 350 bar (5000 psi)
Model Code MRV15 10 (V) ** **** 00
1 2 3 4 5 6
1 Function
MRV15- Manual rotary valve4 way
2 Size
10 - 10 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operators
0 - No operatorD - Lever (3-position detent)D2 - Lever (2-position detent)E2 - Ball (2-position detentK - Knob (2-position,no detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 Aluminum Aluminum SteelLight duty Fatigue rated
A3B 3/8 BSPP 02-179705
A6T SAE 6 566161
A2G 1/4 BSPP 02-185804
A3G 3/8 BSPP 02-185805A6H SAE 6 02-185802
A8H SAE 8 02-185803
S2G 1/4 SSPP 02-175139
S3G 3/8 BSPP 02-175140
S6T SAE 6 02-175137
S8T SAE 8 02-175138
See section J for housing details.
Dimensions
mm (inch)
Torque cartridge in housingA- 47-54 Nm (35-40 ft. lbs)S- 68-75 Nm (50-55 ft. lbs)
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Installation Drawing (Steel)Cartridge Only
-
7/25/2019 Eaton pll_2141
32/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-220.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
2
4
3
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)
Manual operators D- Lever (3-position detent)E - Ball (3-position detent)
Cavity C-l2-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.45 kg (0.99 lbs))
Seal kit 02-160979 (Buna-N), 02-160980 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV15-12- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 350 bar (5000 psi)
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition all ports are closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop CurvesCartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 and 2. During
the cross-over transition, all portsare blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
3 position models
3
4
1
2
0
20
40
60
80
100
120
140
160
180
2005
5
0 1 2 3 4 5 6
10
10 15 20
Flow -USgpm (105 SUS Oil @1200F)
Flow - L/min (21,8 cSt Oil @ 490 C )
B
A
PressureDrop-psi
Pre
ssureDrop-bar
A - Port 3-4 and port 3-2
B - Port 2-1 and port 4-1
-
7/25/2019 Eaton pll_2141
33/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-221.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV15 12 (V) ** **** 00
1 2 3 4 5 6
MRV15-12- Manual Rotary ValveManual semi-rotary directional control valve
23 L/min (6 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV15- Manual rotary valve4 way
2 Size
12 - 12 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operators
0 - No operatorD -Lever
(3-position detent)E -Ball (3-position detent)D2 -Lever
(2-position detent)E2 -Ball (2-position detent)K -Knob
(2-position, no detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omittedif 00)
Code Port Size Housing Number
0 AluminumLight-duty Steel
A4G 1/2 BSPP 5986431-001
A6G 3/4 BSPP 5986432-001
A8H SAE 8 5986433-001
A10H SAE 10 5986434-001A12H SAE 12 5986436-001
S6G 3/4 BSPP 5991073-001
S10H SAE 10 5991074-001
S12H SAE 12 5991075-001
See section J for housing details.
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Dimensions
mm (inch)
Torque cartridge in housing
A- 81-95 Nm (60-70 ft. lbs)S- 102-115 Nm (75-85 ft. lbs)
3
49.61(1.953)
101.6(4.00)
127.0(5.00)
1
88.9(3.50)
78.6(3.094)
10.3(0.406)
4
2
63.5(2.50)
31.8(1.25)
31.8(1.25)
51.6(2.031)
74.4(2.931)
28.7(1.31)
Installation Drawing (Steel)Cartridge Only
9.5(.375)Hex
31.75(1.25)Hex
1 1/16-12UNF-2A Thd.
49.61(1.953)
90.91(3.579)
20.55-20.59(.809-.811)
22.13-22.17(.871-.873) 23.73-23.77
(.934-.936)
90
1
2
3
4
41.28(1.625)
-
7/25/2019 Eaton pll_2141
34/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-230.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
4
3
2
1
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage
Temperature range -40C to 120C (-40 to 248F)
Manual operators D - Lever (3-position detent)*Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,65 kg (1.43 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton)
Viton is a registered trademark of E.I. DuPont
* Light duty housing only.
MRV5-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 210 bar (3000 psi)
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition all ports are closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 and 2. During
the cross-over transition, all portsare blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
3 position models
A - Port 3 to 4 or 3 to 2B - Port 4 to 1 or 2 to 1
3
4
1
0 10 20 30 40
0 2.5 7.55 10
A
B
12
0
50
100
150
0
2
4
6
8
10
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
PressureD
rop
-psi
PressureD
rop
-bar
-
7/25/2019 Eaton pll_2141
35/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-231.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV5-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 210 bar (3000 psi)
Dimensions
mm (inch)
Torque cartridge inaluminum housing108-122 Nm (80-90 ft lbs)
Model Code
1 Function
MRV5- Manual rotaryvalve 4-way
2 Size
16 - 16 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operator
O - No operatorD - Level (3-position detent)
Code Port Size Housing Number
Aluminum AluminumLight Duty
Fatigue Rated
0 Cartridge
A12T SAE 12 566411
A6B 3/4" BSPP 02-175468
A10H SAE 10 876729
A12H SAE 12 876731
A4G 1/2" BSPP 876728A6G 3/4" BSPP 876730
See section J for housing details.
5 Port Size 6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV5 16 (V) ** **** 00
Installation Drawing (Aluminum)Cartridge Only
114.3(4.50)
139.7(5.50)
46.0(1.81)
93.68(3.688)
114.3(4.50)
31.8(1.25)
63.5(2.500)
85.6(3.37)
28.4(1.12)
4
2
1
3
2 Slots
8.74(0.344)
10.3(0.41)
57(2.24)
31.8(1.25)
1/4-20 UNC-2A
77,0
(3.03)
101,6
(4.0)
11,1 (0.4 3)
Locating Pin
25,37 (0.999)
26,95 (1.061)
28,55 (1.124)
4
3
2
38,1 (1.5) Hex
1.312 1 12 Thd.
1
-
7/25/2019 Eaton pll_2141
36/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-240.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40to 120C(-40 to 248F)
Manual operators D- Lever (3-position detent)** Light duty housing only.
Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0.65 kg (1.43 lbs))
Seal kit 889634 (Buna-N), 889638 (Viton)
Viton is a registered trademark of E.I. DuPont
MRV15-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 350 bar (5000 psi)
Description
This is a high pressure 4 way2 or 3 position manual semi-rotary directional control valve.In the center condition all portsare closed.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports1 and 4 and port 3 and 2. During
the cross-over transition, all portsare blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available withand without detent. Workingpressure 350 bar.
3 position models
A - Port 3 to 4 or 3 to 2B - Port 4 to 1 or 2 to 1
3
4
1
2
0 10 20 30 40
0 2.5 7.55 10
A
B
12
0
50
100
150
0
2
4
6
8
10
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
2
3
4
-
7/25/2019 Eaton pll_2141
37/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-241.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV15 16 (V) * **** 00
1 2 3 4 5 6
76.2(3.000)
12.7(0.50) 101.6
(4.00)
2 X 10.31(0.406)
4
1
54.0(2.12)
3 82.5
(3.25)
120.7(4.75)
25.4(1.00)
50.8(2.00)
25.4(1.00)
25.4(1.00)
139.7(5.50)
2
56.3
(2.21)
MRV15-16- Manual Rotary ValveManual semi-rotary directional control valve
45 L/min (12 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV15- Manual rotary valve4 way
2 Size
16 - 16 size
3 Seals
Blank- Buna-NV- Viton
4 Manual Operators
0 - No operatorD -Lever
(3-position detent)
5 Port Size
0- Cartridge only
6 Special Features
00 -Non (Only required if valvehas special features, omitted
if 00)
Code Port Size Housing Number
0 Aluminum Aluminum SteelLight duty Fatigue rated
A12T SAE 12 566411
A6B 3/4 BSPP 02-175468
A10H SAE 10 876729
A12H SAE 12 876731
A4G 1/2 BSPP 876728
A6G 3/4 BSPP 876730S4G 1/2 SSPP 02-175143
S6G 3/4 BSPP 02-175144
S10T SAE 10 02-175141
S12T SAE 12 02-175142
See section J for housing details.
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Torque cartridge in housingA-108-122 Nm (80-90 ft. lbs)S-136-147 Nm (100-110 ft. lbs)
Installation Drawing (Steel)Cartridge Only
Dimensions
mm (inch)
Port 3 to 4and 2 to 1
38.1 (1.5) Hex
Midposition
Port 3 to 2and 4 to 1
4
3
2
45
45
76.7(3.02)
101.7(4.00)
104.1(4.10)
1 5/16 -12 UNF - 2A Thd.
1 25.33 - 25.37(0.997 - 0.999)
26.90 - 26.94(1.059 - 1.061) 28.50 - 28.54
(1.122 - 1.124)
-
7/25/2019 Eaton pll_2141
38/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-250.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage 164cc/min (10in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40 to 120C (-40 to 248F)Manual operators D- Lever (3-position detent)*
E- Ball (3-position detent)*
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,27 kg (0.59 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV6-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition all port 2 is closed. Allother ports are open.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports 1and 4 and port 3 to 2. During the
cross-over transition all ports 1,3 and 4 are open to each otherand port 2 is blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
3 position models
A - Port 3 to 4 or 3 to 2B - Port 4 to 1C - Port 2 to 1
3
4
1
2
0 2 4 6 8 10
0 0.5 2.5 2.51 2 3
0
A
B
C
0
12
10
8
6
4
2
50
100
150
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
4
3
2
1
-
7/25/2019 Eaton pll_2141
39/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-251.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV6-10- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
Model Code
1 Function
MRV6- Manual rotaryvalve 4-way
2 Size
10 - 10 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operator
O - No operatorD - Level (3-position detent)E - Ball (3-position detent)
6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV6 10 (V) ** *** 00
Dimensions
mm (inch)
Torque cartridge inaluminum housing47-54 Nm (35-40 ft lbs)
Code Port Size Housing Number
Aluminum Aluminum SteelLight Duty Fatigue Rated
0 Cartridge
A3B 3/8" BSPP 02-179705
A6T SAE 6 566161
A2G 1/4" BSPP 876709
A3G 3/8" BSPP 876715
A6H SAE 6 876708
A8H SAE 8 876713
S2G 1/4" BSPP 02-175139S3G 3/8" BSPP 02-175140
S6T SAE 6 02-175137
S8T SAE 8 02-175138
See section J for housing details.
5 Port Size
Installation Drawing (Aluminum)Cartridge Only
83,0(3.27)
41,0(1.61)
58,0(2.28)
61,9(2.43)
Mid position
Port 3 to 2and 4 to 1
9,5 (0.37)
0.875"-14 Thd.
Locating pin
4
3
2
45
45
25,4 (1.0) Hex
15,82 (0.623)
17,42 (0.686)
19,00 (0.748)
1
Port 3 to 4and 2 to 1
76.2(3.00)
88.9(3.50)
57.15(2.250)
76.2
(3.00)
9.5(0.38)
7.14(0.281)
2-Slots
1
4
2
3 52.6(2.07)
20.8(0.82)
25.4(1.00)
36.7(1.44)
25.4(1.00)
28.8(1.14)
7.9(0.31)
-
7/25/2019 Eaton pll_2141
40/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-256.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
4
3
2
1
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 11 L/min (3USgpm)
Temperature range -40C to 120C (-40 to 248F)
Manual operators D - Lever (3-position detent) E - Ball (3-position detent)
Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum and Steel
Weight cartridge only 0,27 kg (0.59 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton)
Viton is a registered trademark of E.I. DuPont
MRV6-16- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 350 bar (5000 psi)
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition port 2 is closed. Allother ports are open.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports 1and 4 and port 3 to 2. During the
cross-over transition all ports 1,3 and 4 are open to each otherand port 2 is blocked.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
3 position models
3
4
1
2
0
50
100
150
200
250
300
Flow-USgpm (135 SUS oil @ 120'F)
P-C1
F-2
P-1
C1-T
C2-T
Pressure
Drop-psi
0 5 10 15 20 25
-
7/25/2019 Eaton pll_2141
41/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-257.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
4.0(101.6)
C1
P
C2
3.0(76.2)
1.124(28.55)
1.061 (1.061)
0.999 (25.37)T
1.875(47.6)
0.938(23.8)
Mid position
P to C2C1 to T
P to C2C1 to T
45
45
P to CC2 to T
MRV6-16- Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 350 bar (5000 psi)
Model Code
1 Function
MRV6- Manual rotaryvalve 4-way
2 Size
16 - 16 size
6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV6 16 (V) D 0 00
5 Port Size
0 - Cartridge Only6 - 3/4" NPTF8 - 1" NPTF12T - SAE 1216T - SAE 16
WARNING
Aluminum housingscan be used for pres-
sures up to 210 bar (3000 psi).Steel housings must be usedfor operating pressures above210 bar (3000 psi).
Dimensions
mm (inch)
Cartridge and Installation Drawing
3 Seal Material
Blank - Buna-NV - Viton
4 Adjustment
D - 3-position detent
P4.375(111.1)
5.0(127.0)
T
3.688(93.7) 4.0
(101.6)
2.25(572.0)
4.125(104.8)
3.0(76.2)
0.156(4.0)
C1
C2
-
7/25/2019 Eaton pll_2141
42/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015D-258.A
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV7-10 - Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
3 position models
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49C (120F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage 164cc/min (10in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40 to 120C (-40 to 248F)Manual operators D- Lever (3-position detent)*
E- Ball (3-position detent)*
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,27 kg (0.59 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
Description
This is a 4 way 2 or 3 positionmanual semi-rotary directionalcontrol valve. In the centercondition all ports are open toeach other.
Operation
This valve will direct flowbetween ports 1 and 2 and ports3 and 4 in one position.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90, flowwill be directed between ports 1and 4 and port 3 to 2. During the
cross-over transition all ports areopen to each other.
Features
Hardened, ground and honedworking parts to limit leakageand prolong life. Various levers
and knobs available with andwithout detent.
A - Port 3 to 4 or 3 to 2B - Port 4 to 1C - Port 2 to 1
0 2 4 6 8 10
0 0.5 2.5 2.51 2 3
0
A
B
C
0
12
10
8
6
4
2
50
100
150
Flow - L/min (21,8 cSt oil @ 49C)
Flow - USgpm (105 SUS oil @ 120F)
Pressure
Drop
-psi
Pressure
Drop
-bar
4 2
3 1
I
1
2
3
4
Operation
Sectional View Performance Data
Features
Description Pressure Drop Curves
D-260.A
-
7/25/2019 Eaton pll_2141
43/174EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 D-259.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV7-10 - Manual Rotary ValveManual semi-rotary directional control valve
11 L/min (3 USgpm) 210 bar (3000 psi)
Model Code
1 Function
MRV7 - Manual rotaryvalve 4-way
2 Size
10 - 10 size
3 Seal Material
Blank - Buna-NV - Viton
4 Manual Operator
O - No operatorD - Level (3-position detent)E - Ball (3-position detent)
6 Special Features
00- None
(Only required if valve has special
features, omitted if 00.)
1 2 3 4 5 6
MRV7 10 (V) ** *** 00
Dimensions
mm (inch)
Torque cartridge inaluminum housing47-54 Nm (35-40 ft lbs)
Code Port Size Housing Number
Aluminum Aluminum SteelLight Duty Fatigue Rated
0 Cartridge
A3B 3/8" BSPP 02-179705
A6T SAE 6 566161
A2G 1/4" BSPP 876709
A3G 3/8" BSPP 876715
A6H SAE 6 876708
A8H SAE 8 876713
S2G 1/4" BSPP 02-175139S3G 3/8" BSPP 02-175140
S6T SAE 6 02-175137
S8T SAE 8 02-175138
See section J for housing details.
5 Port Size
Installation Drawing (Aluminum)Cartridge Only
83,0(3.27)
41,0(1.61)