Easter Bunny Paper Model - Oakmere Primary · Easter Bunny Paper Model You will need: • Easter...

2
Easter Bunny Paper Model You will need: • Easter Bunny template • Scissors • Glue 1. Carefully cut out the template, making sure to cut along all solid black lines. 2. Fold along all the doed lines. Look carefully at the key to see which way each section needs to be folded. 3. Next, add some glue to tabs 1 and 2 and stick them underneath the square-shaped section which has two curved lines on it. 4. Add glue to tab 3 and stick to the underside of the section with the Twinkl logo. 5. Add some glue to tabs 4 and 5 then stick to the underside of the bunny’s legs. 6. Next, put some glue on tabs 6 and 7 then stick the glued sides of these tabs to the sides of the bunny’s head. 7. Then add some glue to tab 8 and stick it to the back of the bunny’s head. 8. Next, glue tabs 9 and 10 to the underside of the bunny’s nose. visit twinkl.com

Transcript of Easter Bunny Paper Model - Oakmere Primary · Easter Bunny Paper Model You will need: • Easter...

Page 1: Easter Bunny Paper Model - Oakmere Primary · Easter Bunny Paper Model You will need: • Easter Bunny template • Scissors • Glue 1. Carefully cut out the template, making sure

Easter Bunny Paper ModelYou will need:

• Easter Bunny template

• Scissors

• Glue

1. Carefully cut out the template, making sure to cut along all solid black lines.

2. Fold along all the dotted lines. Look carefully at the key to see which way each section needs to be folded.

3. Next, add some glue to tabs 1 and 2 and stick them underneath the square-shaped section which has two curved lines on it.

4. Add glue to tab 3 and stick to the underside of the section with the Twinkl logo.

5. Add some glue to tabs 4 and 5 then stick to the underside of the bunny’s legs.

6. Next, put some glue on tabs 6 and 7 then stick the glued sides of these tabs to the sides of the bunny’s head.

7. Then add some glue to tab 8 and stick it to the back of the bunny’s head.

8. Next, glue tabs 9 and 10 to the underside of the bunny’s nose.

visit twinkl.com

Page 2: Easter Bunny Paper Model - Oakmere Primary · Easter Bunny Paper Model You will need: • Easter Bunny template • Scissors • Glue 1. Carefully cut out the template, making sure

9. Finally, glue the front of the bunny to tab 11, making sure the bunny’s front paws are pointing forwards.

10. Make sure the bunny’s tail and ears are folded to sit correctly.

Easter Bunny Paper Model

Your Easter Bunny model is now complete! Happy Easter!

visit twinkl.com