EASY MIX & MATCH - AccuQuilt · 2017-02-22 · EASY MIX & MATCH QUILT PATTERNS ... Sawtooth Star...

EASY MIX & MATCHQUILT PATTERNS

©2017 AccuQuilt to order call 888.258.7913 more patterns @ accuquilt.com C1702C-01

GO! Big® & GO!® Fabric Cutter Friendly

GO! Qube 9" Jewels & Gems Quilt featuring Robert Kaufman Fabrics

FREEpatterns

INSIDE

8

GO! QuQuQQQuQuuuQuQ bebe 999 Jewwwwweeeeeeeeewwew lssls &&& GGGGGGGGGGeeeememmmee s QuQQQQQuQuuuuuuuQuuuiiGO! QuQQuQQQQuQuuQuubbebe 99999""" Jewwwwwwweweweweeeewweewewelssssllllll &&&& GGGGGGGGGGGGGGGeeeeememmmee s QuQuQQQQuQuQuQQuQQuQuQQuQQuuQQuQ

©2016 AccuQuilt Code 72QBS-GO-REV 1download block patterns @ accuquilt.com call 888.258.7913

GO!® Mix & Match 72 Quilt Block SystemIn four easy steps, combine GO! shapes to create 6", 8", 9" & 12" pieced blocks like the 72 block ideas shown on the following pages. Numbers on the 72 blocks coordinate with dies listed below. Here’s how the system works:

h th

72system

block

2 2

2 2

3

3

4

4

44

5

5

5

5

5

5

5

5

5

6

5

5 5

75

5

5

57

8

8

4

45 5

5 5

1

STEP 1Choose one of the 72 block designs.

Flying X

52

STEP 2Select the finished block size you want.

6" Finished Block

8" Finished Block

9" Finished Block

12" Finished Block

STEP 3From the chart below, select the shapes needed as indicated on the block design.For the Flying X block, you need shapes 2 and 5.

52

STEP 4Match up the shapes on the left side of the chart, with the finished block size at the top of the chart, to select the correct GO! die(s) you need to create the block.

2GO! Square-23/4"(21/4" Finished) (55395)

GO! Half Square Triangle-21/4" Finished Square (55147)

5

Quilt Shapeby Number

GO! Square-31/2"(3" Finished)

55775 or 55006

GO! Square-41/2"(4" Finished)

55776, 55060 or 55018

GO! Square-5"(41/2" Finished)

55777 or 55010

GO! Square-61/2" (6" Finished)

55778* or 55000*

GO! Square-2" (11/2" Finished)

55775 or 55022

GO! Square-21/2" (2" Finished)

55776, 55059 or 55018

GO! Square-23/4"(21/4" Finished)

GO! Square-31/2” (3" Finished)

55778 or 55006

GO! Half Square Triangle-3" Finished Square55775 or 55009

GO! Half Square Triangle- 4" Finished Square 55776 or 55031

GO! Half Square Triangle- 41/2" Finished Square

55777 or 55397

GO! Half Square Triangle- 6" Finished Square 55778* or 55001*

GO! Quarter Square Triangle-3" Finished Square55775 or 55396

GO! Quarter Square Triangle- 4" Finished Square

55776, 55316 or 55047

GO! Quarter Square Triangle- 41/2" Finished Square

55777 or 55398

GO! Quarter Square Triangle- 6" Finished Square

55778*, 55002 or 55456

GO! Half Square Triangle-11/2" Finished Square

55775 or 55319

GO! Half Square Triangle- 2" Finished Square

55776, 55063 or 55018

GO! Half Square Triangle- 21/4" Finished Square

55777 or 55147

GO! Half Square Triangle- 3" Finished Square

55778, 55009 or 55456

GO! Square on Point-25/8"(21/8" Finished)

55775 or 55394

GO! Square on Point-31/4" (23/4" Finished)

55776 or 55317

GO! Square on Point-311/16"(33/16" Finished) 55777 or 55106

GO! Square on Point-43/4" (41/4" Finished)

55778 or 55019

GO! Parallelogram 45°-21/4" x 213/16" Sides (11/2" x 21/8" Finished)

55775 or 55402

GO! Parallelogram 45°-23/4" x 31/2" Sides

(21/16" x 213/16" Finished) 55776 or 55318

GO! Parallelogram 45°-215/16" x 37/8" Sides (21/4" x 33/16" Finished)

55777 or 55148

GO! Parallelogram 45°-311/16" x 415/16" Sides

(3" x 41/4" Finished) 55778* or 55004

GO! Rectangle-2" x 31/2"

(11/2" x 3" Finished) 55775 or 55158

GO! Rectangle-21/2" x 41/2"

(2" x 4" Finished) 55776 or 55159

GO! Rectangle-23/4" x 5"

(21/4" x 41/2" Finished) 55777 or 55107

GO! Rectangle-31/2" x 61/2"

(3" x 6" Finished) 55778* or 55005

1

2

3

4

5

6

7

8

6" Finished Block 8" Finished Block 9" Finished Block 12" Finished Block

GO! Qube™ Item #’s (listed first) or GO! Die Item #’s (sold separately) *not compatible with GO! Baby

55777 or 55395

Original 36 blocks © Jean Ann Wright, Editor, Quilt Magazine


GO!® Mix & Match 72 Quilt Block SystemChoose the quilt block you’d like to create from 72 different block designs.

72system

block

3

5

Airplane Blockade

5

4

Boat

2 5

64

5

Broken Sash Clay’s Choice

2 545

6

Broken Dishes

4

6

5

Depression

2 4

6

5

Diamond Star

3

5

Double Cross

5

3

2

Double X

2

5 3

Double XDouble 4-Patch

21

4

5

Dutchman’s Puzzle

1

5

Flashing Windmills

3 5

Flock of Geese Flying Birds

5 2 4

5

7

6

Flying TrianglesFlower Basket

5

3

8

Flying X

52

4-Patch

15

42

4-Patch Star Frayed 4-Patch

2 8

5

2

4

Free Trade4-Patch Variation

5

61

Freezer Jam

2

4

7

Hourglass Star

542

35

4

Hourglass Star

2 2 3

Jewel Box

54

8

LouisianaHovering Hawks

52

54

Magic Pinwheel

4

57

Magic Triangles

3

Mill Wheel Mosaic No. 10

5

6

4

Mosaic No. 13

54

7

Mosaic No. 6

5

6

7


GO!® Mix & Match 72 Quilt Block SystemChoose the quilt block you’d like to create from 72 different block designs.

72system

block

Mosaic No. 15

54

6

4

5

Peace & PlentyMosaic No. 17

5

5

2 3

Old Maid’s Puzzle

2

5

PinwheelMosaic No. 22

5

5

2

4

Pinwheel Star Ribbons

54

7

4

6

5

Port & Starboard Red & White Cross

5

7

Road to Oklahoma

52

2

4

Propeller

1

2

4

5

Sawtooth Star Sixteen Patch

25 2

3

School Girl’s Puzzle

5

Simplicity

5 2 3

SpinnerSchool Girl’s Puzzle

5 2

2

5 3

Spool Susannah Variation

2

8

5

6

Stargaze

52

7

Susannah Variation

2

5

6

Trellis

2 7

5

Susannah

2

5

6

6

5

Triangles & Squares Whirlpool

534

Turnstile Uneven 9-Patch

2

8 1

5

67

Windblown SquaresTwo by Two

8

2 5

4

Windmill

4

Yankee PuzzleWindmill Variation

5

4

Yankee Puzzle

5

Zero

5 7

2

6

X Block

52

©2015 AccuQuilt PQ10695

GO! Qube 6" Diamond Star Throw Quilt

Finished Size 48" x 60"

For use with GO! Qube™ Mix & Match 6" Block (55775)

Fabric provided by Robert Kaufman Fabrics

Fabric Color

Shape & # GO! Dies Used Number of Shapes to Cut

Fabric Required for One Block

Bright Blue

2 GO! Square-2" (1½" Finished) (55702)

Cut 5—4½” x width of fabric (WOF) strips.

Fanfold into 4½” widths. Sub cut into

160—2” squares

1¾ yards

Bright Blue

4 GO! Quarter Square Triangle-3" Finished Square (55704)

Cut 5—4¾” x WOF strips. Fanfold into

4¾” widths. Sub cut into 160—3" finished

quarter square triangles

Yardage included above

Bright Blue

5 GO! Half Square Triangle-1½" Finished Square (55705)

Cut 4—5¼” x WOF strips. Fanfold into

27/8” widths. Sub cut into 160—1½" finished half square triangles


Gray Print

5 GO! Half Square Triangle-1½" Finished Square (55705)



2 yards


Gray Print

6 GO! Square on Point-2⅝" (2⅛" Finished) (55706)

Cut 4—31/8” x WOF strips. Fanfold into

31/8” widths. Sub cut into 40—2⅝" squares

on point


Gray Print

GO! Strip Cutter-2½" (2" Finished) (55017 or 55014)

Cut 6—2½" x WOF strips for binding


White 2 GO! Square-2" (1½" Finished) (55702)

Cut 5—4½” x width of fabric (WOF) strips.

Fanfold into 4½” widths. Sub cut into

160—2” squares

3 yards

White 4 GO! Quarter Square Triangle-3" Finished Square (55704)

Cut 5—4¾” x WOF strips. Fanfold into

4¾” widths. Sub cut into 160—3" finished

quarter square triangles


White 5 GO! Half Square Triangle-1½" Finished Square (55705)




White 6 GO! Square on Point-2⅝" (2⅛" Finished) (55706)

Cut 4—31/8” x WOF strips. Fanfold into

31/8” widths. Sub cut into 40—2⅝" squares

on point


Additional Fabrics Needed:

Backing Fabric—54” x 66" Batting—54" x 66"

Sewing Directions:

1. Lay out four bright blue 1½" finished half square triangles (HSTs) and one white 2⅝" square on point.


2. Pin and sew one bright blue 1½" finished HST to each side of one white 2⅝" square on point to create a square in square unit as shown. Press seams toward the bright blue HSTs. Make 40 units.

3. Lay out two white 1½" finished HST and one bright blue 3" finished quarter square triangle (QST).

4. Pin and sew one white 1½" finished HST on either side of the bright blue 3" finished QST to form a flying geese unit as shown. Press seams toward white HSTs. Make 160 units.

5. Lay out four bright blue 2" squares, four flying geese units, and one square in a square unit to create a GO! Diamond Star Block as shown.

6. Pin and sew three rows. Press seams away from the flying geese units.

7. Pin and sew three row units together to form one block. Press seams toward the center row. Make 40 blocks.

8. Lay out four white 1½" finished HSTs and one gray print 2⅝" square on point.

9. Pin and sew one white 1½" finished HST to each side of one gray print 2⅝" square on point to create a square in square unit as shown. Press seams toward the white HSTs. Make 40 units.

10. Lay out two gray print 1½" finished HST and one white 3" finished QST.

11. Pin and sew one gray print 1½" finished HST on either side of the white 3" finished QST to form a flying geese unit as shown. Press seams toward white HSTs. Make 160 units.


12. Lay out four white 2" squares, four flying geese units, and one square in a square unit to create a GO! Diamond Star Block as shown.

13. Pin and sew three rows. Press seams toward the flying geese units.

14. Pin and sew three row units together to form one block. Press seams away from the center row. Make 40 blocks.

15. Lay out alternating blocks in 10 rows of eight using the quilt diagram as a reference.

16. Pin and sew 10 rows. Press seams in alternating directions for each row.

17. Pin and sew 10 row units together. Press seams toward the added rows.

Quilting and Finishing:

1. Layer batting between quilt top and backing.

2. Pin or baste layers together.

3. Quilt as desired.

4. Add gray print fabric binding, mitering corners.


King Size

Additional Size Options:

For a full size quilt measuring 84" x 90" make a total of 210 quilt blocks - 105 bright blue/white and 105 gray print/white. Lay out alternating blocks in 15 rows of 14 using the first diagram below as a reference.

For a king size quilt measuring 108" x 96" make a total of

288 quilt blocks - 144 bright blue/white and 144 gray print/white. Lay out alternating blocks in 16 rows of 18 using the second diagram below as a reference.

Full Size

of 8 ©2015 AccuQuilt PQ10687

GO! Qube 6" Table Trends Table Runner Finished Size: 8½" x 30½"


Fabrics are from the Soho Solids and Pop Basics Collections and are provided by Timeless Treasures Fabrics Please note: The Old Maid’s Puzzle, Red & White Cross, 4-Patch, Triangles & Squares and School Girl’s Puzzle 6” blocks are used for our samples. Substitute other same-sized blocks, if desired.

To make a 6" Block use GO! Qube™ Mix & Match 6" Block (55775) GO! Square-3½" (3" Finished) (Shape 1) GO! Square-2" (1½" Finished) (Shape 2) GO! Half Square Triangle-3" Finished Square (Shape 3) GO! Half Square Triangle-1½" Finished Square (Shape 5) GO! Square on Point-25/8" (21/8" Finished) (Shape 6) GO! Parallelogram 45°- 2¼" x 213/16" Sides (1½" x 21/8" Finished) (Shape 7)

Cutting Directions:

Fabric Color

Shape & # Number of Shapes to Cut Fabric Required for One Block

Red- Orange Print

3

Cut 1, 4¾" x 4" rectangle. Lay on die and sub-cut 2 HSTs.

1/4 yard

Red- Orange Print

Cut 2, 4" x 4" squares. Lay on die and sub-cut 2 squares.

Yardage

included above 1


Fabric Color


Red- Orange Print

Cut 1, 4½" x 4½" square. Lay on die and sub-cut 4 squares.

Yardage

included above Orange Print

3

Cut 1, 4¾" x 4" rectangle. Lay on die and sub-cut 2 HSTs.

3/8 yard

Orange Print

Cut 4, 5" x 2" rectangles. Lay fabric right side up on die and cut 4 parallelograms.

Yardage


5

Cut 1, 5½" x 3" rectangle. Lay on die and sub-cut 4 HSTs.

Yardage


Cut 2, 4" x 4" squares. Lay on die and sub-cut 2 squares.

Yardage

included above Yellow Print

Cut 4, 5" x 2" rectangles. Lay fabric wrong side up on die and cut 4 parallelograms.

1/4 yard

Yellow Print

5


Yardage

included above Yellow Print


Yardage

included above Lime Green Print

5


1/4 yard

Lime Green Print

6

Cut 2, 3" x 3" square. Lay on die and sub-cut 2 square on point.

Yardage

included above

2

7

1

7

2


Fabric Color


Avocado Green Solid

5


1/4 yard

Avocado Green Solid

6

Cut 2, 3" x 3" square. Lay on die and sub-cut 2 square on point.

Yardage

included above Yellow Solid

5


1/4 yard

Yellow Solid


Yardage

included above

Additional Cutting Directions: From the Red-Orange Print

o Cut 4 rectangles, 1½" x 6½", for borders From the Orange Print

o Cut 2 strips using GO! Strip Cutter-2¼" (1¾" Finished) (55053) for binding o Cut 3 rectangles, 1½" x 6½", for borders

From the Yellow Print o Cut 3 rectangles, 1½" x 6½", for borders

Sewing Directions: Press seams open and use ¼" seams, unless otherwise indicated.

1. Make five pieced block for the table runner. Instructions for the blocks used in our samples are listed on the following pages.

2


Old Maid’s Puzzle Block

1. Join one lime green print and one avocado green solid small half square triangle (HST) together along the long edge to make one HST unit. Press the seam open. Make 4 HST units.

2. Arrange two HST units and two yellow print squares in two rows as shown. Join the squares to the HSTs along adjacent sides and press the seams open. Sew the two rows together, matching the seams, and press the seam open to make a quarter block unit. Make two quarter block units.

3. Join one large red-orange print and one large orange print HST together along the long edges to make one large HST unit. Press the seam open. Make two large HST units.

4. Join one lime green print and one avocado green solid small half square triangle (HST) together along the long edge to make one HST unit. Press the seam open. Make 4 HST units.

5. Arrange two HST units and two yellow print squares in two rows as shown. Join the squares to the HSTs along adjacent sides and press the seams open. Sew the two rows together, matching the seams, and press the seam open to make a quarter block unit. Make two quarter block units.

6. Join one large red-orange print and one large orange print HST together along the long edges to make one large HST unit. Press the seam open. Make two large HST units.

7. Arrange the two quarter block units and two large HST units in two rows. Sew the units in each row together along adjacent edges. Press the seams open. Sew the two rows together, matching seam lines. Press the seams open.


Red & White Cross Block

1. Join one yellow solid and one avocado green solid small HST together along the long edge to make one HST unit. Press the seam open. Make two yellow solid/avocado green solid and two lime green print/avocado green solid HST units.

2. Sew one yellow print and one orange print parallelogram together along one long edge as shown, stopping ¼" from the upper edge. Press the seams open.

3. Sew one yellow solid small HST to each long edge of one joined pair of parallelograms. Press the seams open. Join one yellow solid/avocado green solid HST unit to the parallelograms, placing the avocado green solid side of the HST unit next to the parallelograms. Start and stop the stitching ¼" from the corner of the squares. Press the seams away from the square to complete the corner unit. Make two identical corner units.

4. Repeat step three to make two more corner units, using lime green print small HSTs and lime green print/avocado green solid HST units.

5. Arrange the corner units in two rows as shown. Join the units in each row together, matching seams. Press the seams open. Join the rows together, matching seams. Press the seams open.


4-Patch Block

1. Arrange two red-orange print and two orange print large squares in two rows of two squares each. Sew the squares in each row together along adjacent edges. Press the seams open.

2. Sew the two rows together, matching seam lines. Press the seams open.

Triangles & Squares Block

1. Arrange one lime green print square on point and four yellow print small HSTs as shown.

2. Join the triangles to the square along adjacent edges. Press the seams open. Make a total of two lime green print/yellow print quarter block units.

3. Repeat steps 1 and 2 with an avocado green solid square on point and four lime green print small HSTs. Make two avocado green solid/lime green print quarter block units.

4. Arrange the quarter block units in two rows of two units each, alternating the units by color. Join the units in each row together, and press the seams open. Join the rows together, matching seam lines.


School Girl’s Puzzle No. 2 Block

1. Join one yellow solid and one avocado green solid HST together along the long edge to make one HST unit. Press the seam open. Make six yellow solid/avocado green solid and four orange print/lime green print HST units.

2. Arrange three yellow solid/avocado green solid HSTs and one avocado green solid small square in two rows as shown. Sew the units in each row together along adjacent edges. Press the seams open. Sew the two rows together, matching seams, to make one A quarter block. Press the seam open. Make two A quarter blocks.

3. Arrange two orange print/lime green print HSTs and two red-orange print squares in two rows as shown. Sew the units in each row together along adjacent edges. Press the seams open. Sew the two rows together, matching seams, to make one B quarter block. Press the seam open. Make two B quarter blocks.

4. Arrange the A and B quarter blocks into two rows as shown. Sew the quarter blocks in each row together along adjacent edges. Press the seams open. Sew the rows together, matching seams. Press the seam open.


Assemble the Table Runner

1. Referring to the table runner assembly diagram, arrange the pieced blocks in one vertical row of five blocks. Place one border strip on either side of each block.

2. Matching the long edges, join the border strips to the sides of each block. Press the seams toward the border strips. Join the bordered blocks along adjacent edges, matching seamlines. Press the seams open.


1. Layer the batting between the table runner top and backing, with the wrong sides facing the batting. Pin or baste the layers together. Quilt as desired.

2. Trim the batting and backing even with the table runner top edges.

3. Sew the binding strips together along the short ends, using either straight or diagonal seams. Press each strip in half lengthwise, with wrong sides together. Stitch the binding to the table runner front, matching raw edges and mitering corners. Fold the binding to the table runner back, encasing the raw edges. Hand stitch the binding to the table runner back.

of 5©2016 AccuQuilt PQ11012

GO! Qube 8" Pencil Me In Wall HangingFinished Size: 42½" x 18½"

For use with GO! Qube™Mix & Match 8" Block (55776)

Fabrics are from the Cirrus Solids Collection and are provided by Cloud 9 Fabrics

To make an 8" Block use GO! Qube Mix & Match 8" Block (55776)GO! Square-2½" (2" Finished) (Shape 2)GO! Quarter Square Triangle-4" Finished Square (Shape 4)GO! Half Square Triangle-2" Finished Square (Shape 5)GO! Rectangle-2½" x 4½" (2" x 4" Finished) (Shape 8)

Additional Dies Needed:GO! Strip Cutter-2¼" (1¾" Finished) (55053)

Cutting Directions:Fabric Color

Shapes to Cut Number of Shapes to Cut Fabric Required

Variety of White and Off-white Solids

Cut a total of: 49 Small Squares (Shape 2)12 Small Half Square Triangles (HSTs) (Shape 5)12 Rectangles (Shape 8)

5/8 yards total

Light TanCut:

6 Quarter Square Triangles (QSTs) (Shape 4) for pencil tips6 Rectangles (Shape 8) for pencil wood

1/4 yard total


Fabric Color


Six Brightly Colored Solids

Cut a total of: 16 Small Squares (Shape 2)26 Rectangles (Shape 8)

¼ yard of each

Brightly Colored Solids (slightly lighter or darker than those above)

Cut: 1 Rectangle (Shape 8) from each 6” x 6” scrap (for a total of 6 rectangles)

1—6” x 6” scrap of each

Medium or Dark Grey Solid

Cut: 6 Rectangles (Shape 8)

1 1/8 yards(Reserve remaining yardage for binding

and backing)

Additional Cutting Directions:Binding

o Cut 3—2¼" strips using GO! Strip Cutter-2¼" (1¾" Finished) (55053) for binding—Yardage included above

Additional Fabrics Needed:Batting: 45" x 21"

Sewing Directions:Press all seams open and use ¼” seams, unless otherwise indicated.

Make the Pencil Blocks

1. Referring to the quilt photo for color placement, select two rectangles (Shape 8) in different shades of the same color. Sew the rectangles together along one long edge. Press the seams open.


2. On the right side of one light tan QST (Shape 4), mark a line ¾" from the point as shown. Cut a 1½" x 2" rectangle the same color as one of the Step 1 rectangles from the remaining fabric. This will be the pencil tip. With right sides together, align one long edge of the rectangle with the marked line. Sew the rectangle to the QST (Shape 4), using a ¼" seam allowance. Fold the wrong side of the rectangle to the right side of the QST (Shape 4) and press.

3. Join a white or off-white small HST (Shape 5) to each short side of the step 2 QST. Trim, then press the seam allowances toward the HSTs. Trim the excess fabric from the color rectangle even with the outer edges of the HSTs.

4. Arrange the joined rectangles from step 1, the QST unit from step 3, one light tan and one medium or dark grey rectangle (Shape 8) as shown. Join the QST unit to the light tan rectangle. Join the medium or dark grey rectangle to the step 1 rectangles. Join the two sections to make the pencil unit.

5. Add one white or off-white rectangle (Shape 8) to each end of the pencil unit to make a pencil block. Repeat to make a total of 6 pencil blocks.

Assemble the Quilt Top

1. Join 7 white or off-white squares (Shape 2) together to make a sashing strip. Make 7 sashing strips.


2. Referring to the Wall Hanging Assembly Diagram, arrange the 6 Pencil Blocks and 7 sashing strips in one vertical row, rotating every other pencil block so that the pencils point in opposite directions. Join the blocks and strips together along adjacent edges.

3. Referring to the assembly diagram for placement, arrange the remaining color rectangles (Shape 8) and squares (Shape 2) around the center pencil block/sashing unit. Join the rectangles and squares along adjacent short edges, making two long side borders of 7 rectangles and 6 squares each, and a top and bottom border of 3 rectangles and 2 squares each.

4. Join one long side border to each side of the center unit, ending the seams ¼" from each edge where the rectangles extend past the center unit. Join the top and bottom borders to the center unit, ending the seam ¼" from the edge where the rectangles extend past the center unit. Fold the borders right sides together at the corners, aligning raw edges, and complete the seams.


1. Layer the batting between the wall hanging top and backing, with the wrong sides facing the batting.



4. Sew the binding strips together along the short ends, using straight or diagonal seams. Press the strip in half lengthwise, with wrong sides


together. Stitch the binding to the quilt front, matching raw edges and mitering corners. Fold the binding to the quilt back, encasing the raw edges. Hand stitch the binding to the quilt back.


GO! Qube 8" Quilted PillowFinished Size: 8" x 8" x 8"


Fabrics are from the Soho Solids and Pop BasicsCollections and are provided by Timeless Treasures Fabrics

Please note: The School Girl’s Puzzle, Diamond Star, Propeller, Mosaic, Old Maid’s Puzzle and Mill Wheelblocks are used in the pillow shown here. Substitute other same-sized blocks, if desired.

To make an 8" Block use GO! Qube Mix & Match 8" Block (55776)GO! Square-2½" (2" Finished) (Shape 2)GO! Half Square Triangle-4" Finished Square (Shape 3)GO! Quarter Square Triangle-4" Finished Square (Shape 4)GO! Half Square Triangle-2" Finished Square (Shape 5)GO! Square on Point-3¼" (2¾" Finished) (Shape 6)



White Cut 1, 5½" x 5½" square. Lay on die and

sub-cut 2 squares.3/8 yard

White 5Cut 9, 3¾" x 3" rectangles. Lay on die and sub-cut 18 half square triangles (HSTs).


White 4Cut 3, 6" x 6" squares. Lay on die and cut 12 quarter square triangles (QSTs).


2


Fabric Color


Lime Green Print

Cut 3, 5½" x 5½" squares. Lay on die and sub-cut 12 squares.

3/8 yard

Lime Green Print 3

Cut 1, 5¼" x 5¼" square. Lay on die and cut 2 HSTs.


Lime Green Print 4

Cut 1, 6" x 6" square. Lay on die and cut 4 QSTs.


Lime Green Print

5 Cut 4, 3¾" x 3" rectangles. Lay on die and sub-cut 8 HSTs.


Lime Green Print 6

Cut 1, 3¾" x 3¾" square. Lay on die and cut 1 square on point.


Dark Blue Print

Cut 1, 5½" x 5½" square. Lay on die and cut 4 squares.

3/8 yard

Dark Blue Print 3

Cut 2, 5¼" x 5¼" squares. Lay on die and cut 3 HSTs.


Dark Blue Print



Dark Blue Print 6

Cut 1, 3¾" x 3¾" square. Lay on die and cut 1 square on point.


Light Blue Solid 3

Cut 2, 5¼" x 5¼" squares. Lay on die and cut 4 HSTs.

1/4 yard

Coral Solid 3


1/4 yard

Coral Solid 5 Cut 6, 3¾" x 3" rectangles. Lay on die and sub-cut 12 HSTs.


2

2


Fabric Color


Medium Green Solid 3


1/4 yard

Medium Green Solid 4

Cut 2, 6" x 6" squares. Lay on die and cut 8 QSTs.


Medium Green Solid



Additional Fabrics Needed:Batting: 28" x 36"Backing: 7/8 yardPolyester Fiberfill

Sewing Directions:Press all seams open and use ¼” seams, unless otherwise indicated.Make six pieced blocks for the Qube pillow. Instructions for the blocks used in our sample are listed below.

School Girl’s Puzzle Block

1. Join one white and one light blue print half square triangle (HST) (Shape 5) together along the long edge to make one HST unit. Press the seam open. Make six white/light blue print and four coral/bright lime green print HST units.

2. Arrange three white/light blue print HST units and one light blue print square (Shape 2) in two rows as shown. Sew the units in each row together along adjacent edges. Press the seams open. Sew the two rows together, matching seams, to make one A quarter block. Press the seams open. Make two A quarter blocks.

3. Arrange two coral/bright lime green print HST units and two bright lime green print squares (Shape 2) in two rows as shown. Sew the units in each row together along adjacent edges. Press the seams open. Sew the two rows together, matching seams, to make one B quarter block. Press the seam open. Make two B quarter blocks.


4. Arrange the A and B quarter blocks into two rows as shown. Sew the quarter blocks in each row together along adjacent edges. Press the seams open. Sew the rows together, matching seams. Press the seam open.

Diamond Star Block

1. Sew one white HST (Shape 5) to each edge of the dark blue print square on point (Shape 6) to make the center unit. Press the seams open.

2. Sew one coral HST (Shape 5) to either short edge of a white quarter square triangle (QST) (Shape 4) to make a Flying Geese unit. Press the seams open. Make four Flying Geese units.

3. Arrange the center unit, four Flying Geese units and four bright lime green printsquares (Shape 2) in three rows of three units each as shown. Sew the units in each row together along adjacent edges. Press the seams open. Sew the rows together, matching seam lines. Press the seams open.


Propeller Block

1. Arrange two white and two dark blue print squares (Shape 2) in two rows of two squares each. Sew the squares in each row together and press the seams open. Sew the rows together, matching seamlines to make the center unit. Press the seams open.

2. Sew the long edge of one bright lime green print quarter square triangle (QST) (Shape 4) to each side of the center unit. Press the seams away from the center unit.

3. Sew one white and one medium green QST (Shape 4) together along one short edge as shown to make a corner unit. Press the seams open. Make 4 corner units.

4. Join one corner unit to each side of the center unit, matching the seam line of the corner unit with the corner of the square. Press the seams away from the center unit.

Mosaic Block

1. Sew the long edge of one dark blue print HST (Shape 5) to each side of one bright lime green square on point (Shape 6) to make the center unit. Press the seams open.

2. Sew the long edge of one white HST (Shape 5) to each short edge of a medium green QST (Shape 4) to make a Flying Geese unit. Press the seams open. Make two Flying Geese units.

3. Join one Flying Geese unit to the top and bottom of the center unit, positioning the Flying Geese units as shown. Press the seams open.


4. Arrange one medium green and two white QSTs (Shape 4) and two bright lime green print HSTs (Shape 5) as shown. Sew the triangles together along adjacent edges. Press the seams open.

5. Sew one Step 4 unit to either side of the center unit. Press the seams open.

Old Maid’s Puzzle Block

1. Join one white and one medium green HST (Shape 5) together along the long edge to make one HST unit. Press the seam open. Make four HST units.

2. Arrange two HST units and two bright lime green squares (Shape 2) in two rows as shown. Join the squares to the HSTs along adjacent sides and press the seams open. Sew the two rows together, matching the seams, and press the seams open to make a quarter block unit. Make two quarter block units.

3. Join one dark blue print and one light blue solid HST (Shape 3) together along the long edges to make one large HST unit. Press the seam open. Make two large HST units.


4. Arrange the two quarter block units and two large HST units in two rows as shown. Sew the units in each row together along adjacent edges. Press the seams open. Sew the two rows together, matching seam lines. Press the seams open.

Mill Wheel Block

1. Sew one bright lime green print and one coral solid HST (Shape 3) together along the long edges to make one HST unit. Press the seam open. Make two bright lime green print/coral solid, one dark blue print/medium green solid, and one medium green/light blue HST units.

2. Arrange the HSTs in two rows of two units each as shown. Sew the units in each row together along adjacent edges. Press the seams toward the light red triangles.

3. Join the two rows together, matching the center seams.


Assemble the Qube Pillow

1. Referring to the pillow assembly diagram, arrange the pieced blocks in two intersecting rows. Join the blocks together along adjacent sides, matching seamlines when possible and starting and stopping stitching ¼" from seam ends. Press the seams open.

2. Layer the batting between the pillow top and backing, with the wrong sides facing the batting. Pin or baste layers together. Quilt as desired.

3. Stitch around the perimeter of the pillow top, close to the outer edge. Trim the batting and backing even with the outer edges of the pillow top. Clip into the corners at block seam lines, cutting up to, but not into the seams.

4. With right sides together, align edges of adjacent blocks, matching lettered sides (beginning with A, B, C, etc.) as indicated on the assembly diagram. Pin, then sew block edges together, starting and stopping ¼" from seam ends, to form the corners of the Qube pillow. Backstitch to reinforce the seams. Leave a 3" to 4" opening along one edge for turning.

5. Turn the pillow right side out through the opening. Use a turning tool or ballpoint bodkin to smooth the seams and define corners.

6. Firmly stuff the pillow with fiberfill, making sure to fill each corner. Fold the seam allowances to the inside along the opening and handstitch the opening closed.


GO! Qube 9" Jewels and Gems QuiltFinished Size: 54½" x 72½"


Fabrics are provided by Robert Kaufman Fabrics

To make a 9" Block use GO! Qube Mix & Match 9" Block (55777)GO! Square-2¾" (2¼" Finished) (Shape 2)GO! Half Square Triangle-4½" Finished Square (Shape 3)



Shape & # Number of Shapes to Cut Fabric Required

WhiteCut 16, 3¼" x width of fabric (WOF) strips. Fanfold into 3¼" widths and cut 192 squares.

3½ yards

White 3Cut 7, 5 5/8" x WOF strips. Fanfold into 5 5/8" widths and cut 96 half square triangles (HST).


2


Fabric Color


Assorted Fat Quarters

Cut , 3¼" x width of fabric (WOF) stripsfrom each fat quarter. Fanfold into 3¼"widths and cut 16 squares from each fatquarter color for a total of 192 squares.

12 Fat Quarters

Assorted Fat Quarters 3

Cut , 5 5/8" x WOF strips from each fatquarter. Fanfold into 5 5/8" widths and cut 8HSTs from each fat quarter color for a total of96 HSTs.



o Cut 7 strips using GO! Strip Cutter-2¼" (1¾" Finished) (55053) for binding

Additional Fabrics Needed:Binding: ¾ yardBacking: 3 3/4 yardsBatting: Twin Size


1. Join one print square (Shape 2) and one white square (Shape 2) together and press.Make 16 units with each fat quarter color for a total of 192 units.

Make 16 units with each fat quarter fabric.

2


2. Stitch two like units from Step 1 together to make a 4-Patch unit and press. You should have a total of 8—4-Patch units of each fat quarter fabric. Make 96 total.

Make 8 units of each fat quarter fabric.

3. Join one white HST (Shape 3) and one print HST (Shape 3) together and press open. Make 8 units with each fat quarter color for a total of 96 units.

Make 96 units total (8 units from each color).

4. Join one unit from Step 2 and one unit from Step 3 making sure to select fabric from the same fat quarter fabric units together as shown. Make 8 units from each fat quarter color for a total of 96 units. Press.

Make a total of 96 units.

5. Join 2 like units from Step 4 togther to make a total of 48 blocks. You should have a total of 4 like blocks of each fat quarter color for a total of 48. Press.

Make 48 blocks.



1. Lay out all the blocks into 8 rows of 6 blocks. Move the blocks around until you are happy with the lay out. Once you are satisfied with the arrangement, stitch each row together making sure to keep the order and then again replace each row back into the original position until all the rows are stitched.

2. Sew each row to the next, pressing in between until all the rows are together.


1. Layer quilt top with batting and backing.



4. Attach bias binding, mitering the corners.


GO! Qube 9" Windy QuiltFinished Size: 54½" x 72½"



To make a 9" Block use GO! Qube Mix & Match 9" Block (55777)GO! Half Square Triangle-4½" Finished Square (Shape 3)GO! Quarter Square Triangle-4½" Finished Square (Shape 4)


Cutting Directions:FabricColor


White 3Cut 16, 5¾" x width of fabric (WOF) strips. Fanfold into 5¾" widths and cut 192 half square triangles (HSTs).

5 yards

White 4

Cut 16, 5½" x width of fabric (WOF) strips. Fanfold into 3¼" widths and cut 192 quarter square triangles (QST).



Fabric Color


Orange 4

Cut 8, 5½" x width of fabric (WOF) strips. Fanfold into 3¼" widths and cut 96 QSTs. 1 1/4 yards

Pink 4

Cut 8, 5½" x width of fabric (WOF) strips. Fanfold into 3¼" widths and cut 96 QSTs. 1 3/4 yard


o Cut 7—2¼" strips of pink fabric using GO! Strip Cutter-2¼" (1¾" Finished) (55053) for binding—Yardage included above

Additional Fabrics Needed:Backing: 62½" x 80½"Batting: 62½" x 80½"


1. Sew one white quarter square triangle (QST) (Shape 4) and one pink QST (Shape 4) together as shown. Press seams towards the pink fabric. Make a total of 96 white and pinkQST units.

2. Repeat Step 1 using one white QST (Shape 4) and one orange QST (Shape 4) to make a total of 96 white and orange QST units. Press seams towards the orange fabric.

3. Sew one white half square triangle (HST) (Shape 3) to each of the units from Step 1 and Step 2 making a total of 196 units. There will be 96 pink units and 96 orange units as shown.


4. Join two pink units from Step 3 together and press. Make a total of 48 units a shown.

5. Repeat Step 4 using the orange units from Step 3 to make a total of 48 orange units.

6. Join two pink units from Step 4 together to make one finished pink block as shown. Make 24 blocks.

7. Repeat Step 6 using orange units from Step 5 to make 24 finished orange blocks.


Assemble the Quilt Top:

1. Referring to the quilt assembly diagram, lay out all the blocks into 8 rows of 6 blocks. Sew the blocks together alternating each row so one starts with pink and the next with orange. Press the seams in opposite directions on alternating rows.

2. Matching the block seams, sew the rows together.


GO! Qube 12" Peaks and Valleys Throw QuiltFinished Size: 36" x 42"



To make a 12" Block use GO! Qube Mix & Match 12" Block (55778)GO! Quarter Square Triangle-6" Finished Square (Shape 4)GO! Half Square Triangle-3" Finished Square (Shape 5)GO! Square on Point-4¾" (4¼" Finished) (Shape 6)




Light Blue 5Cut 2, 4¾" x width of fabric (WOF) strips. Fanfold into 4" widths and cut 36 half square triangles (HSTs).

1/2 yard

Dark Blue 4

Cut 2, 7¾" x width of fabric (WOF) strips. Fanfold into 7¾" widths and cut 36 quarter square triangles (QST).

5/8 yard


Fabric Color


Light Green 4

Cut 2, 7¾" x width of fabric (WOF) strips. Fanfold into 7¾" widths and cut 30 QSTs. 1 1/8 yards

Light Green 5Cut 4, 4¾" x width of fabric (WOF) strips. Fanfold into 4" widths and cut 72 HSTs.


Dark Green 4


1 yard

Dark Green 5Cut 2, 4¾" x width of fabric (WOF) strips. Fanfold into 4" widths and cut 24 HSTs.


White 6 Cut 2, 5¼" x WOF strips. Fanfold into 5¼" widths and cut 9 squares on point. 1/2 yard


o Cut approximately 180" of 2¼" strips using GO! Strip Cutter-2¼" (1¾" Finished) (55053) for binding

Additional Fabrics Needed:Binding: Dark Green Fabric—Yardage included aboveBacking: 42" x 48"Batting: 42" x 48"



Square in a Square Block

1. Sew a light blue half square triangle (HST) (Shape 5) onto each side of a white square on point (Shape 6). Press seams towards the light blue fabric. Make a total of 9 Square in a Square Blocks.

Hour Glass Block

1. Sew two dark blue quarter square triangles (QST) (Shape 4) with two light greenQST’s (Shape 4) as shown. Make a total of 9 Hour Glass Blocks.


Flying Geese Units

1. Sew a light green HST (Shape 5) onto both short edges of a dark green QST (Shape 4). Press seams towards the light green fabric. Make a total of 18 Light Green/Dark Green Flying Geese units.

2. Sew a light green HST (Shape 5) onto both short edges of a dark blue QST (Shape 4). Press seams towards the light green fabric. Make a total of 18 Light Green/Dark Blue Flying Geese Units.

3. Sew a dark green HST (Shape 5) onto both short edges of a light green QST (Shape 4). Press seams towards the light green fabric. Make a total of 12 Dark Green/Light Green Flying Geese Units.



1. Lay out 9 Square in a Square Blocks, 9 Hour Glass Blocks, 18 Light Green/Dark Green Flying Geese Units, 18 Light Green/Dark Blue Flying Geese Units and 12 Dark Green/Light Green Flying Geese Units as shown.

2. Sew units within each column together then sew columns together to complete the quilt.


GO! Qube 12" Woven Bed RunnerFinished Size: 24" x 60"



To make a 12" Block use GO! Qube Mix & Match 12" Block (55778)GO! Quarter Square Triangle-6" Finished Square (Shape 4)GO! Half Square Triangle-3" Finished Square (Shape 5)GO! Square on Point-4¾" (4¼" Finished) (Shape 6)GO! Parallelogram 45°-3 11/16" x 4 15/16" Sides (3" x 4¼" Finished) (Shape 7)GO! Rectangle-3½" x 6½" (3" x 6" Finished) (Shape 8)




Pink 4


1 1/3 yards

Pink 5Cut 3, 4¾" x WOF strips. Fanfold into 4"widths and cut 60 half square triangles (HST).


Dark Pink 5Cut 2, 4¾" x 4" rectangles. Place on die and cut 4 HST’s.

1/2 yard

Dark Pink 7Cut 8, 3¼" x 8" rectangles. Place fabric on die (as shown) and cut 8 parallelograms.



Orange 5Cut 1, 4¾" x WOF strips. Fanfold into 4" widths and cut 20 half square triangles (HST).

5/8 yard

Orange 8 Cut 1, 7" x WOF strips. Fanfold into 7½" widths and cut 10 rectangles.


White 4

Cut 2, 7¾" x width of fabric (WOF) strips. Fanfold into 7¾" widths and cut 30 QST’s.

1 1/8 yards

White 6 Cut 2, 5¼" x WOF strips. Fanfold into 5¼" widths and cut 12 squares on point.



o Cut approximately 200" of 2¼" strips using GO! Strip Cutter-2¼" (1¾" Finished) (55053) for binding

Additional Fabrics Needed:Binding: ½ yard of Dark Pink Fabric – Yardage included aboveBacking: 30" x 66"Batting: 30" x 66"


Square in a Square Block1. Sew a pink half square triangle (HST) (Shape 5) onto each side of a white square on

point (Shape 6). Press seams towards the pink fabric. Make a total of 12 Square in a Square Blocks.


Hour Glass Block

1. Sew two pink quarter square triangles (QST) (Shape 4) with two white QST’s (Shape 4) as shown. Make a total of 15 Hour Glass Blocks.

Half Square Triangle Units

1. Join one dark pink HST (Shape 5) and one orange HST (Shape 5) together along the long edge to make one HST unit. Make a total of 4 HST units.

Flying Geese Units1. Sew a pink HST (Shape 5) onto both short edges of a white QST (Shape 4). Press

seams towards the pink fabric. Make a total of 6 Flying Geese units.


Parallelogram Geese Units

1. Sew an orange HST (Shape 5) onto both short edges of a dark pink parallelogram (Shape 7). Press seams towards the orange fabric. Make a total of 8 Parallelogram Geese Units.


1. Lay out 12 Square in a Square Blocks, 15 Hour Glass Blocks, 8 Parallelogram Geese Units, 6 Flying Geese Units, 10 orange rectangles (Shape 8) and 4 HST units as shown.

2. Sew units within each column together. Then sew columns together to complete the quilt.

EASY MIX & MATCH - AccuQuilt · 2017-02-22 · EASY MIX & MATCH QUILT PATTERNS ... Sawtooth Star...

Documents

Transcript of EASY MIX & MATCH - AccuQuilt · 2017-02-22 · EASY MIX & MATCH QUILT PATTERNS ... Sawtooth Star...