Karl SPECHT

Maintenance Organisation Oversight Section Manager Flight Standards Directorate

2018(D)54513 ksp/gfe/FSl Cologne, 06.11.2018

The Quality Manager

AIRPLANE TECHNICS LLC 191, MONK GABRIEL SALOSI AVE. 0144 TBILISI GEORGIA

Subject: Initial issue of EASA Part-145 approval certificate

Reference: FS 04/Rev 0/EASA.145.0828

Enclosure: EASA Part-145 approval certificate

Dear Sir or Madam,

Following a positive recommendation for a Part-145 approval from null for:

Airplane Technics LLC

The European Aviation Safety Agency hereby encloses your EASA Part-145 approval certificate reference:

EASA.145.0828

Karl SPECHT

Cc: DGAC-FR

Certification and Approval Support Department, EASA

4 4 * * * * * * t 4

Postal address: Postfach 10 12 53, 50452 Cologne, Germany Visiting Address: Konrad-Adenauer-Ufer 3 50668 Cologne, Germany

An agency of the European Union

Tel.: +49 221 8999 4151 E-mail: f145recommendations@easa.europa.eu Web: www.easa.europa.eu ISO 9001 Certified TE.GEN.00101-005

»»»

Page 1 of 2

MAINTENANCE ORGANISATION APPROVAL CERTIFICATE

-- ---

Reference: EASA.145.0828

Pursuant to Regulation (EC) N° 216/2008 of the European Parliament and of the Council and to Commission Regulation (EU) N1321/2014 for the time being in force and subject to the conditions specified below, the Agency hereby certifies:

AIRPLANE TECHNICS LLC 191, MONK GABRIEL SALOSI AVE.

0144 TBILISI GEORGIA

as a maintenance organisation in compliance with Section A of Annex II (Part-145) of Regulation (EU) N 1321/2014, approved to maintain the products, parts and appliances listed in the attached approval schedule and issue related certificates of release to service using the above references.

CONDITIONS:

1. This approval is limited to that specified in the scope of work section of the approved maintenance organisation exposition as referred to in Section A of Annex II (Part-145), and

2. This approval requires compliance with the procedures specified in the approved maintenance organisation exposition, and

3. This approval is valid whilst the approved maintenance organisation remains in compliance with Annex II (Part-145) of Regulation (EU) N° 1321/2014.

4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked.

Date of original issue: 06 Nov 2018

Date of this ran: -- .Zlt For the Agency

Revision N°: Initial

EASA Form 3- 145 Issue 3

Page 2 of 2

MAINTENANCE ORGANISATION APPROVAL SCHEDULE

Reference: EASA.145.0828 Organisation: AIRPLANE TECHNICS LLC

191, MONK GABRIEL SALOSI AVE. 0144 TBILISI GEORGIA

CLASS RATING LIMITATION BASE LINE AIRCRAFT Al Aeroplanes above Airbus A318/A319/A320/ A321 NO YES

5700kg Boeing 737-300/400/500 NO YES Boeing 737-600/700/800/900 NO YES

CLASS RATING LIMITATION COMPONENTS C20 Structural Components in accordance with the OTHER THAN Capability List defined in the COMPLETE Company MOE. ENGINES OR APUs

This approval schedule is limited to those products, parts and appliances and to the activities specified in the scope of work section of the approved maintenance organisation exposition,

Maintenance Organisation Exposition Reference: Part 145 MOE (ATL)

Date of original issue: 01 Mar 2018

n approved: 01 Mar 2018

Signed:

Issue N: 01 Revision N°: 00

For the Agency

EASA Form 3- 145 Issue 3