EasyPower 80 - Witte Lastrup
4
EasyPower 80 is the perfect partner for you, to combinate more than one feeding line. Security switch Drive wheel steel incl. special bearings Reinforced stainless steel casing „The ideal partner for your parallel feeding line“ EasyPower 80 Pricelist 2018 • Filling up to 4 subcircuits feeding lines possible • Faster feeding of the animals • Less trouble in the stable • Lower volume in the stable • Less stress for the animals Witte Lastrup GmbH - Schnelter Str. 42 - 49688 Lastrup Tel.: 04472- 9404-0 [email protected] Internaly clamping screw
Transcript of EasyPower 80 - Witte Lastrup
EasyPower 80 is the perfect partner for you, to combinate more than one feeding line.
Security switch
Drive wheel steel incl. special bearings
Reinforced stainless steel casing
„The ideal partner for your parallel feeding line“
EasyPower 80 Pricelist 2018
• Filling up to 4 subcircuits feeding lines possible
• Faster feeding of the animals
• Less trouble in the stable
• Lower volume in the stable
• Less stress for the animals
Witte Lastrup GmbH - Schnelter Str. 42 - 49688 LastrupTel.: 04472- 9404-0 [email protected]
Internaly clamping screw
Hopper
Art.-Nr.: 10111043
- Stainless steel (AISI 304)- one way - with motorized auger 0,18 KW- for tube sytem Ø 80 mm
PU: 1 Pcs
HopperFor chain system
Ø 80 mm
Art.-Nr.: 10022017
Drive unit EasyPower
- Stainless steel (AISI 304)- gear motor 2,2 KW - internaly clamping screw- for tube sytem Ø 80 mm
PU: 1 Pcs
Art.-Nr.: 10211028
chain, hardened
- Disc-Ø 60 mm - Disc distance 80 mm - for tube sytem Ø 80 mm
PU: 50 mtr
Art.-Nr.: 10211030
chain coupler, hardened
- galvanized yellow - 8 x 42mm - for chain with
Disc distance 80 mm
PU: 1 Pcs / Minimum order quantity.:10 Pcs
Drive unitFor chain system Ø 80 mm
Maximum calculative systemlength at max. 50% filling
Drive unit 2,2 Kw
For conveying meal / granulate 200 mtr
For conveying pellets 140 mtr
Max. running time / Day 6 h
Max. quantity corners 10 Pcs
Quantity of tranportation ca. 2,5 t/h
• Max Angle for installation conveying tubes is 45° • Softstart has to be installed
!
Note
Gear motors have
to be protected against
water contact! !
Note
Witte Lastrup GmbH - Schnelter Str. 42 - 49688 LastrupTel.: 04472- 9404-0 [email protected]
Es gelten unsere Allgemeinen Geschäftsbedingungen ( www.witte-lastrup.de/agb )
Control segment
Art.-Nr.: 10221011
- galvanized- with inspection window - for tube sytem Ø 80 mm - length: 500 mm
PU: 1 Pcs / 100 pcs full PU
Droplet
Art.-Nr.: 10312000
- stainless steel (AISI304)- motor actuated- incl. cover - for EasyPower 80 - assembled
PU: 1 Pcs
Droplet
Art.-Nr.: 10312001
- stainless steel (AISI304)- manual actuated ( roap set incl)
- incl. cover- for EasyPower 80
PU : 1 Pcs
Conveyor tube
Art.-Nr.: 818170
- 80,00 x 1,5 mm
- galvanized according EN 10305-3
packed in bundles,length of 6 mtr
Tube coupler
Art.-Nr.: 10222079
- galvanized-1-piece, with screws and
nuts- for tube sytem Ø 80 mm- length: 200 mm
PU: 1 Pcs / 42 Pcs ( box)
Corner
Art.-Nr.: 10222077
- 90°- stainless steel housing- with cast iron wheel- with stainless steel axle and
screws - for tube sytem Ø 80 mm
PU: 1 Pcs
TransportationFor chain system Ø 80 mm
Witte Lastrup GmbH - Schnelter Str. 42 - 49688 LastrupTel.: 04472- 9404-0 [email protected]
Es gelten unsere Allgemeinen Geschäftsbedingungen ( www.witte-lastrup.de/agb )
Schnelter Str. 42D-49688 LastrupTel.: +49(0) 4472 9404 0Fax: +49(0) 4472 9404 40
www.witte-lastrup.de
Schnelter Str. 42D-49688 LastrupTel.: +49(0) 4472 9404 62Fax: +49(0) 4472 9404 47
www.witte-lastrup.de
Schnelter Str. 42D-49688 LastrupTel.: +49(0) 4472 9404 16Fax: +49(0) 4472 9404 44
www.witte-lastrup.de
K.H. Witte GmbH & Co KG
• Gear motors• Electric motors• Conveying systems
K.H. Witte Anlagenbau GmbH & Co KG
• Mechanical feed systems• Silo facilities• Elevators• Trough chain conveyors• Grinders and Mixers
Witte Lastrup GmbH
• Feed sytems forPig and Poultry
