Easy Spot Weld Fasteners - Paulin · PDF fileEasy Spot Weld Fasteners Technical Expertise...

Easy Spot Weld FastenersTechnical Expert ise Since 1952

PAULIN INDUSTRIES, INC.12400 Plaza Drive • Parma, Ohio 44130-1057

p. 216.433.7633 f. 216.433.7622

1 - 8 0 0 - W E L D N U Tw w w. P a u l i n U S A . c o m


p. 216.433.7633 f. 216.433.7622


12400 PLAZA DRIVE, PARMA, OH 44130-‐1057

2014

Dear Valued Customer,

With the acquisition of Paulin Industries, Inc by the Hillman Group out of Cincinnati, Oh

io in February 2013 we

have entered an exciting period in our history.

The Hillman Groups strong financial footing and experience in our indu

stry further strengthens and expands

our resources and ability to service your product needs.

Paulin stocks a complete range of quality Weld Fasteners and Lubrication fittings at our Parma location for

same day shipment to best service your needs.

We are supported by our manufacturing divisions that provide specialty bolts, nuts; stud

s, fittings and

specialty components produced in our cold forming and screw machine operations as well as locking

fasteners.

Please take a moment to review our new condensed Weld Fastener catalogue as well as the many other

products and services we provide.

We are an ISO approved source and provide a high quality pro

duct.

Our many product catalogues can be seen and downloaded in PDF format from our US web site at:

www.paulinusa.com

Thank you for your past support and we look forward to expanding our business

relationship with the many

products and services we can provide to you.

Yours sincerely,

Robert J. Finch General Manager

PAULIN INDUSTRIES, INC

Welcome to the 400 Catalogue

Please click here to begin...



60116011

Vancouver • Edmonton • Winnipeg • Toronto • Montreal • MonctonVancouver • Edmonton • Winnipeg • Toronto • Montreal • Moncton

Fluid Flow ComponentsComposantes pour un monde FluideFluid Flow ComponentsComposantes pour un monde Fluide

LP GAS PRODUCTS

BULK STORAGE

TRANSPORT/DELIVERY RESIDENTIAL

INDUSTRIAL / COMMERCIAL RECREATIONAL / OUTDOOR

GP410

®

VancouVer3179 Thunderbird Cres.Burnaby, BC V5A 3G1Tel: 604-421-3096Fax: 604-421-3046

edmonton11714 - 180th St.Edmonton, AB T5S 1N7Tel: 780-450-1346Fax: 780-463-3597

winnipeg1670A Inkster Ave.Winnipeg, MB R2X 2W8Tel: 204-694-3802Fax: 204-694-3804

montreal2591 Rue DebrayLaval, QC H7S 2J4Tel: 450-688-4292Fax: 450-688-4750

moncton159 Henri Dunant St.Moncton, NB E1E 1E4Tel: 506-857-8658Fax: 506-857-9338

H.Paulin & Co. Limited 55 Milne Ave., Toronto, ON Canada M1L 4N3Website: www.hpaulin.com Tel: 416-694-3351 Fax: 416-694-1869

EXPANSION PLUGSBOUCHONS D’EXPANSIONEXPANSION PLUGSBOUCHONS D’EXPANSION

EP410EP410

®®

®







OIL DRAIN PLUGSBOUCHONS DE VIDANGEOIL DRAIN PLUGSBOUCHONS DE VIDANGE

DP1090

®®

REPAIR LINES,

ADAPTORS, FITTINGS

AND TOOLS

COOLANT

BRAKE SYSTEM FUEL SYSTEM

TRANSMISSION

VANCOUVER • • • •EDMONTON WINNIPEG MONTREAL MONCTONH. Paulin & Co. Limited Toronto, Canada M1L 4N3

BL 107

Quality Tools

Division of H. Paulin & Co. Limited

INDUSTRIAL POWER BITS • NUTSETTERS • BIT HOLDERS • SCREWDRIVERS •TOOL KITS

PT 0606October, 2007

ISO 9001:2000 Certified

WP509

200920092009

VANCOUVER3179 Thunderbird Cres.Burnaby, BCV5A 3G1Tel: 604-421-3096Fax: 604-421-3046

EDMONTON11714 - 180th St.Edmonton, ABT5S 1N7Tel: 780-450-1346Fax: 780-463-3597

WINNIPEG1670A Inkster Ave.Winnipeg, MBR2X 2W8Tel: 204-694-3802Fax: 204-694-3804

MONTREAL2591 Rue DebrayLaval, QCH7S 2J4Tel: 450-688-4292Fax: 450-688-4750

MONCTON159 Henri Dunant St.Moncton, NBE1E 1E4Tel: 506-857-8658Fax: 506-857-9338


WHEEL PARTSPIECES DE ROUE


WHEEL PARTSPIECES DE ROUEWelcome to 's Online Catalogue

Please click here to begin...Welcome to 's Online Catalogue


Other ProductCataloguesAvailable

12400 Plaza Drive • Parma, Ohio 44130-1057p. 216.433.7633 f. 216.433.7622

Lubrication Fittings

www.paul inusa.com

PAULIN INDUSTRIES INC.12400 Plaza Drive, Unit 1Parma, Ohio 44130-1057

Tel: (216) 433-4132Fax: (216) 767-5911

1-800-935-3688

ROBERT J. FINCHGeneral Manager U.S. [email protected] Mobile: (216) 533-0700

Manufacturers & Distributors of Specialty Fasteners

www.PaulinUSA.com

11 - 8 0 0 - W E L D N U T w w w . P a u l i n U S A . c o m

Easy Spot®Cross Reference Chart Cross Reference Chart

R

O G Easy Spot Description Page 2000 Series “42” Piloted Projection Weld Nut

2000 Series “40” Piloted Projection Weld Nut Type “F” Standard Pilot

AA “52” 3 Under the Head Sausage Projection Weld Screw

DEK “41” Metric Piloted Projection Weld Nut Type “F” Standard Pilot

DEK “43” Metric Piloted Projection Weld Nut Type “F” Short Pilot

FH “94” Leg Leveller

FT “96” Leg Leveller

GW NN “54” 3 Top of the Head Projection Weld Screw

GWM NA “55” 3 Top of the Head Metric Projection Weld Screw

HL3/6 “36” 3 or 6 Projection Standard Piloted Hex Weld Nut Type “E”

HL3/6 “37” 3 or 6 Projection Standard Piloted Metric Hex Weld Nut Type “E”

HS3/6 “38” 3 or 6 Projection Short Piloted Hex Weld Nut Type “E”

HS3/6 “39” 3 or 6 Projection Short Piloted Metric Hex Weld Nut Type “E”

HW MN “50” 3 Under the Head Projection Weld Screw

HWM MNM “51” 3 Under the Head Projection Metric Weld Screw

ND S2* “08” Bridge or Dual Tab Spot Weld Nut

NDM “09” Bridge or Dual Metric Tab Spot Weld Nut

PD “70” 2 Projection Spade Screw

PG NP “82” 3 Top Projection Weld Pin

PGM “83” 3 Top Projection Metric Weld Pin

PH MP “80” 3 Under the Head Projection Weld Pin

PHM “81” 3 Under the Head Projection Metric Weld Pin

PN P1 “26” Single Projection Weld Nut –Wide Series

PNZ “26-SS” Stainless Steel Single Projection Weld Nut—Wide Series

PNM “27” Single Projection Metric Weld Nut-Wide Series

QN* P2 “24” 4 Projection Weld Nut *Closest Equivalent

QNM* “25” 4 Projection Metric Weld Nut *Closest Equivalent

RN “20” 2 Ribbed Projection Weld Nut

RNZ “20-SS” Stainless Steel 2 Ribbed Projection Weld Nut

RNM “21” 2 Ribbed Projection Metric Weld Nut

RW UN “60” Ring Projection Weld Screw

RWM “61” Ring Projection Metric Weld Screw

SN S1 “06” Single Tab Spot Weld Nut– Wide Series

SNZ “06-SS” Stainless Steel Single Tab Spot Weld Nut– Wide Series

SNM “07” Single Tab Metric Spot Weld Nut– Wide Series

SP LU “86” 90 Degree Spade Weld Pin

SS LJ “74” 90 Degree Spade Weld Screw

SSM “75” 90 Degree Metric Spade Weld Screw

TP “10” Dual Tapped Spot Weld Nut

XN** “02” Single Tab Weld Nut -Narrow Series **Less Target

XNM** “03” Single Tab Metric Weld Nut -Narrow Series **Less Target

XN “04” Single Tab Weld Nut with Target – Narrow Series

XNM “05” Single Tab Metric Weld Nut with Target -Narrow Series

18

17

21

19

19

30

31

22

22

14

16

15

16

20

20

6

6

24

28

28

27

27

13

13

13

11

12

9

9

10

23

23

5

5

5

29

25

26

7-8

3

3

4

4

2

Easy Spot®


PHOTO INDEX PHOTO INDEX

R

02 INCH 03 METRIC

SINGLE TAB- NARROW SERIES

04 INCH 05 METRIC

SINGLE TAB WITH TARGET NARROW SERIES

06 INCH 07 METRIC

SINGLE TAB- WIDE SERIES

08 INCH 09 METRIC

DOUBLE TAB, BRIDGE LONG SERIES

10 INCH DUAL TAPPED

20 INCH 21 METRIC

2 PROJECTION RIBBED

24 INCH 25 METRIC

4 PROJECTION

26 INCH 27 METRIC

SINGLE PROJECTION WIDE SERIES

36 INCH 37 METRIC

38 INCH 39 METRIC

Standard Pilot Projection Hex Weld Nuts- “3” or “6” Projection Type “E” Short Pilot Projection Hex Weld Nuts

“3” or “6” Projection -Type “E”

40 INCH 41 METRIC

42 INCH 43 METRIC

Standard Pilot Projection Square Weld Nuts Projection -Type “F”

Short Pilot Projection Square Weld Nuts Projection -Type “F”

5O INCH 51 METRIC

3 Under the Head Projections Weld Screws.

52 INCH 53 METRIC

3 Under the Head Sausage Projection Weld Screws

54 INCH 55 METRIC

3 Top of the Head Projection Weld Screws

60 INCH 61 METRIC

Ring Projection Weld Screws

70 INCH 71 METRIC

2 Projection Spade Screw

74 INCH 75 METRIC

90 Degree Spade Screw

80 INCH 81 METRIC

3 Under the Head Projection Weld Pins

82 INCH 83 METRIC

3 Top of the Head Projection Weld Pins

86 INCH 87 METRIC

90 Degree Weld Pin

90 INCH Leg Leveler

94 INCH Leg Leveler

96 INCH Leg Leveler

INCH RETAINER NUT

PHOTO SERIES DESCRIPTION PAGE

3

4

5

6

7-8

9-10

11-12

13

14-16

17-19

20

21

22

23

24

25-26

27

28

29

30

30

31

32


Easy Spot®“02” Inch and “03” Metric Spot Weld

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Pilot Hole

02-1112 6-32 .370 / .390 .091 / .097 .704 / .734 .178 / .198 .025 / .042 .168 / .208 .203

02-1412 8-32 .370 / .390 .091 / .097 .704 / .734 .193 / .213 .025 / .042 .168 / .208 .219

02-1513 10-24 .433 / .453 .091 / .097 .797 / .827 .224 / .244 .025 / .042 .168 / .208 .250

02-1713 10-32 .433 / .453 .091 / .097 .797 / .827 .224 / .244 .025 / .042 .168 / .208 .250

02-2115 1/4-20 .428 / .448 .091 / .097 .923 / .953 .271 / .307 .030 / .047 .230 / .270 .312

02-2718 5/16-18 .428 / .448 .122 / .128 1.110 / 1.140 .349 / .369 .075 / .092 .261 / .301 .375

02-3320 3/8-16 .552 / .572 .122 / .128 1.235 / 1.265 .428 / .448 .085 / .102 .324 / .364 .453

“02” Inch

“03” Metric

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Pilot Hole

03-03518 M3.5 x 0.6 9.4 / 9.9 2.3 / 2.5 17.6 / 18.4 4.5 / 5.0 0.7 / 1.1 4.4 / 5.2 5.2

03-04018 M4 x 0.7 9.4 / 9.9 2.3 / 2.5 17.6 / 18.4 4.9 / 5.4 0.7 / 1.1 4.4 / 5.2 5.6

03-05020 M5 x 0.8 10.8 / 11.3 2.3 / 2.5 19.6 / 20.4 5.7 / 6.2 0.7 / 1.1 4.4 / 5.2 6.4

03-06024 M6 x 1.0 10.8 / 11.3 3.1 / 3.3 23.6 / 24.4 6.9 / 7.4 1.1 / 1.5 6.0 / 6.8 7.6

03-08028 M8 x 1.25 10.8 / 11.3 3.1 / 3.3 27.6 / 28.4 8.9 / 9.4 1.9 / 2.3 6.7 / 7.5 9.6

03-10032 M10 x 1.5 13.7 / 14.3 3.1 / 3.3 31.6 / 32.4 10.9 / 11.4 2.3 / 2.7 8.3 / 9.1 12.2

Easy Spot “02” Inch and “03” Metric Spot Weld

R

NUT PILOT

NUT PILOT

All dimensions are in inches. All parts are available to be plated . (Zinc, Zinc Yellow, Copper) Also available to be produced in Stainless Steel

All dimensions are in millimeters. All parts are available to be plated . (Zinc, Zinc Yellow, Copper) Also available to be produced in Stainless Steel

Easy Spot “02” Inch and “03” Metric Spot Weld Nuts are suitable for confined area applications. The precision pilot facilitates easy loca-tion

Easy-Spot "02" Inch Spot Weld Nuts are suitable for confined area applications. The precision pilot facilitates easy location.

4

Easy Spot®


“04” Inch and “05” Metric Spot Weld

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Pilot Hole

Target ”TD”

Thick-ness

“TT”

04-1112 6-32 .370 /.390 .091 /.097 .704 / .734 .178 / .198 .025 / .042 .168 / .208 .203 .235/.265 .075/.085

04-1412 8-32 .370 / .390 .091 /.097 .704 / .734 .193 / .213 .025 / .042 .168 / .208 .219 .235/.265 .075/.085

04-1513 10-24 .433 / .453 .091 / .097 .797 / .827 .224 / .244 .025 / .042 .168 / .208 .250 .266/.296 .075/.085

04-1713 10-32 .433 / .453 .091 / .097 .797 / .827 .224 / .244 .025 / .042 .168 / .208 .250 .266/.296 .075/.085

04-2115 1/4-20 .428 / .448 .091 / .097 .923 / .953 .271 / .307 .030 / .047 .230 / .270 .312 .266/.296 .075/.085

04-2718 5/16-18 .428 / .448 .122 / .128 1.110 / 1.140 .349 / .369 .075 / .092 .261 / .301 .375 .328/.358 .090/.100

04-3320 3/8-16 .552 / .572 .122 / .128 1.235 / 1.265 .428 / .448 .085 / .102 .324 / .364 .453 .396/.421 .090/.100

“04” Inch

“05” Metric

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Pilot Hole

Target “TD”

Thickness “TT”

05-04018 M4 x 0.7 9.4 / 9.9 2.3 / 2.5 17.6 / 18.4 4.9 / 5.4 0.7 / 1.1 4.4 / 5.2 5.6 5.95/6.75 1.91/2.06

05-05020 M5 x 0.8 10.8 / 11.3 2.3 / 2.5 19.6 / 20.4 5.7 / 6.2 0.7 / 1.1 4.4 / 5.2 6.4 6.7/7.5 1.91/2.06

05-06024 M6 x 1.0 10.8 / 11.3 3.1 / 3.3 23.6 / 24.4 6.9 / 7.4 1.1 / 1.5 6.0 / 6.8 7.6 6.7/7.5 1.91/2.06

05-08028 M8 x 1.25 10.8 / 11.3 3.1 / 3.3 27.6 / 28.4 8.9 / 9.4 1.9 / 2.3 6.7 / 7.5 9.6 8.3/9.1 2.21/2.36

05-10032 M10 x 1.5 13.7 / 14.3 3.1 / 3.3 31.6 / 32.4 10.9 / 11.4 2.3 / 2.7 8.3 / 9.1 12.2 9.9/10.7 2.21/2.36

Easy Spot “04” Inch and “05” Metric Spot Weld

R

Easy Spot “04” Inch and “05” Metric Spot Weld Nuts are suitable for confined area applications. The reduced thick-ness target area is recommended for welding to thinner stock. The precision pilot facilitates easy location.

All dimensions are in millimeters. All parts are available to be plated . (Zinc, Zinc Yellow, Copper) Also available to be produced in Stainless Steel

All dimensions are in inches. All parts are available to be plated . (Zinc, Zinc Yellow, Copper) Also available to be produced in Stainless Steel

NUT PILOT

NUT PILOT

Easy Spot “04” Inch and “05” Metric Spot Weld Nuts are suitable for confined area applications. The reduced thickness target area is recommended for welding to thinner stock. The precision pilot facilitates easy location.


Easy Spot®“06” Inch & “07” Metric Spot Weld Nuts

Easy Spot “06” Inch and “07” Metric Spot Weld Nuts have a wide body and can be utilized to reinforce an area as well as to provide a threaded fastener. The precision pilot facilitates easy location.

R

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Pilot Hole

06-1109 6-32 .433/.453 .091/.097 .610/.640 .178/.198 .025/.042 .172/.202 .203

06-1409 8-32 .433/.453 .091/.097 .610/.640 .193/.213 .025/.042 .172/.202 .219

06-1510 10-24 .433/.453 .091/.097 .610/.640 .224/.244 .025/.042 .172/.202 .250

06-1710 10-32 .433/.453 .091/.097 .610/.640 .224/.244 .025/.042 .172/.202 .250

06-2113 1/4-20 .495/.520 .122/.128 .797/.827 .287/.307 .045/.062 .235/.265 .312

06-2213 1/4-28 .495/.520 .122/.128 .797/.827 .287/.307 .045/.062 .235/.265 .312

06-2716 5/16-18 .620/.655 .138/.145 .969/.999 .349/.369 .075/.092 .266/.296 .375

06-2816 5/16-24 .620/.655 .138/.145 .969/.999 .349/.369 .075/.092 .266/.296 .375

06-3318 3/8-16 .620/.655 .135/.145 1.110/1.140 .428/.448 .085/.102 .329/.359 .453

06-3418 3/8-24 .620/.655 .138/.145 1.110/1.140 .428/.448 .085/.102 .329/.359 .453

“06” Inch

Easy Spot “06” Inch & “07” Metric Spot Weld Nuts

Page

Easy Spot “06” Inch and “07” Metric Spot Weld Nuts have a Wide body and can be utilized to re-inforce an area as well as to provide a threaded fastener. The precision pilot facilitates easy loca-tion.

Part Number

Size Width “W”

Thick-ness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Pilot Hole

07-04016 M4 x 0.7 10.8/11.3 2.3/2.5 15.6/16.4 4.9/5.4 0.7/1.1 4.4/5.2 5.6

07-05016 M5 x 0.8 10.8/11.3 2.3/2.5 15.6/16.4 5.7/6.2 0.7/1.1 4.4/5.2 6.4

07-06020 M6 x 1.0 12.7/13.4 3.1/3.3 20.2/21.0 7.3/7.8 1.1/1.5 6.0/6.8 8.0

07-08025 M8 x 1.25 15.7/16.4 3.5/3.7 24.6/25.4 8.9/9.4 1.9/2.3 6.7/7.5 9.6

07-10028 M10 x 1.5 15.7/16.4 3.5/3.7 28.2/29.0 11.5/12.0 2.3/2.7 8.3/9.1 12.2

“07” Metric All dimensions are in inches.

All dimensions are in millimeters.

NUT PILOT

NUT PILOT

ALL AVAILABLE TO BE PLATED:ZINC, ZINC/YELLOW, COPPER FLASH. ALSO AVAILABLE IN STAINLESS STEEL

All dimensions are in millimeters.


Easy Spot®

Part Number

Size Width “W”

Thick-ness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Hole Ctr “PC”

10-1108 6-32 .495/.520 .091/.097 .860/.890 .178/.198 .026/.042 .172/.202 .495/.505

10-1112 6-32 .495/.520 .091/.097 1.110/1.140 .178/.198 .026/.042 .172/.202 .745/.755

10-1116 6-32 .495/.520 .091/.097 1.360/1.390 .178/.198 .026/.042 .172/.202 .995/1.005

10-1132 6-32 .495/.520 .091/.097 2.360/2.390 .178/.198 .026/.042 .172/.202 1.995/2.005

10-1408 8-32 .495/.520 .091/.097 .860/.890 .193/.213 .026/.042 .172/.202 .495/.505

10-1412 8-32 .495/.520 .091/.097 1.110/1.140 .193/.213 .026/.042 .172/.202 .745/.755

10-1416 8-32 .495/.520 .091/.097 1.360/1.390 .193/.213 .026/.042 .172/.202 .995/1.005

10-1420 8-32 .495/.520 .091/.097 1.610/1.640 .193/.213 .026/.042 .172/.202 1.245/1.255

10-1432 8-32 .495/.520 .091/.097 2.360/2.390 .193/.213 .026/.042 .172/.202 1.995/2.005

10-1512 10-24 .495/.520 .091/.097 1.110/1.140 .224/.244 .026/.042 .172/.202 .745/.755

10-1516 10-24 .495/.520 .091/.097 1.360/1.390 .224/.244 .026/.042 .172/.202 .995/1.005

10-1520 10-24 .495/.520 .091/.097 1.610/1.640 .224/.244 .026/.042 .172/.202 1.245/1.255

10-1524 10-24 .495/.520 .091/.097 1.860/1.890 .224/.244 .026/.042 .172/.202 1.495/1.505

10-1708 10-32 .495/.520 .091/.097 .860/.890 .224/.244 .026/.042 .172/.202 .495/.505

10-1712 10-32 .495/.520 .091/.097 1.110/1.140 .224/.244 .026/.042 .172/.202 .745/.755

10-1716 10-32 .495/.520 .091/.097 1.360/1.390 .224/.244 .026/.042 .172/.202 .995/1.005

10-1720 10-32 .495/.520 .091/.097 1.610/1.640 .224/.244 .026/.042 .172/.202 1.245/1.255

10-1724 10-32 .495/.520 .091/.097 1.860/1.890 .224/.244 .026/.042 .172/.202 1.495/1.505

“10” Inch

Easy Spot “10” Inch Spot Weld Nuts

R

Easy Spot “10” Inch Dual Tapped Spot Weld Nuts reduce cost by allowing the use of one in-stead of two parts. Accurate alignment is provided when two tapped holes are required in close proximity. Ideal for bridging two components.

All dimensions are in inches.

All parts are available to be plated: Zinc, Zinc/yellow, Copper flashed. Also available in Stainless Steel

“10” Inch Spot Weld NutsEasy Spot “10” Inch Dual Tapped Spot Weld Nuts reduce cost by allowing the use of one instead of two parts. Accurate alignment is provided when two tapped holes are required in close proximity. Ideal for bridging two components.

8

Easy Spot®


“10” Inch Spot Weld NutsEasy Spot “10” Inch Dual Tapped Spot Weld Nuts reduce cost by allowing the use of one in-stead of two parts. Accurate alignment is provided when two tapped holes are required in close proximity. Ideal for bridging two components.

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diameter “PD”

Height “PH”

To End “PE”

Hole Ctr “PC”

10-2110 1/4-20 .495/.520 .122/.128 1.110/1.140 .287/.307 .046/.062 .235/.265 .620/.630

10-2112 1/4-20 .495/.520 .122/.128 1.235/1.265 .287/.307 .046/.062 .235/.265 .745/.755

10-2116 1/4-20 .495/.520 .122/.128 1.485/1.515 .287/.307 .046/.062 .235/.265 .995/1.005

10-2118 1/4-20 .495/.520 .122/.128 1.610/1.640 .287/.307 .046/.062 .235/.265 1.120/1.130

10-2120 1/4-20 .495/.520 .122/.128 1.735/1.765 .287/.307 .046/.062 .235/.265 1.245/1.255

10-2124 1/4-20 .495/.520 .122/.128 1.985/2.015 .287/.307 .046/.062 .235/.265 1.495/1.505

10-2128 1/4-20 .495/.520 .122/.128 2.235/2.265 .287/.307 .046/.062 .235/.265 1.745/1.755

10-2132 1/4-20 .495/.520 .122/.128 2.485/2.515 .287/.307 .046/.062 .235/.265 1.995/2.005

10-2722 5/16-18 .620/.655 .138/.145 1.923/1.953 .349/.369 .076/.092 .266/.296 1.370/1.380

10-3322 3/8-16 .620/.655 .138/.145 2.047/2.077 .428/.448 .086/.102 .329/.359 1.370/1.380

“10” Inch


R

Easy Spot “10” Inch Dual Tapped Spot Weld Nuts reduce cost by allowing the use of one in-stead of two parts. Accurate alignment is provided when two tapped holes are required in close proximity. Ideal for bridging two components.

All dimensions are in inches All Parts are Available with Plating: Zinc, Zinc & Yellow, Copper Flash Also available in Stainless Steel-price on application

NUT PILOT


Easy Spot®

Easy Spot “20” Inch Projection Weld Nuts have two ribbed projections for equal welding strength. The depth of pilot prevents shunting, eliminating the necessity of retapping damaged threads, and provides additional thread depth.

“20” Inch Spot Weld Nuts

Part Number

Size Width “W”

Thick-ness “T”

Length “L”

Diame-ter

“PD”

Height “PH”

Projec-tion

Width “A”

Projection Height

“B”

Sheet Hole

Projection Length

“C”

20-1110 6-32 .370/.390 .091/.097 .610/.640 .178/.198 .026/.042 .089/.099 .010/.014 .203 .079/.109

20-1410 8-32 .370/.390 .091/.097 .610/.640 .193/.213 .026/.042 .089/.099 .010/.014 .219 .079/.109

20-1510 10-24 .370/.390 .091/.097 .610/.640 .224/.244 .026/.042 .089/.099 .010/.014 .250 .079/.109

20-1710 10-32 .370/.390 .091/.097 .610/.640 .224/.244 .026/.042 .089/.099 .010/.014 .250 .079/.109

20-2113 1/4-20 .495/.520 .122/.128 .797/.827 .287/.307 .046/.062 .120/.130 .021/.025 .312 .110/.140

20-2213 1/4-28 .495/.520 .122/.128 .797/.827 .287/.307 .046/.062 .120/.130 .021/.025 .312 .110/.140

20-2716 5/16-18 .620/.655 .138/.145 .969/.999 .349/.369 .076/.092 .120/.130 .025/.029 .375 .126/.156

20-2816 5/16-24 .620/.655 .138/.145 .969/.999 .349/.369 .076/.092 .120/.130 .025/.029 .375 .126/.156

20-3316 3/8-16 .620/.655 .138/.145 .969/.999 .428/.448 .086/.102 .120/.130 .025/.029 .453 .126/.156

20-3416 3/8-24 .620/.655 .138/.145 .969/.999 .428/.448 .086/.102 .120/.130 .025/.029 .453 .126/.156

20-4418 1/2-13 .734/.797 .184/.190 1.110/1.140 .569/.599 .086/.102 .120/.130 .026/.030 .609 .141/.171

“20” Inch


R

Easy Spot “20” Inch Projection Weld Nuts have two ribbed projections for equal weld-ing strength. The depth of pilot prevents shunting, eliminating the necessity of re-tapping damaged threads, and provides addi-

All dimensions are in inches All Parts are Available with Plating: Zinc, Zinc & Yellow, Copper Flash Also available in Stainless Steel-price on application.

NUT PILOT PROJECTION

10

Easy Spot®


Easy Spot “21” Metric Spot Weld Nuts have two ribbed projections for equal welding strength. The depth of pilot prevents shunting, eliminating the necessity of retapping damaged threads, and provides additional thread depth.

“21” Metric Spot Weld Nuts

“21” Metric


R

Easy Spot “21” Metric Spot Weld Nuts have two ribbed projections for equal welding strength. The depth of pilot prevents shunting, eliminating the necessity of re-tapping damaged threads, and provides additional thread depth.

Part Number

Size Width “W”

Thick-ness “T”

Length “L”

Diame-ter

“PD”

Height “PH”

Projec-tion

Width “A”

Projection Height

“B”

Projection Length

“C”

Sheet Hole

21-04016 M4 X 0.7 9.4/9.9 2.3/2.5 15.6/16.4 4.9/5.4 0.7/1.1 2.25/2.50 0.25/0.36 2.0/2.8 5.6

21-05016 M5 X 0.8 9.4/9.9 2.3/2.5 15.6/16.4 5.7/6.2 0.7/1.1 2.25/2.50 0.25/0.36 2.0/2.8 6.4

21-06020 M6 X 1.0 12.7/13.4 3.1/3.3 20.2/21.0 7.3/7.8 1.1/1.5 3.05/3.30 0.53/0.64 2.8/3.6 8.0

21-08025 M8 X 1.25 15.7/16.4 3.5/3.7 24.6/25.4 8.9/9.4 1.9/2.3 3.05/3.30 0.63/0.74 3.2/4.0 9.6

21-10025 M10 X 1.5 15.7/16.4 3.5/3.7 24.6/25.4 11.5/12.0 2.3/2.7 3.05/3.30 0.63/0.74 3.2/4.0 12.2

21-12028 M12 X 1.75 18.6/20.3 4.7/4.9 27.6/28.4 13.7/14.2 2.3/2.7 3.05/3.30 0.66/0.77 3.6/4.4 14.4

All dimensions are in millimeters. All Parts are Available with Plating: Zinc, Zinc & Yellow, Copper Flash Also available in Stainless Steel-price on application


Part Number

Size Width “W”

Thickness “T”

Length “L”

Diame-ter

“PD”

Height “PH”

Projec-tion

Width “A”

Projection Height

“B”

Sheet Hole

24-1110 6-32 .433/.453 .091/.097 .610/.640 .178/.198 .026/.042 .085/.095 .013/.017 .203

24-1410 8-32 .433/.453 .091/.097 .610/.640 .193/.213 .026/.042 .085/.095 .013/.017 .219

24-1510 10-24 .433/.453 .091/.097 .610/.640 .224/.244 .026/.042 .085/.095 .013/.017 .250

24-1710 10-32 .433/.453 .091/.097 .610/.640 .224/.244 .026/.042 .085/.095 .013/.017 .250

24-2113 1/4-20 .495/.520 .091/.097 .797/.827 .272/.307 .026/.042 .120/.130 .018/.022 .312

24-2716 5/16-18 .620/.655 .122/.128 .969/.999 .349/.369 .076/.092 .145/.155 .025/.035 .375

24-2816 5/16-24 .620/.655 .122/.128 .969/.999 .349/.369 .076/.092 .145/.155 .025/.035 .375

24-3316 3/8-16 .620/.655 .122/.128 .969/.999 .428/.448 .086/.102 .145/.155 .025/.035 .453

24-3416 3/8-24 .620/.655 .122/.128 .969/.999 .428/.448 .086/.102 .145/.155 .025/.035 .453

24-4420 1/2-13 .734/.797 .184/.190 1.234/1.266 .569/.599 .086/.102 .166/.176 .030/.040 .609

24-4620 1/2-20 .734/.797 .184/.190 1.234/1.266 .569/.599 .086/.102 .166/.176 .030/.040 .609

“24” Inch


R

Easy Spot “24” Inch Projection Weld Nuts have four precision projections positioned to provide proper seating for maximum weld strength. The large weld area provides for a high strength weld. The depth of pilot prevents shunting, eliminating the necessity of re-tapping damaged threads and provides additional thread depth.

NUT Pilot



Easy Spot® “24” Inch Spot Weld Nuts

Easy Spot “24” Inch Projection Weld Nuts have four precision projections positioned to provide proper seating for maximum weld strength. The large weld area provides for a high strength weld. The depth of pilot prevents shunting, eliminating the necessity of retapping damaged threads and provides additional thread depth.

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diame-ter

“PD”

Height “PH”

Projec-tion

Width “A”

Projection Height

“B”

Sheet Hole

24-1110 6-32 .433/.453 .091/.097 .610/.640 .178/.198 .026/.042 .085/.095 .013/.017 .203

24-1410 8-32 .433/.453 .091/.097 .610/.640 .193/.213 .026/.042 .085/.095 .013/.017 .219

24-1510 10-24 .433/.453 .091/.097 .610/.640 .224/.244 .026/.042 .085/.095 .013/.017 .250

24-1710 10-32 .433/.453 .091/.097 .610/.640 .224/.244 .026/.042 .085/.095 .013/.017 .250

24-2113 1/4-20 .495/.520 .091/.097 .797/.827 .272/.307 .026/.042 .120/.130 .018/.022 .312

24-2716 5/16-18 .620/.655 .122/.128 .969/.999 .349/.369 .076/.092 .145/.155 .025/.035 .375

24-2816 5/16-24 .620/.655 .122/.128 .969/.999 .349/.369 .076/.092 .145/.155 .025/.035 .375

24-3316 3/8-16 .620/.655 .122/.128 .969/.999 .428/.448 .086/.102 .145/.155 .025/.035 .453

24-3416 3/8-24 .620/.655 .122/.128 .969/.999 .428/.448 .086/.102 .145/.155 .025/.035 .453

24-4420 1/2-13 .734/.797 .184/.190 1.234/1.266 .569/.599 .086/.102 .166/.176 .030/.040 .609

24-4620 1/2-20 .734/.797 .184/.190 1.234/1.266 .569/.599 .086/.102 .166/.176 .030/.040 .609

“24” Inch


R

Easy Spot “24” Inch Projection Weld Nuts have four precision projections positioned to provide proper seating for maximum weld strength. The large weld area provides for a high strength weld. The depth of pilot prevents shunting, eliminating the necessity of re-tapping damaged threads and provides additional thread depth.

NUT Pilot


12

Easy Spot®


“25” Metric Spot Weld Nuts

Part Number

Size Width “W”

Thick-ness “T”

Length “L”

Diame-ter

“PD”

Height “PH”

Projec-tion

Width “A”

Projection Height

“B”

Sheet Hole

25-04016 M4 X 0.7 10.8/11.3 2.3/2.5 15.6/16.4 4.9/5.4 0.7/1.1 2.15/2.40 0.33/0.44 5.6

25-05016 M5 X 0.8 10.8/11.3 2.3/2.5 15.6/16.4 5.7/6.2 0.7/1.1 2.15/2.40 0.33/0.44 6.4

25-06020 M6 X 1.0 12.7/13.5 2.3/2.5 20.1/20.9 6.9/7.4 1.1/1.5 3.05/3.30 0.45/0.56 7.6

25-08025 M8 X 1.25 15.7/16.5 3.1/3.3 24.6/25.4 8.9/9.4 1.9/2.3 3.70/3.95 0.71/0.82 9.6

25-10025 M10 X 1.5 15.7/16.5 3.1/3.3 24.6/25.4 10.9/11.4 2.3/2.7 3.70/3.95 0.71/0.82 12.2

25-12032 M12 X 1.75 18.6/20.3 4.9/7.9 31.6/32.4 13.7/14.2 2.3/2.7 4.25/4.50 0.86/0.97 14.4

“25” Metric

Easy Spot “25” Metric Spot Weld Nuts

R

Easy Spot “25” Metric Projection Weld Nuts have four precision projections positioned to provide proper seating for maximum weld strength. The large weld area provides for a high strength weld. The depth of pilot prevents shunting, eliminating the necessity of re-tapping damaged threads and provides additional thread depth.

All dimensions are in millimeters. All Parts are Available with Plating: Zinc, Zinc & Yellow, Copper Flash Also available in Stainless Steel-price on application

NUT PILOT

Easy Spot “25” Metric Projection Weld Nuts have four precision projections positioned to provide proper seating for maximum weld strength. The large weld area provides for a high strength weld. The depth of pilot prevents shunting, eliminating the necessity of retapping damaged threads and provides additional thread depth.


Easy Spot® “26” Inch & “27” Metric Spot Weld Nuts

Part Number

Size Width “W”

Thickness “T”

Length “L”

Diame-ter

“PD”

Height “PH”

Projec-tion

Width “A”

Projection Height

“B”

To End

“PE”

Sheet Hole

26-1109 6-32 .433/.453 .091/.097 .610/.640 .178/.198 .026/.042 .183/.193 .010/.014 .172/.202 .203

26-1409 8-32 .433/.453 .091/.097 .610/.640 .193/.213 .026/.042 .183/.193 .010/.014 .172/.202 .219

26-1510 10-24 .433/.453 .091/.097 .610/.640 .224/.244 .026/.042 .183/.193 .010/.014 .172/.202 .250

26-1710 10-32 .433/.453 .091/.097 .610/.640 .224/.244 .026/.042 .183/.193 .010/.014 .172/.202 .250

26-2113 1/4-20 .495/.520 .122/.128 .797/.827 .287/.307 .046/.062 .214/.224 .021/.025 .235/.265 .312

26-2213 1/4-28 .495/.520 .122/.128 .797/.827 .287/.307 .046/.062 .214/.224 .021/.025 .235/.265 .312

26-2716 5/16-18 .620/.655 .138/.145 .969/.999 .349/.369 .076/.092 .307/.317 .025/.029 .266/.296 .375

26-3318 3/8-16 .620/.655 .138/.145 1.110/1.140 .428/.448 .086/.102 .307/.317 .025/.029 .329/.359 .453

26-3418 3/8-24 .620/.655 .138/.145 1.110/1.140 .428/.448 .086/.102 .307/.317 .025/.029 .329/.359 .453

“26” Inch

Easy Spot “26” Inch & “27” Metric Spot Weld Nuts

R

Easy Spot “26” Inch & 27 Metric Projection Weld Nuts have a large single projection, making them ideal for use with heavier gauge material., flat and curved services. The self locating pilot assists po-sitioning of the nut and provides extra thread depth

Part Number

Size Width “W”

Thick-ness “T”

Length “L”

Diameter “PD”

Height “PH”

Projec-tion

Width “A”

Projection Height

“B”

To End

“PE”

Sheet Hole

27-04016 M4 x 0.7 10.8/11.3 2.3/2.5 15.6/16.4 4.9/5.4 0.7/1.1 4.65/4.90 0.25/0.36 4.40/5.20 5.6

27-05016 M5 x 0.8 10.8/11.3 2.3/2.5 15.6/16.4 5.7/6.2 0.7/1.1 4.65/4.90 0.25/0.36 4.40/5.20 6.4

27-06020 M6 x 1.0 12.7/13.4 3.1/3.3 20.2/21.0 7.3/7.8 1.1/1.5 5.45/5.70 0.53/0.64 6.00/6.80 8.0

27-08025 M8 x 1.25 15.7/16.4 3.5/3.7 24.6/25.4 8.9/9.4 1.9/2.3 7.80/8.05 0.63/0.74 6.70/7.50 9.6

27-10028 M10 x 1.5 15.7/16.4 3.5/3.7 28.1/28.9 11.5/12.0 2.3/2.7 7.80/8.05 0.63/0.74 8.30/9.10 12.2

“27” Metric



All dimensions are in inches.

All dimensions are in millimeters

All parts available to be plated: Zinc, Zinc & Yellow, Copper Flashed. Also available in Stainless Steel.

All parts available to be plated: Zinc, Zinc & Yellow, Copper Flashed. Also available in Stainless Steel.

Easy Spot “26” Inch & 27 Metric Projection Weld Nuts have a large single projection, making them ideal for use with heavier gauge material, flat and curved surfaces. The self locating pilot assists positioning of the nut and provides extra thread depth.

14

Easy Spot®


“36” Inch Hex Piloted Projection Weld Nuts

3 PROJEC-

TION

6 PROJECTION

Size Width “W”

Thickness “T”

Across Corners

Min “AC”

Diameter “PD”

Height “PH”

Projection Height

“B”

Sheet Hole

36-2104-3 36-2104-6 1/4-20 .489/.500 .178/.188 .556 .394/.406 .080/.090 .037/.043 .422

36-2204-3 36-2204-6 1/4-28 .489/.500 .178/.198 .556 .394/.406 .080/.090 .037/.043 .422

36-2705-3 36-2705-6 5/16-18 .551/.562 .209/.219 .624 .457/.469 .080/.090 .037/.043 .484

36-2805-3 36-2805-6 5/16-24 .551/.562 .209/.219 .624 .457/.469 .080/.090 .037/.043 .484

36-3306-3 36-3306-6 3/8-16 .612/.625 .240/.260 .691 .519/.531 .080/.090 .037/.043 .547

36-3406-3 36-3406-6 3/8-24 .612/.625 .240/.260 .691 .519/.531 .080/.090 .037/.043 .547

36-3807-3 36-3807-6 7/16-14 .736/.750 .302/.322 .830 .644/.656 .080/.090 .037/.043 .672

36-3907-3 36-3907-6 7/16-20 .736/.750 .302/.322 .830 .644/.656 .080/.090 .037/.043 .672

36-4408-3 36-4408-6 1/2-13 .781/.812 .302/.322 .898 .707/.719 .080/.090 .037/.043 .734

36-4608-3 36-4608-6 1/2-20 .781/.812 .365/.385 .898 .707/.719 .080/.090 .037/.043 .734

36-5609-3 36-5609-6 5/8-11 .909/.938 .428/.448 1.051 .769/.781 .080/.090 .037/.043 .797

36-5809-3 36-5809-6 5/8-18 .909/.938 .428/.448 1.051 .769/.781 .080/.090 .037/.043 .797

“36” Inch Type ‘E’ Standard Pilot

Easy Spot “36” Inch Hex Piloted Projection Weld Nuts

R

Easy Spot “36” Inch Hex Projection Weld Nuts are available with either three (3) or six (6) preci-sion projections. The self locating pilot guides the nuts for automatic or hand feeding and protects the threads from possible weld splatter.

All dimensions are in inches When ordering please specify 3 or 6 projection style All nuts meet Property Grade 5 specifications.

All parts are available to be plated: Zinc, Zinc & Yellow, or Copper Flashed

PART NUMBER NUT PILOT

Easy Spot “36” Inch Hex Projection Weld Nuts are available with either three (3) or six (6) precision projections. The self-locating pilot guides the nuts for automatic or hand feeding and protects the threads from possible weld splatter.


Easy Spot® “38” Inch Hex Piloted Projection Weld Nuts

Easy Spot “38” Inch Hex Projection Weld Nuts are available with either three (3) or six (6) precision projections. The self locating pilot guides the nuts for automatic or hand feeding and protects the threads from possible weld splatter.

3 PROJECTION

6 PROJECTION

Size Width “W”

Thickness “T”

Across Corners

Min “AC”

Diameter “PD”

Height “PH”

Projection Height

“B”

Sheet Hole

38-2104-3 38-2104-6 1/4-20 .489/.500 .178/.198 .556 .394/.406 .035/.045 .022/.028 .422

38-2204-3 38-2204-6 1/4-28 .489/.500 .178/.198 .556 .394/.406 .035/.045 .022/.028 .422

38-2705-3 38-2705-6 5/16-18 .551/.562 .208/.228 .624 .457/.469 .035/.045 .022/.028 .484

38-2805-3 38-2805-6 5/16-24 .551/.562 .208/.228 .624 .457/.469 .035/.045 .022/.028 .484

38-3306-3 38-3306-6 3/8-16 .612/.625 .240/.260 .691 .519/.531 .045/.055 .027/.033 .547

38-3406-3 38-3406-6 3/8-24 .612/.625 .240/.260 .691 .519/.531 .045/.055 .027/.033 .547

38-3807-3 38-3807-6 7/16-14 .736/.750 .302/.322 .830 .644/.656 .045/.055 .027/.033 .672

38-3907-3 38-3907-6 7/16-20 .736/.750 .302/.322 .830 .644/.656 .045/.055 .027/.033 .672

38-4408-3 38-4408-6 1/2-13 .781/.812 .365/.385 .898 .707/.719 .055/.065 .032/.038 .734

38-4608-3 38-4608-6 1/2-20 .781/.812 .365/.385 .898 .707/.719 .055/.065 .032/.038 .734

38-5609-3 38-5609-6 5/8-11 .909/.938 .428/.448 1.051 .769/.781 .055/.065 .032/.038 .797

38-5809-3 38-5809-6 5/8-18 .909/.938 .428/.448 1.051 .769/.781 .055/.065 .032/.038 .797

“38” Inch Type ‘E’ Short Pilot

Easy Spot “38” Inch Hex Piloted Projection Weld Nuts

R

Easy Spot “38” Inch Hex Projection Weld Nuts are available with either three (3) or six (6) preci-sion projections. The self locating pilot guides the nuts for automatic or hand feeding and protects the threads from possible weld splatter.


All dimensions are in inches. When ordering please specify 3 or 6 projection style All nuts meet Property Grade 5 specifications.

NUT PILOT PART NUMBER

16

Easy Spot®


“37” & “39” MetricHex Piloted Projection Weld Nut

Easy Spot “37” and “39” Metric Hex Projection Weld Nuts are available with either three (3) or six (6) precision projections. The self-locating pilot guides the nuts for automatic or hand feeding and protects the threads from possible weld splatter.

3 PROJECTION

6 PROJECTION

Size Width “W”

Thickness “T”

Across Corners

Min “AC”

Diameter “PD”

Height “PH”

Projection Height

“B”

Sheet Hole

37-06013-3 37-06013-6 M6 X 1.0 12.73/13.00 5.10/5.60 14.38 8.80/9.10 1.47/1.73 0.72/0.88 9.50

37-08015-3 37-08015-6 M8 X 1.25 14.73/15.00 6.60/7.10 16.61 10.80/11.10 1.67/1.93 0.92/1.08 11.50

37-10018-3 37-10018-6 M10 X 1.50 17.73/18.00 7.70/8.20 20.03 13.30/13.60 1.67/1.93 0.92/1.08 14.00

37-12021-3 37-12021-6 M12 X 1.75 20.67/21.00 9.40/9.90 23.35 15.80/16.10 1.67/1.93 0.92/1.08 16.50

37-14024-3 37-14024-6 M14 X 2.0 23.67/24.00 11.00/11.50 26.75 18.80/19.10 1.67/1.93 0.92/1.08 19.50

“37” Metric Type ‘E’ Standard Pilot

Easy Spot “37” & “39” Metric R

Easy Spot “37” and “39” Metric Hex Projection Weld Nuts are available with either three (3) or six (6) precision projections. The self locating pilot guides the nuts for automatic or hand feed-ing and protects the threads from possible weld splatter.

3 PROJECTION

6 PROJECTION

Size Width “W”

Thickness “T”

Across Corners

Min “AC”

Diameter “PD”

Height “PH”

Projection Height

“B”

Sheet Hole

39-06013-3 39-06013-6 M6 X 1.0 12.73/13.00 5.10/5.60 14.38 8.80/9.10 0.87/1.13 0.36/0.52 9.50

39-08015-3 39-08015-6 M8 X 1.25 14.73/15.00 6.60/7.10 16.61 10.80/11.10 0.87/1.13 0.36/0.52 11.50

39-10018-3 39-10018-6 M10 X 1.50 17.73/18.00 7.70/8.20 20.03 13.30/13.60 1.03/1.29 0.47/0.63 14.00

39-12021-3 39-12021-6 M12 X 1.75 20.67/21.00 9.40/9.90 23.35 15.80/16.10 1.13/1.39 0.57/0.73 16.50

39-14024-3 39-14024-6 M14 X 2.0 23.67/24.00 11.00/11.50 26.75 18.80/19.10 1.13/1.39 0.57/0.73 19.50

“39” Metric Type ‘E’ Short Pilot

All dimensions are in millimeters. When ordering please specify 3 or 6 projection style All nuts meet Property Class 9 specifications.


Hex Piloted Projection Weld Nut




Easy Spot® “40” Inch Piloted Square Projection Weld NutsEasy-Spot "40" Inch Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading.The self-locating pilot guides the nut for automatic or hand feeding and protects the threads from possible weld spatter.

Part Number

Size Width “W”

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

40-2104 1/4-20 .489/.500 .117/.133 .399/.406 .089/.099 .042/.052 .422

40-2105 1/4-20 .551/.562 .179/.195 .462/.469 .089/.099 .042/.052 .485

40-2204 1/4-28 .489/.500 .117/.133 .399/.406 .089/.099 .042/.052 .422

40-2705 5/16-18 .551/.562 .179/.195 .462/.469 .089/.099 .042/.052 .485

40-2805 5/16-24 .551/.562 .179/.195 .462/.469 .089/.099 .042/.052 .485

40-3306 3/8-16 .612/.625 .242/.258 .524/.531 .089/.099 .042/.052 .547

40-3406 3/8-24 .612/.625 .242/.258 .524/.531 .089/.099 .042/.052 .547

40-3807 7/16-14 .736/.750 .304/.320 .649/.656 .089/.099 .042/.052 .672

40-3907 7/16-20 .736/.750 .304/.320 .649/.656 .089/.099 .042/.052 .672

40-4408 1/2-13 .788/.812 .367/.383 .712/.719 .089/.099 .042/.052 .735

40-4608 1/2-20 .788/.812 .367/.383 .712/.719 .089/.099 .042/.052 .735

40-5009 9/16-12 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

40-5209 9/16-18 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

40-5609 5/8-11 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

40-5809 5/8-18 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

“40” Inch Type ‘F’ Standard Pilot

Easy Spot “40” Inch Piloted Square Projection Weld Nuts

R

Easy Spot “40”Inch Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self locating pilot guides the nut for automatic or hand feeding and protects the threads from pos-

All dimensions are in inches All nuts meet Grade 5 specifications.


PAULIN IS ALSO CAPABLE OF PROVIDING TYPE “A”, TYPE “AA”, AND TYPE “AM” STYLE SQUARE PROJECTIONS WELD NUTS.

NUT PILOT

Part Number

Size Width “W”

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

40-2104 1/4-20 .489/.500 .117/.133 .399/.406 .089/.099 .042/.052 .422

40-2105 1/4-20 .551/.562 .179/.195 .462/.469 .089/.099 .042/.052 .485

40-2204 1/4-28 .489/.500 .117/.133 .399/.406 .089/.099 .042/.052 .422

40-2705 5/16-18 .551/.562 .179/.195 .462/.469 .089/.099 .042/.052 .485

40-2805 5/16-24 .551/.562 .179/.195 .462/.469 .089/.099 .042/.052 .485

40-3306 3/8-16 .612/.625 .242/.258 .524/.531 .089/.099 .042/.052 .547

40-3406 3/8-24 .612/.625 .242/.258 .524/.531 .089/.099 .042/.052 .547

40-3807 7/16-14 .736/.750 .304/.320 .649/.656 .089/.099 .042/.052 .672

40-3907 7/16-20 .736/.750 .304/.320 .649/.656 .089/.099 .042/.052 .672

40-4408 1/2-13 .788/.812 .367/.383 .712/.719 .089/.099 .042/.052 .735

40-4608 1/2-20 .788/.812 .367/.383 .712/.719 .089/.099 .042/.052 .735

40-5009 9/16-12 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

40-5209 9/16-18 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

40-5609 5/8-11 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

40-5809 5/8-18 .861/.880 .429/.445 .774/.781 .089/.099 .042/.052 .797

“40” Inch Type ‘F’ Standard Pilot


R

Easy Spot “40”Inch Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self locating pilot guides the nut for automatic or hand feeding and protects the threads from pos-




NUT PILOT

18

Easy Spot®


“42” Inch Piloted Square Projection Weld NutsEasy Spot “42”Inch Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self-locating pilot guides the nut for automatic or hand feeding and protects the threads from possible weld splatter.

Part Number

Size Width “W”

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

42-2103 1/4-20 .489/.500 .148/.164 .399/.406 .057/.067 .032/.042 .422

42-2104 1/4-20 .489/.500 .148/.164 .399/.406 .057/.067 .032/.042 .422

42-2204 1/4-28 .489/.500 .148/.164 .399/.406 .057/.067 .032/.042 .422

42-2704 5/16-18 .551/.562 .179/.195 .462/.469 .057/.067 .032/.042 .485

42-2804 5/16-24 .551/.562 .179/.195 .462/.469 .057/.067 .032/.042 .485

42-3305 3/8-16 .612/.625 .242/.258 .524/.531 .057/.067 .032/.042 .547

42-3405 3/8-24 .612/.625 .242/.258 .524/.531 .057/.067 .032/.042 .547

42-3806 7/16-14 .736/.750 .304/.320 .649/.656 .057/.067 .032/.042 .672

42-3906 7/16-20 .736/.750 .304/.320 .649/.656 .057/.067 .032/.042 .672

42-4407 1/2-13 .788/.812 .367/.383 .712/.719 .057/.067 .032/.042 .735

42-4607 1/2-20 .788/.812 .367/.383 .712/.719 .057/.067 .032/.042 .735

42-5008 9/16-12 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

42-5208 9/16-18 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

42-5608 5/8-11 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

42-5808 5/8-18 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

“42” Inch Type ‘F’ Short Pilot


R

Easy Spot “42”Inch Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self locating pilot guides the nut for automatic or hand feeding and protects the threads from possible weld splatter.




NUT PILOT

Part Number

Size Width “W”

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

42-2103 1/4-20 .489/.500 .148/.164 .399/.406 .057/.067 .032/.042 .422

42-2104 1/4-20 .489/.500 .148/.164 .399/.406 .057/.067 .032/.042 .422

42-2204 1/4-28 .489/.500 .148/.164 .399/.406 .057/.067 .032/.042 .422

42-2704 5/16-18 .551/.562 .179/.195 .462/.469 .057/.067 .032/.042 .485

42-2804 5/16-24 .551/.562 .179/.195 .462/.469 .057/.067 .032/.042 .485

42-3305 3/8-16 .612/.625 .242/.258 .524/.531 .057/.067 .032/.042 .547

42-3405 3/8-24 .612/.625 .242/.258 .524/.531 .057/.067 .032/.042 .547

42-3806 7/16-14 .736/.750 .304/.320 .649/.656 .057/.067 .032/.042 .672

42-3906 7/16-20 .736/.750 .304/.320 .649/.656 .057/.067 .032/.042 .672

42-4407 1/2-13 .788/.812 .367/.383 .712/.719 .057/.067 .032/.042 .735

42-4607 1/2-20 .788/.812 .367/.383 .712/.719 .057/.067 .032/.042 .735

42-5008 9/16-12 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

42-5208 9/16-18 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

42-5608 5/8-11 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

42-5808 5/8-18 .861/.880 .429/.445 .774/.781 .057/.067 .032/.042 .797

“42” Inch Type ‘F’ Short Pilot


R

Easy Spot “42”Inch Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self locating pilot guides the nut for automatic or hand feeding and protects the threads from possible weld splatter.




NUT PILOT


Easy Spot® “41” & “43” MetricPiloted Square Projection Weld NutsEasy Spot “41” and “43” Metric Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self-locating pilot guides the nut for automatic or hand feeding and protects the threads frompossible weld spatter.

Part Number

Size Width “W” MAX

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

41-06013 M6 X 1.0 13.0 5.10/5.60 8.80/9.10 1.47/1.73 0.82/0.98 9.25/9.53

41-08015 M8 X 1.25 15.0 6.60/7.10 10.80/11.10 1.57/1.83 0.92/1.08 11.25/11.53

41-10018 M10 X 1.50 18.0 7.70/8.20 13.30/13.60 1.67/1.93 1.02/1.18 13.75/14.03

41-12021 M12 X 1.75 21.0 9.40/9.90 15.80/16.10 1.67/1.93 1.02/1.18 16.25/16.53

41-14024 M14 X 2.0 24.0 11.00/11.50 18.80/19.10 1.67/1.93 1.02/1.18 19.25/19.53

“41” Metric Type ‘F’ Standard Pilot

Easy Spot “41” & “43” Metric Square Piloted Projection Weld Nuts

R

Easy Spot “41” and “43” Metric Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self locating pilot guides the nut for automatic or hand feeding and protects the threads from possible weld spatter.

Part Number

Size Width “W”

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

43-06013 M6 X 1.0 13.0 5.10/5.60 8.80/9.10 0.87/1.13 0.36/0.52 9.25/9.53

43-08015 M8 X 1.25 15.0 6.60/7.10 10.80/11.10 0.97/1.23 0.42/0.58 11.25/11.53

43-10018 M10 X 1.50 18.0 7.70/8.20 13.30/13.60 1.07/1.33 0.52/0.68 13.75/14.03

43-12021 M12 X 1.75 21.0 9.40/9.90 15.80/16.10 1.17/1.43 0.62/0.78 16.25/16.53

43-14024 M14 X 2.0 24.0 11.00/11.50 18.80/19.10 1.17/1.43 0.62/0.78 19.25/19.53

“43” Metric Type ‘F’ Short Pilot

All dimensions are in millimeters. All nuts meet Property Class 9 specifications.



NUT PILOT

NUT PILOT

Part Number

Size Width “W” MAX

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

41-06013 M6 X 1.0 13.0 5.10/5.60 8.80/9.10 1.47/1.73 0.82/0.98 9.25/9.53

41-08015 M8 X 1.25 15.0 6.60/7.10 10.80/11.10 1.57/1.83 0.92/1.08 11.25/11.53

41-10018 M10 X 1.50 18.0 7.70/8.20 13.30/13.60 1.67/1.93 1.02/1.18 13.75/14.03

41-12021 M12 X 1.75 21.0 9.40/9.90 15.80/16.10 1.67/1.93 1.02/1.18 16.25/16.53

41-14024 M14 X 2.0 24.0 11.00/11.50 18.80/19.10 1.67/1.93 1.02/1.18 19.25/19.53

“41” Metric Type ‘F’ Standard Pilot

Easy Spot “41” & “43” Metric Square Piloted Projection Weld Nuts

R

Easy Spot “41” and “43” Metric Square Weld Nuts have four precision projections to assure level positioning to eliminate cross threading. The self locating pilot guides the nut for automatic or hand feeding and protects the threads from possible weld spatter.

Part Number

Size Width “W”

Thickness “T”

Diameter “PD”

Height “PH”

Projection Height

“B”

Pilot Hole

43-06013 M6 X 1.0 13.0 5.10/5.60 8.80/9.10 0.87/1.13 0.36/0.52 9.25/9.53

43-08015 M8 X 1.25 15.0 6.60/7.10 10.80/11.10 0.97/1.23 0.42/0.58 11.25/11.53

43-10018 M10 X 1.50 18.0 7.70/8.20 13.30/13.60 1.07/1.33 0.52/0.68 13.75/14.03

43-12021 M12 X 1.75 21.0 9.40/9.90 15.80/16.10 1.17/1.43 0.62/0.78 16.25/16.53

43-14024 M14 X 2.0 24.0 11.00/11.50 18.80/19.10 1.17/1.43 0.62/0.78 19.25/19.53

“43” Metric Type ‘F’ Short Pilot

All dimensions are in millimeters. All nuts meet Property Class 9 specifications.



NUT PILOT

NUT PILOT

20

Easy Spot®


Easy Spot “50”Inch Weld Screws have three precision projections located 120 degrees apart, under the head. Recommended for through hole applications.

“50” Inch Projection Weld Screws

Thread Size 6-32 8-32 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 1/2-13

“HD” Head Diameter .303/.323 .365/.385 .428/.448 .428/.448 .550/.575 .550/.575 .725/.755 .725/.755 .850/.880 .850/.880 .975/1.005

“HT” Head Thickness .042/.052 .058/.068 .058/.068 .075/.085 .073/.083 .073/.083 .089/.099 .089/.099 .104/.114 .104/.114 .136/.146

“A” Projection Diame-

ter .045/.055 .065/.075 .075/.085 .075/.085 .095/.105 .095/.105 .115/.125 .115/.125 .125/.135 .125/.135 .145/.156

“B” Projection Height .018/.022 .023/.027 .028/.032 .028/.032 .038/.042 .038/.042 .043/.047 .043/.047 .048/.052 .048/.052 .058/.062

“50” Inch

Easy Spot “50” Inch Projection Weld Screws

R

Easy Spot “50”Inch Weld Screws have three precision projections located 120 degrees apart, under the head. Recommended for through hole applications.

Length Tolerance

Length “L” Under Head

Part Number

Under 1” +.000 -.031

1”-2” +.000 -.062

Over 2” +.000 -.093

1/4 50-1104 50-1404

5/16 50-1105 50-1405

3/8 50-1106 50-1406 50-1506 50-1606 50-2106

1/2 50-1108 50-1408 50-1508 50-1608 50-2108 50-2208 50-2708 50-3308

9/16 50-1609

5/8 50-1110 50-1410 50-1510 50-1610 50-2110 50-2210 50-2710 50-2810

3/4 50-1112 50-1412 50-1512 50-1612 50-2112 50-2212 50-2712 50-2812 50-3312 50-3412

7/8 50-1114 50-1614 50-2114 50-2714 50-3314 50-3414

1 50-1116 50-1416 50-1516 50-1616 50-2116 50-2216 50-2716 50-2816 50-3316 50-3416 50-4416

1 1/4 50-1420 50-1520 50-1620 50-2120 50-2720 50-3320 50-3420 50-4420

1 1/2 50-1424 50-1524 50-1624 50-2124 50-2724 50-2824 50-3324 50-3424 50-4424

1 3/4 50-2128 50-3328 50-3428 50-4428

2 50-1532 50-2132 50-2732 50-3332 50-3432

3 50-1548 50-2148

All dimensions are in inches Also available in Stainless Steel-price on application

All parts are available to be plated: Zinc, Zinc & Yellow, or Copper Flash

**Also available in Metric “51” Series**


Easy Spot® “52” Inch Projection Weld Screw

Easy Spot “52”Inch Weld Screws have three precision sausage shaped projections located 120 degrees apart, under the head. This type of projection provides a high strength weld.

Thread Size 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24

“HD” Head Diameter .687/.717 .687/.717 .750/.780 .750/.780 .875/.905 .875/.905

“HT” Head Thickness .073/.083 .073/.083 .088/.098 .088/.098 .104/.114 .104/.114

“A” Projection Diameter .08/.10 .08/.10 .08/.10 .08/.10 .11/.13 .11/.13

“B” Projection Height .030/.035 .030/.035 .030/.035 .030/.035 .035/.040 .035/.040

“C” Projection Length .17/.21 .17/.21 .23/.27 .23/.27 .23/.27 .23/.27

Locating Diameter Circle “D” (Ref.) .54 .54 .60 .60 .70 .70

“52” Inch

Easy Spot “52” Inch Projection Weld Screw

R

Easy Spot “52”Inch Weld Screws have three precision sausage shaped projections located 120 degrees apart, under the head. This type of projection provides a high strength weld.

Length Tolerance


Part Number

Under 1” +.000 -.031

1”-2” +.000 -.062

Over 2” +.000 -.093

3/8

1/2

5/8

3/4

1 52-2112 52-2712

1 1/8 52-2116 52-2216 52-2716 52-3316

1 1/4 52-2718

1 1/2 52-2120 52-2820

1 3/4 52-2724 52-3324 52-3424

2




22

Easy Spot®


“54” Inch Projection Weld ScrewEasy Spot “54”Inch Weld Screws have three precision projections located 120 degrees apart, on top of the head, eliminating the need for holes in the mating surface. Recommend where appearance is a requirement or where a hole in the mating surface is not desirable.

Thread Size 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16

“HD” Head Diameter .240/.260 .303/.323 .365/.385 .365/.385 .485/.510 .605/.630 .725/.755

“HT” Head Thickness .036/.046 .042/.052 .058/.068 .058/.068 .073/.083 .089/.099 .104/.114

“A” Projection Diameter .045/.055 .065/.075 .075/.085 .075/.085 .095/.105 .115/.125 .125/.135

“B” Projection Height .018/.022 .023/.027 .028/.032 .028/.032 .038/.042 .043/.047 .048/.052

“54” Inch


R

Easy Spot “54”Inch Weld Screws have three precision projections located 120 degrees apart, on top of the head, eliminating the need for holes in the mating sur-face. Recommend where appearance is a requirement or where a hole in the mating surface is not desirable

Length Tolerance


Part Number

Under 1” +.000 -.031

1”-2” +.000 -.062

Over 2” +.000 -.093

1/4 54-1104 54-1404

5/16 54-1105 54-1405

3/8 54-1106 54-1406 54-1506 54-1606 54-2106

1/2 54-1108 54-1408 54-1508 54-1608 54-2108

5/8 54-1110 54-1410 54-1510 54-1610 54-2110 54-2710

3/4 54-1112 54-1412 54-1512 54-1612 54-2112 54-2712 54-3312

7/8 54-1114 54-1414 54-2114

1 54-1116 54-1416 54-1516 54-1616 54-2116 54-2716 54-3316

1 1/4 54-1420 54-1520 54-2120 54-2720

1 1/2 54-1524 54-1624 54-2124 54-2724 54-3324

1 3/4 54-1628 54-2128 54-2728 54-3328

2 54-2732 54-3332

2 1/4 54-3336




Thread Size 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16

“HD” Head Diameter .240/.260 .303/.323 .365/.385 .365/.385 .485/.510 .605/.630 .725/.755




“54” Inch


R

Easy Spot “54”Inch Weld Screws have three precision projections located 120 degrees apart, on top of the head, eliminating the need for holes in the mating sur-face. Recommend where appearance is a requirement or where a hole in the mating surface is not desirable

Length Tolerance


Part Number

Under 1” +.000 -.031

1”-2” +.000 -.062

Over 2” +.000 -.093

1/4 54-1104 54-1404

5/16 54-1105 54-1405

3/8 54-1106 54-1406 54-1506 54-1606 54-2106

1/2 54-1108 54-1408 54-1508 54-1608 54-2108

5/8 54-1110 54-1410 54-1510 54-1610 54-2110 54-2710

3/4 54-1112 54-1412 54-1512 54-1612 54-2112 54-2712 54-3312

7/8 54-1114 54-1414 54-2114

1 54-1116 54-1416 54-1516 54-1616 54-2116 54-2716 54-3316

1 1/4 54-1420 54-1520 54-2120 54-2720

1 1/2 54-1524 54-1624 54-2124 54-2724 54-3324

1 3/4 54-1628 54-2128 54-2728 54-3328

2 54-2732 54-3332

2 1/4 54-3336





Easy Spot® “60” Inch Ring Projection Weld Screw

Easy Spot “60”Inch Projection Weld Screws have a 360 degree ring to provide a circular leak proof seal. The large weld area gives additional weld strength. The solid ring is also useful when welding to screening, perforated metal, tubing or cross wires.

Thread Size 6-32 8-32 10-32 1/4-20 5/16-18 3/8-16

“HD” Head Diameter .303/.323 .365/.385 .428/.448 .550/.575 .725/.755 .850/.880

“HT” Head Thickness .042/.052 .058/.068 .058/.068 .073/.083 .089/.099 .104/.114

“A” Projection Width

(Ref) .025 .031 .035 .048 .060 .068

“B” Projection Height .010/.015 .013/.018 .015/.020 .021/.027 .027/.033 .031/.037

“60” Inch

Easy Spot “60” Inch Ring Projection Weld Screw

R

Easy Spot “60”Inch Projection Weld Screws have a 360 degree ring to provide a circular leak proof seal. The large weld area gives additional weld strength. The solid ring is also useful when welding to screening, perforated metal, tubing or cross wires.

Length Tolerance


Part Number

Under 1” +.00 -.03

1”-2” +.00 -.06

3/8 60-1106 60-1406

1/2 60-1108 60-1408 60-1608 60-2108

5/8 60-2110 60-2710

3/4 60-1412 60-1612 60-2112 60-2712 60-3312

7/8 60-2114

1 60-1416 60-2116 60-2716 60-3316

1 1/4 60-1620 60-2120 60-2720 60-3320

2 60-2732 60-3332



**Also available in Metric**

24

Easy Spot®


“70” Inch Projection Spade ScrewsEasy Spot “70” Inch Spade Screws have two weld projections on the offset spade, enabling them to be welded to the edge of a mating component. They can be welded to curved surfaces and can be used for holding covers, cabinet doors or lids in place.

Thread Size 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16

“W” Spade Width (Ref.) .218 .250 .312 .343 .375 .437 .531

“T” Thickness .042/.052 .057/.067 .057/.067 .057/.067 .089/.099 .120/.130 .151/.161

“S” Spade Length (Ref.) .438 .500 .625 .625 .750 .875 1.000

“PD” Projection Diameter .095/.105 .105/.115 .120/.130 .120/.130 .155/.165 .175/.185 .215/.225

“PH” Projection Height .014/.020 .017/.023 .019/.025 .019/.025 .021/.027 .027/.033 .032/.038

“70” Inch

Easy Spot “70” Inch Projection Spade Screws

R

Easy Spot “70”Inch Spade Screws have two weld projections on the offset spade, enabling them to be welded to the edge of a mating component. They can be welded to curved surfaces and can be used for holding covers, cabinet doors or lids in place

Length Tolerance

Length “L” Under Head Part Number Minimum Thread

Length “TL”

Under 1” +.000 -.031

1”-2” +.000 -.062

Over 2” +.000 -.093

3/4 1/4 70-1112

7/8 5/16 70-1114

1 3/8 70-1416

1 1/4 9/16 70-1420

1 1/4 1/4 70-2120

1 1/2 5/8 70-1524 70-1624

1 1/2 1/2 70-2124

1 1/2 3/8 70-2724

1 3/4 3/4 70-2128

1 3/4 5/8 70-2728

1 3/4 1/2 70-3328

2 1 70-2132

2 5/8 70-3332

2 1/4 1 1/4 70-2136

2 1/2 1 1/8 70-3340

3 1 3/8 70-3348



**Also available in Metric **

Thread Size 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16

“W” Spade Width (Ref.) .218 .250 .312 .343 .375 .437 .531

“T” Spade Thickness .042/.052 .058/.068 .058/.068 .058/.068 .089/.099 .120/.130 .151/.161


“74” Inch

Easy Spot “74” Inch Projection Weld Screw R

Easy-Spot “74” Inch Spot Weld Screws have a flat spade at 90 degrees to the threads. The flat spade sur-face permits the use of various electrode tips often uti-lizing the same settings and equipment used for other spot welds. This part may be welded to or through oth-er metal surfaces. May be used in confined areas or where an offset is required.

Length Toler-ance

Length “L” (Overall)

Part Number

Under 1” +.000 -.031

1”-2” +.000 -.060

3/8 74-1406 74-1506 74-1606

1/2 74-1108 74-1408 74-1508 74-1608 74-2108

5/8 74-1410 74-1510 74-2110 74-2710

3/4 74-1412 74-1512 74-1612 74-2112 74-2712

7/8 74-2114

1 74-1416 74-1516 74-1616 74-2116 74-2716 74-3316

1 1/4 74-1520 74-2120 74-2720 74-3320

1 1/2 74-1424 74-1524 74-1624 74-2124 74-2724 74-3324

1 3/4 74-2128

2 74-1532 74-2132 74-2732

All dimensions are in inches Also Available in Stainless Steel– Price on application

All Product is available to be plated: Zinc, Zinc & Yellow, and Copper Flash


Easy Spot® “74” Inch Projection Weld Screw

Easy-Spot “74” Inch Spot Weld Screws have a flat spade at 90 degrees to the threads. The flat spade surface permits the use of various electrode tips often utilizing the same settings and equipment used for other spot welds. This part may be welded to or through other metal surfaces. May be used in confined areas or where an offset is required.

Thread Size 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16

“W” Spade Width (Ref.) .218 .250 .312 .343 .375 .437 .531

“T” Spade Thickness .042/.052 .058/.068 .058/.068 .058/.068 .089/.099 .120/.130 .151/.161


“74” Inch

Easy Spot “74” Inch Projection Weld Screw R

Easy-Spot “74” Inch Spot Weld Screws have a flat spade at 90 degrees to the threads. The flat spade sur-face permits the use of various electrode tips often uti-lizing the same settings and equipment used for other spot welds. This part may be welded to or through oth-er metal surfaces. May be used in confined areas or where an offset is required.

Length Toler-ance

Length “L” (Overall)

Part Number

Under 1” +.000 -.031

1”-2” +.000 -.060

3/8 74-1406 74-1506 74-1606

1/2 74-1108 74-1408 74-1508 74-1608 74-2108

5/8 74-1410 74-1510 74-2110 74-2710

3/4 74-1412 74-1512 74-1612 74-2112 74-2712

7/8 74-2114

1 74-1416 74-1516 74-1616 74-2116 74-2716 74-3316

1 1/4 74-1520 74-2120 74-2720 74-3320

1 1/2 74-1424 74-1524 74-1624 74-2124 74-2724 74-3324

1 3/4 74-2128

2 74-1532 74-2132 74-2732

All dimensions are in inches Also Available in Stainless Steel– Price on application


26

Easy Spot®


“75” Metric Projection Weld Screw

Easy-Spot “75” Metric Spot Weld Screws have a flat spade at 90 degrees to the threads. The flat spade surface permits the use of various electrode tips often utilizing the same settings and equipment used for other spot welds. This part may be welded to or through other metal surfaces. May be used in confined areas or where an offset is required.

Easy Spot “75” Metric Projection Weld Screw R

Easy-Spot “75” Metric Spot Weld Screws have a flat spade at 90 degrees to the threads. The flat spade sur-face permits the use of various electrode tips often uti-lizing the same settings and equipment used for other spot welds. This part may be welded to or through oth-er metal surfaces. May be used in confined areas or where an offset is required.

“75” Metric Thread Size M3 x 0.6 M4 x 0.7 M5 x 0.8 M6 x 1.0 M8 x 1.25 M10 x 1.5

“W” Spade Width (Ref.) 5.5 6.2 7.9 8.9 11.8 14.3

“T” Spade Thickness 1.15/1.40 1.35/1.60 1.75/2.00 2.25/2.50 3.15./3.40 4.15/4.40

“S” Spade Length (Ref.) 14.0 15.0 17.0 19.0 22.0 26.0

Up to 25mm +0.0 -0.8

Over 25mm to

+0.0 -1.6

Length Toler-ance

Length “L” (Overall) Part Number

10mm 75-04010 75-05010

14mm 75-03514 75-04014 75-05014 75-06014

16mm 75-04016 75-05016 75-06016 75-08016

20mm 75-04020 75-05020 75-06020 75-08020

25mm 75-04025 75-05025 75-06025 75-08025 75-10025

30mm 75-05030 75-06030 75-08030 75-10030

40mm 75-04040 75-05040 75-06040 75-08040 75-10040

50mm 75-05050 75-06050 75-08050 75-10050

All dimensions are in millimeters Also Available in Stainless Steel– Price on application



Easy Spot® “80” Inch Projection Weld PinEasy Spot “80”Inch Weld Screws have threeprecision projections located 120 degrees apart, under the head permitting through hole applications. The increased strength to surrounding metal makes the “80” useful as a stop, hinge pin, bearing surface or support.

Body Diameter .114/.117 .140/.144 .159/.163 .185/.190 .213/.218 .244/.250 .271/.277 .328/.335 .368/.375 .492/.500

“HD” Head Diameter .303/.323 .365/.385 .428/.448 .490/.510 .550/.575 .610/.635 .725/.755 .850/.880 .850/.880 .975/1.005

“HT” Head Thickness .042/.052 .058/.068 .058/.068 .073/.083 .073/.083 .073/.083 .089/.099 .104/.114 .120/.130 .136/.146

“A” Projection Diameter .045/.055 .065/.075 .075/.085 .085/.095 .095/.105 .095/.105 .115/.125 .125/.135 .125/.135 .145/.155

“B” Projection Height .018/.022 .023/.027 .028/.032 .033/.037 .038/.042 .038/.042 .043/.047 .048/.052 .048/.052 .058/.062

“80” Inch

Easy Spot “80” Inch Projection Weld Pin

R

Easy Spot “80”Inch Weld Screws have three precision projections located 120 degrees apart, un-der the head permitting through hole applications. The increased strength to surrounding metal makes the “80” useful as a stop, hinge pin, bearing surface or support

Length Tolerance


Part Number

Under 1” +.00 -.03

1”-2” +.00 -.06

1/4 80-1404 80-1904

5/16 80-1105 80-1405 80-1605 80-2505

3/8 80-1406 80-1906 80-2106 80-2506

1/2 80-1108 80-1408 80-1608 80-1908 80-2108 80-2508 80-3308 80-3708

5/8 80-1410 80-1910 80-2510 80-3310 80-3710

3/4 80-1612 80-1912 80-2512 80-2712 80-3312 80-3712 80-5012

1 80-1916 80-2516 80-2716 80-3316 80-3716

1 1/8 80-5018

1 1/4 80-1920 80-2520 80-3720

1 1/2 80-1924 80-2524

2 80-2532 80-3732




28

Easy Spot®


“82” Inch Projection Weld Pin

Easy Spot “82”Inch Weld Screws have threeprecision projections located 120 degrees apart, on top of the head eliminating the need for holes in the mating surface. They are recommended where appearance is a requirement.

Body Diameter .114/.117 .140/.144 .159/.163 .185/.190 .244/.250 .328/.335 .367/.375

“HD” Head Diameter .240/.260 .303/.323 .365/.385 .428/.448 .485/.510 .725/.755 .725/.755




“82” Inch


R

Easy Spot “82”Inch Weld Screws have three precision projections located 120 degrees apart, on top of the head eliminating the need for holes in the mating surface. They are recommended where appearance is a requirement.

Length Tolerance

Length “L” Under Head Part Number

Under 1” +.00 -.03

1”-2” +.00 -.06

1/4 82-1904

5/16 82-1105 82-2505

3/8 82-1406

1/2 82-1108 82-1408 82-1908 82-2508 82-3708

5/8 82-1910 82-3310

3/4 82-1112 82-1612 82-1912 82-2512

1 82-1916 82-2516 82-3716

1 1/4 82-1920 82-2520

2 82-2532 82-3732




82-1616


Easy Spot®“86” Inch Weld Pin

Body Diameter .114/.117 .140/.144 .159/.163 .185/.190 .244/.250 .328/.335 .367/.375

“HD” Head Diameter .240/.260 .303/.323 .365/.385 .428/.448 .485/.510 .725/.755 .725/.755




“82” Inch


R

Easy Spot “82”Inch Weld Screws have three precision projections located 120 degrees apart, on top of the head eliminating the need for holes in the mating surface. They are recommended where appearance is a requirement.

Length Tolerance

Length “L” Under Head Part Number

Under 1” +.00 -.03

1”-2” +.00 -.06

1/4 82-1904

5/16 82-1105 82-2505

3/8 82-1406

1/2 82-1108 82-1408 82-1908 82-2508 82-3708

5/8 82-1910 82-3310

3/4 82-1112 82-1612 82-1912 82-2512

1 82-1916 82-2516 82-3716

1 1/4 82-1920 82-2520

2 82-2532 82-3732




82-1616

Body Diameter .113/.119 .139/.144 .158/.163 .185/.190 .212/.218 .244/.250 .271/277

“W” Spade Width (Ref.) .218 .250 .312 .406 .375 .410 .437

“T” Thickness .042/.052 .058/.068 .058/.068 .058/.068 .089/.099 .110/.120 .120/.130

“S” Spade Length (Ref.) .562 .625 .688 .688 .750 .750 .875

“86” Inch

Easy Spot “86” Inch Weld Pin

R

Easy Spot “86”Inch Weld Pins have a spot weld spade 90 degrees to the body. May be used in confined areas. Recommended as a hinge or pivot pin.

Length Tolerance

Length “L” Overall Part Number

Under 1” +.000 -.031

3/8 86-1906

1/2 86-1108 86-1408 86-1608 86-1908 86-2108 86-2508

5/8 86-1410 86-1910 86-2110 86-2510 86-2710

3/4 86-1412 86-1912 86-2112 86-2512

1 86-1416 86-1916 86-2116 86-2516 86-2716




Easy Spot “86”Inch Weld Pins have a spot weld spade 90 degrees to the body. May be used in confined areas. Recommended as a hinge or pivot pin.

30

Easy Spot®


"90" & “94” Inch Leg Levellers

Easy Spot “94” Inch foot bolt levelers are a strong one piece construction. Full threads provide maximum adjustment. Beveled base facilitates moving. Also available end slotted for screwdriver or hexagon for wrench adjustment from above, or with type “F” thread flutes to facilitate cleaning paint from a threaded hole.

SlottedEnd

"H"Hexagon

Point

"F"Paint Scraper

Point

Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64

“94” Inch

Easy Spot “90” & “94” Inch Leg Levellers

R

Length “L” Part Number

1 94-2116 94-2716 94-3316

1 1/4 94-2120 94-2720 94-3320

1 1/2 94-2724 94-3324

2 94-3332

2 1/2 94-3340 94-440


PLAIN END

For Paint Scraper Point Suffix “Type F” to Plain Part Number. For Hexagon Point Suffix “Type H” to Plain Part Number.

SLOTTED END


1 94-3317

1 1/4 94-3321

1 1/2 94-2725 94-3325

2 1/2 94-3341 94-4441

Slotted End

Paint Scrapper Point “F”

Hexagon Point “H”

Easy Spot “94” Inch foot bolt levelers are a strong one piece con-struction. Full threads provide maximum adjustment. Beveled base facilitates moving. Also available end slotted for screwdriver or hexagon for wrench adjustment from above, or with type “F” thread flutes to facilitate cleaning paint from a threaded hole.

Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64

Easy Spot “90” Inch Levellers with a wide area, smooth base and a low silhouette are recommended where clearance is limited. The full thread allows maximum adjustment. Screw and base are securely resistance welded together

“90” Inch PART NUMBER SIZE LENGTH

“L” WIDTH A.F.

“W1” BASE BEARING

SURFACE “W2”

BASE THICKNESS

“T”

90-2116 1/4-20 1 1 3/8 1 1/8 5/64

90-2720 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-2721* 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-3332 3/8-16 2 1 3/8 1 1/8 5/64

*Slotted for Screw Driver Adjustment

Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64

“94” Inch


R


1 94-2116 94-2716 94-3316

1 1/4 94-2120 94-2720 94-3320

1 1/2 94-2724 94-3324

2 94-3332

2 1/2 94-3340 94-440


PLAIN END


SLOTTED END


1 94-3317

1 1/4 94-3321

1 1/2 94-2725 94-3325

2 1/2 94-3341 94-4441

Slotted End




Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64



“L” WIDTH A.F.


SURFACE “W2”

BASE THICKNESS

“T”

90-2116 1/4-20 1 1 3/8 1 1/8 5/64

90-2720 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-2721* 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-3332 3/8-16 2 1 3/8 1 1/8 5/64


Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64

“94” Inch


R


1 94-2116 94-2716 94-3316

1 1/4 94-2120 94-2720 94-3320

1 1/2 94-2724 94-3324

2 94-3332

2 1/2 94-3340 94-440


PLAIN END


SLOTTED END


1 94-3317

1 1/4 94-3321

1 1/2 94-2725 94-3325

2 1/2 94-3341 94-4441

Slotted End




Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64



“L” WIDTH A.F.


SURFACE “W2”

BASE THICKNESS

“T”

90-2116 1/4-20 1 1 3/8 1 1/8 5/64

90-2720 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-2721* 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-3332 3/8-16 2 1 3/8 1 1/8 5/64


Easy Spot “90” Inch Levellers with a wide area, smooth base and a low silhouette are recommended where clearance is limited. The full thread allows maximum adjustment. Screw and base are securely resistance welded together.

Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64

“94” Inch


R


1 94-2116 94-2716 94-3316

1 1/4 94-2120 94-2720 94-3320

1 1/2 94-2724 94-3324

2 94-3332

2 1/2 94-3340 94-440


PLAIN END


SLOTTED END


1 94-3317

1 1/4 94-3321

1 1/2 94-2725 94-3325

2 1/2 94-3341 94-4441

Slotted End




Thread Size 1/4-20 5/16-18 3/8-16 1/2-13

“W” Across Flats 9/16 3/4 7/8 1 1/16

“T” Base Height 3/32 7/64 9/64 11/64



“L” WIDTH A.F.


SURFACE “W2”

BASE THICKNESS

“T”

90-2116 1/4-20 1 1 3/8 1 1/8 5/64

90-2720 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-2721* 5/16-18 1 1/4 1 3/8 1 1/8 5/64

90-3332 3/8-16 2 1 3/8 1 1/8 5/64



Easy Spot® “96” Inch Leg Levellers

Easy Spot “96” Inch foot bolt levelers have a flat, smooth bearing surface to minimize floor marking. The screw is securely welded to the stamped base to withstand high torque loads. The “96” can also be used as an adjustment.

“96” Inch

Easy Spot “96” Inch Leg Levellers

R

Easy Spot “96”Inch foot bolt levelers have a flat, smooth bearing surface to minimize floor marking. The screw is securely welded to the stamped base to with-stand high torque loads. The “96” can also be used as an adjustment

1 96-2116 96-2716

1 1/4 96-2120 96-2720

1 1/2 96-2124 96-2724 96-3324 96-4424

1 3/4 96-2128 96-2728 96-3328

2 96-2132 96-2732 96-3332 96-4432

2 1/4 96-2736 96-3336

2 1/2 96-2740 96-3340 96-4440

3 96-4448

CAP SECTION

Cap No. Hex Size “W”

Cap Height “H”

Material Thickness

Thread Size “W” Across Flats

“T” Base Height

“L” Length

1/4-20 5/16-18 3/8-16 1/2-13

SEE CAP SELECTION

Part Number

25 15/16 .190 .039

1W 1-1/16 .190 .039

29 1-1/4 .250 .058

35 1-3/8 .150 .071

22A 1-3/8 .250 .044

22 1-3/8 .312 .044

28 1-3/8 .312 .058

All dimensions are inches. Each Leg Leveller can be provided with a variety of end caps. The final number will have the suffix of the desired cap. Example: 5/16-18 x 2 with a “C” style of a cap is part number 96-2732-C.

32

Easy Spot®


RETAINER NUT

Easy Spot RETAINER NUT

Page

R

Paulin P/N Nut Size

Nut Material

Retainer Material

Base Length A + B

Base Width

C

Base Thick.

D

Overall Height

T PCS/

Carton Pounds/ Carton

832SNR 8-32 Steel Steel 1– 1/2” 1/2” .045” 11/32” 2000 30

1024SNR 10-24 Steel Steel 1– 1/2” 1/2” .045” 11/32” 2000 36

1032SNR 10-32 Steel Steel 1– 1/2” 1/2” .045” 11/32” 2000 36

1420SNR 1/4-20 Steel Steel 1– 3/4” 9/16” .050” 7/16” 1000 29

1428SNR 1/4-28 Steel Steel 1– 3/4” 9/16” .050” 7/16” 1000 29

51618SNR 5/16-18 Steel Steel 2” 25/32” .050” 33/64” 500 29

51624SNR 5/16-24 Steel Steel 2” 25/32” .050” 33/64” 500 29

3816SNR 3/8-16 Steel Steel 2” 25/32” 050” 33/64” 500 27

3824SNR 3/8-24 Steel Steel 2” 25/32” 050” 33/64” 500 27

1213SNR 1/2-13 Steel Steel 2– 1/4” 15/16” .060” 33/64” 250 34

M610SNR M6 x 1.0 Steel Steel 1– 1/2” 1/2” .045” 11/32” 1000 29

M8125SNR M8 x 1.25 Steel Steel 2” 25/32” .055” 17/32” 1000 29

1420SZNR 1/4-20 Zinc Steel 1– 3/4” 9/16” .050” 7/16” 1000 29

51618SZNR 5/16-18 Zinc Steel 2” 25/32” .050” 33/64” 500 27

3816SZNR 3/8-16 Zinc Steel 2” 25/32” .050” 33/64” 500 29

Easy-Spot floating nut-retainer assemblies are available with steel nuts or zinc-plated steel nuts enclosed in steel retainers


Easy Spot®Easy Spot TECHNICAL INFORMATION R

Welding TYPES OF WELDING SPOT WELDING: This type of welding involves placing the two parts between two shaped copper/copper alloy-

PROJECTION WELDING: This type of welding involves placing the two parts between two

Three Basic Requirements: HEAT, TIME and PRESSURE HEAT: Both parts to be welded need to be brought up to the same welding temperature at the same

Weld Time Weld Current Weld Pressure Electrode Face Diameter Copper Alloy type Electrode alignment Cleanliness of parts TIME: Time is expressed in HZ (1 HZ = 1/60th

controlled are: Squeeze Time: Weld Time: Hold Time: PRESSURE: Pressure is used to assure good electrical path between both electrodes, and the two

Pressure too low:

points of the weld projections, producing strong and consistent weld.

TECHNICAL INFORMATION

34

Easy Spot®



Thread DataRolled threads: The process of squeezing the bolt between two grooved dies, thus cold forming the threads. This process generates no scrap, and produces a metallurgically stronger thread. External threads will meet Unified Standard Class 2A.

Cut threads: The process of tap cutting the threads, used on the majority of the nuts supplied. Generally better suited for internal threads, as it produces a very precise thread. Internal threads will meet Unified Standard Class 2B.

Coarse/Fine threads: The thread size is designated as part of the part description. For "inch" product, the de-scription "1/4-20" will mean that the outside diameter of the thread is 1/4", and 20 threads/inch. The higher the number (i.e. 1/4-28), the finer the thread.

Plating: Parts are supplied bare metal unless otherwise stated. After plating externally threaded parts are gaugeable to the BASIC PITCH DIAMETER when the plating is .0002 inches or less. Internally threaded parts have no allowance for plating and are not necessarily gaugeable after plating. When gauging, a light oil lubricant must be applied to both the gauge and the part to reduce the friction caused by plating.

Easy Spot TECHNICAL INFORMATION R

Thread Data Rolled threads: The process of squeezing the bolt between two grooved dies, thus cold forming the threads. This process generates no scrap, and produces a metallurgically stronger thread. External threads will meet Unified Standard Class 2A. Cut threads: The process of tap cutting the threads, used on the majority of the nuts supplied. Generally better suited for internal threads, as it produces a very precise thread. Internal threads will meet Unified Standard Class 2B. Coarse/Fine threads: The thread size is designated as part of the part description. For "inch" product, the description "1/4-20" will mean that the outside diameter of the thread is 1/4", and 20 threads/inch. The higher the number (i.e. 1/4-28), the finer the thread.. Plating: Parts are supplied bare metal unless otherwise stated. After plating externally threaded parts are gaugeable to the BASIC PITCH DIAMETER when the plating is .0002 inches or less. Internally threaded parts have no allowance for plating and are not necessarily gaugeable after plating. When gauging, a light oil lubricant

must be


Easy Spot®Easy Spot TECHNICAL INFORMATION R

FASTENER GRADE or CLASS SPECIFICATIONS BOLT/SCREWS: Grade (Inch), or Property Class (Metric) is the designation by number (i.e. grade 5, class 8.8), where increasing numbers represent increasing mechanical properties. The grade or property class of the fastener is identified on the fastener with either a symbol, or number, as outlined by the respective standards. Strength: It is defined as Proof Load, and Tensile Strength. The proof load is the amount of force required to cause the fastener to begin to stretch (elongation). The tensile strength is the amount of force required to pull the fastener apart or break. Hardness: Base Metal and Surface; measured in terms of Rockwell Hardness numbers, using various scales depending on the hardness of the steel. It refers to the depth of the impression made in the fastener during a very specific test. Chemical composition: All fasteners made of steel must conform to the chemical composition requirements for the respective grade or class. The amount of each element in the steel can determine the final fastener characteristics in strength and hardness. Heat treatment: The process used on fasteners to transform the steel to meet the specific mechanical properties of the grade. This process is not used on all fasteners, and is also dependent on the chemical Composition of the steel. NUTS: The nut is graded or classed in the same way as for bolt and screws. The difference is only in the strength measures. Strength is defined only as Proof Load, which is the load a nut can resist without failure by stripping or rupture and shall still be removable by hand after the test. Specific fastener specifications can be provided on request.

Inches (In) Millimeters (mm)

1/16 0.0625 1.5875

1/8 0.125 3.175

3/16 0.1875 4.7625

1/4 0.25 6.35

5/16 0.3125 7.9375

3/8 0.375 9.525

7/16 0.4375 11.112

1/2 0.50 12.70

9/16 0.5625 14.287

5/8 0.625 15.875

11/16 0.6875 17.4625

3/4 0.75 19.05

13/16 0.8125 20.6375

7/8 0.875 22.225

15/16 0.9375 23.812

1 1.00 25.40

Conversion Table—Inches to Millimeters (mm) Common Conversions

1 in = 25.4 millimeters

1 in = 2.54 centimeters (cm)

3.28 ft = 1 meter (m)

1 mile = 1.6 kilometers (km)

Length

MASS 1 oz = 28 grams (g)

2.2 lb.= 1 kilogram (kg)

2,200lb= 1 metric tonne

AREA 11 SQ FT = 1 SQ METER

VOLUME US GALLON =

3.78 LITERS

FORCE 3.6 OZ = 1 NEWTON (N)

FORCE 1 lbf = 4.4 NEWTON (N)

STRESS 145 PSI = 1 MEGAPASCAL (MPa)

STRESS 1000 PSI = 7 MPa

TORQUE 9 IN. LB. = 1 NEWTON ME-TERS (Nm.)

TORQUE 1FT. LB. = 1.4 Nm.


36

Easy Spot®


INDEX

Easy Spot Series Description Page

“02” Single Tab Weld Nut-Narrow Series 3

“03” Single Tab Metric Weld Nut-Narrow Series 3

“04” Single Tab Weld Nut with Target– Narrow Series 4

“05” Single Tab Metric Weld Nut with Target-Narrow Series 4

“06” Single Tab Spot Weld Nut– Wide Series 5

“07” Single Tab Metric Spot Weld Nut– Wide Series 5

“08” Bridge or Dual Tab Spot Weld Nut 6

“09” Bridge or Dual Metric Tab Spot Weld Nut 6

“10” Dual Tapped Spot Weld Nut 7-8

“20” 2 Ribbed Projection Weld Nut 9

“21” 2 Ribbed Projection Metric Weld Nut 10

“24” 4 Projection Weld Nut 11

“25” 4 Projection Metric Weld Nut 12

“26” Single Projection Weld Nut –Wide Series 13

“27” Single Projection Metric Weld Nut-Wide Series 13

“36” 3 or 6 Projection Standard Piloted Hex Weld Nut Type “E” 14

“37” 3 or 6 Projection Standard Piloted Metric Hex Weld Nut Type “E” 16

“38” 3 or 6 Projection Short Piloted Hex Weld Nut Type “E” 15

“39” 3 or 6 Projection Short Piloted Metric Hex Weld Nut Type “E” 16

“40” Piloted Projection Weld Nut Type “F” Standard Pilot 17

“41” Metric Piloted Projection Weld Nut Type “F” Standard Pilot 19

“42” Piloted Projection Weld Nut 18

“43” Metric Piloted Projection Weld Nut Type “F” Short Pilot 19

“50” 3 Under the Head Projection Weld Screw 20

“51” 3 Under the Head Projection Metric Weld Screw 20

“52” 3 Under the Head Sausage Projection Weld Screw 21

“54” 3 Top of the Head Projection Weld Screw 22

“55” 3 Top of the Head Metric Projection Weld Screw 22

“60” Ring Projection Weld Screw 23

“61” Ring Projection Metric Weld Screw 23

“70” 2 Projection Spade Screw 24

“74” 90 Degree Spade Weld Screw 25

“75” 90 Degree Metric Spade Weld Screw 26

“80” 3 Under the Head Projection Weld Pin 27

“81” 3 Under the Head Projection Metric Weld Pin 27

“82” 3 Top Projection Weld Pin 28

“83” 3 Top Projection Metric Weld Pin 28

“86” 90 Degree Spade Weld Pin 29

“90” Leg Leveller 30



See Page Retainer Nuts 32

12400 PLAZA DRIVE, PARMA, OH 44130-‐1057

2014

Dear Valued Customer,

With the acquisition of Paulin Industries, Inc by the Hillman Group out of Cincinnati, Oh

io in February 2013 we

have entered an exciting period in our history.

The Hillman Groups strong financial footing and experience in our indu

stry further strengthens and expands

our resources and ability to service your product needs.

Paulin stocks a complete range of quality Weld Fasteners and Lubrication fittings at our Parma location for

same day shipment to best service your needs.

We are supported by our manufacturing divisions that provide specialty bolts, nuts; stud

s, fittings and

specialty components produced in our cold forming and screw machine operations as well as locking

fasteners.

Please take a moment to review our new condensed Weld Fastener catalogue as well as the many other

products and services we provide.

We are an ISO approved source and provide a high quality pro

duct.

Our many product catalogues can be seen and downloaded in PDF format from our US web site at:

www.paulinusa.com

Thank you for your past support and we look forward to expanding our business

relationship with the many

products and services we can provide to you.

Yours sincerely,

Robert J. Finch General Manager

PAULIN INDUSTRIES, INC





60116011

Vancouver • Edmonton • Winnipeg • Toronto • Montreal • MonctonVancouver • Edmonton • Winnipeg • Toronto • Montreal • Moncton

Fluid Flow ComponentsComposantes pour un monde FluideFluid Flow ComponentsComposantes pour un monde Fluide

LP GAS PRODUCTS

BULK STORAGE

TRANSPORT/DELIVERY RESIDENTIAL

INDUSTRIAL / COMMERCIAL RECREATIONAL / OUTDOOR

GP410

®







EXPANSION PLUGSBOUCHONS D’EXPANSIONEXPANSION PLUGSBOUCHONS D’EXPANSION

EP410EP410

®®

®







OIL DRAIN PLUGSBOUCHONS DE VIDANGEOIL DRAIN PLUGSBOUCHONS DE VIDANGE

DP1090

®®

REPAIR LINES,

ADAPTORS, FITTINGS

AND TOOLS

COOLANT

BRAKE SYSTEM FUEL SYSTEM

TRANSMISSION

VANCOUVER • • • •EDMONTON WINNIPEG MONTREAL MONCTONH. Paulin & Co. Limited Toronto, Canada M1L 4N3

BL 107

Quality Tools

Division of H. Paulin & Co. Limited

INDUSTRIAL POWER BITS • NUTSETTERS • BIT HOLDERS • SCREWDRIVERS •TOOL KITS

PT 0606October, 2007

ISO 9001:2000 Certified

WP509

200920092009

VANCOUVER3179 Thunderbird Cres.Burnaby, BCV5A 3G1Tel: 604-421-3096Fax: 604-421-3046

EDMONTON11714 - 180th St.Edmonton, ABT5S 1N7Tel: 780-450-1346Fax: 780-463-3597

WINNIPEG1670A Inkster Ave.Winnipeg, MBR2X 2W8Tel: 204-694-3802Fax: 204-694-3804

MONTREAL2591 Rue DebrayLaval, QCH7S 2J4Tel: 450-688-4292Fax: 450-688-4750

MONCTON159 Henri Dunant St.Moncton, NBE1E 1E4Tel: 506-857-8658Fax: 506-857-9338




WHEEL PARTSPIECES DE ROUEWelcome to 's Online Catalogue

Please click here to begin...Welcome to 's Online Catalogue


Other ProductCataloguesAvailable

12400 Plaza Drive • Parma, Ohio 44130-1057p. 216.433.7633 f. 216.433.7622

Lubrication Fittings

www.paul inusa.com

PAULIN INDUSTRIES INC.12400 Plaza Drive, Unit 1Parma, Ohio 44130-1057

Tel: (216) 433-4132Fax: (216) 767-5911

1-800-935-3688

ROBERT J. FINCHGeneral Manager U.S. [email protected] Mobile: (216) 533-0700

Manufacturers & Distributors of Specialty Fasteners

www.PaulinUSA.com

Easy Spot Weld FastenersTechnical Expert ise Since 1952


p. 216.433.7633 f. 216.433.7622



p. 216.433.7633 f. 216.433.7622


Easy Spot Weld Fasteners - Paulin · PDF fileEasy Spot Weld Fasteners Technical Expertise...

Documents

Transcript of Easy Spot Weld Fasteners - Paulin · PDF fileEasy Spot Weld Fasteners Technical Expertise...