Easy testing for smps led driver
-
Upload
embuilt-technologies -
Category
Technology
-
view
71 -
download
2
Transcript of Easy testing for smps led driver
computer
Smart QCTHDPM1variac
Auto Volt switcher
Easy switch (Device
under test)SMPS for testing
Load
SMART-QC
It measures AC and DC parameters. It has RS485 port in back.
SMART-QC
THDPM-1
THDPM-1
•- Measures all AC parameters and THD upto 55th harmonics
•- Reads all SMART-QC data using RS485 port at back
-Easily configurable limits for Pass/Fail status
Pass/Fail LED
Variac and Auto volt switcher
Variac –We are using two variacs for 170V and 250V.
Auto Volt Switcher-It is a programmable switching device. Four Buttons enable output in any one of 4 modes:
1. Relay1-170 volt
2. Relay2-250 volt
3. Zero output
4. Auto mode- in this mode it provides zero volt, 170V and 250V for 5 sec each.
The objective here is to check and store all readings at two different voltage inputs.
Software
Software--It is easy to configure limits.
-It automatically detects the test mode from Volt-switcher.
- You can save in csv data on two/three different voltage levels on a single button.
Total testing time is one min per SMPS/LED Driver
Connection time 25sec
Press the button 05sec
Measurement time 20sec
Checking OK 10sec
Total Time 60sec
Display Harmonic Graphical view